| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/nxge/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/nxge/include/xgehal-fifo.h |
/*-
* Copyright (c) 2002-2007 Neterion, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/nxge/include/xgehal-fifo.h 173139 2007-10-29 14:19:32Z rwatson $
*/
#ifndef XGE_HAL_FIFO_H
#define XGE_HAL_FIFO_H
#include <dev/nxge/include/xgehal-channel.h>
#include <dev/nxge/include/xgehal-config.h>
#include <dev/nxge/include/xgehal-mm.h>
__EXTERN_BEGIN_DECLS
/* HW fifo configuration */
#define XGE_HAL_FIFO_INT_PER_LIST_THRESHOLD 65
#define XGE_HAL_FIFO_MAX_WRR 5
#define XGE_HAL_FIFO_MAX_PARTITION 4
#define XGE_HAL_FIFO_MAX_WRR_STATE 36
#define XGE_HAL_FIFO_HW_PAIR_OFFSET 0x20000
/* HW FIFO Weight Calender */
#define XGE_HAL_FIFO_WRR_0 0x0706050407030602ULL
#define XGE_HAL_FIFO_WRR_1 0x0507040601070503ULL
#define XGE_HAL_FIFO_WRR_2 0x0604070205060700ULL
#define XGE_HAL_FIFO_WRR_3 0x0403060705010207ULL
#define XGE_HAL_FIFO_WRR_4 0x0604050300000000ULL
/*
* xge_hal_fifo_hw_pair_t
*
* Represent a single fifo in the BAR1 memory space.
*/
typedef struct {
u64 txdl_pointer; /* offset 0x0 */
u64 reserved[2];
u64 list_control; /* offset 0x18 */
#define XGE_HAL_TX_FIFO_LAST_TXD_NUM( val) vBIT(val,0,8)
#define XGE_HAL_TX_FIFO_FIRST_LIST BIT(14)
#define XGE_HAL_TX_FIFO_LAST_LIST BIT(15)
#define XGE_HAL_TX_FIFO_FIRSTNLAST_LIST vBIT(3,14,2)
#define XGE_HAL_TX_FIFO_SPECIAL_FUNC BIT(23)
#define XGE_HAL_TX_FIFO_NO_SNOOP(n) vBIT(n,30,2)
} xge_hal_fifo_hw_pair_t;
/* Bad TxDL transfer codes */
#define XGE_HAL_TXD_T_CODE_OK 0x0
#define XGE_HAL_TXD_T_CODE_UNUSED_1 0x1
#define XGE_HAL_TXD_T_CODE_ABORT_BUFFER 0x2
#define XGE_HAL_TXD_T_CODE_ABORT_DTOR 0x3
#define XGE_HAL_TXD_T_CODE_UNUSED_5 0x5
#define XGE_HAL_TXD_T_CODE_PARITY 0x7
#define XGE_HAL_TXD_T_CODE_LOSS_OF_LINK 0xA
#define XGE_HAL_TXD_T_CODE_GENERAL_ERR 0xF
/**
* struct xge_hal_fifo_txd_t - TxD.
* @control_1: Control_1.
* @control_2: Control_2.
* @buffer_pointer: Buffer_Address.
* @host_control: Host_Control.Opaque 64bit data stored by ULD inside the Xframe
* descriptor prior to posting the latter on the channel
* via xge_hal_fifo_dtr_post() or xge_hal_ring_dtr_post().
* The %host_control is returned as is to the ULD with each
* completed descriptor.
*
* Transmit descriptor (TxD).Fifo descriptor contains configured number
* (list) of TxDs. * For more details please refer to Xframe User Guide,
* Section 5.4.2 "Transmit Descriptor (TxD) Format".
*/
typedef struct xge_hal_fifo_txd_t {
u64 control_1;
#define XGE_HAL_TXD_LIST_OWN_XENA BIT(7)
#define XGE_HAL_TXD_T_CODE (BIT(12)|BIT(13)|BIT(14)|BIT(15))
#define XGE_HAL_GET_TXD_T_CODE(val) ((val & XGE_HAL_TXD_T_CODE)>>48)
#define XGE_HAL_SET_TXD_T_CODE(x, val) (x |= (((u64)val & 0xF) << 48))
#define XGE_HAL_TXD_GATHER_CODE (BIT(22) | BIT(23))
#define XGE_HAL_TXD_GATHER_CODE_FIRST BIT(22)
#define XGE_HAL_TXD_GATHER_CODE_LAST BIT(23)
#define XGE_HAL_TXD_NO_LSO 0
#define XGE_HAL_TXD_UDF_COF 1
#define XGE_HAL_TXD_TCP_LSO 2
#define XGE_HAL_TXD_UDP_LSO 3
#define XGE_HAL_TXD_LSO_COF_CTRL(val) vBIT(val,30,2)
#define XGE_HAL_TXD_TCP_LSO_MSS(val) vBIT(val,34,14)
#define XGE_HAL_TXD_BUFFER0_SIZE(val) vBIT(val,48,16)
#define XGE_HAL_TXD_GET_LSO_BYTES_SENT(val) ((val & vBIT(0xFFFF,16,16))>>32)
u64 control_2;
#define XGE_HAL_TXD_TX_CKO_CONTROL (BIT(5)|BIT(6)|BIT(7))
#define XGE_HAL_TXD_TX_CKO_IPV4_EN BIT(5)
#define XGE_HAL_TXD_TX_CKO_TCP_EN BIT(6)
#define XGE_HAL_TXD_TX_CKO_UDP_EN BIT(7)
#define XGE_HAL_TXD_VLAN_ENABLE BIT(15)
#define XGE_HAL_TXD_VLAN_TAG(val) vBIT(val,16,16)
#define XGE_HAL_TXD_INT_NUMBER(val) vBIT(val,34,6)
#define XGE_HAL_TXD_INT_TYPE_PER_LIST BIT(47)
#define XGE_HAL_TXD_INT_TYPE_UTILZ BIT(46)
#define XGE_HAL_TXD_SET_MARKER vBIT(0x6,0,4)
u64 buffer_pointer;
u64 host_control;
} xge_hal_fifo_txd_t;
typedef xge_hal_fifo_txd_t* xge_hal_fifo_txdl_t;
/**
* struct xge_hal_fifo_t - Fifo channel.
* @channel: Channel "base" of this fifo, the common part of all HAL
* channels.
* @post_lock_ptr: Points to a lock that serializes (pointer, control) PIOs.
* Note that for Xena the serialization is done across all device
* fifos.
* @hw_pair: Per-fifo (Pointer, Control) pair used to send descriptors to the
* Xframe hardware (for details see Xframe user guide).
* @config: Fifo configuration, part of device configuration
* (see xge_hal_device_config_t{}).
* @no_snoop_bits: See xge_hal_fifo_config_t{}.
* @txdl_per_memblock: Number of TxDLs (TxD lists) per memblock.
* on TxDL please refer to Xframe UG.
* @interrupt_type: FIXME: to-be-defined.
* @txdl_size: Configured TxDL size (i.e., number of TxDs in a list), plus
* per-TxDL HAL private space (xge_hal_fifo_txdl_priv_t).
* @priv_size: Per-Tx descriptor space reserved for upper-layer driver
* usage.
* @mempool: Memory pool, from which descriptors get allocated.
* @align_size: TBD
*
* Fifo channel.
* Note: The structure is cache line aligned.
*/
typedef struct xge_hal_fifo_t {
xge_hal_channel_t channel;
spinlock_t *post_lock_ptr;
xge_hal_fifo_hw_pair_t *hw_pair;
xge_hal_fifo_config_t *config;
int no_snoop_bits;
int txdl_per_memblock;
u64 interrupt_type;
int txdl_size;
int priv_size;
xge_hal_mempool_t *mempool;
int align_size;
} __xge_os_attr_cacheline_aligned xge_hal_fifo_t;
/**
* struct xge_hal_fifo_txdl_priv_t - Transmit descriptor HAL-private
* data.
* @dma_addr: DMA (mapped) address of _this_ descriptor.
* @dma_handle: DMA handle used to map the descriptor onto device.
* @dma_offset: Descriptor's offset in the memory block. HAL allocates
* descriptors in memory blocks (see
* xge_hal_fifo_config_t{})
* Each memblock is a contiguous block of DMA-able memory.
* @frags: Total number of fragments (that is, contiguous data buffers)
* carried by this TxDL.
* @align_vaddr_start: (TODO).
* @align_vaddr: Virtual address of the per-TxDL area in memory used for
* alignement. Used to place one or more mis-aligned fragments
* (the maximum defined by configration variable
* @max_aligned_frags).
* @align_dma_addr: DMA address translated from the @align_vaddr.
* @align_dma_handle: DMA handle that corresponds to @align_dma_addr.
* @align_dma_acch: DMA access handle corresponds to @align_dma_addr.
* @align_dma_offset: The current offset into the @align_vaddr area.
* Grows while filling the descriptor, gets reset.
* @align_used_frags: (TODO).
* @alloc_frags: Total number of fragments allocated.
* @dang_frags: Number of fragments kept from release until this TxDL is freed.
* @bytes_sent: TODO
* @unused: TODO
* @dang_txdl: (TODO).
* @next_txdl_priv: (TODO).
* @first_txdp: (TODO).
* @dang_dtrh: Pointer to TxDL (list) kept from release until this TxDL
* is freed.
* @linked_txdl_priv: Pointer to any linked TxDL for creating contiguous
* TxDL list.
* @dtrh: Corresponding dtrh to this TxDL.
* @memblock: Pointer to the TxDL memory block or memory page.
* on the next send operation.
* @dma_object: DMA address and handle of the memory block that contains
* the descriptor. This member is used only in the "checked"
* version of the HAL (to enforce certain assertions);
* otherwise it gets compiled out.
* @allocated: True if the descriptor is reserved, 0 otherwise. Internal usage.
*
* Per-transmit decsriptor HAL-private data. HAL uses the space to keep DMA
* information associated with the descriptor. Note that ULD can ask HAL
* to allocate additional per-descriptor space for its own (ULD-specific)
* purposes.
*
* See also: xge_hal_ring_rxd_priv_t{}.
*/
typedef struct xge_hal_fifo_txdl_priv_t {
dma_addr_t dma_addr;
pci_dma_h dma_handle;
ptrdiff_t dma_offset;
int frags;
char *align_vaddr_start;
char *align_vaddr;
dma_addr_t align_dma_addr;
pci_dma_h align_dma_handle;
pci_dma_acc_h align_dma_acch;
ptrdiff_t align_dma_offset;
int align_used_frags;
int alloc_frags;
int dang_frags;
unsigned int bytes_sent;
int unused;
xge_hal_fifo_txd_t *dang_txdl;
struct xge_hal_fifo_txdl_priv_t *next_txdl_priv;
xge_hal_fifo_txd_t *first_txdp;
void *memblock;
#ifdef XGE_DEBUG_ASSERT
xge_hal_mempool_dma_t *dma_object;
#endif
#ifdef XGE_OS_MEMORY_CHECK
int allocated;
#endif
} xge_hal_fifo_txdl_priv_t;
/**
* xge_hal_fifo_get_max_frags_cnt - Return the max fragments allocated
* for the fifo.
* @channelh: Channel handle.
*/
static inline int
xge_hal_fifo_get_max_frags_cnt(xge_hal_channel_h channelh)
{
return ((xge_hal_fifo_t *)channelh)->config->max_frags;
}
/* ========================= FIFO PRIVATE API ============================= */
xge_hal_status_e __hal_fifo_open(xge_hal_channel_h channelh,
xge_hal_channel_attr_t *attr);
void __hal_fifo_close(xge_hal_channel_h channelh);
void __hal_fifo_hw_initialize(xge_hal_device_h hldev);
xge_hal_status_e
__hal_fifo_dtr_align_alloc_map(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
void
__hal_fifo_dtr_align_free_unmap(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
#if defined(XGE_DEBUG_FP) && (XGE_DEBUG_FP & XGE_DEBUG_FP_FIFO)
#define __HAL_STATIC_FIFO
#define __HAL_INLINE_FIFO
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_fifo_txdl_priv_t*
__hal_fifo_txdl_priv(xge_hal_dtr_h dtrh);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
__hal_fifo_dtr_post_single(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
u64 ctrl_1);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
__hal_fifo_txdl_restore_many(xge_hal_channel_h channelh,
xge_hal_fifo_txd_t *txdp, int txdl_count);
/* ========================= FIFO PUBLIC API ============================== */
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_reserve(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_reserve_many(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh,
const int frags);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void*
xge_hal_fifo_dtr_private(xge_hal_dtr_h dtrh);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO int
xge_hal_fifo_dtr_buffer_cnt(xge_hal_dtr_h dtrh);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_reserve_sp(xge_hal_channel_h channel, int dtr_sp_size,
xge_hal_dtr_h dtr_sp);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_post(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_post_many(xge_hal_channel_h channelh, int num,
xge_hal_dtr_h dtrs[]);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_next_completed(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh,
u8 *t_code);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_free(xge_hal_channel_h channelh, xge_hal_dtr_h dtr);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_buffer_set(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
int frag_idx, dma_addr_t dma_pointer, int size);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_buffer_set_aligned(xge_hal_channel_h channelh,
xge_hal_dtr_h dtrh, int frag_idx, void *vaddr,
dma_addr_t dma_pointer, int size, int misaligned_size);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_dtr_buffer_append(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
void *vaddr, int size);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_buffer_finalize(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
int frag_idx);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_mss_set(xge_hal_dtr_h dtrh, int mss);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_cksum_set_bits(xge_hal_dtr_h dtrh, u64 cksum_bits);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO void
xge_hal_fifo_dtr_vlan_set(xge_hal_dtr_h dtrh, u16 vlan_tag);
__HAL_STATIC_FIFO __HAL_INLINE_FIFO xge_hal_status_e
xge_hal_fifo_is_next_dtr_completed(xge_hal_channel_h channelh);
#else /* XGE_FASTPATH_EXTERN */
#define __HAL_STATIC_FIFO static
#define __HAL_INLINE_FIFO inline
#include <dev/nxge/xgehal/xgehal-fifo-fp.c>
#endif /* XGE_FASTPATH_INLINE */
__EXTERN_END_DECLS
#endif /* XGE_HAL_FIFO_H */