| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/amr/amr_linux/@/x86/cpufreq/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/amr/amr_linux/@/x86/cpufreq/smist.c |
/*-
* Copyright (c) 2005 Bruno Ducrot
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This driver is based upon information found by examining speedstep-0.5
* from Marc Lehman, which includes all the reverse engineering effort of
* Malik Martin (function 1 and 2 of the GSI).
*
* The correct way for the OS to take ownership from the BIOS was found by
* Hiroshi Miura (function 0 of the GSI).
*
* Finally, the int 15h call interface was (partially) documented by Intel.
*
* Many thanks to Jon Noack for testing and debugging this driver.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/x86/cpufreq/smist.c 187597 2009-01-22 20:29:07Z jkim $");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <machine/bus.h>
#include <machine/cputypes.h>
#include <machine/md_var.h>
#include <machine/vm86.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include "cpufreq_if.h"
#if 0
#define DPRINT(dev, x...) device_printf(dev, x)
#else
#define DPRINT(dev, x...)
#endif
struct smist_softc {
device_t dev;
int smi_cmd;
int smi_data;
int command;
int flags;
struct cf_setting sets[2]; /* Only two settings. */
};
static char smist_magic[] = "Copyright (c) 1999 Intel Corporation";
static void smist_identify(driver_t *driver, device_t parent);
static int smist_probe(device_t dev);
static int smist_attach(device_t dev);
static int smist_detach(device_t dev);
static int smist_settings(device_t dev, struct cf_setting *sets,
int *count);
static int smist_set(device_t dev, const struct cf_setting *set);
static int smist_get(device_t dev, struct cf_setting *set);
static int smist_type(device_t dev, int *type);
static device_method_t smist_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, smist_identify),
DEVMETHOD(device_probe, smist_probe),
DEVMETHOD(device_attach, smist_attach),
DEVMETHOD(device_detach, smist_detach),
/* cpufreq interface */
DEVMETHOD(cpufreq_drv_set, smist_set),
DEVMETHOD(cpufreq_drv_get, smist_get),
DEVMETHOD(cpufreq_drv_type, smist_type),
DEVMETHOD(cpufreq_drv_settings, smist_settings),
{0, 0}
};
static driver_t smist_driver = {
"smist", smist_methods, sizeof(struct smist_softc)
};
static devclass_t smist_devclass;
DRIVER_MODULE(smist, cpu, smist_driver, smist_devclass, 0, 0);
struct piix4_pci_device {
uint16_t vendor;
uint16_t device;
char *desc;
};
static struct piix4_pci_device piix4_pci_devices[] = {
{0x8086, 0x7113, "Intel PIIX4 ISA bridge"},
{0x8086, 0x719b, "Intel PIIX4 ISA bridge (embedded in MX440 chipset)"},
{0, 0, NULL},
};
#define SET_OWNERSHIP 0
#define GET_STATE 1
#define SET_STATE 2
static int
int15_gsic_call(int *sig, int *smi_cmd, int *command, int *smi_data, int *flags)
{
struct vm86frame vmf;
bzero(&vmf, sizeof(vmf));
vmf.vmf_eax = 0x0000E980; /* IST support */
vmf.vmf_edx = 0x47534943; /* 'GSIC' in ASCII */
vm86_intcall(0x15, &vmf);
if (vmf.vmf_eax == 0x47534943) {
*sig = vmf.vmf_eax;
*smi_cmd = vmf.vmf_ebx & 0xff;
*command = (vmf.vmf_ebx >> 16) & 0xff;
*smi_data = vmf.vmf_ecx;
*flags = vmf.vmf_edx;
} else {
*sig = -1;
*smi_cmd = -1;
*command = -1;
*smi_data = -1;
*flags = -1;
}
return (0);
}
/* Temporary structure to hold mapped page and status. */
struct set_ownership_data {
int smi_cmd;
int command;
int result;
void *buf;
};
/* Perform actual SMI call to enable SpeedStep. */
static void
set_ownership_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct set_ownership_data *data;
data = arg;
if (error) {
data->result = error;
return;
}
/* Copy in the magic string and send it by writing to the SMI port. */
strlcpy(data->buf, smist_magic, PAGE_SIZE);
__asm __volatile(
"movl $-1, %%edi\n\t"
"out %%al, (%%dx)\n"
: "=D" (data->result)
: "a" (data->command),
"b" (0),
"c" (0),
"d" (data->smi_cmd),
"S" ((uint32_t)segs[0].ds_addr)
);
}
static int
set_ownership(device_t dev)
{
struct smist_softc *sc;
struct set_ownership_data cb_data;
bus_dma_tag_t tag;
bus_dmamap_t map;
/*
* Specify the region to store the magic string. Since its address is
* passed to the BIOS in a 32-bit register, we have to make sure it is
* located in a physical page below 4 GB (i.e., for PAE.)
*/
sc = device_get_softc(dev);
if (bus_dma_tag_create(/*parent*/ NULL,
/*alignment*/ PAGE_SIZE, /*no boundary*/ 0,
/*lowaddr*/ BUS_SPACE_MAXADDR_32BIT, /*highaddr*/ BUS_SPACE_MAXADDR,
NULL, NULL, /*maxsize*/ PAGE_SIZE, /*segments*/ 1,
/*maxsegsize*/ PAGE_SIZE, 0, busdma_lock_mutex, &Giant,
&tag) != 0) {
device_printf(dev, "can't create mem tag\n");
return (ENXIO);
}
if (bus_dmamem_alloc(tag, &cb_data.buf, BUS_DMA_NOWAIT, &map) != 0) {
bus_dma_tag_destroy(tag);
device_printf(dev, "can't alloc mapped mem\n");
return (ENXIO);
}
/* Load the physical page map and take ownership in the callback. */
cb_data.smi_cmd = sc->smi_cmd;
cb_data.command = sc->command;
if (bus_dmamap_load(tag, map, cb_data.buf, PAGE_SIZE, set_ownership_cb,
&cb_data, BUS_DMA_NOWAIT) != 0) {
bus_dmamem_free(tag, cb_data.buf, map);
bus_dma_tag_destroy(tag);
device_printf(dev, "can't load mem\n");
return (ENXIO);
};
DPRINT(dev, "taking ownership over BIOS return %d\n", cb_data.result);
bus_dmamap_unload(tag, map);
bus_dmamem_free(tag, cb_data.buf, map);
bus_dma_tag_destroy(tag);
return (cb_data.result ? ENXIO : 0);
}
static int
getset_state(struct smist_softc *sc, int *state, int function)
{
int new_state;
int result;
int eax;
if (!sc)
return (ENXIO);
if (function != GET_STATE && function != SET_STATE)
return (EINVAL);
DPRINT(sc->dev, "calling GSI\n");
__asm __volatile(
"movl $-1, %%edi\n\t"
"out %%al, (%%dx)\n"
: "=a" (eax),
"=b" (new_state),
"=D" (result)
: "a" (sc->command),
"b" (function),
"c" (*state),
"d" (sc->smi_cmd)
);
DPRINT(sc->dev, "GSI returned: eax %.8x ebx %.8x edi %.8x\n",
eax, new_state, result);
*state = new_state & 1;
switch (function) {
case GET_STATE:
if (eax)
return (ENXIO);
break;
case SET_STATE:
if (result)
return (ENXIO);
break;
}
return (0);
}
static void
smist_identify(driver_t *driver, device_t parent)
{
struct piix4_pci_device *id;
device_t piix4 = NULL;
if (resource_disabled("ichst", 0))
return;
/* Check for a supported processor */
if (cpu_vendor_id != CPU_VENDOR_INTEL)
return;
switch (cpu_id & 0xff0) {
case 0x680: /* Pentium III [coppermine] */
case 0x6a0: /* Pentium III [Tualatin] */
break;
default:
return;
}
/* Check for a supported PCI-ISA bridge */
for (id = piix4_pci_devices; id->desc != NULL; ++id) {
if ((piix4 = pci_find_device(id->vendor, id->device)) != NULL)
break;
}
if (!piix4)
return;
if (bootverbose)
printf("smist: found supported isa bridge %s\n", id->desc);
if (device_find_child(parent, "smist", -1) != NULL)
return;
if (BUS_ADD_CHILD(parent, 30, "smist", -1) == NULL)
device_printf(parent, "smist: add child failed\n");
}
static int
smist_probe(device_t dev)
{
struct smist_softc *sc;
device_t ichss_dev, perf_dev;
int sig, smi_cmd, command, smi_data, flags;
int type;
int rv;
if (resource_disabled("smist", 0))
return (ENXIO);
sc = device_get_softc(dev);
/*
* If the ACPI perf or ICH SpeedStep drivers have attached and not
* just offering info, let them manage things.
*/
perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1);
if (perf_dev && device_is_attached(perf_dev)) {
rv = CPUFREQ_DRV_TYPE(perf_dev, &type);
if (rv == 0 && (type & CPUFREQ_FLAG_INFO_ONLY) == 0)
return (ENXIO);
}
ichss_dev = device_find_child(device_get_parent(dev), "ichss", -1);
if (ichss_dev && device_is_attached(ichss_dev))
return (ENXIO);
int15_gsic_call(&sig, &smi_cmd, &command, &smi_data, &flags);
if (bootverbose)
device_printf(dev, "sig %.8x smi_cmd %.4x command %.2x "
"smi_data %.4x flags %.8x\n",
sig, smi_cmd, command, smi_data, flags);
if (sig != -1) {
sc->smi_cmd = smi_cmd;
sc->smi_data = smi_data;
/*
* Sometimes int 15h 'GSIC' returns 0x80 for command, when
* it is actually 0x82. The Windows driver will overwrite
* this value given by the registry.
*/
if (command == 0x80) {
device_printf(dev,
"GSIC returned cmd 0x80, should be 0x82\n");
command = 0x82;
}
sc->command = (sig & 0xffffff00) | (command & 0xff);
sc->flags = flags;
} else {
/* Give some default values */
sc->smi_cmd = 0xb2;
sc->smi_data = 0xb3;
sc->command = 0x47534982;
sc->flags = 0;
}
device_set_desc(dev, "SpeedStep SMI");
return (-1500);
}
static int
smist_attach(device_t dev)
{
struct smist_softc *sc;
sc = device_get_softc(dev);
sc->dev = dev;
/* If we can't take ownership over BIOS, then bail out */
if (set_ownership(dev) != 0)
return (ENXIO);
/* Setup some defaults for our exported settings. */
sc->sets[0].freq = CPUFREQ_VAL_UNKNOWN;
sc->sets[0].volts = CPUFREQ_VAL_UNKNOWN;
sc->sets[0].power = CPUFREQ_VAL_UNKNOWN;
sc->sets[0].lat = 1000;
sc->sets[0].dev = dev;
sc->sets[1] = sc->sets[0];
cpufreq_register(dev);
return (0);
}
static int
smist_detach(device_t dev)
{
return (cpufreq_unregister(dev));
}
static int
smist_settings(device_t dev, struct cf_setting *sets, int *count)
{
struct smist_softc *sc;
struct cf_setting set;
int first, i;
if (sets == NULL || count == NULL)
return (EINVAL);
if (*count < 2) {
*count = 2;
return (E2BIG);
}
sc = device_get_softc(dev);
/*
* Estimate frequencies for both levels, temporarily switching to
* the other one if we haven't calibrated it yet.
*/
for (i = 0; i < 2; i++) {
if (sc->sets[i].freq == CPUFREQ_VAL_UNKNOWN) {
first = (i == 0) ? 1 : 0;
smist_set(dev, &sc->sets[i]);
smist_get(dev, &set);
smist_set(dev, &sc->sets[first]);
}
}
bcopy(sc->sets, sets, sizeof(sc->sets));
*count = 2;
return (0);
}
static int
smist_set(device_t dev, const struct cf_setting *set)
{
struct smist_softc *sc;
int rv, state, req_state, try;
/* Look up appropriate bit value based on frequency. */
sc = device_get_softc(dev);
if (CPUFREQ_CMP(set->freq, sc->sets[0].freq))
req_state = 0;
else if (CPUFREQ_CMP(set->freq, sc->sets[1].freq))
req_state = 1;
else
return (EINVAL);
DPRINT(dev, "requested setting %d\n", req_state);
rv = getset_state(sc, &state, GET_STATE);
if (state == req_state)
return (0);
try = 3;
do {
rv = getset_state(sc, &req_state, SET_STATE);
/* Sleep for 200 microseconds. This value is just a guess. */
if (rv)
DELAY(200);
} while (rv && --try);
DPRINT(dev, "set_state return %d, tried %d times\n",
rv, 4 - try);
return (rv);
}
static int
smist_get(device_t dev, struct cf_setting *set)
{
struct smist_softc *sc;
uint64_t rate;
int state;
int rv;
sc = device_get_softc(dev);
rv = getset_state(sc, &state, GET_STATE);
if (rv != 0)
return (rv);
/* If we haven't changed settings yet, estimate the current value. */
if (sc->sets[state].freq == CPUFREQ_VAL_UNKNOWN) {
cpu_est_clockrate(0, &rate);
sc->sets[state].freq = rate / 1000000;
DPRINT(dev, "get calibrated new rate of %d\n",
sc->sets[state].freq);
}
*set = sc->sets[state];
return (0);
}
static int
smist_type(device_t dev, int *type)
{
if (type == NULL)
return (EINVAL);
*type = CPUFREQ_TYPE_ABSOLUTE;
return (0);
}