Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/drm/radeon/@/dev/trm/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/drm/radeon/@/dev/trm/trm.c |
/* * O.S : FreeBSD CAM * FILE NAME : trm.c * BY : C.L. Huang (ching@tekram.com.tw) * Erich Chen (erich@tekram.com.tw) * Description: Device Driver for Tekram SCSI adapters * DC395U/UW/F ,DC315/U(TRM-S1040) * DC395U2D/U2W(TRM-S2080) * PCI SCSI Bus Master Host Adapter * (SCSI chip set used Tekram ASIC TRM-S1040,TRM-S2080) */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/dev/trm/trm.c 233024 2012-03-16 08:46:58Z scottl $"); /* * HISTORY: * * REV# DATE NAME DESCRIPTION * 1.05 05/01/1999 ERICH CHEN First released for 3.x.x (CAM) * 1.06 07/29/1999 ERICH CHEN Modify for NEW PCI * 1.07 12/12/1999 ERICH CHEN Modify for 3.3.x ,DCB no free * 1.08 06/12/2000 ERICH CHEN Modify for 4.x.x * 1.09 11/03/2000 ERICH CHEN Modify for 4.1.R ,new sim * 1.10 10/10/2001 Oscar Feng Fixed CAM rescan hang up bug. * 1.11 10/13/2001 Oscar Feng Fixed wrong Async speed display bug. */ /*- * (C)Copyright 1995-2001 Tekram Technology Co.,Ltd. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /* * Imported into FreeBSD source repository, and updated to compile under * FreeBSD-3.0-DEVELOPMENT, by Stefan Esser <se@FreeBSD.Org>, 1996-12-17 */ /* * Updated to compile under FreeBSD 5.0-CURRENT by Olivier Houchard * <doginou@ci0.org>, 2002-03-04 */ #include <sys/param.h> #include <sys/systm.h> #include <sys/malloc.h> #include <sys/queue.h> #if __FreeBSD_version >= 500000 #include <sys/bio.h> #endif #include <sys/buf.h> #include <sys/bus.h> #include <sys/kernel.h> #include <sys/module.h> #include <vm/vm.h> #include <vm/pmap.h> #include <dev/pci/pcivar.h> #include <dev/pci/pcireg.h> #include <machine/resource.h> #include <machine/bus.h> #include <sys/rman.h> #include <cam/cam.h> #include <cam/cam_ccb.h> #include <cam/cam_sim.h> #include <cam/cam_xpt_sim.h> #include <cam/cam_debug.h> #include <cam/scsi/scsi_all.h> #include <cam/scsi/scsi_message.h> #include <dev/trm/trm.h> #define trm_reg_read8(reg) bus_space_read_1(pACB->tag, pACB->bsh, reg) #define trm_reg_read16(reg) bus_space_read_2(pACB->tag, pACB->bsh, reg) #define trm_reg_read32(reg) bus_space_read_4(pACB->tag, pACB->bsh, reg) #define trm_reg_write8(value,reg) bus_space_write_1(pACB->tag, pACB->bsh,\ reg, value) #define trm_reg_write16(value,reg) bus_space_write_2(pACB->tag, pACB->bsh,\ reg, value) #define trm_reg_write32(value,reg) bus_space_write_4(pACB->tag, pACB->bsh,\ reg, value) #define PCI_Vendor_ID_TEKRAM 0x1DE1 #define PCI_Device_ID_TRM_S1040 0x0391 #define PCI_DEVICEID_TRMS1040 0x03911DE1 #define PCI_DEVICEID_TRMS2080 0x03921DE1 #ifdef trm_DEBUG1 #define TRM_DPRINTF(fmt, arg...) printf("trm: " fmt, ##arg) #else #define TRM_DPRINTF(fmt, arg...) {} #endif /* TRM_DEBUG */ static void trm_check_eeprom(PNVRAMTYPE pEEpromBuf,PACB pACB); static void NVRAM_trm_read_all(PNVRAMTYPE pEEpromBuf,PACB pACB); static u_int8_t NVRAM_trm_get_data(PACB pACB, u_int8_t bAddr); static void NVRAM_trm_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB); static void NVRAM_trm_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData); static void NVRAM_trm_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr); static void NVRAM_trm_wait_30us(PACB pACB); static void trm_Interrupt(void *vpACB); static void trm_DataOutPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_DataInPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_CommandPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_StatusPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_MsgOutPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_MsgInPhase0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_DataOutPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_DataInPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_CommandPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_StatusPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_MsgOutPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_MsgInPhase1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_Nop0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_Nop1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status); static void trm_SetXferRate(PACB pACB, PSRB pSRB,PDCB pDCB); static void trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir); static void trm_Disconnect(PACB pACB); static void trm_Reselect(PACB pACB); static void trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB); static void trm_DoingSRB_Done(PACB pACB); static void trm_ScsiRstDetect(PACB pACB); static void trm_ResetSCSIBus(PACB pACB); static void trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB); static void trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB); static void trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB); static void trm_SendSRB(PACB pACB, PSRB pSRB); static int trm_probe(device_t tag); static int trm_attach(device_t tag); static void trm_reset(PACB pACB); static u_int16_t trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB); static int trm_initAdapter(PACB pACB, u_int16_t unit); static void trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit, u_int32_t i, u_int32_t j); static int trm_initSRB(PACB pACB); static void trm_initACB(PACB pACB, u_int8_t adaptType, u_int16_t unit); /* CAM SIM entry points */ #define ccb_trmsrb_ptr spriv_ptr0 #define ccb_trmacb_ptr spriv_ptr1 static void trm_action(struct cam_sim *psim, union ccb *pccb); static void trm_poll(struct cam_sim *psim); static void * trm_SCSI_phase0[] = { trm_DataOutPhase0, /* phase:0 */ trm_DataInPhase0, /* phase:1 */ trm_CommandPhase0, /* phase:2 */ trm_StatusPhase0, /* phase:3 */ trm_Nop0, /* phase:4 */ trm_Nop1, /* phase:5 */ trm_MsgOutPhase0, /* phase:6 */ trm_MsgInPhase0, /* phase:7 */ }; /* * * stateV = (void *) trm_SCSI_phase1[phase] * */ static void * trm_SCSI_phase1[] = { trm_DataOutPhase1, /* phase:0 */ trm_DataInPhase1, /* phase:1 */ trm_CommandPhase1, /* phase:2 */ trm_StatusPhase1, /* phase:3 */ trm_Nop0, /* phase:4 */ trm_Nop1, /* phase:5 */ trm_MsgOutPhase1, /* phase:6 */ trm_MsgInPhase1, /* phase:7 */ }; NVRAMTYPE trm_eepromBuf[TRM_MAX_ADAPTER_NUM]; /* *Fast20: 000 50ns, 20.0 Mbytes/s * 001 75ns, 13.3 Mbytes/s * 010 100ns, 10.0 Mbytes/s * 011 125ns, 8.0 Mbytes/s * 100 150ns, 6.6 Mbytes/s * 101 175ns, 5.7 Mbytes/s * 110 200ns, 5.0 Mbytes/s * 111 250ns, 4.0 Mbytes/s * *Fast40: 000 25ns, 40.0 Mbytes/s * 001 50ns, 20.0 Mbytes/s * 010 75ns, 13.3 Mbytes/s * 011 100ns, 10.0 Mbytes/s * 100 125ns, 8.0 Mbytes/s * 101 150ns, 6.6 Mbytes/s * 110 175ns, 5.7 Mbytes/s * 111 200ns, 5.0 Mbytes/s */ /* real period: */ u_int8_t dc395x_clock_period[] = { 12,/* 48 ns 20 MB/sec */ 18,/* 72 ns 13.3 MB/sec */ 25,/* 100 ns 10.0 MB/sec */ 31,/* 124 ns 8.0 MB/sec */ 37,/* 148 ns 6.6 MB/sec */ 43,/* 172 ns 5.7 MB/sec */ 50,/* 200 ns 5.0 MB/sec */ 62 /* 248 ns 4.0 MB/sec */ }; u_int8_t dc395u2x_clock_period[]={ 10,/* 25 ns 40.0 MB/sec */ 12,/* 48 ns 20.0 MB/sec */ 18,/* 72 ns 13.3 MB/sec */ 25,/* 100 ns 10.0 MB/sec */ 31,/* 124 ns 8.0 MB/sec */ 37,/* 148 ns 6.6 MB/sec */ 43,/* 172 ns 5.7 MB/sec */ 50,/* 200 ns 5.0 MB/sec */ }; #define dc395x_tinfo_period dc395x_clock_period #define dc395u2x_tinfo_period dc395u2x_clock_period static PSRB trm_GetSRB(PACB pACB) { int intflag; PSRB pSRB; intflag = splcam(); pSRB = pACB->pFreeSRB; if (pSRB) { pACB->pFreeSRB = pSRB->pNextSRB; pSRB->pNextSRB = NULL; } splx(intflag); return (pSRB); } static void trm_RewaitSRB0(PDCB pDCB, PSRB pSRB) { PSRB psrb1; int intflag; intflag = splcam(); if ((psrb1 = pDCB->pWaitingSRB)) { pSRB->pNextSRB = psrb1; pDCB->pWaitingSRB = pSRB; } else { pSRB->pNextSRB = NULL; pDCB->pWaitingSRB = pSRB; pDCB->pWaitingLastSRB = pSRB; } splx(intflag); } static void trm_RewaitSRB(PDCB pDCB, PSRB pSRB) { PSRB psrb1; int intflag; intflag = splcam(); pDCB->GoingSRBCnt--; psrb1 = pDCB->pGoingSRB; if (pSRB == psrb1) /* * if this SRB is GoingSRB * remove this SRB from GoingSRB Q */ pDCB->pGoingSRB = psrb1->pNextSRB; else { /* * if this SRB is not current GoingSRB * remove this SRB from GoingSRB Q */ while (pSRB != psrb1->pNextSRB) psrb1 = psrb1->pNextSRB; psrb1->pNextSRB = pSRB->pNextSRB; if (pSRB == pDCB->pGoingLastSRB) pDCB->pGoingLastSRB = psrb1; } if ((psrb1 = pDCB->pWaitingSRB)) { /* * if WaitingSRB Q is not NULL * Q back this SRB into WaitingSRB */ pSRB->pNextSRB = psrb1; pDCB->pWaitingSRB = pSRB; } else { pSRB->pNextSRB = NULL; pDCB->pWaitingSRB = pSRB; pDCB->pWaitingLastSRB = pSRB; } splx(intflag); } static void trm_DoWaitingSRB(PACB pACB) { int intflag; PDCB ptr, ptr1; PSRB pSRB; intflag = splcam(); if (!(pACB->pActiveDCB) && !(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) { ptr = pACB->pDCBRunRobin; if (!ptr) { ptr = pACB->pLinkDCB; pACB->pDCBRunRobin = ptr; } ptr1 = ptr; for (;ptr1 ;) { pACB->pDCBRunRobin = ptr1->pNextDCB; if (!(ptr1->MaxActiveCommandCnt > ptr1->GoingSRBCnt) || !(pSRB = ptr1->pWaitingSRB)) { if (pACB->pDCBRunRobin == ptr) break; ptr1 = ptr1->pNextDCB; } else { if (!trm_StartSCSI(pACB, ptr1, pSRB)) { /* * If trm_StartSCSI return 0 : * current interrupt status is interrupt enable * It's said that SCSI processor is unoccupied */ ptr1->GoingSRBCnt++; if (ptr1->pWaitingLastSRB == pSRB) { ptr1->pWaitingSRB = NULL; ptr1->pWaitingLastSRB = NULL; } else ptr1->pWaitingSRB = pSRB->pNextSRB; pSRB->pNextSRB = NULL; if (ptr1->pGoingSRB) ptr1->pGoingLastSRB->pNextSRB = pSRB; else ptr1->pGoingSRB = pSRB; ptr1->pGoingLastSRB = pSRB; } break; } } } splx(intflag); return; } static void trm_SRBwaiting(PDCB pDCB, PSRB pSRB) { if (pDCB->pWaitingSRB) { pDCB->pWaitingLastSRB->pNextSRB = pSRB; pDCB->pWaitingLastSRB = pSRB; pSRB->pNextSRB = NULL; } else { pDCB->pWaitingSRB = pSRB; pDCB->pWaitingLastSRB = pSRB; } } static u_int32_t trm_get_sense_bufaddr(PACB pACB, PSRB pSRB) { int offset; offset = pSRB->TagNumber; return (pACB->sense_busaddr + (offset * sizeof(struct scsi_sense_data))); } static struct scsi_sense_data * trm_get_sense_buf(PACB pACB, PSRB pSRB) { int offset; offset = pSRB->TagNumber; return (&pACB->sense_buffers[offset]); } static void trm_ExecuteSRB(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error) { int flags; PACB pACB; PSRB pSRB; union ccb *ccb; u_long totalxferlen=0; flags = splcam(); pSRB = (PSRB)arg; ccb = pSRB->pccb; pACB = (PACB)ccb->ccb_h.ccb_trmacb_ptr; TRM_DPRINTF("trm_ExecuteSRB..........\n"); if (nseg != 0) { PSEG psg; bus_dma_segment_t *end_seg; int op; /* Copy the segments into our SG list */ end_seg = dm_segs + nseg; psg = pSRB->pSRBSGL; while (dm_segs < end_seg) { psg->address = dm_segs->ds_addr; psg->length = (u_long)dm_segs->ds_len; totalxferlen += dm_segs->ds_len; psg++; dm_segs++; } if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) { op = BUS_DMASYNC_PREREAD; } else { op = BUS_DMASYNC_PREWRITE; } bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op); } pSRB->RetryCnt = 0; pSRB->SRBTotalXferLength = totalxferlen; pSRB->SRBSGCount = nseg; pSRB->SRBSGIndex = 0; pSRB->AdaptStatus = 0; pSRB->TargetStatus = 0; pSRB->MsgCnt = 0; pSRB->SRBStatus = 0; pSRB->SRBFlag = 0; pSRB->SRBState = 0; pSRB->ScsiPhase = PH_BUS_FREE; /* SCSI bus free Phase */ if (ccb->ccb_h.status != CAM_REQ_INPROG) { if (nseg != 0) bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap); pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; xpt_done(ccb); splx(flags); return; } ccb->ccb_h.status |= CAM_SIM_QUEUED; #if 0 /* XXX Need a timeout handler */ ccb->ccb_h.timeout_ch = timeout(trmtimeout, (caddr_t)srb, (ccb->ccb_h.timeout * hz) / 1000); #endif trm_SendSRB(pACB, pSRB); splx(flags); return; } static void trm_SendSRB(PACB pACB, PSRB pSRB) { PDCB pDCB; pDCB = pSRB->pSRBDCB; if (!(pDCB->MaxActiveCommandCnt > pDCB->GoingSRBCnt) || (pACB->pActiveDCB) || (pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) { TRM_DPRINTF("pDCB->MaxCommand=%d \n",pDCB->MaxActiveCommandCnt); TRM_DPRINTF("pDCB->GoingSRBCnt=%d \n",pDCB->GoingSRBCnt); TRM_DPRINTF("pACB->pActiveDCB=%8x \n",(u_int)pACB->pActiveDCB); TRM_DPRINTF("pACB->ACBFlag=%x \n",pACB->ACBFlag); trm_SRBwaiting(pDCB, pSRB); goto SND_EXIT; } if (pDCB->pWaitingSRB) { trm_SRBwaiting(pDCB, pSRB); pSRB = pDCB->pWaitingSRB; pDCB->pWaitingSRB = pSRB->pNextSRB; pSRB->pNextSRB = NULL; } if (!trm_StartSCSI(pACB, pDCB, pSRB)) { /* * If trm_StartSCSI return 0 : * current interrupt status is interrupt enable * It's said that SCSI processor is unoccupied */ pDCB->GoingSRBCnt++; /* stack waiting SRB*/ if (pDCB->pGoingSRB) { pDCB->pGoingLastSRB->pNextSRB = pSRB; pDCB->pGoingLastSRB = pSRB; } else { pDCB->pGoingSRB = pSRB; pDCB->pGoingLastSRB = pSRB; } } else { /* * If trm_StartSCSI return 1 : * current interrupt status is interrupt disreenable * It's said that SCSI processor has more one SRB need to do */ trm_RewaitSRB0(pDCB, pSRB); } SND_EXIT: return; } static void trm_action(struct cam_sim *psim, union ccb *pccb) { PACB pACB; int actionflags; u_int target_id,target_lun; CAM_DEBUG(pccb->ccb_h.path, CAM_DEBUG_TRACE, ("trm_action\n")); actionflags = splcam(); pACB = (PACB) cam_sim_softc(psim); target_id = pccb->ccb_h.target_id; target_lun = pccb->ccb_h.target_lun; switch (pccb->ccb_h.func_code) { case XPT_NOOP: TRM_DPRINTF(" XPT_NOOP \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Execute the requested I/O operation */ case XPT_SCSI_IO: { PDCB pDCB = NULL; PSRB pSRB; struct ccb_scsiio *pcsio; pcsio = &pccb->csio; TRM_DPRINTF(" XPT_SCSI_IO \n"); TRM_DPRINTF("trm: target_id= %d target_lun= %d \n" ,target_id, target_lun); TRM_DPRINTF( "pACB->scan_devices[target_id][target_lun]= %d \n" ,pACB->scan_devices[target_id][target_lun]); if ((pccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) { xpt_done(pccb); splx(actionflags); return; } pDCB = &pACB->DCBarray[target_id][target_lun]; if (!(pDCB->DCBstatus & DS_IN_QUEUE)) { pACB->scan_devices[target_id][target_lun] = 1; trm_initDCB(pACB, pDCB, pACB->AdapterUnit, target_id, target_lun); } /* * Assign an SRB and connect it with this ccb. */ pSRB = trm_GetSRB(pACB); if (!pSRB) { /* Freeze SIMQ */ pccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(pccb); splx(actionflags); return; } pSRB->pSRBDCB = pDCB; pccb->ccb_h.ccb_trmsrb_ptr = pSRB; pccb->ccb_h.ccb_trmacb_ptr = pACB; pSRB->pccb = pccb; pSRB->ScsiCmdLen = pcsio->cdb_len; /* * move layer of CAM command block to layer of SCSI * Request Block for SCSI processor command doing */ if ((pccb->ccb_h.flags & CAM_CDB_POINTER) != 0) { if ((pccb->ccb_h.flags & CAM_CDB_PHYS) == 0) { bcopy(pcsio->cdb_io.cdb_ptr,pSRB->CmdBlock ,pcsio->cdb_len); } else { pccb->ccb_h.status = CAM_REQ_INVALID; pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB= pSRB; xpt_done(pccb); splx(actionflags); return; } } else bcopy(pcsio->cdb_io.cdb_bytes, pSRB->CmdBlock, pcsio->cdb_len); if ((pccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { if ((pccb->ccb_h.flags & CAM_SCATTER_VALID) == 0) { if ((pccb->ccb_h.flags & CAM_DATA_PHYS) == 0) { int vmflags; int error; vmflags = splsoftvm(); error = bus_dmamap_load( pACB->buffer_dmat, pSRB->dmamap, pcsio->data_ptr, pcsio->dxfer_len, trm_ExecuteSRB, pSRB, 0); if (error == EINPROGRESS) { xpt_freeze_simq( pACB->psim, 1); pccb->ccb_h.status |= CAM_RELEASE_SIMQ; } splx(vmflags); } else { struct bus_dma_segment seg; /* Pointer to physical buffer */ seg.ds_addr = (bus_addr_t)pcsio->data_ptr; seg.ds_len = pcsio->dxfer_len; trm_ExecuteSRB(pSRB, &seg, 1, 0); } } else { /* CAM_SCATTER_VALID */ struct bus_dma_segment *segs; if ((pccb->ccb_h.flags & CAM_SG_LIST_PHYS) == 0 || (pccb->ccb_h.flags & CAM_DATA_PHYS) != 0) { pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; pccb->ccb_h.status = CAM_PROVIDE_FAIL; xpt_done(pccb); splx(actionflags); return; } /* cam SG list is physical, * cam data is virtual */ segs = (struct bus_dma_segment *) pcsio->data_ptr; trm_ExecuteSRB(pSRB, segs, pcsio->sglist_cnt, 1); } /* CAM_SCATTER_VALID */ } else trm_ExecuteSRB(pSRB, NULL, 0, 0); } break; case XPT_GDEV_TYPE: TRM_DPRINTF(" XPT_GDEV_TYPE \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; case XPT_GDEVLIST: TRM_DPRINTF(" XPT_GDEVLIST \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Path routing inquiry * Path Inquiry CCB */ case XPT_PATH_INQ: { struct ccb_pathinq *cpi = &pccb->cpi; TRM_DPRINTF(" XPT_PATH_INQ \n"); cpi->version_num = 1; cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16; cpi->target_sprt = 0; cpi->hba_misc = 0; cpi->hba_eng_cnt = 0; cpi->max_target = 15 ; cpi->max_lun = pACB->max_lun; /* 7 or 0 */ cpi->initiator_id = pACB->AdaptSCSIID; cpi->bus_id = cam_sim_bus(psim); cpi->base_transfer_speed = 3300; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, "Tekram_TRM", HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(psim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(psim); cpi->transport = XPORT_SPI; cpi->transport_version = 2; cpi->protocol = PROTO_SCSI; cpi->protocol_version = SCSI_REV_2; cpi->ccb_h.status = CAM_REQ_CMP; xpt_done(pccb); } break; /* * Release a frozen SIM queue * Release SIM Queue */ case XPT_REL_SIMQ: TRM_DPRINTF(" XPT_REL_SIMQ \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Set Asynchronous Callback Parameters * Set Asynchronous Callback CCB */ case XPT_SASYNC_CB: TRM_DPRINTF(" XPT_SASYNC_CB \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Set device type information * Set Device Type CCB */ case XPT_SDEV_TYPE: TRM_DPRINTF(" XPT_SDEV_TYPE \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Get EDT entries matching the given pattern */ case XPT_DEV_MATCH: TRM_DPRINTF(" XPT_DEV_MATCH \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Turn on debugging for a bus, target or lun */ case XPT_DEBUG: TRM_DPRINTF(" XPT_DEBUG \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * XPT_ABORT = 0x10, Abort the specified CCB * Abort XPT request CCB */ case XPT_ABORT: TRM_DPRINTF(" XPT_ABORT \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Reset the specified SCSI bus * Reset SCSI Bus CCB */ case XPT_RESET_BUS: { int i; TRM_DPRINTF(" XPT_RESET_BUS \n"); trm_reset(pACB); pACB->ACBFlag=0; for (i=0; i<500; i++) DELAY(1000); pccb->ccb_h.status = CAM_REQ_CMP; xpt_done(pccb); } break; /* * Bus Device Reset the specified SCSI device * Reset SCSI Device CCB */ case XPT_RESET_DEV: /* * Don't (yet?) support vendor * specific commands. */ TRM_DPRINTF(" XPT_RESET_DEV \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Terminate the I/O process * Terminate I/O Process Request CCB */ case XPT_TERM_IO: TRM_DPRINTF(" XPT_TERM_IO \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Get/Set transfer rate/width/disconnection/tag queueing * settings * (GET) default/user transfer settings for the target */ case XPT_GET_TRAN_SETTINGS: { struct ccb_trans_settings *cts = &pccb->cts; int intflag; struct trm_transinfo *tinfo; PDCB pDCB; struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; cts->protocol = PROTO_SCSI; cts->protocol_version = SCSI_REV_2; cts->transport = XPORT_SPI; cts->transport_version = 2; TRM_DPRINTF(" XPT_GET_TRAN_SETTINGS \n"); pDCB = &pACB->DCBarray[target_id][target_lun]; intflag = splcam(); /* * disable interrupt */ if (cts->type == CTS_TYPE_CURRENT_SETTINGS) { /* current transfer settings */ if (pDCB->tinfo.disc_tag & TRM_CUR_DISCENB) spi->flags = CTS_SPI_FLAGS_DISC_ENB; else spi->flags = 0;/* no tag & disconnect */ if (pDCB->tinfo.disc_tag & TRM_CUR_TAGENB) scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; tinfo = &pDCB->tinfo.current; TRM_DPRINTF("CURRENT: cts->flags= %2x \n", cts->flags); } else { /* default(user) transfer settings */ if (pDCB->tinfo.disc_tag & TRM_USR_DISCENB) spi->flags = CTS_SPI_FLAGS_DISC_ENB; else spi->flags = 0; if (pDCB->tinfo.disc_tag & TRM_USR_TAGENB) scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; tinfo = &pDCB->tinfo.user; TRM_DPRINTF("USER: cts->flags= %2x \n", cts->flags); } spi->sync_period = tinfo->period; spi->sync_offset = tinfo->offset; spi->bus_width = tinfo->width; TRM_DPRINTF("pDCB->SyncPeriod: %d \n", pDCB->SyncPeriod); TRM_DPRINTF("period: %d \n", tinfo->period); TRM_DPRINTF("offset: %d \n", tinfo->offset); TRM_DPRINTF("width: %d \n", tinfo->width); splx(intflag); spi->valid = CTS_SPI_VALID_SYNC_RATE | CTS_SPI_VALID_SYNC_OFFSET | CTS_SPI_VALID_BUS_WIDTH | CTS_SPI_VALID_DISC; scsi->valid = CTS_SCSI_VALID_TQ; pccb->ccb_h.status = CAM_REQ_CMP; xpt_done(pccb); } break; /* * Get/Set transfer rate/width/disconnection/tag queueing * settings * (Set) transfer rate/width negotiation settings */ case XPT_SET_TRAN_SETTINGS: { struct ccb_trans_settings *cts = &pccb->cts; u_int update_type; int intflag; PDCB pDCB; struct ccb_trans_settings_scsi *scsi = &cts->proto_specific.scsi; struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; TRM_DPRINTF(" XPT_SET_TRAN_SETTINGS \n"); update_type = 0; if (cts->type == CTS_TYPE_CURRENT_SETTINGS) update_type |= TRM_TRANS_GOAL; if (cts->type == CTS_TYPE_USER_SETTINGS) update_type |= TRM_TRANS_USER; intflag = splcam(); pDCB = &pACB->DCBarray[target_id][target_lun]; if ((spi->valid & CTS_SPI_VALID_DISC) != 0) { /*ccb disc enables */ if (update_type & TRM_TRANS_GOAL) { if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) pDCB->tinfo.disc_tag |= TRM_CUR_DISCENB; else pDCB->tinfo.disc_tag &= ~TRM_CUR_DISCENB; } if (update_type & TRM_TRANS_USER) { if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0) pDCB->tinfo.disc_tag |= TRM_USR_DISCENB; else pDCB->tinfo.disc_tag &= ~TRM_USR_DISCENB; } } if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) { /* if ccb tag q active */ if (update_type & TRM_TRANS_GOAL) { if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) pDCB->tinfo.disc_tag |= TRM_CUR_TAGENB; else pDCB->tinfo.disc_tag &= ~TRM_CUR_TAGENB; } if (update_type & TRM_TRANS_USER) { if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) pDCB->tinfo.disc_tag |= TRM_USR_TAGENB; else pDCB->tinfo.disc_tag &= ~TRM_USR_TAGENB; } } /* Minimum sync period factor */ if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) { /* if ccb sync active */ /* TRM-S1040 MinSyncPeriod = 4 clocks/byte */ if ((spi->sync_period != 0) && (spi->sync_period < 125)) spi->sync_period = 125; /* 1/(125*4) minsync 2 MByte/sec */ if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) { if (spi->sync_offset == 0) spi->sync_period = 0; /* TRM-S1040 MaxSyncOffset = 15 bytes*/ if (spi->sync_offset > 15) spi->sync_offset = 15; } } if ((update_type & TRM_TRANS_USER) != 0) { pDCB->tinfo.user.period = spi->sync_period; pDCB->tinfo.user.offset = spi->sync_offset; pDCB->tinfo.user.width = spi->bus_width; } if ((update_type & TRM_TRANS_GOAL) != 0) { pDCB->tinfo.goal.period = spi->sync_period; pDCB->tinfo.goal.offset = spi->sync_offset; pDCB->tinfo.goal.width = spi->bus_width; } splx(intflag); pccb->ccb_h.status = CAM_REQ_CMP; xpt_done(pccb); break; } /* * Calculate the geometry parameters for a device give * the sector size and volume size. */ case XPT_CALC_GEOMETRY: TRM_DPRINTF(" XPT_CALC_GEOMETRY \n"); cam_calc_geometry(&pccb->ccg, /*extended*/1); xpt_done(pccb); break; case XPT_ENG_INQ: TRM_DPRINTF(" XPT_ENG_INQ \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * HBA execute engine request * This structure must match SCSIIO size */ case XPT_ENG_EXEC: TRM_DPRINTF(" XPT_ENG_EXEC \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * XPT_EN_LUN = 0x30, Enable LUN as a target * Target mode structures. */ case XPT_EN_LUN: /* * Don't (yet?) support vendor * specific commands. */ TRM_DPRINTF(" XPT_EN_LUN \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Execute target I/O request */ case XPT_TARGET_IO: /* * Don't (yet?) support vendor * specific commands. */ TRM_DPRINTF(" XPT_TARGET_IO \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Accept Host Target Mode CDB */ case XPT_ACCEPT_TARGET_IO: /* * Don't (yet?) support vendor * specific commands. */ TRM_DPRINTF(" XPT_ACCEPT_TARGET_IO \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Continue Host Target I/O Connection */ case XPT_CONT_TARGET_IO: /* * Don't (yet?) support vendor * specific commands. */ TRM_DPRINTF(" XPT_CONT_TARGET_IO \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Notify Host Target driver of event */ case XPT_IMMED_NOTIFY: TRM_DPRINTF(" XPT_IMMED_NOTIFY \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * Acknowledgement of event */ case XPT_NOTIFY_ACK: TRM_DPRINTF(" XPT_NOTIFY_ACK \n"); pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; /* * XPT_VUNIQUE = 0x80 */ case XPT_VUNIQUE: pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; default: pccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(pccb); break; } splx(actionflags); } static void trm_poll(struct cam_sim *psim) { trm_Interrupt(cam_sim_softc(psim)); } static void trm_ResetDevParam(PACB pACB) { PDCB pDCB, pdcb; PNVRAMTYPE pEEpromBuf; u_int8_t PeriodIndex; pDCB = pACB->pLinkDCB; if (pDCB == NULL) return; pdcb = pDCB; do { pDCB->SyncMode &= ~(SYNC_NEGO_DONE+ WIDE_NEGO_DONE); pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; pEEpromBuf = &trm_eepromBuf[pACB->AdapterUnit]; pDCB->DevMode = pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarCfg0; pDCB->AdpMode = pEEpromBuf->NvramChannelCfg; PeriodIndex = pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarPeriod & 0x07; if (pACB->AdaptType == 1) /* is U2? */ pDCB->MaxNegoPeriod = dc395u2x_clock_period[PeriodIndex]; else pDCB->MaxNegoPeriod = dc395x_clock_period[PeriodIndex]; if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) && (pACB->Config & HCC_WIDE_CARD)) pDCB->SyncMode |= WIDE_NEGO_ENABLE; pDCB = pDCB->pNextDCB; } while (pdcb != pDCB); } static void trm_RecoverSRB(PACB pACB) { PDCB pDCB, pdcb; PSRB psrb, psrb2; u_int16_t cnt, i; pDCB = pACB->pLinkDCB; if (pDCB == NULL) return; pdcb = pDCB; do { cnt = pdcb->GoingSRBCnt; psrb = pdcb->pGoingSRB; for (i = 0; i < cnt; i++) { psrb2 = psrb; psrb = psrb->pNextSRB; if (pdcb->pWaitingSRB) { psrb2->pNextSRB = pdcb->pWaitingSRB; pdcb->pWaitingSRB = psrb2; } else { pdcb->pWaitingSRB = psrb2; pdcb->pWaitingLastSRB = psrb2; psrb2->pNextSRB = NULL; } } pdcb->GoingSRBCnt = 0; pdcb->pGoingSRB = NULL; pdcb = pdcb->pNextDCB; } while (pdcb != pDCB); } static void trm_reset(PACB pACB) { int intflag; u_int16_t i; TRM_DPRINTF("trm: RESET"); intflag = splcam(); trm_reg_write8(0x00, TRMREG_DMA_INTEN); trm_reg_write8(0x00, TRMREG_SCSI_INTEN); trm_ResetSCSIBus(pACB); for (i = 0; i < 500; i++) DELAY(1000); trm_reg_write8(0x7F, TRMREG_SCSI_INTEN); /* Enable DMA interrupt */ trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN); /* Clear DMA FIFO */ trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL); /* Clear SCSI FIFO */ trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL); trm_ResetDevParam(pACB); trm_DoingSRB_Done(pACB); pACB->pActiveDCB = NULL; pACB->ACBFlag = 0;/* RESET_DETECT, RESET_DONE ,RESET_DEV */ trm_DoWaitingSRB(pACB); /* Tell the XPT layer that a bus reset occured */ if (pACB->ppath != NULL) xpt_async(AC_BUS_RESET, pACB->ppath, NULL); splx(intflag); return; } static u_int16_t trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB) { u_int16_t return_code; u_int8_t scsicommand, i,command,identify_message; u_int8_t * ptr; union ccb *pccb; struct ccb_scsiio *pcsio; pccb = pSRB->pccb; pcsio = &pccb->csio; trm_reg_write8(pACB->AdaptSCSIID, TRMREG_SCSI_HOSTID); trm_reg_write8(pDCB->TargetID, TRMREG_SCSI_TARGETID); trm_reg_write8(pDCB->SyncPeriod, TRMREG_SCSI_SYNC); trm_reg_write8(pDCB->SyncOffset, TRMREG_SCSI_OFFSET); pSRB->ScsiPhase = PH_BUS_FREE;/* initial phase */ /* Flush FIFO */ trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL); identify_message = pDCB->IdentifyMsg; if ((pSRB->CmdBlock[0] == INQUIRY) || (pSRB->CmdBlock[0] == REQUEST_SENSE) || (pSRB->SRBFlag & AUTO_REQSENSE)) { if (((pDCB->SyncMode & WIDE_NEGO_ENABLE) && !(pDCB->SyncMode & WIDE_NEGO_DONE)) || ((pDCB->SyncMode & SYNC_NEGO_ENABLE) && !(pDCB->SyncMode & SYNC_NEGO_DONE))) { if (!(pDCB->IdentifyMsg & 7) || (pSRB->CmdBlock[0] != INQUIRY)) { scsicommand = SCMD_SEL_ATNSTOP; pSRB->SRBState = SRB_MSGOUT; goto polling; } } /* * Send identify message */ trm_reg_write8((identify_message & 0xBF) ,TRMREG_SCSI_FIFO); scsicommand = SCMD_SEL_ATN; pSRB->SRBState = SRB_START_; } else { /* not inquiry,request sense,auto request sense */ /* * Send identify message */ trm_reg_write8(identify_message,TRMREG_SCSI_FIFO); scsicommand = SCMD_SEL_ATN; pSRB->SRBState = SRB_START_; if (pDCB->SyncMode & EN_TAG_QUEUING) { /* Send Tag message */ trm_reg_write8(MSG_SIMPLE_QTAG, TRMREG_SCSI_FIFO); trm_reg_write8(pSRB->TagNumber, TRMREG_SCSI_FIFO); scsicommand = SCMD_SEL_ATN3; } } polling: /* * Send CDB ..command block ......... */ if (pSRB->SRBFlag & AUTO_REQSENSE) { trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO); trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); } else { ptr = (u_int8_t *) pSRB->CmdBlock; for (i = 0; i < pSRB->ScsiCmdLen ; i++) { command = *ptr++; trm_reg_write8(command,TRMREG_SCSI_FIFO); } } if (trm_reg_read16(TRMREG_SCSI_STATUS) & SCSIINTERRUPT) { /* * If trm_StartSCSI return 1 : * current interrupt status is interrupt disreenable * It's said that SCSI processor has more one SRB need to do, * SCSI processor has been occupied by one SRB. */ pSRB->SRBState = SRB_READY; return_code = 1; } else { /* * If trm_StartSCSI return 0 : * current interrupt status is interrupt enable * It's said that SCSI processor is unoccupied */ pSRB->ScsiPhase = SCSI_NOP1; /* SCSI bus free Phase */ pACB->pActiveDCB = pDCB; pDCB->pActiveSRB = pSRB; return_code = 0; trm_reg_write16(DO_DATALATCH | DO_HWRESELECT, TRMREG_SCSI_CONTROL);/* it's important for atn stop*/ /* * SCSI cammand */ trm_reg_write8(scsicommand,TRMREG_SCSI_COMMAND); } return (return_code); } static void trm_Interrupt(vpACB) void *vpACB; { PACB pACB; PDCB pDCB; PSRB pSRB; u_int16_t phase; void (*stateV)(PACB, PSRB, u_int16_t *); u_int16_t scsi_status=0; u_int8_t scsi_intstatus; pACB = vpACB; scsi_status = trm_reg_read16(TRMREG_SCSI_STATUS); if (!(scsi_status & SCSIINTERRUPT)) { TRM_DPRINTF("trm_Interrupt: TRMREG_SCSI_STATUS scsi_status = NULL ,return......"); return; } TRM_DPRINTF("scsi_status=%2x,",scsi_status); scsi_intstatus = trm_reg_read8(TRMREG_SCSI_INTSTATUS); TRM_DPRINTF("scsi_intstatus=%2x,",scsi_intstatus); if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) { trm_Disconnect(pACB); return; } if (scsi_intstatus & INT_RESELECTED) { trm_Reselect(pACB); return; } if (scsi_intstatus & INT_SCSIRESET) { trm_ScsiRstDetect(pACB); return; } if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) { pDCB = pACB->pActiveDCB; KASSERT(pDCB != NULL, ("no active DCB")); pSRB = pDCB->pActiveSRB; if (pDCB->DCBFlag & ABORT_DEV_) trm_EnableMsgOutAbort1(pACB, pSRB); phase = (u_int16_t) pSRB->ScsiPhase; /* phase: */ stateV = (void *) trm_SCSI_phase0[phase]; stateV(pACB, pSRB, &scsi_status); pSRB->ScsiPhase = scsi_status & PHASEMASK; /* phase:0,1,2,3,4,5,6,7 */ phase = (u_int16_t) scsi_status & PHASEMASK; stateV = (void *) trm_SCSI_phase1[phase]; stateV(pACB, pSRB, &scsi_status); } } static void trm_MsgOutPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { if (pSRB->SRBState & (SRB_UNEXPECT_RESEL+SRB_ABORT_SENT)) *pscsi_status = PH_BUS_FREE; /*.. initial phase*/ } static void trm_MsgOutPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { u_int8_t bval; u_int16_t i, cnt; u_int8_t * ptr; PDCB pDCB; trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL); pDCB = pACB->pActiveDCB; if (!(pSRB->SRBState & SRB_MSGOUT)) { cnt = pSRB->MsgCnt; if (cnt) { ptr = (u_int8_t *) pSRB->MsgOutBuf; for (i = 0; i < cnt; i++) { trm_reg_write8(*ptr, TRMREG_SCSI_FIFO); ptr++; } pSRB->MsgCnt = 0; if ((pDCB->DCBFlag & ABORT_DEV_) && (pSRB->MsgOutBuf[0] == MSG_ABORT)) { pSRB->SRBState = SRB_ABORT_SENT; } } else { bval = MSG_ABORT; if ((pSRB->CmdBlock[0] == INQUIRY) || (pSRB->CmdBlock[0] == REQUEST_SENSE) || (pSRB->SRBFlag & AUTO_REQSENSE)) { if (pDCB->SyncMode & SYNC_NEGO_ENABLE) { goto mop1; } } trm_reg_write8(bval, TRMREG_SCSI_FIFO); } } else { mop1: /* message out phase */ if (!(pSRB->SRBState & SRB_DO_WIDE_NEGO) && (pDCB->SyncMode & WIDE_NEGO_ENABLE)) { /* * WIDE DATA TRANSFER REQUEST code (03h) */ pDCB->SyncMode &= ~(SYNC_NEGO_DONE | EN_ATN_STOP); trm_reg_write8((pDCB->IdentifyMsg & 0xBF), TRMREG_SCSI_FIFO); trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO); /* (01h) */ trm_reg_write8(2,TRMREG_SCSI_FIFO); /* Message length (02h) */ trm_reg_write8(3,TRMREG_SCSI_FIFO); /* wide data xfer (03h) */ trm_reg_write8(1,TRMREG_SCSI_FIFO); /* width:0(8bit),1(16bit),2(32bit) */ pSRB->SRBState |= SRB_DO_WIDE_NEGO; } else if (!(pSRB->SRBState & SRB_DO_SYNC_NEGO) && (pDCB->SyncMode & SYNC_NEGO_ENABLE)) { /* * SYNCHRONOUS DATA TRANSFER REQUEST code (01h) */ if (!(pDCB->SyncMode & WIDE_NEGO_DONE)) trm_reg_write8((pDCB->IdentifyMsg & 0xBF), TRMREG_SCSI_FIFO); trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO); /* (01h) */ trm_reg_write8(3,TRMREG_SCSI_FIFO); /* Message length (03h) */ trm_reg_write8(1,TRMREG_SCSI_FIFO); /* SYNCHRONOUS DATA TRANSFER REQUEST code (01h) */ trm_reg_write8(pDCB->MaxNegoPeriod,TRMREG_SCSI_FIFO); /* Transfer peeriod factor */ trm_reg_write8((pACB->AdaptType == 1) ? 31 : 15, TRMREG_SCSI_FIFO); /* REQ/ACK offset */ pSRB->SRBState |= SRB_DO_SYNC_NEGO; } } trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND); } static void trm_CommandPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { } static void trm_CommandPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { PDCB pDCB; u_int8_t * ptr; u_int16_t i, cnt; union ccb *pccb; struct ccb_scsiio *pcsio; pccb = pSRB->pccb; pcsio = &pccb->csio; trm_reg_write16(DO_CLRATN | DO_CLRFIFO , TRMREG_SCSI_CONTROL); if (!(pSRB->SRBFlag & AUTO_REQSENSE)) { cnt = (u_int16_t) pSRB->ScsiCmdLen; ptr = (u_int8_t *) pSRB->CmdBlock; for (i = 0; i < cnt; i++) { trm_reg_write8(*ptr, TRMREG_SCSI_FIFO); ptr++; } } else { trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO); pDCB = pACB->pActiveDCB; /* target id */ trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); /* sizeof(struct scsi_sense_data) */ trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO); trm_reg_write8(0, TRMREG_SCSI_FIFO); } pSRB->SRBState = SRB_COMMAND; trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop*/ /* * SCSI cammand */ trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND); } static void trm_DataOutPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { PDCB pDCB; u_int8_t TempDMAstatus,SGIndexTemp; u_int16_t scsi_status; PSEG pseg; u_long TempSRBXferredLength,dLeftCounter=0; pDCB = pSRB->pSRBDCB; scsi_status = *pscsi_status; if (!(pSRB->SRBState & SRB_XFERPAD)) { if (scsi_status & PARITYERROR) pSRB->SRBStatus |= PARITY_ERROR; if (!(scsi_status & SCSIXFERDONE)) { /* * when data transfer from DMA FIFO to SCSI FIFO * if there was some data left in SCSI FIFO */ dLeftCounter = (u_long) (trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x3F); if (pDCB->SyncPeriod & WIDE_SYNC) { /* * if WIDE scsi SCSI FIFOCNT unit is word * so need to * 2 */ dLeftCounter <<= 1; } } /* * caculate all the residue data that not yet tranfered * SCSI transfer counter + left in SCSI FIFO data * * .....TRM_SCSI_COUNTER (24bits) * The counter always decrement by one for every SCSI byte *transfer. * .....TRM_SCSI_FIFOCNT (5bits) * The counter is SCSI FIFO offset counter */ dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER); if (dLeftCounter == 1) { dLeftCounter = 0; trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL); } if ((dLeftCounter == 0) || (scsi_status & SCSIXFERCNT_2_ZERO)) { TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS); while (!(TempDMAstatus & DMAXFERCOMP)) { TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS); } pSRB->SRBTotalXferLength = 0; } else { /* Update SG list */ /* * if transfer not yet complete * there were some data residue in SCSI FIFO or * SCSI transfer counter not empty */ if (pSRB->SRBTotalXferLength != dLeftCounter) { /* * data that had transferred length */ TempSRBXferredLength = pSRB->SRBTotalXferLength - dLeftCounter; /* * next time to be transferred length */ pSRB->SRBTotalXferLength = dLeftCounter; /* * parsing from last time disconnect SRBSGIndex */ pseg = pSRB->pSRBSGL + pSRB->SRBSGIndex; for (SGIndexTemp = pSRB->SRBSGIndex; SGIndexTemp < pSRB->SRBSGCount; SGIndexTemp++) { /* * find last time which SG transfer be * disconnect */ if (TempSRBXferredLength >= pseg->length) TempSRBXferredLength -= pseg->length; else { /* * update last time disconnected SG * list */ pseg->length -= TempSRBXferredLength; /* residue data length */ pseg->address += TempSRBXferredLength; /* residue data pointer */ pSRB->SRBSGIndex = SGIndexTemp; break; } pseg++; } } } } trm_reg_write8(STOPDMAXFER ,TRMREG_DMA_CONTROL); } static void trm_DataOutPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { u_int16_t ioDir; /* * do prepare befor transfer when data out phase */ ioDir = XFERDATAOUT; trm_DataIO_transfer(pACB, pSRB, ioDir); } static void trm_DataInPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { u_int8_t TempDMAstatus, SGIndexTemp; u_int16_t scsi_status; PSEG pseg; u_long TempSRBXferredLength,dLeftCounter = 0; scsi_status = *pscsi_status; if (!(pSRB->SRBState & SRB_XFERPAD)) { if (scsi_status & PARITYERROR) pSRB->SRBStatus |= PARITY_ERROR; dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER); if ((dLeftCounter == 0) || (scsi_status & SCSIXFERCNT_2_ZERO)) { TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS); while (!(TempDMAstatus & DMAXFERCOMP)) TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS); pSRB->SRBTotalXferLength = 0; } else { /* * parsing the case: * when a transfer not yet complete * but be disconnected by uper layer * if transfer not yet complete * there were some data residue in SCSI FIFO or * SCSI transfer counter not empty */ if (pSRB->SRBTotalXferLength != dLeftCounter) { /* * data that had transferred length */ TempSRBXferredLength = pSRB->SRBTotalXferLength - dLeftCounter; /* * next time to be transferred length */ pSRB->SRBTotalXferLength = dLeftCounter; /* * parsing from last time disconnect SRBSGIndex */ pseg = pSRB->pSRBSGL + pSRB->SRBSGIndex; for (SGIndexTemp = pSRB->SRBSGIndex; SGIndexTemp < pSRB->SRBSGCount; SGIndexTemp++) { /* * find last time which SG transfer be disconnect */ if (TempSRBXferredLength >= pseg->length) TempSRBXferredLength -= pseg->length; else { /* * update last time disconnected SG list */ pseg->length -= TempSRBXferredLength; /* residue data length */ pseg->address += TempSRBXferredLength; /* residue data pointer */ pSRB->SRBSGIndex = SGIndexTemp; break; } pseg++; } } } } } static void trm_DataInPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { u_int16_t ioDir; /* * do prepare befor transfer when data in phase */ ioDir = XFERDATAIN; trm_DataIO_transfer(pACB, pSRB, ioDir); } static void trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir) { u_int8_t bval; PDCB pDCB; pDCB = pSRB->pSRBDCB; if (pSRB->SRBSGIndex < pSRB->SRBSGCount) { if (pSRB->SRBTotalXferLength != 0) { /* * load what physical address of Scatter/Gather list table want to be transfer */ TRM_DPRINTF(" SG->address=%8x \n",pSRB->pSRBSGL->address); TRM_DPRINTF(" SG->length=%8x \n",pSRB->pSRBSGL->length); TRM_DPRINTF(" pDCB->SyncPeriod=%x \n",pDCB->SyncPeriod); TRM_DPRINTF(" pSRB->pSRBSGL=%8x \n",(unsigned int)pSRB->pSRBSGL); TRM_DPRINTF(" pSRB->SRBSGPhyAddr=%8x \n",pSRB->SRBSGPhyAddr); TRM_DPRINTF(" pSRB->SRBSGIndex=%d \n",pSRB->SRBSGIndex); TRM_DPRINTF(" pSRB->SRBSGCount=%d \n",pSRB->SRBSGCount); TRM_DPRINTF(" pSRB->SRBTotalXferLength=%d \n",pSRB->SRBTotalXferLength); pSRB->SRBState = SRB_DATA_XFER; trm_reg_write32(0, TRMREG_DMA_XHIGHADDR); trm_reg_write32( (pSRB->SRBSGPhyAddr + ((u_long)pSRB->SRBSGIndex << 3)), TRMREG_DMA_XLOWADDR); /* * load how many bytes in the Scatter/Gather * list table */ trm_reg_write32( ((u_long)(pSRB->SRBSGCount - pSRB->SRBSGIndex) << 3), TRMREG_DMA_XCNT); /* * load total transfer length (24bits) max value * 16Mbyte */ trm_reg_write32(pSRB->SRBTotalXferLength, TRMREG_SCSI_COUNTER); /* Start DMA transfer */ trm_reg_write16(ioDir, TRMREG_DMA_COMMAND); /* Start SCSI transfer */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ bval = (ioDir == XFERDATAOUT) ? SCMD_DMA_OUT : SCMD_DMA_IN; trm_reg_write8(bval, TRMREG_SCSI_COMMAND); } else { /* xfer pad */ if (pSRB->SRBSGCount) { pSRB->AdaptStatus = H_OVER_UNDER_RUN; pSRB->SRBStatus |= OVER_RUN; } if (pDCB->SyncPeriod & WIDE_SYNC) trm_reg_write32(2,TRMREG_SCSI_COUNTER); else trm_reg_write32(1,TRMREG_SCSI_COUNTER); if (ioDir == XFERDATAOUT) trm_reg_write16(0, TRMREG_SCSI_FIFO); else trm_reg_read16(TRMREG_SCSI_FIFO); pSRB->SRBState |= SRB_XFERPAD; trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ bval = (ioDir == XFERDATAOUT) ? SCMD_FIFO_OUT : SCMD_FIFO_IN; trm_reg_write8(bval, TRMREG_SCSI_COMMAND); } } } static void trm_StatusPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { pSRB->TargetStatus = trm_reg_read8(TRMREG_SCSI_FIFO); pSRB->SRBState = SRB_COMPLETED; *pscsi_status = PH_BUS_FREE; /*.. initial phase*/ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); } static void trm_StatusPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { if (trm_reg_read16(TRMREG_DMA_COMMAND) & 0x0001) { if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40)) trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL); if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000)) trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL); } else { if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000)) trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL); if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40)) trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL); } pSRB->SRBState = SRB_STATUS; trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_COMP, TRMREG_SCSI_COMMAND); } /* *scsiiom * trm_MsgInPhase0: one of trm_SCSI_phase0[] vectors * stateV = (void *) trm_SCSI_phase0[phase] * if phase =7 * extended message codes: * * code description * * 02h Reserved * 00h MODIFY DATA POINTER * 01h SYNCHRONOUS DATA TRANSFER REQUEST * 03h WIDE DATA TRANSFER REQUEST * 04h - 7Fh Reserved * 80h - FFh Vendor specific * */ static void trm_MsgInPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { u_int8_t message_in_code,bIndex,message_in_tag_id; PDCB pDCB; PSRB pSRBTemp; pDCB = pACB->pActiveDCB; message_in_code = trm_reg_read8(TRMREG_SCSI_FIFO); if (!(pSRB->SRBState & SRB_EXTEND_MSGIN)) { if (message_in_code == MSG_DISCONNECT) { pSRB->SRBState = SRB_DISCONNECT; *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if (message_in_code == MSG_SAVE_PTR) { *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if ((message_in_code == MSG_EXTENDED) || ((message_in_code >= MSG_SIMPLE_QTAG) && (message_in_code <= MSG_ORDER_QTAG))) { pSRB->SRBState |= SRB_EXTEND_MSGIN; pSRB->MsgInBuf[0] = message_in_code; /* extended message (01h) */ pSRB->MsgCnt = 1; pSRB->pMsgPtr = &pSRB->MsgInBuf[1]; /* extended message length (n) */ *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if (message_in_code == MSG_REJECT_) { /* Reject message */ if (pDCB->SyncMode & WIDE_NEGO_ENABLE) { /* do wide nego reject */ pDCB = pSRB->pSRBDCB; pDCB->SyncMode |= WIDE_NEGO_DONE; pDCB->SyncMode &= ~(SYNC_NEGO_DONE | EN_ATN_STOP | WIDE_NEGO_ENABLE); pSRB->SRBState &= ~(SRB_DO_WIDE_NEGO+SRB_MSGIN); if ((pDCB->SyncMode & SYNC_NEGO_ENABLE) && !(pDCB->SyncMode & SYNC_NEGO_DONE)) { /* Set ATN, in case ATN was clear */ pSRB->SRBState |= SRB_MSGOUT; trm_reg_write16( DO_SETATN, TRMREG_SCSI_CONTROL); } else { /* Clear ATN */ trm_reg_write16( DO_CLRATN, TRMREG_SCSI_CONTROL); } } else if (pDCB->SyncMode & SYNC_NEGO_ENABLE) { /* do sync nego reject */ trm_reg_write16(DO_CLRATN,TRMREG_SCSI_CONTROL); if (pSRB->SRBState & SRB_DO_SYNC_NEGO) { pDCB = pSRB->pSRBDCB; pDCB->SyncMode &= ~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE); pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; /* * * program SCSI control register * */ trm_reg_write8(pDCB->SyncPeriod, TRMREG_SCSI_SYNC); trm_reg_write8(pDCB->SyncOffset, TRMREG_SCSI_OFFSET); trm_SetXferRate(pACB,pSRB,pDCB); } } *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if (message_in_code == MSG_IGNOREWIDE) { trm_reg_write32(1, TRMREG_SCSI_COUNTER); trm_reg_read8(TRMREG_SCSI_FIFO); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else { /* Restore data pointer message */ /* Save data pointer message */ /* Completion message */ /* NOP message */ *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } } else { /* * Parsing incomming extented messages */ *pSRB->pMsgPtr = message_in_code; pSRB->MsgCnt++; pSRB->pMsgPtr++; TRM_DPRINTF("pSRB->MsgInBuf[0]=%2x \n ",pSRB->MsgInBuf[0]); TRM_DPRINTF("pSRB->MsgInBuf[1]=%2x \n ",pSRB->MsgInBuf[1]); TRM_DPRINTF("pSRB->MsgInBuf[2]=%2x \n ",pSRB->MsgInBuf[2]); TRM_DPRINTF("pSRB->MsgInBuf[3]=%2x \n ",pSRB->MsgInBuf[3]); TRM_DPRINTF("pSRB->MsgInBuf[4]=%2x \n ",pSRB->MsgInBuf[4]); if ((pSRB->MsgInBuf[0] >= MSG_SIMPLE_QTAG) && (pSRB->MsgInBuf[0] <= MSG_ORDER_QTAG)) { /* * is QUEUE tag message : * * byte 0: * HEAD QUEUE TAG (20h) * ORDERED QUEUE TAG (21h) * SIMPLE QUEUE TAG (22h) * byte 1: * Queue tag (00h - FFh) */ if (pSRB->MsgCnt == 2) { pSRB->SRBState = 0; message_in_tag_id = pSRB->MsgInBuf[1]; pSRB = pDCB->pGoingSRB; pSRBTemp = pDCB->pGoingLastSRB; if (pSRB) { for (;;) { if (pSRB->TagNumber != message_in_tag_id) { if (pSRB == pSRBTemp) { goto mingx0; } pSRB = pSRB->pNextSRB; } else break; } if (pDCB->DCBFlag & ABORT_DEV_) { pSRB->SRBState = SRB_ABORT_SENT; trm_EnableMsgOutAbort1( pACB, pSRB); } if (!(pSRB->SRBState & SRB_DISCONNECT)) { TRM_DPRINTF("SRB not yet disconnect........ \n "); goto mingx0; } pDCB->pActiveSRB = pSRB; pSRB->SRBState = SRB_DATA_XFER; } else { mingx0: pSRB = &pACB->TmpSRB; pSRB->SRBState = SRB_UNEXPECT_RESEL; pDCB->pActiveSRB = pSRB; pSRB->MsgOutBuf[0] = MSG_ABORT_TAG; trm_EnableMsgOutAbort2( pACB, pSRB); } } *pscsi_status = PH_BUS_FREE; /* .. initial phase */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) && (pSRB->MsgInBuf[2] == 3) && (pSRB->MsgCnt == 4)) { /* * is Wide data xfer Extended message : * ====================================== * WIDE DATA TRANSFER REQUEST * ====================================== * byte 0 : Extended message (01h) * byte 1 : Extended message length (02h) * byte 2 : WIDE DATA TRANSFER code (03h) * byte 3 : Transfer width exponent */ pDCB = pSRB->pSRBDCB; pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_WIDE_NEGO); if ((pSRB->MsgInBuf[1] != 2)) { /* Length is wrong, reject it */ pDCB->SyncMode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); pSRB->MsgCnt = 1; pSRB->MsgInBuf[0] = MSG_REJECT_; trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } if (pDCB->SyncMode & WIDE_NEGO_ENABLE) { /* Do wide negoniation */ if (pSRB->MsgInBuf[3] > 2) { /* > 32 bit */ /* reject_msg: */ pDCB->SyncMode &= ~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE); pSRB->MsgCnt = 1; pSRB->MsgInBuf[0] = MSG_REJECT_; trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } if (pSRB->MsgInBuf[3] == 2) { pSRB->MsgInBuf[3] = 1; /* do 16 bits */ } else { if (!(pDCB->SyncMode & WIDE_NEGO_DONE)) { pSRB->SRBState &= ~(SRB_DO_WIDE_NEGO+SRB_MSGIN); pDCB->SyncMode |= WIDE_NEGO_DONE; pDCB->SyncMode &= ~(SYNC_NEGO_DONE | EN_ATN_STOP | WIDE_NEGO_ENABLE); if (pSRB->MsgInBuf[3] != 0) { /* is Wide data xfer */ pDCB->SyncPeriod |= WIDE_SYNC; pDCB->tinfo.current.width = MSG_EXT_WDTR_BUS_16_BIT; pDCB->tinfo.goal.width = MSG_EXT_WDTR_BUS_16_BIT; } } } } else pSRB->MsgInBuf[3] = 0; pSRB->SRBState |= SRB_MSGOUT; trm_reg_write16(DO_SETATN,TRMREG_SCSI_CONTROL); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ /* it's important for atn stop */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* * SCSI command */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) && (pSRB->MsgInBuf[2] == 1) && (pSRB->MsgCnt == 5)) { /* * is 8bit transfer Extended message : * ================================= * SYNCHRONOUS DATA TRANSFER REQUEST * ================================= * byte 0 : Extended message (01h) * byte 1 : Extended message length (03) * byte 2 : SYNCHRONOUS DATA TRANSFER code (01h) * byte 3 : Transfer period factor * byte 4 : REQ/ACK offset */ pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_SYNC_NEGO); if ((pSRB->MsgInBuf[1] != 3) || (pSRB->MsgInBuf[2] != 1)) { /* reject_msg: */ pSRB->MsgCnt = 1; pSRB->MsgInBuf[0] = MSG_REJECT_; trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else if (!(pSRB->MsgInBuf[3]) || !(pSRB->MsgInBuf[4])) { /* set async */ pDCB = pSRB->pSRBDCB; /* disable sync & sync nego */ pDCB->SyncMode &= ~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE); pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; pDCB->tinfo.goal.period = 0; pDCB->tinfo.goal.offset = 0; pDCB->tinfo.current.period = 0; pDCB->tinfo.current.offset = 0; pDCB->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT; /* * * program SCSI control register * */ trm_reg_write8(pDCB->SyncPeriod,TRMREG_SCSI_SYNC); trm_reg_write8(pDCB->SyncOffset,TRMREG_SCSI_OFFSET); trm_SetXferRate(pACB,pSRB,pDCB); *pscsi_status = PH_BUS_FREE; /* .. initial phase */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); return; } else { /* set sync */ pDCB = pSRB->pSRBDCB; pDCB->SyncMode |= SYNC_NEGO_ENABLE+SYNC_NEGO_DONE; pDCB->MaxNegoPeriod = pSRB->MsgInBuf[3]; /* Transfer period factor */ pDCB->SyncOffset = pSRB->MsgInBuf[4]; /* REQ/ACK offset */ if (pACB->AdaptType == 1) { for(bIndex = 0; bIndex < 7; bIndex++) { if (pSRB->MsgInBuf[3] <= dc395u2x_clock_period[bIndex]) { pDCB->tinfo.goal.period = dc395u2x_tinfo_period[bIndex]; pDCB->tinfo.current.period = dc395u2x_tinfo_period[bIndex]; pDCB->tinfo.goal.offset = pDCB->SyncOffset; pDCB->tinfo.current.offset = pDCB->SyncOffset; pDCB->SyncPeriod |= (bIndex|LVDS_SYNC); break; } } } else { for(bIndex = 0; bIndex < 7; bIndex++) { if (pSRB->MsgInBuf[3] <= dc395x_clock_period[bIndex]) { pDCB->tinfo.goal.period = dc395x_tinfo_period[bIndex]; pDCB->tinfo.current.period = dc395x_tinfo_period[bIndex]; pDCB->tinfo.goal.offset = pDCB->SyncOffset; pDCB->tinfo.current.offset = pDCB->SyncOffset; pDCB->SyncPeriod |= (bIndex|ALT_SYNC); break; } } } /* * * program SCSI control register * */ trm_reg_write8(pDCB->SyncPeriod, TRMREG_SCSI_SYNC); trm_reg_write8(pDCB->SyncOffset, TRMREG_SCSI_OFFSET); trm_SetXferRate(pACB,pSRB,pDCB); *pscsi_status=PH_BUS_FREE;/*.. initial phase*/ trm_reg_write16(DO_DATALATCH,TRMREG_SCSI_CONTROL);/* it's important for atn stop*/ /* ** SCSI command */ trm_reg_write8(SCMD_MSGACCEPT,TRMREG_SCSI_COMMAND); return; } } *pscsi_status = PH_BUS_FREE; /* .. initial phase */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop */ /* * SCSI cammand */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); } } static void trm_MsgInPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL); trm_reg_write32(1,TRMREG_SCSI_COUNTER); if (!(pSRB->SRBState & SRB_MSGIN)) { pSRB->SRBState &= SRB_DISCONNECT; pSRB->SRBState |= SRB_MSGIN; } trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop*/ /* * SCSI cammand */ trm_reg_write8(SCMD_FIFO_IN, TRMREG_SCSI_COMMAND); } static void trm_Nop0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { } static void trm_Nop1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status) { } static void trm_SetXferRate(PACB pACB,PSRB pSRB, PDCB pDCB) { union ccb *pccb; struct ccb_trans_settings neg; u_int16_t cnt, i; u_int8_t bval; PDCB pDCBTemp; /* * set all lun device's period , offset */ TRM_DPRINTF("trm_SetXferRate\n"); pccb = pSRB->pccb; memset(&neg, 0, sizeof (neg)); neg.xport_specific.spi.sync_period = pDCB->tinfo.goal.period; neg.xport_specific.spi.sync_offset = pDCB->tinfo.goal.offset; neg.xport_specific.spi.valid = CTS_SPI_VALID_SYNC_RATE | CTS_SPI_VALID_SYNC_OFFSET; xpt_setup_ccb(&neg.ccb_h, pccb->ccb_h.path, /* priority */1); xpt_async(AC_TRANSFER_NEG, pccb->ccb_h.path, &neg); if (!(pDCB->IdentifyMsg & 0x07)) { pDCBTemp = pACB->pLinkDCB; cnt = pACB->DeviceCnt; bval = pDCB->TargetID; for (i = 0; i < cnt; i++) { if (pDCBTemp->TargetID == bval) { pDCBTemp->SyncPeriod = pDCB->SyncPeriod; pDCBTemp->SyncOffset = pDCB->SyncOffset; pDCBTemp->SyncMode = pDCB->SyncMode; } pDCBTemp = pDCBTemp->pNextDCB; } } return; } /* * scsiiom * trm_Interrupt * * * ---SCSI bus phase * * PH_DATA_OUT 0x00 Data out phase * PH_DATA_IN 0x01 Data in phase * PH_COMMAND 0x02 Command phase * PH_STATUS 0x03 Status phase * PH_BUS_FREE 0x04 Invalid phase used as bus free * PH_BUS_FREE 0x05 Invalid phase used as bus free * PH_MSG_OUT 0x06 Message out phase * PH_MSG_IN 0x07 Message in phase * */ static void trm_Disconnect(PACB pACB) { PDCB pDCB; PSRB pSRB, psrb; u_int16_t i,j, cnt; u_int target_id,target_lun; TRM_DPRINTF("trm_Disconnect...............\n "); pDCB = pACB->pActiveDCB; if (!pDCB) { TRM_DPRINTF(" Exception Disconnect DCB=NULL..............\n "); j = 400; while (--j) DELAY(1); /* 1 msec */ trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT), TRMREG_SCSI_CONTROL); return; } pSRB = pDCB->pActiveSRB; /* bug pSRB=0 */ target_id = pSRB->pccb->ccb_h.target_id; target_lun = pSRB->pccb->ccb_h.target_lun; TRM_DPRINTF(":pDCB->pActiveSRB= %8x \n ",(u_int) pDCB->pActiveSRB); pACB->pActiveDCB = 0; pSRB->ScsiPhase = PH_BUS_FREE; /* SCSI bus free Phase */ trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT), TRMREG_SCSI_CONTROL); if (pSRB->SRBState & SRB_UNEXPECT_RESEL) { pSRB->SRBState = 0; trm_DoWaitingSRB(pACB); } else if (pSRB->SRBState & SRB_ABORT_SENT) { pDCB->DCBFlag = 0; cnt = pDCB->GoingSRBCnt; pDCB->GoingSRBCnt = 0; pSRB = pDCB->pGoingSRB; for (i = 0; i < cnt; i++) { psrb = pSRB->pNextSRB; pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; pSRB = psrb; } pDCB->pGoingSRB = 0; trm_DoWaitingSRB(pACB); } else { if ((pSRB->SRBState & (SRB_START_+SRB_MSGOUT)) || !(pSRB->SRBState & (SRB_DISCONNECT+SRB_COMPLETED))) { /* Selection time out */ if (!(pACB->scan_devices[target_id][target_lun]) && pSRB->CmdBlock[0] != 0x00 && /* TEST UNIT READY */ pSRB->CmdBlock[0] != INQUIRY) { pSRB->SRBState = SRB_READY; trm_RewaitSRB(pDCB, pSRB); } else { pSRB->TargetStatus = SCSI_STAT_SEL_TIMEOUT; goto disc1; } } else if (pSRB->SRBState & SRB_DISCONNECT) { /* * SRB_DISCONNECT */ trm_DoWaitingSRB(pACB); } else if (pSRB->SRBState & SRB_COMPLETED) { disc1: /* * SRB_COMPLETED */ pDCB->pActiveSRB = 0; pSRB->SRBState = SRB_FREE; trm_SRBdone(pACB, pDCB, pSRB); } } return; } static void trm_Reselect(PACB pACB) { PDCB pDCB; PSRB pSRB; u_int16_t RselTarLunId; TRM_DPRINTF("trm_Reselect................. \n"); pDCB = pACB->pActiveDCB; if (pDCB) { /* Arbitration lost but Reselection win */ pSRB = pDCB->pActiveSRB; pSRB->SRBState = SRB_READY; trm_RewaitSRB(pDCB, pSRB); } /* Read Reselected Target Id and LUN */ RselTarLunId = trm_reg_read16(TRMREG_SCSI_TARGETID) & 0x1FFF; pDCB = pACB->pLinkDCB; while (RselTarLunId != *((u_int16_t *) &pDCB->TargetID)) { /* get pDCB of the reselect id */ pDCB = pDCB->pNextDCB; } pACB->pActiveDCB = pDCB; if (pDCB->SyncMode & EN_TAG_QUEUING) { pSRB = &pACB->TmpSRB; pDCB->pActiveSRB = pSRB; } else { pSRB = pDCB->pActiveSRB; if (!pSRB || !(pSRB->SRBState & SRB_DISCONNECT)) { /* * abort command */ pSRB = &pACB->TmpSRB; pSRB->SRBState = SRB_UNEXPECT_RESEL; pDCB->pActiveSRB = pSRB; trm_EnableMsgOutAbort1(pACB, pSRB); } else { if (pDCB->DCBFlag & ABORT_DEV_) { pSRB->SRBState = SRB_ABORT_SENT; trm_EnableMsgOutAbort1(pACB, pSRB); } else pSRB->SRBState = SRB_DATA_XFER; } } pSRB->ScsiPhase = PH_BUS_FREE; /* SCSI bus free Phase */ /* * Program HA ID, target ID, period and offset */ trm_reg_write8((u_int8_t) RselTarLunId,TRMREG_SCSI_TARGETID); /* target ID */ trm_reg_write8(pACB->AdaptSCSIID,TRMREG_SCSI_HOSTID); /* host ID */ trm_reg_write8(pDCB->SyncPeriod,TRMREG_SCSI_SYNC); /* period */ trm_reg_write8(pDCB->SyncOffset,TRMREG_SCSI_OFFSET); /* offset */ trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL); /* it's important for atn stop*/ /* * SCSI cammand */ trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND); /* to rls the /ACK signal */ } static void trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB) { PSRB psrb; u_int8_t bval, bval1,status; union ccb *pccb; struct ccb_scsiio *pcsio; PSCSI_INQDATA ptr; int intflag; u_int target_id,target_lun; PDCB pTempDCB; pccb = pSRB->pccb; if (pccb == NULL) return; pcsio = &pccb->csio; target_id = pSRB->pccb->ccb_h.target_id; target_lun = pSRB->pccb->ccb_h.target_lun; if ((pccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) { bus_dmasync_op_t op; if ((pccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) op = BUS_DMASYNC_POSTREAD; else op = BUS_DMASYNC_POSTWRITE; bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op); bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap); } /* * * target status * */ status = pSRB->TargetStatus; pcsio->scsi_status=SCSI_STAT_GOOD; pccb->ccb_h.status = CAM_REQ_CMP; if (pSRB->SRBFlag & AUTO_REQSENSE) { /* * status of auto request sense */ pSRB->SRBFlag &= ~AUTO_REQSENSE; pSRB->AdaptStatus = 0; pSRB->TargetStatus = SCSI_STATUS_CHECK_COND; if (status == SCSI_STATUS_CHECK_COND) { pccb->ccb_h.status = CAM_SEL_TIMEOUT; goto ckc_e; } *((u_long *) &(pSRB->CmdBlock[0])) = pSRB->Segment0[0]; *((u_long *) &(pSRB->CmdBlock[4])) = pSRB->Segment0[1]; pSRB->SRBTotalXferLength = pSRB->Segment1[1]; pSRB->pSRBSGL->address = pSRB->SgSenseTemp.address; pSRB->pSRBSGL->length = pSRB->SgSenseTemp.length; pcsio->scsi_status = SCSI_STATUS_CHECK_COND; bcopy(trm_get_sense_buf(pACB, pSRB), &pcsio->sense_data, pcsio->sense_len); pcsio->ccb_h.status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; goto ckc_e; } /* * target status */ if (status) { if (status == SCSI_STATUS_CHECK_COND) { if ((pcsio->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0) { TRM_DPRINTF("trm_RequestSense..................\n"); trm_RequestSense(pACB, pDCB, pSRB); return; } pcsio->scsi_status = SCSI_STATUS_CHECK_COND; pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; goto ckc_e; } else if (status == SCSI_STAT_QUEUEFULL) { bval = (u_int8_t) pDCB->GoingSRBCnt; bval--; pDCB->MaxActiveCommandCnt = bval; trm_RewaitSRB(pDCB, pSRB); pSRB->AdaptStatus = 0; pSRB->TargetStatus = 0; return; } else if (status == SCSI_STAT_SEL_TIMEOUT) { pSRB->AdaptStatus = H_SEL_TIMEOUT; pSRB->TargetStatus = 0; pcsio->scsi_status = SCSI_STAT_SEL_TIMEOUT; pccb->ccb_h.status = CAM_SEL_TIMEOUT; } else if (status == SCSI_STAT_BUSY) { TRM_DPRINTF("trm: target busy at %s %d\n", __FILE__, __LINE__); pcsio->scsi_status = SCSI_STAT_BUSY; pccb->ccb_h.status = CAM_SCSI_BUSY; return; /* The device busy, try again later? */ } else if (status == SCSI_STAT_RESCONFLICT) { TRM_DPRINTF("trm: target reserved at %s %d\n", __FILE__, __LINE__); pcsio->scsi_status = SCSI_STAT_RESCONFLICT; pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; /*XXX*/ return; } else { pSRB->AdaptStatus = 0; if (pSRB->RetryCnt) { pSRB->RetryCnt--; pSRB->TargetStatus = 0; pSRB->SRBSGIndex = 0; if (trm_StartSCSI(pACB, pDCB, pSRB)) { /* * If trm_StartSCSI return 1 : * current interrupt status is interrupt * disreenable * It's said that SCSI processor has more * one SRB need to do */ trm_RewaitSRB(pDCB, pSRB); } return; } else { TRM_DPRINTF("trm: driver stuffup at %s %d\n", __FILE__, __LINE__); pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; } } } else { /* * process initiator status.......................... * Adapter (initiator) status */ status = pSRB->AdaptStatus; if (status & H_OVER_UNDER_RUN) { pSRB->TargetStatus = 0; pccb->ccb_h.status = CAM_DATA_RUN_ERR; /* Illegal length (over/under run) */ } else if (pSRB->SRBStatus & PARITY_ERROR) { TRM_DPRINTF("trm: driver stuffup %s %d\n", __FILE__, __LINE__); pDCB->tinfo.goal.period = 0; pDCB->tinfo.goal.offset = 0; /* Driver failed to perform operation */ pccb->ccb_h.status = CAM_UNCOR_PARITY; } else { /* no error */ pSRB->AdaptStatus = 0; pSRB->TargetStatus = 0; pccb->ccb_h.status = CAM_REQ_CMP; /* there is no error, (sense is invalid) */ } } ckc_e: if (pACB->scan_devices[target_id][target_lun]) { /* * if SCSI command in "scan devices" duty */ if (pSRB->CmdBlock[0] == TEST_UNIT_READY) pACB->scan_devices[target_id][target_lun] = 0; /* SCSI command phase :test unit ready */ else if (pSRB->CmdBlock[0] == INQUIRY) { /* * SCSI command phase :inquiry scsi device data * (type,capacity,manufacture.... */ if (pccb->ccb_h.status == CAM_SEL_TIMEOUT) goto NO_DEV; ptr = (PSCSI_INQDATA) pcsio->data_ptr; /* page fault */ TRM_DPRINTF("trm_SRBdone..PSCSI_INQDATA:%2x \n", ptr->DevType); bval1 = ptr->DevType & SCSI_DEVTYPE; if (bval1 == SCSI_NODEV) { NO_DEV: TRM_DPRINTF("trm_SRBdone NO Device:target_id= %d ,target_lun= %d \n", target_id, target_lun); intflag = splcam(); pACB->scan_devices[target_id][target_lun] = 0; /* no device set scan device flag =0*/ /* pDCB Q link */ /* move the head of DCB to tempDCB*/ pTempDCB=pACB->pLinkDCB; /* search current DCB for pass link */ while (pTempDCB->pNextDCB != pDCB) { pTempDCB = pTempDCB->pNextDCB; } /* * when the current DCB found than connect * current DCB tail */ /* to the DCB tail that before current DCB */ pTempDCB->pNextDCB = pDCB->pNextDCB; /* * if there was only one DCB ,connect his tail * to his head */ if (pACB->pLinkDCB == pDCB) pACB->pLinkDCB = pTempDCB->pNextDCB; if (pACB->pDCBRunRobin == pDCB) pACB->pDCBRunRobin = pTempDCB->pNextDCB; pDCB->DCBstatus &= ~DS_IN_QUEUE; pACB->DeviceCnt--; if (pACB->DeviceCnt == 0) { pACB->pLinkDCB = NULL; pACB->pDCBRunRobin = NULL; } splx(intflag); } else { #ifdef trm_DEBUG1 int j; for (j = 0; j < 28; j++) { TRM_DPRINTF("ptr=%2x ", ((u_int8_t *)ptr)[j]); } #endif pDCB->DevType = bval1; if (bval1 == SCSI_DASD || bval1 == SCSI_OPTICAL) { if ((((ptr->Vers & 0x07) >= 2) || ((ptr->RDF & 0x0F) == 2)) && (ptr->Flags & SCSI_INQ_CMDQUEUE) && (pDCB->DevMode & TAG_QUEUING_) && (pDCB->DevMode & EN_DISCONNECT_)) { if (pDCB->DevMode & TAG_QUEUING_) { pDCB-> MaxActiveCommandCnt = pACB->TagMaxNum; pDCB->SyncMode |= EN_TAG_QUEUING; pDCB->tinfo.disc_tag |= TRM_CUR_TAGENB; } else { pDCB->SyncMode |= EN_ATN_STOP; pDCB->tinfo.disc_tag &= ~TRM_CUR_TAGENB; } } } } /* pSRB->CmdBlock[0] == INQUIRY */ } /* pACB->scan_devices[target_id][target_lun] */ } intflag = splcam(); /* ReleaseSRB(pDCB, pSRB); */ if (pSRB == pDCB->pGoingSRB) pDCB->pGoingSRB = pSRB->pNextSRB; else { psrb = pDCB->pGoingSRB; while (psrb->pNextSRB != pSRB) { psrb = psrb->pNextSRB; } psrb->pNextSRB = pSRB->pNextSRB; if (pSRB == pDCB->pGoingLastSRB) { pDCB->pGoingLastSRB = psrb; } } pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; pDCB->GoingSRBCnt--; trm_DoWaitingSRB(pACB); splx(intflag); /* Notify cmd done */ xpt_done (pccb); } static void trm_DoingSRB_Done(PACB pACB) { PDCB pDCB, pdcb; PSRB psrb, psrb2; u_int16_t cnt, i; union ccb *pccb; pDCB = pACB->pLinkDCB; if (pDCB == NULL) return; pdcb = pDCB; do { cnt = pdcb->GoingSRBCnt; psrb = pdcb->pGoingSRB; for (i = 0; i < cnt; i++) { psrb2 = psrb->pNextSRB; pccb = psrb->pccb; pccb->ccb_h.status = CAM_SEL_TIMEOUT; /* ReleaseSRB(pDCB, pSRB); */ psrb->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = psrb; xpt_done(pccb); psrb = psrb2; } pdcb->GoingSRBCnt = 0; pdcb->pGoingSRB = NULL; pdcb = pdcb->pNextDCB; } while (pdcb != pDCB); } static void trm_ResetSCSIBus(PACB pACB) { int intflag; intflag = splcam(); pACB->ACBFlag |= RESET_DEV; trm_reg_write16(DO_RSTSCSI,TRMREG_SCSI_CONTROL); while (!(trm_reg_read16(TRMREG_SCSI_INTSTATUS) & INT_SCSIRESET)); splx(intflag); return; } static void trm_ScsiRstDetect(PACB pACB) { int intflag; u_long wlval; TRM_DPRINTF("trm_ScsiRstDetect \n"); wlval = 1000; while (--wlval) DELAY(1000); intflag = splcam(); trm_reg_write8(STOPDMAXFER,TRMREG_DMA_CONTROL); trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL); if (pACB->ACBFlag & RESET_DEV) pACB->ACBFlag |= RESET_DONE; else { pACB->ACBFlag |= RESET_DETECT; trm_ResetDevParam(pACB); /* trm_DoingSRB_Done(pACB); ???? */ trm_RecoverSRB(pACB); pACB->pActiveDCB = NULL; pACB->ACBFlag = 0; trm_DoWaitingSRB(pACB); } splx(intflag); return; } static void trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB) { union ccb *pccb; struct ccb_scsiio *pcsio; pccb = pSRB->pccb; pcsio = &pccb->csio; pSRB->SRBFlag |= AUTO_REQSENSE; pSRB->Segment0[0] = *((u_long *) &(pSRB->CmdBlock[0])); pSRB->Segment0[1] = *((u_long *) &(pSRB->CmdBlock[4])); pSRB->Segment1[0] = (u_long) ((pSRB->ScsiCmdLen << 8) + pSRB->SRBSGCount); pSRB->Segment1[1] = pSRB->SRBTotalXferLength; /* ?????????? */ /* $$$$$$ Status of initiator/target $$$$$$$$ */ pSRB->AdaptStatus = 0; pSRB->TargetStatus = 0; /* $$$$$$ Status of initiator/target $$$$$$$$ */ pSRB->SRBTotalXferLength = sizeof(pcsio->sense_data); pSRB->SgSenseTemp.address = pSRB->pSRBSGL->address; pSRB->SgSenseTemp.length = pSRB->pSRBSGL->length; pSRB->pSRBSGL->address = trm_get_sense_bufaddr(pACB, pSRB); pSRB->pSRBSGL->length = (u_long) sizeof(struct scsi_sense_data); pSRB->SRBSGCount = 1; pSRB->SRBSGIndex = 0; *((u_long *) &(pSRB->CmdBlock[0])) = 0x00000003; pSRB->CmdBlock[1] = pDCB->IdentifyMsg << 5; *((u_int16_t *) &(pSRB->CmdBlock[4])) = pcsio->sense_len; pSRB->ScsiCmdLen = 6; if (trm_StartSCSI(pACB, pDCB, pSRB)) /* * If trm_StartSCSI return 1 : * current interrupt status is interrupt disreenable * It's said that SCSI processor has more one SRB need to do */ trm_RewaitSRB(pDCB, pSRB); } static void trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB) { pSRB->MsgCnt = 1; trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL); } static void trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB) { pSRB->MsgOutBuf[0] = MSG_ABORT; trm_EnableMsgOutAbort2(pACB, pSRB); } static void trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit,u_int32_t i,u_int32_t j) { PNVRAMTYPE pEEpromBuf; u_int8_t bval,PeriodIndex; u_int target_id,target_lun; PDCB pTempDCB; int intflag; target_id = i; target_lun = j; /* * Using the lun 0 device to init other DCB first, if the device * has been initialized. * I don't want init sync arguments one by one, it is the same. */ if (target_lun != 0 && (pACB->DCBarray[target_id][0].DCBstatus & DS_IN_QUEUE)) bcopy(&pACB->DCBarray[target_id][0], pDCB, sizeof(TRM_DCB)); intflag = splcam(); if (pACB->pLinkDCB == 0) { pACB->pLinkDCB = pDCB; /* * RunRobin impersonate the role * that let each device had good proportion * about SCSI command proceeding */ pACB->pDCBRunRobin = pDCB; pDCB->pNextDCB = pDCB; } else { pTempDCB=pACB->pLinkDCB; /* search the last nod of DCB link */ while (pTempDCB->pNextDCB != pACB->pLinkDCB) pTempDCB = pTempDCB->pNextDCB; /* connect current DCB with last DCB tail */ pTempDCB->pNextDCB = pDCB; /* connect current DCB tail to this DCB Q head */ pDCB->pNextDCB=pACB->pLinkDCB; } splx(intflag); pACB->DeviceCnt++; pDCB->TargetID = target_id; pDCB->TargetLUN = target_lun; pDCB->pWaitingSRB = NULL; pDCB->pGoingSRB = NULL; pDCB->GoingSRBCnt = 0; pDCB->pActiveSRB = NULL; pDCB->MaxActiveCommandCnt = 1; pDCB->DCBFlag = 0; pDCB->DCBstatus |= DS_IN_QUEUE; /* $$$$$$$ */ pEEpromBuf = &trm_eepromBuf[unit]; pDCB->DevMode = pEEpromBuf->NvramTarget[target_id].NvmTarCfg0; pDCB->AdpMode = pEEpromBuf->NvramChannelCfg; /* $$$$$$$ */ /* * disconnect enable ? */ if (pDCB->DevMode & NTC_DO_DISCONNECT) { bval = 0xC0; pDCB->tinfo.disc_tag |= TRM_USR_DISCENB ; } else { bval = 0x80; pDCB->tinfo.disc_tag &= ~(TRM_USR_DISCENB); } bval |= target_lun; pDCB->IdentifyMsg = bval; if (target_lun != 0 && (pACB->DCBarray[target_id][0].DCBstatus & DS_IN_QUEUE)) return; /* $$$$$$$ */ /* * tag Qing enable ? */ if (pDCB->DevMode & TAG_QUEUING_) { pDCB->tinfo.disc_tag |= TRM_USR_TAGENB ; } else pDCB->tinfo.disc_tag &= ~(TRM_USR_TAGENB); /* $$$$$$$ */ /* * wide nego ,sync nego enable ? */ pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; PeriodIndex = pEEpromBuf->NvramTarget[target_id].NvmTarPeriod & 0x07; if (pACB->AdaptType==1) {/* is U2? */ pDCB->MaxNegoPeriod=dc395u2x_clock_period[ PeriodIndex ]; pDCB->tinfo.user.period=pDCB->MaxNegoPeriod; pDCB->tinfo.user.offset=(pDCB->SyncMode & SYNC_NEGO_ENABLE) ? 31 : 0; } else { pDCB->MaxNegoPeriod=dc395x_clock_period[ PeriodIndex ]; pDCB->tinfo.user.period=pDCB->MaxNegoPeriod; pDCB->tinfo.user.offset=(pDCB->SyncMode & SYNC_NEGO_ENABLE) ? 15 : 0; } pDCB->SyncMode = 0; if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) && (pACB->Config & HCC_WIDE_CARD)) pDCB->SyncMode |= WIDE_NEGO_ENABLE; /* enable wide nego */ if (pDCB->DevMode & NTC_DO_SYNC_NEGO) pDCB->SyncMode |= SYNC_NEGO_ENABLE; /* enable sync nego */ /* $$$$$$$ */ /* * Fill in tinfo structure. */ pDCB->tinfo.user.width = (pDCB->SyncMode & WIDE_NEGO_ENABLE) ? MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT; pDCB->tinfo.current.period = 0; pDCB->tinfo.current.offset = 0; pDCB->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT; } static void trm_srbmapSG(void *arg, bus_dma_segment_t *segs, int nseg, int error) { PSRB pSRB; pSRB=(PSRB) arg; pSRB->SRBSGPhyAddr=segs->ds_addr; return; } static void trm_destroySRB(PACB pACB) { PSRB pSRB; pSRB = pACB->pFreeSRB; while (pSRB) { if (pSRB->sg_dmamap) { bus_dmamap_unload(pACB->sg_dmat, pSRB->sg_dmamap); bus_dmamem_free(pACB->sg_dmat, pSRB->pSRBSGL, pSRB->sg_dmamap); bus_dmamap_destroy(pACB->sg_dmat, pSRB->sg_dmamap); } if (pSRB->dmamap) bus_dmamap_destroy(pACB->buffer_dmat, pSRB->dmamap); pSRB = pSRB->pNextSRB; } } static int trm_initSRB(PACB pACB) { u_int16_t i; PSRB pSRB; int error; for (i = 0; i < TRM_MAX_SRB_CNT; i++) { pSRB = (PSRB)&pACB->pFreeSRB[i]; if (bus_dmamem_alloc(pACB->sg_dmat, (void **)&pSRB->pSRBSGL, BUS_DMA_NOWAIT, &pSRB->sg_dmamap) !=0 ) { return ENXIO; } bus_dmamap_load(pACB->sg_dmat, pSRB->sg_dmamap, pSRB->pSRBSGL, TRM_MAX_SG_LISTENTRY * sizeof(SGentry), trm_srbmapSG, pSRB, /*flags*/0); if (i != TRM_MAX_SRB_CNT - 1) { /* * link all SRB */ pSRB->pNextSRB = &pACB->pFreeSRB[i+1]; } else { /* * load NULL to NextSRB of the last SRB */ pSRB->pNextSRB = NULL; } pSRB->TagNumber = i; /* * Create the dmamap. This is no longer optional! */ if ((error = bus_dmamap_create(pACB->buffer_dmat, 0, &pSRB->dmamap)) != 0) return (error); } return (0); } static void trm_initACB(PACB pACB, u_int8_t adaptType, u_int16_t unit) { PNVRAMTYPE pEEpromBuf; pEEpromBuf = &trm_eepromBuf[unit]; pACB->max_id = 15; if (pEEpromBuf->NvramChannelCfg & NAC_SCANLUN) pACB->max_lun = 7; else pACB->max_lun = 0; TRM_DPRINTF("trm: pACB->max_id= %d pACB->max_lun= %d \n", pACB->max_id, pACB->max_lun); pACB->pLinkDCB = NULL; pACB->pDCBRunRobin = NULL; pACB->pActiveDCB = NULL; pACB->AdapterUnit = (u_int8_t)unit; pACB->AdaptSCSIID = pEEpromBuf->NvramScsiId; pACB->AdaptSCSILUN = 0; pACB->DeviceCnt = 0; pACB->AdaptType = adaptType; pACB->TagMaxNum = 2 << pEEpromBuf->NvramMaxTag; pACB->ACBFlag = 0; return; } static void NVRAM_trm_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB) { u_int8_t *bpEeprom = (u_int8_t *) pEEpromBuf; u_int8_t bAddr; /* Enable SEEPROM */ trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM), TRMREG_GEN_CONTROL); /* * Write enable */ NVRAM_trm_write_cmd(pACB, 0x04, 0xFF); trm_reg_write8(0, TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++) { NVRAM_trm_set_data(pACB, bAddr, *bpEeprom); } /* * Write disable */ NVRAM_trm_write_cmd(pACB, 0x04, 0x00); trm_reg_write8(0 , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); /* Disable SEEPROM */ trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM), TRMREG_GEN_CONTROL); return; } static void NVRAM_trm_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData) { int i; u_int8_t bSendData; /* * Send write command & address */ NVRAM_trm_write_cmd(pACB, 0x05, bAddr); /* * Write data */ for (i = 0; i < 8; i++, bData <<= 1) { bSendData = NVR_SELECT; if (bData & 0x80) /* Start from bit 7 */ bSendData |= NVR_BITOUT; trm_reg_write8(bSendData , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); } trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); /* * Disable chip select */ trm_reg_write8(0 , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8(NVR_SELECT ,TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); /* * Wait for write ready */ while (1) { trm_reg_write8((NVR_SELECT | NVR_CLOCK), TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); if (trm_reg_read8(TRMREG_GEN_NVRAM) & NVR_BITIN) { break; } } /* * Disable chip select */ trm_reg_write8(0, TRMREG_GEN_NVRAM); return; } static void NVRAM_trm_read_all(PNVRAMTYPE pEEpromBuf, PACB pACB) { u_int8_t *bpEeprom = (u_int8_t*) pEEpromBuf; u_int8_t bAddr; /* * Enable SEEPROM */ trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM), TRMREG_GEN_CONTROL); for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++) *bpEeprom = NVRAM_trm_get_data(pACB, bAddr); /* * Disable SEEPROM */ trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM), TRMREG_GEN_CONTROL); return; } static u_int8_t NVRAM_trm_get_data(PACB pACB, u_int8_t bAddr) { int i; u_int8_t bReadData, bData = 0; /* * Send read command & address */ NVRAM_trm_write_cmd(pACB, 0x06, bAddr); for (i = 0; i < 8; i++) { /* * Read data */ trm_reg_write8((NVR_SELECT | NVR_CLOCK) , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM); /* * Get data bit while falling edge */ bReadData = trm_reg_read8(TRMREG_GEN_NVRAM); bData <<= 1; if (bReadData & NVR_BITIN) { bData |= 1; } NVRAM_trm_wait_30us(pACB); } /* * Disable chip select */ trm_reg_write8(0, TRMREG_GEN_NVRAM); return (bData); } static void NVRAM_trm_wait_30us(PACB pACB) { /* ScsiPortStallExecution(30); wait 30 us */ trm_reg_write8(5, TRMREG_GEN_TIMER); while (!(trm_reg_read8(TRMREG_GEN_STATUS) & GTIMEOUT)); return; } static void NVRAM_trm_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr) { int i; u_int8_t bSendData; for (i = 0; i < 3; i++, bCmd <<= 1) { /* * Program SB+OP code */ bSendData = NVR_SELECT; if (bCmd & 0x04) bSendData |= NVR_BITOUT; /* start from bit 2 */ trm_reg_write8(bSendData, TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); } for (i = 0; i < 7; i++, bAddr <<= 1) { /* * Program address */ bSendData = NVR_SELECT; if (bAddr & 0x40) /* Start from bit 6 */ bSendData |= NVR_BITOUT; trm_reg_write8(bSendData , TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); } trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM); NVRAM_trm_wait_30us(pACB); } static void trm_check_eeprom(PNVRAMTYPE pEEpromBuf, PACB pACB) { u_int16_t *wpEeprom = (u_int16_t *) pEEpromBuf; u_int16_t wAddr, wCheckSum; u_long dAddr, *dpEeprom; NVRAM_trm_read_all(pEEpromBuf,pACB); wCheckSum = 0; for (wAddr = 0, wpEeprom = (u_int16_t *) pEEpromBuf; wAddr < 64; wAddr++, wpEeprom++) { wCheckSum += *wpEeprom; } if (wCheckSum != 0x1234) { /* * Checksum error, load default */ pEEpromBuf->NvramSubVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM; pEEpromBuf->NvramSubVendorID[1] = (u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8); pEEpromBuf->NvramSubSysID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040; pEEpromBuf->NvramSubSysID[1] = (u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8); pEEpromBuf->NvramSubClass = 0x00; pEEpromBuf->NvramVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM; pEEpromBuf->NvramVendorID[1] = (u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8); pEEpromBuf->NvramDeviceID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040; pEEpromBuf->NvramDeviceID[1] = (u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8); pEEpromBuf->NvramReserved = 0x00; for (dAddr = 0, dpEeprom = (u_long *) pEEpromBuf->NvramTarget; dAddr < 16; dAddr++, dpEeprom++) { *dpEeprom = 0x00000077; /* NvmTarCfg3,NvmTarCfg2,NvmTarPeriod,NvmTarCfg0 */ } *dpEeprom++ = 0x04000F07; /* NvramMaxTag,NvramDelayTime,NvramChannelCfg,NvramScsiId */ *dpEeprom++ = 0x00000015; /* NvramReserved1,NvramBootLun,NvramBootTarget,NvramReserved0 */ for (dAddr = 0; dAddr < 12; dAddr++, dpEeprom++) *dpEeprom = 0x00; pEEpromBuf->NvramCheckSum = 0x00; for (wAddr = 0, wCheckSum = 0, wpEeprom = (u_int16_t *) pEEpromBuf; wAddr < 63; wAddr++, wpEeprom++) wCheckSum += *wpEeprom; *wpEeprom = 0x1234 - wCheckSum; NVRAM_trm_write_all(pEEpromBuf,pACB); } return; } static int trm_initAdapter(PACB pACB, u_int16_t unit) { PNVRAMTYPE pEEpromBuf; u_int16_t wval; u_int8_t bval; pEEpromBuf = &trm_eepromBuf[unit]; /* 250ms selection timeout */ trm_reg_write8(SEL_TIMEOUT, TRMREG_SCSI_TIMEOUT); /* Mask all the interrupt */ trm_reg_write8(0x00, TRMREG_DMA_INTEN); trm_reg_write8(0x00, TRMREG_SCSI_INTEN); /* Reset SCSI module */ trm_reg_write16(DO_RSTMODULE, TRMREG_SCSI_CONTROL); /* program configuration 0 */ pACB->Config = HCC_AUTOTERM | HCC_PARITY; if (trm_reg_read8(TRMREG_GEN_STATUS) & WIDESCSI) pACB->Config |= HCC_WIDE_CARD; if (pEEpromBuf->NvramChannelCfg & NAC_POWERON_SCSI_RESET) pACB->Config |= HCC_SCSI_RESET; if (pACB->Config & HCC_PARITY) bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK; else bval = PHASELATCH | INITIATOR | BLOCKRST ; trm_reg_write8(bval,TRMREG_SCSI_CONFIG0); /* program configuration 1 */ trm_reg_write8(0x13, TRMREG_SCSI_CONFIG1); /* program Host ID */ bval = pEEpromBuf->NvramScsiId; trm_reg_write8(bval, TRMREG_SCSI_HOSTID); /* set ansynchronous transfer */ trm_reg_write8(0x00, TRMREG_SCSI_OFFSET); /* Trun LED control off*/ wval = trm_reg_read16(TRMREG_GEN_CONTROL) & 0x7F; trm_reg_write16(wval, TRMREG_GEN_CONTROL); /* DMA config */ wval = trm_reg_read16(TRMREG_DMA_CONFIG) | DMA_ENHANCE; trm_reg_write16(wval, TRMREG_DMA_CONFIG); /* Clear pending interrupt status */ trm_reg_read8(TRMREG_SCSI_INTSTATUS); /* Enable SCSI interrupt */ trm_reg_write8(0x7F, TRMREG_SCSI_INTEN); trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN); return (0); } static void trm_mapSRB(void *arg, bus_dma_segment_t *segs, int nseg, int error) { PACB pACB; pACB = (PACB)arg; pACB->srb_physbase = segs->ds_addr; } static void trm_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) { bus_addr_t *baddr; baddr = (bus_addr_t *)arg; *baddr = segs->ds_addr; } static PACB trm_init(u_int16_t unit, device_t dev) { PACB pACB; int rid = PCIR_BAR(0), i = 0, j = 0; u_int16_t adaptType = 0; pACB = (PACB) device_get_softc(dev); if (!pACB) { printf("trm%d: cannot allocate ACB !\n", unit); return (NULL); } pACB->iores = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE); if (pACB->iores == NULL) { printf("trm_init: bus_alloc_resource failed!\n"); return (NULL); } switch (pci_get_devid(dev)) { case PCI_DEVICEID_TRMS1040: adaptType = 0; break; case PCI_DEVICEID_TRMS2080: adaptType = 1; break; default: printf("trm_init %d: unknown adapter type!\n", unit); goto bad; } pACB->dev = dev; pACB->tag = rman_get_bustag(pACB->iores); pACB->bsh = rman_get_bushandle(pACB->iores); if (bus_dma_tag_create( /*parent_dmat*/ bus_get_dma_tag(dev), /*alignment*/ 1, /*boundary*/ 0, /*lowaddr*/ BUS_SPACE_MAXADDR, /*highaddr*/ BUS_SPACE_MAXADDR, /*filter*/ NULL, /*filterarg*/ NULL, /*maxsize*/ BUS_SPACE_MAXSIZE_32BIT, /*nsegments*/ BUS_SPACE_UNRESTRICTED, /*maxsegsz*/ BUS_SPACE_MAXSIZE_32BIT, /*flags*/ 0, /*lockfunc*/ NULL, /*lockarg*/ NULL, /* dmat */ &pACB->parent_dmat) != 0) goto bad; if (bus_dma_tag_create( /*parent_dmat*/ pACB->parent_dmat, /*alignment*/ 1, /*boundary*/ 0, /*lowaddr*/ BUS_SPACE_MAXADDR, /*highaddr*/ BUS_SPACE_MAXADDR, /*filter*/ NULL, /*filterarg*/ NULL, /*maxsize*/ MAXBSIZE, /*nsegments*/ TRM_NSEG, /*maxsegsz*/ TRM_MAXTRANSFER_SIZE, /*flags*/ BUS_DMA_ALLOCNOW, /*lockfunc*/ busdma_lock_mutex, /*lockarg*/ &Giant, /* dmat */ &pACB->buffer_dmat) != 0) goto bad; /* DMA tag for our ccb structures */ if (bus_dma_tag_create( /*parent_dmat*/pACB->parent_dmat, /*alignment*/ 1, /*boundary*/ 0, /*lowaddr*/ BUS_SPACE_MAXADDR, /*highaddr*/ BUS_SPACE_MAXADDR, /*filter*/ NULL, /*filterarg*/ NULL, /*maxsize*/ TRM_MAX_SRB_CNT * sizeof(TRM_SRB), /*nsegments*/ 1, /*maxsegsz*/ TRM_MAXTRANSFER_SIZE, /*flags*/ 0, /*lockfunc*/ busdma_lock_mutex, /*lockarg*/ &Giant, /*dmat*/ &pACB->srb_dmat) != 0) { printf("trm_init %d: bus_dma_tag_create SRB failure\n", unit); goto bad; } if (bus_dmamem_alloc(pACB->srb_dmat, (void **)&pACB->pFreeSRB, BUS_DMA_NOWAIT, &pACB->srb_dmamap) != 0) { printf("trm_init %d: bus_dmamem_alloc SRB failure\n", unit); goto bad; } bus_dmamap_load(pACB->srb_dmat, pACB->srb_dmamap, pACB->pFreeSRB, TRM_MAX_SRB_CNT * sizeof(TRM_SRB), trm_mapSRB, pACB, /* flags */0); /* Create, allocate, and map DMA buffers for autosense data */ if (bus_dma_tag_create( /*parent_dmat*/pACB->parent_dmat, /*alignment*/1, /*boundary*/0, /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, /*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, sizeof(struct scsi_sense_data) * TRM_MAX_SRB_CNT, /*nsegments*/1, /*maxsegsz*/TRM_MAXTRANSFER_SIZE, /*flags*/0, /*lockfunc*/busdma_lock_mutex, /*lockarg*/&Giant, &pACB->sense_dmat) != 0) { if (bootverbose) device_printf(dev, "cannot create sense buffer dmat\n"); goto bad; } if (bus_dmamem_alloc(pACB->sense_dmat, (void **)&pACB->sense_buffers, BUS_DMA_NOWAIT, &pACB->sense_dmamap) != 0) goto bad; bus_dmamap_load(pACB->sense_dmat, pACB->sense_dmamap, pACB->sense_buffers, sizeof(struct scsi_sense_data) * TRM_MAX_SRB_CNT, trm_dmamap_cb, &pACB->sense_busaddr, /*flags*/0); trm_check_eeprom(&trm_eepromBuf[unit],pACB); trm_initACB(pACB, adaptType, unit); for (i = 0; i < (pACB->max_id + 1); i++) { if (pACB->AdaptSCSIID == i) continue; for(j = 0; j < (pACB->max_lun + 1); j++) { pACB->scan_devices[i][j] = 1; /* we assume we need to scan all devices */ trm_initDCB(pACB, &pACB->DCBarray[i][j], unit, i, j); } } bzero(pACB->pFreeSRB, TRM_MAX_SRB_CNT * sizeof(TRM_SRB)); if (bus_dma_tag_create( /*parent_dmat*/pACB->parent_dmat, /*alignment*/ 1, /*boundary*/ 0, /*lowaddr*/ BUS_SPACE_MAXADDR, /*highaddr*/ BUS_SPACE_MAXADDR, /*filter*/ NULL, /*filterarg*/ NULL, /*maxsize*/ TRM_MAX_SG_LISTENTRY * sizeof(SGentry), /*nsegments*/ 1, /*maxsegsz*/ TRM_MAXTRANSFER_SIZE, /*flags*/ 0, /*lockfunc*/ busdma_lock_mutex, /*lockarg*/ &Giant, /*dmat*/ &pACB->sg_dmat) != 0) goto bad; if (trm_initSRB(pACB)) { printf("trm_initSRB: error\n"); goto bad; } if (trm_initAdapter(pACB, unit)) { printf("trm_initAdapter: initial ERROR\n"); goto bad; } return (pACB); bad: if (pACB->iores) bus_release_resource(dev, SYS_RES_IOPORT, PCIR_BAR(0), pACB->iores); if (pACB->sense_dmamap) { bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap); bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers, pACB->sense_dmamap); bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap); } if (pACB->sense_dmat) bus_dma_tag_destroy(pACB->sense_dmat); if (pACB->sg_dmat) { trm_destroySRB(pACB); bus_dma_tag_destroy(pACB->sg_dmat); } if (pACB->srb_dmamap) { bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap); bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB, pACB->srb_dmamap); bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap); } if (pACB->srb_dmat) bus_dma_tag_destroy(pACB->srb_dmat); if (pACB->buffer_dmat) bus_dma_tag_destroy(pACB->buffer_dmat); if (pACB->parent_dmat) bus_dma_tag_destroy(pACB->parent_dmat); return (NULL); } static int trm_attach(device_t dev) { struct cam_devq *device_Q; u_long device_id; PACB pACB = 0; int rid = 0; int unit = device_get_unit(dev); device_id = pci_get_devid(dev); /* * These cards do not allow memory mapped accesses */ if ((pACB = trm_init((u_int16_t) unit, dev)) == NULL) { printf("trm%d: trm_init error!\n",unit); return (ENXIO); } /* After setting up the adapter, map our interrupt */ /* * Now let the CAM generic SCSI layer find the SCSI devices on the bus * start queue to reset to the idle loop. * Create device queue of SIM(s) * (MAX_START_JOB - 1) : max_sim_transactions */ pACB->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (pACB->irq == NULL || bus_setup_intr(dev, pACB->irq, INTR_TYPE_CAM, NULL, trm_Interrupt, pACB, &pACB->ih)) { printf("trm%d: register Interrupt handler error!\n", unit); goto bad; } device_Q = cam_simq_alloc(TRM_MAX_START_JOB); if (device_Q == NULL){ printf("trm%d: device_Q == NULL !\n",unit); goto bad; } /* * Now tell the generic SCSI layer * about our bus. * If this is the xpt layer creating a sim, then it's OK * to wait for an allocation. * XXX Should we pass in a flag to indicate that wait is OK? * * SIM allocation * * SCSI Interface Modules * The sim driver creates a sim for each controller. The sim device * queue is separately created in order to allow resource sharing betwee * sims. For instance, a driver may create one sim for each channel of * a multi-channel controller and use the same queue for each channel. * In this way, the queue resources are shared across all the channels * of the multi-channel controller. * trm_action : sim_action_func * trm_poll : sim_poll_func * "trm" : sim_name ,if sim_name = "xpt" ..M_DEVBUF,M_WAITOK * pACB : *softc if sim_name <> "xpt" ..M_DEVBUF,M_NOWAIT * pACB->unit : unit * 1 : max_dev_transactions * MAX_TAGS : max_tagged_dev_transactions * * *******Construct our first channel SIM entry */ pACB->psim = cam_sim_alloc(trm_action, trm_poll, "trm", pACB, unit, &Giant, 1, TRM_MAX_TAGS_CMD_QUEUE, device_Q); if (pACB->psim == NULL) { printf("trm%d: SIM allocate fault !\n",unit); cam_simq_free(device_Q); /* SIM allocate fault*/ goto bad; } if (xpt_bus_register(pACB->psim, dev, 0) != CAM_SUCCESS) { printf("trm%d: xpt_bus_register fault !\n",unit); goto bad; } if (xpt_create_path(&pACB->ppath, NULL, cam_sim_path(pACB->psim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { printf("trm%d: xpt_create_path fault !\n",unit); xpt_bus_deregister(cam_sim_path(pACB->psim)); goto bad; } return (0); bad: if (pACB->iores) bus_release_resource(dev, SYS_RES_IOPORT, PCIR_BAR(0), pACB->iores); if (pACB->sg_dmat) { trm_destroySRB(pACB); bus_dma_tag_destroy(pACB->sg_dmat); } if (pACB->srb_dmamap) { bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap); bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB, pACB->srb_dmamap); bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap); } if (pACB->srb_dmat) bus_dma_tag_destroy(pACB->srb_dmat); if (pACB->sense_dmamap) { bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap); bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers, pACB->sense_dmamap); bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap); } if (pACB->sense_dmat) bus_dma_tag_destroy(pACB->sense_dmat); if (pACB->buffer_dmat) bus_dma_tag_destroy(pACB->buffer_dmat); if (pACB->ih) bus_teardown_intr(dev, pACB->irq, pACB->ih); if (pACB->irq) bus_release_resource(dev, SYS_RES_IRQ, 0, pACB->irq); if (pACB->psim) cam_sim_free(pACB->psim, TRUE); return (ENXIO); } /* * pci_device * trm_probe (device_t tag, pcidi_t type) * */ static int trm_probe(device_t dev) { switch (pci_get_devid(dev)) { case PCI_DEVICEID_TRMS1040: device_set_desc(dev, "Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter"); return (BUS_PROBE_DEFAULT); case PCI_DEVICEID_TRMS2080: device_set_desc(dev, "Tekram DC395U2D/U2W Fast40 Wide SCSI Adapter"); return (BUS_PROBE_DEFAULT); default: return (ENXIO); } } static int trm_detach(device_t dev) { PACB pACB = device_get_softc(dev); bus_release_resource(dev, SYS_RES_IOPORT, PCIR_BAR(0), pACB->iores); trm_destroySRB(pACB); bus_dma_tag_destroy(pACB->sg_dmat); bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap); bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB, pACB->srb_dmamap); bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap); bus_dma_tag_destroy(pACB->srb_dmat); bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap); bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers, pACB->sense_dmamap); bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap); bus_dma_tag_destroy(pACB->sense_dmat); bus_dma_tag_destroy(pACB->buffer_dmat); bus_teardown_intr(dev, pACB->irq, pACB->ih); bus_release_resource(dev, SYS_RES_IRQ, 0, pACB->irq); xpt_async(AC_LOST_DEVICE, pACB->ppath, NULL); xpt_free_path(pACB->ppath); xpt_bus_deregister(cam_sim_path(pACB->psim)); cam_sim_free(pACB->psim, TRUE); return (0); } static device_method_t trm_methods[] = { /* Device interface */ DEVMETHOD(device_probe, trm_probe), DEVMETHOD(device_attach, trm_attach), DEVMETHOD(device_detach, trm_detach), { 0, 0 } }; static driver_t trm_driver = { "trm", trm_methods, sizeof(struct _ACB) }; static devclass_t trm_devclass; DRIVER_MODULE(trm, pci, trm_driver, trm_devclass, 0, 0); MODULE_DEPEND(trm, pci, 1, 1, 1); MODULE_DEPEND(trm, cam, 1, 1, 1);