| Current Path : /home/usr.opt/mysql57/mysql-test/extra/rpl_tests/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //home/usr.opt/mysql57/mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test |
# ==== Purpose ====
#
# 1. Verify that DDL statements implicitly commit a transaction.
#
# 2. Verify that DDL statements are not written to the statement or
# transaction cache.
#
# ==== Implementation ====
#
# We check a number of different types of DDL statements.
#
# For each DDL statement, we proceed as follows.
#
# - Start a transaction and insert some values into a transactional table.
# - Execute the DDL statement.
# - Check in the binary log for a COMMIT mark which is supposed to be written
# before the DDL statement. This verifies (1).
# - Check in the binary log that the DDL is not wrapped in BEGIN...COMMIT.
# This verifies (2), since anything that goes through the statement
# cache or transaction cache is wrapped in BEGIN...COMMIT.
#
# ==== References ====
#
# WL#2687: Write non-transactional binlog events directly to binary log
# WL#5072: Write a Test Case for WL#2687
--source include/have_myisam.inc
--echo #########################################################################
--echo # CONFIGURATION
--echo #########################################################################
connection master;
eval CREATE TABLE tt_1 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = $engine;
eval CREATE TABLE tt_2 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = $engine;
eval CREATE TABLE nt_1 (ddl_case INT, PRIMARY KEY(ddl_case)) ENGINE = MyIsam;
INSERT INTO tt_1(ddl_case) VALUES(0);
INSERT INTO tt_2(ddl_case) VALUES(0);
--echo #########################################################################
--echo # CHECK IMPLICT COMMIT
--echo #########################################################################
SET AUTOCOMMIT= 0;
let $ddl_cases= 43;
while ($ddl_cases >= 1)
{
--echo -b-b-b-b-b-b-b-b-b-b-b- >> << -b-b-b-b-b-b-b-b-b-b-b-
let $in_temporary= no;
let $check_position_of_commit_event= yes;
#
# In SBR and MIXED modes, the commit event is usually the 4th event in the
# binary log:
#
# 1: GTID
# 2: BEGIN
# 3: INSERT
# 4: COMMIT
# 5: DDL EVENT which triggered the previous commmit.
#
if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
{
let $commit_event_row_number= 4;
}
#
# In RBR mode, the commit event is usually the 5th event in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: COMMIT
# 6: DDL EVENT which triggered the previous commmit.
#
if (`select @@binlog_format = 'ROW'`)
{
let $commit_event_row_number= 5;
}
#
# In NDB (RBR and MIXED modes), the commit event is usually the 9th event
# in the binary log:
#
# 1: GTID
# 2: COMMAND
# 3: GTID
# 4: BEGIN
# 5: TABLE MAP EVENT
# 6: TABLE MAP EVENT (ndb_apply_status)
# 7: ROW EVENT
# 8: ROW EVENT
# 9: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 9;
}
let $first_binlog_position= query_get_value("SHOW MASTER STATUS", Position, 1);
--enable_query_log
eval INSERT INTO tt_1(ddl_case) VALUES ($ddl_cases);
if ($ddl_cases == 43)
{
let $cmd= CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "$UDF_EXAMPLE_LIB";
}
if ($ddl_cases == 42)
{
let $cmd= DROP FUNCTION myfunc_int;
}
if ($ddl_cases == 41)
{
let $cmd= LOAD INDEX INTO CACHE nt_1 IGNORE LEAVES;
if ($engine == NDB)
{
# This seems to be related to epochs.
# We need to check this against an updated version or avoid it.
let $check_position_of_commit_event= no;
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 40)
{
let $cmd= LOAD INDEX INTO CACHE tt_1, tt_2 IGNORE LEAVES;
#
# In NDB (RBR and MIXED modes), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 39)
{
let $cmd= ANALYZE TABLE nt_1;
}
if ($ddl_cases == 38)
{
let $cmd= CHECK TABLE nt_1;
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 37)
{
let $cmd= OPTIMIZE TABLE nt_1;
}
if ($ddl_cases == 36)
{
let $cmd= REPAIR TABLE nt_1;
}
if ($ddl_cases == 35)
{
let $cmd= LOCK TABLES tt_1 WRITE;
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 34)
{
let $cmd= UNLOCK TABLES;
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 33)
{
let $cmd= CREATE USER 'user'@'localhost';
}
if ($ddl_cases == 32)
{
let $cmd= GRANT ALL ON *.* TO 'user'@'localhost';
}
if ($ddl_cases == 31)
{
let $cmd= SET PASSWORD FOR 'user'@'localhost' = 'newpass';
#
# In NDB (RBR mode), the commit event is the 14th event
# in the binary log:
#
# 1: GTID
# 2: DDL EVENT which triggered the previous commmit.
# 3: GTID
# 4: BEGIN
# 5: TABLE MAP EVENT
# 6: ROW EVENT
# 7: COMMIT
# 8: GTID
# 9: BEGIN
# 10: TABLE MAP EVENT
# 11: TABLE MAP EVENT (ndb_apply_status)
# 12: ROW EVENT
# 13: ROW EVENT
# 14: COMMIT
#
if (`SELECT '$engine' = 'NDB' && @@binlog_format = 'ROW'`)
{
let $commit_event_row_number= 14;
}
#
# In NDB (MIXED mode), the commit event is the 9th event
# in the binary log:
#
# 1: GTID
# 2: DDL EVENT which triggered the previous commmit.
# 3: GTID
# 4: BEGIN
# 5: TABLE MAP EVENT
# 6: TABLE MAP EVENT (ndb_apply_status)
# 7: ROW EVENT
# 8: ROW EVENT
# 9: COMMIT
#
if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'`)
{
let $commit_event_row_number= 9;
}
}
if ($ddl_cases == 30)
{
let $cmd= REVOKE ALL PRIVILEGES, GRANT OPTION FROM 'user'@'localhost';
}
if ($ddl_cases == 29)
{
let $cmd= RENAME USER 'user'@'localhost' TO 'user_new'@'localhost';
}
if ($ddl_cases == 28)
{
let $cmd= DROP USER 'user_new'@'localhost';
}
if ($ddl_cases == 27)
{
let $cmd= CREATE EVENT evt ON SCHEDULE AT CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO SELECT * FROM tt_1;
}
if ($ddl_cases == 26)
{
let $cmd= ALTER EVENT evt COMMENT 'evt';
}
if ($ddl_cases == 25)
{
let $cmd= DROP EVENT evt;
}
if ($ddl_cases == 24)
{
let $cmd= CREATE TRIGGER tr AFTER INSERT ON tt_1 FOR EACH ROW UPDATE tt_2 SET ddl_case = ddl_case WHERE ddl_case= NEW.ddl_case;
}
if ($ddl_cases == 23)
{
let $cmd= DROP TRIGGER tr;
#
# In RBR mode, due to the trigger the tt_2 is also updated:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT
# 5: ROW EVENT
# 6: COMMIT
# 7: GTID
# 8: DDL EVENT which triggered the previous commmit.
#
if (`select @@binlog_format = 'ROW' && '$engine' != 'NDB'`)
{
let $commit_event_row_number= 6;
}
}
if ($ddl_cases == 22)
{
let $cmd= CREATE FUNCTION fc () RETURNS VARCHAR(64) RETURN "fc";
}
if ($ddl_cases == 21)
{
let $cmd= ALTER FUNCTION fc COMMENT 'fc';
}
if ($ddl_cases == 20)
{
let $cmd= DROP FUNCTION fc;
}
if ($ddl_cases == 19)
{
let $cmd= CREATE PROCEDURE pc () UPDATE tt_2 SET ddl_case = ddl_case WHERE ddl_case= NEW.ddl_case;
}
if ($ddl_cases == 18)
{
let $cmd= ALTER PROCEDURE pc COMMENT 'pc';
}
if ($ddl_cases == 17)
{
let $cmd= DROP PROCEDURE pc;
}
if ($ddl_cases == 16)
{
let $cmd= CREATE VIEW v AS SELECT * FROM tt_1;
}
if ($ddl_cases == 15)
{
let $cmd= ALTER VIEW v AS SELECT * FROM tt_1;
}
if ($ddl_cases == 14)
{
let $cmd= DROP VIEW v;
}
if ($ddl_cases == 13)
{
let $cmd= CREATE INDEX ix ON tt_1(ddl_case);
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
# 8: GTID
# 9: DDL EVENT which triggered the previous commmit.
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 12)
{
let $cmd= DROP INDEX ix ON tt_1;
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
# 8: DDL EVENT which triggered the previous commmit.
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 11)
{
let $cmd= CREATE TEMPORARY TABLE tt_xx (a int);
let $in_temporary= yes;
# In SBR and MIXED modes, the DDL statement is written to the binary log but
# does not commit the current transaction.
#
# 1: GTID
# 2: BEGIN
# 3: CREATE TEMPORARY
# 4: INSERT
# 5: COMMIT
#
# In RBR the transaction is not committed either and the statement is not
# written to the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: COMMIT
#
if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'` )
{
let $commit_event_row_number= 5;
}
#
# In NDB (RBR mode), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if (`SELECT '$engine' = 'NDB' && @@binlog_format = 'ROW'` )
{
let $commit_event_row_number= 7;
}
#
# In NDB (MIXED mode), the commit event is the nineth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: DDL EVENT which triggered the previous commmit.
# 4: COMMIT
# 5: GTID
# 6: BEGIN
# 7: TABLE MAP EVENT
# 8: TABLE MAP EVENT (ndb_apply_status)
# 9: ROW EVENT
# 10: ROW EVENT
# 11: COMMIT
#
if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'` )
{
let $commit_event_row_number= 11;
}
}
if ($ddl_cases == 10)
{
let $cmd= ALTER TABLE tt_xx ADD COLUMN (b int);
#
# In MIXED mode, the changes are logged as rows and we have what follows:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: COMMIT
# 6: GTID
# 7: DDL EVENT which triggered the previous commmit.
#
if (`select @@binlog_format = 'MIXED'`)
{
let $commit_event_row_number= 5;
}
#
# In NDB (RBR and MIXED modes), the commit event is the 7th event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 9)
{
let $cmd= ALTER TABLE tt_xx RENAME new_tt_xx;
#
# In MIXED mode, the changes are logged as rows and we have what follows:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: COMMIT
# 6: DDL EVENT which triggered the previous commmit.
#
if (`select @@binlog_format = 'MIXED'`)
{
let $commit_event_row_number= 5;
}
#
# In NDB (RBR and MIXED modes), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 8)
{
let $cmd= DROP TEMPORARY TABLE IF EXISTS new_tt_xx;
let $in_temporary= yes;
#
# In SBR and MIXED modes, the DDL statement is written to the binary log
# but does not commit the current transaction:
#
# In SBR, we have what follows:
#
# 1: GTID
# 2: BEGIN
# 3: INSERT
# 4: DROP TEMPORARY
# 5: COMMIT
#
# In RBR the transaction is not committed either and the statement is not
# written to the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: COMMIT
#
if (`select @@binlog_format = 'STATEMENT'`)
{
let $commit_event_row_number= 5;
}
# In MIXED mode, the changes are logged as rows and we have what follows:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: ROW EVENT
# 5: DROP TEMPORARY table IF EXISTS
# 6: COMMIT
#
if (`select @@binlog_format = 'MIXED' || @@binlog_format = 'ROW'`)
{
let $commit_event_row_number= 6;
}
#
# In NDB (RBR and MIXED modes), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: DROP TEMPORARY table IF EXISTS
# 4: COMMIT
# 5: GTID
# 6: BEGIN
# 7: TABLE MAP EVENT
# 8: TABLE MAP EVENT (ndb_apply_status)
# 9: ROW EVENT
# 10: ROW EVENT
# 11: COMMIT
#
if ($engine == NDB)
{
let $commit_event_row_number= 11;
}
#
# In NDB (MIXED mode), the commit event is the nineth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: DDL EVENT which triggered the previous commmit.
# 4: COMMIT
# 5: GTID
# 6: BEGIN
# 7: TABLE MAP EVENT
# 8: TABLE MAP EVENT (ndb_apply_status)
# 9: ROW EVENT
# 10: ROW EVENT
# 11: COMMIT
#
if (`SELECT '$engine' = 'NDB' && @@binlog_format != 'ROW'` )
{
let $commit_event_row_number= 11;
}
}
if ($ddl_cases == 7)
{
let $cmd= CREATE TABLE tt_xx (a int);
}
if ($ddl_cases == 6)
{
let $cmd= ALTER TABLE tt_xx ADD COLUMN (b int);
}
if ($ddl_cases == 5)
{
let $cmd= RENAME TABLE tt_xx TO new_tt_xx;
}
if ($ddl_cases == 4)
{
let $cmd= TRUNCATE TABLE new_tt_xx;
}
if ($ddl_cases == 3)
{
let $cmd= DROP TABLE IF EXISTS tt_xx, new_tt_xx;
}
if ($ddl_cases == 2)
{
let $cmd= CREATE DATABASE db;
#
# In NDB (RBR and MIXED modes), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
# 8: GTID
# 9: DDL EVENT which triggered the previous commmit.
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
if ($ddl_cases == 1)
{
let $cmd= DROP DATABASE IF EXISTS db;
#
# In NDB (RBR and MIXED modes), the commit event is the sixth event
# in the binary log:
#
# 1: GTID
# 2: BEGIN
# 3: TABLE MAP EVENT
# 4: TABLE MAP EVENT (ndb_apply_status)
# 5: ROW EVENT
# 6: ROW EVENT
# 7: COMMIT
# 8: GTID
# 9: DDL EVENT which triggered the previous commmit.
#
if ($engine == NDB)
{
let $commit_event_row_number= 7;
}
}
--replace_result $UDF_EXAMPLE_LIB UDF_EXAMPLE_LIB
--eval $cmd
--disable_query_log
#
# When a temporary table is either created or dropped, there is no implicit
# commit. The flag in_temporary is used to avoid aborting the test in such
# cases. Thus we force the commit.
#
if ($in_temporary == yes)
{
--eval COMMIT
}
if ($check_position_of_commit_event == yes)
{
--let $assert_cond= SUBSTRING("[SHOW BINLOG EVENTS FROM $first_binlog_position LIMIT $commit_event_row_number, Info, $commit_event_row_number]", 1, 6) = "COMMIT"
--let $assert_text= There should be a COMMIT event at the specified position (test#$ddl_cases)
--source include/assert.inc
}
--echo -e-e-e-e-e-e-e-e-e-e-e- >> << -e-e-e-e-e-e-e-e-e-e-e-
let $binlog_start= $first_binlog_position;
--echo -b-b-b-b-b-b-b-b-b-b-b- >> << -b-b-b-b-b-b-b-b-b-b-b-
--source include/show_binlog_events.inc
--echo -e-e-e-e-e-e-e-e-e-e-e- >> << -e-e-e-e-e-e-e-e-e-e-e-
--echo
dec $ddl_cases;
}
SET AUTOCOMMIT= 1;
--echo ###################################################################################
--echo # CHECK CONSISTENCY
--echo ###################################################################################
--source include/sync_slave_sql_with_master.inc
--let $diff_tables= master:tt_1,slave:tt_1
--source include/diff_tables.inc
--echo ###################################################################################
--echo # CLEAN
--echo ###################################################################################
connection master;
DROP TABLE tt_1;
DROP TABLE tt_2;
DROP TABLE nt_1;
--source include/sync_slave_sql_with_master.inc