| Current Path : /compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/dev/isci/scil/sati_read_capacity.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/sati_read_capacity.c 233788 2012-04-02 16:35:42Z jimharris $");
/**
* @file
* @brief This file contains the method implementations required to
* translate the SCSI read capacity (10 byte) command.
*/
#if !defined(DISABLE_SATI_READ_CAPACITY)
#include <dev/isci/scil/sati_read_capacity.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/sati_util.h>
#include <dev/isci/scil/intel_ata.h>
#include <dev/isci/scil/intel_scsi.h>
/**
* @brief This method will translate the read capacity 10 SCSI command into
* an ATA IDENTIFY DEVICE command.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if the
* LBA field is not 0, the PMI bit is not 0.
*/
SATI_STATUS sati_read_capacity_10_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
/**
* SAT dictates:
* - the LBA field must be 0
* - the PMI bit must be 0
*/
if (
(
(sati_get_cdb_byte(cdb, 2) != 0)
|| (sati_get_cdb_byte(cdb, 3) != 0)
|| (sati_get_cdb_byte(cdb, 4) != 0)
|| (sati_get_cdb_byte(cdb, 5) != 0)
)
|| ((sati_get_cdb_byte(cdb, 8) & SCSI_READ_CAPACITY_PMI_BIT_ENABLE)
== 1)
)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
// The CDB is properly formed.
sequence->allocation_length = SCSI_READ_CAPACITY_10_DATA_LENGTH;
sequence->type = SATI_SEQUENCE_READ_CAPACITY_10;
sati_ata_identify_device_construct(ata_io, sequence);
return SATI_SUCCESS;
}
/**
* @brief This method will translate the read capacity 16 SCSI command into
* an ATA IDENTIFY DEVICE command.
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if the
* LBA field is not 0, the PMI bit is not 0.
*/
SATI_STATUS sati_read_capacity_16_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
/**
* SAT dictates:
* - the LBA field must be 0
* - the PMI bit must be 0
*/
if (
(
(sati_get_cdb_byte(cdb, 2) != 0)
|| (sati_get_cdb_byte(cdb, 3) != 0)
|| (sati_get_cdb_byte(cdb, 4) != 0)
|| (sati_get_cdb_byte(cdb, 5) != 0)
|| (sati_get_cdb_byte(cdb, 6) != 0)
|| (sati_get_cdb_byte(cdb, 7) != 0)
|| (sati_get_cdb_byte(cdb, 8) != 0)
|| (sati_get_cdb_byte(cdb, 9) != 0)
)
|| ((sati_get_cdb_byte(cdb, 14) & SCSI_READ_CAPACITY_PMI_BIT_ENABLE)
== 1)
)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
// The CDB is properly formed.
sequence->allocation_length = (sati_get_cdb_byte(cdb, 10) << 24) |
(sati_get_cdb_byte(cdb, 11) << 16) |
(sati_get_cdb_byte(cdb, 12) << 8) |
(sati_get_cdb_byte(cdb, 13));
sequence->type = SATI_SEQUENCE_READ_CAPACITY_16;
sati_ata_identify_device_construct(ata_io, sequence);
return SATI_SUCCESS;
}
/**
* @brief This method will translate the ATA Identify Device data into
* SCSI read capacity 10 data.
* For more information on the parameters passed to this method,
* please reference sati_translate_data().
*
* @return none
*/
void sati_read_capacity_10_translate_data(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * ata_input_data,
void * scsi_io
)
{
U32 lba_low = 0;
U32 lba_high = 0;
U32 sector_size = 0;
// Extract the sector information (sector size, logical blocks) from
// the retrieved ATA identify device data.
sati_ata_identify_device_get_sector_info(
(ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data,
&lba_high,
&lba_low,
§or_size
);
// SATA drives report a value that is one LBA larger than the last LBA.
// SCSI wants the last LBA. Make the correction here. lba_low is
// always decremented since it is an unsigned long the value 0 will
// wrap to 0xFFFFFFFF.
if ((lba_low == 0) && (lba_high == 0))
lba_high -= 1;
lba_low -= 1;
if(lba_high != 0)
{
sati_set_data_byte(sequence, scsi_io, 0, 0xFF);
sati_set_data_byte(sequence, scsi_io, 1, 0xFF);
sati_set_data_byte(sequence, scsi_io, 2, 0xFF);
sati_set_data_byte(sequence, scsi_io, 3, 0xFF);
}
else
{
// Build CDB for Read Capacity 10
// Fill in the Logical Block Address bytes.
sati_set_data_byte(sequence, scsi_io, 0, (U8)((lba_low >> 24) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 1, (U8)((lba_low >> 16) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 2, (U8)((lba_low >> 8) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 3, (U8)(lba_low & 0xFF));
}
// Fill in the sector size field.
sati_set_data_byte(sequence, scsi_io, 4, (U8)((sector_size >> 24) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 5, (U8)((sector_size >> 16) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 6, (U8)((sector_size >> 8) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 7, (U8)(sector_size & 0xFF));
}
/**
* @brief This method will translate the ATA Identify Device data into
* SCSI read capacity 16 data.
* For more information on the parameters passed to this method,
* please reference sati_translate_data().
*
* @return none
*/
void sati_read_capacity_16_translate_data(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * ata_input_data,
void * scsi_io
)
{
U32 lba_low = 0;
U32 lba_high = 0;
U32 sector_size = 0;
ATA_IDENTIFY_DEVICE_DATA_T * identify_device_data;
U16 physical_per_logical_enable_bit = 0;
U8 physical_per_logical_sector_exponent = 0;
U16 physical_per_logical_sector = 0;
U16 logical_sector_alignment = 0;
U16 scsi_logical_sector_alignment = 0;
U8 byte14 = 0;
//A number of data fields need to be extracted from ATA identify device data
identify_device_data = (ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data;
// Extract the sector information (sector size, logical blocks) from
// the retrieved ATA identify device data.
sati_ata_identify_device_get_sector_info(
(ATA_IDENTIFY_DEVICE_DATA_T*)ata_input_data,
&lba_high,
&lba_low,
§or_size
);
// SATA drives report a value that is one LBA larger than the last LBA.
// SCSI wants the last LBA. Make the correction here. lba_low is
// always decremented since it is an unsigned long the value 0 will
// wrap to 0xFFFFFFFF.
if ((lba_low == 0) && (lba_high == 0))
lba_high -= 1;
lba_low -= 1;
// Build the CDB for Read Capacity 16
// Fill in the Logical Block Address bytes.
sati_set_data_byte(sequence, scsi_io, 0, (U8)((lba_high >> 24) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 1, (U8)((lba_high >> 16) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 2, (U8)((lba_high >> 8) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 3, (U8)(lba_high & 0xFF));
sati_set_data_byte(sequence, scsi_io, 4, (U8)((lba_low >> 24) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 5, (U8)((lba_low >> 16) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 6, (U8)((lba_low >> 8) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 7, (U8)(lba_low & 0xFF));
//Fill in the sector size field.
sati_set_data_byte(sequence, scsi_io, 8, (U8)((sector_size >> 24) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 9, (U8)((sector_size >> 16) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 10, (U8)((sector_size >> 8) & 0xFF));
sati_set_data_byte(sequence, scsi_io, 11, (U8)(sector_size & 0xFF));
//Explicitly set byte 12 to 0. SATI requires that all bytes in the data
//response be explicitly set to some value.
sati_set_data_byte(sequence, scsi_io, 12, 0);
//Check Bit 13 of ATA_IDENTIFY_DEVICE_DATA physical_logical_sector_info
//(Word 106) is enabled
physical_per_logical_enable_bit = (identify_device_data->physical_logical_sector_info
& ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_ENABLE);
//Extract the Physical per logical sector exponent field and calculate
//Physical per logical sector value
physical_per_logical_sector_exponent = (U8) (identify_device_data->physical_logical_sector_info
& ATA_IDENTIFY_LOGICAL_SECTOR_PER_PHYSICAL_SECTOR_MASK);
physical_per_logical_sector = 1 << (physical_per_logical_sector_exponent);
//If the data is valid, fill in the logical blocks per physical block exponent field.
//Else set logical blocks per physical block exponent to 1
if (physical_per_logical_enable_bit != 0)
sati_set_data_byte(
sequence,
scsi_io,
13,
(U8)(physical_per_logical_sector_exponent & 0xFF)
);
else
sati_set_data_byte(sequence, scsi_io, 13, 0);
//Fill in the lowest aligned logical block address field.
logical_sector_alignment = identify_device_data->logical_sector_alignment;
if (logical_sector_alignment == 0)
scsi_logical_sector_alignment = 0;
else
scsi_logical_sector_alignment = (physical_per_logical_sector - logical_sector_alignment)
% physical_per_logical_sector;
//Follow SAT for reporting tprz and tpe
if ((sequence->device->capabilities & SATI_DEVICE_CAP_DSM_TRIM_SUPPORT) &&
(sequence->device->capabilities & SATI_DEVICE_CAP_DETERMINISTIC_READ_AFTER_TRIM))
{
// tpe
byte14 |= 0x80;
// tprz
if (sequence->device->capabilities & SATI_DEVICE_CAP_READ_ZERO_AFTER_TRIM)
byte14 |= 0x40;
}
sati_set_data_byte(
sequence,
scsi_io,
14,
(U8)(((scsi_logical_sector_alignment >>8) & 0x3F) | byte14));
sati_set_data_byte(
sequence,
scsi_io,
15,
(U8)(scsi_logical_sector_alignment & 0xFF));
}
#endif // !defined(DISABLE_SATI_READ_CAPACITY)