| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/vxge/include/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ata/atapci/chipsets/atacyrix/@/dev/vxge/include/vxge-defs.h |
/*-
* Copyright(c) 2002-2011 Exar Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification are permitted provided the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Exar Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD: release/9.1.0/sys/dev/vxge/include/vxge-defs.h 221167 2011-04-28 14:33:15Z gnn $*/
#ifndef VXGE_DEFS_H
#define VXGE_DEFS_H
#define VXGE_PCI_VENDOR_ID 0x17D5
#define VXGE_PCI_DEVICE_ID_TITAN_1 0x5833
#define VXGE_PCI_REVISION_TITAN_1 1
#define VXGE_PCI_DEVICE_ID_TITAN_1A 0x5833
#define VXGE_PCI_REVISION_TITAN_1A 2
#define VXGE_PCI_DEVICE_ID_TITAN_2 0x5834
#define VXGE_PCI_REVISION_TITAN_2 1
#define VXGE_MIN_FW_MAJOR_VERSION 1
#define VXGE_MIN_FW_MINOR_VERSION 8
#define VXGE_MIN_FW_BUILD_NUMBER 1
#define VXGE_DRIVER_VENDOR "Exar Corp."
#define VXGE_CHIP_FAMILY "X3100"
#define VXGE_SUPPORTED_MEDIA_0 "Fiber"
#define VXGE_DRIVER_NAME \
"Neterion X3100 10GbE PCIe Server Adapter Driver"
/*
* mBIT(loc) - set bit at offset
*/
#define mBIT(loc) (0x8000000000000000ULL >> (loc))
/*
* vBIT(val, loc, sz) - set bits at offset
*/
#define vBIT(val, loc, sz) (((u64)(val)) << (64-(loc)-(sz)))
#define vBIT32(val, loc, sz) (((u32)(val)) << (32-(loc)-(sz)))
/*
* bVALx(bits, loc) - Get the value of x bits at location
*/
#define bVAL1(bits, loc) ((((u64)bits) >> (64-(loc+1))) & 0x1)
#define bVAL2(bits, loc) ((((u64)bits) >> (64-(loc+2))) & 0x3)
#define bVAL3(bits, loc) ((((u64)bits) >> (64-(loc+3))) & 0x7)
#define bVAL4(bits, loc) ((((u64)bits) >> (64-(loc+4))) & 0xF)
#define bVAL5(bits, loc) ((((u64)bits) >> (64-(loc+5))) & 0x1F)
#define bVAL6(bits, loc) ((((u64)bits) >> (64-(loc+6))) & 0x3F)
#define bVAL7(bits, loc) ((((u64)bits) >> (64-(loc+7))) & 0x7F)
#define bVAL8(bits, loc) ((((u64)bits) >> (64-(loc+8))) & 0xFF)
#define bVAL9(bits, loc) ((((u64)bits) >> (64-(loc+9))) & 0x1FF)
#define bVAL11(bits, loc) ((((u64)bits) >> (64-(loc+11))) & 0x7FF)
#define bVAL12(bits, loc) ((((u64)bits) >> (64-(loc+12))) & 0xFFF)
#define bVAL14(bits, loc) ((((u64)bits) >> (64-(loc+14))) & 0x3FFF)
#define bVAL15(bits, loc) ((((u64)bits) >> (64-(loc+15))) & 0x7FFF)
#define bVAL16(bits, loc) ((((u64)bits) >> (64-(loc+16))) & 0xFFFF)
#define bVAL17(bits, loc) ((((u64)bits) >> (64-(loc+17))) & 0x1FFFF)
#define bVAL18(bits, loc) ((((u64)bits) >> (64-(loc+18))) & 0x3FFFF)
#define bVAL20(bits, loc) ((((u64)bits) >> (64-(loc+20))) & 0xFFFFF)
#define bVAL22(bits, loc) ((((u64)bits) >> (64-(loc+22))) & 0x3FFFFF)
#define bVAL24(bits, loc) ((((u64)bits) >> (64-(loc+24))) & 0xFFFFFF)
#define bVAL28(bits, loc) ((((u64)bits) >> (64-(loc+28))) & 0xFFFFFFF)
#define bVAL32(bits, loc) ((((u64)bits) >> (64-(loc+32))) & 0xFFFFFFFF)
#define bVAL36(bits, loc) ((((u64)bits) >> (64-(loc+36))) & 0xFFFFFFFFFULL)
#define bVAL40(bits, loc) ((((u64)bits) >> (64-(loc+40))) & 0xFFFFFFFFFFULL)
#define bVAL44(bits, loc) ((((u64)bits) >> (64-(loc+44))) & 0xFFFFFFFFFFFULL)
#define bVAL48(bits, loc) ((((u64)bits) >> (64-(loc+48))) & 0xFFFFFFFFFFFFULL)
#define bVAL52(bits, loc) ((((u64)bits) >> (64-(loc+52))) & 0xFFFFFFFFFFFFFULL)
#define bVAL56(bits, loc) ((((u64)bits) >> (64-(loc+56))) & 0xFFFFFFFFFFFFFFULL)
#define bVAL60(bits, loc) \
((((u64)bits) >> (64-(loc+60))) & 0xFFFFFFFFFFFFFFFULL)
#define bVAL61(bits, loc) \
((((u64)bits) >> (64-(loc+61))) & 0x1FFFFFFFFFFFFFFFULL)
#define VXGE_HAL_VPATH_BMAP_START 47
#define VXGE_HAL_VPATH_BMAP_END 63
#define VXGE_HAL_ALL_FOXES 0xFFFFFFFFFFFFFFFFULL
#define VXGE_HAL_INTR_MASK_ALL 0xFFFFFFFFFFFFFFFFULL
#define VXGE_HAL_MAX_VIRTUAL_PATHS 17
#define VXGE_HAL_MAX_FUNCTIONS 8
#define VXGE_HAL_MAX_ITABLE_ENTRIES 256
#define VXGE_HAL_MAX_RSS_KEY_SIZE 40
#define VXGE_HAL_MAC_MAX_WIRE_PORTS 2
#define VXGE_HAL_MAC_SWITCH_PORT 2
#define VXGE_HAL_MAC_MAX_AGGR_PORTS 2
#define VXGE_HAL_MAC_MAX_PORTS 3
#define VXGE_HAL_INTR_ALARM (1<<4)
#define VXGE_HAL_INTR_TX (1<<(3-VXGE_HAL_VPATH_INTR_TX))
#define VXGE_HAL_INTR_RX (1<<(3-VXGE_HAL_VPATH_INTR_RX))
#define VXGE_HAL_INTR_EINTA (1<<(3-VXGE_HAL_VPATH_INTR_EINTA))
#define VXGE_HAL_INTR_BMAP (1<<(3-VXGE_HAL_VPATH_INTR_BMAP))
#define VXGE_HAL_PCI_CONFIG_SPACE_SIZE VXGE_OS_PCI_CONFIG_SIZE
#define VXGE_HAL_DEFAULT_32 0xffffffff
#define VXGE_HAL_DEFAULT_64 0xffffffffffffffff
#define VXGE_HAL_DUMP_BUF_SIZE 0x10000
#define VXGE_HAL_VPD_BUFFER_SIZE 128
#define VXGE_HAL_VPD_LENGTH 80
/* Check whether an address is multicast. */
#define VXGE_HAL_IS_NULL(Address) (Address == 0x0000000000000000ULL)
/* Check whether an address is multicast. */
#define VXGE_HAL_IS_MULTICAST(Address) (Address & 0x0000010000000000ULL)
/* Check whether an address is broadcast. */
#define VXGE_HAL_IS_BROADCAST(Address) \
((Address & 0x0000FFFF00000000ULL) == 0x0000FFFF00000000ULL)
#define VXGE_HAL_IS_UNICAST(Address) \
(!(VXGE_HAL_IS_NULL(Address) || \
VXGE_HAL_IS_MULTICAST(Address) || \
VXGE_HAL_IS_BROADCAST(Address)))
/* frames sizes */
#define VXGE_HAL_HEADER_ETHERNET_II_802_3_SIZE 14
#define VXGE_HAL_HEADER_802_2_SIZE 3
#define VXGE_HAL_HEADER_SNAP_SIZE 5
#define VXGE_HAL_HEADER_VLAN_SIZE 4
#define VXGE_HAL_MAC_HEADER_MAX_SIZE \
(VXGE_HAL_HEADER_ETHERNET_II_802_3_SIZE + \
VXGE_HAL_HEADER_802_2_SIZE + \
VXGE_HAL_HEADER_SNAP_SIZE)
#define VXGE_HAL_TCPIP_HEADER_MAX_SIZE (64 + 64)
/* 32bit alignments */
/* A receive data corruption can occur resulting in either a single-bit or
double-bit ECC error being flagged in the ASIC if starting offset of a
buffer in single buffer mode is 0x2 to 0xa. Single bit ECC error will not
lock up the card but can hide the data corruption while the double-bit ECC
error will lock up the card. Limiting the starting offset of the buffers to
0x0, 0x1 or to a value greater than 0xF will workaround this issue.
VXGE_HAL_HEADER_ETHERNET_II_802_3_ALIGN of 2 causes the starting offset of
buffer to be 0x2, 0x12 and so on, to have the start of the ip header dword
aligned. The start of buffer of 0x2 will cause this problem to occur.
To avoid this problem in all cases, add 0x10 to 0x2, to ensure that the start
of buffer is outside of the problem causing offsets.
*/
#define VXGE_HAL_HEADER_ETHERNET_II_802_3_ALIGN 0x12
#define VXGE_HAL_HEADER_802_2_SNAP_ALIGN 2
#define VXGE_HAL_HEADER_802_2_ALIGN 3
#define VXGE_HAL_HEADER_SNAP_ALIGN 1
#define VXGE_HAL_MIN_MTU 46
#define VXGE_HAL_MAX_MTU 9600
#define VXGE_HAL_DEFAULT_MTU 1500
#define VXGE_HAL_SEGEMENT_OFFLOAD_MAX_SIZE 81920
#if defined(__EXTERN_BEGIN_DECLS)
#undef __EXTERN_BEGIN_DECLS
#endif
#if defined(__EXTERN_END_DECLS)
#undef __EXTERN_END_DECLS
#endif
#if defined(__cplusplus)
#define __EXTERN_BEGIN_DECLS extern "C" {
#define __EXTERN_END_DECLS }
#else
#define __EXTERN_BEGIN_DECLS
#define __EXTERN_END_DECLS
#endif
__EXTERN_BEGIN_DECLS
/* --------------------------- common stuffs ------------------------------ */
/*
* VXGE_OS_DMA_REQUIRES_SYNC - should be defined or
* NOT defined in the Makefile
*/
#define VXGE_OS_DMA_CACHELINE_ALIGNED 0x1
/*
* Either STREAMING or CONSISTENT should be used.
* The combination of both or none is invalid
*/
#define VXGE_OS_DMA_STREAMING 0x2
#define VXGE_OS_DMA_CONSISTENT 0x4
#define VXGE_OS_SPRINTF_STRLEN 64
/* --------------------------- common stuffs ------------------------------ */
#ifndef VXGE_OS_LLXFMT
#define VXGE_OS_LLXFMT "%llx"
#endif
#ifndef VXGE_OS_LLDFMT
#define VXGE_OS_LLDFMT "%lld"
#endif
#ifndef VXGE_OS_STXFMT
#define VXGE_OS_STXFMT "%zx"
#endif
#ifndef VXGE_OS_STDFMT
#define VXGE_OS_STDFMT "%zd"
#endif
__EXTERN_END_DECLS
#endif /* VXGE_DEFS_H */