Current Path : /compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/arm/at91/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/arm/at91/at91_st.c |
/*- * Copyright (c) 2005 Olivier Houchard. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/arm/at91/at91_st.c 217036 2011-01-05 23:45:07Z imp $"); #include <sys/param.h> #include <sys/systm.h> #include <sys/kernel.h> #include <sys/module.h> #include <sys/time.h> #include <sys/bus.h> #include <sys/resource.h> #include <sys/rman.h> #include <sys/timetc.h> #include <sys/watchdog.h> #include <machine/bus.h> #include <machine/cpu.h> #include <machine/cpufunc.h> #include <machine/resource.h> #include <machine/frame.h> #include <machine/intr.h> #include <arm/at91/at91rm92reg.h> #include <arm/at91/at91var.h> #include <arm/at91/at91_streg.h> static struct at91st_softc { bus_space_tag_t sc_st; bus_space_handle_t sc_sh; device_t sc_dev; eventhandler_tag sc_wet; /* watchdog event handler tag */ } *timer_softc; #define RD4(off) \ bus_space_read_4(timer_softc->sc_st, timer_softc->sc_sh, (off)) #define WR4(off, val) \ bus_space_write_4(timer_softc->sc_st, timer_softc->sc_sh, (off), (val)) static void at91st_watchdog(void *, u_int, int *); static inline int st_crtr(void) { int cur1, cur2; do { cur1 = RD4(ST_CRTR); cur2 = RD4(ST_CRTR); } while (cur1 != cur2); return (cur1); } static unsigned at91st_get_timecount(struct timecounter *tc); static struct timecounter at91st_timecounter = { at91st_get_timecount, /* get_timecount */ NULL, /* no poll_pps */ 0xfffffu, /* counter_mask */ 32768, /* frequency */ "AT91RM9200 timer", /* name */ 1000 /* quality */ }; static int at91st_probe(device_t dev) { device_set_desc(dev, "ST"); return (0); } static int at91st_attach(device_t dev) { struct at91_softc *sc = device_get_softc(device_get_parent(dev)); timer_softc = device_get_softc(dev); timer_softc->sc_st = sc->sc_st; timer_softc->sc_dev = dev; if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91RM92_ST_BASE, AT91RM92_ST_SIZE, &timer_softc->sc_sh) != 0) panic("couldn't subregion timer registers"); /* * Real time counter increments every clock cycle, need to set before * initializing clocks so that DELAY works. */ WR4(ST_RTMR, 1); /* Disable all interrupts */ WR4(ST_IDR, 0xffffffff); /* disable watchdog timer */ WR4(ST_WDMR, 0); timer_softc->sc_wet = EVENTHANDLER_REGISTER(watchdog_list, at91st_watchdog, dev, 0); device_printf(dev, "watchdog registered, timeout intervall max. 64 sec\n"); return (0); } static device_method_t at91st_methods[] = { DEVMETHOD(device_probe, at91st_probe), DEVMETHOD(device_attach, at91st_attach), {0, 0}, }; static driver_t at91st_driver = { "at91_st", at91st_methods, sizeof(struct at91st_softc), }; static devclass_t at91st_devclass; DRIVER_MODULE(at91_st, atmelarm, at91st_driver, at91st_devclass, 0, 0); static unsigned at91st_get_timecount(struct timecounter *tc) { return (st_crtr()); } /* * t below is in a weird unit. The watchdog is set to 2^t * nanoseconds. Since our watchdog timer can't really do that too * well, we approximate it by assuming that the timeout interval for * the lsb is 2^22 ns, which is 4.194ms. This is an overestimation of * the actual time (3.906ms), but close enough for watchdogging. * These approximations, though a violation of the spec, improve the * performance of the application which typically specifies things as * WD_TO_32SEC. In that last case, we'd wait 32s before the wdog * reset. The spec says we should wait closer to 34s, but given how * it is likely to be used, and the extremely coarse nature time * interval, I think this is the best solution. */ static void at91st_watchdog(void *argp, u_int cmd, int *error) { uint32_t wdog; int t; t = cmd & WD_INTERVAL; if (t >= 22 && t <= 37) { wdog = (1 << (t - 22)) | ST_WDMR_RSTEN; *error = 0; } else { wdog = 0; } WR4(ST_WDMR, wdog); WR4(ST_CR, ST_CR_WDRST); } static int clock_intr(void *arg) { struct trapframe *fp = arg; /* The interrupt is shared, so we have to make sure it's for us. */ if (RD4(ST_SR) & ST_SR_PITS) { hardclock(TRAPF_USERMODE(fp), TRAPF_PC(fp)); return (FILTER_HANDLED); } return (FILTER_STRAY); } void cpu_initclocks(void) { int rel_value; struct resource *irq; int rid = 0; void *ih; device_t dev = timer_softc->sc_dev; rel_value = 32768 / hz; if (rel_value < 1) rel_value = 1; if (32768 % hz) { printf("Cannot get %d Hz clock; using %dHz\n", hz, 32768 / rel_value); hz = 32768 / rel_value; tick = 1000000 / hz; } /* Disable all interrupts. */ WR4(ST_IDR, 0xffffffff); /* The system timer shares the system irq (1) */ irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 1, 1, 1, RF_ACTIVE | RF_SHAREABLE); if (!irq) panic("Unable to allocate irq for the system timer"); else bus_setup_intr(dev, irq, INTR_TYPE_CLK, clock_intr, NULL, NULL, &ih); WR4(ST_PIMR, rel_value); /* Enable PITS interrupts. */ WR4(ST_IER, ST_SR_PITS); tc_init(&at91st_timecounter); } void DELAY(int n) { uint32_t start, end, cur; start = st_crtr(); n = (n * 1000) / 32768; if (n <= 0) n = 1; end = (start + n) & ST_CRTR_MASK; cur = start; if (start > end) { while (cur >= start || cur < end) cur = st_crtr(); } else { while (cur < end) cur = st_crtr(); } } void cpu_reset(void) { /* * Reset the CPU by programmig the watchdog timer to reset the * CPU after 128 'slow' clocks, or about ~4ms. Loop until * the reset happens for safety. */ WR4(ST_WDMR, ST_WDMR_RSTEN | 2); WR4(ST_CR, ST_CR_WDRST); while (1) continue; } void cpu_startprofclock(void) { } void cpu_stopprofclock(void) { }