config root man

##############################################################################
# WL#4677 Unique Server Ids for Replication Topology (UUIDs)                 #
#
# Master and slave exchange their UUID each other when connecting. Master's
# UUID is set into the result of 'SHOW SLAVE STATUS' and stored into
# master.info file. Slave's UUID appears in the result of 'SHOW SLAVE HOSTS'.
# Slave and master cannot have the same UUID, except
# --replicate-same-server-id is set.
#
##############################################################################
# Does not work with GTIDs because it uses replicate-same-server-id to
# replicate from one server to itself.
--source include/not_gtid_enabled.inc
--source include/no_valgrind_without_big.inc
# This test case is binlog_format agnostic
--source include/have_binlog_format_mixed.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc

--let $rpl_server_count= 3
--source include/master-slave.inc

call mtr.add_suppression("Slave I/O thread .* register on master");
call mtr.add_suppression("Slave I/O: Master command COM_REGISTER_SLAVE failed: .*");
CALL mtr.add_suppression(".*master and slave have equal MySQL server UUIDs.*");
CALL mtr.add_suppression("Master's UUID has changed, although this should not happen unless you have changed it manually");
CALL mtr.add_suppression("Slave I/O: SET @master_heartbeat_period to master failed with error: Lost connection to MySQL server during query");
CALL mtr.add_suppression("Notifying master by SET @master_binlog_checksum= @@global.binlog_checksum failed with error");
CALL mtr.add_suppression("A slave with the same server_uuid/server_id as this slave has connected to the master");

--let $uuid_file= auto.cnf

--let $master_datadir=`SELECT @@DATADIR`
# Sync suppressions
--source include/sync_slave_sql_with_master.inc
--let $slave_datadir=`SELECT @@DATADIR`

connection server_3;
--let $server_3_datadir=`SELECT @@DATADIR`

connection master;
--let $original_master_uuid=query_get_value(SELECT @@SERVER_UUID, @@SERVER_UUID, 1)
--copy_file $master_datadir/$uuid_file $master_datadir/original_$uuid_file

--echo
--echo # Case 1:
--echo # Master's UUID appears in the result of 'SHOW SLAVE STATUS'.
--echo # Slave's UUID appears in the result of 'SHOW SLAVE HOSTS'.
--echo -----------------------------------------------------------------------------

--let $assert_cond= "[master:SELECT @@SERVER_UUID AS a, a, 1]" = "[slave:SHOW SLAVE STATUS, Master_UUID, 1]"
--let $assert_text= "Slave's SHOW SLAVE HOST should contain the correct value for master's server_uuid
--source include/assert.inc

--let $assert_cond= "[master:SHOW SLAVE HOSTS, Slave_UUID, 1]" = "[slave:SHOW VARIABLES LIKE "SERVER_UUID", Value, 1]"
--let $assert_text= Master's SHOW SLAVE HOSTS should contain the correct value for slave's server_uuid
--source include/assert.inc

connection slave;

--echo 
--echo # Case 2: 
--echo # After executing 'STOP SLAVE [IO_THREAD|SQL_THREAD]' successfully, Master's UUID
--echo # is still kept into Slave status.
--echo -----------------------------------------------------------------------------
--source include/stop_slave_io.inc
source include/check_slave_param.inc;

--source include/stop_slave_sql.inc
--source include/check_slave_param.inc

--source include/start_slave.inc
--source include/stop_slave.inc
source include/check_slave_param.inc;

--echo
--echo # Case 3:
--echo # Slave generates an error and aborts, if master's UUID is
--echo # equal to slave's UUID unless --replicate-same-server-id
--echo # option is set.
--echo -----------------------------------------------------------------------------
connection master;
# copy slave's server_properties file to master, so master will have a same
# UUID as slave.
--remove_file $master_datadir/$uuid_file
--copy_file $slave_datadir/$uuid_file $master_datadir/$uuid_file
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc

connection slave;
START SLAVE IO_THREAD;

let $show_statement= SHOW SLAVE STATUS;
--let $slave_io_errno= 1593
--source include/wait_for_slave_io_error.inc

connection master;
--remove_file $master_datadir/$uuid_file
--copy_file $server_3_datadir/$uuid_file $master_datadir/$uuid_file
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc
--let $master_log_file= query_get_value(SHOW MASTER STATUS, 'File', 1)
--let $master_log_pos= query_get_value(SHOW MASTER STATUS, 'Position', 1)

--echo 
--echo # server_3 is running with --replicate-same-server-id option 
connection server_3;
--replace_result $MASTER_MYPORT MASTER_PORT
--replace_column 2 ####
eval CHANGE MASTER TO MASTER_HOST= '127.0.0.1',
     MASTER_PORT= $MASTER_MYPORT,
     MASTER_USER= 'root',
     MASTER_LOG_FILE='master-bin.000001';
--source include/start_slave.inc
--source include/check_slave_no_error.inc

connection master;
--let $sync_slave_connection= server_3
--source include/sync_slave_sql_with_master.inc
--source include/stop_slave.inc

connection master;
--remove_file $master_datadir/$uuid_file
--move_file $master_datadir/original_$uuid_file $master_datadir/$uuid_file
--let $rpl_server_number= 1
--source include/rpl_restart_server.inc

--echo
--echo # Case 4:
--echo # When executing 'CHANGE MASTER ...', master's UUID and server_id will be
--echo # cleared if master_host or/and master_port are changed.
--echo # Master's UUID and server_id will not be cleared if both master_port
--echo # and master_host are not changed.
--echo -----------------------------------------------------------------------------
connection slave;
--source include/start_slave_io.inc
--let $slave_param= Master_UUID
--let $slave_param_value= $original_master_uuid
--source include/wait_for_slave_param.inc

--source include/stop_slave.inc

--echo
--echo # Only change MASTER_PORT
let $old_master_log_file= query_get_value(SHOW SLAVE STATUS, Master_Log_File, 1);
let $old_master_log_pos= query_get_value(SHOW SLAVE STATUS, Read_Master_Log_Pos, 1);

CHANGE MASTER TO MASTER_PORT= 1111;
--let $slave_param= Master_UUID
--let $slave_param_value= 
--source include/check_slave_param.inc
--let $slave_param= Master_Server_Id
--let $slave_param_value= 0
--source include/check_slave_param.inc

--replace_result $old_master_log_file MASTER_LOG_FILE $MASTER_MYPORT MASTER_PORT $old_master_log_pos MASTER_POS
eval CHANGE MASTER TO MASTER_PORT= $MASTER_MYPORT,
       MASTER_LOG_FILE= '$old_master_log_file', MASTER_LOG_POS= $old_master_log_pos;
--source include/start_slave_io.inc
--let $slave_param= Master_UUID
--let $slave_param_value= $original_master_uuid
--source include/wait_for_slave_param.inc

--echo
--echo # Only change MASTER_HOST
STOP SLAVE IO_THREAD;
--source include/wait_for_slave_io_to_stop.inc
let $old_master_log_file= query_get_value(SHOW SLAVE STATUS, Master_Log_File, 1);
let $old_master_log_pos= query_get_value(SHOW SLAVE STATUS, Read_Master_Log_Pos, 1);

CHANGE MASTER TO MASTER_HOST= 'localhost';
--let $slave_param= Master_UUID
--let $slave_param_value=
--source include/check_slave_param.inc
--let $slave_param= Master_Server_Id
--let $slave_param_value= 0
--source include/check_slave_param.inc

--replace_result $old_master_log_file MASTER_LOG_FILE $MASTER_MYPORT MASTER_PORT $old_master_log_pos MASTER_POS
eval CHANGE MASTER TO MASTER_HOST= '127.0.0.1',
       MASTER_LOG_FILE= '$old_master_log_file', MASTER_LOG_POS= $old_master_log_pos;
--source include/start_slave_io.inc
--let $slave_param= Master_UUID
--let $slave_param_value= $original_master_uuid
--source include/wait_for_slave_param.inc

--echo
--echo # Both MASTER_HOST and MASTER_PORT are changed
STOP SLAVE IO_THREAD;

--source include/wait_for_slave_io_to_stop.inc
CHANGE MASTER TO MASTER_HOST= '127.0.0.1', MASTER_PORT= 1111;
--let $slave_param= Master_UUID
--let $slave_param_value=
--source include/check_slave_param.inc
--let $slave_param= Master_Server_Id
--let $slave_param_value= 0
--source include/check_slave_param.inc

--replace_result $old_master_log_file MASTER_LOG_FILE $MASTER_MYPORT MASTER_PORT $old_master_log_pos MASTER_POS
eval CHANGE MASTER TO MASTER_HOST= '127.0.0.1', MASTER_PORT= $MASTER_MYPORT,
       MASTER_LOG_FILE= '$old_master_log_file', MASTER_LOG_POS= $old_master_log_pos;
--source include/start_slave_io.inc
--let $slave_param= Master_UUID
--let $slave_param_value= $original_master_uuid
--source include/wait_for_slave_param.inc

--echo
--echo # Both MASTER_HOST and MASTER_PORT are NOT changed
STOP SLAVE IO_THREAD;
--source include/wait_for_slave_io_to_stop.inc

--replace_result $MASTER_MYPORT MASTER_PORT
eval CHANGE MASTER TO MASTER_HOST= '127.0.0.1', MASTER_PORT= $MASTER_MYPORT;
--source include/check_slave_param.inc

--replace_result $old_master_log_file MASTER_LOG_FILE $MASTER_MYPORT MASTER_PORT $old_master_log_pos MASTER_POS
eval CHANGE MASTER TO 
       MASTER_LOG_FILE= '$old_master_log_file', MASTER_LOG_POS= $old_master_log_pos;
--source include/check_slave_param.inc

--echo
--echo # Case 5:
--echo # After executing 'RESET SLAVE' successfully, Master's UUID is still kept 
--echo # into Slave status.
--echo -----------------------------------------------------------------------------
connection slave;
RESET SLAVE;
--source include/check_slave_param.inc

--replace_result $old_master_log_file MASTER_LOG_FILE $MASTER_MYPORT MASTER_PORT $old_master_log_pos MASTER_POS
eval CHANGE MASTER TO 
       MASTER_LOG_FILE= '$old_master_log_file', MASTER_LOG_POS= $old_master_log_pos;
--source include/start_slave.inc

--echo
--echo # Case 6:
--echo # In an existing master-slave replication forum (M->S1), if another
--echo # slave (S2) with the same UUID as S1 joins the forum and connects
--echo # to Master(M), the master will throw an error to the first slave
--echo # connection that will not try to reconnect.
--echo -----------------------------------------------------------------------------

# Get current server_2 thread_id at master
--connection server_1
--let $slave_thread_id= query_get_value(SELECT ID FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND='Binlog Dump', ID, 1)

# Step-1: Copy server 2(S1)'s auto.cnf into server 3 (S2)'s data directory.
--connection server_2
--let $datadir2=`select @@datadir`
-- connection server_3
--let $datadir3=`select @@datadir`
--copy_file $datadir3/auto.cnf $datadir3/auto_backup.cnf
--remove_file $datadir3/auto.cnf
--copy_file $datadir2/auto.cnf $datadir3/auto.cnf

# Step-2: Restart the server 3 (two servers with the same UUID)
--let $rpl_server_number= 3
--source include/rpl_restart_server.inc
# Notice that the other slave has stopped with an error
--let $rpl_connection_name= server_2
--source include/rpl_connection.inc
--let $slave_io_errno= convert_error(ER_MASTER_FATAL_ERROR_READING_BINLOG)
--source include/wait_for_slave_io_error.inc

--let $assert_file=$MYSQLTEST_VARDIR/log/mysqld.1.err
# Grep only after the message that the server_2 has connected to the master
--let $assert_only_after=Start binlog_dump to master_thread_id\($slave_thread_id\)
--let $assert_count= 1
--let $assert_select=found a zombie dump thread with the same UUID
--let $assert_text= Found the expected line in master's error log for server 2 disconnection
--source include/assert_grep.inc

# Get current server_3 thread_id at master
--connection server_1
--let $slave_thread_id= query_get_value(SELECT ID FROM INFORMATION_SCHEMA.PROCESSLIST WHERE COMMAND='Binlog Dump', ID, 1)

# Step-3: Connect server 2 and notice that the slave server 3 will error
--connection server_2
--source include/start_slave_io.inc
# Notice that the other slave has stopped with an error
--let $rpl_connection_name= server_3
--source include/rpl_connection.inc
--let $slave_io_errno= convert_error(ER_MASTER_FATAL_ERROR_READING_BINLOG)
--source include/wait_for_slave_io_error.inc

# Grep only after the message that the server_3 has connected to the master
--let $assert_only_after=Start binlog_dump to master_thread_id\($slave_thread_id\)
--let $assert_text= Found the expected line in master's error log for server 3 disconnection
--source include/assert_grep.inc

# Step-4: Check for error messages on slaves
--let $assert_file=$MYSQLTEST_VARDIR/log/mysqld.2.err
# Assert only the occurrences after the last CHANGE MASTER
--let $assert_only_after=CHANGE MASTER .* executed
--let $assert_select= Slave .* Got fatal error .* from master .* slave with the same server_uuid/server_id as this slave
--let $assert_text= Found the expected line in server 2 error log
--source include/assert_grep.inc

--let $assert_file=$MYSQLTEST_VARDIR/log/mysqld.3.err
--let $assert_text= Found the expected line in server 3 error log
--source include/assert_grep.inc

# Cleanup (restore the server 3's auto.cnf back to proper one and restart)
--remove_file $datadir3/auto.cnf
--copy_file $datadir3/auto_backup.cnf $datadir3/auto.cnf
--remove_file $datadir3/auto_backup.cnf
--let $rpl_server_number= 3
--source include/rpl_restart_server.inc
--source include/stop_slave.inc
--source include/rpl_end.inc