| Current Path : /compat/linux/proc/68247/root/usr/src/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/68247/root/usr/src/Makefile.inc1 |
#
# $FreeBSD: release/9.1.0/Makefile.inc1 237019 2012-06-13 19:53:29Z dim $
#
# Make command line options:
# -DNO_CLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNO_CLEAN do not clean at all
# -DNO_SHARE do not go into share subdir
# -DKERNFAST define NO_KERNEL{CONFIG,CLEAN,DEPEND,OBJ}
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
# -DNO_KERNELOBJ do not run ${MAKE} obj in ${MAKE} buildkernel
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
# -DNO_WWWUPDATE do not update www in ${MAKE} update
# -DNO_CTF do not run the DTrace CTF conversion tools on built objects
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
# TARGET="machine" to crossbuild world for a different machine type
# TARGET_ARCH= may be required when a TARGET supports multiple endians
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# doxygen - build API documentation of the kernel
# update - convenient way to update your source tree (eg: cvsup/cvs)
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
# You are supposed to define both of these when calling Makefile.inc1
# directly. However, some old scripts don't. Cope for the moment, but
# issue a new warning for a transition period.
.if defined(TARGET) && !defined(TARGET_ARCH)
.warning "You must pass both TARGET and TARGET_ARCH to Makefile.inc1. Setting TARGET_ARCH=${TARGET}."
TARGET_ARCH=${TARGET}
.endif
.if !defined(TARGET) || !defined(TARGET_ARCH)
.error "Both TARGET and TARGET_ARCH must be defined."
.endif
.include <bsd.own.mk>
.include <bsd.arch.inc.mk>
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
#
# We must do lib/ and libexec/ before bin/, because if installworld
# installs a new /bin/sh, the 'make' command will *immediately*
# use that new version. And the new (dynamically-linked) /bin/sh
# will expect to find appropriate libraries in /lib and /libexec.
#
SUBDIR= share/info lib libexec
SUBDIR+=bin
.if ${MK_GAMES} != "no"
SUBDIR+=games
.endif
.if ${MK_CDDL} != "no"
SUBDIR+=cddl
.else
NO_CTF=1
.endif
SUBDIR+=gnu include
.if ${MK_KERBEROS} != "no"
SUBDIR+=kerberos5
.endif
.if ${MK_RESCUE} != "no"
SUBDIR+=rescue
.endif
SUBDIR+=sbin
.if ${MK_CRYPT} != "no"
SUBDIR+=secure
.endif
.if !defined(NO_SHARE)
SUBDIR+=share
.endif
SUBDIR+=sys usr.bin usr.sbin
.if ${MK_OFED} != "no"
SUBDIR+=contrib/ofed
.endif
#
# We must do etc/ last for install/distribute to work.
#
SUBDIR+=etc
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.if defined(SUBDIR_OVERRIDE)
SUBDIR= ${SUBDIR_OVERRIDE}
.endif
.if defined(NOCLEAN)
NO_CLEAN= ${NOCLEAN}
.endif
.if defined(NO_CLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
CVS?= cvs
CVSFLAGS?= -A -P -d -I!
SVN?= svn
SVNFLAGS?= -r HEAD
SUP?= /usr/bin/csup
SUPFLAGS?= -g -L 2
.if defined(SUPHOST)
SUPFLAGS+= -h ${SUPHOST}
.endif
MAKEOBJDIRPREFIX?= /usr/obj
.if !defined(OSRELDATE)
.if exists(/usr/include/osreldate.h)
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
/usr/include/osreldate.h
.else
OSRELDATE= 0
.endif
.endif
.if !defined(VERSION)
VERSION!= uname -srp
VERSION+= ${OSRELDATE}
.endif
KNOWN_ARCHES?= amd64 arm armeb/arm i386 i386/pc98 ia64 mipsel/mips mipseb/mips mips64el/mips mips64eb/mips mipsn32el/mips mipsn32eb/mips powerpc powerpc64/powerpc sparc64
.if ${TARGET} == ${TARGET_ARCH}
_t= ${TARGET}
.else
_t= ${TARGET_ARCH}/${TARGET}
.endif
.for _t in ${_t}
.if empty(KNOWN_ARCHES:M${_t})
.error Unknown target ${TARGET_ARCH}:${TARGET}.
.endif
.endfor
.if ${TARGET} == ${MACHINE}
TARGET_CPUTYPE?=${CPUTYPE}
.else
TARGET_CPUTYPE?=
.endif
.if !empty(TARGET_CPUTYPE)
_TARGET_CPUTYPE=${TARGET_CPUTYPE}
.else
_TARGET_CPUTYPE=dummy
.endif
_CPUTYPE!= MAKEFLAGS= CPUTYPE=${_TARGET_CPUTYPE} ${MAKE} \
-f /dev/null -m ${.CURDIR}/share/mk -V CPUTYPE
.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
.error CPUTYPE global should be set with ?=.
.endif
.if make(buildworld)
BUILD_ARCH!= uname -p
.if ${MACHINE_ARCH} != ${BUILD_ARCH}
.error To cross-build, set TARGET_ARCH.
.endif
.endif
.if ${MACHINE} == ${TARGET} && ${MACHINE_ARCH} == ${TARGET_ARCH} && !defined(CROSS_BUILD_TESTING)
OBJTREE= ${MAKEOBJDIRPREFIX}
.else
OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}
.endif
WORLDTMP= ${OBJTREE}${.CURDIR}/tmp
# /usr/games added for fortune which depend on strfile
BPATH= ${WORLDTMP}/legacy/usr/sbin:${WORLDTMP}/legacy/usr/bin:${WORLDTMP}/legacy/usr/games
XPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
STRICTTMPPATH= ${BPATH}:${XPATH}
TMPPATH= ${STRICTTMPPATH}:${PATH}
#
# Avoid running mktemp(1) unless actually needed.
# It may not be functional, e.g., due to new ABI
# when in the middle of installing over this system.
#
.if make(distributeworld) || make(installworld)
INSTALLTMP!= /usr/bin/mktemp -d -u -t install
.endif
#
# Building a world goes through the following stages
#
# 1. legacy stage [BMAKE]
# This stage is responsible for creating compatibility
# shims that are needed by the bootstrap-tools,
# build-tools and cross-tools stages.
# 1. bootstrap-tools stage [BMAKE]
# This stage is responsible for creating programs that
# are needed for backward compatibility reasons. They
# are not built as cross-tools.
# 2. build-tools stage [TMAKE]
# This stage is responsible for creating the object
# tree and building any tools that are needed during
# the build process.
# 3. cross-tools stage [XMAKE]
# This stage is responsible for creating any tools that
# are needed for cross-builds. A cross-compiler is one
# of them.
# 4. world stage [WMAKE]
# This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
# This stage installs a previously built world.
#
BOOTSTRAPPING?= 0
# Common environment for world related stages
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
MACHINE_ARCH=${TARGET_ARCH} \
MACHINE=${TARGET} \
CPUTYPE=${TARGET_CPUTYPE}
.if ${OSRELDATE} < 700044
CROSSENV+= AR=gnu-ar RANLIB=gnu-ranlib
.endif
.if ${MK_GROFF} != "no"
CROSSENV+= GROFF_BIN_PATH=${WORLDTMP}/legacy/usr/bin \
GROFF_FONT_PATH=${WORLDTMP}/legacy/usr/share/groff_font \
GROFF_TMAC_PATH=${WORLDTMP}/legacy/usr/share/tmac
.endif
# bootstrap-tools stage
BMAKEENV= INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${BPATH}:${PATH} \
WORLDTMP=${WORLDTMP} \
VERSION="${VERSION}" \
MAKEFLAGS="-m ${.CURDIR}/tools/build/mk ${.MAKEFLAGS}"
BMAKE= MAKEOBJDIRPREFIX=${WORLDTMP} \
${BMAKEENV} ${MAKE} -f Makefile.inc1 \
DESTDIR= \
BOOTSTRAPPING=${OSRELDATE} \
SSP_CFLAGS= \
-DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT -DWITHOUT_MAN \
-DNO_PIC -DWITHOUT_PROFILE -DNO_SHARED \
-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
# build-tools stage
TMAKE= MAKEOBJDIRPREFIX=${OBJTREE} \
${BMAKEENV} ${MAKE} -f Makefile.inc1 \
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
DESTDIR= \
BOOTSTRAPPING=${OSRELDATE} \
SSP_CFLAGS= \
-DNO_LINT \
-DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF -DEARLY_BUILD
# cross-tools stage
XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} \
TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH} \
-DWITHOUT_GDB
# world stage
WMAKEENV= ${CROSSENV} \
_SHLIBDIRPREFIX=${WORLDTMP} \
_LDSCRIPTROOT= \
VERSION="${VERSION}" \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
.if ${MK_CDDL} == "no"
WMAKEENV+= NO_CTF=1
.endif
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 DESTDIR=${WORLDTMP}
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "powerpc64"
# 32 bit world
LIB32TMP= ${OBJTREE}${.CURDIR}/lib32
.if ${TARGET_ARCH} == "amd64"
.if empty(TARGET_CPUTYPE)
LIB32CPUFLAGS= -march=i686 -mmmx -msse -msse2
.else
LIB32CPUFLAGS= -march=${TARGET_CPUTYPE}
.endif
LIB32WMAKEENV= MACHINE=i386 MACHINE_ARCH=i386 \
MACHINE_CPU="i686 mmx sse sse2" \
LD="${LD} -m elf_i386_fbsd -Y P,${LIB32TMP}/usr/lib32" \
AS="${AS} --32"
.elif ${TARGET_ARCH} == "powerpc64"
.if empty(TARGET_CPUTYPE)
LIB32CPUFLAGS= -mcpu=powerpc
.else
LIB32CPUFLAGS= -mcpu=${TARGET_CPUTYPE}
.endif
LIB32WMAKEENV= MACHINE=powerpc MACHINE_ARCH=powerpc \
LD="${LD} -m elf32ppc"
.endif
LIB32FLAGS= -m32 ${LIB32CPUFLAGS} -DCOMPAT_32BIT \
-isystem ${LIB32TMP}/usr/include/ \
-L${LIB32TMP}/usr/lib32 \
-B${LIB32TMP}/usr/lib32
# Yes, the flags are redundant.
LIB32WMAKEENV+= MAKEOBJDIRPREFIX=${OBJTREE}/lib32 \
_SHLIBDIRPREFIX=${LIB32TMP} \
_LDSCRIPTROOT=${LIB32TMP} \
VERSION="${VERSION}" \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH} \
CC="${CC} ${LIB32FLAGS}" \
CXX="${CXX} ${LIB32FLAGS}" \
LIBDIR=/usr/lib32 \
SHLIBDIR=/usr/lib32
LIB32WMAKE= ${LIB32WMAKEENV} ${MAKE} -DNO_CPU_CFLAGS -DCOMPAT_32BIT \
-DWITHOUT_BIND -DWITHOUT_MAN -DWITHOUT_INFO \
-DWITHOUT_HTML -DNO_CTF -DNO_LINT -ECC -ECXX -EAS -ELD \
DESTDIR=${LIB32TMP}
LIB32IMAKE= ${LIB32WMAKE:NINSTALL=*:NDESTDIR=*:N_LDSCRIPTROOT=*} -DNO_INCS
.endif
# install stage
IMAKEENV= ${CROSSENV:N_LDSCRIPTROOT=*}
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
.if empty(.MAKEFLAGS:M-n)
IMAKEENV+= PATH=${STRICTTMPPATH}:${INSTALLTMP} \
LD_LIBRARY_PATH=${INSTALLTMP} \
PATH_LOCALE=${INSTALLTMP}/locale
IMAKE+= __MAKE_SHELL=${INSTALLTMP}/sh
.else
IMAKEENV+= PATH=${TMPPATH}:${INSTALLTMP}
.endif
# kernel stage
KMAKEENV= ${WMAKEENV}
KMAKE= ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME}
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
_worldtmp:
.if ${.CURDIR:C/[^,]//g} != ""
# The m4 build of sendmail files doesn't like it if ',' is used
# anywhere in the path of it's files.
@echo
@echo "*** Error: path to source tree contains a comma ','"
@echo
false
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding the temporary build tree"
@echo "--------------------------------------------------------------"
.if !defined(NO_CLEAN)
rm -rf ${WORLDTMP}
.if defined(LIB32TMP)
rm -rf ${LIB32TMP}
.endif
.else
rm -rf ${WORLDTMP}/legacy/usr/include
# XXX - These three can depend on any header file.
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/kdump_subr.c
rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
.endif
.for _dir in \
lib usr legacy/usr
mkdir -p ${WORLDTMP}/${_dir}
.endfor
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
-p ${WORLDTMP}/legacy/usr >/dev/null
.if ${MK_GROFF} != "no"
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.groff.dist \
-p ${WORLDTMP}/legacy/usr >/dev/null
.endif
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
-p ${WORLDTMP}/usr >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${WORLDTMP}/usr/include >/dev/null
ln -sf ${.CURDIR}/sys ${WORLDTMP}
.if ${MK_BIND_LIBS} != "no"
mtree -deU -f ${.CURDIR}/etc/mtree/BIND.include.dist \
-p ${WORLDTMP}/usr/include >/dev/null
.endif
_legacy:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1.1: legacy release compatibility shims"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${BMAKE} legacy
_bootstrap-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1.2: bootstrap tools"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${BMAKE} bootstrap-tools
_cleanobj:
.if !defined(NO_CLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.1: cleaning up the object tree"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
.if defined(LIB32TMP)
${_+_}cd ${.CURDIR}; ${LIB32WMAKE} -f Makefile.inc1 ${CLEANDIR:S/^/par-/}
.endif
.endif
_obj:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${WMAKE} par-obj
_build-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.3: build tools"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${TMAKE} build-tools
_cross-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3: cross tools"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${XMAKE} cross-tools
_includes:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4.1: building includes"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
_libraries:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4.2: building libraries"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; \
${WMAKE} -DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
-DWITHOUT_MAN -DWITHOUT_PROFILE libraries
_depend:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4.3: make dependencies"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${WMAKE} par-depend
everything:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4.4: building everything"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${WMAKE} par-all
.if defined(LIB32TMP)
build32:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 5.1: building 32 bit shim libraries"
@echo "--------------------------------------------------------------"
mkdir -p ${LIB32TMP}/usr/include
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
-p ${LIB32TMP}/usr >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${LIB32TMP}/usr/include >/dev/null
mkdir -p ${WORLDTMP}
ln -sf ${.CURDIR}/sys ${WORLDTMP}
.if ${MK_KERBEROS} != "no"
.for _t in obj depend all
cd ${.CURDIR}/kerberos5/tools; \
MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} SSP_CFLAGS= DESTDIR= \
DIRPRFX=kerberos5/tools/ ${_t}
.endfor
.endif
.for _t in obj includes
cd ${.CURDIR}/include; ${LIB32WMAKE} DIRPRFX=include/ ${_t}
cd ${.CURDIR}/lib; ${LIB32WMAKE} DIRPRFX=lib/ ${_t}
.if ${MK_CDDL} != "no"
cd ${.CURDIR}/cddl/lib; ${LIB32WMAKE} DIRPRFX=cddl/lib/ ${_t}
.endif
cd ${.CURDIR}/gnu/lib; ${LIB32WMAKE} DIRPRFX=gnu/lib/ ${_t}
.if ${MK_CRYPT} != "no"
cd ${.CURDIR}/secure/lib; ${LIB32WMAKE} DIRPRFX=secure/lib/ ${_t}
.endif
.if ${MK_KERBEROS} != "no"
cd ${.CURDIR}/kerberos5/lib; ${LIB32WMAKE} DIRPRFX=kerberos5/lib ${_t}
.endif
.endfor
.for _dir in usr.bin/lex/lib
cd ${.CURDIR}/${_dir}; ${LIB32WMAKE} DIRPRFX=${_dir}/ obj
.endfor
.for _dir in lib/ncurses/ncurses lib/ncurses/ncursesw lib/libmagic
cd ${.CURDIR}/${_dir}; \
MAKEOBJDIRPREFIX=${OBJTREE}/lib32 ${MAKE} SSP_CFLAGS= DESTDIR= \
DIRPRFX=${_dir}/ -DNO_LINT -DNO_CPU_CFLAGS -DNO_WARNS -DNO_CTF \
-DEARLY_BUILD build-tools
.endfor
cd ${.CURDIR}; \
${LIB32WMAKE} -f Makefile.inc1 libraries
.for _t in obj depend all
cd ${.CURDIR}/libexec/rtld-elf; PROG=ld-elf32.so.1 ${LIB32WMAKE} \
DIRPRFX=libexec/rtld-elf/ ${_t}
cd ${.CURDIR}/usr.bin/ldd; PROG=ldd32 ${LIB32WMAKE} \
DIRPRFX=usr.bin/ldd ${_t}
.endfor
distribute32 install32:
cd ${.CURDIR}/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.if ${MK_CDDL} != "no"
cd ${.CURDIR}/cddl/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif
cd ${.CURDIR}/gnu/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.if ${MK_CRYPT} != "no"
cd ${.CURDIR}/secure/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif
.if ${MK_KERBEROS} != "no"
cd ${.CURDIR}/kerberos5/lib; ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif
cd ${.CURDIR}/libexec/rtld-elf; \
PROG=ld-elf32.so.1 ${LIB32IMAKE} ${.TARGET:S/32$//}
cd ${.CURDIR}/usr.bin/ldd; PROG=ldd32 ${LIB32IMAKE} ${.TARGET:S/32$//}
.endif
WMAKE_TGTS=
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _worldtmp _legacy _bootstrap-tools
.endif
WMAKE_TGTS+= _cleanobj _obj _build-tools
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _cross-tools
.endif
WMAKE_TGTS+= _includes _libraries _depend everything
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
WMAKE_TGTS+= build32
.endif
buildworld: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
.ORDER: buildworld_prologue ${WMAKE_TGTS} buildworld_epilogue
buildworld_prologue:
@echo "--------------------------------------------------------------"
@echo ">>> World build started on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
buildworld_epilogue:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> World build completed on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
#
# We need to have this as a target because the indirection between Makefile
# and Makefile.inc1 causes the correct PATH to be used, rather than a
# modification of the current environment's PATH. In addition, we need
# to quote multiword values.
#
buildenvvars:
@echo ${WMAKEENV:Q}
buildenv:
@echo Entering world for ${TARGET_ARCH}:${TARGET}
@cd ${.CURDIR} && env ${WMAKEENV} sh || true
TOOLCHAIN_TGTS= ${WMAKE_TGTS:N_depend:Neverything:Nbuild32}
toolchain: ${TOOLCHAIN_TGTS}
kernel-toolchain: ${TOOLCHAIN_TGTS:N_includes:N_libraries}
#
# installcheck
#
# Checks to be sure system is ready for installworld/installkernel.
#
installcheck:
#
# Require DESTDIR to be set if installing for a different architecture.
#
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${TARGET} != ${MACHINE}
.if !make(distributeworld)
installcheck: installcheck_DESTDIR
installcheck_DESTDIR:
.if !defined(DESTDIR) || empty(DESTDIR)
@echo "ERROR: Please set DESTDIR!"; \
false
.endif
.endif
.endif
#
# Check for missing UIDs/GIDs.
#
CHECK_UIDS=
CHECK_GIDS= audit
.if ${MK_SENDMAIL} != "no"
CHECK_UIDS+= smmsp
CHECK_GIDS+= smmsp
.endif
.if ${MK_PF} != "no"
CHECK_UIDS+= proxy
CHECK_GIDS+= proxy authpf
.endif
installcheck: installcheck_UGID
installcheck_UGID:
.for uid in ${CHECK_UIDS}
@if ! `id -u ${uid} >/dev/null 2>&1`; then \
echo "ERROR: Required ${uid} user is missing, see /usr/src/UPDATING."; \
false; \
fi
.endfor
.for gid in ${CHECK_GIDS}
@if ! `find / -prune -group ${gid} >/dev/null 2>&1`; then \
echo "ERROR: Required ${gid} group is missing, see /usr/src/UPDATING."; \
false; \
fi
.endfor
#
# Required install tools to be saved in a scratch dir for safety.
#
.if ${MK_INFO} != "no"
_install-info= install-info
.endif
.if ${MK_ZONEINFO} != "no"
_zoneinfo= zic tzsetup
.endif
ITOOLS= [ awk cap_mkdb cat chflags chmod chown \
date echo egrep find grep ${_install-info} \
ln lockf make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
test true uname wc ${_zoneinfo}
#
# distributeworld
#
# Distributes everything compiled by a `buildworld'.
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
# Non-base distributions produced by the base system
EXTRA_DISTRIBUTIONS= doc games
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
EXTRA_DISTRIBUTIONS+= lib32
.endif
distributeworld installworld: installcheck
mkdir -p ${INSTALLTMP}
progs=$$(for prog in ${ITOOLS}; do \
if progpath=`which $$prog`; then \
echo $$progpath; \
else \
echo "Required tool $$prog not found in PATH." >&2; \
exit 1; \
fi; \
done); \
libs=$$(ldd -f "%o %p\n" -f "%o %p\n" $$progs 2>/dev/null | sort -u | \
while read line; do \
set -- $$line; \
if [ "$$2 $$3" != "not found" ]; then \
echo $$2; \
else \
echo "Required library $$1 not found." >&2; \
exit 1; \
fi; \
done); \
cp $$libs $$progs ${INSTALLTMP}
cp -R $${PATH_LOCALE:-"/usr/share/locale"} ${INSTALLTMP}/locale
.if make(distributeworld)
.for dist in ${EXTRA_DISTRIBUTIONS}
-mkdir ${DESTDIR}/${DISTDIR}/${dist}
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
-p ${DESTDIR}/${DISTDIR}/${dist} >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
-p ${DESTDIR}/${DISTDIR}/${dist}/usr >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${DESTDIR}/${DISTDIR}/${dist}/usr/include >/dev/null
.endfor
-mkdir ${DESTDIR}/${DISTDIR}/base
${_+_}cd ${.CURDIR}; ${IMAKE} distrib-dirs \
DESTDIR=${DESTDIR}/${DISTDIR}/base
.endif
${_+_}cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}; \
${IMAKEENV} rm -rf ${INSTALLTMP}
.if make(distributeworld)
.for dist in ${EXTRA_DISTRIBUTIONS}
find ${DESTDIR}/${DISTDIR}/${dist} -empty -delete
.endfor
.endif
packageworld:
.for dist in base ${EXTRA_DISTRIBUTIONS}
${_+_}cd ${DESTDIR}/${DISTDIR}/${dist}; \
tar cvJf ${DESTDIR}/${DISTDIR}/${dist}.txz .
.endfor
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo ">>> Making hierarchy"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Installing everything"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install32
.endif
redistribute:
@echo "--------------------------------------------------------------"
@echo ">>> Distributing everything"
@echo "--------------------------------------------------------------"
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
.if defined(LIB32TMP) && ${MK_LIB32} != "no"
${_+_}cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute32 \
DISTRIBUTION=lib32
.endif
distrib-dirs distribution:
cd ${.CURDIR}/etc; ${CROSSENV} PATH=${TMPPATH} ${MAKE} ${.TARGET}
#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending TARGET) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use TARGET instead of TARGET_ARCH when
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
# be set to cross-build, we have to make sure TARGET is set
# properly.
.if defined(KERNFAST)
NO_KERNELCLEAN= t
NO_KERNELCONFIG= t
NO_KERNELDEPEND= t
NO_KERNELOBJ= t
# Shortcut for KERNCONF=Blah -DKERNFAST is now KERNFAST=Blah
.if !defined(KERNCONF) && ${KERNFAST} != "1"
KERNCONF=${KERNFAST}
.endif
.endif
.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF= ${KERNEL}
KERNWARN=
.else
.if ${TARGET_ARCH} == "powerpc64"
KERNCONF?= GENERIC64
.else
KERNCONF?= GENERIC
.endif
.endif
INSTKERNNAME?= kernel
KERNSRCDIR?= ${.CURDIR}/sys
KRNLCONFDIR= ${KERNSRCDIR}/${TARGET}/conf
KRNLOBJDIR= ${OBJTREE}${KERNSRCDIR}
KERNCONFDIR?= ${KRNLCONFDIR}
BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KERNCONFDIR}/${_kernel})
BUILDKERNELS+= ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor
#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
.if empty(BUILDKERNELS)
@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF})."; \
false
.endif
.if defined(KERNWARN)
@echo "--------------------------------------------------------------"
@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
@echo "--------------------------------------------------------------"
@sleep 3
.endif
@echo
.for _kernel in ${BUILDKERNELS}
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
@echo "===> ${_kernel}"
mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1: configuring the kernel"
@echo "--------------------------------------------------------------"
cd ${KRNLCONFDIR}; \
PATH=${TMPPATH} \
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
${KERNCONFDIR}/${_kernel}
.endif
.if !defined(NO_CLEAN) && !defined(NO_KERNELCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.1: cleaning up the object tree"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} ${CLEANDIR}
.endif
.if !defined(NO_KERNELOBJ)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} obj
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2.3: build tools"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${_kernel}; \
PATH=${BPATH}:${PATH} \
MAKESRCPATH=${KERNSRCDIR}/dev/aic7xxx/aicasm \
${MAKE} SSP_CFLAGS= -DNO_CPU_CFLAGS -DNO_CTF -DEARLY_BUILD \
-f ${KERNSRCDIR}/dev/aic7xxx/aicasm/Makefile
# XXX - Gratuitously builds aicasm in the ``makeoptions NO_MODULES'' case.
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KERNSRCDIR}/modules)
.for target in obj depend all
cd ${KERNSRCDIR}/modules/aic7xxx/aicasm; \
PATH=${BPATH}:${PATH} \
MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
${MAKE} SSP_CFLAGS= -DNO_CPU_CFLAGS -DNO_CTF -DEARLY_BUILD ${target}
.endfor
.endif
.if !defined(NO_KERNELDEPEND)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3.1: making dependencies"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} depend -DNO_MODULES_OBJ
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3.2: building everything"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${_kernel}; ${KMAKE} all -DNO_MODULES_OBJ
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
.endfor
#
# installkernel, etc.
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel installkernel.debug \
reinstallkernel reinstallkernel.debug: installcheck
.if empty(INSTALLKERNEL)
@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
false
.endif
@echo "--------------------------------------------------------------"
@echo ">>> Installing kernel ${INSTALLKERNEL}"
@echo "--------------------------------------------------------------"
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} PATH=${TMPPATH} \
${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel//}
distributekernel distributekernel.debug:
.if empty(INSTALLKERNEL)
@echo "ERROR: No kernel \"${KERNCONF}\" to install."; \
false
.endif
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} PATH=${TMPPATH} ${MAKE} KERNEL=${INSTKERNNAME} \
DESTDIR=${DESTDIR}/${DISTDIR}/kernel \
${.TARGET:S/distributekernel/install/}
.for _kernel in ${BUILDKERNELS:S/${INSTALLKERNEL}//}
cd ${KRNLOBJDIR}/${_kernel}; \
${CROSSENV} PATH=${TMPPATH} ${MAKE} \
KERNEL=${INSTKERNNAME}.${_kernel} \
DESTDIR=${DESTDIR}/${DISTDIR}/kernel.${_kernel} \
${.TARGET:S/distributekernel/install/}
.endfor
packagekernel:
cd ${DESTDIR}/${DISTDIR}/kernel; \
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.txz .
.for _kernel in ${BUILDKERNELS:S/${INSTALLKERNEL}//}
cd ${DESTDIR}/${DISTDIR}/kernel.${_kernel}; \
tar cvJf ${DESTDIR}/${DISTDIR}/kernel.${_kernel}.txz .
.endfor
#
# doxygen
#
# Build the API documentation with doxygen
#
doxygen:
@if [ ! -x `/usr/bin/which doxygen` ]; then \
echo "You need doxygen (devel/doxygen) to generate the API documentation of the kernel." | /usr/bin/fmt; \
exit 1; \
fi
cd ${.CURDIR}/tools/kerneldoc/subsys && ${MAKE} obj all
#
# update
#
# Update the source tree(s), by running cvsup/cvs/svn to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Running ${SUP}"
@echo "--------------------------------------------------------------"
.if defined(SUPFILE)
@${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.if defined(WWWSUPFILE) && !defined(NO_WWWUPDATE)
@${SUP} ${SUPFLAGS} ${WWWSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
@cd ${.CURDIR} ; \
if [ -d CVS ] ; then \
echo "--------------------------------------------------------------" ; \
echo ">>> Updating ${.CURDIR} from CVS repository" ${CVSROOT} ; \
echo "--------------------------------------------------------------" ; \
echo ${CVS} -R -q update ${CVSFLAGS} ; \
${CVS} -R -q update ${CVSFLAGS} ; \
fi
.endif
.if defined(SVN_UPDATE)
@cd ${.CURDIR} ; \
if [ -d .svn ] ; then \
echo "--------------------------------------------------------------" ; \
echo ">>> Updating ${.CURDIR} using Subversion" ; \
echo "--------------------------------------------------------------" ; \
echo ${SVN} update ${SVNFLAGS} ; \
${SVN} update ${SVNFLAGS} ; \
fi
.endif
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# legacy: Build compatibility shims for the next three targets
#
legacy:
.if ${BOOTSTRAPPING} < 600034 && ${BOOTSTRAPPING} != 0
@echo "ERROR: Source upgrades from versions prior to 6.0 not supported."; \
false
.endif
.for _tool in tools/build
${_+_}@${ECHODIR} "===> ${_tool} (obj,includes,depend,all,install)"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy includes; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
.endfor
#
# bootstrap-tools: Build tools needed for compatibility
#
.if ${MK_GAMES} != "no"
_strfile= games/fortune/strfile
.endif
.if ${MK_CXX} != "no"
_gperf= gnu/usr.bin/gperf
.endif
.if ${MK_GROFF} != "no"
_groff= gnu/usr.bin/groff
.endif
.if ${BOOTSTRAPPING} >= 700044 && ${BOOTSTRAPPING} < 800022
_ar= usr.bin/ar
.endif
.if ${BOOTSTRAPPING} < 800013
_mklocale= usr.bin/mklocale
.endif
.if ${BOOTSTRAPPING} < 900002
_sed= usr.bin/sed
.endif
.if ${BOOTSTRAPPING} < 900006
_lex= usr.bin/lex
.endif
.if ${BOOTSTRAPPING} < 900006 || ${BOOTSTRAPPING} >= 1000013
_yacc= usr.bin/yacc
.endif
.if ${BOOTSTRAPPING} >= 900040 && ${BOOTSTRAPPING} < 900041
_awk= usr.bin/awk
.endif
.if ${MK_BSNMP} != "no" && \
(${BOOTSTRAPPING} < 700018 || !exists(/usr/sbin/gensnmptree))
_gensnmptree= usr.sbin/bsnmpd/gensnmptree
.endif
.if ${MK_RESCUE} != "no" && \
${BOOTSTRAPPING} < 700026
_crunchgen= usr.sbin/crunch/crunchgen
.endif
.if ${MK_CLANG} != "no"
_clang_tblgen= \
lib/clang/libllvmsupport \
lib/clang/libllvmtablegen \
usr.bin/clang/tblgen \
usr.bin/clang/clang-tblgen
.endif
.if ${MK_CDDL} != "no" && \
${BOOTSTRAPPING} < 800038 && \
!(${BOOTSTRAPPING} >= 700112 && ${BOOTSTRAPPING} < 799999)
_dtrace_tools= cddl/usr.bin/sgsmsg cddl/lib/libctf lib/libelf \
lib/libdwarf cddl/usr.bin/ctfconvert cddl/usr.bin/ctfmerge
.endif
.if ${MK_FDT} != "no"
_dtc= gnu/usr.bin/dtc
.endif
# Please document (add comment) why something is in 'bootstrap-tools'.
# Try to bound the building of the bootstrap-tool to just the
# FreeBSD versions that need the tool built at this stage of the build.
bootstrap-tools:
.for _tool in \
${_clang_tblgen} \
${_dtrace_tools} \
${_strfile} \
${_gperf} \
${_groff} \
${_ar} \
${_dtc} \
${_awk} \
usr.bin/lorder \
usr.bin/makewhatis \
${_mklocale} \
usr.bin/rpcgen \
${_sed} \
${_yacc} \
${_lex} \
usr.bin/xinstall \
${_gensnmptree} \
usr.sbin/config \
${_crunchgen}
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX}/legacy install
.endfor
#
# build-tools: Build special purpose build tools
#
.if defined(MODULES_WITH_WORLD) && exists(${KERNSRCDIR}/modules)
_aicasm= sys/modules/aic7xxx/aicasm
.endif
.if !defined(NO_SHARE)
_share= share/syscons/scrnmaps
.endif
.if ${MK_GCC} != "no" && ${MK_CLANG_IS_CC} == "no"
_gcc_tools= gnu/usr.bin/cc/cc_tools
.endif
.if ${MK_KERBEROS} != "no"
_kerberos5_tools= kerberos5/tools
.endif
.if ${MK_RESCUE} != "no"
_rescue= rescue/rescue
.endif
build-tools:
.for _tool in \
bin/csh \
bin/sh \
${_rescue} \
lib/ncurses/ncurses \
lib/ncurses/ncursesw \
${_share} \
${_aicasm} \
usr.bin/awk \
lib/libmagic \
usr.sbin/sysinstall \
usr.bin/mkesdb_static \
usr.bin/mkcsmapper_static
${_+_}@${ECHODIR} "===> ${_tool} (obj,build-tools)"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ build-tools
.endfor
.for _tool in \
${_gcc_tools} \
${_kerberos5_tools}
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all)"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all
.endfor
#
# cross-tools: Build cross-building tools
#
.if ${TARGET_ARCH} != ${MACHINE_ARCH} || ${BOOTSTRAPPING} < 800035
.if ${TARGET_ARCH} == "amd64" || ${TARGET_ARCH} == "i386"
_btxld= usr.sbin/btxld
.endif
.endif
.if ${TARGET_ARCH} != ${MACHINE_ARCH}
.if ${MK_RESCUE} != "no" || defined(RELEASEDIR)
_crunchide= usr.sbin/crunch/crunchide
.endif
.if ${TARGET_ARCH} == "i386" && defined(RELEASEDIR)
_kgzip= usr.sbin/kgzip
.endif
.endif
.if ${MK_BINUTILS} != "no"
_binutils= gnu/usr.bin/binutils
.endif
.if ${MK_CLANG} != "no" && (${MK_CLANG_IS_CC} != "no" || ${CC:T:Mclang} == "clang")
_clang= usr.bin/clang
_clang_libs= lib/clang
.endif
.if ${MK_GCC} != "no" && ${MK_CLANG_IS_CC} == "no"
_cc= gnu/usr.bin/cc
.endif
cross-tools:
.for _tool in \
${_clang_libs} \
${_clang} \
${_binutils} \
${_cc} \
usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint \
${_btxld} \
${_crunchide} \
${_kgzip}
${_+_}@${ECHODIR} "===> ${_tool} (obj,depend,all,install)"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor
#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The list of libraries with dependents (${_prebuild_libs}) and their
# interdependencies (__L) are built automatically by the
# ${.CURDIR}/tools/make_libdeps.sh script.
#
libraries:
cd ${.CURDIR}; \
${MAKE} -f Makefile.inc1 _prereq_libs; \
${MAKE} -f Makefile.inc1 _startup_libs; \
${MAKE} -f Makefile.inc1 _prebuild_libs; \
${MAKE} -f Makefile.inc1 _generic_libs;
#
# static libgcc.a prerequisite for shared libc
#
_prereq_libs= gnu/lib/libssp/libssp_nonshared gnu/lib/libgcc lib/libcompiler_rt
# These dependencies are not automatically generated:
#
# gnu/lib/csu, gnu/lib/libgcc, lib/csu and lib/libc must be built before
# all shared libraries for ELF.
#
_startup_libs= gnu/lib/csu
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
_startup_libs+= lib/csu/${MACHINE_ARCH}-elf
.elif exists(${.CURDIR}/lib/csu/${MACHINE_ARCH})
_startup_libs+= lib/csu/${MACHINE_ARCH}
.else
_startup_libs+= lib/csu/${MACHINE_CPUARCH}
.endif
_startup_libs+= gnu/lib/libgcc
_startup_libs+= lib/libcompiler_rt
_startup_libs+= lib/libc
.if ${MK_LIBCPLUSPLUS} != "no"
_startup_libs+= lib/libcxxrt
.endif
gnu/lib/libgcc__L: lib/libc__L
.if ${MK_LIBCPLUSPLUS} != "no"
lib/libcxxrt__L: gnu/lib/libgcc__L
.endif
_prebuild_libs= ${_kerberos5_lib_libasn1} ${_kerberos5_lib_libhdb} \
${_kerberos5_lib_libheimntlm} \
${_kerberos5_lib_libhx509} ${_kerberos5_lib_libkrb5} \
${_kerberos5_lib_libroken} \
lib/libbz2 lib/libcom_err lib/libcrypt \
lib/libexpat \
${_lib_libgssapi} ${_lib_libipx} \
lib/libkiconv lib/libkvm lib/liblzma lib/libmd \
lib/ncurses/ncurses lib/ncurses/ncursesw \
lib/libopie lib/libpam ${_lib_libthr} \
lib/libradius lib/libsbuf lib/libtacplus \
${_cddl_lib_libumem} \
lib/libutil ${_lib_libypclnt} lib/libz lib/msun \
${_secure_lib_libcrypto} ${_secure_lib_libssh} \
${_secure_lib_libssl}
.if ${MK_LIBTHR} != "no"
_lib_libthr= lib/libthr
.endif
.if ${MK_OFED} != "no"
_ofed_lib= contrib/ofed/usr.lib/
.endif
_generic_libs= ${_cddl_lib} gnu/lib ${_kerberos5_lib} lib ${_secure_lib} usr.bin/lex/lib ${_ofed_lib}
lib/libopie__L lib/libtacplus__L: lib/libmd__L
.if ${MK_CDDL} != "no"
_cddl_lib_libumem= cddl/lib/libumem
_cddl_lib= cddl/lib
.endif
.if ${MK_CRYPT} != "no"
.if ${MK_OPENSSL} != "no"
_secure_lib_libcrypto= secure/lib/libcrypto
_secure_lib_libssl= secure/lib/libssl
lib/libradius__L secure/lib/libssl__L: secure/lib/libcrypto__L
.if ${MK_OPENSSH} != "no"
_secure_lib_libssh= secure/lib/libssh
secure/lib/libssh__L: lib/libz__L secure/lib/libcrypto__L lib/libcrypt__L
.if ${MK_KERBEROS_SUPPORT} != "no"
secure/lib/libssh__L: lib/libgssapi__L kerberos5/lib/libkrb5__L \
kerberos5/lib/libhx509__L kerberos5/lib/libasn1__L lib/libcom_err__L \
lib/libmd__L kerberos5/lib/libroken__L
.endif
.endif
.endif
_secure_lib= secure/lib
.endif
.if ${MK_KERBEROS} != "no"
kerberos5/lib/libasn1__L: lib/libcom_err__L kerberos5/lib/libroken__L
kerberos5/lib/libhdb__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
kerberos5/lib/libkrb5__L kerberos5/lib/libroken__L
kerberos5/lib/libheimntlm__L: secure/lib/libcrypto__L kerberos5/lib/libkrb5__L
kerberos5/lib/libhx509__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
secure/lib/libcrypto__L kerberos5/lib/libroken__L
kerberos5/lib/libkrb5__L: kerberos5/lib/libasn1__L lib/libcom_err__L \
lib/libcrypt__L secure/lib/libcrypto__L kerberos5/lib/libhx509__L \
kerberos5/lib/libroken__L
kerberos5/lib/libroken__L: lib/libcrypt__L
.endif
.if ${MK_GSSAPI} != "no"
_lib_libgssapi= lib/libgssapi
.endif
.if ${MK_IPX} != "no"
_lib_libipx= lib/libipx
.endif
.if ${MK_KERBEROS} != "no"
_kerberos5_lib= kerberos5/lib
_kerberos5_lib_libasn1= kerberos5/lib/libasn1
_kerberos5_lib_libhdb= kerberos5/lib/libhdb
_kerberos5_lib_libkrb5= kerberos5/lib/libkrb5
_kerberos5_lib_libhx509= kerberos5/lib/libhx509
_kerberos5_lib_libroken= kerberos5/lib/libroken
_kerberos5_lib_libheimntlm= kerberos5/lib/libheimntlm
.endif
.if ${MK_NIS} != "no"
_lib_libypclnt= lib/libypclnt
.endif
.if ${MK_OPENSSL} == "no"
lib/libradius__L: lib/libmd__L
.endif
.for _lib in ${_prereq_libs}
${_lib}__PL: .PHONY
.if exists(${.CURDIR}/${_lib})
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
cd ${.CURDIR}/${_lib}; \
${MAKE} DIRPRFX=${_lib}/ obj; \
${MAKE} DIRPRFX=${_lib}/ depend; \
${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ all; \
${MAKE} -DWITHOUT_PROFILE -DNO_PIC DIRPRFX=${_lib}/ install
.endif
.endfor
.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
${_lib}__L: .PHONY
.if exists(${.CURDIR}/${_lib})
${_+_}@${ECHODIR} "===> ${_lib} (obj,depend,all,install)"; \
cd ${.CURDIR}/${_lib}; \
${MAKE} DIRPRFX=${_lib}/ obj; \
${MAKE} DIRPRFX=${_lib}/ depend; \
${MAKE} DIRPRFX=${_lib}/ all; \
${MAKE} DIRPRFX=${_lib}/ install
.endif
.endfor
# libpam is special: we need to build static PAM modules before
# static PAM library, and dynamic PAM library before dynamic PAM
# modules.
lib/libpam__L: .PHONY
${_+_}@${ECHODIR} "===> lib/libpam (obj,depend,all,install)"; \
cd ${.CURDIR}/lib/libpam; \
${MAKE} DIRPRFX=lib/libpam/ obj; \
${MAKE} DIRPRFX=lib/libpam/ depend; \
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
_prereq_libs: ${_prereq_libs:S/$/__PL/}
_startup_libs: ${_startup_libs:S/$/__L/}
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
_generic_libs: ${_generic_libs:S/$/__L/}
.for __target in all clean cleandepend cleandir depend includes obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
${_+_}@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH} (${__target})"; \
edir=${entry}.${MACHINE_ARCH}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry} (${__target})"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>
.if make(check-old) || make(check-old-dirs) || \
make(check-old-files) || make(check-old-libs) || \
make(delete-old) || make(delete-old-dirs) || \
make(delete-old-files) || make(delete-old-libs)
#
# check for / delete old files section
#
.include "ObsoleteFiles.inc"
OLD_LIBS_MESSAGE="Please be sure no application still uses those libraries, \
else you can not start such an application. Consult UPDATING for more \
information regarding how to cope with the removal/revision bump of a \
specific library."
.if !defined(BATCH_DELETE_OLD_FILES)
RM_I=-i
.else
RM_I=-v
.endif
delete-old-files:
@echo ">>> Removing old files (only deletes safe to delete libs)"
# Ask for every old file if the user really wants to remove it.
# It's annoying, but better safe than sorry.
# NB: We cannot pass the list of OLD_FILES as a parameter because the
# argument list will get too long. Using .for/.endfor make "loops" will make
# the Makefile parser segfault.
@exec 3<&0; \
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_FILES -V "OLD_FILES:Musr/share/*.gz:R" | xargs -n1 | \
while read file; do \
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
rm ${RM_I} "${DESTDIR}/$${file}" <&3; \
fi; \
done
# Remove catpages without corresponding manpages.
@exec 3<&0; \
find ${DESTDIR}/usr/share/man/cat* ! -type d | \
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
while read catpage; do \
read manpage; \
if [ ! -e "$${manpage}" ]; then \
rm ${RM_I} $${catpage} <&3; \
fi; \
done
@echo ">>> Old files removed"
check-old-files:
@echo ">>> Checking for old files"
@${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_FILES -V "OLD_FILES:Musr/share/*.gz:R" | xargs -n1 | \
while read file; do \
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
echo "${DESTDIR}/$${file}"; \
fi; \
done
# Check for catpages without corresponding manpages.
@find ${DESTDIR}/usr/share/man/cat* ! -type d | \
sed -ep -e's:${DESTDIR}/usr/share/man/cat:${DESTDIR}/usr/share/man/man:' | \
while read catpage; do \
read manpage; \
if [ ! -e "$${manpage}" ]; then \
echo $${catpage}; \
fi; \
done
delete-old-libs:
@echo ">>> Removing old libraries"
@echo "${OLD_LIBS_MESSAGE}" | fmt
@exec 3<&0; \
${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_LIBS | xargs -n1 | \
while read file; do \
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
chflags noschg "${DESTDIR}/$${file}" 2>/dev/null || true; \
rm ${RM_I} "${DESTDIR}/$${file}" <&3; \
fi; \
done
@echo ">>> Old libraries removed"
check-old-libs:
@echo ">>> Checking for old libraries"
@${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_LIBS | xargs -n1 | \
while read file; do \
if [ -f "${DESTDIR}/$${file}" -o -L "${DESTDIR}/$${file}" ]; then \
echo "${DESTDIR}/$${file}"; \
fi; \
done
delete-old-dirs:
@echo ">>> Removing old directories"
@${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_DIRS | xargs -n1 | \
while read dir; do \
if [ -d "${DESTDIR}/$${dir}" ]; then \
rmdir -v "${DESTDIR}/$${dir}" || true; \
elif [ -L "${DESTDIR}/$${dir}" ]; then \
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
fi; \
done
@echo ">>> Old directories removed"
check-old-dirs:
@echo ">>> Checking for old directories"
@${MAKE} -f ${.CURDIR}/Makefile.inc1 ${.MAKEFLAGS} ${.TARGET} \
-V OLD_DIRS | xargs -n1 | \
while read dir; do \
if [ -d "${DESTDIR}/$${dir}" ]; then \
echo "${DESTDIR}/$${dir}"; \
elif [ -L "${DESTDIR}/$${dir}" ]; then \
echo "${DESTDIR}/$${dir} is a link, please remove everything manually."; \
fi; \
done
delete-old: delete-old-files delete-old-dirs
@echo "To remove old libraries run '${MAKE} delete-old-libs'."
check-old: check-old-files check-old-libs check-old-dirs
@echo "To remove old files and directories run '${MAKE} delete-old'."
@echo "To remove old libraries run '${MAKE} delete-old-libs'."
.endif
#
# showconfig - show build configuration.
#
showconfig:
@${MAKE} -n -f bsd.own.mk -V dummy -dg1 | grep ^MK_ | sort
.if !empty(KRNLOBJDIR) && !empty(KERNCONF)
DTBOUTPUTPATH= ${KRNLOBJDIR}/${KERNCONF}/
.if !defined(FDT_DTS_FILE) || empty(FDT_DTS_FILE)
.if exists(${KERNCONFDIR}/${KERNCONF})
FDT_DTS_FILE!= awk 'BEGIN {FS="="} /^makeoptions[[:space:]]+FDT_DTS_FILE/ {print $$2}' \
${KERNCONFDIR}/${KERNCONF}
.endif
.endif
.endif
.if !defined(DTBOUTPUTPATH) || !exists(${DTBOUTPUTPATH})
DTBOUTPUTPATH= ${.CURDIR}
.endif
#
# Build 'standalone' Device Tree Blob
#
builddtb:
@if [ "${FDT_DTS_FILE}" = "" ]; then \
echo "ERROR: FDT_DTS_FILE must be specified!"; \
exit 1; \
fi; \
if [ ! -f ${.CURDIR}/sys/boot/fdt/dts/${FDT_DTS_FILE} ]; then \
echo "ERROR: Specified DTS file (${FDT_DTS_FILE}) does not \
exist!"; \
exit 1; \
fi; \
if [ "${DTBOUTPUTPATH}" = "${.CURDIR}" ]; then \
echo "WARNING: DTB will be placed in the current working \
directory"; \
fi
@PATH=${TMPPATH} \
dtc -O dtb -o \
${DTBOUTPUTPATH}/`echo ${FDT_DTS_FILE} | cut -d. -f1`.dtb -b 0 \
-p 1024 ${.CURDIR}/sys/boot/fdt/dts/${FDT_DTS_FILE}
###############
.if defined(XDEV) && defined(XDEV_ARCH)
.if ${XDEV} == ${MACHINE} && ${XDEV_ARCH} == ${MACHINE_ARCH}
XDEV_CPUTYPE?=${CPUTYPE}
.else
XDEV_CPUTYPE?=${TARGET_CPUTYPE}
.endif
NOFUN=-DNO_FSCHG -DWITHOUT_HTML -DWITHOUT_INFO -DNO_LINT \
-DWITHOUT_MAN -DWITHOUT_NLS -DWITHOUT_PROFILE \
-DWITHOUT_KERBEROS -DWITHOUT_RESCUE -DNO_WARNS \
TARGET=${XDEV} TARGET_ARCH=${XDEV_ARCH} \
CPUTYPE=${XDEV_CPUTYPE}
XDDIR=${XDEV_ARCH}-freebsd
XDTP=/usr/${XDDIR}
CDBENV=MAKEOBJDIRPREFIX=${MAKEOBJDIRPREFIX}/${XDDIR}
CDENV= ${CDBENV} \
_SHLIBDIRPREFIX=${XDTP} \
TOOLS_PREFIX=${XDTP}
CD2ENV=${CDENV} \
MACHINE=${XDEV} MACHINE_ARCH=${XDEV_ARCH}
CDTMP= ${MAKEOBJDIRPREFIX}/${XDEV}/${.CURDIR}/tmp
CDMAKE=${CDENV} ${MAKE} ${NOFUN}
CD2MAKE=${CD2ENV} PATH=${CDTMP}/usr/bin:${XDTP}/usr/bin:${PATH} ${MAKE} ${NOFUN}
XDDESTDIR=${DESTDIR}${XDTP}
.if !defined(OSREL)
OSREL!= uname -r | sed -e 's/[-(].*//'
.endif
.ORDER: xdev-build xdev-install
xdev: xdev-build xdev-install
.ORDER: _xb-build-tools _xb-cross-tools
xdev-build: _xb-build-tools _xb-cross-tools
_xb-build-tools:
${_+_}@cd ${.CURDIR}; \
${CDBENV} ${MAKE} -f Makefile.inc1 ${NOFUN} build-tools
_xb-cross-tools:
.for _tool in \
gnu/usr.bin/binutils \
gnu/usr.bin/cc \
usr.bin/ar
${_+_}@${ECHODIR} "===> xdev ${_tool} (obj,depend,all)"; \
cd ${.CURDIR}/${_tool}; \
${CDMAKE} DIRPRFX=${_tool}/ obj; \
${CDMAKE} DIRPRFX=${_tool}/ depend; \
${CDMAKE} DIRPRFX=${_tool}/ all
.endfor
_xi-mtree:
${_+_}@${ECHODIR} "mtree populating ${XDDESTDIR}"
mkdir -p ${XDDESTDIR}
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \
-p ${XDDESTDIR} >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \
-p ${XDDESTDIR}/usr >/dev/null
mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \
-p ${XDDESTDIR}/usr/include >/dev/null
.ORDER: _xi-mtree _xi-cross-tools _xi-includes _xi-libraries _xi-links
xdev-install: _xi-mtree _xi-cross-tools _xi-includes _xi-libraries _xi-links
_xi-cross-tools:
@echo "_xi-cross-tools"
.for _tool in \
gnu/usr.bin/binutils \
gnu/usr.bin/cc \
usr.bin/ar
${_+_}@${ECHODIR} "===> xdev ${_tool} (install)"; \
cd ${.CURDIR}/${_tool}; \
${CDMAKE} DIRPRFX=${_tool}/ install DESTDIR=${XDDESTDIR}
.endfor
_xi-includes:
${_+_}cd ${.CURDIR}; ${CD2MAKE} -f Makefile.inc1 par-includes \
DESTDIR=${XDDESTDIR}
_xi-libraries:
${_+_}cd ${.CURDIR}; ${CD2MAKE} -f Makefile.inc1 libraries \
DESTDIR=${XDDESTDIR}
_xi-links:
${_+_}cd ${XDDESTDIR}/usr/bin; \
for i in *; do \
ln -sf ../../${XDTP}/usr/bin/$$i \
../../../../usr/bin/${XDDIR}-$$i; \
ln -sf ../../${XDTP}/usr/bin/$$i \
../../../../usr/bin/${XDDIR}${OSREL}-$$i; \
done
.endif