| Current Path : /compat/linux/proc/68247/cwd/usr/share/snmp/mibs/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/cwd/usr/share/snmp/mibs/BEGEMOT-SNMPD.txt |
--
-- Copyright (c) 2001-2003
-- Fraunhofer Institute for Open Communication Systems (FhG Fokus).
-- All rights reserved.
--
-- Author: Harti Brandt <harti@freebsd.org>
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $Begemot: bsnmp/snmpd/BEGEMOT-SNMPD.txt,v 1.23 2004/08/06 08:47:08 brandt Exp $
--
-- Begemot Private SNMPd MIB.
--
BEGEMOT-SNMPD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Counter32,
Unsigned32, IpAddress
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
begemot
FROM BEGEMOT-MIB;
begemotSnmpd MODULE-IDENTITY
LAST-UPDATED "200212040000Z"
ORGANIZATION "Fraunhofer FOKUS, CATS"
CONTACT-INFO
" Hartmut Brandt
Postal: Fraunhofer Institute for Open Communication Systems
Kaiserin-Augusta-Allee 31
10589 Berlin
Germany
Fax: +49 30 3463 7352
E-mail: harti@freebsd.org"
DESCRIPTION
"The MIB module for the Begemot SNMP daemon."
::= { begemot 1 }
begemotSnmpdObjects OBJECT IDENTIFIER ::= { begemotSnmpd 1 }
begemotSnmpdDefs OBJECT IDENTIFIER ::= { begemotSnmpd 2 }
-- --------------------------------------------------------------------------
SectionName ::= TEXTUAL-CONVENTION
DISPLAY-HINT "14a"
STATUS current
DESCRIPTION
"Name of a loadable module. Should consist of alphanumeric characers
only, the first character must be a letter."
SYNTAX OCTET STRING (SIZE(1..14))
-- --------------------------------------------------------------------------
--
-- Agent types
--
begemotSnmpdAgent OBJECT IDENTIFIER ::= { begemotSnmpdDefs 1 }
begemotSnmpdAgentFreeBSD OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Identifies the agent as running on FreeBSD."
::= { begemotSnmpdAgent 1 }
-- --------------------------------------------------------------------------
--
-- The Config Group
--
begemotSnmpdConfig OBJECT IDENTIFIER ::= { begemotSnmpdObjects 1 }
begemotSnmpdTransmitBuffer OBJECT-TYPE
SYNTAX INTEGER (484..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the receive buffer in bytes. Larger messages
are dropped by SNMPd."
DEFVAL { 2048 }
::= { begemotSnmpdConfig 1 }
begemotSnmpdReceiveBuffer OBJECT-TYPE
SYNTAX INTEGER (484..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The size of the transmit buffer in bytes. Larger messages
cannot be sent by the SNMPd."
DEFVAL { 2048 }
::= { begemotSnmpdConfig 2 }
begemotSnmpdCommunityDisable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disables all access to the CommunityTable from SNMP. Once
set it cannot be cleared."
DEFVAL { false }
::= { begemotSnmpdConfig 3 }
begemotSnmpdTrap1Addr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The trap sink for v1 traps."
::= { begemotSnmpdConfig 4 }
begemotSnmpdVersionEnable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNMP versions that the agent processes. The following
bits are defined:
0x00000001 - SNMPv1
0x00000002 - SNMPv2c
0x00000004 - SNMPv3"
DEFVAL { 3 }
::= { begemotSnmpdConfig 5 }
--
-- Trap destinations
--
begemotTrapSinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotTrapSinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with destinations for standard traps."
INDEX { begemotTrapSinkAddr, begemotTrapSinkPort }
::= { begemotSnmpdObjects 2 }
begemotTrapSinkEntry OBJECT-TYPE
SYNTAX BegemotTrapSinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry describes one trap destination."
INDEX { begemotTrapSinkAddr, begemotTrapSinkPort }
::= { begemotTrapSinkTable 1 }
BegemotTrapSinkEntry ::= SEQUENCE {
begemotTrapSinkAddr IpAddress,
begemotTrapSinkPort INTEGER,
begemotTrapSinkStatus RowStatus
}
begemotTrapSinkAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination IP address of the manager station where to send
traps."
::= { begemotTrapSinkEntry 1 }
begemotTrapSinkPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Destination UDP port of the manager station where to send
traps."
::= { begemotTrapSinkEntry 2 }
begemotTrapSinkStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create/activate/destroy the entry."
::= { begemotTrapSinkEntry 3 }
--
-- SNMP port table
--
begemotSnmpdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotSnmpdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with descriptions of UDP ports to listen on
for SNMP messages."
::= { begemotSnmpdObjects 4 }
begemotSnmpdPortEntry OBJECT-TYPE
SYNTAX BegemotSnmpdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table with descriptions of UDP ports to
listen on for SNMP messages."
INDEX { begemotSnmpdPortAddress, begemotSnmpdPortPort }
::= { begemotSnmpdPortTable 1 }
BegemotSnmpdPortEntry ::= SEQUENCE {
begemotSnmpdPortAddress IpAddress,
begemotSnmpdPortPort INTEGER,
begemotSnmpdPortStatus INTEGER
}
begemotSnmpdPortAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address to bind to."
::= { begemotSnmpdPortEntry 1 }
begemotSnmpdPortPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UDP port to listen on for SNMP messages."
::= { begemotSnmpdPortEntry 2 }
begemotSnmpdPortStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), invalid(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set status to 1 to create entry, set it to 2 to delete it."
::= { begemotSnmpdPortEntry 3 }
---
--- Community table
---
begemotSnmpdCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotSnmpdCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with the community strings for access control."
::= { begemotSnmpdObjects 5 }
begemotSnmpdCommunityEntry OBJECT-TYPE
SYNTAX BegemotSnmpdCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with the community strings for access control.
When begemotSnmpdCommDisable is true, this table disappears."
INDEX { begemotSnmpdCommunityModule, begemotSnmpdCommunityIndex }
::= { begemotSnmpdCommunityTable 1 }
BegemotSnmpdCommunityEntry ::= SEQUENCE {
begemotSnmpdCommunityModule SectionName,
begemotSnmpdCommunityIndex Unsigned32,
begemotSnmpdCommunityString OCTET STRING,
begemotSnmpdCommunityDescr OCTET STRING
}
begemotSnmpdCommunityModule OBJECT-TYPE
SYNTAX SectionName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of the module that has registered this community.
For global communities this is the empty string."
::= { begemotSnmpdCommunityEntry 1 }
begemotSnmpdCommunityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The numerical index of the community (private to the module)."
::= { begemotSnmpdCommunityEntry 2 }
begemotSnmpdCommunityString OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The string for access to SNMPd."
::= { begemotSnmpdCommunityEntry 3 }
begemotSnmpdCommunityDescr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description what this community is good for."
::= { begemotSnmpdCommunityEntry 4 }
--
-- Module table
--
begemotSnmpdModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotSnmpdModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table describing all the currently loaded dynamic modules.
Writing to this table loads and unloads modules."
::= { begemotSnmpdObjects 6 }
begemotSnmpdModuleEntry OBJECT-TYPE
SYNTAX BegemotSnmpdModuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table entry describing a loadable module."
INDEX { begemotSnmpdModuleSection }
::= { begemotSnmpdModuleTable 1 }
BegemotSnmpdModuleEntry ::= SEQUENCE {
begemotSnmpdModuleSection SectionName,
begemotSnmpdModulePath OCTET STRING,
begemotSnmpdModuleComment OCTET STRING
}
begemotSnmpdModuleSection OBJECT-TYPE
SYNTAX SectionName
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The string used for matching configuration file sections
and indexes the module table."
::= { begemotSnmpdModuleEntry 1 }
begemotSnmpdModulePath OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The path name of the module. Set to empty string
to unload a module. The path of an existing module
may not be changed."
::= { begemotSnmpdModuleEntry 2 }
begemotSnmpdModuleComment OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A comment describing this module."
::= { begemotSnmpdModuleEntry 3 }
-- --------------------------------------------------------------------------
--
-- The STATISTICS Group
--
begemotSnmpdStats OBJECT IDENTIFIER ::= { begemotSnmpdObjects 7 }
begemotSnmpdStatsNoRxBufs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a receive buffer could not be allocated
for a packet."
::= { begemotSnmpdStats 1 }
begemotSnmpdStatsNoTxBufs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times a transmit buffer could not be allocated
for a packet."
::= { begemotSnmpdStats 2 }
begemotSnmpdStatsInTooLongPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received that were longer than the
receive buffer. These packets are dropped."
::= { begemotSnmpdStats 3 }
begemotSnmpdStatsInBadPduTypes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received with a bad type field."
::= { begemotSnmpdStats 4 }
--
-- The Debug Group
--
begemotSnmpdDebug OBJECT IDENTIFIER ::= { begemotSnmpdObjects 8 }
begemotSnmpdDebugDumpPdus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dump PDUs to log file if true."
DEFVAL { false }
::= { begemotSnmpdDebug 1 }
begemotSnmpdDebugSnmpTrace OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tracing flags for the SNMP library. These flags have the
following meaning:
0x00000001 trace GET operator
0x00000002 trace GETNEXT operator
0x00000004 trace SET operator
0x00000008 trace dependency processing
0x00000010 trace node finding
0x10000000 log ASN1 errors
0x20000000 log SNMP errors
Individual values can be or-ed together."
DEFVAL { 0 }
::= { begemotSnmpdDebug 2 }
begemotSnmpdDebugSyslogPri OBJECT-TYPE
SYNTAX INTEGER (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Events with this or higher priority should not be logged."
DEFVAL { 7 } -- don't log debug messages
::= { begemotSnmpdDebug 3 }
--
-- Local port table
--
begemotSnmpdLocalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotSnmpdLocalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table with descriptions of local (unix domain) ports to listen
on for SNMP messages."
::= { begemotSnmpdObjects 9 }
begemotSnmpdLocalPortEntry OBJECT-TYPE
SYNTAX BegemotSnmpdLocalPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table with descriptions of local ports to
listen on for SNMP messages."
INDEX { begemotSnmpdLocalPortPath }
::= { begemotSnmpdLocalPortTable 1 }
BegemotSnmpdLocalPortEntry ::= SEQUENCE {
begemotSnmpdLocalPortPath OCTET STRING,
begemotSnmpdLocalPortStatus INTEGER,
begemotSnmpdLocalPortType INTEGER
}
begemotSnmpdLocalPortPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..104))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The path name to create and listen on."
::= { begemotSnmpdLocalPortEntry 1 }
begemotSnmpdLocalPortStatus OBJECT-TYPE
SYNTAX INTEGER { valid(1), invalid(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Set status to 1 to create entry, set it to 2 to delete it."
::= { begemotSnmpdLocalPortEntry 2 }
begemotSnmpdLocalPortType OBJECT-TYPE
SYNTAX INTEGER {
dgram-unpriv(1),
dgram-priv(2),
stream-unpriv(3),
stream-priv(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of the port. If the type is unpriv SET operations
are allowed from all clients if the community matches. For
priv SET operations are allowed only from peers with uid
zero. If the daemon cannot determine the peer uid it disallows
the SET operation for -priv ports."
::= { begemotSnmpdLocalPortEntry 3 }
--
-- Transport mapping table
--
begemotSnmpdTransportMappings OBJECT IDENTIFIER ::= { begemotSnmpdObjects 10 }
begemotSnmpdTransportTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotSnmpdTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all the currently loaded transport mappings."
::= { begemotSnmpdTransportMappings 1 }
begemotSnmpdTransportEntry OBJECT-TYPE
SYNTAX BegemotSnmpdTransportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table with the transport mappings."
INDEX { begemotSnmpdTransportName }
::= { begemotSnmpdTransportTable 1 }
BegemotSnmpdTransportEntry ::= SEQUENCE {
begemotSnmpdTransportName OCTET STRING,
begemotSnmpdTransportStatus INTEGER,
begemotSnmpdTransportOid OBJECT IDENTIFIER
}
begemotSnmpdTransportName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..256))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the mapping."
::= { begemotSnmpdTransportEntry 1 }
begemotSnmpdTransportStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used to create/activate/destroy the entry."
::= { begemotSnmpdTransportEntry 2 }
begemotSnmpdTransportOid OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A pointer to the group with the transport-dependend stuff."
::= { begemotSnmpdTransportEntry 3 }
--
-- XXX These should go into their own MIB
--
begemotSnmpdTransUdp OBJECT IDENTIFIER ::= { begemotSnmpdTransportMappings 2 }
begemotSnmpdTransLsock OBJECT IDENTIFIER ::= { begemotSnmpdTransportMappings 3 }
END