| Current Path : /compat/linux/proc/68247/cwd/usr/local/sbin/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/cwd/usr/local/sbin/apxs |
#!/usr/local/bin/perl
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
##
## apxs -- APache eXtenSion tool
## Written by Ralf S. Engelschall <rse@apache.org>
##
require 5.003;
use strict;
package apxs;
##
## Configuration
##
my $CFG_TARGET = q(httpd); # substituted via Makefile.tmpl
my $CFG_CC = q(cc); # substituted via Makefile.tmpl
my $CFG_CFLAGS = q(-DHARD_SERVER_LIMIT=1024 -DDOCUMENT_LOCATION="/usr/local/www/data" -DDEFAULT_PATH="/usr/local/bin:/bin:/usr/bin" -DACCEPT_FILTER_NAME="httpready" -DMAX_SPAWN_RATE=64 -DDYNAMIC_MODULE_LIMIT=32 -DSTACK=_STACK -DFD_SETSIZE=8192 -funsigned-char -DMOD_SSL=208131 -DEAPI -DEAPI_MM -O2 -pipe -DNO_IDEA -fno-strict-aliasing `../apaci`); # substituted via Makefile.tmpl
my $CFG_CFLAGS_SHLIB = q(-fPIC -DSHARED_MODULE); # substituted via Makefile.tmpl
my $CFG_LD_SHLIB = q(gcc); # substituted via Makefile.tmpl
my $CFG_LDFLAGS_SHLIB = q(-shared); # substituted via Makefile.tmpl
my $CFG_LIBS_SHLIB = q(); # substituted via Makefile.tmpl
my $CFG_PREFIX = q(/usr/local); # substituted via APACI install
my $CFG_SBINDIR = q(/usr/local/sbin); # substituted via APACI install
my $CFG_INCLUDEDIR = q(/usr/local/include/apache); # substituted via APACI install
my $CFG_LIBEXECDIR = q(/usr/local/libexec/apache); # substituted via APACI install
my $CFG_SYSCONFDIR = q(/usr/local/etc/apache); # substituted via APACI install
##
## Cleanup the above stuff
##
$CFG_CFLAGS =~ s|^\s+||;
$CFG_CFLAGS =~ s|\s+$||;
$CFG_CFLAGS =~ s|\s+`.+apaci`||;
##
## parse argument line
##
# defaults for parameters
my $opt_n = '';
my $opt_g = '';
my $opt_c = 0;
my $opt_o = '';
my @opt_D = ();
my @opt_I = ();
my @opt_L = ();
my @opt_l = ();
my @opt_W = ();
my @opt_S = ();
my $opt_e = 0;
my $opt_i = 0;
my $opt_a = 0;
my $opt_A = 0;
my $opt_q = 0;
# default for DSO file extension
my $dso_ext = "so";
if ($^O eq "cygwin") {
$dso_ext = "dll";
}
# this subroutine is derived from Perl's getopts.pl with the enhancement of
# the "+" metacharater at the format string to allow a list to be build by
# subsequent occurance of the same option.
sub Getopts {
my ($argumentative, @ARGV) = @_;
my (@args, $first, $rest, $pos);
my ($errs) = 0;
local ($_);
local ($[) = 0;
@args = split( / */, $argumentative);
while(@ARGV && ($_ = $ARGV[0]) =~ /^-(.)(.*)/) {
($first, $rest) = ($1,$2);
if ($_ =~ m|^--$|) {
shift(@ARGV);
last;
}
$pos = index($argumentative,$first);
if ($pos >= $[) {
if ($args[$pos+1] eq ':') {
shift(@ARGV);
if ($rest eq '') {
unless (@ARGV) {
print STDERR "apxs:Error: Incomplete option: $first (needs an argument)\n";
++$errs;
}
$rest = shift(@ARGV);
}
eval "\$opt_$first = \$rest;";
}
elsif ($args[$pos+1] eq '+') {
shift(@ARGV);
if ($rest eq '') {
unless (@ARGV) {
print STDERR "apxs:Error: Incomplete option: $first (needs an argument)\n";
++$errs;
}
$rest = shift(@ARGV);
}
eval "push(\@opt_$first, \$rest);";
}
else {
eval "\$opt_$first = 1";
if ($rest eq '') {
shift(@ARGV);
}
else {
$ARGV[0] = "-$rest";
}
}
}
else {
print STDERR "apxs:Error: Unknown option: $first\n";
++$errs;
if ($rest ne '') {
$ARGV[0] = "-$rest";
}
else {
shift(@ARGV);
}
}
}
return ($errs == 0, @ARGV);
}
sub usage {
print STDERR "Usage: apxs -g [-S <var>=<val>] -n <modname>\n";
print STDERR " apxs -q [-S <var>=<val>] <query> ...\n";
print STDERR " apxs -c [-S <var>=<val>] [-o <dsofile>] [-D <name>[=<value>]]\n";
print STDERR " [-I <incdir>] [-L <libdir>] [-l <libname>] [-Wc,<flags>]\n";
print STDERR " [-Wl,<flags>] <files> ...\n";
print STDERR " apxs -i [-S <var>=<val>] [-a] [-A] [-n <modname>] <dsofile> ...\n";
print STDERR " apxs -e [-S <var>=<val>] [-a] [-A] [-n <modname>] <dsofile> ...\n";
exit(1);
}
# option handling
my $rc;
($rc, @ARGV) = &Getopts("qn:gco:I+D+L+l+W+S+eiaA", @ARGV);
&usage if ($rc == 0);
&usage if ($#ARGV == -1 and not $opt_g);
&usage if (not $opt_q and not ($opt_g and $opt_n) and not $opt_i and not $opt_c and not $opt_e);
# argument handling
my @args = @ARGV;
my $name = 'unknown';
$name = $opt_n if ($opt_n ne '');
# overriding of configuration variables
if (@opt_S) {
my ($opt_S);
foreach $opt_S (@opt_S) {
if ($opt_S =~ m/^([^=]+)=(.*)$/) {
my ($var, $val) = ($1, $2);
my $oldval = eval "\$CFG_$var";
unless ($var and $oldval) {
print STDERR "apxs:Error: no config variable $var\n";
&usage;
}
$val=~s/"/\\"/g;
eval "\$CFG_${var}=\"${val}\"";
} else {
print STDERR "apxs:Error: malformatted -S option\n";
&usage;
}
}
}
##
## Initial DSO support check
##
if ($^O ne "MSWin32") {
if (not -x "$CFG_SBINDIR/$CFG_TARGET") {
print STDERR "apxs:Error: $CFG_SBINDIR/$CFG_TARGET not found or not executable\n";
exit(1);
}
if (not grep(/mod_so/, `$CFG_SBINDIR/$CFG_TARGET -l`)) {
print STDERR "apxs:Error: Sorry, no DSO support for Apache available\n";
print STDERR "apxs:Error: under your platform. Make sure the Apache\n";
print STDERR "apxs:Error: module mod_so is compiled into your server\n";
print STDERR "apxs:Error: binary `$CFG_SBINDIR/$CFG_TARGET'.\n";
exit(1);
}
}
##
## Operation
##
# helper function for executing a list of
# system command with return code checks
sub execute_cmds {
my (@cmds) = @_;
my ($cmd, $rc);
foreach $cmd (@cmds) {
print STDERR "$cmd\n";
$rc = system("$cmd");
if ($rc != 0) {
printf(STDERR "apxs:Break: Command failed with rc=%d\n", $rc >> 8);
exit(1);
}
}
}
if ($opt_g) {
##
## SAMPLE MODULE SOURCE GENERATION
##
if (-d $name) {
print STDERR "apxs:Error: Directory `$name' already exists. Remove it first\n";
exit(1);
}
my $data = join('', <DATA>);
$data =~ s|%NAME%|$name|sg;
$data =~ s|%TARGET%|$CFG_TARGET|sg;
$data =~ s|%DSO_EXT%|$dso_ext|sg;
my ($mkf, $src) = ($data =~ m|^(.+)-=#=-\n(.+)|s);
print STDERR "Creating [DIR] $name\n";
system("mkdir $name");
print STDERR "Creating [FILE] $name/Makefile\n";
open(FP, ">${name}/Makefile") || die;
print FP $mkf;
close(FP);
print STDERR "Creating [FILE] $name/mod_$name.c\n";
open(FP, ">${name}/mod_${name}.c") || die;
print FP $src;
close(FP);
exit(0);
}
if ($opt_q) {
##
## QUERY INFORMATION
##
my $result = '';
my $arg;
foreach $arg (@args) {
my $ok = 0;
my $name;
foreach $name (qw(
TARGET CC CFLAGS CFLAGS_SHLIB LD_SHLIB LDFLAGS_SHLIB LIBS_SHLIB
PREFIX SBINDIR INCLUDEDIR LIBEXECDIR SYSCONFDIR
)) {
if ($arg eq $name or $arg eq lc($name)) {
my $val = eval "\$CFG_$name";
$result .= "${val}##";
$ok = 1;
}
}
if (not $ok) {
printf(STDERR "apxs:Error: Invalid query string `%s'\n", $arg);
exit(1);
}
}
$result =~ s|##$||;
$result =~ s|##| |g;
print $result;
}
if ($opt_c) {
##
## DSO COMPILATION
##
# split files into sources and objects
my @srcs = ();
my @objs = ();
my $f;
foreach $f (@args) {
if ($f =~ m|\.c$|) {
push(@srcs, $f);
}
else {
push(@objs, $f);
}
}
# determine output file
my $dso_file;
if ($opt_o eq '') {
if ($#srcs > -1) {
$dso_file = $srcs[0];
$dso_file =~ s|\.[^.]+$|.$dso_ext|;
}
elsif ($#objs > -1) {
$dso_file = $objs[0];
$dso_file =~ s|\.[^.]+$|.$dso_ext|;
}
else {
$dso_file = "mod_unknown.$dso_ext";
}
}
else {
$dso_file = $opt_o;
}
# create compilation commands
my @cmds = ();
my $opt = '';
my ($opt_Wc, $opt_I, $opt_D);
foreach $opt_Wc (@opt_W) {
$opt .= "$1 " if ($opt_Wc =~ m|^\s*c,(.*)$|);
}
foreach $opt_I (@opt_I) {
$opt_I = '"' . $opt_I . '"' if ($opt_I =~ m|\s|);
$opt .= "-I$opt_I ";
}
foreach $opt_D (@opt_D) {
$opt .= "-D$opt_D ";
}
my $cflags = "$CFG_CFLAGS $CFG_CFLAGS_SHLIB";
if ($^O eq "MSWin32") {
my $d = $dso_file;
$d =~ s|\.so$||;
$d = '"' . $d . '"' if ($d =~ m|\s|);
$opt .= "-Fd$d ";
}
my $s;
foreach $s (@srcs) {
my $o = $s;
$s = '"' . $s . '"' if ($s =~ m|\s|);
if ($^O ne "MSWin32") {
$o =~ s|\.c$|.o|;
$o =~ s|^.*/||;
$o = '"' . $o . '"' if ($o =~ m|\s|);
push(@cmds, "$CFG_CC $cflags -I$CFG_INCLUDEDIR $opt -c $s");
} else {
$o =~ s|\.c$|.obj|;
$o =~ s|^.*/||;
$o = '"' . $o . '"' if ($o =~ m|\s|);
push(@cmds, "$CFG_CC $cflags -I\"$CFG_INCLUDEDIR\" $opt -c $s -Fo$o");
}
unshift(@objs, $o);
}
# create link command
my $cmd;
if ($^O ne "MSWin32") {
$cmd = "$CFG_LD_SHLIB $CFG_LDFLAGS_SHLIB -o $dso_file";
} else {
$cmd = "$CFG_LD_SHLIB $CFG_LDFLAGS_SHLIB -out:\"$dso_file\"";
}
my $o;
foreach $o (@objs) {
$cmd .= " $o";
}
$opt = '';
my ($opt_Wl, $opt_L, $opt_l);
foreach $opt_Wl (@opt_W) {
if ($CFG_LD_SHLIB !~ m/gcc$/) {
$opt .= " $1" if ($opt_Wl =~ m|^\s*l,(.*)$|);
} else {
$opt .= " -W$opt_Wl";
}
}
foreach $opt_L (@opt_L) {
if ($^O ne "MSWin32") {
$opt .= " -L$opt_L";
} else {
$opt .= " -libpath:\"$opt_L\"";
}
}
foreach $opt_l (@opt_l) {
if ($^O ne "MSWin32") {
$opt .= " -l$opt_l";
} else {
$opt .= " $opt_l";
}
}
$cmd .= $opt;
$cmd .= " $CFG_LIBS_SHLIB";
push(@cmds, $cmd);
# execute the commands
&execute_cmds(@cmds);
# allow one-step compilation and installation
if ($opt_i or $opt_e) {
@args = ($dso_file);
}
}
if ($opt_i or $opt_e) {
##
## DSO INSTALLATION
##
# determine installation commands
# and corresponding LoadModule/AddModule directives
my @lmd = ();
my @amd = ();
my @cmds = ();
my $f;
foreach $f (@args) {
if ($f !~ m|\.$dso_ext$|) {
print STDERR "apxs:Error: file $f is not a DSO\n";
exit(1);
}
my $t = $f;
if ($^O ne "MSWin32") {
$t =~ s|^.+/([^/]+)$|$1|;
if ($opt_i) {
push(@cmds, "cp $f $CFG_LIBEXECDIR/$t");
push(@cmds, "chmod 755 $CFG_LIBEXECDIR/$t");
}
}
else {
$t =~ s|^.+[/\\]([^/\\]+)$|$1|;
if ($opt_i) {
push(@cmds, "copy \"$f\" \"$CFG_LIBEXECDIR/$t\"");
}
}
# determine module symbolname and filename
my $filename = '';
if ($name eq 'unknown') {
$name = '';
my $base = $f;
$base =~ s|\.[^.]+$||;
if (-f "$base.c") {
open(FP, "<$base.c");
my $content = join('', <FP>);
close(FP);
if ($content =~ m|.*module\s+(?:MODULE_VAR_EXPORT\s+)?([a-zA-Z0-9_]+)_module\s*=\s*.*|s) {
$name = "$1";
$filename = "$base.c";
$filename =~ s|^.+/||;
$filename =~ s|^.+\\|| if ($^O eq "MSWin32");
}
}
if ($name eq '') {
if ($base =~ m|.*mod_([a-zA-Z0-9_]+)\..+|) {
$name = "$1";
$filename = $base;
$filename =~ s|^.+/||;
$filename =~ s|^.+\\|| if ($^O eq "MSWin32");
}
}
if ($name eq '') {
print STDERR "apxs:Error: Sorry, cannot determine bootstrap symbol name.\n";
print STDERR "apxs:Error: Please specify one with option `-n'.\n";
exit(1);
}
}
if ($filename eq '') {
$filename = "mod_${name}.c";
}
my $dir = $CFG_LIBEXECDIR;
$dir =~ s|^$CFG_PREFIX/?||;
$dir =~ s|(.)$|$1/|;
push(@lmd, sprintf("LoadModule %-18s %s", "${name}_module", "$dir$t"));
push(@amd, sprintf("AddModule %s", $filename));
}
# activate module via LoadModule/AddModule directive
if ($opt_a or $opt_A) {
my $cfgbase = "$CFG_SYSCONFDIR/$CFG_TARGET";
if (not -f "$cfgbase.conf") {
print STDERR "apxs:Error: Config file $cfgbase.conf not found\n";
exit(1);
}
open(FP, "<$cfgbase.conf") || die;
my $content = join('', <FP>);
close(FP);
if ($content !~ m|\n#?\s*LoadModule\s+|) {
print STDERR "apxs:Error: Activation failed for custom $cfgbase.conf file.\n";
print STDERR "apxs:Error: At least one `LoadModule' directive already has to exist.\n";
exit(1);
}
my $lmd;
my $c = '';
$c = '#' if ($opt_A);
foreach $lmd (@lmd) {
my $what = $opt_A ? "preparing" : "activating";
if ($content !~ m|\n#?\s*$lmd|) {
# check for open <containers>, so that the new LoadModule
# directive always appears *outside* of an <container>.
my $before = ($content =~ m|^(.*\n)#?\s*LoadModule\s+[^\n]+\n|s)[0];
# the '()=' trick forces list context and the scalar
# assignment counts the number of list members (aka number
# of matches) then
my $cntopen = () = ($before =~ m|^\s*<[^/].*$|mg);
my $cntclose = () = ($before =~ m|^\s*</.*$|mg);
if ($cntopen == $cntclose) {
# fine. Last LoadModule is contextless.
$content =~ s|^(.*\n#?\s*LoadModule\s+[^\n]+\n)|$1$c$lmd\n|s;
}
elsif ($cntopen < $cntclose) {
print STDERR 'Configuration file is not valid. There are '
. "sections closed before opened.\n";
exit(1);
}
else {
# put our cmd after the section containing the last
# LoadModule.
my $found =
$content =~ s!\A ( # string and capture start
(?:(?:
^\s* # start of conf line with a
(?:[^<]|<[^/]) # directive which does not
# start with '</'
.*(?:$)\n # rest of the line.
# the '$' is in parentheses
# to avoid misinterpreting
# the string "$\" as
# perl variable.
)* # catch as much as possible
# of such lines. (including
# zero)
^\s*</.*(?:$)\n? # after the above, we
# expect a config line with
# a closing container (</)
) {$cntopen} # the whole pattern (bunch
# of lines that end up with
# a closing directive) must
# be repeated $cntopen
# times. That's it.
# Simple, eh? ;-)
) # capture end
!$1$c$lmd\n!mx;
unless ($found) {
print STDERR 'Configuration file is not valid. There '
. "are sections opened and not closed.\n";
exit(1);
}
}
} else {
# replace already existing LoadModule line
$content =~ s|^(.*\n)#?\s*$lmd[^\n]*\n|$1$c$lmd\n|s;
}
$lmd =~ m|LoadModule\s+(.+?)_module.*|;
print STDERR "[$what module `$1' in $cfgbase.conf]\n";
}
my $amd;
foreach $amd (@amd) {
if ($content !~ m|\n#?\s*$amd|) {
# check for open <containers> etc. see above for explanations.
my $before = ($content =~ m|^(.*\n)#?\s*AddModule\s+[^\n]+\n|s)[0];
my $cntopen = () = ($before =~ m|^\s*<[^/].*$|mg);
my $cntclose = () = ($before =~ m|^\s*</.*$|mg);
if ($cntopen == $cntclose) {
$content =~ s|^(.*\n#?\s*AddModule\s+[^\n]+\n)|$1$c$amd\n|s;
}
elsif ($cntopen < $cntclose) {
# cannot happen here, but who knows ...
print STDERR 'Configuration file is not valid. There are '
. "sections closed before opened.\n";
exit(1);
}
else {
unless ($content =~ s!\A((?:(?:^\s*(?:[^<]|<[^/]).*(?:$)\n)*
^\s*</.*(?:$)\n?){$cntopen})
!$1$c$amd\n!mx) {
# cannot happen here, anyway.
print STDERR 'Configuration file is not valid. There '
. "are sections opened and not closed.\n";
exit(1);
}
}
} else {
# replace already existing AddModule line
$content =~ s|^(.*\n)#?\s*$amd[^\n]*\n|$1$c$amd\n|s;
}
}
if (@lmd or @amd) {
if (open(FP, ">$cfgbase.conf.new")) {
print FP $content;
close(FP);
if ($^O ne "MSWin32") {
push(@cmds, "cp $cfgbase.conf.new $cfgbase.conf");
push(@cmds, "rm $cfgbase.conf.new");
} else {
$cfgbase =~ s|/|\\|g;
push(@cmds, "copy \"$cfgbase.conf.new\" \"$cfgbase.conf\"");
push(@cmds, "del \"$cfgbase.conf.new\"");
}
} else {
print STDERR "apxs:Error: unable to open configuration file\n";
}
}
}
# execute the commands
&execute_cmds(@cmds);
}
##EOF##
__DATA__
##
## Makefile -- Build procedure for sample %NAME% Apache module
## Autogenerated via ``apxs -n %NAME% -g''.
##
# the used tools
APXS=apxs
APACHECTL=apachectl
# additional user defines, includes and libraries
#DEF=-Dmy_define=my_value
#INC=-Imy/include/dir
#LIB=-Lmy/lib/dir -lmylib
# the default target
all: mod_%NAME%.%DSO_EXT%
# compile the DSO file
mod_%NAME%.%DSO_EXT%: mod_%NAME%.c
$(APXS) -c $(DEF) $(INC) $(LIB) mod_%NAME%.c
# install the DSO file into the Apache installation
# and activate it in the Apache configuration
install: all
$(APXS) -i -a -n '%NAME%' mod_%NAME%.%DSO_EXT%
# cleanup
clean:
-rm -f mod_%NAME%.o mod_%NAME%.%DSO_EXT%
# simple test
test: reload
lynx -mime_header http://localhost/%NAME%
# reload the module by installing and restarting Apache
reload: install restart
# the general Apache start/restart/stop procedures
start:
$(APACHECTL) start
restart:
$(APACHECTL) restart
stop:
$(APACHECTL) stop
-=#=-
/*
** mod_%NAME%.c -- Apache sample %NAME% module
** [Autogenerated via ``apxs -n %NAME% -g'']
**
** To play with this sample module, first compile it into a
** DSO file and install it into Apache's libexec directory
** by running:
**
** $ apxs -c -i mod_%NAME%.c
**
** Then activate it in Apache's %TARGET%.conf file, for instance
** for the URL /%NAME%, as follows:
**
** # %TARGET%.conf
** LoadModule %NAME%_module libexec/mod_%NAME%.%DSO_EXT%
** <Location /%NAME%>
** SetHandler %NAME%
** </Location>
**
** Then after restarting Apache via
**
** $ apachectl restart
**
** you immediately can request the URL /%NAME and watch for the
** output of this module. This can be achieved for instance via:
**
** $ lynx -mime_header http://localhost/%NAME%
**
** The output should be similar to the following one:
**
** HTTP/1.1 200 OK
** Date: Tue, 31 Mar 1998 14:42:22 GMT
** Server: Apache/1.3.4 (Unix)
** Connection: close
** Content-Type: text/html
**
** The sample page from mod_%NAME%.c
*/
#include "httpd.h"
#include "http_config.h"
#include "http_protocol.h"
#include "ap_config.h"
/* The sample content handler */
static int %NAME%_handler(request_rec *r)
{
r->content_type = "text/html";
ap_send_http_header(r);
if (!r->header_only)
ap_rputs("The sample page from mod_%NAME%.c\n", r);
return OK;
}
/* Dispatch list of content handlers */
static const handler_rec %NAME%_handlers[] = {
{ "%NAME%", %NAME%_handler },
{ NULL, NULL }
};
/* Dispatch list for API hooks */
module MODULE_VAR_EXPORT %NAME%_module = {
STANDARD_MODULE_STUFF,
NULL, /* module initializer */
NULL, /* create per-dir config structures */
NULL, /* merge per-dir config structures */
NULL, /* create per-server config structures */
NULL, /* merge per-server config structures */
NULL, /* table of config file commands */
%NAME%_handlers, /* [#8] MIME-typed-dispatched handlers */
NULL, /* [#1] URI to filename translation */
NULL, /* [#4] validate user id from request */
NULL, /* [#5] check if the user is ok _here_ */
NULL, /* [#3] check access by host address */
NULL, /* [#6] determine MIME type */
NULL, /* [#7] pre-run fixups */
NULL, /* [#9] log a transaction */
NULL, /* [#2] header parser */
NULL, /* child_init */
NULL, /* child_exit */
NULL /* [#0] post read-request */
#ifdef EAPI
,NULL, /* EAPI: add_module */
NULL, /* EAPI: remove_module */
NULL, /* EAPI: rewrite_command */
NULL /* EAPI: new_connection */
#endif
};