| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/cardbus/@/dev/bktr/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/cardbus/@/dev/bktr/ioctl_bt848.h |
/*
* extensions to ioctl_meteor.h for the bt848 cards
*
* $FreeBSD: release/9.1.0/sys/dev/bktr/ioctl_bt848.h 205781 2010-03-28 00:10:09Z gibbs $
*/
#ifndef _DEV_BKTR_IOCTL_BT848_H_
#define _DEV_BKTR_IOCTL_BT848_H_
/*
* frequency sets
*/
#define CHNLSET_NABCST 1
#define CHNLSET_CABLEIRC 2
#define CHNLSET_CABLEHRC 3
#define CHNLSET_WEUROPE 4
#define CHNLSET_JPNBCST 5
#define CHNLSET_JPNCABLE 6
#define CHNLSET_XUSSR 7
#define CHNLSET_AUSTRALIA 8
#define CHNLSET_FRANCE 9
#define CHNLSET_MIN CHNLSET_NABCST
#define CHNLSET_MAX CHNLSET_FRANCE
/*
* constants for various tuner registers
*/
#define BT848_HUEMIN (-90)
#define BT848_HUEMAX 90
#define BT848_HUECENTER 0
#define BT848_HUERANGE 179.3
#define BT848_HUEREGMIN (-128)
#define BT848_HUEREGMAX 127
#define BT848_HUESTEPS 256
#define BT848_BRIGHTMIN (-50)
#define BT848_BRIGHTMAX 50
#define BT848_BRIGHTCENTER 0
#define BT848_BRIGHTRANGE 99.6
#define BT848_BRIGHTREGMIN (-128)
#define BT848_BRIGHTREGMAX 127
#define BT848_BRIGHTSTEPS 256
#define BT848_CONTRASTMIN 0
#define BT848_CONTRASTMAX 237
#define BT848_CONTRASTCENTER 100
#define BT848_CONTRASTRANGE 236.57
#define BT848_CONTRASTREGMIN 0
#define BT848_CONTRASTREGMAX 511
#define BT848_CONTRASTSTEPS 512
#define BT848_CHROMAMIN 0
#define BT848_CHROMAMAX 284
#define BT848_CHROMACENTER 100
#define BT848_CHROMARANGE 283.89
#define BT848_CHROMAREGMIN 0
#define BT848_CHROMAREGMAX 511
#define BT848_CHROMASTEPS 512
#define BT848_SATUMIN 0
#define BT848_SATUMAX 202
#define BT848_SATUCENTER 100
#define BT848_SATURANGE 201.18
#define BT848_SATUREGMIN 0
#define BT848_SATUREGMAX 511
#define BT848_SATUSTEPS 512
#define BT848_SATVMIN 0
#define BT848_SATVMAX 284
#define BT848_SATVCENTER 100
#define BT848_SATVRANGE 283.89
#define BT848_SATVREGMIN 0
#define BT848_SATVREGMAX 511
#define BT848_SATVSTEPS 512
/*
* audio stuff
*/
#define AUDIO_TUNER 0x00 /* command for the audio routine */
#define AUDIO_EXTERN 0x01 /* don't confuse them with bit */
#define AUDIO_INTERN 0x02 /* settings */
#define AUDIO_MUTE 0x80
#define AUDIO_UNMUTE 0x81
/*
* EEProm stuff
*/
struct eeProm {
short offset;
short count;
unsigned char bytes[ 256 ];
};
/*
* XXX: this is a hack, should be in ioctl_meteor.h
* here to avoid touching that file for now...
*/
#define TVTUNER_SETCHNL _IOW('x', 32, unsigned int) /* set channel */
#define TVTUNER_GETCHNL _IOR('x', 32, unsigned int) /* get channel */
#define TVTUNER_SETTYPE _IOW('x', 33, unsigned int) /* set tuner type */
#define TVTUNER_GETTYPE _IOR('x', 33, unsigned int) /* get tuner type */
#define TVTUNER_GETSTATUS _IOR('x', 34, unsigned int) /* get tuner status */
#define TVTUNER_SETFREQ _IOW('x', 35, unsigned int) /* set frequency */
#define TVTUNER_GETFREQ _IOR('x', 36, unsigned int) /* get frequency */
#define BT848_SHUE _IOW('x', 37, int) /* set hue */
#define BT848_GHUE _IOR('x', 37, int) /* get hue */
#define BT848_SBRIG _IOW('x', 38, int) /* set brightness */
#define BT848_GBRIG _IOR('x', 38, int) /* get brightness */
#define BT848_SCSAT _IOW('x', 39, int) /* set chroma sat */
#define BT848_GCSAT _IOR('x', 39, int) /* get UV saturation */
#define BT848_SCONT _IOW('x', 40, int) /* set contrast */
#define BT848_GCONT _IOR('x', 40, int) /* get contrast */
#define BT848_SVSAT _IOW('x', 41, int) /* set chroma V sat */
#define BT848_GVSAT _IOR('x', 41, int) /* get V saturation */
#define BT848_SUSAT _IOW('x', 42, int) /* set chroma U sat */
#define BT848_GUSAT _IOR('x', 42, int) /* get U saturation */
#define BT848_SCBARS _IOR('x', 43, int) /* set colorbar */
#define BT848_CCBARS _IOR('x', 44, int) /* clear colorbar */
#define BT848_SAUDIO _IOW('x', 46, int) /* set audio channel */
#define BT848_GAUDIO _IOR('x', 47, int) /* get audio channel */
#define BT848_SBTSC _IOW('x', 48, int) /* set audio channel */
#define BT848_GSTATUS _IOR('x', 49, unsigned int) /* reap status */
#define BT848_WEEPROM _IOWR('x', 50, struct eeProm) /* write to EEProm */
#define BT848_REEPROM _IOWR('x', 51, struct eeProm) /* read from EEProm */
#define BT848_SIGNATURE _IOWR('x', 52, struct eeProm) /* read card sig */
#define TVTUNER_SETAFC _IOW('x', 53, int) /* turn AFC on/off */
#define TVTUNER_GETAFC _IOR('x', 54, int) /* query AFC on/off */
#define BT848_SLNOTCH _IOW('x', 55, int) /* set luma notch */
#define BT848_GLNOTCH _IOR('x', 56, int) /* get luma notch */
/* Read/Write the BT848's I2C bus directly
* b7-b0: data (read/write)
* b15-b8: internal peripheral register (write)
* b23-b16: i2c addr (write)
* b31-b24: 1 = write, 0 = read
*/
#define BT848_I2CWR _IOWR('x', 57, unsigned long) /* i2c read-write */
struct bktr_msp_control {
unsigned char function;
unsigned int address;
unsigned int data;
};
#define BT848_MSP_RESET _IO('x', 76) /* MSP chip reset */
#define BT848_MSP_READ _IOWR('x', 77, struct bktr_msp_control) /* MSP chip read */
#define BT848_MSP_WRITE _IOWR('x', 78, struct bktr_msp_control) /* MSP chip write */
/* Support for radio tuner */
#define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */
#define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */
#define RADIO_AFC 0x01 /* These modes will probably not */
#define RADIO_MONO 0x02 /* work on the FRxxxx. It does */
#define RADIO_MUTE 0x08 /* work on the FMxxxx. */
#define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */
#define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */
/* Argument is frequency*100MHz */
/*
* XXX: more bad magic,
* we need to fix the METEORGINPUT to return something public
* duplicate them here for now...
*/
#define METEOR_DEV0 0x00001000
#define METEOR_DEV1 0x00002000
#define METEOR_DEV2 0x00004000
#define METEOR_DEV3 0x00008000
#define METEOR_DEV_SVIDEO 0x00006000
/*
* right now I don't know were to put these, but as they are suppose to be
* a part of a common video capture interface, these should be relocated to
* another place. Probably most of the METEOR_xxx defines need to be
* renamed and moved to a common header
*/
typedef enum { METEOR_PIXTYPE_RGB, METEOR_PIXTYPE_YUV,
METEOR_PIXTYPE_YUV_PACKED,
METEOR_PIXTYPE_YUV_12 } METEOR_PIXTYPE;
struct meteor_pixfmt {
unsigned int index; /* Index in supported pixfmt list */
METEOR_PIXTYPE type; /* What's the board gonna feed us */
unsigned int Bpp; /* Bytes per pixel */
unsigned long masks[3]; /* R,G,B or Y,U,V masks, respectively */
unsigned swap_bytes :1; /* Bytes swapped within shorts */
unsigned swap_shorts:1; /* Shorts swapped within longs */
};
struct bktr_clip {
int x_min;
int x_max;
int y_min;
int y_max;
};
#define BT848_MAX_CLIP_NODE 100
struct _bktr_clip {
struct bktr_clip x[BT848_MAX_CLIP_NODE];
};
/*
* I'm using METEOR_xxx just because that will be common to other interface
* and less of a surprise
*/
#define METEORSACTPIXFMT _IOW('x', 64, int )
#define METEORGACTPIXFMT _IOR('x', 64, int )
#define METEORGSUPPIXFMT _IOWR('x', 65, struct meteor_pixfmt)
/* set clip list */
#define BT848SCLIP _IOW('x', 66, struct _bktr_clip )
#define BT848GCLIP _IOR('x', 66, struct _bktr_clip )
/* set input format */
#define BT848SFMT _IOW('x', 67, unsigned long )
#define BT848GFMT _IOR('x', 67, unsigned long )
/* set clear-buffer-on-start */
#define BT848SCBUF _IOW('x', 68, int)
#define BT848GCBUF _IOR('x', 68, int)
/* set capture area */
/* The capture area is the area of the video image which is grabbed */
/* Usually the capture area is 640x480 (768x576 PAL) pixels */
/* This area is then scaled to the dimensions the user requires */
/* using the METEORGEO ioctl */
/* However, the capture area could be 400x300 pixels from the top right */
/* corner of the video image */
struct bktr_capture_area {
int x_offset;
int y_offset;
int x_size;
int y_size;
};
#define BT848_SCAPAREA _IOW('x', 69, struct bktr_capture_area)
#define BT848_GCAPAREA _IOR('x', 69, struct bktr_capture_area)
/* Get channel Set */
#define BT848_MAX_CHNLSET_NAME_LEN 16
struct bktr_chnlset {
short index;
short max_channel;
char name[BT848_MAX_CHNLSET_NAME_LEN];
};
#define TVTUNER_GETCHNLSET _IOWR('x', 70, struct bktr_chnlset)
/* Infra Red Remote Control */
struct bktr_remote {
unsigned char data[3];
};
#define REMOTE_GETKEY _IOR('x', 71, struct bktr_remote)/*read the remote */
/*control receiver*/
/*returns raw data*/
/*
* Direct access to GPIO pins. You must add BKTR_GPIO_ACCESS to your kernel
* configuration file to use these
*/
#define BT848_GPIO_SET_EN _IOW('x', 72, int) /* set gpio_out_en */
#define BT848_GPIO_GET_EN _IOR('x', 73, int) /* get gpio_out_en */
#define BT848_GPIO_SET_DATA _IOW('x', 74, int) /* set gpio_data */
#define BT848_GPIO_GET_DATA _IOR('x', 75, int) /* get gpio_data */
/* XXX - Copied from /sys/pci/brktree_reg.h */
#define BT848_IFORM_FORMAT (0x7<<0)
# define BT848_IFORM_F_RSVD (0x7)
# define BT848_IFORM_F_SECAM (0x6)
# define BT848_IFORM_F_PALN (0x5)
# define BT848_IFORM_F_PALM (0x4)
# define BT848_IFORM_F_PALBDGHI (0x3)
# define BT848_IFORM_F_NTSCJ (0x2)
# define BT848_IFORM_F_NTSCM (0x1)
# define BT848_IFORM_F_AUTO (0x0)
#endif /* _DEV_BKTR_IOCTL_BT848_H_ */