config root man

# ==== Purpose ====
#
# In order to avoid problems with GTIDs, MySQL server should refuse to execute
# any statements that will be split before sending to binlog if
# @@SESSION.GTID_NEXT is set to 'UUID:NUMBER'.
#
# In MySQL server, DROP TABLE statements can be split into up to three
# distinct binlog events: one containing the regular tables, one containing
# transactional temporary tables and one containing non-transactional
# temporary tables.
#
# In the first part, this test will verify if a splittable DROP TABLE
# statement is being refused to execute throwing the correct error to the
# client session.
#
# In the second part, this test will verify an issue with inexistent temporary
# tables being assumed as transactional on the slave side. This was making
# the slave to split a DROP statement that the master logged as a single DROP
# statement.
#
# In the third part, this test will verify that a slave having to drop
# temporary tables because of the master have restarted will split the DROP
# TABLE statement also based on table types (transactional or not).
#
# The details about the implementation of this test is in the beginning of
# each part.
#
# ==== Related Bugs and Worklogs ====
#
# BUG#17620053: SET GTID_NEXT AND DROP TABLE WITH BOTH REGULAR AND TEMPORARY
#               TABLES
#
--let $rpl_topology= 1->2->3
--source include/have_gtid.inc
--source include/rpl_init.inc
--source include/rpl_default_connections.inc
--source include/have_innodb.inc
--source include/have_myisam.inc

--echo #
--echo # First part
--echo #
#
# This part verifies the splittable DROP TABLE behavior in client sessions by
# creating three tables (one regular and two temporary), setting session
# GTID_NEXT to a specific GTID and then trying to issue a DROP TABLE
# statement containing the combinations of at least two tables.
#
# As DROP statements with both regular and temporary tables or with
# transactional and non transactional temporary tables are split before
# sending to binlog, the following DROP statements must return an error to the
# client session because of being considered unsafe for GTID enforcement as it
# would be split into two (or three) statements to be sent to binlog.
#
# In order to improve the test coverage, we will verify DROP TABLE statements
# with all combinations of the following:
# 1) Regular transactional table;
# 2) Regular non-transactional table;
# 3) Temporary transactional table;
# 4) Temporary non-transactional table;
# 5) Nonexistent table.
#
# With the above set we could make up to 32 possibilities (including none of
# above). But we will test the behavior only for the following combinations:
# - 18 error cases (ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP):
#   (1 | 2 | 1+2) + (3 | 4 | 3+4) + (nothing | 5)
#   (3+4) | (3+4+5)
#   (3 | 4) + 5  /* as this it not DROP TEMPORARY, nonexistent tables will be
#                   assumed as regular tables, so the DROP will be split */
# - 3 error cases (ER_BAD_TABLE_ERROR):
#   (1 | 2 | 1+2) + 5
# - 1 non-error case:
#   1+2
# Note: for ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP cases, the
# statement will not be executed and no DROP will be performed. For
# ER_BAD_TABLE_ERROR cases, the existent tables will be dropped regardless the
# error.

# Create two regular tables and two temporary tables with distinct storage engines
--source include/rpl_connection_master.inc
CREATE TABLE trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TABLE non_trans_t1 (c1 INT) ENGINE=MyISAM;
CREATE TEMPORARY TABLE temp_trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TEMPORARY TABLE temp_non_trans_t1 (c1 INT) ENGINE=MyISAM;

--echo # Error cases ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP
--let $next_gtid= '11111111-1111-1111-1111-111111111111:1'
--let $expected_error= ER_GTID_UNSAFE_BINLOG_SPLITTABLE_STATEMENT_AND_GTID_GROUP

# reg trans + reg non trans + temp trans
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + reg non trans + temp trans + temp non trans
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + reg non trans + temp trans + temp non trans + inexistent
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + reg non trans + temp trans + inexistent
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + reg non trans + temp non trans
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + reg non trans + temp non trans + inexistent
--let $statement= DROP TABLE trans_t1, non_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp trans
--let $statement= DROP TABLE trans_t1, temp_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp trans + temp non trans
--let $statement= DROP TABLE trans_t1, temp_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp trans + temp non trans + inexistent
--let $statement= DROP TABLE trans_t1, temp_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp trans + inexistent
--let $statement= DROP TABLE trans_t1, temp_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp non trans
--let $statement= DROP TABLE trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg trans + temp non trans + inexistent
--let $statement= DROP TABLE trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp trans
--let $statement= DROP TABLE non_trans_t1, temp_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp trans + temp non trans
--let $statement= DROP TABLE non_trans_t1, temp_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp trans + temp non trans + inexistent
--let $statement= DROP TABLE non_trans_t1, temp_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp trans + inexistent
--let $statement= DROP TABLE non_trans_t1, temp_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp non trans
--let $statement= DROP TABLE non_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# reg non trans + temp non trans + inexistent
--let $statement= DROP TABLE non_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# temp trans + temp non trans
--let $statement= DROP TABLE temp_trans_t1, temp_non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# temp trans + temp non trans + inexistent
--let $statement= DROP TABLE temp_trans_t1, temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# temp trans + inexistent
--let $statement= DROP TABLE temp_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# temp non trans + inexistent
--let $statement= DROP TABLE temp_non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc

--echo # Error cases ER_BAD_TABLE_ERROR
--let $expected_error= ER_BAD_TABLE_ERROR

# reg trans + reg non trans + inexistent
--let $next_gtid= '11111111-1111-1111-1111-111111111111:1'
--let $statement= DROP TABLE trans_t1, non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# recreate the trans table
SET GTID_NEXT= AUTOMATIC;
CREATE TABLE trans_t1 (c1 INT) ENGINE=InnoDB;
# reg trans + inexistent
--let $next_gtid= '11111111-1111-1111-1111-111111111111:2'
--let $statement= DROP TABLE trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc
# recreate the non trans table
SET GTID_NEXT= AUTOMATIC;
CREATE TABLE non_trans_t1 (c1 INT) ENGINE=MyISAM;
# reg non trans + inexistent
--let $next_gtid= '11111111-1111-1111-1111-111111111111:3'
--let $statement= DROP TABLE non_trans_t1, non_existent
--source extra/rpl_tests/rpl_gtid_drop_table.inc

SET GTID_NEXT= AUTOMATIC;
CREATE TABLE trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TABLE non_trans_t1 (c1 INT) ENGINE=MyISAM;

--echo # Non-error cases
--let $expected_error=

# reg trans + reg non trans
--let $next_gtid= '11111111-1111-1111-1111-111111111111:4'
--let $statement= DROP TABLE trans_t1, non_trans_t1
--source extra/rpl_tests/rpl_gtid_drop_table.inc

SET GTID_NEXT= AUTOMATIC;
CREATE TABLE trans_t1 (c1 INT) ENGINE=InnoDB;


--echo #
--echo # Second part
--echo #
#
# The MySQL server cannot evaluate if an inexistent temporary table is
# transactional or not. Before the fix for BUG#17620053, the inexistent
# temporary tables were assumed to be transactional.
#
# This assumption could lead to a split if, for example, you issue a DROP
# TEMPORARY TABLE for two existent non-transactional temporary tables in the
# master (will binlog only one statement) but a filter made one of the
# temporary tables inexistent on the slave side (will binlog two statements:
# one with the existent non-transactional table and other with the inexistent
# table assumed to be transactional).
#
# As this test has a filter in its slave configuration like this:
# '--replicate-ignore-table=test.temp_ignore', all statements containing the
# 'test.temp_ignore' temporary table alone wont be executed by the SQL slave
# thread. So, the CREATE TABLE statements for 'temp_ignore' table will be
# executed only on the master.
#
# Issuing a DROP TEMPORARY TABLE statement in the master containing the two
# non-transaction temporary tables would result in a single binlog statement,
# as the two tables are non-transactional ones.
#
# In the slave, because of the filter, the non-replicated table will be
# assumed unknown. With the fix for BUG#17620053, the unknown tables will
# be assumed as transactional only if at least one transactional table is
# dropped. If the DROP recognizes only non-transactional tables, the unknown
# temporary tables will be assumed non-transactional, avoiding splitting the
# statement.

# Create an additional non-transactional temporary table that will not be
# replicated due to the replication filter, only t1 will be replicated.
CREATE TEMPORARY TABLE temp_ignore (c1 INT) ENGINE=MyISAM;
# Drop the two non-transactional temp tables
DROP TEMPORARY TABLE IF EXISTS temp_ignore, temp_non_trans_t1;
# Sync to know that everything was replicated
--source include/sync_slave_sql_with_master.inc
# Back to the 'master' connection
--source include/rpl_connection_master.inc
# Create temp_ignore table again, but with InnoDB storage engine
CREATE TEMPORARY TABLE temp_ignore (c1 INT) ENGINE=InnoDB;
# Drop the two transactional temp tables
DROP TEMPORARY TABLE IF EXISTS temp_ignore, temp_trans_t1;
# Sync to know that everything was replicated
--source include/sync_slave_sql_with_master.inc

--echo #
--echo # Third part
--echo #
#
# This part was adapted from rpl_create_drop_temp_table.test
#
# As we use three server topology, when the slave (mysqld 2) detects the
# master (mysqld 1) has restarted it will drop the temporary tables and
# will binlog the DROP TABLE statements that will be replicated to
# the third server (mysqld 3).
#
# As the DROP of temporary table in the slave side groups the tables
# by pseudo-threadid and by database, we will use two sessions on master,
# creating three sets of temporary tables, each set on a distinct database.
#
# The first set contains two tables with distinct storage engines, the
# second set contains a single table and the third set contains two tables
# with the same storage engine.
#
--source include/rpl_connection_master.inc
SET SESSION sql_log_bin= 0;
call mtr.add_suppression("InnoDB: Error: table .* does not exist in the InnoDB internal");
SET SESSION sql_log_bin= 1;

CREATE DATABASE test2;
CREATE DATABASE test3;

# Create two temporary tables with distinct storage engines in 'test'
# This should generate two DROP statements
use test;
CREATE TEMPORARY TABLE temp_trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TEMPORARY TABLE temp_non_trans_t1 (c1 INT) ENGINE=MyISAM;
# Create one temporary table with transactional storage engine in 'test2'
# This should generate only one DROP statement
USE test2;
CREATE TEMPORARY TABLE temp_trans_t1 (c1 INT) ENGINE=InnoDB;
# Create two temporary tables with transactional storage engine in 'test3'
# This should generate only one DROP statement with the two tables
USE test3;
CREATE TEMPORARY TABLE temp_trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TEMPORARY TABLE temp_trans_t2 (c1 INT) ENGINE=InnoDB;

# Create two temporary tables with distinct storage engines in 'test'
# in another client session. This should generate two DROP statements
--source include/rpl_connection_master1.inc
use test;
CREATE TEMPORARY TABLE temp_trans_t1 (c1 INT) ENGINE=InnoDB;
CREATE TEMPORARY TABLE temp_non_trans_t1 (c1 INT) ENGINE=MyISAM;
# Create one temporary table with non-transactional storage engine in 'test2'
# This should generate only one DROP statement
USE test2;
CREATE TEMPORARY TABLE temp_non_trans_t1 (c1 INT) ENGINE=MyISAM;
# Create two temporary tables with non-transactional storage engine in 'test3'
# This should generate only one DROP statement with the two tables
USE test3;
CREATE TEMPORARY TABLE temp_non_trans_t1 (c1 INT) ENGINE=MyISAM;
CREATE TEMPORARY TABLE temp_non_trans_t2 (c1 INT) ENGINE=MyISAM;

# Sync to know that everything was replicated
--source include/sync_slave_sql_with_master.inc

# Stop slave io thread
--disable_warnings
--source include/stop_slave_io.inc
--enable_warnings

# Kill Master so that it does not go through THD::cleanup logic. Hence it does
# not generate "drop temporary" query for 'temp' tables.
--let $rpl_server_number= 1
--let $rpl_force_stop=1
--source include/rpl_stop_server.inc

# Restart Master (generates Format Description event which tells slave to
# drop all temporary tables)
--source include/rpl_start_server.inc

# Start and sync slave IO thread
--source include/rpl_connection_slave.inc
--source include/start_slave_io.inc
--source include/rpl_connection_master.inc
--source include/sync_slave_io_with_master.inc

# Wait for slave thread to apply all events (including the newly generated
# FormatDescription event which tells slave SQL thread to drop all temporary
--let $show_statement= SHOW PROCESSLIST
--let $field= State
--let $condition= 'Slave has read all relay log; waiting for the slave I/O thread to update it';
--source include/wait_show_condition.inc

# Now we verify slave_open_temp_tables, it should be '0'
--let $assert_text= Slave_open_temp_tables should be 0
--let $assert_cond= [SHOW STATUS LIKE "Slave_open_temp_tables", Value, 1] = 0
--source include/assert.inc

# Cleanup replication
--source include/rpl_connection_master.inc
USE test;
DROP TABLE trans_t1;
DROP DATABASE test2;
DROP DATABASE test3;
--source include/rpl_end.inc