config root man

#!/bin/sh
#-
# Copyright (c) 2010 iXsystems, Inc.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD: release/9.1.0/usr.sbin/pc-sysinstall/backend/functions-extractimage.sh 225657 2011-09-19 05:12:53Z jpaetzel $

# Functions which perform the extraction / installation of system to disk

. ${BACKEND}/functions-mountoptical.sh

# Performs the extraction of data to disk from a uzip or tar archive
start_extract_uzip_tar()
{
  if [ -z "$INSFILE" ]
  then
    exit_err "ERROR: Called extraction with no install file set!"
  fi

  # Check if we have a .count file, and echo it out for a front-end to use in progress bars
  if [ -e "${INSFILE}.count" ]
  then
    echo "INSTALLCOUNT: `cat ${INSFILE}.count`"
  fi

  # Check if we are doing an upgrade, and if so use our exclude list
  if [ "${INSTALLMODE}" = "upgrade" ]
  then
   TAROPTS="-X ${PROGDIR}/conf/exclude-from-upgrade"
  else
   TAROPTS=""
  fi

  echo_log "pc-sysinstall: Starting Extraction"

  case ${PACKAGETYPE} in
    uzip)
      if ! kldstat -v | grep -q "geom_uzip" ; then
	exit_err "Kernel module geom_uzip not loaded"
      fi

	  # Start by mounting the uzip image
      MDDEVICE=`mdconfig -a -t vnode -o readonly -f ${INSFILE}`
      mkdir -p ${FSMNT}.uzip
      mount -r /dev/${MDDEVICE}.uzip ${FSMNT}.uzip
      if [ $? -ne 0 ]
      then
        exit_err "ERROR: Failed mounting the ${INSFILE}"
      fi
      cd ${FSMNT}.uzip

      # Copy over all the files now!
      tar cvf - . 2>/dev/null | tar -xpv -C ${FSMNT} ${TAROPTS} -f - 2>&1 | tee -a ${FSMNT}/.tar-extract.log
      if [ $? -ne 0 ]
      then
        cd /
        echo "TAR failure occurred:" >>${LOGOUT}
        cat ${FSMNT}/.tar-extract.log | grep "tar:" >>${LOGOUT}
        umount ${FSMNT}.uzip
        mdconfig -d -u ${MDDEVICE}
        exit_err "ERROR: Failed extracting the tar image"
      fi

      # All finished, now lets umount and cleanup
      cd /
      umount ${FSMNT}.uzip
      mdconfig -d -u ${MDDEVICE}
       ;;
    tar)
	  tar -xpv -C ${FSMNT} -f ${INSFILE} ${TAROPTS} >&1 2>&1
      if [ $? -ne 0 ]
      then
        exit_err "ERROR: Failed extracting the tar image"
      fi
      ;;
  esac

  # Check if this was a FTP download and clean it up now
  if [ "${INSTALLMEDIUM}" = "ftp" ]
  then
    echo_log "Cleaning up downloaded archive"
    rm ${INSFILE} 
    rm ${INSFILE}.count >/dev/null 2>/dev/null 
    rm ${INSFILE}.md5 >/dev/null 2>/dev/null
  fi

  echo_log "pc-sysinstall: Extraction Finished"

};

# Performs the extraction of data to disk from a directory with split files
start_extract_split()
{
  if [ -z "${INSDIR}" ]
  then
    exit_err "ERROR: Called extraction with no install directory set!"
  fi

  echo_log "pc-sysinstall: Starting Extraction"

  # Used by install.sh
  DESTDIR="${FSMNT}"
  export DESTDIR

  HERE=`pwd`
  DIRS=`ls -d ${INSDIR}/*|grep -Ev '(uzip|kernels|src)'`
  for dir in ${DIRS}
  do
    cd "${dir}"
    if [ -f "install.sh" ]
    then
      echo_log "Extracting" `basename ${dir}`
      echo "y" | sh install.sh >/dev/null
      if [ $? -ne 0 ]
      then
        exit_err "ERROR: Failed extracting ${dir}"
      fi
    else
      exit_err "ERROR: ${dir}/install.sh does not exist"
    fi
  done
  cd "${HERE}"
  
  KERNELS=`ls -d ${INSDIR}/*|grep kernels`
  cd "${KERNELS}"
  if [ -f "install.sh" ]
  then
    echo_log "Extracting" `basename ${KERNELS}`
    echo "y" | sh install.sh generic >/dev/null
    if [ $? -ne 0 ]
    then
      exit_err "ERROR: Failed extracting ${KERNELS}"
    fi
    rm -rf "${FSMNT}/boot/kernel"
    mv "${FSMNT}/boot/GENERIC" "${FSMNT}/boot/kernel"
  else
    exit_err "ERROR: ${KERNELS}/install.sh does not exist"
  fi
  cd "${HERE}"

  SOURCE=`ls -d ${INSDIR}/*|grep src`
  cd "${SOURCE}"
  if [ -f "install.sh" ]
  then
    echo_log "Extracting" `basename ${SOURCE}`
    echo "y" | sh install.sh all >/dev/null
    if [ $? -ne 0 ]
    then
      exit_err "ERROR: Failed extracting ${SOURCE}"
    fi
  else
    exit_err "ERROR: ${SOURCE}/install.sh does not exist"
  fi
  cd "${HERE}"

  echo_log "pc-sysinstall: Extraction Finished"
};

# Function which will attempt to fetch the install file before we start
# the install
fetch_install_file()
{
  get_value_from_cfg ftpPath
  if [ -z "$VAL" ]
  then
    exit_err "ERROR: Install medium was set to ftp, but no ftpPath was provided!" 
  fi

  FTPPATH="${VAL}"
  
  # Check if we have a /usr partition to save the download
  if [ -d "${FSMNT}/usr" ]
  then
    OUTFILE="${FSMNT}/usr/.fetch-${INSFILE}"
  else
    OUTFILE="${FSMNT}/.fetch-${INSFILE}"
  fi

  # Do the fetch of the archive now
  fetch_file "${FTPPATH}/${INSFILE}" "${OUTFILE}" "1"

  # Check to see if there is a .count file for this install
  fetch_file "${FTPPATH}/${INSFILE}.count" "${OUTFILE}.count" "0"

  # Check to see if there is a .md5 file for this install
  fetch_file "${FTPPATH}/${INSFILE}.md5" "${OUTFILE}.md5" "0"

  # Done fetching, now reset the INSFILE to our downloaded archived
  export INSFILE="${OUTFILE}"

};

# Function which will download freebsd install files
fetch_split_files()
{
  get_ftpHost
  if [ -z "$VAL" ]
  then
    exit_err "ERROR: Install medium was set to ftp, but no ftpHost was provided!" 
  fi
  FTPHOST="${VAL}"

  get_ftpDir
  if [ -z "$VAL" ]
  then
    exit_err "ERROR: Install medium was set to ftp, but no ftpDir was provided!" 
  fi
  FTPDIR="${VAL}"

  # Check if we have a /usr partition to save the download
  if [ -d "${FSMNT}/usr" ]
  then
    OUTFILE="${FSMNT}/usr/.fetch-${INSFILE}"
  else
    OUTFILE="${FSMNT}/.fetch-${INSFILE}"
  fi

  DIRS="base catpages dict doc games info manpages proflibs kernels src"
  if [ "${FBSD_ARCH}" = "amd64" ]
  then
    DIRS="${DIRS} lib32"
  fi

  for d in ${DIRS}
  do
    mkdir -p "${OUTFILE}/${d}"
  done


  NETRC="${OUTFILE}/.netrc"
  cat <<EOF >"${NETRC}"
machine ${FTPHOST}
login anonymous
password anonymous
macdef INSTALL
bin
prompt
EOF

  for d in ${DIRS}
  do
    cat <<EOF >>"${NETRC}"
cd ${FTPDIR}/${d}
lcd ${OUTFILE}/${d}
mreget *
EOF
  done

  cat <<EOF >>"${NETRC}"
bye


EOF

  # Fetch the files via ftp
  echo "$ INSTALL" | ftp -N "${NETRC}" "${FTPHOST}"

  # Done fetching, now reset the INSFILE to our downloaded archived
  export INSFILE="${OUTFILE}"
}

# Function which does the rsync download from the server specified in cfg
start_rsync_copy()
{
  # Load our rsync config values
  get_value_from_cfg rsyncPath
  if [ -z "${VAL}" ]; then
    exit_err "ERROR: rsyncPath is unset! Please check your config and try again."
  fi
  export RSYNCPATH="${VAL}"

  get_value_from_cfg rsyncHost
  if [  -z "${VAL}" ]; then
    exit_err "ERROR: rsyncHost is unset! Please check your config and try again."
  fi
  export RSYNCHOST="${VAL}"

  get_value_from_cfg rsyncUser
  if [ -z "${VAL}" ]; then
    exit_err "ERROR: rsyncUser is unset! Please check your config and try again."
  fi
  export RSYNCUSER="${VAL}"

  get_value_from_cfg rsyncPort
  if [ -z "${VAL}" ]; then
    exit_err "ERROR: rsyncPort is unset! Please check your config and try again."
  fi
  export RSYNCPORT="${VAL}"

  COUNT=1
  while
  z=1
  do
    if [ ${COUNT} -gt ${RSYNCTRIES} ]
    then
     exit_err "ERROR: Failed rsync command!"
     break
    fi

    rsync -avvzHsR \
    --rsync-path="rsync --fake-super" \
    -e "ssh -p ${RSYNCPORT}" \
    ${RSYNCUSER}@${RSYNCHOST}:${RSYNCPATH}/./ ${FSMNT}
    if [ $? -ne 0 ]
    then
      echo "Rsync failed! Tries: ${COUNT}"
    else
      break
    fi

    COUNT=$((COUNT+1))
  done 

};

start_image_install()
{
  if [ -z "${IMAGE_FILE}" ]
  then
    exit_err "ERROR: installMedium set to image but no image file specified!"
  fi

  # We are ready to start mounting, lets read the config and do it
  while read line
  do
    echo $line | grep -q "^disk0=" 2>/dev/null
    if [ $? -eq 0 ]
    then
      # Found a disk= entry, lets get the disk we are working on
      get_value_from_string "${line}"
      strip_white_space "$VAL"
      DISK="$VAL"
    fi

    echo $line | grep -q "^commitDiskPart" 2>/dev/null
    if [ $? -eq 0 ]
    then
      # Found our flag to commit this disk setup / lets do sanity check and do it
      if [ -n "${DISK}" ]
      then

        # Write the image
        write_image "${IMAGE_FILE}" "${DISK}"

        # Increment our disk counter to look for next disk and unset
        unset DISK
        break

      else
        exit_err "ERROR: commitDiskPart was called without procceding disk<num>= and partition= entries!!!"
      fi
    fi

  done <${CFGF}
};

# Entrance function, which starts the installation process
init_extraction()
{
  # Figure out what file we are using to install from via the config
  get_value_from_cfg installFile

  if [ -n "${VAL}" ]
  then
    export INSFILE="${VAL}"
  else
    # If no installFile specified, try our defaults
    if [ "$INSTALLTYPE" = "FreeBSD" ]
    then
      case $PACKAGETYPE in
        uzip) INSFILE="${FBSD_UZIP_FILE}" ;;
        tar) INSFILE="${FBSD_TAR_FILE}" ;;
        split)
          INSDIR="${FBSD_BRANCH_DIR}"

          # This is to trick opt_mount into not failing
          INSFILE="${INSDIR}"
          ;;
      esac
    else
      case $PACKAGETYPE in
        uzip) INSFILE="${UZIP_FILE}" ;;
        tar) INSFILE="${TAR_FILE}" ;;
      esac
    fi
    export INSFILE
  fi

  # Lets start by figuring out what medium we are using
  case ${INSTALLMEDIUM} in
    dvd|usb)
      # Lets start by mounting the disk 
      opt_mount 
      if [ -n "${INSDIR}" ]
      then
        INSDIR="${CDMNT}/${INSDIR}" ; export INSDIR
	    start_extract_split

      else
        INSFILE="${CDMNT}/${INSFILE}" ; export INSFILE
        start_extract_uzip_tar
      fi
      ;;

    ftp)
      if [ "$PACKAGETYPE" = "split" ]
      then
        fetch_split_files

        INSDIR="${INSFILE}" ; export INSDIR
        start_extract_split
      else
        fetch_install_file
        start_extract_uzip_tar 
      fi
      ;;

    sftp) ;;

    rsync) start_rsync_copy ;;
    image) start_image_install ;;
    local)
      get_value_from_cfg localPath
      if [ -z "$VAL" ]
      then
        exit_err "Install medium was set to local, but no localPath was provided!"
      fi
      LOCALPATH=$VAL
      INSFILE="${LOCALPATH}/${INSFILE}" ; export INSFILE
      start_extract_uzip_tar
      ;;
    *) exit_err "ERROR: Unknown install medium" ;;
  esac

};