| Current Path : /compat/linux/proc/self/root/usr/src/bin/pax/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //compat/linux/proc/self/root/usr/src/bin/pax/pax.c |
/*-
* Copyright (c) 1992 Keith Muller.
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Keith Muller of the University of California, San Diego.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#if 0
#ifndef lint
static char const copyright[] =
"@(#) Copyright (c) 1992, 1993\n\
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
static char sccsid[] = "@(#)pax.c 8.2 (Berkeley) 4/18/94";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/bin/pax/pax.c 222177 2011-05-22 14:03:38Z uqs $");
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <locale.h>
#include <paths.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "pax.h"
#include "extern.h"
static int gen_init(void);
/*
* PAX main routines, general globals and some simple start up routines
*/
/*
* Variables that can be accessed by any routine within pax
*/
int act = DEFOP; /* read/write/append/copy */
FSUB *frmt = NULL; /* archive format type */
int cflag; /* match all EXCEPT pattern/file */
int cwdfd; /* starting cwd */
int dflag; /* directory member match only */
int iflag; /* interactive file/archive rename */
int kflag; /* do not overwrite existing files */
int lflag; /* use hard links when possible */
int nflag; /* select first archive member match */
int tflag; /* restore access time after read */
int uflag; /* ignore older modification time files */
int vflag; /* produce verbose output */
int Dflag; /* same as uflag except inode change time */
int Hflag; /* follow command line symlinks (write only) */
int Lflag; /* follow symlinks when writing */
int Xflag; /* archive files with same device id only */
int Yflag; /* same as Dflg except after name mode */
int Zflag; /* same as uflg except after name mode */
int vfpart; /* is partial verbose output in progress */
int patime = 1; /* preserve file access time */
int pmtime = 1; /* preserve file modification times */
int nodirs; /* do not create directories as needed */
int pmode; /* preserve file mode bits */
int pids; /* preserve file uid/gid */
int rmleadslash = 0; /* remove leading '/' from pathnames */
int exit_val; /* exit value */
int docrc; /* check/create file crc */
char *dirptr; /* destination dir in a copy */
const char *argv0; /* root of argv[0] */
sigset_t s_mask; /* signal mask for cleanup critical sect */
FILE *listf; /* file pointer to print file list to */
char *tempfile; /* tempfile to use for mkstemp(3) */
char *tempbase; /* basename of tempfile to use for mkstemp(3) */
/*
* PAX - Portable Archive Interchange
*
* A utility to read, write, and write lists of the members of archive
* files and copy directory hierarchies. A variety of archive formats
* are supported (some are described in POSIX 1003.1 10.1):
*
* ustar - 10.1.1 extended tar interchange format
* cpio - 10.1.2 extended cpio interchange format
* tar - old BSD 4.3 tar format
* binary cpio - old cpio with binary header format
* sysVR4 cpio - with and without CRC
*
* This version is a superset of IEEE Std 1003.2b-d3
*
* Summary of Extensions to the IEEE Standard:
*
* 1 READ ENHANCEMENTS
* 1.1 Operations which read archives will continue to operate even when
* processing archives which may be damaged, truncated, or fail to meet
* format specs in several different ways. Damaged sections of archives
* are detected and avoided if possible. Attempts will be made to resync
* archive read operations even with badly damaged media.
* 1.2 Blocksize requirements are not strictly enforced on archive read.
* Tapes which have variable sized records can be read without errors.
* 1.3 The user can specify via the non-standard option flag -E if error
* resync operation should stop on a media error, try a specified number
* of times to correct, or try to correct forever.
* 1.4 Sparse files (lseek holes) stored on the archive (but stored with blocks
* of all zeros will be restored with holes appropriate for the target
* file system
* 1.5 The user is notified whenever something is found during archive
* read operations which violates spec (but the read will continue).
* 1.6 Multiple archive volumes can be read and may span over different
* archive devices
* 1.7 Rigidly restores all file attributes exactly as they are stored on the
* archive.
* 1.8 Modification change time ranges can be specified via multiple -T
* options. These allow a user to select files whose modification time
* lies within a specific time range.
* 1.9 Files can be selected based on owner (user name or uid) via one or more
* -U options.
* 1.10 Files can be selected based on group (group name or gid) via one o
* more -G options.
* 1.11 File modification time can be checked against existing file after
* name modification (-Z)
*
* 2 WRITE ENHANCEMENTS
* 2.1 Write operation will stop instead of allowing a user to create a flawed
* flawed archive (due to any problem).
* 2.2 Archives written by pax are forced to strictly conform to both the
* archive and pax the specific format specifications.
* 2.3 Blocking size and format is rigidly enforced on writes.
* 2.4 Formats which may exhibit header overflow problems (they have fields
* too small for large file systems, such as inode number storage), use
* routines designed to repair this problem. These techniques still
* conform to both pax and format specifications, but no longer truncate
* these fields. This removes any restrictions on using these archive
* formats on large file systems.
* 2.5 Multiple archive volumes can be written and may span over different
* archive devices
* 2.6 A archive volume record limit allows the user to specify the number
* of bytes stored on an archive volume. When reached the user is
* prompted for the next archive volume. This is specified with the
* non-standard -B flag. The limit is rounded up to the next blocksize.
* 2.7 All archive padding during write use zero filled sections. This makes
* it much easier to pull data out of flawed archive during read
* operations.
* 2.8 Access time reset with the -t applies to all file nodes (including
* directories).
* 2.9 Symbolic links can be followed with -L (optional in the spec).
* 2.10 Modification or inode change time ranges can be specified via
* multiple -T options. These allow a user to select files whose
* modification or inode change time lies within a specific time range.
* 2.11 Files can be selected based on owner (user name or uid) via one or more
* -U options.
* 2.12 Files can be selected based on group (group name or gid) via one o
* more -G options.
* 2.13 Symlinks which appear on the command line can be followed (without
* following other symlinks; -H flag)
*
* 3 COPY ENHANCEMENTS
* 3.1 Sparse files (lseek holes) can be copied without expanding the holes
* into zero filled blocks. The file copy is created with holes which are
* appropriate for the target file system
* 3.2 Access time as well as modification time on copied file trees can be
* preserved with the appropriate -p options.
* 3.3 Access time reset with the -t applies to all file nodes (including
* directories).
* 3.4 Symbolic links can be followed with -L (optional in the spec).
* 3.5 Modification or inode change time ranges can be specified via
* multiple -T options. These allow a user to select files whose
* modification or inode change time lies within a specific time range.
* 3.6 Files can be selected based on owner (user name or uid) via one or more
* -U options.
* 3.7 Files can be selected based on group (group name or gid) via one o
* more -G options.
* 3.8 Symlinks which appear on the command line can be followed (without
* following other symlinks; -H flag)
* 3.9 File inode change time can be checked against existing file before
* name modification (-D)
* 3.10 File inode change time can be checked against existing file after
* name modification (-Y)
* 3.11 File modification time can be checked against existing file after
* name modification (-Z)
*
* 4 GENERAL ENHANCEMENTS
* 4.1 Internal structure is designed to isolate format dependent and
* independent functions. Formats are selected via a format driver table.
* This encourages the addition of new archive formats by only having to
* write those routines which id, read and write the archive header.
*/
/*
* main()
* parse options, set up and operate as specified by the user.
* any operational flaw will set exit_val to non-zero
* Return: 0 if ok, 1 otherwise
*/
int
main(int argc, char *argv[])
{
const char *tmpdir;
size_t tdlen;
(void) setlocale(LC_ALL, "");
listf = stderr;
/*
* Keep a reference to cwd, so we can always come back home.
*/
cwdfd = open(".", O_RDONLY);
if (cwdfd < 0) {
syswarn(0, errno, "Can't open current working directory.");
return(exit_val);
}
/*
* Where should we put temporary files?
*/
if ((tmpdir = getenv("TMPDIR")) == NULL || *tmpdir == '\0')
tmpdir = _PATH_TMP;
tdlen = strlen(tmpdir);
while(tdlen > 0 && tmpdir[tdlen - 1] == '/')
tdlen--;
tempfile = malloc(tdlen + 1 + sizeof(_TFILE_BASE));
if (tempfile == NULL) {
paxwarn(1, "Cannot allocate memory for temp file name.");
return(exit_val);
}
if (tdlen)
memcpy(tempfile, tmpdir, tdlen);
tempbase = tempfile + tdlen;
*tempbase++ = '/';
/*
* parse options, determine operational mode, general init
*/
options(argc, argv);
if ((gen_init() < 0) || (tty_init() < 0))
return(exit_val);
/*
* select a primary operation mode
*/
switch(act) {
case EXTRACT:
extract();
break;
case ARCHIVE:
archive();
break;
case APPND:
if (gzip_program != NULL)
err(1, "can not gzip while appending");
append();
break;
case COPY:
copy();
break;
default:
case LIST:
list();
break;
}
return(exit_val);
}
/*
* sig_cleanup()
* when interrupted we try to do whatever delayed processing we can.
* This is not critical, but we really ought to limit our damage when we
* are aborted by the user.
* Return:
* never....
*/
void
sig_cleanup(int which_sig)
{
/*
* restore modes and times for any dirs we may have created
* or any dirs we may have read. Set vflag and vfpart so the user
* will clearly see the message on a line by itself.
*/
vflag = vfpart = 1;
if (which_sig == SIGXCPU)
paxwarn(0, "Cpu time limit reached, cleaning up.");
else
paxwarn(0, "Signal caught, cleaning up.");
ar_close();
proc_dir();
if (tflag)
atdir_end();
exit(1);
}
/*
* gen_init()
* general setup routines. Not all are required, but they really help
* when dealing with a medium to large sized archives.
*/
static int
gen_init(void)
{
struct rlimit reslimit;
struct sigaction n_hand;
struct sigaction o_hand;
/*
* Really needed to handle large archives. We can run out of memory for
* internal tables really fast when we have a whole lot of files...
*/
if (getrlimit(RLIMIT_DATA , &reslimit) == 0){
reslimit.rlim_cur = reslimit.rlim_max;
(void)setrlimit(RLIMIT_DATA , &reslimit);
}
/*
* should file size limits be waived? if the os limits us, this is
* needed if we want to write a large archive
*/
if (getrlimit(RLIMIT_FSIZE , &reslimit) == 0){
reslimit.rlim_cur = reslimit.rlim_max;
(void)setrlimit(RLIMIT_FSIZE , &reslimit);
}
/*
* increase the size the stack can grow to
*/
if (getrlimit(RLIMIT_STACK , &reslimit) == 0){
reslimit.rlim_cur = reslimit.rlim_max;
(void)setrlimit(RLIMIT_STACK , &reslimit);
}
/*
* not really needed, but doesn't hurt
*/
if (getrlimit(RLIMIT_RSS , &reslimit) == 0){
reslimit.rlim_cur = reslimit.rlim_max;
(void)setrlimit(RLIMIT_RSS , &reslimit);
}
/*
* signal handling to reset stored directory times and modes. Since
* we deal with broken pipes via failed writes we ignore it. We also
* deal with any file size limit thorough failed writes. Cpu time
* limits are caught and a cleanup is forced.
*/
if ((sigemptyset(&s_mask) < 0) || (sigaddset(&s_mask, SIGTERM) < 0) ||
(sigaddset(&s_mask,SIGINT) < 0)||(sigaddset(&s_mask,SIGHUP) < 0) ||
(sigaddset(&s_mask,SIGPIPE) < 0)||(sigaddset(&s_mask,SIGQUIT)<0) ||
(sigaddset(&s_mask,SIGXCPU) < 0)||(sigaddset(&s_mask,SIGXFSZ)<0)) {
paxwarn(1, "Unable to set up signal mask");
return(-1);
}
memset(&n_hand, 0, sizeof n_hand);
n_hand.sa_mask = s_mask;
n_hand.sa_flags = 0;
n_hand.sa_handler = sig_cleanup;
if ((sigaction(SIGHUP, &n_hand, &o_hand) < 0) &&
(o_hand.sa_handler == SIG_IGN) &&
(sigaction(SIGHUP, &o_hand, &o_hand) < 0))
goto out;
if ((sigaction(SIGTERM, &n_hand, &o_hand) < 0) &&
(o_hand.sa_handler == SIG_IGN) &&
(sigaction(SIGTERM, &o_hand, &o_hand) < 0))
goto out;
if ((sigaction(SIGINT, &n_hand, &o_hand) < 0) &&
(o_hand.sa_handler == SIG_IGN) &&
(sigaction(SIGINT, &o_hand, &o_hand) < 0))
goto out;
if ((sigaction(SIGQUIT, &n_hand, &o_hand) < 0) &&
(o_hand.sa_handler == SIG_IGN) &&
(sigaction(SIGQUIT, &o_hand, &o_hand) < 0))
goto out;
if ((sigaction(SIGXCPU, &n_hand, &o_hand) < 0) &&
(o_hand.sa_handler == SIG_IGN) &&
(sigaction(SIGXCPU, &o_hand, &o_hand) < 0))
goto out;
n_hand.sa_handler = SIG_IGN;
if ((sigaction(SIGPIPE, &n_hand, &o_hand) < 0) ||
(sigaction(SIGXFSZ, &n_hand, &o_hand) < 0))
goto out;
return(0);
out:
syswarn(1, errno, "Unable to set up signal handler");
return(-1);
}