Current Path : /compat/linux/proc/68247/root/sys/netipsec/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //compat/linux/proc/68247/root/sys/netipsec/ipsec_mbuf.c |
/*- * Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/netipsec/ipsec_mbuf.c 199894 2009-11-28 21:01:26Z bz $ */ /* * IPsec-specific mbuf routines. */ #include "opt_param.h" #include <sys/param.h> #include <sys/systm.h> #include <sys/mbuf.h> #include <sys/socket.h> #include <net/route.h> #include <net/vnet.h> #include <netinet/in.h> #include <netipsec/ipsec.h> /* * Make space for a new header of length hlen at skip bytes * into the packet. When doing this we allocate new mbufs only * when absolutely necessary. The mbuf where the new header * is to go is returned together with an offset into the mbuf. * If NULL is returned then the mbuf chain may have been modified; * the caller is assumed to always free the chain. */ struct mbuf * m_makespace(struct mbuf *m0, int skip, int hlen, int *off) { struct mbuf *m; unsigned remain; IPSEC_ASSERT(m0 != NULL, ("null mbuf")); IPSEC_ASSERT(hlen < MHLEN, ("hlen too big: %u", hlen)); for (m = m0; m && skip > m->m_len; m = m->m_next) skip -= m->m_len; if (m == NULL) return (NULL); /* * At this point skip is the offset into the mbuf m * where the new header should be placed. Figure out * if there's space to insert the new header. If so, * and copying the remainder makes sense then do so. * Otherwise insert a new mbuf in the chain, splitting * the contents of m as needed. */ remain = m->m_len - skip; /* data to move */ if (hlen > M_TRAILINGSPACE(m)) { struct mbuf *n0, *n, **np; int todo, len, done, alloc; n0 = NULL; np = &n0; alloc = 0; done = 0; todo = remain; while (todo > 0) { if (todo > MHLEN) { n = m_getcl(M_DONTWAIT, m->m_type, 0); len = MCLBYTES; } else { n = m_get(M_DONTWAIT, m->m_type); len = MHLEN; } if (n == NULL) { m_freem(n0); return NULL; } *np = n; np = &n->m_next; alloc++; len = min(todo, len); memcpy(n->m_data, mtod(m, char *) + skip + done, len); n->m_len = len; done += len; todo -= len; } if (hlen <= M_TRAILINGSPACE(m) + remain) { m->m_len = skip + hlen; *off = skip; if (n0 != NULL) { *np = m->m_next; m->m_next = n0; } } else { n = m_get(M_DONTWAIT, m->m_type); if (n == NULL) { m_freem(n0); return NULL; } alloc++; if ((n->m_next = n0) == NULL) np = &n->m_next; n0 = n; *np = m->m_next; m->m_next = n0; n->m_len = hlen; m->m_len = skip; m = n; /* header is at front ... */ *off = 0; /* ... of new mbuf */ } V_ipsec4stat.ips_mbinserted++; } else { /* * Copy the remainder to the back of the mbuf * so there's space to write the new header. */ bcopy(mtod(m, caddr_t) + skip, mtod(m, caddr_t) + skip + hlen, remain); m->m_len += hlen; *off = skip; } m0->m_pkthdr.len += hlen; /* adjust packet length */ return m; } /* * m_pad(m, n) pads <m> with <n> bytes at the end. The packet header * length is updated, and a pointer to the first byte of the padding * (which is guaranteed to be all in one mbuf) is returned. */ caddr_t m_pad(struct mbuf *m, int n) { register struct mbuf *m0, *m1; register int len, pad; caddr_t retval; if (n <= 0) { /* No stupid arguments. */ DPRINTF(("%s: pad length invalid (%d)\n", __func__, n)); m_freem(m); return NULL; } len = m->m_pkthdr.len; pad = n; m0 = m; while (m0->m_len < len) { len -= m0->m_len; m0 = m0->m_next; } if (m0->m_len != len) { DPRINTF(("%s: length mismatch (should be %d instead of %d)\n", __func__, m->m_pkthdr.len, m->m_pkthdr.len + m0->m_len - len)); m_freem(m); return NULL; } /* Check for zero-length trailing mbufs, and find the last one. */ for (m1 = m0; m1->m_next; m1 = m1->m_next) { if (m1->m_next->m_len != 0) { DPRINTF(("%s: length mismatch (should be %d instead " "of %d)\n", __func__, m->m_pkthdr.len, m->m_pkthdr.len + m1->m_next->m_len)); m_freem(m); return NULL; } m0 = m1->m_next; } if (pad > M_TRAILINGSPACE(m0)) { /* Add an mbuf to the chain. */ MGET(m1, M_DONTWAIT, MT_DATA); if (m1 == 0) { m_freem(m0); DPRINTF(("%s: unable to get extra mbuf\n", __func__)); return NULL; } m0->m_next = m1; m0 = m1; m0->m_len = 0; } retval = m0->m_data + m0->m_len; m0->m_len += pad; m->m_pkthdr.len += pad; return retval; } /* * Remove hlen data at offset skip in the packet. This is used by * the protocols strip protocol headers and associated data (e.g. IV, * authenticator) on input. */ int m_striphdr(struct mbuf *m, int skip, int hlen) { struct mbuf *m1; int roff; /* Find beginning of header */ m1 = m_getptr(m, skip, &roff); if (m1 == NULL) return (EINVAL); /* Remove the header and associated data from the mbuf. */ if (roff == 0) { /* The header was at the beginning of the mbuf */ V_ipsec4stat.ips_input_front++; m_adj(m1, hlen); if ((m1->m_flags & M_PKTHDR) == 0) m->m_pkthdr.len -= hlen; } else if (roff + hlen >= m1->m_len) { struct mbuf *mo; /* * Part or all of the header is at the end of this mbuf, * so first let's remove the remainder of the header from * the beginning of the remainder of the mbuf chain, if any. */ V_ipsec4stat.ips_input_end++; if (roff + hlen > m1->m_len) { /* Adjust the next mbuf by the remainder */ m_adj(m1->m_next, roff + hlen - m1->m_len); /* The second mbuf is guaranteed not to have a pkthdr... */ m->m_pkthdr.len -= (roff + hlen - m1->m_len); } /* Now, let's unlink the mbuf chain for a second...*/ mo = m1->m_next; m1->m_next = NULL; /* ...and trim the end of the first part of the chain...sick */ m_adj(m1, -(m1->m_len - roff)); if ((m1->m_flags & M_PKTHDR) == 0) m->m_pkthdr.len -= (m1->m_len - roff); /* Finally, let's relink */ m1->m_next = mo; } else { /* * The header lies in the "middle" of the mbuf; copy * the remainder of the mbuf down over the header. */ V_ipsec4stat.ips_input_middle++; bcopy(mtod(m1, u_char *) + roff + hlen, mtod(m1, u_char *) + roff, m1->m_len - (roff + hlen)); m1->m_len -= hlen; m->m_pkthdr.len -= hlen; } return (0); } /* * Diagnostic routine to check mbuf alignment as required by the * crypto device drivers (that use DMA). */ void m_checkalignment(const char* where, struct mbuf *m0, int off, int len) { int roff; struct mbuf *m = m_getptr(m0, off, &roff); caddr_t addr; if (m == NULL) return; printf("%s (off %u len %u): ", where, off, len); addr = mtod(m, caddr_t) + roff; do { int mlen; if (((uintptr_t) addr) & 3) { printf("addr misaligned %p,", addr); break; } mlen = m->m_len; if (mlen > len) mlen = len; len -= mlen; if (len && (mlen & 3)) { printf("len mismatch %u,", mlen); break; } m = m->m_next; addr = m ? mtod(m, caddr_t) : NULL; } while (m && len > 0); for (m = m0; m; m = m->m_next) printf(" [%p:%u]", mtod(m, caddr_t), m->m_len); printf("\n"); }