| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/ciss/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/ciss/cissvar.h |
/*-
* Copyright (c) 2001 Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/ciss/cissvar.h 204648 2010-03-03 17:58:41Z mav $
*/
/*
* CISS adapter driver datastructures
*/
typedef STAILQ_HEAD(, ciss_request) cr_qhead_t;
/************************************************************************
* Tunable parameters
*/
/*
* There is no guaranteed upper bound on the number of concurrent
* commands an adapter may claim to support. Cap it at a reasonable
* value.
*/
#define CISS_MAX_REQUESTS 1024
/*
* Maximum number of logical drives we support.
*/
#define CISS_MAX_LOGICAL 15
/*
* Maximum number of physical devices we support.
*/
#define CISS_MAX_PHYSICAL 1024
/*
* Interrupt reduction can be controlled by tuning the interrupt
* coalesce delay and count paramters. The delay (in microseconds)
* defers delivery of interrupts to increase the chance of there being
* more than one completed command ready when the interrupt is
* delivered. The count expedites the delivery of the interrupt when
* the given number of commands are ready.
*
* If the delay is set to 0, interrupts are delivered immediately.
*/
#define CISS_INTERRUPT_COALESCE_DELAY 0
#define CISS_INTERRUPT_COALESCE_COUNT 16
/*
* Heartbeat routine timeout in seconds. Note that since event
* handling is performed on a callback basis, we don't need this to
* run very often.
*/
#define CISS_HEARTBEAT_RATE 10
/************************************************************************
* Compatibility with older versions of FreeBSD
*/
#if __FreeBSD_version < 440001
#warning testing old-FreeBSD compat
typedef struct proc d_thread_t;
#endif
/************************************************************************
* Driver version. Only really significant to the ACU interface.
*/
#define CISS_DRIVER_VERSION 20011201
/************************************************************************
* Driver data structures
*/
/*
* Each command issued to the adapter is managed by a request
* structure.
*/
struct ciss_request
{
STAILQ_ENTRY(ciss_request) cr_link;
int cr_onq; /* which queue we are on */
struct ciss_softc *cr_sc; /* controller softc */
void *cr_data; /* data buffer */
u_int32_t cr_length; /* data length */
bus_dmamap_t cr_datamap; /* DMA map for data */
struct ciss_command *cr_cc;
uint32_t cr_ccphys;
int cr_tag;
int cr_flags;
#define CISS_REQ_MAPPED (1<<0) /* data mapped */
#define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */
#define CISS_REQ_POLL (1<<2) /* submitter polling */
#define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */
#define CISS_REQ_DATAIN (1<<4) /* data adapter->host */
#define CISS_REQ_BUSY (1<<5) /* controller has req */
void (* cr_complete)(struct ciss_request *);
void *cr_private;
int cr_sg_tag;
#define CISS_SG_MAX ((CISS_SG_FETCH_MAX << 1) | 0x1)
#define CISS_SG_1 ((CISS_SG_FETCH_1 << 1) | 0x01)
#define CISS_SG_2 ((CISS_SG_FETCH_2 << 1) | 0x01)
#define CISS_SG_4 ((CISS_SG_FETCH_4 << 1) | 0x01)
#define CISS_SG_8 ((CISS_SG_FETCH_8 << 1) | 0x01)
#define CISS_SG_16 ((CISS_SG_FETCH_16 << 1) | 0x01)
#define CISS_SG_32 ((CISS_SG_FETCH_32 << 1) | 0x01)
#define CISS_SG_NONE ((CISS_SG_FETCH_NONE << 1) | 0x01)
};
/*
* The adapter command structure is defined with a zero-length
* scatter/gather list size. In practise, we want space for a
* scatter-gather list, and we also want to avoid having commands
* cross page boundaries.
*
* The size of the ciss_command is 52 bytes. 65 s/g elements are reserved
* to allow a max i/o size of 256k. This gives a total command size of
* 1120 bytes, including the 32 byte alignment padding. Modern controllers
* seem to saturate nicely at this value.
*/
#define CISS_MAX_SG_ELEMENTS 65
#define CISS_COMMAND_ALIGN 32
#define CISS_COMMAND_SG_LENGTH (sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS)
#define CISS_COMMAND_ALLOC_SIZE (roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN))
/*
* Per-logical-drive data.
*/
struct ciss_ldrive
{
union ciss_device_address cl_address;
union ciss_device_address *cl_controller;
int cl_status;
#define CISS_LD_NONEXISTENT 0
#define CISS_LD_ONLINE 1
#define CISS_LD_OFFLINE 2
int cl_update;
struct ciss_bmic_id_ldrive *cl_ldrive;
struct ciss_bmic_id_lstatus *cl_lstatus;
struct ciss_ldrive_geometry cl_geometry;
char cl_name[16]; /* device name */
};
/*
* Per-physical-drive data
*/
struct ciss_pdrive
{
union ciss_device_address cp_address;
int cp_online;
};
#define CISS_PHYSICAL_SHIFT 5
#define CISS_PHYSICAL_BASE (1 << CISS_PHYSICAL_SHIFT)
#define CISS_MAX_PHYSTGT 256
#define CISS_IS_PHYSICAL(bus) (bus >= CISS_PHYSICAL_BASE)
#define CISS_CAM_TO_PBUS(bus) (bus - CISS_PHYSICAL_BASE)
/*
* Per-adapter data
*/
struct ciss_softc
{
/* bus connections */
device_t ciss_dev; /* bus attachment */
struct cdev *ciss_dev_t; /* control device */
struct resource *ciss_regs_resource; /* register interface window */
int ciss_regs_rid; /* resource ID */
bus_space_handle_t ciss_regs_bhandle; /* bus space handle */
bus_space_tag_t ciss_regs_btag; /* bus space tag */
struct resource *ciss_cfg_resource; /* config struct interface window */
int ciss_cfg_rid; /* resource ID */
struct ciss_config_table *ciss_cfg; /* config table in adapter memory */
struct ciss_perf_config *ciss_perf; /* config table for the performant */
struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */
u_int32_t ciss_heartbeat; /* last heartbeat value */
int ciss_heart_attack; /* number of times we have seen this value */
int ciss_msi;
struct resource *ciss_irq_resource; /* interrupt */
int ciss_irq_rid[CISS_MSI_COUNT]; /* resource ID */
void *ciss_intr; /* interrupt handle */
bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */
bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */
u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */
uint64_t *ciss_reply;
int ciss_cycle;
int ciss_rqidx;
bus_dma_tag_t ciss_reply_dmat;
bus_dmamap_t ciss_reply_map;
uint32_t ciss_reply_phys;
int ciss_max_requests;
struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */
void *ciss_command; /* command structures */
bus_dma_tag_t ciss_command_dmat; /* command DMA tag */
bus_dmamap_t ciss_command_map; /* command DMA map */
u_int32_t ciss_command_phys; /* command array base address */
cr_qhead_t ciss_free; /* requests available for reuse */
cr_qhead_t ciss_notify; /* requests which are defered for processing */
struct proc *ciss_notify_thread;
struct callout ciss_periodic; /* periodic event handling */
struct ciss_request *ciss_periodic_notify; /* notify callback request */
struct mtx ciss_mtx;
struct ciss_ldrive **ciss_logical;
struct ciss_pdrive **ciss_physical;
union ciss_device_address *ciss_controllers; /* controller address */
int ciss_max_bus_number; /* maximum bus number */
int ciss_max_logical_bus;
int ciss_max_physical_bus;
struct cam_devq *ciss_cam_devq;
struct cam_sim **ciss_cam_sim;
int ciss_soft_reset;
int ciss_flags;
#define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */
#define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */
#define CISS_FLAG_ABORTING (1<<2) /* driver is going away */
#define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */
#define CISS_FLAG_BUSY (1<<4) /* no free commands */
#define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */
#define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */
#define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */
struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */
};
/************************************************************************
* Debugging/diagnostic output.
*/
/*
* Debugging levels:
* 0 - quiet, only emit warnings
* 1 - talkative, log major events, but nothing on the I/O path
* 2 - noisy, log events on the I/O path
* 3 - extremely noisy, log items in loops
*/
#ifdef CISS_DEBUG
# define debug(level, fmt, args...) \
do { \
if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \
} while(0)
# define debug_called(level) \
do { \
if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \
} while(0)
# define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s))
# define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s))
# define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s))
# define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f)))
# define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c);
#else
# define debug(level, fmt, args...)
# define debug_called(level)
# define debug_struct(s)
# define debug_union(s)
# define debug_type(s)
# define debug_field(s, f)
# define debug_const(c)
#endif
#define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args)
/************************************************************************
* Queue primitives
*/
#define CISSQ_ADD(sc, qname) \
do { \
struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \
\
qs->q_length++; \
if (qs->q_length > qs->q_max) \
qs->q_max = qs->q_length; \
} while(0)
#define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length--
#define CISSQ_INIT(sc, qname) \
do { \
sc->ciss_qstat[qname].q_length = 0; \
sc->ciss_qstat[qname].q_max = 0; \
} while(0)
#define CISSQ_REQUEST_QUEUE(name, index) \
static __inline void \
ciss_initq_ ## name (struct ciss_softc *sc) \
{ \
STAILQ_INIT(&sc->ciss_ ## name); \
CISSQ_INIT(sc, index); \
} \
static __inline void \
ciss_enqueue_ ## name (struct ciss_request *cr) \
{ \
\
STAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
CISSQ_ADD(cr->cr_sc, index); \
cr->cr_onq = index; \
} \
static __inline void \
ciss_requeue_ ## name (struct ciss_request *cr) \
{ \
\
STAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
CISSQ_ADD(cr->cr_sc, index); \
cr->cr_onq = index; \
} \
static __inline struct ciss_request * \
ciss_dequeue_ ## name (struct ciss_softc *sc) \
{ \
struct ciss_request *cr; \
\
if ((cr = STAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \
STAILQ_REMOVE_HEAD(&sc->ciss_ ## name, cr_link); \
CISSQ_REMOVE(sc, index); \
cr->cr_onq = -1; \
} \
return(cr); \
} \
struct hack
CISSQ_REQUEST_QUEUE(free, CISSQ_FREE);
CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY);
static __inline void
ciss_enqueue_complete(struct ciss_request *ac, cr_qhead_t *head)
{
STAILQ_INSERT_TAIL(head, ac, cr_link);
}
static __inline struct ciss_request *
ciss_dequeue_complete(struct ciss_softc *sc, cr_qhead_t *head)
{
struct ciss_request *ac;
if ((ac = STAILQ_FIRST(head)) != NULL)
STAILQ_REMOVE_HEAD(head, cr_link);
return(ac);
}
/********************************************************************************
* space-fill a character string
*/
static __inline void
padstr(char *targ, const char *src, int len)
{
while (len-- > 0) {
if (*src != 0) {
*targ++ = *src++;
} else {
*targ++ = ' ';
}
}
}
#define ciss_report_request(a, b, c) \
_ciss_report_request(a, b, c, __FUNCTION__)