| Current Path : /compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/arm/s3c2xx0/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/arm/s3c2xx0/s3c2440reg.h |
/*- * Copyright (C) 2009 Andrew Turner * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/arm/s3c2xx0/s3c2440reg.h 205354 2010-03-20 03:39:35Z imp $ */ /* * Samsung S3C2440X processor is ARM920T based integrated CPU * * Reference: * S3C2440A/S3C2442B User's Manual */ #ifndef _ARM_S3C2XX0_S3C2440REG_H_ #define _ARM_S3C2XX0_S3C2440REG_H_ /* common definitions for S3C2410 and S3C2440 */ #include <arm/s3c2xx0/s3c24x0reg.h> /* * Memory Map */ #define S3C2440_BANK_SIZE 0x08000000 #define S3C2440_BANK_START(n) (S3C2410_BANK_SIZE*(n)) #define S3C2440_SDRAM_START S3C2410_BANK_START(6) /* interrupt control */ #define S3C2440_SUBIRQ_MAX (S3C24X0_SUBIRQ_MIN+10) /* Clock control */ /* CLKMAN_CLKCON */ #define S3C2440_CLKCON_STOP (1<<0) /* 1=transition to STOP mode */ /* CLKMAN_CLKDIVN */ #define S3C2440_CLKDIVN_HDIVN (3<<1) /* hclk */ #define S3C2440_CLKMAN_CAMDIVN 0x18 #define S3C2440_CAMDIVN_HCLK4_HALF (1<<9) #define S3C2440_CAMDIVN_HCLK3_HALF (1<<8) /* NAND Flash controller */ #define S3C2440_NANDFC_SIZE 0x40 #define S3C2440_NANDFC_NFCONT 0x04 #define S3C2440_NFCONT_LOCK_TIGHT (1<<13) /* Lock part of the NAND */ #define S3C2440_NFCONT_SOFT_LOCK (1<<12) /* Soft lock part of the NAND */ #define S3C2440_NFCONT_ILLEGAL_ACC_INT (1<<10) /* Illegal access interrupt */ #define S3C2440_NFCONT_RNB_INT (1<<9) /* RnB transition interrupt */ #define S3C2440_NFCONT_RNB_TRANS_MODE (1<<8) /* RnB transition mode */ #define S3C2440_NFCONT_SPARE_ECC_LOCK (1<<6) /* Lock spare ECC generation */ #define S3C2440_NFCONT_MAIN_ECC_LOCK (1<<5) /* Lock main ECC generation */ #define S3C2440_NFCONT_INIT_ECC (1<<4) /* Init ECC encoder/decoder */ #define S3C2440_NFCONT_NCE (1<<1) /* NAND Chip select */ #define S3C2440_NFCONT_ENABLE (1<<0) /* Enable the controller */ #define S3C2440_NANDFC_NFCMMD 0x08 #define S3C2440_NANDFC_NFADDR 0x0c #define S3C2440_NANDFC_NFDATA 0x10 #define S3C2440_NANDFC_NFSTAT 0x20 /* MMC/SD */ /* SDI_CON */ #define S3C2440_CON_RESET (1<<8) #define S3C2440_CON_CLOCK_TYPE (1<<5) /* SDI_FSTA */ #define S3c2440_FSTA_RESET (1<<16) #define S3C2440_FSTA_FAIL_ERROR_MSK (3<<14) #define S3C2440_FSTA_FAIL_NONE (0<<14) #define S3C2440_FSTA_FAIL_FIFO (1<<14) #define S3C2440_FSTA_FAIL_LAST_TRANS (2<<14) /* GPIO */ #define S3C2440_GPIO_SIZE 0xd0 /* SD interface */ #define S3C2410_SDI_SIZE 0x44 #define DCON_START (1<<14) /* Start the data transfer */ #define S3C2440_SDI_IMSK 0x3c /* Interrupt mask */ #define S3C2440_SDI_IMASK_ALL 0x3C7C0 #define S3C2440_SDI_DAT 0x40 /* ADC */ #define ADCTSC_UD_SEN (1<<8) #define S3C2440_ADC_SIZE 0x18 /* UART */ #define S3C2440_UFSTAT_TXCOUNT (0x3f << 8) #define S3C2440_UFSTAT_RXCOUNT (0x3f << 0) #endif /* _ARM_S3C2XX0_S3C2440REG_H_ */