| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/vx/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/vx/if_vx.c |
/*-
* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Herb Peyerl.
* 4. The name of Herb Peyerl may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/vx/if_vx.c 207554 2010-05-03 07:32:50Z sobomax $");
/*
* Created from if_ep.c driver by Fred Gray (fgray@rice.edu) to support
* the 3c590 family.
*/
/*
* Modified from the FreeBSD 1.1.5.1 version by:
* Andres Vega Garcia
* INRIA - Sophia Antipolis, France
* avega@sophia.inria.fr
*/
/*
* Promiscuous mode added and interrupt logic slightly changed
* to reduce the number of adapter failures. Transceiver select
* logic changed to use value from EEPROM. Autoconfiguration
* features added.
* Done by:
* Serge Babkin
* Chelindbank (Chelyabinsk, Russia)
* babkin@hq.icb.chel.su
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <machine/bus.h>
#include <sys/bus.h>
#include <net/bpf.h>
#include <dev/vx/if_vxreg.h>
#include <dev/vx/if_vxvar.h>
#define ETHER_MAX_LEN 1518
#define ETHER_ADDR_LEN 6
#define ETHER_ALIGN 2
static struct connector_entry {
int bit;
char *name;
} conn_tab[VX_CONNECTORS] = {
#define CONNECTOR_UTP 0
{
0x08, "utp"
},
#define CONNECTOR_AUI 1
{
0x20, "aui"
},
/* dummy */
{
0, "???"
},
#define CONNECTOR_BNC 3
{
0x10, "bnc"
},
#define CONNECTOR_TX 4
{
0x02, "tx"
},
#define CONNECTOR_FX 5
{
0x04, "fx"
},
#define CONNECTOR_MII 6
{
0x40, "mii"
},
{
0, "???"
}
};
static void vx_txstat(struct vx_softc *);
static int vx_status(struct vx_softc *);
static void vx_init(void *);
static void vx_init_locked(struct vx_softc *);
static int vx_ioctl(struct ifnet *, u_long, caddr_t);
static void vx_start(struct ifnet *);
static void vx_start_locked(struct ifnet *);
static void vx_watchdog(void *);
static void vx_reset(struct vx_softc *);
static void vx_read(struct vx_softc *);
static struct mbuf *vx_get(struct vx_softc *, u_int);
static void vx_mbuf_fill(void *);
static void vx_mbuf_empty(struct vx_softc *);
static void vx_setfilter(struct vx_softc *);
static void vx_getlink(struct vx_softc *);
static void vx_setlink(struct vx_softc *);
int
vx_attach(device_t dev)
{
struct vx_softc *sc = device_get_softc(dev);
struct ifnet *ifp;
int i;
u_char eaddr[6];
ifp = sc->vx_ifp = if_alloc(IFT_ETHER);
if (ifp == NULL) {
device_printf(dev, "can not if_alloc()\n");
return 0;
}
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
mtx_init(&sc->vx_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF);
callout_init_mtx(&sc->vx_callout, &sc->vx_mtx, 0);
callout_init_mtx(&sc->vx_watchdog, &sc->vx_mtx, 0);
GO_WINDOW(0);
CSR_WRITE_2(sc, VX_COMMAND, GLOBAL_RESET);
VX_BUSY_WAIT;
vx_getlink(sc);
/*
* Read the station address from the eeprom
*/
GO_WINDOW(0);
for (i = 0; i < 3; i++) {
int x;
if (vx_busy_eeprom(sc)) {
mtx_destroy(&sc->vx_mtx);
if_free(ifp);
return 0;
}
CSR_WRITE_2(sc, VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD
| (EEPROM_OEM_ADDR0 + i));
if (vx_busy_eeprom(sc)) {
mtx_destroy(&sc->vx_mtx);
if_free(ifp);
return 0;
}
x = CSR_READ_2(sc, VX_W0_EEPROM_DATA);
eaddr[(i << 1)] = x >> 8;
eaddr[(i << 1) + 1] = x;
}
ifp->if_mtu = ETHERMTU;
ifp->if_snd.ifq_maxlen = ifqmaxlen;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_start = vx_start;
ifp->if_ioctl = vx_ioctl;
ifp->if_init = vx_init;
ifp->if_softc = sc;
ether_ifattach(ifp, eaddr);
sc->vx_tx_start_thresh = 20; /* probably a good starting point. */
VX_LOCK(sc);
vx_stop(sc);
VX_UNLOCK(sc);
return 1;
}
/*
* The order in here seems important. Otherwise we may not receive
* interrupts. ?!
*/
static void
vx_init(void *xsc)
{
struct vx_softc *sc = (struct vx_softc *)xsc;
VX_LOCK(sc);
vx_init_locked(sc);
VX_UNLOCK(sc);
}
static void
vx_init_locked(struct vx_softc *sc)
{
struct ifnet *ifp = sc->vx_ifp;
int i;
VX_LOCK_ASSERT(sc);
VX_BUSY_WAIT;
GO_WINDOW(2);
for (i = 0; i < 6; i++) /* Reload the ether_addr. */
CSR_WRITE_1(sc, VX_W2_ADDR_0 + i, IF_LLADDR(sc->vx_ifp)[i]);
CSR_WRITE_2(sc, VX_COMMAND, RX_RESET);
VX_BUSY_WAIT;
CSR_WRITE_2(sc, VX_COMMAND, TX_RESET);
VX_BUSY_WAIT;
GO_WINDOW(1); /* Window 1 is operating window */
for (i = 0; i < 31; i++)
CSR_READ_1(sc, VX_W1_TX_STATUS);
CSR_WRITE_2(sc, VX_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE |
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
CSR_WRITE_2(sc, VX_COMMAND, SET_INTR_MASK | S_CARD_FAILURE |
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
/*
* Attempt to get rid of any stray interrupts that occured during
* configuration. On the i386 this isn't possible because one may
* already be queued. However, a single stray interrupt is
* unimportant.
*/
CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | 0xff);
vx_setfilter(sc);
vx_setlink(sc);
CSR_WRITE_2(sc, VX_COMMAND, RX_ENABLE);
CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE);
vx_mbuf_fill(sc);
/* Interface is now `running', with no output active. */
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
callout_reset(&sc->vx_watchdog, hz, vx_watchdog, sc);
/* Attempt to start output, if any. */
vx_start_locked(ifp);
}
static void
vx_setfilter(struct vx_softc *sc)
{
struct ifnet *ifp = sc->vx_ifp;
VX_LOCK_ASSERT(sc);
GO_WINDOW(1); /* Window 1 is operating window */
CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER |
FIL_INDIVIDUAL | FIL_BRDCST | FIL_MULTICAST |
((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0));
}
static void
vx_getlink(struct vx_softc *sc)
{
int n, k;
GO_WINDOW(3);
sc->vx_connectors = CSR_READ_2(sc, VX_W3_RESET_OPT) & 0x7f;
for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
if (sc->vx_connectors & conn_tab[k].bit) {
if (n > 0)
printf("/");
printf("%s", conn_tab[k].name);
n++;
}
}
if (sc->vx_connectors == 0) {
printf("no connectors!\n");
return;
}
GO_WINDOW(3);
sc->vx_connector =
(CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & INTERNAL_CONNECTOR_MASK)
>> INTERNAL_CONNECTOR_BITS;
if (sc->vx_connector & 0x10) {
sc->vx_connector &= 0x0f;
printf("[*%s*]", conn_tab[(int)sc->vx_connector].name);
printf(": disable 'auto select' with DOS util!\n");
} else {
printf("[*%s*]\n", conn_tab[(int)sc->vx_connector].name);
}
}
static void
vx_setlink(struct vx_softc *sc)
{
struct ifnet *ifp = sc->vx_ifp;
int i, j, k;
char *reason, *warning;
static int prev_flags;
static signed char prev_conn = -1;
VX_LOCK_ASSERT(sc);
if (prev_conn == -1)
prev_conn = sc->vx_connector;
/*
* S.B.
*
* Now behavior was slightly changed:
*
* if any of flags link[0-2] is used and its connector is
* physically present the following connectors are used:
*
* link0 - AUI * highest precedence
* link1 - BNC
* link2 - UTP * lowest precedence
*
* If none of them is specified then
* connector specified in the EEPROM is used
* (if present on card or UTP if not).
*/
i = sc->vx_connector; /* default in EEPROM */
reason = "default";
warning = 0;
if (ifp->if_flags & IFF_LINK0) {
if (sc->vx_connectors & conn_tab[CONNECTOR_AUI].bit) {
i = CONNECTOR_AUI;
reason = "link0";
} else {
warning = "aui not present! (link0)";
}
} else if (ifp->if_flags & IFF_LINK1) {
if (sc->vx_connectors & conn_tab[CONNECTOR_BNC].bit) {
i = CONNECTOR_BNC;
reason = "link1";
} else {
warning = "bnc not present! (link1)";
}
} else if (ifp->if_flags & IFF_LINK2) {
if (sc->vx_connectors & conn_tab[CONNECTOR_UTP].bit) {
i = CONNECTOR_UTP;
reason = "link2";
} else {
warning = "utp not present! (link2)";
}
} else if ((sc->vx_connectors & conn_tab[(int)sc->vx_connector].bit) == 0) {
warning = "strange connector type in EEPROM.";
reason = "forced";
i = CONNECTOR_UTP;
}
/* Avoid unnecessary message. */
k = (prev_flags ^ ifp->if_flags) & (IFF_LINK0 | IFF_LINK1 | IFF_LINK2);
if ((k != 0) || (prev_conn != i)) {
if (warning != NULL)
if_printf(ifp, "warning: %s\n", warning);
if_printf(ifp, "selected %s. (%s)\n", conn_tab[i].name, reason);
}
/* Set the selected connector. */
GO_WINDOW(3);
j = CSR_READ_4(sc, VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
CSR_WRITE_4(sc, VX_W3_INTERNAL_CFG, j | (i << INTERNAL_CONNECTOR_BITS));
/* First, disable all. */
CSR_WRITE_2(sc, VX_COMMAND, STOP_TRANSCEIVER);
DELAY(800);
GO_WINDOW(4);
CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, 0);
/* Second, enable the selected one. */
switch (i) {
case CONNECTOR_UTP:
GO_WINDOW(4);
CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, ENABLE_UTP);
break;
case CONNECTOR_BNC:
CSR_WRITE_2(sc, VX_COMMAND, START_TRANSCEIVER);
DELAY(800);
break;
case CONNECTOR_TX:
case CONNECTOR_FX:
GO_WINDOW(4);
CSR_WRITE_2(sc, VX_W4_MEDIA_TYPE, LINKBEAT_ENABLE);
break;
default: /* AUI and MII fall here */
break;
}
GO_WINDOW(1);
prev_flags = ifp->if_flags;
prev_conn = i;
}
static void
vx_start(struct ifnet *ifp)
{
struct vx_softc *sc = ifp->if_softc;
VX_LOCK(sc);
vx_start_locked(ifp);
VX_UNLOCK(sc);
}
static void
vx_start_locked(struct ifnet *ifp)
{
struct vx_softc *sc = ifp->if_softc;
struct mbuf *m;
int len, pad;
VX_LOCK_ASSERT(sc);
/* Don't transmit if interface is busy or not running */
if ((sc->vx_ifp->if_drv_flags &
(IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != IFF_DRV_RUNNING)
return;
startagain:
/* Sneak a peek at the next packet */
m = ifp->if_snd.ifq_head;
if (m == NULL) {
return;
}
/* We need to use m->m_pkthdr.len, so require the header */
M_ASSERTPKTHDR(m);
len = m->m_pkthdr.len;
pad = (4 - len) & 3;
/*
* The 3c509 automatically pads short packets to minimum ethernet
* length, but we drop packets that are too large. Perhaps we should
* truncate them instead?
*/
if (len + pad > ETHER_MAX_LEN) {
/* packet is obviously too large: toss it */
++ifp->if_oerrors;
IF_DEQUEUE(&ifp->if_snd, m);
m_freem(m);
goto readcheck;
}
VX_BUSY_WAIT;
if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) {
CSR_WRITE_2(sc, VX_COMMAND,
SET_TX_AVAIL_THRESH | ((len + pad + 4) >> 2));
/* not enough room in FIFO - make sure */
if (CSR_READ_2(sc, VX_W1_FREE_TX) < len + pad + 4) {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
sc->vx_timer = 1;
return;
}
}
CSR_WRITE_2(sc, VX_COMMAND, SET_TX_AVAIL_THRESH | (8188 >> 2));
IF_DEQUEUE(&ifp->if_snd, m);
if (m == NULL) /* not really needed */
return;
VX_BUSY_WAIT;
CSR_WRITE_2(sc, VX_COMMAND, SET_TX_START_THRESH |
((len / 4 + sc->vx_tx_start_thresh) >> 2));
BPF_MTAP(sc->vx_ifp, m);
/*
* Do the output at splhigh() so that an interrupt from another device
* won't cause a FIFO underrun.
*
* XXX: Can't enforce that anymore.
*/
CSR_WRITE_4(sc, VX_W1_TX_PIO_WR_1, len | TX_INDICATE);
while (m) {
if (m->m_len > 3)
bus_space_write_multi_4(sc->vx_bst, sc->vx_bsh,
VX_W1_TX_PIO_WR_1, (u_int32_t *)mtod(m, caddr_t),
m->m_len / 4);
if (m->m_len & 3)
bus_space_write_multi_1(sc->vx_bst, sc->vx_bsh,
VX_W1_TX_PIO_WR_1,
mtod(m, caddr_t) + (m->m_len & ~3), m->m_len & 3);
m = m_free(m);
}
while (pad--)
CSR_WRITE_1(sc, VX_W1_TX_PIO_WR_1, 0); /* Padding */
++ifp->if_opackets;
sc->vx_timer = 1;
readcheck:
if ((CSR_READ_2(sc, VX_W1_RX_STATUS) & ERR_INCOMPLETE) == 0) {
/* We received a complete packet. */
if ((CSR_READ_2(sc, VX_STATUS) & S_INTR_LATCH) == 0) {
/*
* No interrupt, read the packet and continue
* Is this supposed to happen? Is my motherboard
* completely busted?
*/
vx_read(sc);
} else
/*
* Got an interrupt, return so that it gets
* serviced.
*/
return;
} else {
/* Check if we are stuck and reset [see XXX comment] */
if (vx_status(sc)) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "adapter reset\n");
vx_reset(sc);
}
}
goto startagain;
}
/*
* XXX: The 3c509 card can get in a mode where both the fifo status bit
* FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set
* We detect this situation and we reset the adapter.
* It happens at times when there is a lot of broadcast traffic
* on the cable (once in a blue moon).
*/
static int
vx_status(struct vx_softc *sc)
{
struct ifnet *ifp;
int fifost;
VX_LOCK_ASSERT(sc);
/*
* Check the FIFO status and act accordingly
*/
GO_WINDOW(4);
fifost = CSR_READ_2(sc, VX_W4_FIFO_DIAG);
GO_WINDOW(1);
ifp = sc->vx_ifp;
if (fifost & FIFOS_RX_UNDERRUN) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "RX underrun\n");
vx_reset(sc);
return 0;
}
if (fifost & FIFOS_RX_STATUS_OVERRUN) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "RX Status overrun\n");
return 1;
}
if (fifost & FIFOS_RX_OVERRUN) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "RX overrun\n");
return 1;
}
if (fifost & FIFOS_TX_OVERRUN) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "TX overrun\n");
vx_reset(sc);
return 0;
}
return 0;
}
static void
vx_txstat(struct vx_softc *sc)
{
struct ifnet *ifp;
int i;
VX_LOCK_ASSERT(sc);
/*
* We need to read+write TX_STATUS until we get a 0 status
* in order to turn off the interrupt flag.
*/
ifp = sc->vx_ifp;
while ((i = CSR_READ_1(sc, VX_W1_TX_STATUS)) & TXS_COMPLETE) {
CSR_WRITE_1(sc, VX_W1_TX_STATUS, 0x0);
if (i & TXS_JABBER) {
++ifp->if_oerrors;
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "jabber (%x)\n", i);
vx_reset(sc);
} else if (i & TXS_UNDERRUN) {
++ifp->if_oerrors;
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "fifo underrun (%x) @%d\n", i,
sc->vx_tx_start_thresh);
if (sc->vx_tx_succ_ok < 100)
sc->vx_tx_start_thresh =
min(ETHER_MAX_LEN,
sc->vx_tx_start_thresh + 20);
sc->vx_tx_succ_ok = 0;
vx_reset(sc);
} else if (i & TXS_MAX_COLLISION) {
++ifp->if_collisions;
CSR_WRITE_2(sc, VX_COMMAND, TX_ENABLE);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
} else
sc->vx_tx_succ_ok = (sc->vx_tx_succ_ok + 1) & 127;
}
}
void
vx_intr(void *voidsc)
{
short status;
struct vx_softc *sc = voidsc;
struct ifnet *ifp = sc->vx_ifp;
VX_LOCK(sc);
for (;;) {
CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH);
status = CSR_READ_2(sc, VX_STATUS);
if ((status & (S_TX_COMPLETE | S_TX_AVAIL |
S_RX_COMPLETE | S_CARD_FAILURE)) == 0)
break;
/*
* Acknowledge any interrupts. It's important that we do this
* first, since there would otherwise be a race condition.
* Due to the i386 interrupt queueing, we may get spurious
* interrupts occasionally.
*/
CSR_WRITE_2(sc, VX_COMMAND, ACK_INTR | status);
if (status & S_RX_COMPLETE)
vx_read(sc);
if (status & S_TX_AVAIL) {
sc->vx_timer = 0;
sc->vx_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
vx_start_locked(sc->vx_ifp);
}
if (status & S_CARD_FAILURE) {
if_printf(ifp, "adapter failure (%x)\n", status);
sc->vx_timer = 0;
vx_reset(sc);
break;
}
if (status & S_TX_COMPLETE) {
sc->vx_timer = 0;
vx_txstat(sc);
vx_start_locked(ifp);
}
}
VX_UNLOCK(sc);
/* no more interrupts */
return;
}
static void
vx_read(struct vx_softc *sc)
{
struct ifnet *ifp = sc->vx_ifp;
struct mbuf *m;
struct ether_header *eh;
u_int len;
VX_LOCK_ASSERT(sc);
len = CSR_READ_2(sc, VX_W1_RX_STATUS);
again:
if (ifp->if_flags & IFF_DEBUG) {
int err = len & ERR_MASK;
char *s = NULL;
if (len & ERR_INCOMPLETE)
s = "incomplete packet";
else if (err == ERR_OVERRUN)
s = "packet overrun";
else if (err == ERR_RUNT)
s = "runt packet";
else if (err == ERR_ALIGNMENT)
s = "bad alignment";
else if (err == ERR_CRC)
s = "bad crc";
else if (err == ERR_OVERSIZE)
s = "oversized packet";
else if (err == ERR_DRIBBLE)
s = "dribble bits";
if (s)
if_printf(ifp, "%s\n", s);
}
if (len & ERR_INCOMPLETE)
return;
if (len & ERR_RX) {
++ifp->if_ierrors;
goto abort;
}
len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
/* Pull packet off interface. */
m = vx_get(sc, len);
if (m == 0) {
ifp->if_ierrors++;
goto abort;
}
++ifp->if_ipackets;
{
struct mbuf *m0;
m0 = m_devget(mtod(m, char *), m->m_pkthdr.len, ETHER_ALIGN,
ifp, NULL);
if (m0 == NULL) {
ifp->if_ierrors++;
goto abort;
}
m_freem(m);
m = m0;
}
/* We assume the header fit entirely in one mbuf. */
eh = mtod(m, struct ether_header *);
/*
* XXX: Some cards seem to be in promiscous mode all the time.
* we need to make sure we only get our own stuff always.
* bleah!
*/
if (!(ifp->if_flags & IFF_PROMISC)
&& (eh->ether_dhost[0] & 1) == 0 /* !mcast and !bcast */
&& bcmp(eh->ether_dhost, IF_LLADDR(sc->vx_ifp),
ETHER_ADDR_LEN) != 0) {
m_freem(m);
return;
}
VX_UNLOCK(sc);
(*ifp->if_input)(ifp, m);
VX_LOCK(sc);
/*
* In periods of high traffic we can actually receive enough
* packets so that the fifo overrun bit will be set at this point,
* even though we just read a packet. In this case we
* are not going to receive any more interrupts. We check for
* this condition and read again until the fifo is not full.
* We could simplify this test by not using vx_status(), but
* rechecking the RX_STATUS register directly. This test could
* result in unnecessary looping in cases where there is a new
* packet but the fifo is not full, but it will not fix the
* stuck behavior.
*
* Even with this improvement, we still get packet overrun errors
* which are hurting performance. Maybe when I get some more time
* I'll modify vx_read() so that it can handle RX_EARLY interrupts.
*/
if (vx_status(sc)) {
len = CSR_READ_2(sc, VX_W1_RX_STATUS);
/* Check if we are stuck and reset [see XXX comment] */
if (len & ERR_INCOMPLETE) {
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "adapter reset\n");
vx_reset(sc);
return;
}
goto again;
}
return;
abort:
CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK);
}
static struct mbuf *
vx_get(struct vx_softc *sc, u_int totlen)
{
struct ifnet *ifp = sc->vx_ifp;
struct mbuf *top, **mp, *m;
int len;
VX_LOCK_ASSERT(sc);
m = sc->vx_mb[sc->vx_next_mb];
sc->vx_mb[sc->vx_next_mb] = NULL;
if (m == NULL) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL)
return NULL;
} else {
/* If the queue is no longer full, refill. */
if (sc->vx_last_mb == sc->vx_next_mb &&
sc->vx_buffill_pending == 0) {
callout_reset(&sc->vx_callout, hz / 100, vx_mbuf_fill,
sc);
sc->vx_buffill_pending = 1;
}
/* Convert one of our saved mbuf's. */
sc->vx_next_mb = (sc->vx_next_mb + 1) % MAX_MBS;
m->m_data = m->m_pktdat;
m->m_flags = M_PKTHDR;
bzero(&m->m_pkthdr, sizeof(m->m_pkthdr));
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = totlen;
len = MHLEN;
top = NULL;
mp = ⊤
/*
* We read the packet at splhigh() so that an interrupt from another
* device doesn't cause the card's buffer to overflow while we're
* reading it. We may still lose packets at other times.
*
* XXX: Can't enforce this anymore.
*/
/*
* Since we don't set allowLargePackets bit in MacControl register,
* we can assume that totlen <= 1500bytes.
* The while loop will be performed iff we have a packet with
* MLEN < m_len < MINCLSIZE.
*/
while (totlen > 0) {
if (top) {
m = sc->vx_mb[sc->vx_next_mb];
sc->vx_mb[sc->vx_next_mb] = NULL;
if (m == NULL) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
m_freem(top);
return NULL;
}
} else {
sc->vx_next_mb = (sc->vx_next_mb + 1) % MAX_MBS;
}
len = MLEN;
}
if (totlen >= MINCLSIZE) {
MCLGET(m, M_DONTWAIT);
if (m->m_flags & M_EXT)
len = MCLBYTES;
}
len = min(totlen, len);
if (len > 3)
bus_space_read_multi_4(sc->vx_bst, sc->vx_bsh,
VX_W1_RX_PIO_RD_1, mtod(m, u_int32_t *), len / 4);
if (len & 3) {
bus_space_read_multi_1(sc->vx_bst, sc->vx_bsh,
VX_W1_RX_PIO_RD_1, mtod(m, u_int8_t *) + (len & ~3),
len & 3);
}
m->m_len = len;
totlen -= len;
*mp = m;
mp = &m->m_next;
}
CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK);
return top;
}
static int
vx_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct vx_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
int error = 0;
switch (cmd) {
case SIOCSIFFLAGS:
VX_LOCK(sc);
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
vx_stop(sc);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
vx_init_locked(sc);
} else {
/*
* deal with flags changes:
* IFF_MULTICAST, IFF_PROMISC,
* IFF_LINK0, IFF_LINK1,
*/
vx_setfilter(sc);
vx_setlink(sc);
}
VX_UNLOCK(sc);
break;
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
VX_LOCK(sc);
if (ifr->ifr_mtu > ETHERMTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
VX_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
VX_LOCK(sc);
vx_reset(sc);
VX_UNLOCK(sc);
error = 0;
break;
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
return (error);
}
static void
vx_reset(struct vx_softc *sc)
{
VX_LOCK_ASSERT(sc);
vx_stop(sc);
vx_init_locked(sc);
}
static void
vx_watchdog(void *arg)
{
struct vx_softc *sc;
struct ifnet *ifp;
sc = arg;
VX_LOCK_ASSERT(sc);
callout_reset(&sc->vx_watchdog, hz, vx_watchdog, sc);
if (sc->vx_timer == 0 || --sc->vx_timer > 0)
return;
ifp = sc->vx_ifp;
if (ifp->if_flags & IFF_DEBUG)
if_printf(ifp, "device timeout\n");
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
vx_start_locked(ifp);
vx_intr(sc);
}
void
vx_stop(struct vx_softc *sc)
{
VX_LOCK_ASSERT(sc);
sc->vx_timer = 0;
callout_stop(&sc->vx_watchdog);
CSR_WRITE_2(sc, VX_COMMAND, RX_DISABLE);
CSR_WRITE_2(sc, VX_COMMAND, RX_DISCARD_TOP_PACK);
VX_BUSY_WAIT;
CSR_WRITE_2(sc, VX_COMMAND, TX_DISABLE);
CSR_WRITE_2(sc, VX_COMMAND, STOP_TRANSCEIVER);
DELAY(800);
CSR_WRITE_2(sc, VX_COMMAND, RX_RESET);
VX_BUSY_WAIT;
CSR_WRITE_2(sc, VX_COMMAND, TX_RESET);
VX_BUSY_WAIT;
CSR_WRITE_2(sc, VX_COMMAND, C_INTR_LATCH);
CSR_WRITE_2(sc, VX_COMMAND, SET_RD_0_MASK);
CSR_WRITE_2(sc, VX_COMMAND, SET_INTR_MASK);
CSR_WRITE_2(sc, VX_COMMAND, SET_RX_FILTER);
vx_mbuf_empty(sc);
}
int
vx_busy_eeprom(struct vx_softc *sc)
{
int j, i = 100;
while (i--) {
j = CSR_READ_2(sc, VX_W0_EEPROM_COMMAND);
if (j & EEPROM_BUSY)
DELAY(100);
else
break;
}
if (!i) {
if_printf(sc->vx_ifp, "eeprom failed to come ready\n");
return (1);
}
return (0);
}
static void
vx_mbuf_fill(void *sp)
{
struct vx_softc *sc = (struct vx_softc *)sp;
int i;
VX_LOCK_ASSERT(sc);
i = sc->vx_last_mb;
do {
if (sc->vx_mb[i] == NULL)
MGET(sc->vx_mb[i], M_DONTWAIT, MT_DATA);
if (sc->vx_mb[i] == NULL)
break;
i = (i + 1) % MAX_MBS;
} while (i != sc->vx_next_mb);
sc->vx_last_mb = i;
/* If the queue was not filled, try again. */
if (sc->vx_last_mb != sc->vx_next_mb) {
callout_reset(&sc->vx_callout, hz / 100, vx_mbuf_fill, sc);
sc->vx_buffill_pending = 1;
} else {
sc->vx_buffill_pending = 0;
}
}
static void
vx_mbuf_empty(struct vx_softc *sc)
{
int i;
VX_LOCK_ASSERT(sc);
for (i = 0; i < MAX_MBS; i++) {
if (sc->vx_mb[i]) {
m_freem(sc->vx_mb[i]);
sc->vx_mb[i] = NULL;
}
}
sc->vx_last_mb = sc->vx_next_mb = 0;
if (sc->vx_buffill_pending != 0)
callout_stop(&sc->vx_callout);
}