Current Path : /compat/linux/proc/self/root/usr/include/netinet/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //compat/linux/proc/self/root/usr/include/netinet/tcp_offload.h |
/*- * Copyright (c) 2007, Chelsio Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Neither the name of the Chelsio Corporation nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/netinet/tcp_offload.h 218909 2011-02-21 09:01:34Z brucec $ */ #ifndef _NETINET_TCP_OFFLOAD_H_ #define _NETINET_TCP_OFFLOAD_H_ #ifndef _KERNEL #error "no user-serviceable parts inside" #endif /* * A driver publishes that it provides offload services * by setting IFCAP_TOE in the ifnet. The offload connect * will bypass any further work if the interface that a * connection would use does not support TCP offload. * * The TOE API assumes that the tcp offload engine can offload the * the entire connection from set up to teardown, with some provision * being made to allowing the software stack to handle time wait. If * the device does not meet these criteria, it is the driver's responsibility * to overload the functions that it needs to in tcp_usrreqs and make * its own calls to tcp_output if it needs to do so. * * There is currently no provision for the device advertising the congestion * control algorithms it supports as there is currently no API for querying * an operating system for the protocols that it has loaded. This is a desirable * future extension. * * * * It is assumed that individuals deploying TOE will want connections * to be offloaded without software changes so all connections on an * interface providing TOE are offloaded unless the SO_NO_OFFLOAD * flag is set on the socket. * * * The toe_usrreqs structure constitutes the TOE driver's * interface to the TCP stack for functionality that doesn't * interact directly with userspace. If one wants to provide * (optional) functionality to do zero-copy to/from * userspace one still needs to override soreceive/sosend * with functions that fault in and pin the user buffers. * * + tu_send * - tells the driver that new data may have been added to the * socket's send buffer - the driver should not fail if the * buffer is in fact unchanged * - the driver is responsible for providing credits (bytes in the send window) * back to the socket by calling sbdrop() as segments are acknowledged. * - The driver expects the inpcb lock to be held - the driver is expected * not to drop the lock. Hence the driver is not allowed to acquire the * pcbinfo lock during this call. * * + tu_rcvd * - returns credits to the driver and triggers window updates * to the peer (a credit as used here is a byte in the peer's receive window) * - the driver is expected to determine how many bytes have been * consumed and credit that back to the card so that it can grow * the window again by maintaining its own state between invocations. * - In principle this could be used to shrink the window as well as * grow the window, although it is not used for that now. * - this function needs to correctly handle being called any number of * times without any bytes being consumed from the receive buffer. * - The driver expects the inpcb lock to be held - the driver is expected * not to drop the lock. Hence the driver is not allowed to acquire the * pcbinfo lock during this call. * * + tu_disconnect * - tells the driver to send FIN to peer * - driver is expected to send the remaining data and then do a clean half close * - disconnect implies at least half-close so only send, reset, and detach * are legal * - the driver is expected to handle transition through the shutdown * state machine and allow the stack to support SO_LINGER. * - The driver expects the inpcb lock to be held - the driver is expected * not to drop the lock. Hence the driver is not allowed to acquire the * pcbinfo lock during this call. * * + tu_reset * - closes the connection and sends a RST to peer * - driver is expectd to trigger an RST and detach the toepcb * - no further calls are legal after reset * - The driver expects the inpcb lock to be held - the driver is expected * not to drop the lock. Hence the driver is not allowed to acquire the * pcbinfo lock during this call. * * The following fields in the tcpcb are expected to be referenced by the driver: * + iss * + rcv_nxt * + rcv_wnd * + snd_isn * + snd_max * + snd_nxt * + snd_una * + t_flags * + t_inpcb * + t_maxseg * + t_toe * * The following fields in the inpcb are expected to be referenced by the driver: * + inp_lport * + inp_fport * + inp_laddr * + inp_fport * + inp_socket * + inp_ip_tos * * The following fields in the socket are expected to be referenced by the * driver: * + so_comp * + so_error * + so_linger * + so_options * + so_rcv * + so_snd * + so_state * + so_timeo * * These functions all return 0 on success and can return the following errors * as appropriate: * + EPERM: * + ENOBUFS: memory allocation failed * + EMSGSIZE: MTU changed during the call * + EHOSTDOWN: * + EHOSTUNREACH: * + ENETDOWN: * * ENETUNREACH: the peer is no longer reachable * * + tu_detach * - tells driver that the socket is going away so disconnect * the toepcb and free appropriate resources * - allows the driver to cleanly handle the case of connection state * outliving the socket * - no further calls are legal after detach * - the driver is expected to provide its own synchronization between * detach and receiving new data. * * + tu_syncache_event * - even if it is not actually needed, the driver is expected to * call syncache_add for the initial SYN and then syncache_expand * for the SYN,ACK * - tells driver that a connection either has not been added or has * been dropped from the syncache * - the driver is expected to maintain state that lives outside the * software stack so the syncache needs to be able to notify the * toe driver that the software stack is not going to create a connection * for a received SYN * - The driver is responsible for any synchronization required between * the syncache dropping an entry and the driver processing the SYN,ACK. * */ struct toe_usrreqs { int (*tu_send)(struct tcpcb *tp); int (*tu_rcvd)(struct tcpcb *tp); int (*tu_disconnect)(struct tcpcb *tp); int (*tu_reset)(struct tcpcb *tp); void (*tu_detach)(struct tcpcb *tp); void (*tu_syncache_event)(int event, void *toep); }; /* * Proxy for struct tcpopt between TOE drivers and TCP functions. */ struct toeopt { u_int64_t to_flags; /* see tcpopt in tcp_var.h */ u_int16_t to_mss; /* maximum segment size */ u_int8_t to_wscale; /* window scaling */ u_int8_t _pad1; /* explicit pad for 64bit alignment */ u_int32_t _pad2; /* explicit pad for 64bit alignment */ u_int64_t _pad3[4]; /* TBD */ }; #define TOE_SC_ENTRY_PRESENT 1 /* 4-tuple already present */ #define TOE_SC_DROP 2 /* connection was timed out */ /* * Because listen is a one-to-many relationship (a socket can be listening * on all interfaces on a machine some of which may be using different TCP * offload devices), listen uses a publish/subscribe mechanism. The TCP * offload driver registers a listen notification function with the stack. * When a listen socket is created all TCP offload devices are notified * so that they can do the appropriate set up to offload connections on the * port to which the socket is bound. When the listen socket is closed, * the offload devices are notified so that they will stop listening on that * port and free any associated resources as well as sending RSTs on any * connections in the SYN_RCVD state. * */ typedef void (*tcp_offload_listen_start_fn)(void *, struct tcpcb *); typedef void (*tcp_offload_listen_stop_fn)(void *, struct tcpcb *); EVENTHANDLER_DECLARE(tcp_offload_listen_start, tcp_offload_listen_start_fn); EVENTHANDLER_DECLARE(tcp_offload_listen_stop, tcp_offload_listen_stop_fn); /* * Check if the socket can be offloaded by the following steps: * - determine the egress interface * - check the interface for TOE capability and TOE is enabled * - check if the device has resources to offload the connection */ int tcp_offload_connect(struct socket *so, struct sockaddr *nam); /* * The tcp_output_* routines are wrappers around the toe_usrreqs calls * which trigger packet transmission. In the non-offloaded case they * translate to tcp_output. The tcp_offload_* routines notify TOE * of specific events. I the non-offloaded case they are no-ops. * * Listen is a special case because it is a 1 to many relationship * and there can be more than one offload driver in the system. */ /* * Connection is offloaded */ #define tp_offload(tp) ((tp)->t_flags & TF_TOE) /* * hackish way of allowing this file to also be included by TOE * which needs to be kept ignorant of socket implementation details */ #ifdef _SYS_SOCKETVAR_H_ /* * The socket has not been marked as "do not offload" */ #define SO_OFFLOADABLE(so) ((so->so_options & SO_NO_OFFLOAD) == 0) static __inline int tcp_output_connect(struct socket *so, struct sockaddr *nam) { struct tcpcb *tp = sototcpcb(so); int error; /* * If offload has been disabled for this socket or the * connection cannot be offloaded just call tcp_output * to start the TCP state machine. */ #ifndef TCP_OFFLOAD_DISABLE if (!SO_OFFLOADABLE(so) || (error = tcp_offload_connect(so, nam)) != 0) #endif error = tcp_output(tp); return (error); } static __inline int tcp_output_send(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (tp_offload(tp)) return (tp->t_tu->tu_send(tp)); #endif return (tcp_output(tp)); } static __inline int tcp_output_rcvd(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (tp_offload(tp)) return (tp->t_tu->tu_rcvd(tp)); #endif return (tcp_output(tp)); } static __inline int tcp_output_disconnect(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (tp_offload(tp)) return (tp->t_tu->tu_disconnect(tp)); #endif return (tcp_output(tp)); } static __inline int tcp_output_reset(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (tp_offload(tp)) return (tp->t_tu->tu_reset(tp)); #endif return (tcp_output(tp)); } static __inline void tcp_offload_detach(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (tp_offload(tp)) tp->t_tu->tu_detach(tp); #endif } static __inline void tcp_offload_listen_open(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE if (SO_OFFLOADABLE(tp->t_inpcb->inp_socket)) EVENTHANDLER_INVOKE(tcp_offload_listen_start, tp); #endif } static __inline void tcp_offload_listen_close(struct tcpcb *tp) { #ifndef TCP_OFFLOAD_DISABLE EVENTHANDLER_INVOKE(tcp_offload_listen_stop, tp); #endif } #undef SO_OFFLOADABLE #endif /* _SYS_SOCKETVAR_H_ */ #undef tp_offload void tcp_offload_twstart(struct tcpcb *tp); struct tcpcb *tcp_offload_close(struct tcpcb *tp); struct tcpcb *tcp_offload_drop(struct tcpcb *tp, int error); #endif /* _NETINET_TCP_OFFLOAD_H_ */