Current Path : /compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/net80211/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //compat/linux/proc/68247/root/compat/linux/proc/68247/root/sys/net80211/ieee80211_input.c |
/*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/net80211/ieee80211_input.c 220445 2011-04-08 09:20:45Z adrian $"); #include "opt_wlan.h" #include <sys/param.h> #include <sys/systm.h> #include <sys/mbuf.h> #include <sys/malloc.h> #include <sys/endian.h> #include <sys/kernel.h> #include <sys/socket.h> #include <net/ethernet.h> #include <net/if.h> #include <net/if_llc.h> #include <net/if_media.h> #include <net/if_vlan_var.h> #include <net80211/ieee80211_var.h> #include <net80211/ieee80211_input.h> #ifdef IEEE80211_SUPPORT_MESH #include <net80211/ieee80211_mesh.h> #endif #include <net/bpf.h> #ifdef INET #include <netinet/in.h> #include <net/ethernet.h> #endif static void ieee80211_process_mimo(struct ieee80211_node *ni, struct ieee80211_rx_stats *rx) { int i; /* Verify the required MIMO bits are set */ if ((rx->r_flags & (IEEE80211_R_C_CHAIN | IEEE80211_R_C_NF | IEEE80211_R_C_RSSI)) != (IEEE80211_R_C_CHAIN | IEEE80211_R_C_NF | IEEE80211_R_C_RSSI)) return; /* XXX This assumes the MIMO radios have both ctl and ext chains */ for (i = 0; i < MIN(rx->c_chain, IEEE80211_MAX_CHAINS); i++) { IEEE80211_RSSI_LPF(ni->ni_mimo_rssi_ctl[i], rx->c_rssi_ctl[i]); IEEE80211_RSSI_LPF(ni->ni_mimo_rssi_ext[i], rx->c_rssi_ext[i]); } /* XXX This also assumes the MIMO radios have both ctl and ext chains */ for(i = 0; i < MIN(rx->c_chain, IEEE80211_MAX_CHAINS); i++) { ni->ni_mimo_noise_ctl[i] = rx->c_nf_ctl[i]; ni->ni_mimo_noise_ext[i] = rx->c_nf_ext[i]; } ni->ni_mimo_chains = rx->c_chain; } int ieee80211_input_mimo(struct ieee80211_node *ni, struct mbuf *m, struct ieee80211_rx_stats *rx) { /* XXX should assert IEEE80211_R_NF and IEEE80211_R_RSSI are set */ ieee80211_process_mimo(ni, rx); return ieee80211_input(ni, m, rx->rssi, rx->nf); } int ieee80211_input_all(struct ieee80211com *ic, struct mbuf *m, int rssi, int nf) { struct ieee80211_rx_stats rx; rx.r_flags = IEEE80211_R_NF | IEEE80211_R_RSSI; rx.nf = nf; rx.rssi = rssi; return ieee80211_input_mimo_all(ic, m, &rx); } int ieee80211_input_mimo_all(struct ieee80211com *ic, struct mbuf *m, struct ieee80211_rx_stats *rx) { struct ieee80211vap *vap; int type = -1; m->m_flags |= M_BCAST; /* NB: mark for bpf tap'ing */ /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ieee80211_node *ni; struct mbuf *mcopy; /* NB: could check for IFF_UP but this is cheaper */ if (vap->iv_state == IEEE80211_S_INIT) continue; /* * WDS vap's only receive directed traffic from the * station at the ``far end''. That traffic should * be passed through the AP vap the station is associated * to--so don't spam them with mcast frames. */ if (vap->iv_opmode == IEEE80211_M_WDS) continue; if (TAILQ_NEXT(vap, iv_next) != NULL) { /* * Packet contents are changed by ieee80211_decap * so do a deep copy of the packet. */ mcopy = m_dup(m, M_DONTWAIT); if (mcopy == NULL) { /* XXX stat+msg */ continue; } } else { mcopy = m; m = NULL; } ni = ieee80211_ref_node(vap->iv_bss); type = ieee80211_input_mimo(ni, mcopy, rx); ieee80211_free_node(ni); } if (m != NULL) /* no vaps, reclaim mbuf */ m_freem(m); return type; } /* * This function reassembles fragments. * * XXX should handle 3 concurrent reassemblies per-spec. */ struct mbuf * ieee80211_defrag(struct ieee80211_node *ni, struct mbuf *m, int hdrspace) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); struct ieee80211_frame *lwh; uint16_t rxseq; uint8_t fragno; uint8_t more_frag = wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG; struct mbuf *mfrag; KASSERT(!IEEE80211_IS_MULTICAST(wh->i_addr1), ("multicast fragm?")); rxseq = le16toh(*(uint16_t *)wh->i_seq); fragno = rxseq & IEEE80211_SEQ_FRAG_MASK; /* Quick way out, if there's nothing to defragment */ if (!more_frag && fragno == 0 && ni->ni_rxfrag[0] == NULL) return m; /* * Remove frag to insure it doesn't get reaped by timer. */ if (ni->ni_table == NULL) { /* * Should never happen. If the node is orphaned (not in * the table) then input packets should not reach here. * Otherwise, a concurrent request that yanks the table * should be blocked by other interlocking and/or by first * shutting the driver down. Regardless, be defensive * here and just bail */ /* XXX need msg+stat */ m_freem(m); return NULL; } IEEE80211_NODE_LOCK(ni->ni_table); mfrag = ni->ni_rxfrag[0]; ni->ni_rxfrag[0] = NULL; IEEE80211_NODE_UNLOCK(ni->ni_table); /* * Validate new fragment is in order and * related to the previous ones. */ if (mfrag != NULL) { uint16_t last_rxseq; lwh = mtod(mfrag, struct ieee80211_frame *); last_rxseq = le16toh(*(uint16_t *)lwh->i_seq); /* NB: check seq # and frag together */ if (rxseq != last_rxseq+1 || !IEEE80211_ADDR_EQ(wh->i_addr1, lwh->i_addr1) || !IEEE80211_ADDR_EQ(wh->i_addr2, lwh->i_addr2)) { /* * Unrelated fragment or no space for it, * clear current fragments. */ m_freem(mfrag); mfrag = NULL; } } if (mfrag == NULL) { if (fragno != 0) { /* !first fragment, discard */ vap->iv_stats.is_rx_defrag++; IEEE80211_NODE_STAT(ni, rx_defrag); m_freem(m); return NULL; } mfrag = m; } else { /* concatenate */ m_adj(m, hdrspace); /* strip header */ m_cat(mfrag, m); /* NB: m_cat doesn't update the packet header */ mfrag->m_pkthdr.len += m->m_pkthdr.len; /* track last seqnum and fragno */ lwh = mtod(mfrag, struct ieee80211_frame *); *(uint16_t *) lwh->i_seq = *(uint16_t *) wh->i_seq; } if (more_frag) { /* more to come, save */ ni->ni_rxfragstamp = ticks; ni->ni_rxfrag[0] = mfrag; mfrag = NULL; } return mfrag; } void ieee80211_deliver_data(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { struct ether_header *eh = mtod(m, struct ether_header *); struct ifnet *ifp = vap->iv_ifp; /* clear driver/net80211 flags before passing up */ m->m_flags &= ~(M_80211_RX | M_MCAST | M_BCAST); /* NB: see hostap_deliver_data, this path doesn't handle hostap */ KASSERT(vap->iv_opmode != IEEE80211_M_HOSTAP, ("gack, hostap")); /* * Do accounting. */ ifp->if_ipackets++; IEEE80211_NODE_STAT(ni, rx_data); IEEE80211_NODE_STAT_ADD(ni, rx_bytes, m->m_pkthdr.len); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { m->m_flags |= M_MCAST; /* XXX M_BCAST? */ IEEE80211_NODE_STAT(ni, rx_mcast); } else IEEE80211_NODE_STAT(ni, rx_ucast); m->m_pkthdr.rcvif = ifp; if (ni->ni_vlan != 0) { /* attach vlan tag */ m->m_pkthdr.ether_vtag = ni->ni_vlan; m->m_flags |= M_VLANTAG; } ifp->if_input(ifp, m); } struct mbuf * ieee80211_decap(struct ieee80211vap *vap, struct mbuf *m, int hdrlen) { struct ieee80211_qosframe_addr4 wh; struct ether_header *eh; struct llc *llc; KASSERT(hdrlen <= sizeof(wh), ("hdrlen %d > max %zd", hdrlen, sizeof(wh))); if (m->m_len < hdrlen + sizeof(*llc) && (m = m_pullup(m, hdrlen + sizeof(*llc))) == NULL) { vap->iv_stats.is_rx_tooshort++; /* XXX msg */ return NULL; } memcpy(&wh, mtod(m, caddr_t), hdrlen); llc = (struct llc *)(mtod(m, caddr_t) + hdrlen); if (llc->llc_dsap == LLC_SNAP_LSAP && llc->llc_ssap == LLC_SNAP_LSAP && llc->llc_control == LLC_UI && llc->llc_snap.org_code[0] == 0 && llc->llc_snap.org_code[1] == 0 && llc->llc_snap.org_code[2] == 0 && /* NB: preserve AppleTalk frames that have a native SNAP hdr */ !(llc->llc_snap.ether_type == htons(ETHERTYPE_AARP) || llc->llc_snap.ether_type == htons(ETHERTYPE_IPX))) { m_adj(m, hdrlen + sizeof(struct llc) - sizeof(*eh)); llc = NULL; } else { m_adj(m, hdrlen - sizeof(*eh)); } eh = mtod(m, struct ether_header *); switch (wh.i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2); break; case IEEE80211_FC1_DIR_TODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr2); break; case IEEE80211_FC1_DIR_FROMDS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr1); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr3); break; case IEEE80211_FC1_DIR_DSTODS: IEEE80211_ADDR_COPY(eh->ether_dhost, wh.i_addr3); IEEE80211_ADDR_COPY(eh->ether_shost, wh.i_addr4); break; } #ifdef ALIGNED_POINTER if (!ALIGNED_POINTER(mtod(m, caddr_t) + sizeof(*eh), uint32_t)) { m = ieee80211_realign(vap, m, sizeof(*eh)); if (m == NULL) return NULL; } #endif /* ALIGNED_POINTER */ if (llc != NULL) { eh = mtod(m, struct ether_header *); eh->ether_type = htons(m->m_pkthdr.len - sizeof(*eh)); } return m; } /* * Decap a frame encapsulated in a fast-frame/A-MSDU. */ struct mbuf * ieee80211_decap1(struct mbuf *m, int *framelen) { #define FF_LLC_SIZE (sizeof(struct ether_header) + sizeof(struct llc)) struct ether_header *eh; struct llc *llc; /* * The frame has an 802.3 header followed by an 802.2 * LLC header. The encapsulated frame length is in the * first header type field; save that and overwrite it * with the true type field found in the second. Then * copy the 802.3 header up to where it belongs and * adjust the mbuf contents to remove the void. */ if (m->m_len < FF_LLC_SIZE && (m = m_pullup(m, FF_LLC_SIZE)) == NULL) return NULL; eh = mtod(m, struct ether_header *); /* 802.3 header is first */ llc = (struct llc *)&eh[1]; /* 802.2 header follows */ *framelen = ntohs(eh->ether_type) /* encap'd frame size */ + sizeof(struct ether_header) - sizeof(struct llc); eh->ether_type = llc->llc_un.type_snap.ether_type; ovbcopy(eh, mtod(m, uint8_t *) + sizeof(struct llc), sizeof(struct ether_header)); m_adj(m, sizeof(struct llc)); return m; #undef FF_LLC_SIZE } /* * Install received rate set information in the node's state block. */ int ieee80211_setup_rates(struct ieee80211_node *ni, const uint8_t *rates, const uint8_t *xrates, int flags) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_rateset *rs = &ni->ni_rates; memset(rs, 0, sizeof(*rs)); rs->rs_nrates = rates[1]; memcpy(rs->rs_rates, rates + 2, rs->rs_nrates); if (xrates != NULL) { uint8_t nxrates; /* * Tack on 11g extended supported rate element. */ nxrates = xrates[1]; if (rs->rs_nrates + nxrates > IEEE80211_RATE_MAXSIZE) { nxrates = IEEE80211_RATE_MAXSIZE - rs->rs_nrates; IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE, ni, "extended rate set too large; only using " "%u of %u rates", nxrates, xrates[1]); vap->iv_stats.is_rx_rstoobig++; } memcpy(rs->rs_rates + rs->rs_nrates, xrates+2, nxrates); rs->rs_nrates += nxrates; } return ieee80211_fix_rate(ni, rs, flags); } /* * Send a management frame error response to the specified * station. If ni is associated with the station then use * it; otherwise allocate a temporary node suitable for * transmitting the frame and then free the reference so * it will go away as soon as the frame has been transmitted. */ void ieee80211_send_error(struct ieee80211_node *ni, const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg) { struct ieee80211vap *vap = ni->ni_vap; int istmp; if (ni == vap->iv_bss) { if (vap->iv_state != IEEE80211_S_RUN) { /* * XXX hack until we get rid of this routine. * We can be called prior to the vap reaching * run state under certain conditions in which * case iv_bss->ni_chan will not be setup. * Check for this explicitly and and just ignore * the request. */ return; } ni = ieee80211_tmp_node(vap, mac); if (ni == NULL) { /* XXX msg */ return; } istmp = 1; } else istmp = 0; IEEE80211_SEND_MGMT(ni, subtype, arg); if (istmp) ieee80211_free_node(ni); } int ieee80211_alloc_challenge(struct ieee80211_node *ni) { if (ni->ni_challenge == NULL) ni->ni_challenge = (uint32_t *) malloc(IEEE80211_CHALLENGE_LEN, M_80211_NODE, M_NOWAIT); if (ni->ni_challenge == NULL) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni, "%s", "shared key challenge alloc failed"); /* XXX statistic */ } return (ni->ni_challenge != NULL); } /* * Parse a Beacon or ProbeResponse frame and return the * useful information in an ieee80211_scanparams structure. * Status is set to 0 if no problems were found; otherwise * a bitmask of IEEE80211_BPARSE_* items is returned that * describes the problems detected. */ int ieee80211_parse_beacon(struct ieee80211_node *ni, struct mbuf *m, struct ieee80211_scanparams *scan) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm; wh = mtod(m, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m, uint8_t *) + m->m_len; scan->status = 0; /* * beacon/probe response frame format * [8] time stamp * [2] beacon interval * [2] capability information * [tlv] ssid * [tlv] supported rates * [tlv] country information * [tlv] channel switch announcement (CSA) * [tlv] parameter set (FH/DS) * [tlv] erp information * [tlv] extended supported rates * [tlv] WME * [tlv] WPA or RSN * [tlv] HT capabilities * [tlv] HT information * [tlv] Atheros capabilities * [tlv] Mesh ID * [tlv] Mesh Configuration */ IEEE80211_VERIFY_LENGTH(efrm - frm, 12, return (scan->status = IEEE80211_BPARSE_BADIELEN)); memset(scan, 0, sizeof(*scan)); scan->tstamp = frm; frm += 8; scan->bintval = le16toh(*(uint16_t *)frm); frm += 2; scan->capinfo = le16toh(*(uint16_t *)frm); frm += 2; scan->bchan = ieee80211_chan2ieee(ic, ic->ic_curchan); scan->chan = scan->bchan; scan->ies = frm; scan->ies_len = efrm - frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return (scan->status = IEEE80211_BPARSE_BADIELEN)); switch (*frm) { case IEEE80211_ELEMID_SSID: scan->ssid = frm; break; case IEEE80211_ELEMID_RATES: scan->rates = frm; break; case IEEE80211_ELEMID_COUNTRY: scan->country = frm; break; case IEEE80211_ELEMID_CSA: scan->csa = frm; break; case IEEE80211_ELEMID_FHPARMS: if (ic->ic_phytype == IEEE80211_T_FH) { scan->fhdwell = LE_READ_2(&frm[2]); scan->chan = IEEE80211_FH_CHAN(frm[4], frm[5]); scan->fhindex = frm[6]; } break; case IEEE80211_ELEMID_DSPARMS: /* * XXX hack this since depending on phytype * is problematic for multi-mode devices. */ if (ic->ic_phytype != IEEE80211_T_FH) scan->chan = frm[2]; break; case IEEE80211_ELEMID_TIM: /* XXX ATIM? */ scan->tim = frm; scan->timoff = frm - mtod(m, uint8_t *); break; case IEEE80211_ELEMID_IBSSPARMS: case IEEE80211_ELEMID_CFPARMS: case IEEE80211_ELEMID_PWRCNSTR: /* NB: avoid debugging complaints */ break; case IEEE80211_ELEMID_XRATES: scan->xrates = frm; break; case IEEE80211_ELEMID_ERP: if (frm[1] != 1) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID, wh, "ERP", "bad len %u", frm[1]); vap->iv_stats.is_rx_elem_toobig++; break; } scan->erp = frm[2] | 0x100; break; case IEEE80211_ELEMID_HTCAP: scan->htcap = frm; break; case IEEE80211_ELEMID_RSN: scan->rsn = frm; break; case IEEE80211_ELEMID_HTINFO: scan->htinfo = frm; break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_ELEMID_MESHID: scan->meshid = frm; break; case IEEE80211_ELEMID_MESHCONF: scan->meshconf = frm; break; #endif case IEEE80211_ELEMID_VENDOR: if (iswpaoui(frm)) scan->wpa = frm; else if (iswmeparam(frm) || iswmeinfo(frm)) scan->wme = frm; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(frm)) scan->ath = frm; #endif #ifdef IEEE80211_SUPPORT_TDMA else if (istdmaoui(frm)) scan->tdma = frm; #endif else if (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) { /* * Accept pre-draft HT ie's if the * standard ones have not been seen. */ if (ishtcapoui(frm)) { if (scan->htcap == NULL) scan->htcap = frm; } else if (ishtinfooui(frm)) { if (scan->htinfo == NULL) scan->htcap = frm; } } break; default: IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID, wh, "unhandled", "id %u, len %u", *frm, frm[1]); vap->iv_stats.is_rx_elem_unknown++; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(scan->rates, IEEE80211_RATE_MAXSIZE, scan->status |= IEEE80211_BPARSE_RATES_INVALID); if (scan->rates != NULL && scan->xrates != NULL) { /* * NB: don't process XRATES if RATES is missing. This * avoids a potential null ptr deref and should be ok * as the return code will already note RATES is missing * (so callers shouldn't otherwise process the frame). */ IEEE80211_VERIFY_ELEMENT(scan->xrates, IEEE80211_RATE_MAXSIZE - scan->rates[1], scan->status |= IEEE80211_BPARSE_XRATES_INVALID); } IEEE80211_VERIFY_ELEMENT(scan->ssid, IEEE80211_NWID_LEN, scan->status |= IEEE80211_BPARSE_SSID_INVALID); if (scan->chan != scan->bchan && ic->ic_phytype != IEEE80211_T_FH) { /* * Frame was received on a channel different from the * one indicated in the DS params element id; * silently discard it. * * NB: this can happen due to signal leakage. * But we should take it for FH phy because * the rssi value should be correct even for * different hop pattern in FH. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, wh, NULL, "for off-channel %u", scan->chan); vap->iv_stats.is_rx_chanmismatch++; scan->status |= IEEE80211_BPARSE_OFFCHAN; } if (!(IEEE80211_BINTVAL_MIN <= scan->bintval && scan->bintval <= IEEE80211_BINTVAL_MAX)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_INPUT, wh, NULL, "bogus beacon interval", scan->bintval); vap->iv_stats.is_rx_badbintval++; scan->status |= IEEE80211_BPARSE_BINTVAL_INVALID; } if (scan->country != NULL) { /* * Validate we have at least enough data to extract * the country code. Not sure if we should return an * error instead of discarding the IE; consider this * being lenient as we don't depend on the data for * correct operation. */ IEEE80211_VERIFY_LENGTH(scan->country[1], 3 * sizeof(uint8_t), scan->country = NULL); } if (scan->csa != NULL) { /* * Validate Channel Switch Announcement; this must * be the correct length or we toss the frame. */ IEEE80211_VERIFY_LENGTH(scan->csa[1], 3 * sizeof(uint8_t), scan->status |= IEEE80211_BPARSE_CSA_INVALID); } /* * Process HT ie's. This is complicated by our * accepting both the standard ie's and the pre-draft * vendor OUI ie's that some vendors still use/require. */ if (scan->htcap != NULL) { IEEE80211_VERIFY_LENGTH(scan->htcap[1], scan->htcap[0] == IEEE80211_ELEMID_VENDOR ? 4 + sizeof(struct ieee80211_ie_htcap)-2 : sizeof(struct ieee80211_ie_htcap)-2, scan->htcap = NULL); } if (scan->htinfo != NULL) { IEEE80211_VERIFY_LENGTH(scan->htinfo[1], scan->htinfo[0] == IEEE80211_ELEMID_VENDOR ? 4 + sizeof(struct ieee80211_ie_htinfo)-2 : sizeof(struct ieee80211_ie_htinfo)-2, scan->htinfo = NULL); } return scan->status; } /* * Parse an Action frame. Return 0 on success, non-zero on failure. */ int ieee80211_parse_action(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_action *ia; struct ieee80211_frame *wh; uint8_t *frm, *efrm; /* * action frame format: * [1] category * [1] action * [tlv] parameters */ wh = mtod(m, struct ieee80211_frame *); frm = (u_int8_t *)&wh[1]; efrm = mtod(m, u_int8_t *) + m->m_len; IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action), return EINVAL); ia = (const struct ieee80211_action *) frm; vap->iv_stats.is_rx_action++; IEEE80211_NODE_STAT(ni, rx_action); /* verify frame payloads but defer processing */ switch (ia->ia_category) { case IEEE80211_ACTION_CAT_BA: switch (ia->ia_action) { case IEEE80211_ACTION_BA_ADDBA_REQUEST: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_addbarequest), return EINVAL); break; case IEEE80211_ACTION_BA_ADDBA_RESPONSE: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_addbaresponse), return EINVAL); break; case IEEE80211_ACTION_BA_DELBA: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ba_delba), return EINVAL); break; } break; case IEEE80211_ACTION_CAT_HT: switch (ia->ia_action) { case IEEE80211_ACTION_HT_TXCHWIDTH: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ht_txchwidth), return EINVAL); break; case IEEE80211_ACTION_HT_MIMOPWRSAVE: IEEE80211_VERIFY_LENGTH(efrm - frm, sizeof(struct ieee80211_action_ht_mimopowersave), return EINVAL); break; } break; } return 0; } #ifdef IEEE80211_DEBUG /* * Debugging support. */ void ieee80211_ssid_mismatch(struct ieee80211vap *vap, const char *tag, uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid) { printf("[%s] discard %s frame, ssid mismatch: ", ether_sprintf(mac), tag); ieee80211_print_essid(ssid + 2, ssid[1]); printf("\n"); } /* * Return the bssid of a frame. */ static const uint8_t * ieee80211_getbssid(const struct ieee80211vap *vap, const struct ieee80211_frame *wh) { if (vap->iv_opmode == IEEE80211_M_STA) return wh->i_addr2; if ((wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) != IEEE80211_FC1_DIR_NODS) return wh->i_addr1; if ((wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) == IEEE80211_FC0_SUBTYPE_PS_POLL) return wh->i_addr1; return wh->i_addr3; } #include <machine/stdarg.h> void ieee80211_note(const struct ieee80211vap *vap, const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "%s", buf); /* NB: no \n */ } void ieee80211_note_frame(const struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(ieee80211_getbssid(vap, wh)), buf); } void ieee80211_note_mac(const struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...) { char buf[128]; /* XXX */ va_list ap; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); if_printf(vap->iv_ifp, "[%s] %s\n", ether_sprintf(mac), buf); } void ieee80211_discard_frame(const struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(ieee80211_getbssid(vap, wh))); if (type == NULL) { printf("%s frame, ", ieee80211_mgt_subtype_name[ (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); } else printf("%s frame, ", type); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } void ieee80211_discard_ie(const struct ieee80211vap *vap, const struct ieee80211_frame *wh, const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(ieee80211_getbssid(vap, wh))); if (type != NULL) printf("%s information element, ", type); else printf("information element, "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } void ieee80211_discard_mac(const struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...) { va_list ap; if_printf(vap->iv_ifp, "[%s] discard ", ether_sprintf(mac)); if (type != NULL) printf("%s frame, ", type); else printf("frame, "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); } #endif /* IEEE80211_DEBUG */