Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/cas/@/dev/advansys/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/cas/@/dev/advansys/adwlib.h |
/*- * Definitions for low level routines and data structures * for the Advanced Systems Inc. SCSI controllers chips. * * Copyright (c) 1998, 1999, 2000 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/dev/advansys/adwlib.h 141854 2005-02-14 01:10:50Z obrien $ */ /*- * Ported from: * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters * * Copyright (c) 1995-1998 Advanced System Products, Inc. * All Rights Reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that redistributions of source * code retain the above copyright notice and this comment without * modification. */ #ifndef _ADWLIB_H_ #define _ADWLIB_H_ #include "opt_adw.h" #include <dev/advansys/adwmcode.h> #define ADW_DEF_MAX_HOST_QNG 253 #define ADW_DEF_MIN_HOST_QNG 16 #define ADW_DEF_MAX_DVC_QNG 63 #define ADW_DEF_MIN_DVC_QNG 4 #define ADW_MAX_TID 15 #define ADW_MAX_LUN 7 #define ADW_ALL_TARGETS 0xFFFF #define ADW_TARGET_GROUP(tid) ((tid) & ~0x3) #define ADW_TARGET_GROUP_SHIFT(tid) (((tid) & 0x3) * 4) #define ADW_TARGET_GROUP_MASK(tid) (0xF << ADW_TARGET_GROUP_SHIFT(tid)) /* * Board Register offsets. */ #define ADW_INTR_STATUS_REG 0x0000 #define ADW_INTR_STATUS_INTRA 0x01 #define ADW_INTR_STATUS_INTRB 0x02 #define ADW_INTR_STATUS_INTRC 0x04 #define ADW_INTR_STATUS_INTRALL 0x07 #define ADW_SIGNATURE_WORD 0x0000 #define ADW_CHIP_ID_WORD 0x04C1 #define ADW_SIGNATURE_BYTE 0x0001 #define ADW_CHIP_ID_BYTE 0x25 #define ADW_INTR_ENABLES 0x0002 /*8 bit */ #define ADW_INTR_ENABLE_HOST_INTR 0x01 #define ADW_INTR_ENABLE_SEL_INTR 0x02 #define ADW_INTR_ENABLE_DPR_INTR 0x04 #define ADW_INTR_ENABLE_RTA_INTR 0x08 #define ADW_INTR_ENABLE_RMA_INTR 0x10 #define ADW_INTR_ENABLE_RST_INTR 0x20 #define ADW_INTR_ENABLE_DPE_INTR 0x40 #define ADW_INTR_ENABLE_GLOBAL_INTR 0x80 #define ADW_CTRL_REG 0x0002 /*16 bit*/ #define ADW_CTRL_REG_HOST_INTR 0x0100 #define ADW_CTRL_REG_SEL_INTR 0x0200 #define ADW_CTRL_REG_DPR_INTR 0x0400 #define ADW_CTRL_REG_RTA_INTR 0x0800 #define ADW_CTRL_REG_RMA_INTR 0x1000 #define ADW_CTRL_REG_RES_BIT14 0x2000 #define ADW_CTRL_REG_DPE_INTR 0x4000 #define ADW_CTRL_REG_POWER_DONE 0x8000 #define ADW_CTRL_REG_ANY_INTR 0xFF00 #define ADW_CTRL_REG_CMD_RESET 0x00C6 #define ADW_CTRL_REG_CMD_WR_IO_REG 0x00C5 #define ADW_CTRL_REG_CMD_RD_IO_REG 0x00C4 #define ADW_CTRL_REG_CMD_WR_PCI_CFG 0x00C3 #define ADW_CTRL_REG_CMD_RD_PCI_CFG 0x00C2 #define ADW_RAM_ADDR 0x0004 #define ADW_RAM_DATA 0x0006 #define ADW_RISC_CSR 0x000A #define ADW_RISC_CSR_STOP 0x0000 #define ADW_RISC_TEST_COND 0x2000 #define ADW_RISC_CSR_RUN 0x4000 #define ADW_RISC_CSR_SINGLE_STEP 0x8000 #define ADW_SCSI_CFG0 0x000C #define ADW_SCSI_CFG0_TIMER_MODEAB 0xC000 /* * Watchdog, Second, * and Selto timer CFG */ #define ADW_SCSI_CFG0_PARITY_EN 0x2000 #define ADW_SCSI_CFG0_EVEN_PARITY 0x1000 #define ADW_SCSI_CFG0_WD_LONG 0x0800 /* * Watchdog Interval, * 1: 57 min, 0: 13 sec */ #define ADW_SCSI_CFG0_QUEUE_128 0x0400 /* * Queue Size, * 1: 128 byte, * 0: 64 byte */ #define ADW_SCSI_CFG0_PRIM_MODE 0x0100 #define ADW_SCSI_CFG0_SCAM_EN 0x0080 #define ADW_SCSI_CFG0_SEL_TMO_LONG 0x0040 /* * Sel/Resel Timeout, * 1: 400 ms, * 0: 1.6 ms */ #define ADW_SCSI_CFG0_CFRM_ID 0x0020 /* SCAM id sel. */ #define ADW_SCSI_CFG0_OUR_ID_EN 0x0010 #define ADW_SCSI_CFG0_OUR_ID 0x000F #define ADW_SCSI_CFG1 0x000E #define ADW_SCSI_CFG1_BIG_ENDIAN 0x8000 #define ADW_SCSI_CFG1_TERM_POL 0x2000 #define ADW_SCSI_CFG1_SLEW_RATE 0x1000 #define ADW_SCSI_CFG1_FILTER_MASK 0x0C00 #define ADW_SCSI_CFG1_FLTR_DISABLE 0x0000 #define ADW_SCSI_CFG1_FLTR_11_TO_20NS 0x0800 #define ADW_SCSI_CFG1_FLTR_21_TO_39NS 0x0C00 #define ADW_SCSI_CFG1_DIS_ACTIVE_NEG 0x0200 #define ADW_SCSI_CFG1_DIFF_MODE 0x0100 #define ADW_SCSI_CFG1_DIFF_SENSE 0x0080 #define ADW_SCSI_CFG1_TERM_CTL_MANUAL 0x0040 /* Global Term Switch */ #define ADW_SCSI_CFG1_TERM_CTL_MASK 0x0030 #define ADW_SCSI_CFG1_TERM_CTL_H 0x0020 /* Enable SCSI-H */ #define ADW_SCSI_CFG1_TERM_CTL_L 0x0010 /* Enable SCSI-L */ #define ADW_SCSI_CFG1_CABLE_DETECT 0x000F #define ADW_SCSI_CFG1_EXT16_MASK 0x0008 /* Ext16 cable pres */ #define ADW_SCSI_CFG1_EXT8_MASK 0x0004 /* Ext8 cable pres */ #define ADW_SCSI_CFG1_INT8_MASK 0x0002 /* Int8 cable pres */ #define ADW_SCSI_CFG1_INT16_MASK 0x0001 /* Int16 cable pres */ #define ADW_SCSI_CFG1_ILLEGAL_CABLE_CONF_A_MASK \ (ADW_SCSI_CFG1_EXT16_MASK|ADW_SCSI_CFG1_INT8_MASK|ADW_SCSI_CFG1_INT16_MASK) #define ADW_SCSI_CFG1_ILLEGAL_CABLE_CONF_B_MASK \ (ADW_SCSI_CFG1_EXT8_MASK|ADW_SCSI_CFG1_INT8_MASK|ADW_SCSI_CFG1_INT16_MASK) /* * Addendum for ASC-38C0800 Chip */ #define ADW2_SCSI_CFG1_DIS_TERM_DRV 0x4000 /* * The Terminators * must be disabled * in order to detect * cable presence */ #define ADW2_SCSI_CFG1_DEV_DETECT 0x1C00 #define ADW2_SCSI_CFG1_DEV_DETECT_HVD 0x1000 #define ADW2_SCSI_CFG1_DEV_DETECT_LVD 0x0800 #define ADW2_SCSI_CFG1_DEV_DETECT_SE 0x0400 #define ADW2_SCSI_CFG1_TERM_CTL_LVD 0x00C0 /* Ultra2 Only */ #define ADW2_SCSI_CFG1_TERM_LVD_HI 0x0080 #define ADW2_SCSI_CFG1_TERM_LVD_LO 0x0040 #define ADW2_SCSI_CFG1_EXTLVD_MASK 0x0008 /* ExtLVD cable pres */ #define ADW2_SCSI_CFG1_INTLVD_MASK 0x0004 /* IntLVD cable pres */ #define ADW_MEM_CFG 0x0010 #define ADW_MEM_CFG_BIOS_EN 0x40 #define ADW_MEM_CFG_FAST_EE_CLK 0x20 /* Diagnostic Bit */ #define ADW_MEM_CFG_RAM_SZ_MASK 0x1C /* RISC RAM Size */ #define ADW_MEM_CFG_RAM_SZ_2KB 0x00 #define ADW_MEM_CFG_RAM_SZ_4KB 0x04 #define ADW_MEM_CFG_RAM_SZ_8KB 0x08 #define ADW_MEM_CFG_RAM_SZ_16KB 0x0C #define ADW_MEM_CFG_RAM_SZ_32KB 0x10 #define ADW_MEM_CFG_RAM_SZ_64KB 0x14 #define ADW_GPIO_CNTL 0x0011 #define ADW_GPIO_DATA 0x0012 #define ADW_COMMA 0x0014 #define ADW_COMMB 0x0018 #define ADW_EEP_CMD 0x001A #define ADW_EEP_CMD_READ 0x0080 /* or in address */ #define ADW_EEP_CMD_WRITE 0x0040 /* or in address */ #define ADW_EEP_CMD_WRITE_ABLE 0x0030 #define ADW_EEP_CMD_WRITE_DISABLE 0x0000 #define ADW_EEP_CMD_DONE 0x0200 #define ADW_EEP_CMD_DONE_ERR 0x0001 #define ADW_EEP_DELAY_MS 100 #define ADW_EEP_DATA 0x001C #define ADW_DMA_CFG0 0x0020 #define ADW_DMA_CFG0_BC_THRESH_ENB 0x80 #define ADW_DMA_CFG0_FIFO_THRESH 0x70 #define ADW_DMA_CFG0_FIFO_THRESH_16B 0x00 #define ADW_DMA_CFG0_FIFO_THRESH_32B 0x20 #define ADW_DMA_CFG0_FIFO_THRESH_48B 0x30 #define ADW_DMA_CFG0_FIFO_THRESH_64B 0x40 #define ADW_DMA_CFG0_FIFO_THRESH_80B 0x50 #define ADW_DMA_CFG0_FIFO_THRESH_96B 0x60 #define ADW_DMA_CFG0_FIFO_THRESH_112B 0x70 #define ADW_DMA_CFG0_START_CTL_MASK 0x0C #define ADW_DMA_CFG0_START_CTL_TH 0x00 /* Start on thresh */ #define ADW_DMA_CFG0_START_CTL_IDLE 0x04 /* Start when idle */ #define ADW_DMA_CFG0_START_CTL_TH_IDLE 0x08 /* Either */ #define ADW_DMA_CFG0_START_CTL_EM_FU 0x0C /* Start on full/empty */ #define ADW_DMA_CFG0_READ_CMD_MASK 0x03 #define ADW_DMA_CFG0_READ_CMD_MR 0x00 #define ADW_DMA_CFG0_READ_CMD_MRL 0x02 #define ADW_DMA_CFG0_READ_CMD_MRM 0x03 #define ADW_TICKLE 0x0022 #define ADW_TICKLE_NOP 0x00 #define ADW_TICKLE_A 0x01 #define ADW_TICKLE_B 0x02 #define ADW_TICKLE_C 0x03 /* Program Counter */ #define ADW_PC 0x2A #define ADW_SCSI_CTRL 0x0034 #define ADW_SCSI_CTRL_RSTOUT 0x2000 /* * ASC-38C0800 RAM BIST Register bit definitions */ #define ADW_RAM_BIST 0x0038 #define ADW_RAM_BIST_RAM_TEST_MODE 0x80 #define ADW_RAM_BIST_PRE_TEST_MODE 0x40 #define ADW_RAM_BIST_NORMAL_MODE 0x00 #define ADW_RAM_BIST_RAM_TEST_DONE 0x10 #define ADW_RAM_BIST_RAM_TEST_STATUS 0x0F #define ADW_RAM_BIST_RAM_TEST_HOST_ERR 0x08 #define ADW_RAM_BIST_RAM_TEST_RAM_ERR 0x04 #define ADW_RAM_BIST_RAM_TEST_RISC_ERR 0x02 #define ADW_RAM_BIST_RAM_TEST_SCSI_ERR 0x01 #define ADW_RAM_BIST_RAM_TEST_SUCCESS 0x00 #define ADW_RAM_BIST_PRE_TEST_VALUE 0x05 #define ADW_RAM_BIST_NORMAL_VALUE 0x00 #define ADW_PLL_TEST 0x0039 #define ADW_SCSI_RESET_HOLD_TIME_US 60 /* LRAM Constants */ #define ADW_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ #define ADW_3550_IOLEN 0x40 /* I/O Port Range in bytes */ #define ADW_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ #define ADW_38C0800_IOLEN 0x100 /* I/O Port Range in bytes */ #define ADW_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */ #define ADW_38C1600_IOLEN 0x100 /* I/O Port Range in bytes */ #define ADW_38C1600_MEMLEN 0x1000 /* Memory Range 4KB */ #define ADW_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */ #define ADW_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */ #define PCI_ID_ADVANSYS_3550 0x230010CD00000000ull #define PCI_ID_ADVANSYS_38C0800_REV1 0x250010CD00000000ull #define PCI_ID_ADVANSYS_38C1600_REV1 0x270010CD00000000ull #define PCI_ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull #define PCI_ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull /* ====================== SCSI Request Structures =========================== */ #define ADW_NO_OF_SG_PER_BLOCK 15 /* * Although the adapter can deal with S/G lists of indefinite size, * we limit the list to 30 to conserve space as the kernel can only send * us buffers of at most 64KB currently. */ #define ADW_SG_BLOCKCNT 2 #define ADW_SGSIZE (ADW_NO_OF_SG_PER_BLOCK * ADW_SG_BLOCKCNT) struct adw_sg_elm { u_int32_t sg_addr; u_int32_t sg_count; }; /* sg block structure used by the microcode */ struct adw_sg_block { u_int8_t reserved1; u_int8_t reserved2; u_int8_t reserved3; u_int8_t sg_cnt; /* Valid entries in this block */ u_int32_t sg_busaddr_next; /* link to the next sg block */ struct adw_sg_elm sg_list[ADW_NO_OF_SG_PER_BLOCK]; }; /* Structure representing a single allocation block of adw sg blocks */ struct sg_map_node { bus_dmamap_t sg_dmamap; bus_addr_t sg_physaddr; struct adw_sg_block* sg_vaddr; SLIST_ENTRY(sg_map_node) links; }; typedef enum { QHSTA_NO_ERROR = 0x00, QHSTA_M_SEL_TIMEOUT = 0x11, QHSTA_M_DATA_OVER_RUN = 0x12, QHSTA_M_UNEXPECTED_BUS_FREE = 0x13, QHSTA_M_QUEUE_ABORTED = 0x15, QHSTA_M_SXFR_SDMA_ERR = 0x16, /* SCSI DMA Error */ QHSTA_M_SXFR_SXFR_PERR = 0x17, /* SCSI Bus Parity Error */ QHSTA_M_RDMA_PERR = 0x18, /* RISC PCI DMA parity error */ QHSTA_M_SXFR_OFF_UFLW = 0x19, /* Offset Underflow */ QHSTA_M_SXFR_OFF_OFLW = 0x20, /* Offset Overflow */ QHSTA_M_SXFR_WD_TMO = 0x21, /* Watchdog Timeout */ QHSTA_M_SXFR_DESELECTED = 0x22, /* Deselected */ QHSTA_M_SXFR_XFR_PH_ERR = 0x24, /* Transfer Phase Error */ QHSTA_M_SXFR_UNKNOWN_ERROR = 0x25, /* SXFR_STATUS Unknown Error */ QHSTA_M_SCSI_BUS_RESET = 0x30, /* Request aborted from SBR */ QHSTA_M_SCSI_BUS_RESET_UNSOL= 0x31, /* Request aborted from unsol. SBR*/ QHSTA_M_BUS_DEVICE_RESET = 0x32, /* Request aborted from BDR */ QHSTA_M_DIRECTION_ERR = 0x35, /* Data Phase mismatch */ QHSTA_M_DIRECTION_ERR_HUNG = 0x36, /* Data Phase mismatch - bus hang */ QHSTA_M_WTM_TIMEOUT = 0x41, QHSTA_M_BAD_CMPL_STATUS_IN = 0x42, QHSTA_M_NO_AUTO_REQ_SENSE = 0x43, QHSTA_M_AUTO_REQ_SENSE_FAIL = 0x44, QHSTA_M_INVALID_DEVICE = 0x45, /* Bad target ID */ QHSTA_M_FROZEN_TIDQ = 0x46, /* TID Queue frozen. */ QHSTA_M_SGBACKUP_ERROR = 0x47 /* Scatter-Gather backup error */ } host_status_t; typedef enum { QD_NO_STATUS = 0x00, /* Request not completed yet. */ QD_NO_ERROR = 0x01, QD_ABORTED_BY_HOST = 0x02, QD_WITH_ERROR = 0x04 } done_status_t; /* * Microcode request structure * * All fields in this structure are used by the microcode so their * size and ordering cannot be changed. */ struct adw_scsi_req_q { u_int8_t cntl; /* Ucode flags and state. */ u_int8_t target_cmd; u_int8_t target_id; /* Device target identifier. */ u_int8_t target_lun; /* Device target logical unit number. */ u_int32_t data_addr; /* Data buffer physical address. */ u_int32_t data_cnt; /* Data count. Ucode sets to residual. */ u_int32_t sense_baddr; /* Sense buffer bus address. */ u_int32_t carrier_baddr; /* Carrier bus address. */ u_int8_t mflag; /* microcode flag field. */ u_int8_t sense_len; /* Auto-sense length. Residual on complete. */ u_int8_t cdb_len; /* SCSI CDB length. */ u_int8_t scsi_cntl; /* SCSI command control flags (tags, nego) */ #define ADW_QSC_NO_DISC 0x01 #define ADW_QSC_NO_TAGMSG 0x02 #define ADW_QSC_NO_SYNC 0x04 #define ADW_QSC_NO_WIDE 0x08 #define ADW_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR */ #define ADW_QSC_SIMPLE_Q_TAG 0x00 #define ADW_QSC_HEAD_OF_Q_TAG 0x40 #define ADW_QSC_ORDERED_Q_TAG 0x80 u_int8_t done_status; /* Completion status. */ u_int8_t scsi_status; /* SCSI status byte. */ u_int8_t host_status; /* Ucode host status. */ u_int8_t sg_wk_ix; /* Microcode working SG index. */ u_int8_t cdb[12]; /* SCSI command block. */ u_int32_t sg_real_addr; /* SG list physical address. */ u_int32_t scsi_req_baddr; /* Bus address of this structure. */ u_int32_t sg_wk_data_cnt; /* Saved data count at disconnection. */ /* * The 'tokens' placed in these two fields are * used to identify the scsi request and the next * carrier in the response queue, *not* physical * addresses. This driver uses byte offsets for * portability and speed of mapping back to either * a virtual or physical address. */ u_int32_t scsi_req_bo; /* byte offset of this structure */ u_int32_t carrier_bo; /* byte offst of our carrier. */ }; typedef enum { ACB_FREE = 0x00, ACB_ACTIVE = 0x01, ACB_RELEASE_SIMQ = 0x02, ACB_RECOVERY_ACB = 0x04 } acb_state; struct acb { struct adw_scsi_req_q queue; bus_dmamap_t dmamap; acb_state state; union ccb *ccb; struct adw_sg_block* sg_blocks; bus_addr_t sg_busaddr; struct scsi_sense_data sense_data; SLIST_ENTRY(acb) links; }; /* * EEPROM configuration format * * Field naming convention: * * *_enable indicates the field enables or disables the feature. The * value is never reset. * * *_able indicates both whether a feature should be enabled or disabled * and whether a device is capable of the feature. At initialization * this field may be set, but later if a device is found to be incapable * of the feature, the field is cleared. * * Default values are maintained in a_init.c in the structure * Default_EEPROM_Config. */ struct adw_eeprom { u_int16_t cfg_lsw; /* 00 power up initialization */ #define ADW_EEPROM_BIG_ENDIAN 0x8000 #define ADW_EEPROM_BIOS_ENABLE 0x4000 #define ADW_EEPROM_TERM_POL 0x2000 #define ADW_EEPROM_CIS_LD 0x1000 /* bit 13 set - Term Polarity Control */ /* bit 14 set - BIOS Enable */ /* bit 15 set - Big Endian Mode */ u_int16_t cfg_msw; /* unused */ u_int16_t disc_enable; u_int16_t wdtr_able; union { /* * sync enable bits for UW cards, * actual sync rate for TID 0-3 * on U2W and U160 cards. */ u_int16_t sync_enable; u_int16_t sdtr1; } sync1; u_int16_t start_motor; u_int16_t tagqng_able; u_int16_t bios_scan; u_int16_t scam_tolerant; u_int8_t adapter_scsi_id; u_int8_t bios_boot_delay; u_int8_t scsi_reset_delay; u_int8_t bios_id_lun; /* high nibble is lun */ /* low nibble is scsi id */ u_int8_t termination_se; /* 0 - automatic */ #define ADW_EEPROM_TERM_AUTO 0 #define ADW_EEPROM_TERM_OFF 1 #define ADW_EEPROM_TERM_HIGH_ON 2 #define ADW_EEPROM_TERM_BOTH_ON 3 u_int8_t termination_lvd; u_int16_t bios_ctrl; #define ADW_BIOS_INIT_DIS 0x0001 /* Don't act as initiator */ #define ADW_BIOS_EXT_TRANS 0x0002 /* > 1 GB support */ #define ADW_BIOS_MORE_2DISK 0x0004 /* > 1 GB support */ #define ADW_BIOS_NO_REMOVABLE 0x0008 /* don't support removable media */ #define ADW_BIOS_CD_BOOT 0x0010 /* support bootable CD */ #define ADW_BIOS_SCAN_EN 0x0020 /* BIOS SCAN enabled */ #define ADW_BIOS_MULTI_LUN 0x0040 /* probe luns */ #define ADW_BIOS_MESSAGE 0x0080 /* display BIOS message */ #define ADW_BIOS_RESET_BUS 0x0200 /* reset SCSI bus durint init */ #define ADW_BIOS_QUIET 0x0800 /* No verbose initialization */ #define ADW_BIOS_SCSI_PAR_EN 0x1000 /* SCSI parity enabled */ union { /* 13 * ultra enable bits for UW cards, * actual sync rate for TID 4-7 * on U2W and U160 cards. */ u_int16_t ultra_enable; u_int16_t sdtr2; } sync2; union { /* 14 * reserved for UW cards, * actual sync rate for TID 8-11 * on U2W and U160 cards. */ u_int16_t reserved; u_int16_t sdtr3; } sync3; u_int8_t max_host_qng; /* 15 maximum host queuing */ u_int8_t max_dvc_qng; /* maximum per device queuing */ u_int16_t dvc_cntl; /* 16 control bit for driver */ union { /* 17 * reserved for UW cards, * actual sync rate for TID 12-15 * on U2W and U160 cards. */ u_int16_t reserved; u_int16_t sdtr4; } sync4; u_int16_t serial_number[3]; /* 18-20 */ u_int16_t checksum; /* 21 */ u_int8_t oem_name[16]; /* 22 - 29 */ u_int16_t dvc_err_code; /* 30 */ u_int16_t adv_err_code; /* 31 */ u_int16_t adv_err_addr; /* 32 */ u_int16_t saved_dvc_err_code; /* 33 */ u_int16_t saved_adv_err_code; /* 34 */ u_int16_t saved_adv_err_addr; /* 35 */ u_int16_t reserved[20]; /* 36 - 55 */ u_int16_t cisptr_lsw; /* 56 CIS data */ u_int16_t cisptr_msw; /* 57 CIS data */ u_int32_t subid; /* 58-59 SubSystem Vendor/Dev ID */ u_int16_t reserved2[4]; }; /* EEProm Addresses */ #define ADW_EEP_DVC_CFG_BEGIN 0x00 #define ADW_EEP_DVC_CFG_END (offsetof(struct adw_eeprom, checksum)/2) #define ADW_EEP_DVC_CTL_BEGIN (offsetof(struct adw_eeprom, oem_name)/2) #define ADW_EEP_MAX_WORD_ADDR (sizeof(struct adw_eeprom)/2) #define ADW_BUS_RESET_HOLD_DELAY_US 100 typedef enum { ADW_CHIP_NONE, ADW_CHIP_ASC3550, /* Ultra-Wide IC */ ADW_CHIP_ASC38C0800, /* Ultra2-Wide/LVD IC */ ADW_CHIP_ASC38C1600 /* Ultra3-Wide/LVD2 IC */ } adw_chip; typedef enum { ADW_FENONE = 0x0000, ADW_ULTRA = 0x0001, /* Supports 20MHz Transfers */ ADW_ULTRA2 = 0x0002, /* Supports 40MHz Transfers */ ADW_DT = 0x0004, /* Supports Double Transistion REQ/ACK*/ ADW_WIDE = 0x0008, /* Wide Channel */ ADW_ASC3550_FE = ADW_ULTRA, ADW_ASC38C0800_FE = ADW_ULTRA2, ADW_ASC38C1600_FE = ADW_ULTRA2|ADW_DT } adw_feature; typedef enum { ADW_FNONE = 0x0000, ADW_EEPROM_FAILED = 0x0001 } adw_flag; typedef enum { ADW_STATE_NORMAL = 0x00, ADW_RESOURCE_SHORTAGE = 0x01 } adw_state; typedef enum { ADW_MC_SDTR_ASYNC, ADW_MC_SDTR_5, ADW_MC_SDTR_10, ADW_MC_SDTR_20, ADW_MC_SDTR_40, ADW_MC_SDTR_80 } adw_mc_sdtr; struct adw_syncrate { adw_mc_sdtr mc_sdtr; u_int8_t period; char *rate; }; /* We have an input and output queue for our carrier structures */ #define ADW_OUTPUT_QUEUE 0 /* Offset into carriers member */ #define ADW_INPUT_QUEUE 1 /* Offset into carriers member */ #define ADW_NUM_CARRIER_QUEUES 2 struct adw_softc { bus_space_tag_t tag; bus_space_handle_t bsh; adw_state state; bus_dma_tag_t buffer_dmat; struct acb *acbs; struct adw_carrier *carriers; struct adw_carrier *free_carriers; struct adw_carrier *commandq; struct adw_carrier *responseq; LIST_HEAD(, ccb_hdr) pending_ccbs; SLIST_HEAD(, acb) free_acb_list; bus_dma_tag_t parent_dmat; bus_dma_tag_t carrier_dmat; /* dmat for our acb carriers*/ bus_dmamap_t carrier_dmamap; bus_dma_tag_t acb_dmat; /* dmat for our ccb array */ bus_dmamap_t acb_dmamap; bus_dma_tag_t sg_dmat; /* dmat for our sg maps */ SLIST_HEAD(, sg_map_node) sg_maps; bus_addr_t acb_busbase; bus_addr_t carrier_busbase; adw_chip chip; adw_feature features; adw_flag flags; u_int memsize; char channel; struct cam_path *path; struct cam_sim *sim; struct resource *regs; struct resource *irq; void *ih; const struct adw_mcode *mcode_data; const struct adw_eeprom *default_eeprom; device_t device; int regs_res_type; int regs_res_id; int irq_res_type; u_int max_acbs; u_int num_acbs; u_int initiator_id; u_int init_level; u_int unit; char* name; cam_status last_reset; /* Last reset type */ u_int16_t bios_ctrl; u_int16_t user_wdtr; u_int16_t user_sdtr[4]; /* A nibble per-device */ u_int16_t user_tagenb; u_int16_t tagenb; u_int16_t user_discenb; u_int16_t serial_number[3]; }; extern const struct adw_eeprom adw_asc3550_default_eeprom; extern const struct adw_eeprom adw_asc38C0800_default_eeprom; extern const struct adw_syncrate adw_syncrates[]; extern const int adw_num_syncrates; #define adw_inb(adw, port) \ bus_space_read_1((adw)->tag, (adw)->bsh, port) #define adw_inw(adw, port) \ bus_space_read_2((adw)->tag, (adw)->bsh, port) #define adw_inl(adw, port) \ bus_space_read_4((adw)->tag, (adw)->bsh, port) #define adw_outb(adw, port, value) \ bus_space_write_1((adw)->tag, (adw)->bsh, port, value) #define adw_outw(adw, port, value) \ bus_space_write_2((adw)->tag, (adw)->bsh, port, value) #define adw_outl(adw, port, value) \ bus_space_write_4((adw)->tag, (adw)->bsh, port, value) #define adw_set_multi_2(adw, port, value, count) \ bus_space_set_multi_2((adw)->tag, (adw)->bsh, port, value, count) static __inline const char* adw_name(struct adw_softc *adw); static __inline u_int adw_lram_read_8(struct adw_softc *adw, u_int addr); static __inline u_int adw_lram_read_16(struct adw_softc *adw, u_int addr); static __inline u_int adw_lram_read_32(struct adw_softc *adw, u_int addr); static __inline void adw_lram_write_8(struct adw_softc *adw, u_int addr, u_int value); static __inline void adw_lram_write_16(struct adw_softc *adw, u_int addr, u_int value); static __inline void adw_lram_write_32(struct adw_softc *adw, u_int addr, u_int value); static __inline u_int32_t acbvtobo(struct adw_softc *adw, struct acb *acb); static __inline u_int32_t acbvtob(struct adw_softc *adw, struct acb *acb); static __inline struct acb * acbbotov(struct adw_softc *adw, u_int32_t busaddr); static __inline struct acb * acbbtov(struct adw_softc *adw, u_int32_t busaddr); static __inline u_int32_t carriervtobo(struct adw_softc *adw, struct adw_carrier *carrier); static __inline u_int32_t carriervtob(struct adw_softc *adw, struct adw_carrier *carrier); static __inline struct adw_carrier * carrierbotov(struct adw_softc *adw, u_int32_t byte_offset); static __inline struct adw_carrier * carrierbtov(struct adw_softc *adw, u_int32_t baddr); static __inline const char* adw_name(struct adw_softc *adw) { return (adw->name); } static __inline u_int adw_lram_read_8(struct adw_softc *adw, u_int addr) { adw_outw(adw, ADW_RAM_ADDR, addr); return (adw_inb(adw, ADW_RAM_DATA)); } static __inline u_int adw_lram_read_16(struct adw_softc *adw, u_int addr) { adw_outw(adw, ADW_RAM_ADDR, addr); return (adw_inw(adw, ADW_RAM_DATA)); } static __inline u_int adw_lram_read_32(struct adw_softc *adw, u_int addr) { u_int retval; adw_outw(adw, ADW_RAM_ADDR, addr); retval = adw_inw(adw, ADW_RAM_DATA); retval |= (adw_inw(adw, ADW_RAM_DATA) << 16); return (retval); } static __inline void adw_lram_write_8(struct adw_softc *adw, u_int addr, u_int value) { adw_outw(adw, ADW_RAM_ADDR, addr); adw_outb(adw, ADW_RAM_DATA, value); } static __inline void adw_lram_write_16(struct adw_softc *adw, u_int addr, u_int value) { adw_outw(adw, ADW_RAM_ADDR, addr); adw_outw(adw, ADW_RAM_DATA, value); } static __inline void adw_lram_write_32(struct adw_softc *adw, u_int addr, u_int value) { adw_outw(adw, ADW_RAM_ADDR, addr); adw_outw(adw, ADW_RAM_DATA, value); adw_outw(adw, ADW_RAM_DATA, value >> 16); } static __inline u_int32_t acbvtobo(struct adw_softc *adw, struct acb *acb) { return ((u_int32_t)((caddr_t)acb - (caddr_t)adw->acbs)); } static __inline u_int32_t acbvtob(struct adw_softc *adw, struct acb *acb) { return (adw->acb_busbase + acbvtobo(adw, acb)); } static __inline struct acb * acbbotov(struct adw_softc *adw, u_int32_t byteoffset) { return ((struct acb *)((caddr_t)adw->acbs + byteoffset)); } static __inline struct acb * acbbtov(struct adw_softc *adw, u_int32_t busaddr) { return (acbbotov(adw, busaddr - adw->acb_busbase)); } /* * Return the byte offset for a carrier relative to our array of carriers. */ static __inline u_int32_t carriervtobo(struct adw_softc *adw, struct adw_carrier *carrier) { return ((u_int32_t)((caddr_t)carrier - (caddr_t)adw->carriers)); } static __inline u_int32_t carriervtob(struct adw_softc *adw, struct adw_carrier *carrier) { return (adw->carrier_busbase + carriervtobo(adw, carrier)); } static __inline struct adw_carrier * carrierbotov(struct adw_softc *adw, u_int32_t byte_offset) { return ((struct adw_carrier *)((caddr_t)adw->carriers + byte_offset)); } static __inline struct adw_carrier * carrierbtov(struct adw_softc *adw, u_int32_t baddr) { return (carrierbotov(adw, baddr - adw->carrier_busbase)); } /* Intialization */ int adw_find_signature(struct adw_softc *adw); void adw_reset_chip(struct adw_softc *adw); int adw_reset_bus(struct adw_softc *adw); u_int16_t adw_eeprom_read(struct adw_softc *adw, struct adw_eeprom *buf); void adw_eeprom_write(struct adw_softc *adw, struct adw_eeprom *buf); int adw_init_chip(struct adw_softc *adw, u_int term_scsicfg1); void adw_set_user_sdtr(struct adw_softc *adw, u_int tid, u_int mc_sdtr); u_int adw_get_user_sdtr(struct adw_softc *adw, u_int tid); void adw_set_chip_sdtr(struct adw_softc *adw, u_int tid, u_int sdtr); u_int adw_get_chip_sdtr(struct adw_softc *adw, u_int tid); u_int adw_find_sdtr(struct adw_softc *adw, u_int period); u_int adw_find_period(struct adw_softc *adw, u_int mc_sdtr); u_int adw_hshk_cfg_period_factor(u_int tinfo); /* Idle Commands */ adw_idle_cmd_status_t adw_idle_cmd_send(struct adw_softc *adw, u_int cmd, u_int parameter); /* SCSI Transaction Processing */ static __inline void adw_send_acb(struct adw_softc *adw, struct acb *acb, u_int32_t acb_baddr); static __inline void adw_tickle_risc(struct adw_softc *adw, u_int value) { /* * Tickle the RISC to tell it to read its Command Queue Head pointer. */ adw_outb(adw, ADW_TICKLE, value); if (adw->chip == ADW_CHIP_ASC3550) { /* * Clear the tickle value. In the ASC-3550 the RISC flag * command 'clr_tickle_a' does not work unless the host * value is cleared. */ adw_outb(adw, ADW_TICKLE, ADW_TICKLE_NOP); } } static __inline void adw_send_acb(struct adw_softc *adw, struct acb *acb, u_int32_t acb_baddr) { struct adw_carrier *new_cq; new_cq = adw->free_carriers; adw->free_carriers = carrierbotov(adw, new_cq->next_ba); new_cq->next_ba = ADW_CQ_STOPPER; acb->queue.carrier_baddr = adw->commandq->carr_ba; acb->queue.carrier_bo = adw->commandq->carr_offset; adw->commandq->areq_ba = acbvtob(adw, acb); adw->commandq->next_ba = new_cq->carr_ba; #if 0 printf("EnQ 0x%x 0x%x 0x%x 0x%x\n", adw->commandq->carr_offset, adw->commandq->carr_ba, adw->commandq->areq_ba, adw->commandq->next_ba); #endif adw->commandq = new_cq; adw_tickle_risc(adw, ADW_TICKLE_A); } #endif /* _ADWLIB_H_ */