| Current Path : /compat/linux/proc/68247/root/sys/mips/cavium/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/root/sys/mips/cavium/octopci.c |
/*-
* Copyright (c) 2010-2011 Juli Mallett <jmallett@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/mips/cavium/octopci.c 229093 2011-12-31 14:12:12Z hselasky $
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/mips/cavium/octopci.c 229093 2011-12-31 14:12:12Z hselasky $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/interrupt.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_extern.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/pmap.h>
#include <contrib/octeon-sdk/cvmx.h>
#include <contrib/octeon-sdk/cvmx-interrupt.h>
#include <contrib/octeon-sdk/cvmx-pcie.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
#include <mips/cavium/octopcireg.h>
#include <mips/cavium/octopcivar.h>
#include "pcib_if.h"
#define NPI_WRITE(addr, value) cvmx_write64_uint32((addr) ^ 4, (value))
#define NPI_READ(addr) cvmx_read64_uint32((addr) ^ 4)
struct octopci_softc {
device_t sc_dev;
unsigned sc_domain;
unsigned sc_bus;
bus_addr_t sc_io_base;
unsigned sc_io_next;
struct rman sc_io;
bus_addr_t sc_mem1_base;
unsigned sc_mem1_next;
struct rman sc_mem1;
};
static void octopci_identify(driver_t *, device_t);
static int octopci_probe(device_t);
static int octopci_attach(device_t);
static int octopci_read_ivar(device_t, device_t, int,
uintptr_t *);
static struct resource *octopci_alloc_resource(device_t, device_t, int, int *,
u_long, u_long, u_long, u_int);
static int octopci_activate_resource(device_t, device_t, int, int,
struct resource *);
static int octopci_maxslots(device_t);
static uint32_t octopci_read_config(device_t, u_int, u_int, u_int, u_int, int);
static void octopci_write_config(device_t, u_int, u_int, u_int, u_int,
uint32_t, int);
static int octopci_route_interrupt(device_t, device_t, int);
static unsigned octopci_init_bar(device_t, unsigned, unsigned, unsigned, unsigned, uint8_t *);
static unsigned octopci_init_device(device_t, unsigned, unsigned, unsigned, unsigned);
static unsigned octopci_init_bus(device_t, unsigned);
static void octopci_init_pci(device_t);
static uint64_t octopci_cs_addr(unsigned, unsigned, unsigned, unsigned);
static void
octopci_identify(driver_t *drv, device_t parent)
{
/* XXX Check sysinfo flag. */
BUS_ADD_CHILD(parent, 0, "pcib", 0);
if (octeon_has_feature(OCTEON_FEATURE_PCIE))
BUS_ADD_CHILD(parent, 0, "pcib", 1);
}
static int
octopci_probe(device_t dev)
{
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
device_set_desc(dev, "Cavium Octeon PCIe bridge");
return (0);
}
if (device_get_unit(dev) != 0)
return (ENXIO);
device_set_desc(dev, "Cavium Octeon PCI bridge");
return (0);
}
static int
octopci_attach(device_t dev)
{
struct octopci_softc *sc;
unsigned subbus;
int error;
sc = device_get_softc(dev);
sc->sc_dev = dev;
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
sc->sc_domain = device_get_unit(dev);
error = cvmx_pcie_rc_initialize(sc->sc_domain);
if (error != 0) {
device_printf(dev, "Failed to put PCIe bus in host mode.\n");
return (ENXIO);
}
/*
* In RC mode, the Simple Executive programs the first bus to
* be numbered as bus 1, because some IDT bridges used in
* Octeon systems object to being attached to bus 0.
*/
sc->sc_bus = 1;
sc->sc_io_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(sc->sc_domain));
sc->sc_io.rm_descr = "Cavium Octeon PCIe I/O Ports";
sc->sc_mem1_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_mem_base_address(sc->sc_domain));
sc->sc_mem1.rm_descr = "Cavium Octeon PCIe Memory";
} else {
octopci_init_pci(dev);
sc->sc_domain = 0;
sc->sc_bus = 0;
sc->sc_io_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_IO));
sc->sc_io.rm_descr = "Cavium Octeon PCI I/O Ports";
sc->sc_mem1_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1));
sc->sc_mem1.rm_descr = "Cavium Octeon PCI Memory";
}
sc->sc_io.rm_type = RMAN_ARRAY;
error = rman_init(&sc->sc_io);
if (error != 0)
return (error);
error = rman_manage_region(&sc->sc_io, CVMX_OCT_PCI_IO_BASE,
CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE);
if (error != 0)
return (error);
sc->sc_mem1.rm_type = RMAN_ARRAY;
error = rman_init(&sc->sc_mem1);
if (error != 0)
return (error);
error = rman_manage_region(&sc->sc_mem1, CVMX_OCT_PCI_MEM1_BASE,
CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE);
if (error != 0)
return (error);
/*
* Next offsets for resource allocation in octopci_init_bar.
*/
sc->sc_io_next = 0;
sc->sc_mem1_next = 0;
/*
* Configure devices.
*/
octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, 0xff, 1);
subbus = octopci_init_bus(dev, sc->sc_bus);
octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, subbus, 1);
device_add_child(dev, "pci", device_get_unit(dev));
return (bus_generic_attach(dev));
}
static int
octopci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct octopci_softc *sc;
sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_DOMAIN:
*result = sc->sc_domain;
return (0);
case PCIB_IVAR_BUS:
*result = sc->sc_bus;
return (0);
}
return (ENOENT);
}
static struct resource *
octopci_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct octopci_softc *sc;
struct resource *res;
struct rman *rm;
int error;
sc = device_get_softc(bus);
switch (type) {
case SYS_RES_IRQ:
res = bus_generic_alloc_resource(bus, child, type, rid, start,
end, count, flags);
if (res != NULL)
return (res);
return (NULL);
case SYS_RES_MEMORY:
rm = &sc->sc_mem1;
break;
case SYS_RES_IOPORT:
rm = &sc->sc_io;
break;
default:
return (NULL);
}
res = rman_reserve_resource(rm, start, end, count, flags, child);
if (res == NULL)
return (NULL);
rman_set_rid(res, *rid);
rman_set_bustag(res, octopci_bus_space);
switch (type) {
case SYS_RES_MEMORY:
rman_set_bushandle(res, sc->sc_mem1_base + rman_get_start(res));
break;
case SYS_RES_IOPORT:
rman_set_bushandle(res, sc->sc_io_base + rman_get_start(res));
#if __mips_n64
rman_set_virtual(res, (void *)rman_get_bushandle(res));
#else
/*
* XXX
* We can't access ports via a 32-bit pointer.
*/
rman_set_virtual(res, NULL);
#endif
break;
}
if ((flags & RF_ACTIVE) != 0) {
error = bus_activate_resource(child, type, *rid, res);
if (error != 0) {
rman_release_resource(res);
return (NULL);
}
}
return (res);
}
static int
octopci_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *res)
{
bus_space_handle_t bh;
int error;
switch (type) {
case SYS_RES_IRQ:
error = bus_generic_activate_resource(bus, child, type, rid,
res);
if (error != 0)
return (error);
return (0);
case SYS_RES_MEMORY:
case SYS_RES_IOPORT:
error = bus_space_map(rman_get_bustag(res),
rman_get_bushandle(res), rman_get_size(res), 0, &bh);
if (error != 0)
return (error);
rman_set_bushandle(res, bh);
break;
default:
return (ENXIO);
}
error = rman_activate_resource(res);
if (error != 0)
return (error);
return (0);
}
static int
octopci_maxslots(device_t dev)
{
return (PCI_SLOTMAX);
}
static uint32_t
octopci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
int bytes)
{
struct octopci_softc *sc;
uint64_t addr;
uint32_t data;
sc = device_get_softc(dev);
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
if (bus == 0 && slot == 0 && func == 0)
return ((uint32_t)-1);
switch (bytes) {
case 4:
return (cvmx_pcie_config_read32(sc->sc_domain, bus, slot, func, reg));
case 2:
return (cvmx_pcie_config_read16(sc->sc_domain, bus, slot, func, reg));
case 1:
return (cvmx_pcie_config_read8(sc->sc_domain, bus, slot, func, reg));
default:
return ((uint32_t)-1);
}
}
addr = octopci_cs_addr(bus, slot, func, reg);
switch (bytes) {
case 4:
data = le32toh(cvmx_read64_uint32(addr));
return (data);
case 2:
data = le16toh(cvmx_read64_uint16(addr));
return (data);
case 1:
data = cvmx_read64_uint8(addr);
return (data);
default:
return ((uint32_t)-1);
}
}
static void
octopci_write_config(device_t dev, u_int bus, u_int slot, u_int func,
u_int reg, uint32_t data, int bytes)
{
struct octopci_softc *sc;
uint64_t addr;
sc = device_get_softc(dev);
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
switch (bytes) {
case 4:
cvmx_pcie_config_write32(sc->sc_domain, bus, slot, func, reg, data);
return;
case 2:
cvmx_pcie_config_write16(sc->sc_domain, bus, slot, func, reg, data);
return;
case 1:
cvmx_pcie_config_write8(sc->sc_domain, bus, slot, func, reg, data);
return;
default:
return;
}
}
addr = octopci_cs_addr(bus, slot, func, reg);
switch (bytes) {
case 4:
cvmx_write64_uint32(addr, htole32(data));
return;
case 2:
cvmx_write64_uint16(addr, htole16(data));
return;
case 1:
cvmx_write64_uint8(addr, data);
return;
default:
return;
}
}
static int
octopci_route_interrupt(device_t dev, device_t child, int pin)
{
struct octopci_softc *sc;
unsigned bus, slot, func;
unsigned irq;
sc = device_get_softc(dev);
if (octeon_has_feature(OCTEON_FEATURE_PCIE))
return (CVMX_IRQ_PCI_INT0 + pin - 1);
bus = pci_get_bus(child);
slot = pci_get_slot(child);
func = pci_get_function(child);
/*
* Board types we have to know at compile-time.
*/
#if defined(OCTEON_BOARD_CAPK_0100ND)
if (bus == 0 && slot == 12 && func == 0)
return (CVMX_IRQ_PCI_INT2);
#endif
/*
* For board types we can determine at runtime.
*/
switch (cvmx_sysinfo_get()->board_type) {
#if defined(OCTEON_VENDOR_LANNER)
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
return (CVMX_IRQ_PCI_INT0 + pin - 1);
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
if (slot < 32) {
if (slot == 3 || slot == 9)
irq = pin;
else
irq = pin - 1;
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
}
break;
#endif
default:
break;
}
irq = slot + pin - 3;
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
}
static unsigned
octopci_init_bar(device_t dev, unsigned b, unsigned s, unsigned f, unsigned barnum, uint8_t *commandp)
{
struct octopci_softc *sc;
uint64_t bar;
unsigned size;
int barsize;
sc = device_get_softc(dev);
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), 0xffffffff, 4);
bar = octopci_read_config(dev, b, s, f, PCIR_BAR(barnum), 4);
if (bar == 0) {
/* Bar not implemented; got to next bar. */
return (barnum + 1);
}
if (PCI_BAR_IO(bar)) {
size = ~(bar & PCIM_BAR_IO_BASE) + 1;
sc->sc_io_next = (sc->sc_io_next + size - 1) & ~(size - 1);
if (sc->sc_io_next + size > CVMX_OCT_PCI_IO_SIZE) {
device_printf(dev, "%02x.%02x:%02x: no ports for BAR%u.\n",
b, s, f, barnum);
return (barnum + 1);
}
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
CVMX_OCT_PCI_IO_BASE + sc->sc_io_next, 4);
sc->sc_io_next += size;
/*
* Enable I/O ports.
*/
*commandp |= PCIM_CMD_PORTEN;
return (barnum + 1);
} else {
if (PCIR_BAR(barnum) == PCIR_BIOS) {
/*
* ROM BAR is always 32-bit.
*/
barsize = 1;
} else {
switch (bar & PCIM_BAR_MEM_TYPE) {
case PCIM_BAR_MEM_64:
/*
* XXX
* High 32 bits are all zeroes for now.
*/
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum + 1), 0, 4);
barsize = 2;
break;
default:
barsize = 1;
break;
}
}
size = ~(bar & (uint32_t)PCIM_BAR_MEM_BASE) + 1;
sc->sc_mem1_next = (sc->sc_mem1_next + size - 1) & ~(size - 1);
if (sc->sc_mem1_next + size > CVMX_OCT_PCI_MEM1_SIZE) {
device_printf(dev, "%02x.%02x:%02x: no memory for BAR%u.\n",
b, s, f, barnum);
return (barnum + barsize);
}
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
CVMX_OCT_PCI_MEM1_BASE + sc->sc_mem1_next, 4);
sc->sc_mem1_next += size;
/*
* Enable memory access.
*/
*commandp |= PCIM_CMD_MEMEN;
return (barnum + barsize);
}
}
static unsigned
octopci_init_device(device_t dev, unsigned b, unsigned s, unsigned f, unsigned secbus)
{
unsigned barnum, bars;
uint8_t brctl;
uint8_t class, subclass;
uint8_t command;
uint8_t hdrtype;
/* Read header type (again.) */
hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
/*
* Disable memory and I/O while programming BARs.
*/
command = octopci_read_config(dev, b, s, f, PCIR_COMMAND, 1);
command &= ~(PCIM_CMD_MEMEN | PCIM_CMD_PORTEN);
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
DELAY(10000);
/* Program BARs. */
switch (hdrtype & PCIM_HDRTYPE) {
case PCIM_HDRTYPE_NORMAL:
bars = 6;
break;
case PCIM_HDRTYPE_BRIDGE:
bars = 2;
break;
case PCIM_HDRTYPE_CARDBUS:
bars = 0;
break;
default:
device_printf(dev, "%02x.%02x:%02x: invalid header type %#x\n",
b, s, f, hdrtype);
return (secbus);
}
barnum = 0;
while (barnum < bars)
barnum = octopci_init_bar(dev, b, s, f, barnum, &command);
/* Enable bus mastering. */
command |= PCIM_CMD_BUSMASTEREN;
/* Enable whatever facilities the BARs require. */
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
DELAY(10000);
/*
* Set cache line size. On Octeon it should be 128 bytes,
* but according to Linux some Intel bridges have trouble
* with values over 64 bytes, so use 64 bytes.
*/
octopci_write_config(dev, b, s, f, PCIR_CACHELNSZ, 16, 1);
/* Set latency timer. */
octopci_write_config(dev, b, s, f, PCIR_LATTIMER, 48, 1);
/* Board-specific or device-specific fixups and workarounds. */
switch (cvmx_sysinfo_get()->board_type) {
#if defined(OCTEON_VENDOR_LANNER)
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
if (b == 1 && s == 7 && f == 0) {
bus_addr_t busaddr, unitbusaddr;
uint32_t bar;
uint32_t tmp;
unsigned unit;
/*
* Set Tx DMA power.
*/
bar = octopci_read_config(dev, b, s, f,
PCIR_BAR(3), 4);
busaddr = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI,
CVMX_OCT_SUBDID_PCI_MEM1));
busaddr += (bar & (uint32_t)PCIM_BAR_MEM_BASE);
for (unit = 0; unit < 4; unit++) {
unitbusaddr = busaddr + 0x430 + (unit << 8);
tmp = le32toh(cvmx_read64_uint32(unitbusaddr));
tmp &= ~0x700;
tmp |= 0x300;
cvmx_write64_uint32(unitbusaddr, htole32(tmp));
}
}
break;
#endif
default:
break;
}
/* Configure PCI-PCI bridges. */
class = octopci_read_config(dev, b, s, f, PCIR_CLASS, 1);
if (class != PCIC_BRIDGE)
return (secbus);
subclass = octopci_read_config(dev, b, s, f, PCIR_SUBCLASS, 1);
if (subclass != PCIS_BRIDGE_PCI)
return (secbus);
/* Enable memory and I/O access. */
command |= PCIM_CMD_MEMEN | PCIM_CMD_PORTEN;
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
/* Enable errors and parity checking. Do a bus reset. */
brctl = octopci_read_config(dev, b, s, f, PCIR_BRIDGECTL_1, 1);
brctl |= PCIB_BCR_PERR_ENABLE | PCIB_BCR_SERR_ENABLE;
/* Perform a secondary bus reset. */
brctl |= PCIB_BCR_SECBUS_RESET;
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
DELAY(100000);
brctl &= ~PCIB_BCR_SECBUS_RESET;
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
secbus++;
/* Program memory and I/O ranges. */
octopci_write_config(dev, b, s, f, PCIR_MEMBASE_1,
CVMX_OCT_PCI_MEM1_BASE >> 16, 2);
octopci_write_config(dev, b, s, f, PCIR_MEMLIMIT_1,
(CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE - 1) >> 16, 2);
octopci_write_config(dev, b, s, f, PCIR_IOBASEL_1,
CVMX_OCT_PCI_IO_BASE >> 8, 1);
octopci_write_config(dev, b, s, f, PCIR_IOBASEH_1,
CVMX_OCT_PCI_IO_BASE >> 16, 2);
octopci_write_config(dev, b, s, f, PCIR_IOLIMITL_1,
(CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 8, 1);
octopci_write_config(dev, b, s, f, PCIR_IOLIMITH_1,
(CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 16, 2);
/* Program prefetchable memory decoder. */
/* XXX */
/* Probe secondary/subordinate buses. */
octopci_write_config(dev, b, s, f, PCIR_PRIBUS_1, b, 1);
octopci_write_config(dev, b, s, f, PCIR_SECBUS_1, secbus, 1);
octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, 0xff, 1);
/* Perform a secondary bus reset. */
brctl |= PCIB_BCR_SECBUS_RESET;
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
DELAY(100000);
brctl &= ~PCIB_BCR_SECBUS_RESET;
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
/* Give the bus time to settle now before reading configspace. */
DELAY(100000);
secbus = octopci_init_bus(dev, secbus);
octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, secbus, 1);
return (secbus);
}
static unsigned
octopci_init_bus(device_t dev, unsigned b)
{
unsigned s, f;
uint8_t hdrtype;
unsigned secbus;
secbus = b;
for (s = 0; s <= PCI_SLOTMAX; s++) {
for (f = 0; f <= PCI_FUNCMAX; f++) {
hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
if (hdrtype == 0xff) {
if (f == 0)
break; /* Next slot. */
continue; /* Next function. */
}
secbus = octopci_init_device(dev, b, s, f, secbus);
if (f == 0 && (hdrtype & PCIM_MFDEV) == 0)
break; /* Next slot. */
}
}
return (secbus);
}
static uint64_t
octopci_cs_addr(unsigned bus, unsigned slot, unsigned func, unsigned reg)
{
octeon_pci_config_space_address_t pci_addr;
pci_addr.u64 = 0;
pci_addr.s.upper = 2;
pci_addr.s.io = 1;
pci_addr.s.did = 3;
pci_addr.s.subdid = CVMX_OCT_SUBDID_PCI_CFG;
pci_addr.s.endian_swap = 1;
pci_addr.s.bus = bus;
pci_addr.s.dev = slot;
pci_addr.s.func = func;
pci_addr.s.reg = reg;
return (pci_addr.u64);
}
static void
octopci_init_pci(device_t dev)
{
cvmx_npi_mem_access_subid_t npi_mem_access_subid;
cvmx_npi_pci_int_arb_cfg_t npi_pci_int_arb_cfg;
cvmx_npi_ctl_status_t npi_ctl_status;
cvmx_pci_ctl_status_2_t pci_ctl_status_2;
cvmx_pci_cfg56_t pci_cfg56;
cvmx_pci_cfg22_t pci_cfg22;
cvmx_pci_cfg16_t pci_cfg16;
cvmx_pci_cfg19_t pci_cfg19;
cvmx_pci_cfg01_t pci_cfg01;
unsigned i;
/*
* Reset the PCI bus.
*/
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1);
cvmx_read_csr(CVMX_CIU_SOFT_PRST);
DELAY(2000);
npi_ctl_status.u64 = 0;
npi_ctl_status.s.max_word = 1;
npi_ctl_status.s.timer = 1;
cvmx_write_csr(CVMX_NPI_CTL_STATUS, npi_ctl_status.u64);
/*
* Set host mode.
*/
switch (cvmx_sysinfo_get()->board_type) {
#if defined(OCTEON_VENDOR_LANNER)
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
/* 32-bit PCI-X */
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x0);
break;
#endif
default:
/* 64-bit PCI-X */
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
break;
}
cvmx_read_csr(CVMX_CIU_SOFT_PRST);
DELAY(2000);
/*
* Enable BARs and configure big BAR mode.
*/
pci_ctl_status_2.u32 = 0;
pci_ctl_status_2.s.bb1_hole = 5; /* 256MB hole in BAR1 */
pci_ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */
pci_ctl_status_2.s.bb_ca = 1; /* Bypass cache for big BAR */
pci_ctl_status_2.s.bb_es = 1; /* Do big BAR byte-swapping */
pci_ctl_status_2.s.bb1 = 1; /* BAR1 is big */
pci_ctl_status_2.s.bb0 = 1; /* BAR0 is big */
pci_ctl_status_2.s.bar2pres = 1; /* BAR2 present */
pci_ctl_status_2.s.pmo_amod = 1; /* Round-robin priority */
pci_ctl_status_2.s.tsr_hwm = 1;
pci_ctl_status_2.s.bar2_enb = 1; /* Enable BAR2 */
pci_ctl_status_2.s.bar2_esx = 1; /* Do BAR2 byte-swapping */
pci_ctl_status_2.s.bar2_cax = 1; /* Bypass cache for BAR2 */
NPI_WRITE(CVMX_NPI_PCI_CTL_STATUS_2, pci_ctl_status_2.u32);
DELAY(2000);
pci_ctl_status_2.u32 = NPI_READ(CVMX_NPI_PCI_CTL_STATUS_2);
device_printf(dev, "%u-bit PCI%s bus.\n",
pci_ctl_status_2.s.ap_64ad ? 64 : 32,
pci_ctl_status_2.s.ap_pcix ? "-X" : "");
/*
* Set up transaction splitting, etc., parameters.
*/
pci_cfg19.u32 = 0;
pci_cfg19.s.mrbcm = 1;
if (pci_ctl_status_2.s.ap_pcix) {
pci_cfg19.s.mdrrmc = 0;
pci_cfg19.s.tdomc = 4;
} else {
pci_cfg19.s.mdrrmc = 2;
pci_cfg19.s.tdomc = 1;
}
NPI_WRITE(CVMX_NPI_PCI_CFG19, pci_cfg19.u32);
NPI_READ(CVMX_NPI_PCI_CFG19);
/*
* Set up PCI error handling and memory access.
*/
pci_cfg01.u32 = 0;
pci_cfg01.s.fbbe = 1;
pci_cfg01.s.see = 1;
pci_cfg01.s.pee = 1;
pci_cfg01.s.me = 1;
pci_cfg01.s.msae = 1;
if (pci_ctl_status_2.s.ap_pcix) {
pci_cfg01.s.fbb = 0;
} else {
pci_cfg01.s.fbb = 1;
}
NPI_WRITE(CVMX_NPI_PCI_CFG01, pci_cfg01.u32);
NPI_READ(CVMX_NPI_PCI_CFG01);
/*
* Enable the Octeon bus arbiter.
*/
npi_pci_int_arb_cfg.u64 = 0;
npi_pci_int_arb_cfg.s.en = 1;
cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, npi_pci_int_arb_cfg.u64);
/*
* Disable master latency timer.
*/
pci_cfg16.u32 = 0;
pci_cfg16.s.mltd = 1;
NPI_WRITE(CVMX_NPI_PCI_CFG16, pci_cfg16.u32);
NPI_READ(CVMX_NPI_PCI_CFG16);
/*
* Configure master arbiter.
*/
pci_cfg22.u32 = 0;
pci_cfg22.s.flush = 1;
pci_cfg22.s.mrv = 255;
NPI_WRITE(CVMX_NPI_PCI_CFG22, pci_cfg22.u32);
NPI_READ(CVMX_NPI_PCI_CFG22);
/*
* Set up PCI-X capabilities.
*/
if (pci_ctl_status_2.s.ap_pcix) {
pci_cfg56.u32 = 0;
pci_cfg56.s.most = 3;
pci_cfg56.s.roe = 1; /* Enable relaxed ordering */
pci_cfg56.s.dpere = 1;
pci_cfg56.s.ncp = 0xe8;
pci_cfg56.s.pxcid = 7;
NPI_WRITE(CVMX_NPI_PCI_CFG56, pci_cfg56.u32);
NPI_READ(CVMX_NPI_PCI_CFG56);
}
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_6, 0x22);
NPI_READ(CVMX_NPI_PCI_READ_CMD_6);
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_C, 0x33);
NPI_READ(CVMX_NPI_PCI_READ_CMD_C);
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_E, 0x33);
NPI_READ(CVMX_NPI_PCI_READ_CMD_E);
/*
* Configure MEM1 sub-DID access.
*/
npi_mem_access_subid.u64 = 0;
npi_mem_access_subid.s.esr = 1; /* Byte-swap on read */
npi_mem_access_subid.s.esw = 1; /* Byte-swap on write */
switch (cvmx_sysinfo_get()->board_type) {
#if defined(OCTEON_VENDOR_LANNER)
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
npi_mem_access_subid.s.shortl = 1;
break;
#endif
default:
break;
}
cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, npi_mem_access_subid.u64);
/*
* Configure BAR2. Linux says this has to come first.
*/
NPI_WRITE(CVMX_NPI_PCI_CFG08, 0x00000000);
NPI_READ(CVMX_NPI_PCI_CFG08);
NPI_WRITE(CVMX_NPI_PCI_CFG09, 0x00000080);
NPI_READ(CVMX_NPI_PCI_CFG09);
/*
* Disable BAR1 IndexX.
*/
for (i = 0; i < 32; i++) {
NPI_WRITE(CVMX_NPI_PCI_BAR1_INDEXX(i), 0);
NPI_READ(CVMX_NPI_PCI_BAR1_INDEXX(i));
}
/*
* Configure BAR0 and BAR1.
*/
NPI_WRITE(CVMX_NPI_PCI_CFG04, 0x00000000);
NPI_READ(CVMX_NPI_PCI_CFG04);
NPI_WRITE(CVMX_NPI_PCI_CFG05, 0x00000000);
NPI_READ(CVMX_NPI_PCI_CFG05);
NPI_WRITE(CVMX_NPI_PCI_CFG06, 0x80000000);
NPI_READ(CVMX_NPI_PCI_CFG06);
NPI_WRITE(CVMX_NPI_PCI_CFG07, 0x00000000);
NPI_READ(CVMX_NPI_PCI_CFG07);
/*
* Clear PCI interrupts.
*/
cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, 0xffffffffffffffffull);
}
static device_method_t octopci_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, octopci_identify),
DEVMETHOD(device_probe, octopci_probe),
DEVMETHOD(device_attach, octopci_attach),
/* Bus interface */
DEVMETHOD(bus_read_ivar, octopci_read_ivar),
DEVMETHOD(bus_alloc_resource, octopci_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource,octopci_activate_resource),
DEVMETHOD(bus_deactivate_resource,bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_add_child, bus_generic_add_child),
/* pcib interface */
DEVMETHOD(pcib_maxslots, octopci_maxslots),
DEVMETHOD(pcib_read_config, octopci_read_config),
DEVMETHOD(pcib_write_config, octopci_write_config),
DEVMETHOD(pcib_route_interrupt, octopci_route_interrupt),
DEVMETHOD_END
};
static driver_t octopci_driver = {
"pcib",
octopci_methods,
sizeof(struct octopci_softc),
};
static devclass_t octopci_devclass;
DRIVER_MODULE(octopci, ciu, octopci_driver, octopci_devclass, 0, 0);