| Current Path : /home/usr.opt/mysql57/mysql-test/suite/memcached/t/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //home/usr.opt/mysql57/mysql-test/suite/memcached/t/memc250_container.test |
source include/not_valgrind.inc;
source include/have_memcached_plugin.inc;
source include/not_windows.inc;
source include/have_innodb.inc;
--disable_query_log
CALL mtr.add_suppression("daemon-memcached-w-batch-size': unsigned");
CALL mtr.add_suppression("Could not obtain server's UPN to be used as target service name");
CALL mtr.add_suppression("InnoDB: Warning: MySQL is trying to drop");
--enable_query_log
--enable_connect_log
SET @tx_isolation= @@global.tx_isolation;
SET GLOBAL TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
# Create the memcached tables
--disable_query_log
source include/memcache_config.inc;
--enable_query_log
INSERT INTO cache_policies VALUES("cache_policy", "innodb_only",
"innodb_only", "innodb_only", "innodb_only");
INSERT INTO config_options VALUES("separator", "|");
# describe table for memcache
INSERT INTO containers VALUES ("desc_t1", "test", "t1",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
USE test;
--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings
CREATE TABLE t1 (c1 VARCHAR(32),
c2 VARCHAR(1024),
c3 INT, c4 BIGINT UNSIGNED, c5 INT, primary key(c1))
ENGINE = INNODB;
INSERT INTO t1 VALUES ('D', 'Darmstadt', 0, 0, 0);
INSERT INTO t1 VALUES ('B', 'Berlin', 0, 0, 0);
INSERT INTO t1 VALUES ('C', 'Cottbus', 0, 0 ,0);
INSERT INTO t1 VALUES ('H', 'Hamburg', 0, 0, 0);
# Tables must exist before plugin can be started!
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
# The following select is writing all to memcache otherwisw memcache is empty.
--sorted_result
SELECT c1,c2 FROM t1;
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t1;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E:\n";
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t1;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E,H:\n";
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$val = $memd->get("H");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Switch to a different table
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
UNINSTALL PLUGIN daemon_memcached;
use innodb_memcache;
DELETE FROM containers;
# describe table for memcache
INSERT INTO containers VALUES ("desc_t2", "test", "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
USE test;
--disable_warnings
DROP TABLE IF EXISTS t1;
--enable_warnings
CREATE TABLE t2 (c1 VARCHAR(32),
c2 VARCHAR(1024),
c3 INT, c4 BIGINT UNSIGNED, c5 INT, primary key(c1))
ENGINE = INNODB;
INSERT INTO t2 VALUES ('D', 't2_Darmstadt', 0, 0, 0);
INSERT INTO t2 VALUES ('B', 't2_Berlin', 0, 0, 0);
INSERT INTO t2 VALUES ('C', 't2_Cottbus', 0, 0 ,0);
INSERT INTO t2 VALUES ('H', 't2_Hamburg', 0, 0, 0);
# Tables must exist before plugin can be started!
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
# The following select is writing all to memcache otherwisw memcache is empty.
--sorted_result
SELECT c1,c2 FROM t2;
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E:\n";
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E,H:\n";
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$val = $memd->get("H");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Schema name as NULL
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
UNINSTALL PLUGIN daemon_memcached;
use innodb_memcache;
DELETE FROM containers;
--error 1048
INSERT INTO containers VALUES ("desc_t2", NULL, "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
--error 1048
INSERT INTO containers VALUES ("desc_t2", "test", "t2",
NULL, "c2", "c3", "c4", "c5", "PRIMARY");
#----------------------------------------------------------------
# Non-existing Schema
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
DELETE FROM containers;
# describe table for memcache
INSERT INTO containers VALUES ("desc_t2", "junk", "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
# even though the plugin can be installed, the initialization will fail
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
print " This will fail, since memcached not initialized \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$val = $memd->get("H");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Test different column types
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
UNINSTALL PLUGIN daemon_memcached;
DELETE FROM containers;
# describe table for memcache
INSERT INTO containers VALUES ("desc_t2", "test", "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
USE test;
--disable_warnings
DROP TABLE IF EXISTS t2;
--enable_warnings
CREATE TABLE t2 (c1 int,
c2 VARCHAR(1024),
c3 INT, c4 BIGINT UNSIGNED, c5 INT, primary key(c1))
ENGINE = INNODB;
INSERT INTO t2 VALUES (3, 't2_Hamburg', 0, 0, 0);
# Tables must exist before plugin can be started!
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
print " This will success, since memcached support int as key \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("3");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Test different column types
#----------------------------------------------------------------
use test;
--disable_warnings
DROP TABLE IF EXISTS t2;
--enable_warnings
CREATE TABLE t2 (c1 CHAR(10),
c2 VARCHAR(1024),
c3 INT, c4 INT, c5 INT, primary key(c1));
INSERT INTO t2 VALUES ('H', 't2_Hamburg', 0, 0, 0);
UNINSTALL PLUGIN daemon_memcached;
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
print " This will fail, since memcached not initialized \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("H");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Test CAS
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
UNINSTALL PLUGIN daemon_memcached;
use innodb_memcache;
DELETE FROM containers;
# describe table for memcache
INSERT INTO containers VALUES ("desc_t2", "test", "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
USE test;
--disable_warnings
DROP TABLE IF EXISTS t2;
--enable_warnings
CREATE TABLE t2 (c1 VARCHAR(32),
c2 VARCHAR(1024),
c3 INT, c4 BIGINT UNSIGNED, c5 INT, primary key(c1))
ENGINE = INNODB;
# Tables must exist before plugin can be started!
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
# The following select is writing all to memcache otherwisw memcache is empty.
--sorted_result
SELECT c1,c2 FROM t2;
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
# Notice the cas value is updated
--sorted_result
SELECT c1, c2, c4 FROM t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add G|Gossen:\n";
if ($memd->add("G","Gossen")) {
print "Ok.\n";
}
else {
print "Error: G|Gossen is still existing.\n";
}
if ($memd->add("H","Hamburg")) {
print "Ok.\n";
}
else {
print "Error: H|Hamburg is still existing.\n";
}
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2, c4 FROM t2;
#----------------------------------------------------------------
# Test expiration
#----------------------------------------------------------------
--sorted_result
SELECT * FROM test.t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add B|Berlin expires in 1 seconds:\n";
if ($memd->add("B","Berlin",1)) {
print "Ok.\n";
}
else {
print "Error: B|Berlin is still existing.\n";
}
$memd->disconnect_all;
EOF
select sleep(3);
perl;
use DBI;
use Cache::Memcached;
print " Should not find B|Berlin, since it is expired \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("B");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add C|Cottbus, expires 100 seconds:\n";
if ($memd->add("C","Cottbus", 100)) {
print "Ok.\n";
}
else {
print "Error: C|Cottbus is still existing.\n";
}
perl;
use DBI;
use Cache::Memcached;
print " Should be able to find C|Cottbus, assume it does not take 100s to get here \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("C");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
# set an expiration to be 60*60*24*30 (seconds in 30 days), it
# will be considered as absolute time
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add J|Jilin\n";
if ($memd->add("J","Jilin", 2592001)) {
print "Ok.\n";
}
else {
print "Error: J|Jilin is still existing.\n";
}
$memd->disconnect_all;
EOF
perl;
use DBI;
use Cache::Memcached;
print " Should not find J|Jilin, it should be expired \n";
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
$val = $memd->get("J");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
#----------------------------------------------------------------
# Alter mapped column type
#----------------------------------------------------------------
# Stop plugin before innodb_memcached configuration
UNINSTALL PLUGIN daemon_memcached;
use innodb_memcache;
DELETE FROM containers;
# describe table for memcache
INSERT INTO containers VALUES ("desc_t2", "test", "t2",
"c1", "c2", "c3", "c4", "c5", "PRIMARY");
USE test;
--disable_warnings
DROP TABLE IF EXISTS t2;
--enable_warnings
CREATE TABLE t2 (c1 VARCHAR(32),
c2 VARCHAR(1024),
c3 INT, c4 BIGINT UNSIGNED, c5 INT, primary key(c1))
ENGINE = INNODB;
INSERT INTO t2 VALUES ('D', 't2_Darmstadt', 0, 0, 0);
INSERT INTO t2 VALUES ('B', 't2_Berlin', 0, 0, 0);
INSERT INTO t2 VALUES ('C', 't2_Cottbus', 0, 0 ,0);
INSERT INTO t2 VALUES ('H', 't2_Hamburg', 0, 0, 0);
# Tables must exist before plugin can be started!
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
# The following select is writing all to memcache otherwisw memcache is empty.
--sorted_result
SELECT c1,c2 FROM t2;
SELECT SLEEP(2);
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$memd->disconnect_all;
EOF
connection default;
--disable_query_log
--disable_warnings
delete from test.t2;
alter table test.t2 modify c2 int;
select c1, c2 from test.t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Add E|Essen:\n";
if ($memd->add("E","Essen")) {
print "Ok.\n";
}
else {
print "Error: E|Essen is still existing.\n";
}
$val = $memd->get("B");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E:\n";
$val = $memd->get("E");
if ($val) { print "value of E is $val end. \n"; }
$memd->disconnect_all;
EOF
--sorted_result
SELECT c1,c2 FROM t2;
perl;
use DBI;
use Cache::Memcached;
my $memd = new Cache::Memcached {
'servers' => [ "127.0.0.1:11250" ],
'connect_timeout' => 20,
'select_timeout' => 20
};
print "Here the memcached results with E,H:\n";
$val = $memd->get("E");
if ($val) { print "$val\n"; }
$val = $memd->get("H");
if ($val) { print "$val\n"; }
$memd->disconnect_all;
EOF
connection default;
UNINSTALL PLUGIN daemon_memcached;
--enable_warnings
--enable_query_log
alter table test.t2 change c2 c_new int;
show create table test.t2;
# This install will not initialize the table mapping, due to column
# type mismatch
INSTALL PLUGIN daemon_memcached SONAME 'libmemcached.so';
#----------------------------------------------------------------
DROP TABLE t2;
UNINSTALL PLUGIN daemon_memcached;
DROP DATABASE innodb_memcache;
SET @@global.tx_isolation= @tx_isolation;