Current Path : /compat/linux/proc/self/root/usr/local/share/doc/bash/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //compat/linux/proc/self/root/usr/local/share/doc/bash/FAQ |
This is the Bash FAQ, version 4.12, for Bash version 4.2. This document contains a set of frequently-asked questions concerning Bash, the GNU Bourne-Again Shell. Bash is a freely-available command interpreter with advanced features for both interactive use and shell programming. Another good source of basic information about shells is the collection of FAQ articles periodically posted to comp.unix.shell. Questions and comments concerning this document should be sent to chet.ramey@case.edu. This document is available for anonymous FTP with the URL ftp://ftp.cwru.edu/pub/bash/FAQ The Bash home page is http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html ---------- Contents: Section A: The Basics A1) What is it? A2) What's the latest version? A3) Where can I get it? A4) On what machines will bash run? A5) Will bash run on operating systems other than Unix? A6) How can I build bash with gcc? A7) How can I make bash my login shell? A8) I just changed my login shell to bash, and now I can't FTP into my machine. Why not? A9) What's the `POSIX Shell and Utilities standard'? A10) What is the bash `posix mode'? Section B: The latest version B1) What's new in version 4.2? B2) Are there any user-visible incompatibilities between bash-4.2 and previous bash versions? Section C: Differences from other Unix shells C1) How does bash differ from sh, the Bourne shell? C2) How does bash differ from the Korn shell, version ksh88? C3) Which new features in ksh-93 are not in bash, and which are? Section D: Why does bash do some things differently than other Unix shells? D1) Why does bash run a different version of `command' than `which command' says it will? D2) Why doesn't bash treat brace expansions exactly like csh? D3) Why doesn't bash have csh variable modifiers? D4) How can I make my csh aliases work when I convert to bash? D5) How can I pipe standard output and standard error from one command to another, like csh does with `|&'? D6) Now that I've converted from ksh to bash, are there equivalents to ksh features like autoloaded functions and the `whence' command? Section E: Why does bash do certain things the way it does? E1) Why is the bash builtin `test' slightly different from /bin/test? E2) Why does bash sometimes say `Broken pipe'? E3) When I have terminal escape sequences in my prompt, why does bash wrap lines at the wrong column? E4) If I pipe the output of a command into `read variable', why doesn't the output show up in $variable when the read command finishes? E5) I have a bunch of shell scripts that use backslash-escaped characters in arguments to `echo'. Bash doesn't interpret these characters. Why not, and how can I make it understand them? E6) Why doesn't a while or for loop get suspended when I type ^Z? E7) What about empty for loops in Makefiles? E8) Why does the arithmetic evaluation code complain about `08'? E9) Why does the pattern matching expression [A-Z]* match files beginning with every letter except `z'? E10) Why does `cd //' leave $PWD as `//'? E11) If I resize my xterm while another program is running, why doesn't bash notice the change? E12) Why don't negative offsets in substring expansion work like I expect? E13) Why does filename completion misbehave if a colon appears in the filename? E14) Why does quoting the pattern argument to the regular expression matching conditional operator (=~) cause matching to stop working? E15) Tell me more about the shell compatibility level. Section F: Things to watch out for on certain Unix versions F1) Why can't I use command line editing in my `cmdtool'? F2) I built bash on Solaris 2. Why do globbing expansions and filename completion chop off the first few characters of each filename? F3) Why does bash dump core after I interrupt username completion or `~user' tilde expansion on a machine running NIS? F4) I'm running SVR4.2. Why is the line erased every time I type `@'? F5) Why does bash report syntax errors when my C News scripts use a redirection before a subshell command? F6) Why can't I use vi-mode editing on Red Hat Linux 6.1? F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on HP/UX 11.x? Section G: How can I get bash to do certain common things? G1) How can I get bash to read and display eight-bit characters? G2) How do I write a function `x' to replace builtin command `x', but still invoke the command from within the function? G3) How can I find the value of a shell variable whose name is the value of another shell variable? G4) How can I make the bash `time' reserved word print timing output that looks like the output from my system's /usr/bin/time? G5) How do I get the current directory into my prompt? G6) How can I rename "*.foo" to "*.bar"? G7) How can I translate a filename from uppercase to lowercase? G8) How can I write a filename expansion (globbing) pattern that will match all files in the current directory except "." and ".."? Section H: Where do I go from here? H1) How do I report bugs in bash, and where should I look for fixes and advice? H2) What kind of bash documentation is there? H3) What's coming in future versions? H4) What's on the bash `wish list'? H5) When will the next release appear? ---------- Section A: The Basics A1) What is it? Bash is a Unix command interpreter (shell). It is an implementation of the Posix 1003.2 shell standard, and resembles the Korn and System V shells. Bash contains a number of enhancements over those shells, both for interactive use and shell programming. Features geared toward interactive use include command line editing, command history, job control, aliases, and prompt expansion. Programming features include additional variable expansions, shell arithmetic, and a number of variables and options to control shell behavior. Bash was originally written by Brian Fox of the Free Software Foundation. The current developer and maintainer is Chet Ramey of Case Western Reserve University. A2) What's the latest version? The latest version is 4.2, first made available on 14 February, 2011. A3) Where can I get it? Bash is the GNU project's shell, and so is available from the master GNU archive site, ftp.gnu.org, and its mirrors. The latest version is also available for FTP from ftp.cwru.edu. The following URLs tell how to get version 4.2: ftp://ftp.gnu.org/pub/gnu/bash/bash-4.2.tar.gz ftp://ftp.cwru.edu/pub/bash/bash-4.2.tar.gz Formatted versions of the documentation are available with the URLs: ftp://ftp.gnu.org/pub/gnu/bash/bash-doc-4.2.tar.gz ftp://ftp.cwru.edu/pub/bash/bash-doc-4.2.tar.gz Any patches for the current version are available with the URL: ftp://ftp.cwru.edu/pub/bash/bash-4.2-patches/ A4) On what machines will bash run? Bash has been ported to nearly every version of Unix. All you should have to do to build it on a machine for which a port exists is to type `configure' and then `make'. The build process will attempt to discover the version of Unix you have and tailor itself accordingly, using a script created by GNU autoconf. More information appears in the file `INSTALL' in the distribution. The Bash web page (http://cnswww.cns.cwru.edu/~chet/bash/bashtop.html) explains how to obtain binary versions of bash for most of the major commercial Unix systems. A5) Will bash run on operating systems other than Unix? Configuration specifics for Unix-like systems such as QNX and LynxOS are included in the distribution. Bash-2.05 and later versions should compile and run on Minix 2.0 (patches were contributed), but I don't believe anyone has built bash-2.x on earlier Minix versions yet. Bash has been ported to versions of Windows implementing the Win32 programming interface. This includes Windows 95 and Windows NT. The port was done by Cygnus Solutions (now part of Red Hat) as part of their CYGWIN project. For more information about the project, see http://www.cygwin.com/. Cygnus originally ported bash-1.14.7, and that port was part of their early GNU-Win32 (the original name) releases. Cygnus has also done ports of bash-3.2 and bash-4.0 to the CYGWIN environment, and both are available as part of their current release. Bash-2.05b and later versions should require no local Cygnus changes to build and run under CYGWIN. DJ Delorie has a port of bash-2.x which runs under MS-DOS, as part of the DJGPP project. For more information on the project, see http://www.delorie.com/djgpp/ I have been told that the original DJGPP port was done by Daisuke Aoyama. Mark Elbrecht <snowball3@bigfoot.com> has sent me notice that bash-2.04 is available for DJGPP V2. The files are available as: ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204b.zip binary ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204d.zip documentation ftp://ftp.simtel.net/pub/simtelnet/gnu/djgpp/v2gnu/bsh204s.zip source Mark began to work with bash-2.05, but I don't know the current status. Bash-3.0 compiles and runs with no modifications under Microsoft's Services for Unix (SFU), once known as Interix. I do not anticipate any problems with building bash-4.2, but will gladly accept any patches that are needed. A6) How can I build bash with gcc? Bash configures to use gcc by default if it is available. Read the file INSTALL in the distribution for more information. A7) How can I make bash my login shell? Some machines let you use `chsh' to change your login shell. Other systems use `passwd -s' or `passwd -e'. If one of these works for you, that's all you need. Note that many systems require the full pathname to a shell to appear in /etc/shells before you can make it your login shell. For this, you may need the assistance of your friendly local system administrator. If you cannot do this, you can still use bash as your login shell, but you need to perform some tricks. The basic idea is to add a command to your login shell's startup file to replace your login shell with bash. For example, if your login shell is csh or tcsh, and you have installed bash in /usr/gnu/bin/bash, add the following line to ~/.login: if ( -f /usr/gnu/bin/bash ) exec /usr/gnu/bin/bash --login (the `--login' tells bash that it is a login shell). It's not a good idea to put this command into ~/.cshrc, because every csh you run without the `-f' option, even ones started to run csh scripts, reads that file. If you must put the command in ~/.cshrc, use something like if ( $?prompt ) exec /usr/gnu/bin/bash --login to ensure that bash is exec'd only when the csh is interactive. If your login shell is sh or ksh, you have to do two things. First, create an empty file in your home directory named `.bash_profile'. The existence of this file will prevent the exec'd bash from trying to read ~/.profile, and re-execing itself over and over again. ~/.bash_profile is the first file bash tries to read initialization commands from when it is invoked as a login shell. Next, add a line similar to the above to ~/.profile: [ -f /usr/gnu/bin/bash ] && [ -x /usr/gnu/bin/bash ] && \ exec /usr/gnu/bin/bash --login This will cause login shells to replace themselves with bash running as a login shell. Once you have this working, you can copy your initialization code from ~/.profile to ~/.bash_profile. I have received word that the recipe supplied above is insufficient for machines running CDE. CDE has a maze of twisty little startup files, all slightly different. If you cannot change your login shell in the password file to bash, you will have to (apparently) live with CDE using the shell in the password file to run its startup scripts. If you have changed your shell to bash, there is code in the CDE startup files (on Solaris, at least) that attempts to do the right thing. It is, however, often broken, and may require that you use the $BASH_ENV trick described below. `dtterm' claims to use $SHELL as the default program to start, so if you can change $SHELL in the CDE startup files, you should be able to use bash in your terminal windows. Setting DTSOURCEPROFILE in ~/.dtprofile will cause the `Xsession' program to read your login shell's startup files. You may be able to use bash for the rest of the CDE programs by setting SHELL to bash in ~/.dtprofile as well, but I have not tried this. You can use the above `exec' recipe to start bash when not logging in with CDE by testing the value of the DT variable: if [ -n "$DT" ]; then [ -f /usr/gnu/bin/bash ] && exec /usr/gnu/bin/bash --login fi If CDE starts its shells non-interactively during login, the login shell startup files (~/.profile, ~/.bash_profile) will not be sourced at login. To get around this problem, append a line similar to the following to your ~/.dtprofile: BASH_ENV=${HOME}/.bash_profile ; export BASH_ENV and add the following line to the beginning of ~/.bash_profile: unset BASH_ENV A8) I just changed my login shell to bash, and now I can't FTP into my machine. Why not? You must add the full pathname to bash to the file /etc/shells. As noted in the answer to the previous question, many systems require this before you can make bash your login shell. Most versions of ftpd use this file to prohibit `special' users such as `uucp' and `news' from using FTP. A9) What's the `POSIX Shell and Utilities standard'? POSIX is a name originally coined by Richard Stallman for a family of open system standards based on UNIX. There are a number of aspects of UNIX under consideration for standardization, from the basic system services at the system call and C library level to applications and tools to system administration and management. Each area of standardization is assigned to a working group in the 1003 series. The POSIX Shell and Utilities standard was originally developed by IEEE Working Group 1003.2 (POSIX.2). Today it has been merged with the original 1003.1 Working Group and is maintained by the Austin Group (a joint working group of the IEEE, The Open Group and ISO/IEC SC22/WG15). Today the Shell and Utilities are a volume within the set of documents that make up IEEE Std 1003.1-2001, and thus now the former POSIX.2 (from 1992) is now part of the current POSIX.1 standard (POSIX 1003.1-2001). The Shell and Utilities volume concentrates on the command interpreter interface and utility programs commonly executed from the command line or by other programs. The standard is freely available on the web at http://www.UNIX-systems.org/version3/ . Work continues at the Austin Group on maintenance issues; see http://www.opengroup.org/austin/ to join the discussions. Bash is concerned with the aspects of the shell's behavior defined by the POSIX Shell and Utilities volume. The shell command language has of course been standardized, including the basic flow control and program execution constructs, I/O redirection and pipelining, argument handling, variable expansion, and quoting. The `special' builtins, which must be implemented as part of the shell to provide the desired functionality, are specified as being part of the shell; examples of these are `eval' and `export'. Other utilities appear in the sections of POSIX not devoted to the shell which are commonly (and in some cases must be) implemented as builtin commands, such as `read' and `test'. POSIX also specifies aspects of the shell's interactive behavior as part of the UPE, including job control and command line editing. Only vi-style line editing commands have been standardized; emacs editing commands were left out due to objections. The latest version of the POSIX Shell and Utilities standard is available (now updated to the 2004 Edition) as part of the Single UNIX Specification Version 3 at http://www.UNIX-systems.org/version3/ A10) What is the bash `posix mode'? Although bash is an implementation of the POSIX shell specification, there are areas where the bash default behavior differs from that spec. The bash `posix mode' changes the bash behavior in these areas so that it obeys the spec more closely. Posix mode is entered by starting bash with the --posix or '-o posix' option or executing `set -o posix' after bash is running. The specific aspects of bash which change when posix mode is active are listed in the file POSIX in the bash distribution. They are also listed in a section in the Bash Reference Manual (from which that file is generated). Section B: The latest version B1) What's new in version 4.2? Bash-4.2 is the second revision to the fourth major release of bash. Bash-4.2 contains the following new features (see the manual page for complete descriptions and the CHANGES and NEWS files in the bash-4.2 distribution): o `exec -a foo' now sets $0 to `foo' in an executable shell script without a leading #!. o Subshells begun to execute command substitutions or run shell functions or builtins in subshells do not reset trap strings until a new trap is specified. This allows $(trap) to display the caller's traps and the trap strings to persist until a new trap is set. o `trap -p' will now show signals ignored at shell startup, though their disposition still cannot be modified. o $'...', echo, and printf understand \uXXXX and \UXXXXXXXX escape sequences. o declare/typeset has a new `-g' option, which creates variables in the global scope even when run in a shell function. o test/[/[[ have a new -v variable unary operator, which returns success if `variable' has been set. o Posix parsing changes to allow `! time command' and multiple consecutive instances of `!' (which toggle) and `time' (which have no cumulative effect). o Posix change to allow `time' as a command by itself to print the elapsed user, system, and real times for the shell and its children. o $((...)) is always parsed as an arithmetic expansion first, instead of as a potential nested command substitution, as Posix requires. o A new FUNCNEST variable to allow the user to control the maximum shell function nesting (recursive execution) level. o The mapfile builtin now supplies a third argument to the callback command: the line about to be assigned to the supplied array index. o The printf builtin has as new %(fmt)T specifier, which allows time values to use strftime-like formatting. o There is a new `compat41' shell option. o The cd builtin has a new Posix-mandated `-e' option. o Negative subscripts to indexed arrays, previously errors, now are treated as offsets from the maximum assigned index + 1. o Negative length specifications in the ${var:offset:length} expansion, previously errors, are now treated as offsets from the end of the variable. o Parsing change to allow `time -p --'. o Posix-mode parsing change to not recognize `time' as a keyword if the following token begins with a `-'. This means no more Posix-mode `time -p'. Posix interpretation 267. o There is a new `lastpipe' shell option that runs the last command of a pipeline in the current shell context. The lastpipe option has no effect if job control is enabled. o History expansion no longer expands the `$!' variable expansion. o Posix mode shells no longer exit if a variable assignment error occurs with an assignment preceding a command that is not a special builtin. o Non-interactive mode shells exit if -u is enabled an an attempt is made to use an unset variable with the % or # expansions, the `//', `^', or `,' expansions, or the parameter length expansion. o Posix-mode shells use the argument passed to `.' as-is if a $PATH search fails, effectively searching the current directory. Posix-2008 change. A short feature history dating back to Bash-2.0: Bash-4.1 contained the following new features: o Here-documents within $(...) command substitutions may once more be delimited by the closing right paren, instead of requiring a newline. o Bash's file status checks (executable, readable, etc.) now take file system ACLs into account on file systems that support them. o Bash now passes environment variables with names that are not valid shell variable names through into the environment passed to child processes. o The `execute-unix-command' readline function now attempts to clear and reuse the current line rather than move to a new one after the command executes. o `printf -v' can now assign values to array indices. o New `complete -E' and `compopt -E' options that work on the "empty" completion: completion attempted on an empty command line. o New complete/compgen/compopt -D option to define a `default' completion: a completion to be invoked on command for which no completion has been defined. If this function returns 124, programmable completion is attempted again, allowing a user to dynamically build a set of completions as completion is attempted by having the default completion function install individual completion functions each time it is invoked. o When displaying associative arrays, subscripts are now quoted. o Changes to dabbrev-expand to make it more `emacs-like': no space appended after matches, completions are not sorted, and most recent history entries are presented first. o The [[ and (( commands are now subject to the setting of `set -e' and the ERR trap. o The source/. builtin now removes NUL bytes from the file before attempting to parse commands. o There is a new configuration option (in config-top.h) that forces bash to forward all history entries to syslog. o A new variable $BASHOPTS to export shell options settable using `shopt' to child processes. o There is a new confgure option that forces the extglob option to be enabled by default. o New variable $BASH_XTRACEFD; when set to an integer bash will write xtrace output to that file descriptor. o If the optional left-hand-side of a redirection is of the form {var}, the shell assigns the file descriptor used to $var or uses $var as the file descriptor to move or close, depending on the redirection operator. o The < and > operators to the [[ conditional command now do string comparison according to the current locale. o Programmable completion now uses the completion for `b' instead of `a' when completion is attempted on a line like: a $(b c. o Force extglob on temporarily when parsing the pattern argument to the == and != operators to the [[ command, for compatibility. o Changed the behavior of interrupting the wait builtin when a SIGCHLD is received and a trap on SIGCHLD is set to be Posix-mode only. o The read builtin has a new `-N nchars' option, which reads exactly NCHARS characters, ignoring delimiters like newline. o The mapfile/readarray builtin no longer stores the commands it invokes via callbacks in the history list. o There is a new `compat40' shopt option. o The < and > operators to [[ do string comparisons using the current locale only if the compatibility level is greater than 40 (set to 41 by default). o New bindable readline function: menu-complete-backward. o In the readline vi-mode insertion keymap, C-n is now bound to menu-complete by default, and C-p to menu-complete-backward. o When in readline vi command mode, repeatedly hitting ESC now does nothing, even when ESC introduces a bound key sequence. This is closer to how historical vi behaves. o New bindable readline function: skip-csi-sequence. Can be used as a default to consume key sequences generated by keys like Home and End without having to bind all keys. o New bindable readline variable: skip-completed-text, active when completing in the middle of a word. If enabled, it means that characters in the completion that match characters in the remainder of the word are "skipped" rather than inserted into the line. o The pre-readline-6.0 version of menu completion is available as "old-menu-complete" for users who do not like the readline-6.0 version. o New bindable readline variable: echo-control-characters. If enabled, and the tty ECHOCTL bit is set, controls the echoing of characters corresponding to keyboard-generated signals. o New bindable readline variable: enable-meta-key. Controls whether or not readline sends the smm/rmm sequences if the terminal indicates it has a meta key that enables eight-bit characters. Bash-4.0 contained the following new features: o When using substring expansion on the positional parameters, a starting index of 0 now causes $0 to be prefixed to the list. o There is a new variable, $BASHPID, which always returns the process id of the current shell. o There is a new `autocd' option that, when enabled, causes bash to attempt to `cd' to a directory name that is supplied as the first word of a simple command. o There is a new `checkjobs' option that causes the shell to check for and report any running or stopped jobs at exit. o The programmable completion code exports a new COMP_TYPE variable, set to a character describing the type of completion being attempted. o The programmable completion code exports a new COMP_KEY variable, set to the character that caused the completion to be invoked (e.g., TAB). o The programmable completion code now uses the same set of characters as readline when breaking the command line into a list of words. o The block multiplier for the ulimit -c and -f options is now 512 when in Posix mode, as Posix specifies. o Changed the behavior of the read builtin to save any partial input received in the specified variable when the read builtin times out. This also results in variables specified as arguments to read to be set to the empty string when there is no input available. When the read builtin times out, it returns an exit status greater than 128. o The shell now has the notion of a `compatibility level', controlled by new variables settable by `shopt'. Setting this variable currently restores the bash-3.1 behavior when processing quoted strings on the rhs of the `=~' operator to the `[[' command. o The `ulimit' builtin now has new -b (socket buffer size) and -T (number of threads) options. o There is a new `compopt' builtin that allows completion functions to modify completion options for existing completions or the completion currently being executed. o The `read' builtin has a new -i option which inserts text into the reply buffer when using readline. o A new `-E' option to the complete builtin allows control of the default behavior for completion on an empty line. o There is now limited support for completing command name words containing globbing characters. o The `help' builtin now has a new -d option, to display a short description, and a -m option, to print help information in a man page-like format. o There is a new `mapfile' builtin to populate an array with lines from a given file. o If a command is not found, the shell attempts to execute a shell function named `command_not_found_handle', supplying the command words as the function arguments. o There is a new shell option: `globstar'. When enabled, the globbing code treats `**' specially -- it matches all directories (and files within them, when appropriate) recursively. o There is a new shell option: `dirspell'. When enabled, the filename completion code performs spelling correction on directory names during completion. o The `-t' option to the `read' builtin now supports fractional timeout values. o Brace expansion now allows zero-padding of expanded numeric values and will add the proper number of zeroes to make sure all values contain the same number of digits. o There is a new bash-specific bindable readline function: `dabbrev-expand'. It uses menu completion on a set of words taken from the history list. o The command assigned to a key sequence with `bind -x' now sets two new variables in the environment of the executed command: READLINE_LINE_BUFFER and READLINE_POINT. The command can change the current readline line and cursor position by modifying READLINE_LINE_BUFFER and READLINE_POINT, respectively. o There is a new >>& redirection operator, which appends the standard output and standard error to the named file. o The parser now understands `|&' as a synonym for `2>&1 |', which redirects the standard error for a command through a pipe. o The new `;&' case statement action list terminator causes execution to continue with the action associated with the next pattern in the statement rather than terminating the command. o The new `;;&' case statement action list terminator causes the shell to test the next set of patterns after completing execution of the current action, rather than terminating the command. o The shell understands a new variable: PROMPT_DIRTRIM. When set to an integer value greater than zero, prompt expansion of \w and \W will retain only that number of trailing pathname components and replace the intervening characters with `...'. o There are new case-modifying word expansions: uppercase (^[^]) and lowercase (,[,]). They can work on either the first character or array element, or globally. They accept an optional shell pattern that determines which characters to modify. There is an optionally- configured feature to include capitalization operators. o The shell provides associative array variables, with the appropriate support to create, delete, assign values to, and expand them. o The `declare' builtin now has new -l (convert value to lowercase upon assignment) and -u (convert value to uppercase upon assignment) options. There is an optionally-configurable -c option to capitalize a value at assignment. o There is a new `coproc' reserved word that specifies a coprocess: an asynchronous command run with two pipes connected to the creating shell. Coprocs can be named. The input and output file descriptors and the PID of the coprocess are available to the calling shell in variables with coproc-specific names. o A value of 0 for the -t option to `read' now returns success if there is input available to be read from the specified file descriptor. o CDPATH and GLOBIGNORE are ignored when the shell is running in privileged mode. o New bindable readline functions shell-forward-word and shell-backward-word, which move forward and backward words delimited by shell metacharacters and honor shell quoting. o New bindable readline functions shell-backward-kill-word and shell-kill-word which kill words backward and forward, but use the same word boundaries as shell-forward-word and shell-backward-word. Bash-3.2 contained the following new features: o Bash-3.2 now checks shell scripts for NUL characters rather than non-printing characters when deciding whether or not a script is a binary file. o Quoting the string argument to the [[ command's =~ (regexp) operator now forces string matching, as with the other pattern-matching operators. Bash-3.1 contained the following new features: o Bash-3.1 may now be configured and built in a mode that enforces strict POSIX compliance. o The `+=' assignment operator, which appends to the value of a string or array variable, has been implemented. o It is now possible to ignore case when matching in contexts other than filename generation using the new `nocasematch' shell option. Bash-3.0 contained the following new features: o Features to support the bash debugger have been implemented, and there is a new `extdebug' option to turn the non-default options on o HISTCONTROL is now a colon-separated list of options and has been extended with a new `erasedups' option that will result in only one copy of a command being kept in the history list o Brace expansion has been extended with a new {x..y} form, producing sequences of digits or characters o Timestamps are now kept with history entries, with an option to save and restore them from the history file; there is a new HISTTIMEFORMAT variable describing how to display the timestamps when listing history entries o The `[[' command can now perform extended regular expression (egrep-like) matching, with matched subexpressions placed in the BASH_REMATCH array variable o A new `pipefail' option causes a pipeline to return a failure status if any command in it fails o The `jobs', `kill', and `wait' builtins now accept job control notation in their arguments even if job control is not enabled o The `gettext' package and libintl have been integrated, and the shell messages may be translated into other languages Bash-2.05b introduced the following new features: o support for multibyte characters has been added to both bash and readline o the DEBUG trap is now run *before* simple commands, ((...)) commands, [[...]] conditional commands, and for ((...)) loops o the shell now performs arithmetic in the largest integer size the machine supports (intmax_t) o there is a new \D{...} prompt expansion; passes the `...' to strftime(3) and inserts the result into the expanded prompt o there is a new `here-string' redirection operator: <<< word o when displaying variables, function attributes and definitions are shown separately, allowing them to be re-used as input (attempting to re-use the old output would result in syntax errors). o `read' has a new `-u fd' option to read from a specified file descriptor o the bash debugger in examples/bashdb has been modified to work with the new DEBUG trap semantics, the command set has been made more gdb-like, and the changes to $LINENO make debugging functions work better o the expansion of $LINENO inside a shell function is only relative to the function start if the shell is interactive -- if the shell is running a script, $LINENO expands to the line number in the script. This is as POSIX-2001 requires Bash-2.05a introduced the following new features: o The `printf' builtin has undergone major work o There is a new read-only `shopt' option: login_shell, which is set by login shells and unset otherwise o New `\A' prompt string escape sequence; expanding to time in 24-hour HH:MM format o New `-A group/-g' option to complete and compgen; goes group name completion o New [+-]O invocation option to set and unset `shopt' options at startup o ksh-like `ERR' trap o `for' loops now allow empty word lists after the `in' reserved word o new `hard' and `soft' arguments for the `ulimit' builtin o Readline can be configured to place the user at the same point on the line when retrieving commands from the history list o Readline can be configured to skip `hidden' files (filenames with a leading `.' on Unix) when performing completion Bash-2.05 introduced the following new features: o This version has once again reverted to using locales and strcoll(3) when processing pattern matching bracket expressions, as POSIX requires. o Added a new `--init-file' invocation argument as a synonym for `--rcfile', per the new GNU coding standards. o The /dev/tcp and /dev/udp redirections now accept service names as well as port numbers. o `complete' and `compgen' now take a `-o value' option, which controls some of the aspects of that compspec. Valid values are: default - perform bash default completion if programmable completion produces no matches dirnames - perform directory name completion if programmable completion produces no matches filenames - tell readline that the compspec produces filenames, so it can do things like append slashes to directory names and suppress trailing spaces o A new loadable builtin, realpath, which canonicalizes and expands symlinks in pathname arguments. o When `set' is called without options, it prints function defintions in a way that allows them to be reused as input. This affects `declare' and `declare -p' as well. This only happens when the shell is not in POSIX mode, since POSIX.2 forbids this behavior. Bash-2.04 introduced the following new features: o Programmable word completion with the new `complete' and `compgen' builtins; examples are provided in examples/complete/complete-examples o `history' has a new `-d' option to delete a history entry o `bind' has a new `-x' option to bind key sequences to shell commands o The prompt expansion code has new `\j' and `\l' escape sequences o The `no_empty_cmd_completion' shell option, if enabled, inhibits command completion when TAB is typed on an empty line o `help' has a new `-s' option to print a usage synopsis o New arithmetic operators: var++, var--, ++var, --var, expr1,expr2 (comma) o New ksh93-style arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done o `read' has new options: `-t', `-n', `-d', `-s' o The redirection code handles several filenames specially: /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr o The redirection code now recognizes /dev/tcp/HOST/PORT and /dev/udp/HOST/PORT and tries to open a TCP or UDP socket, respectively, to the specified port on the specified host o The ${!prefix*} expansion has been implemented o A new FUNCNAME variable, which expands to the name of a currently-executing function o The GROUPS variable is no longer readonly o A new shopt `xpg_echo' variable, to control the behavior of echo with respect to backslash-escape sequences at runtime o The NON_INTERACTIVE_LOGIN_SHELLS #define has returned The version of Readline released with Bash-2.04, Readline-4.1, had several new features as well: o Parentheses matching is always compiled into readline, and controllable with the new `blink-matching-paren' variable o The history-search-forward and history-search-backward functions now leave point at the end of the line when the search string is empty, like reverse-search-history, and forward-search-history o A new function for applications: rl_on_new_line_with_prompt() o New variables for applications: rl_already_prompted, and rl_gnu_readline_p Bash-2.03 had very few new features, in keeping with the convention that odd-numbered releases provide mainly bug fixes. A number of new features were added to Readline, mostly at the request of the Cygnus folks. A new shopt option, `restricted_shell', so that startup files can test whether or not the shell was started in restricted mode Filename generation is now performed on the words between ( and ) in compound array assignments (this is really a bug fix) OLDPWD is now auto-exported, as POSIX.2 requires ENV and BASH_ENV are read-only variables in a restricted shell Bash may now be linked against an already-installed Readline library, as long as the Readline library is version 4 or newer All shells begun with the `--login' option will source the login shell startup files, even if the shell is not interactive There were lots of changes to the version of the Readline library released along with Bash-2.03. For a complete list of the changes, read the file CHANGES in the Bash-2.03 distribution. Bash-2.02 contained the following new features: a new version of malloc (based on the old GNU malloc code in previous bash versions) that is more page-oriented, more conservative with memory usage, does not `orphan' large blocks when they are freed, is usable on 64-bit machines, and has allocation checking turned on unconditionally POSIX.2-style globbing character classes ([:alpha:], [:alnum:], etc.) POSIX.2-style globbing equivalence classes POSIX.2-style globbing collating symbols the ksh [[...]] extended conditional command the ksh egrep-style extended pattern matching operators a new `printf' builtin the ksh-like $(<filename) command substitution, which is equivalent to $(cat filename) new tilde prefixes that expand to directories from the directory stack new `**' arithmetic operator to do exponentiation case-insensitive globbing (filename expansion) menu completion a la tcsh `magic-space' history expansion function like tcsh the readline inputrc `language' has a new file inclusion directive ($include) Bash-2.01 contained only a few new features: new `GROUPS' builtin array variable containing the user's group list new bindable readline commands: history-and-alias-expand-line and alias-expand-line Bash-2.0 contained extensive changes and new features from bash-1.14.7. Here's a short list: new `time' reserved word to time pipelines, shell builtins, and shell functions one-dimensional arrays with a new compound assignment statement, appropriate expansion constructs and modifications to some of the builtins (read, declare, etc.) to use them new quoting syntaxes for ANSI-C string expansion and locale-specific string translation new expansions to do substring extraction, pattern replacement, and indirect variable expansion new builtins: `disown' and `shopt' new variables: HISTIGNORE, SHELLOPTS, PIPESTATUS, DIRSTACK, GLOBIGNORE, MACHTYPE, BASH_VERSINFO special handling of many unused or redundant variables removed (e.g., $notify, $glob_dot_filenames, $no_exit_on_failed_exec) dynamic loading of new builtin commands; many loadable examples provided new prompt expansions: \a, \e, \n, \H, \T, \@, \v, \V history and aliases available in shell scripts new readline variables: enable-keypad, mark-directories, input-meta, visible-stats, disable-completion, comment-begin new readline commands to manipulate the mark and operate on the region new readline emacs mode commands and bindings for ksh-88 compatibility updated and extended builtins new DEBUG trap expanded (and now documented) restricted shell mode implementation stuff: autoconf-based configuration nearly all of the bugs reported since version 1.14 have been fixed most builtins converted to use builtin `getopt' for consistency most builtins use -p option to display output in a reusable form (for consistency) grammar tighter and smaller (66 reduce-reduce conflicts gone) lots of code now smaller and faster test suite greatly expanded B2) Are there any user-visible incompatibilities between bash-4.2 and previous bash versions? There are a few incompatibilities between version 4.2 and previous versions. They are detailed in the file COMPAT in the bash distribution. That file is not meant to be all-encompassing; send mail to bash-maintainers@gnu.org (or bug-bash@gnu.org if you would like community discussion) if you find something that's not mentioned there. Section C: Differences from other Unix shells C1) How does bash differ from sh, the Bourne shell? This is a non-comprehensive list of features that differentiate bash from the SVR4.2 shell. The bash manual page explains these more completely. Things bash has that sh does not: long invocation options [+-]O invocation option -l invocation option `!' reserved word to invert pipeline return value `time' reserved word to time pipelines and shell builtins the `function' reserved word the `select' compound command and reserved word arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done new $'...' and $"..." quoting the $(...) form of command substitution the $(<filename) form of command substitution, equivalent to $(cat filename) the ${#param} parameter value length operator the ${!param} indirect parameter expansion operator the ${!param*} prefix expansion operator the ${param:offset[:length]} parameter substring operator the ${param/pat[/string]} parameter pattern substitution operator expansions to perform substring removal (${p%[%]w}, ${p#[#]w}) expansion of positional parameters beyond $9 with ${num} variables: BASH, BASHPID, BASH_VERSION, BASH_VERSINFO, UID, EUID, REPLY, TIMEFORMAT, PPID, PWD, OLDPWD, SHLVL, RANDOM, SECONDS, LINENO, HISTCMD, HOSTTYPE, OSTYPE, MACHTYPE, HOSTNAME, ENV, PS3, PS4, DIRSTACK, PIPESTATUS, HISTSIZE, HISTFILE, HISTFILESIZE, HISTCONTROL, HISTIGNORE, GLOBIGNORE, GROUPS, PROMPT_COMMAND, FCEDIT, FIGNORE, IGNOREEOF, INPUTRC, SHELLOPTS, OPTERR, HOSTFILE, TMOUT, FUNCNAME, histchars, auto_resume, PROMPT_DIRTRIM, BASHOPTS, BASH_XTRACEFD DEBUG trap ERR trap variable arrays with new compound assignment syntax redirections: <>, &>, >|, <<<, [n]<&word-, [n]>&word-, >>& prompt string special char translation and variable expansion auto-export of variables in initial environment command search finds functions before builtins bash return builtin will exit a file sourced with `.' builtins: cd -/-L/-P, exec -l/-c/-a, echo -e/-E, hash -d/-l/-p/-t. export -n/-f/-p/name=value, pwd -L/-P, read -e/-p/-a/-t/-n/-d/-s/-u/-i/-N, readonly -a/-f/name=value, trap -l, set +o, set -b/-m/-o option/-h/-p/-B/-C/-H/-P, unset -f/-v, ulimit -i/-m/-p/-q/-u/-x, type -a/-p/-t/-f/-P, suspend -f, kill -n, test -o optname/s1 == s2/s1 < s2/s1 > s2/-nt/-ot/-ef/-O/-G/-S bash reads ~/.bashrc for interactive shells, $ENV for non-interactive bash restricted shell mode is more extensive bash allows functions and variables with the same name brace expansion tilde expansion arithmetic expansion with $((...)) and `let' builtin the `[[...]]' extended conditional command process substitution aliases and alias/unalias builtins local variables in functions and `local' builtin readline and command-line editing with programmable completion command history and history/fc builtins csh-like history expansion other new bash builtins: bind, command, compgen, complete, builtin, declare/typeset, dirs, enable, fc, help, history, logout, popd, pushd, disown, shopt, printf, compopt, mapfile exported functions filename generation when using output redirection (command >a*) POSIX.2-style globbing character classes POSIX.2-style globbing equivalence classes POSIX.2-style globbing collating symbols egrep-like extended pattern matching operators case-insensitive pattern matching and globbing variable assignments preceding commands affect only that command, even for builtins and functions posix mode and strict posix conformance redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr, /dev/tcp/host/port, /dev/udp/host/port debugger support, including `caller' builtin and new variables RETURN trap the `+=' assignment operator autocd shell option and behavior command-not-found hook with command_not_found_handle shell function globstar shell option and `**' globbing behavior |& synonym for `2>&1 |' ;& and ;;& case action list terminators case-modifying word expansions and variable attributes associative arrays coprocesses using the `coproc' reserved word and variables shell assignment of a file descriptor used in a redirection to a variable Things sh has that bash does not: uses variable SHACCT to do shell accounting includes `stop' builtin (bash can use alias stop='kill -s STOP') `newgrp' builtin turns on job control if called as `jsh' $TIMEOUT (like bash $TMOUT) `^' is a synonym for `|' new SVR4.2 sh builtins: mldmode, priv Implementation differences: redirection to/from compound commands causes sh to create a subshell bash does not allow unbalanced quotes; sh silently inserts them at EOF bash does not mess with signal 11 sh sets (euid, egid) to (uid, gid) if -p not supplied and uid < 100 bash splits only the results of expansions on IFS, using POSIX.2 field splitting rules; sh splits all words on IFS sh does not allow MAILCHECK to be unset (?) sh does not allow traps on SIGALRM or SIGCHLD bash allows multiple option arguments when invoked (e.g. -x -v); sh allows only a single option argument (`sh -x -v' attempts to open a file named `-v', and, on SunOS 4.1.4, dumps core. On Solaris 2.4 and earlier versions, sh goes into an infinite loop.) sh exits a script if any builtin fails; bash exits only if one of the POSIX.2 `special' builtins fails C2) How does bash differ from the Korn shell, version ksh88? Things bash has or uses that ksh88 does not: long invocation options [-+]O invocation option -l invocation option `!' reserved word arithmetic for command: for ((expr1 ; expr2; expr3 )); do list; done arithmetic in largest machine-supported size (intmax_t) posix mode and posix conformance command hashing tilde expansion for assignment statements that look like $PATH process substitution with named pipes if /dev/fd is not available the ${!param} indirect parameter expansion operator the ${!param*} prefix expansion operator the ${param:offset[:length]} parameter substring operator the ${param/pat[/string]} parameter pattern substitution operator variables: BASH, BASH_VERSION, BASH_VERSINFO, BASHPID, UID, EUID, SHLVL, TIMEFORMAT, HISTCMD, HOSTTYPE, OSTYPE, MACHTYPE, HISTFILESIZE, HISTIGNORE, HISTCONTROL, PROMPT_COMMAND, IGNOREEOF, FIGNORE, INPUTRC, HOSTFILE, DIRSTACK, PIPESTATUS, HOSTNAME, OPTERR, SHELLOPTS, GLOBIGNORE, GROUPS, FUNCNAME, histchars, auto_resume, PROMPT_DIRTRIM prompt expansion with backslash escapes and command substitution redirection: &> (stdout and stderr), <<<, [n]<&word-, [n]>&word-, >>& more extensive and extensible editing and programmable completion builtins: bind, builtin, command, declare, dirs, echo -e/-E, enable, exec -l/-c/-a, fc -s, export -n/-f/-p, hash, help, history, jobs -x/-r/-s, kill -s/-n/-l, local, logout, popd, pushd, read -e/-p/-a/-t/-n/-d/-s/-N, readonly -a/-n/-f/-p, set -o braceexpand/-o histexpand/-o interactive-comments/ -o notify/-o physical/-o posix/-o hashall/-o onecmd/ -h/-B/-C/-b/-H/-P, set +o, suspend, trap -l, type, typeset -a/-F/-p, ulimit -i/-q/-u/-x, umask -S, alias -p, shopt, disown, printf, complete, compgen, compopt, mapfile `!' csh-style history expansion POSIX.2-style globbing character classes POSIX.2-style globbing equivalence classes POSIX.2-style globbing collating symbols egrep-like extended pattern matching operators case-insensitive pattern matching and globbing `**' arithmetic operator to do exponentiation redirection to /dev/fd/N, /dev/stdin, /dev/stdout, /dev/stderr arrays of unlimited size TMOUT is default timeout for `read' and `select' debugger support, including the `caller' builtin RETURN trap Timestamps in history entries {x..y} brace expansion The `+=' assignment operator autocd shell option and behavior command-not-found hook with command_not_found_handle shell function globstar shell option and `**' globbing behavior |& synonym for `2>&1 |' ;& and ;;& case action list terminators case-modifying word expansions and variable attributes associative arrays coprocesses using the `coproc' reserved word and variables shell assignment of a file descriptor used in a redirection to a variable Things ksh88 has or uses that bash does not: tracked aliases (alias -t) variables: ERRNO, FPATH, EDITOR, VISUAL co-processes (bash uses different syntax) weirdly-scoped functions typeset +f to list all function names without definitions text of command history kept in a file, not memory builtins: alias -x, cd old new, newgrp, print, read -p/-s/var?prompt, set -A/-o gmacs/ -o bgnice/-o markdirs/-o trackall/-o viraw/-s, typeset -H/-L/-R/-Z/-A/-ft/-fu/-fx/-t, whence using environment to pass attributes of exported variables arithmetic evaluation done on arguments to some builtins reads .profile from $PWD when invoked as login shell Implementation differences: ksh runs last command of a pipeline in parent shell context bash has brace expansion by default (ksh88 compile-time option) bash has fixed startup file for all interactive shells; ksh reads $ENV bash has exported functions bash command search finds functions before builtins bash waits for all commands in pipeline to exit before returning status emacs-mode editing has some slightly different key bindings C3) Which new features in ksh-93 are not in bash, and which are? This list is current through ksh93t+ (05/05/2009) New things in ksh-93 not in bash-4.2: floating point arithmetic and variables math library functions ${!name[sub]} name of subscript for associative array `.' is allowed in variable names to create a hierarchical namespace more extensive compound assignment syntax discipline functions KEYBD trap variables: .sh.edchar, .sh.edmode, .sh.edcol, .sh.edtext, .sh.version, .sh.name, .sh.subscript, .sh.value, .sh.match, HISTEDIT backreferences in pattern matching (\N) `&' operator in pattern lists for matching (match all instead of any) exit statuses between 0 and 255 FPATH and PATH mixing lexical scoping for local variables in `ksh' functions no scoping for local variables in `POSIX' functions $'' \C[.collating-element.] escape sequence -C/-I invocation options print -f (bash uses printf) `fc' has been renamed to `hist' `.' can execute shell functions getopts -a printf %B, %H, %P, %R, %Z modifiers, output base for %d, `=' flag read -n/-N differ/-v set -o showme/-o multiline (bash default) `sleep' and `getconf' builtins (bash has loadable versions) typeset -n and `nameref' variables [[ -R name ]] (checks whether or not name is a nameref) typeset -C/-S/-T/-X/-h/-s experimental `type' definitions (a la typedef) using typeset array expansions ${array[sub1..sub2]} and ${!array[sub1..sub2]} associative array assignments using `;' as element separator command substitution $(n<#) expands to current byte offset for fd N new '${ ' form of command substitution, executed in current shell new >;/<>;/<#pat/<##pat/<#/># redirections brace expansion printf-like formats New things in ksh-93 present in bash-4.2: associative arrays [n]<&word- and [n]>&word- redirections (combination dup and close) for (( expr1; expr2; expr3 )) ; do list; done - arithmetic for command ?:, ++, --, `expr1 , expr2' arithmetic operators expansions: ${!param}, ${param:offset[:len]}, ${param/pat[/str]}, ${!param*} compound array assignment negative subscripts for indexed array variables the `!' reserved word loadable builtins -- but ksh uses `builtin' while bash uses `enable' new $'...' and $"..." quoting FIGNORE (but bash uses GLOBIGNORE), HISTCMD brace expansion and set -B changes to kill builtin `command', `builtin', `disown' builtins echo -e exec -c/-a printf %T modifier read -A (bash uses read -a) read -t/-d trap -p `.' restores the positional parameters when it completes set -o notify/-C set -o pipefail set -G (-o globstar) and ** POSIX.2 `test' umask -S unalias -a command and arithmetic substitution performed on PS1, PS4, and ENV command name completion, TAB displaying possible completions ENV processed only for interactive shells The `+=' assignment operator the `;&' case statement "fallthrough" pattern list terminator csh-style history expansion and set -H negative offsets in ${param:offset:length} redirection operators preceded with {varname} to store fd number in varname DEBUG can force skipping following command [[ -v var ]] operator (checks whether or not var is set) Section D: Why does bash do some things differently than other Unix shells? D1) Why does bash run a different version of `command' than `which command' says it will? On many systems, `which' is actually a csh script that assumes you're running csh. In tcsh, `which' and its cousin `where' are builtins. On other Unix systems, `which' is a perl script that uses the PATH environment variable. Many Linux distributions use GNU `which', which is a C program that can understand shell aliases. The csh script version reads the csh startup files from your home directory and uses those to determine which `command' will be invoked. Since bash doesn't use any of those startup files, there's a good chance that your bash environment differs from your csh environment. The bash `type' builtin does everything `which' does, and will report correct results for the running shell. If you're really wedded to the name `which', try adding the following function definition to your .bashrc: which() { builtin type "$@" } If you're moving from tcsh and would like to bring `where' along as well, use this function: where() { builtin type -a "$@" } D2) Why doesn't bash treat brace expansions exactly like csh? The only difference between bash and csh brace expansion is that bash requires a brace expression to contain at least one unquoted comma if it is to be expanded. Any brace-surrounded word not containing an unquoted comma is left unchanged by the brace expansion code. This affords the greatest degree of sh compatibility. Bash, ksh, zsh, and pd-ksh all implement brace expansion this way. D3) Why doesn't bash have csh variable modifiers? Posix has specified a more powerful, albeit somewhat more cryptic, mechanism cribbed from ksh, and bash implements it. ${parameter%word} Remove smallest suffix pattern. The WORD is expanded to produce a pattern. It then expands to the value of PARAMETER, with the smallest portion of the suffix matched by the pattern deleted. x=file.c echo ${x%.c}.o -->file.o ${parameter%%word} Remove largest suffix pattern. The WORD is expanded to produce a pattern. It then expands to the value of PARAMETER, with the largest portion of the suffix matched by the pattern deleted. x=posix/src/std echo ${x%%/*} -->posix ${parameter#word} Remove smallest prefix pattern. The WORD is expanded to produce a pattern. It then expands to the value of PARAMETER, with the smallest portion of the prefix matched by the pattern deleted. x=$HOME/src/cmd echo ${x#$HOME} -->/src/cmd ${parameter##word} Remove largest prefix pattern. The WORD is expanded to produce a pattern. It then expands to the value of PARAMETER, with the largest portion of the prefix matched by the pattern deleted. x=/one/two/three echo ${x##*/} -->three Given a=/a/b/c/d b=b.xxx csh bash result --- ---- ------ $a:h ${a%/*} /a/b/c $a:t ${a##*/} d $b:r ${b%.*} b $b:e ${b##*.} xxx D4) How can I make my csh aliases work when I convert to bash? Bash uses a different syntax to support aliases than csh does. The details can be found in the documentation. We have provided a shell script which does most of the work of conversion for you; this script can be found in ./examples/misc/aliasconv.sh. Here is how you use it: Start csh in the normal way for you. (e.g., `csh') Pipe the output of `alias' through `aliasconv.sh', saving the results into `bash_aliases': alias | bash aliasconv.sh >bash_aliases Edit `bash_aliases', carefully reading through any created functions. You will need to change the names of some csh specific variables to the bash equivalents. The script converts $cwd to $PWD, $term to $TERM, $home to $HOME, $user to $USER, and $prompt to $PS1. You may also have to add quotes to avoid unwanted expansion. For example, the csh alias: alias cd 'cd \!*; echo $cwd' is converted to the bash function: cd () { command cd "$@"; echo $PWD ; } The only thing that needs to be done is to quote $PWD: cd () { command cd "$@"; echo "$PWD" ; } Merge the edited file into your ~/.bashrc. There is an additional, more ambitious, script in examples/misc/cshtobash that attempts to convert your entire csh environment to its bash equivalent. This script can be run as simply `cshtobash' to convert your normal interactive environment, or as `cshtobash ~/.login' to convert your login environment. D5) How can I pipe standard output and standard error from one command to another, like csh does with `|&'? Use command 2>&1 | command2 The key is to remember that piping is performed before redirection, so file descriptor 1 points to the pipe when it is duplicated onto file descriptor 2. D6) Now that I've converted from ksh to bash, are there equivalents to ksh features like autoloaded functions and the `whence' command? There are features in ksh-88 and ksh-93 that do not have direct bash equivalents. Most, however, can be emulated with very little trouble. ksh-88 feature Bash equivalent -------------- --------------- compiled-in aliases set up aliases in .bashrc; some ksh aliases are bash builtins (hash, history, type) coprocesses named pipe pairs (one for read, one for write) typeset +f declare -F cd, print, whence function substitutes in examples/functions/kshenv autoloaded functions examples/functions/autoload is the same as typeset -fu read var?prompt read -p prompt var ksh-93 feature Bash equivalent -------------- --------------- sleep, getconf Bash has loadable versions in examples/loadables ${.sh.version} $BASH_VERSION print -f printf hist alias hist=fc $HISTEDIT $FCEDIT Section E: How can I get bash to do certain things, and why does bash do things the way it does? E1) Why is the bash builtin `test' slightly different from /bin/test? The specific example used here is [ ! x -o x ], which is false. Bash's builtin `test' implements the Posix.2 spec, which can be summarized as follows (the wording is due to David Korn): Here is the set of rules for processing test arguments. 0 Args: False 1 Arg: True iff argument is not null. 2 Args: If first arg is !, True iff second argument is null. If first argument is unary, then true if unary test is true Otherwise error. 3 Args: If second argument is a binary operator, do binary test of $1 $3 If first argument is !, negate two argument test of $2 $3 If first argument is `(' and third argument is `)', do the one-argument test of the second argument. Otherwise error. 4 Args: If first argument is !, negate three argument test of $2 $3 $4. Otherwise unspecified 5 or more Args: unspecified. (Historical shells would use their current algorithm). The operators -a and -o are considered binary operators for the purpose of the 3 Arg case. As you can see, the test becomes (not (x or x)), which is false. E2) Why does bash sometimes say `Broken pipe'? If a sequence of commands appears in a pipeline, and one of the reading commands finishes before the writer has finished, the writer receives a SIGPIPE signal. Many other shells special-case SIGPIPE as an exit status in the pipeline and do not report it. For example, in: ps -aux | head `head' can finish before `ps' writes all of its output, and ps will try to write on a pipe without a reader. In that case, bash will print `Broken pipe' to stderr when ps is killed by a SIGPIPE. As of bash-3.1, bash does not report SIGPIPE errors by default. You can build a version of bash that will report such errors. E3) When I have terminal escape sequences in my prompt, why does bash wrap lines at the wrong column? Readline, the line editing library that bash uses, does not know that the terminal escape sequences do not take up space on the screen. The redisplay code assumes, unless told otherwise, that each character in the prompt is a `printable' character that takes up one character position on the screen. You can use the bash prompt expansion facility (see the PROMPTING section in the manual page) to tell readline that sequences of characters in the prompt strings take up no screen space. Use the \[ escape to begin a sequence of non-printing characters, and the \] escape to signal the end of such a sequence. E4) If I pipe the output of a command into `read variable', why doesn't the output show up in $variable when the read command finishes? This has to do with the parent-child relationship between Unix processes. It affects all commands run in pipelines, not just simple calls to `read'. For example, piping a command's output into a `while' loop that repeatedly calls `read' will result in the same behavior. Each element of a pipeline, even a builtin or shell function, runs in a separate process, a child of the shell running the pipeline. A subprocess cannot affect its parent's environment. When the `read' command sets the variable to the input, that variable is set only in the subshell, not the parent shell. When the subshell exits, the value of the variable is lost. Many pipelines that end with `read variable' can be converted into command substitutions, which will capture the output of a specified command. The output can then be assigned to a variable: grep ^gnu /usr/lib/news/active | wc -l | read ngroup can be converted into ngroup=$(grep ^gnu /usr/lib/news/active | wc -l) This does not, unfortunately, work to split the text among multiple variables, as read does when given multiple variable arguments. If you need to do this, you can either use the command substitution above to read the output into a variable and chop up the variable using the bash pattern removal expansion operators or use some variant of the following approach. Say /usr/local/bin/ipaddr is the following shell script: #! /bin/sh host `hostname` | awk '/address/ {print $NF}' Instead of using /usr/local/bin/ipaddr | read A B C D to break the local machine's IP address into separate octets, use OIFS="$IFS" IFS=. set -- $(/usr/local/bin/ipaddr) IFS="$OIFS" A="$1" B="$2" C="$3" D="$4" Beware, however, that this will change the shell's positional parameters. If you need them, you should save them before doing this. This is the general approach -- in most cases you will not need to set $IFS to a different value. Some other user-supplied alternatives include: read A B C D << HERE $(IFS=.; echo $(/usr/local/bin/ipaddr)) HERE and, where process substitution is available, read A B C D < <(IFS=.; echo $(/usr/local/bin/ipaddr)) E5) I have a bunch of shell scripts that use backslash-escaped characters in arguments to `echo'. Bash doesn't interpret these characters. Why not, and how can I make it understand them? This is the behavior of echo on most Unix System V machines. The bash builtin `echo' is modeled after the 9th Edition Research Unix version of `echo'. It does not interpret backslash-escaped characters in its argument strings by default; it requires the use of the -e option to enable the interpretation. The System V echo provides no way to disable the special characters; the bash echo has a -E option to disable them. There is a configuration option that will make bash behave like the System V echo and interpret things like `\t' by default. Run configure with the --enable-xpg-echo-default option to turn this on. Be aware that this will cause some of the tests run when you type `make tests' to fail. There is a shell option, `xpg_echo', settable with `shopt', that will change the behavior of echo at runtime. Enabling this option turns on expansion of backslash-escape sequences. E6) Why doesn't a while or for loop get suspended when I type ^Z? This is a consequence of how job control works on Unix. The only thing that can be suspended is the process group. This is a single command or pipeline of commands that the shell forks and executes. When you run a while or for loop, the only thing that the shell forks and executes are any commands in the while loop test and commands in the loop bodies. These, therefore, are the only things that can be suspended when you type ^Z. If you want to be able to stop the entire loop, you need to put it within parentheses, which will force the loop into a subshell that may be stopped (and subsequently restarted) as a single unit. E7) What about empty for loops in Makefiles? It's fairly common to see constructs like this in automatically-generated Makefiles: SUBDIRS = @SUBDIRS@ ... subdirs-clean: for d in ${SUBDIRS}; do \ ( cd $$d && ${MAKE} ${MFLAGS} clean ) \ done When SUBDIRS is empty, this results in a command like this being passed to bash: for d in ; do ( cd $d && ${MAKE} ${MFLAGS} clean ) done In versions of bash before bash-2.05a, this was a syntax error. If the reserved word `in' was present, a word must follow it before the semicolon or newline. The language in the manual page referring to the list of words being empty referred to the list after it is expanded. These versions of bash required that there be at least one word following the `in' when the construct was parsed. The idiomatic Makefile solution is something like: SUBDIRS = @SUBDIRS@ subdirs-clean: subdirs=$SUBDIRS ; for d in $$subdirs; do \ ( cd $$d && ${MAKE} ${MFLAGS} clean ) \ done The latest updated POSIX standard has changed this: the word list is no longer required. Bash versions 2.05a and later accept the new syntax. E8) Why does the arithmetic evaluation code complain about `08'? The bash arithmetic evaluation code (used for `let', $(()), (()), and in other places), interprets a leading `0' in numeric constants as denoting an octal number, and a leading `0x' as denoting hexadecimal. This is in accordance with the POSIX.2 spec, section 2.9.2.1, which states that arithmetic constants should be handled as signed long integers as defined by the ANSI/ISO C standard. The POSIX.2 interpretation committee has confirmed this: http://www.pasc.org/interps/unofficial/db/p1003.2/pasc-1003.2-173.html E9) Why does the pattern matching expression [A-Z]* match files beginning with every letter except `z'? Bash-2.03, Bash-2.05 and later versions honor the current locale setting when processing ranges within pattern matching bracket expressions ([A-Z]). This is what POSIX.2 and SUSv3/XPG6 specify. The behavior of the matcher in bash-2.05 and later versions depends on the current LC_COLLATE setting. Setting this variable to `C' or `POSIX' will result in the traditional behavior ([A-Z] matches all uppercase ASCII characters). Many other locales, including the en_US locale (the default on many US versions of Linux) collate the upper and lower case letters like this: AaBb...Zz which means that [A-Z] matches every letter except `z'. Others collate like aAbBcC...zZ which means that [A-Z] matches every letter except `a'. The portable way to specify upper case letters is [:upper:] instead of A-Z; lower case may be specified as [:lower:] instead of a-z. Look at the manual pages for setlocale(3), strcoll(3), and, if it is present, locale(1). If you have locale(1), you can use it to find your current locale information even if you do not have any of the LC_ variables set. My advice is to put export LC_COLLATE=C into /etc/profile and inspect any shell scripts run from cron for constructs like [A-Z]. This will prevent things like rm [A-Z]* from removing every file in the current directory except those beginning with `z' and still allow individual users to change the collation order. Users may put the above command into their own profiles as well, of course. E10) Why does `cd //' leave $PWD as `//'? POSIX.2, in its description of `cd', says that *three* or more leading slashes may be replaced with a single slash when canonicalizing the current working directory. This is, I presume, for historical compatibility. Certain versions of Unix, and early network file systems, used paths of the form //hostname/path to access `path' on server `hostname'. E11) If I resize my xterm while another program is running, why doesn't bash notice the change? This is another issue that deals with job control. The kernel maintains a notion of a current terminal process group. Members of this process group (processes whose process group ID is equal to the current terminal process group ID) receive terminal-generated signals like SIGWINCH. (For more details, see the JOB CONTROL section of the bash man page.) If a terminal is resized, the kernel sends SIGWINCH to each member of the terminal's current process group (the `foreground' process group). When bash is running with job control enabled, each pipeline (which may be a single command) is run in its own process group, different from bash's process group. This foreground process group receives the SIGWINCH; bash does not. Bash has no way of knowing that the terminal has been resized. There is a `checkwinsize' option, settable with the `shopt' builtin, that will cause bash to check the window size and adjust its idea of the terminal's dimensions each time a process stops or exits and returns control of the terminal to bash. Enable it with `shopt -s checkwinsize'. E12) Why don't negative offsets in substring expansion work like I expect? When substring expansion of the form ${param:offset[:length} is used, an `offset' that evaluates to a number less than zero counts back from the end of the expanded value of $param. When a negative `offset' begins with a minus sign, however, unexpected things can happen. Consider a=12345678 echo ${a:-4} intending to print the last four characters of $a. The problem is that ${param:-word} already has a well-defined meaning: expand to word if the expanded value of param is unset or null, and $param otherwise. To use negative offsets that begin with a minus sign, separate the minus sign and the colon with a space. E13) Why does filename completion misbehave if a colon appears in the filename? Filename completion (and word completion in general) may appear to behave improperly if there is a colon in the word to be completed. The colon is special to readline's word completion code: it is one of the characters that breaks words for the completer. Readline uses these characters in sort of the same way that bash uses $IFS: they break or separate the words the completion code hands to the application-specific or default word completion functions. The original intent was to make it easy to edit colon-separated lists (such as $PATH in bash) in various applications using readline for input. This is complicated by the fact that some versions of the popular `bash-completion' programmable completion package have problems with the default completion behavior in the presence of colons. The current set of completion word break characters is available in bash as the value of the COMP_WORDBREAKS variable. Removing `:' from that value is enough to make the colon not special to completion: COMP_WORDBREAKS=${COMP_WORDBREAKS//:} You can also quote the colon with a backslash to achieve the same result temporarily. E14) Why does quoting the pattern argument to the regular expression matching conditional operator (=~) cause regexp matching to stop working? In versions of bash prior to bash-3.2, the effect of quoting the regular expression argument to the [[ command's =~ operator was not specified. The practical effect was that double-quoting the pattern argument required backslashes to quote special pattern characters, which interfered with the backslash processing performed by double-quoted word expansion and was inconsistent with how the == shell pattern matching operator treated quoted characters. In bash-3.2, the shell was changed to internally quote characters in single- and double-quoted string arguments to the =~ operator, which suppresses the special meaning of the characters special to regular expression processing (`.', `[', `\', `(', `), `*', `+', `?', `{', `|', `^', and `$') and forces them to be matched literally. This is consistent with how the `==' pattern matching operator treats quoted portions of its pattern argument. Since the treatment of quoted string arguments was changed, several issues have arisen, chief among them the problem of white space in pattern arguments and the differing treatment of quoted strings between bash-3.1 and bash-3.2. Both problems may be solved by using a shell variable to hold the pattern. Since word splitting is not performed when expanding shell variables in all operands of the [[ command, this allows users to quote patterns as they wish when assigning the variable, then expand the values to a single string that may contain whitespace. The first problem may be solved by using backslashes or any other quoting mechanism to escape the white space in the patterns. Bash-4.0 introduces the concept of a `compatibility level', controlled by several options to the `shopt' builtin. If the `compat31' option is enabled, bash reverts to the bash-3.1 behavior with respect to quoting the rhs of the =~ operator. E15) Tell me more about the shell compatibility level. Bash-4.0 introduced the concept of a `shell compatibility level', specified as a set of options to the shopt builtin (compat31, compat32, compat40 at this writing). There is only one current compatibility level -- each option is mutually exclusive. This list does not mention behavior that is standard for a particular version (e.g., setting compat32 means that quoting the rhs of the regexp matching operator quotes special regexp characters in the word, which is default behavior in bash-3.2 and above). compat31 set - the < and > operators to the [[ command do not consider the current locale when comparing strings - quoting the rhs of the regexp matching operator (=~) has no special effect compat32 set - the < and > operators to the [[ command do not consider the current locale when comparing strings compat40 set - the < and > operators to the [[ command do not consider the current locale when comparing strings - interrupting a command list such as "a ; b ; c" causes the execution of the entire list to be aborted (in versions before bash-4.0, interrupting one command in a list caused the next to be executed) Section F: Things to watch out for on certain Unix versions F1) Why can't I use command line editing in my `cmdtool'? The problem is `cmdtool' and bash fighting over the input. When scrolling is enabled in a cmdtool window, cmdtool puts the tty in `raw mode' to permit command-line editing using the mouse for applications that cannot do it themselves. As a result, bash and cmdtool each try to read keyboard input immediately, with neither getting enough of it to be useful. This mode also causes cmdtool to not implement many of the terminal functions and control sequences appearing in the `sun-cmd' termcap entry. For a more complete explanation, see that file examples/suncmd.termcap in the bash distribution. `xterm' is a better choice, and gets along with bash much more smoothly. If you must use cmdtool, you can use the termcap description in examples/suncmd.termcap. Set the TERMCAP variable to the terminal description contained in that file, i.e. TERMCAP='Mu|sun-cmd:am:bs:km:pt:li#34:co#80:cl=^L:ce=\E[K:cd=\E[J:rs=\E[s:' Then export TERMCAP and start a new cmdtool window from that shell. The bash command-line editing should behave better in the new cmdtool. If this works, you can put the assignment to TERMCAP in your bashrc file. F2) I built bash on Solaris 2. Why do globbing expansions and filename completion chop off the first few characters of each filename? This is the consequence of building bash on SunOS 5 and linking with the libraries in /usr/ucblib, but using the definitions and structures from files in /usr/include. The actual conflict is between the dirent structure in /usr/include/dirent.h and the struct returned by the version of `readdir' in libucb.a (a 4.3-BSD style `struct direct'). Make sure you've got /usr/ccs/bin ahead of /usr/ucb in your $PATH when configuring and building bash. This will ensure that you use /usr/ccs/bin/cc or acc instead of /usr/ucb/cc and that you link with libc before libucb. If you have installed the Sun C compiler, you may also need to put /usr/ccs/bin and /opt/SUNWspro/bin into your $PATH before /usr/ucb. F3) Why does bash dump core after I interrupt username completion or `~user' tilde expansion on a machine running NIS? This is a famous and long-standing bug in the SunOS YP (sorry, NIS) client library, which is part of libc. The YP library code keeps static state -- a pointer into the data returned from the server. When YP initializes itself (setpwent), it looks at this pointer and calls free on it if it's non-null. So far, so good. If one of the YP functions is interrupted during getpwent (the exact function is interpretwithsave()), and returns NULL, the pointer is freed without being reset to NULL, and the function returns. The next time getpwent is called, it sees that this pointer is non-null, calls free, and the bash free() blows up because it's being asked to free freed memory. The traditional Unix mallocs allow memory to be freed multiple times; that's probably why this has never been fixed. You can run configure with the `--without-gnu-malloc' option to use the C library malloc and avoid the problem. F4) I'm running SVR4.2. Why is the line erased every time I type `@'? The `@' character is the default `line kill' character in most versions of System V, including SVR4.2. You can change this character to whatever you want using `stty'. For example, to change the line kill character to control-u, type stty kill ^U where the `^' and `U' can be two separate characters. F5) Why does bash report syntax errors when my C News scripts use a redirection before a subshell command? The actual command in question is something like < file ( command ) According to the grammar given in the POSIX.2 standard, this construct is, in fact, a syntax error. Redirections may only precede `simple commands'. A subshell construct such as the above is one of the shell's `compound commands'. A redirection may only follow a compound command. This affects the mechanical transformation of commands that use `cat' to pipe a file into a command (a favorite Useless-Use-Of-Cat topic on comp.unix.shell). While most commands of the form cat file | command can be converted to `< file command', shell control structures such as loops and subshells require `command < file'. The file CWRU/sh-redir-hack in the bash distribution is an (unofficial) patch to parse.y that will modify the grammar to support this construct. It will not apply with `patch'; you must modify parse.y by hand. Note that if you apply this, you must recompile with -DREDIRECTION_HACK. This introduces a large number of reduce/reduce conflicts into the shell grammar. F6) Why can't I use vi-mode editing on Red Hat Linux 6.1? The short answer is that Red Hat screwed up. The long answer is that they shipped an /etc/inputrc that only works for emacs mode editing, and then screwed all the vi users by setting INPUTRC to /etc/inputrc in /etc/profile. The short fix is to do one of the following: remove or rename /etc/inputrc, set INPUTRC=~/.inputrc in ~/.bashrc (or .bash_profile, but make sure you export it if you do), remove the assignment to INPUTRC from /etc/profile, add set keymap emacs to the beginning of /etc/inputrc, or bracket the key bindings in /etc/inputrc with these lines $if mode=emacs [...] $endif F7) Why do bash-2.05a and bash-2.05b fail to compile `printf.def' on HP/UX 11.x? HP/UX's support for long double is imperfect at best. GCC will support it without problems, but the HP C library functions like strtold(3) and printf(3) don't actually work with long doubles. HP implemented a `long_double' type as a 4-element array of 32-bit ints, and that is what the library functions use. The ANSI C `long double' type is a 128-bit floating point scalar. The easiest fix, until HP fixes things up, is to edit the generated config.h and #undef the HAVE_LONG_DOUBLE line. After doing that, the compilation should complete successfully. Section G: How can I get bash to do certain common things? G1) How can I get bash to read and display eight-bit characters? This is a process requiring several steps. First, you must ensure that the `physical' data path is a full eight bits. For xterms, for example, the `vt100' resources `eightBitInput' and `eightBitOutput' should be set to `true'. Once you have set up an eight-bit path, you must tell the kernel and tty driver to leave the eighth bit of characters alone when processing keyboard input. Use `stty' to do this: stty cs8 -istrip -parenb For old BSD-style systems, you can use stty pass8 You may also need stty even odd Finally, you need to tell readline that you will be inputting and displaying eight-bit characters. You use readline variables to do this. These variables can be set in your .inputrc or using the bash `bind' builtin. Here's an example using `bind': bash$ bind 'set convert-meta off' bash$ bind 'set meta-flag on' bash$ bind 'set output-meta on' The `set' commands between the single quotes may also be placed in ~/.inputrc. The script examples/scripts.noah/meta.bash encapsulates the bind commands in a shell function. G2) How do I write a function `x' to replace builtin command `x', but still invoke the command from within the function? This is why the `command' and `builtin' builtins exist. The `command' builtin executes the command supplied as its first argument, skipping over any function defined with that name. The `builtin' builtin executes the builtin command given as its first argument directly. For example, to write a function to replace `cd' that writes the hostname and current directory to an xterm title bar, use something like the following: cd() { builtin cd "$@" && xtitle "$HOST: $PWD" } This could also be written using `command' instead of `builtin'; the version above is marginally more efficient. G3) How can I find the value of a shell variable whose name is the value of another shell variable? Versions of Bash newer than Bash-2.0 support this directly. You can use ${!var} For example, the following sequence of commands will echo `z': var1=var2 var2=z echo ${!var1} For sh compatibility, use the `eval' builtin. The important thing to remember is that `eval' expands the arguments you give it again, so you need to quote the parts of the arguments that you want `eval' to act on. For example, this expression prints the value of the last positional parameter: eval echo \"\$\{$#\}\" The expansion of the quoted portions of this expression will be deferred until `eval' runs, while the `$#' will be expanded before `eval' is executed. In versions of bash later than bash-2.0, echo ${!#} does the same thing. This is not the same thing as ksh93 `nameref' variables, though the syntax is similar. I may add namerefs in a future bash version. G4) How can I make the bash `time' reserved word print timing output that looks like the output from my system's /usr/bin/time? The bash command timing code looks for a variable `TIMEFORMAT' and uses its value as a format string to decide how to display the timing statistics. The value of TIMEFORMAT is a string with `%' escapes expanded in a fashion similar in spirit to printf(3). The manual page explains the meanings of the escape sequences in the format string. If TIMEFORMAT is not set, bash acts as if the following assignment had been performed: TIMEFORMAT=$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS' The POSIX.2 default time format (used by `time -p command') is TIMEFORMAT=$'real %2R\nuser %2U\nsys %2S' The BSD /usr/bin/time format can be emulated with: TIMEFORMAT=$'\t%1R real\t%1U user\t%1S sys' The System V /usr/bin/time format can be emulated with: TIMEFORMAT=$'\nreal\t%1R\nuser\t%1U\nsys\t%1S' The ksh format can be emulated with: TIMEFORMAT=$'\nreal\t%2lR\nuser\t%2lU\nsys\t%2lS' G5) How do I get the current directory into my prompt? Bash provides a number of backslash-escape sequences which are expanded when the prompt string (PS1 or PS2) is displayed. The full list is in the manual page. The \w expansion gives the full pathname of the current directory, with a tilde (`~') substituted for the current value of $HOME. The \W expansion gives the basename of the current directory. To put the full pathname of the current directory into the path without any tilde subsitution, use $PWD. Here are some examples: PS1='\w$ ' # current directory with tilde PS1='\W$ ' # basename of current directory PS1='$PWD$ ' # full pathname of current directory The single quotes are important in the final example to prevent $PWD from being expanded when the assignment to PS1 is performed. G6) How can I rename "*.foo" to "*.bar"? Use the pattern removal functionality described in D3. The following `for' loop will do the trick: for f in *.foo; do mv $f ${f%foo}bar done G7) How can I translate a filename from uppercase to lowercase? The script examples/functions/lowercase, originally written by John DuBois, will do the trick. The converse is left as an exercise. G8) How can I write a filename expansion (globbing) pattern that will match all files in the current directory except "." and ".."? You must have set the `extglob' shell option using `shopt -s extglob' to use this: echo .!(.|) * A solution that works without extended globbing is given in the Unix Shell FAQ, posted periodically to comp.unix.shell. It's a variant of echo .[!.]* ..?* * (The ..?* catches files with names of three or more characters beginning with `..') Section H: Where do I go from here? H1) How do I report bugs in bash, and where should I look for fixes and advice? Use the `bashbug' script to report bugs. It is built and installed at the same time as bash. It provides a standard template for reporting a problem and automatically includes information about your configuration and build environment. `bashbug' sends its reports to bug-bash@gnu.org, which is a large mailing list gatewayed to the usenet newsgroup gnu.bash.bug. Bug fixes, answers to questions, and announcements of new releases are all posted to gnu.bash.bug. Discussions concerning bash features and problems also take place there. To reach the bash maintainers directly, send mail to bash-maintainers@gnu.org. H2) What kind of bash documentation is there? First, look in the doc directory in the bash distribution. It should contain at least the following files: bash.1 an extensive, thorough Unix-style manual page builtins.1 a manual page covering just bash builtin commands bashref.texi a reference manual in GNU tex`info format bashref.info an info version of the reference manual FAQ this file article.ms text of an article written for The Linux Journal readline.3 a man page describing readline Postscript, HTML, and ASCII files created from the above source are available in the documentation distribution. There is additional documentation available for anonymous FTP from host ftp.cwru.edu in the `pub/bash' directory. Cameron Newham and Bill Rosenblatt have written a book on bash, published by O'Reilly and Associates. The book is based on Bill Rosenblatt's Korn Shell book. The title is ``Learning the Bash Shell'', and the ISBN number of the third edition, published in March, 2005, is 0-596-00965-8. Look for it in fine bookstores near you. This edition of the book has been updated to cover bash-3.0. The GNU Bash Reference Manual has been published as a printed book by Network Theory Ltd (Paperback, ISBN: 0-9541617-7-7, Nov. 2006). It covers bash-3.2 and is available from most online bookstores (see http://www.network-theory.co.uk/bash/manual/ for details). The publisher will donate $1 to the Free Software Foundation for each copy sold. Arnold Robbins and Nelson Beebe have written ``Classic Shell Scripting'', published by O'Reilly. The first edition, with ISBN number 0-596-00595-4, was published in May, 2005. Chris F. A. Johnson, a frequent contributor to comp.unix.shell and gnu.bash.bug, has written ``Shell Scripting Recipes: A Problem-Solution Approach,'' a new book on shell scripting, concentrating on features of the POSIX standard helpful to shell script writers. The first edition from Apress, with ISBN number 1-59059-471-1, was published in May, 2005. H3) What's coming in future versions? These are features I hope to include in a future version of bash. Rocky Bernstein's bash debugger (support is included with bash-4.0) H4) What's on the bash `wish list' for future versions? These are features that may or may not appear in a future version of bash. breaking some of the shell functionality into embeddable libraries a module system like zsh's, using dynamic loading like builtins a bash programmer's guide with a chapter on creating loadable builtins a better loadable interface to perl with access to the shell builtins and variables (contributions gratefully accepted) ksh93-like `nameref' variables ksh93-like `xx.yy' variables (including some of the .sh.* variables) and associated disipline functions Some of the new ksh93 pattern matching operators, like backreferencing H5) When will the next release appear? The next version will appear sometime in 2010. Never make predictions. This document is Copyright 1995-2010 by Chester Ramey. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, and distribute this document for any purpose, provided that the above copyright notice appears in all copies of this document and that the contents of this document remain unaltered.