config root man

/*-
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/scif_sas_smp_activity_clear_affiliation.c 231689 2012-02-14 15:58:49Z jimharris $");

/**
 * @file
 *
 * @brief This file contains the methods for the SCIF_SAS_SMP_REMMOTE object's
 *           clear affiliation activity.
 */
#include <dev/isci/scil/sci_controller.h>
#include <dev/isci/scil/scif_sas_controller.h>
#include <dev/isci/scil/scif_sas_remote_device.h>
#include <dev/isci/scil/scif_sas_logger.h>

#include <dev/isci/scil/scif_sas_smp_remote_device.h>
#include <dev/isci/scil/scif_sas_smp_io_request.h>
#include <dev/isci/scil/intel_sas.h>
#include <dev/isci/scil/scic_io_request.h>
#include <dev/isci/scil/scic_remote_device.h>
#include <dev/isci/scil/scif_sas_smp_phy.h>

//******************************************************************************
//* P R I V A T E   M E T H O D S
//******************************************************************************

/**
 * @brief This method finds the next smp phy (from the anchor_phy) that link to
 *           a SATA end device.
 *
 * @param[in] fw_device the framework SMP device that is clearing affiliation for
 *               its remote SATA devices'
 *
 * @return SCIF_SAS_SMP_PHY_T a smp phy, to which clear affiliation phy control command
 *            is to be sent.
 */
static
SCIF_SAS_SMP_PHY_T * scif_sas_smp_remote_device_find_next_smp_phy_link_to_sata(
   SCIF_SAS_SMP_PHY_T * anchor_phy
)
{
   SCI_FAST_LIST_ELEMENT_T  * element = &anchor_phy->list_element;
   SCIF_SAS_SMP_PHY_T * curr_smp_phy = NULL;

   while (element != NULL)
   {
      curr_smp_phy = (SCIF_SAS_SMP_PHY_T*) sci_fast_list_get_object(element);
      element = sci_fast_list_get_next(element);

      if (curr_smp_phy->attached_device_type == SMP_END_DEVICE_ONLY
          && curr_smp_phy->u.end_device != NULL)
      {
         SMP_DISCOVER_RESPONSE_PROTOCOLS_T  dev_protocols;
         scic_remote_device_get_protocols(
            curr_smp_phy->u.end_device->core_object, &dev_protocols);

         if (dev_protocols.u.bits.attached_stp_target)
            return curr_smp_phy;
      }
   }

   return NULL;
}

//******************************************************************************
//* P U B L I C   M E T H O D S
//******************************************************************************

/**
 * @brief This method starts the clear affiliation activity for a
 *           smp device's remote SATA devices.
 *
 * @param[in] fw_device the framework SMP device that is clearing affiliation for
 *               its remote SATA devices.
 *
 * @return none
 */
void scif_sas_smp_remote_device_start_clear_affiliation(
   SCIF_SAS_REMOTE_DEVICE_T * fw_device
)
{
   SCIF_SAS_SMP_REMOTE_DEVICE_T * smp_device =
      &fw_device->protocol_device.smp_device;

   SCIF_SAS_SMP_PHY_T * phy_to_clear_affiliation = NULL;

   if (smp_device->smp_phy_list.list_head != NULL)
   {
      phy_to_clear_affiliation =
         scif_sas_smp_remote_device_find_next_smp_phy_link_to_sata(
            (SCIF_SAS_SMP_PHY_T *)smp_device->smp_phy_list.list_head->object
         );
   }

   if (phy_to_clear_affiliation != NULL)
   {
      smp_device->curr_clear_affiliation_phy = phy_to_clear_affiliation;

      //set current activity
      fw_device->protocol_device.smp_device.current_activity =
         SCIF_SAS_SMP_REMOTE_DEVICE_ACTIVITY_CLEAR_AFFILIATION;

      //Set current_smp_request to PHY CONTROL.
      fw_device->protocol_device.smp_device.current_smp_request =
         SMP_FUNCTION_PHY_CONTROL;

      //reset discover_to_start flag.
      fw_device->protocol_device.smp_device.scheduled_activity =
         SCIF_SAS_SMP_REMOTE_DEVICE_ACTIVITY_NONE;

      //build PHY Control (clear affiliation) to the phy.
      scif_sas_smp_request_construct_phy_control(
         fw_device->domain->controller,
         fw_device,
         PHY_OPERATION_CLEAR_AFFILIATION,
         phy_to_clear_affiliation->phy_identifier,
         NULL,
         NULL
      );

      //issue DPC to start this request.
      scif_cb_start_internal_io_task_schedule(
         fw_device->domain->controller,
         scif_sas_controller_start_high_priority_io,
         fw_device->domain->controller
      );
   }
   else
      scif_sas_smp_remote_device_finish_clear_affiliation(fw_device);
}


/**
 * @brief This method continues the clear affiliation activity for a
 *           smp device's remote SATA devices.
 *
 * @param[in] fw_device the framework SMP device that is clearing affiliation for
 *               its remote SATA devices.
 *
 * @return none
 */
void scif_sas_smp_remote_device_continue_clear_affiliation(
   SCIF_SAS_REMOTE_DEVICE_T * fw_device
)
{
   SCIF_SAS_SMP_REMOTE_DEVICE_T * smp_device =
      &fw_device->protocol_device.smp_device;

   //search from next immediate smp phy.
   SCIF_SAS_SMP_PHY_T * phy_to_clear_affiliation = NULL;

   if (smp_device->curr_clear_affiliation_phy->list_element.next != NULL)
   {
      phy_to_clear_affiliation =
         scif_sas_smp_remote_device_find_next_smp_phy_link_to_sata(
            smp_device->curr_clear_affiliation_phy->list_element.next->object
         );
   }

   if (phy_to_clear_affiliation != NULL)
   {
      smp_device->curr_clear_affiliation_phy = phy_to_clear_affiliation;

      //build PHY Control (clear affiliation) to the phy.
      scif_sas_smp_request_construct_phy_control(
         fw_device->domain->controller,
         fw_device,
         PHY_OPERATION_CLEAR_AFFILIATION,
         phy_to_clear_affiliation->phy_identifier,
         NULL,
         NULL
      );
   }
   else
      scif_sas_smp_remote_device_finish_clear_affiliation(fw_device);
}


/**
 * @brief This method finishes the clear affiliation activity for a
 *           smp device's remote SATA devices. It then notify the domain it fihishes
 *           the clear affiliation activity.
 *
 * @param[in] fw_device the framework SMP device that is clearing affiliation for
 *               its remote SATA devices.
 *
 * @return none
 */
void scif_sas_smp_remote_device_finish_clear_affiliation(
   SCIF_SAS_REMOTE_DEVICE_T * fw_device
)
{
   SCIF_SAS_DOMAIN_T * fw_domain = fw_device->domain;

   scif_sas_smp_remote_device_clear(fw_device);

   //let domain continue to clear affiliation on other smp devices.
   scif_sas_domain_continue_clear_affiliation(fw_domain);
}