| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/dtrace/dtnfsclient/@/dev/ic/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/dtrace/dtnfsclient/@/dev/ic/cd1400.h |
/*- * cyclades cyclom-y serial driver * Andrew Herbert <andrew@werple.apana.org.au>, 17 August 1993 * * Copyright (c) 1993 Andrew Herbert. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name Andrew Herbert may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/dev/ic/cd1400.h 50477 1999-08-28 01:08:13Z peter $ */ /* * Definitions for Cirrus Logic CD1400 serial/parallel chips. */ #define CD1400_NO_OF_CHANNELS 4 /* 4 serial channels per chip */ #define CD1400_RX_FIFO_SIZE 12 #define CD1400_TX_FIFO_SIZE 12 /* * Global registers. */ #define CD1400_GFRCR 0x40 /* global firmware revision code */ #define CD1400_CAR 0x68 /* channel access */ #define CD1400_CAR_CHAN (3<<0) /* channel select */ #define CD1400_GCR 0x4B /* global configuration */ #define CD1400_GCR_PARALLEL (1<<7) /* channel 0 is parallel */ #define CD1400_SVRR 0x67 /* service request */ #define CD1400_SVRR_MDMCH (1<<2) #define CD1400_SVRR_TXRDY (1<<1) #define CD1400_SVRR_RXRDY (1<<0) #define CD1400_RICR 0x44 /* receive interrupting channel */ #define CD1400_TICR 0x45 /* transmit interrupting channel */ #define CD1400_MICR 0x46 /* modem interrupting channel */ #define CD1400_RIR 0x6B /* receive interrupt status */ #define CD1400_RIR_RDIREQ (1<<7) /* rx service required */ #define CD1400_RIR_RBUSY (1<<6) /* rx service in progress */ #define CD1400_RIR_CHAN (3<<0) /* channel select */ #define CD1400_TIR 0x6A /* transmit interrupt status */ #define CD1400_TIR_RDIREQ (1<<7) /* tx service required */ #define CD1400_TIR_RBUSY (1<<6) /* tx service in progress */ #define CD1400_TIR_CHAN (3<<0) /* channel select */ #define CD1400_MIR 0x69 /* modem interrupt status */ #define CD1400_MIR_RDIREQ (1<<7) /* modem service required */ #define CD1400_MIR_RBUSY (1<<6) /* modem service in progress */ #define CD1400_MIR_CHAN (3<<0) /* channel select */ #define CD1400_PPR 0x7E /* prescaler period */ #define CD1400_PPR_PRESCALER 512 /* * Virtual registers. */ #define CD1400_RIVR 0x43 /* receive interrupt vector */ #define CD1400_RIVR_EXCEPTION (1<<2) /* receive exception bit */ #define CD1400_TIVR 0x42 /* transmit interrupt vector */ #define CD1400_MIVR 0x41 /* modem interrupt vector */ #define CD1400_TDR 0x63 /* transmit data */ #define CD1400_RDSR 0x62 /* receive data/status */ #define CD1400_RDSR_TIMEOUT (1<<7) /* rx timeout */ #define CD1400_RDSR_SPECIAL_SHIFT 4 /* rx special char shift */ #define CD1400_RDSR_SPECIAL (7<<4) /* rx special char */ #define CD1400_RDSR_BREAK (1<<3) /* rx break */ #define CD1400_RDSR_PE (1<<2) /* rx parity error */ #define CD1400_RDSR_FE (1<<1) /* rx framing error */ #define CD1400_RDSR_OE (1<<0) /* rx overrun error */ #define CD1400_MISR 0x4C /* modem interrupt status */ #define CD1400_MISR_DSRd (1<<7) /* DSR delta */ #define CD1400_MISR_CTSd (1<<6) /* CTS delta */ #define CD1400_MISR_RId (1<<5) /* RI delta */ #define CD1400_MISR_CDd (1<<4) /* CD delta */ #define CD1400_EOSRR 0x60 /* end of service request */ /* * Channel registers. */ #define CD1400_LIVR 0x18 /* local interrupt vector */ #define CD1400_CCR 0x05 /* channel control */ #define CD1400_CCR_CMDRESET (1<<7) /* enables following: */ #define CD1400_CCR_FTF (1<<1) /* flush tx fifo */ #define CD1400_CCR_FULLRESET (1<<0) /* full reset */ #define CD1400_CCR_CHANRESET 0 /* current channel */ #define CD1400_CCR_CMDCORCHG (1<<6) /* enables following: */ #define CD1400_CCR_COR3 (1<<3) /* COR3 changed */ #define CD1400_CCR_COR2 (1<<2) /* COR2 changed */ #define CD1400_CCR_COR1 (1<<1) /* COR1 changed */ #define CD1400_CCR_CMDSENDSC (1<<5) /* enables following: */ #define CD1400_CCR_SC (7<<0) /* special char 1-4 */ #define CD1400_CCR_CMDCHANCTL (1<<4) /* enables following: */ #define CD1400_CCR_XMTEN (1<<3) /* tx enable */ #define CD1400_CCR_XMTDIS (1<<2) /* tx disable */ #define CD1400_CCR_RCVEN (1<<1) /* rx enable */ #define CD1400_CCR_RCVDIS (1<<0) /* rx disable */ #define CD1400_SRER 0x06 /* service request enable */ #define CD1400_SRER_MDMCH (1<<7) /* modem change */ #define CD1400_SRER_RXDATA (1<<4) /* rx data */ #define CD1400_SRER_TXRDY (1<<2) /* tx fifo empty */ #define CD1400_SRER_TXMPTY (1<<1) /* tx shift reg empty */ #define CD1400_SRER_NNDT (1<<0) /* no new data */ #define CD1400_COR1 0x08 /* channel option 1 */ #define CD1400_COR1_PARODD (1<<7) #define CD1400_COR1_PARNORMAL (2<<5) #define CD1400_COR1_PARFORCE (1<<5) /* odd/even = force 1/0 */ #define CD1400_COR1_PARNONE (0<<5) #define CD1400_COR1_NOINPCK (1<<4) #define CD1400_COR1_STOP2 (2<<2) #define CD1400_COR1_STOP15 (1<<2) /* 1.5 stop bits */ #define CD1400_COR1_STOP1 (0<<2) #define CD1400_COR1_CS8 (3<<0) #define CD1400_COR1_CS7 (2<<0) #define CD1400_COR1_CS6 (1<<0) #define CD1400_COR1_CS5 (0<<0) #define CD1400_COR2 0x09 /* channel option 2 */ #define CD1400_COR2_IXANY (1<<7) /* implied XON mode */ #define CD1400_COR2_IXOFF (1<<6) /* in-band tx flow control */ #define CD1400_COR2_ETC (1<<5) /* embedded tx command */ #define CD1400_ETC_CMD 0x00 /* start an ETC */ #define CD1400_ETC_SENDBREAK 0x81 #define CD1400_ETC_INSERTDELAY 0x82 #define CD1400_ETC_STOPBREAK 0x83 #define CD1400_COR2_LLM (1<<4) /* local loopback mode */ #define CD1400_COR2_RLM (1<<3) /* remote loopback mode */ #define CD1400_COR2_RTSAO (1<<2) /* RTS auto output */ #define CD1400_COR2_CCTS_OFLOW (1<<1) /* CTS auto enable */ #define CD1400_COR2_CDSR_OFLOW (1<<0) /* DSR auto enable */ #define CD1400_COR3 0x0A /* channel option 3 */ #define CD1400_COR3_SCDRNG (1<<7) /* special char detect range */ #define CD1400_COR3_SCD34 (1<<6) /* special char detect 3-4 */ #define CD1400_COR3_FTC (1<<5) /* flow control transparency */ #define CD1400_COR3_SCD12 (1<<4) /* special char detect 1-2 */ #define CD1400_COR3_RXTH (15<<0) /* rx fifo threshold */ #define CD1400_COR4 0x1E /* channel option 4 */ #define CD1400_COR4_IGNCR (1<<7) #define CD1400_COR4_ICRNL (1<<6) #define CD1400_COR4_INLCR (1<<5) #define CD1400_COR4_IGNBRK (1<<4) #define CD1400_COR4_NOBRKINT (1<<3) #define CD1400_COR4_PFO_ESC (4<<0) /* parity/framing/overrun... */ #define CD1400_COR4_PFO_NUL (3<<0) #define CD1400_COR4_PFO_DISCARD (2<<0) #define CD1400_COR4_PFO_GOOD (1<<0) #define CD1400_COR4_PFO_EXCEPTION (0<<0) #define CD1400_COR5 0x1F /* channel option 5 */ #define CD1400_COR5_ISTRIP (1<<7) #define CD1400_COR5_LNEXT (1<<6) #define CD1400_COR5_CMOE (1<<5) /* char matching on error */ #define CD1400_COR5_EBD (1<<2) /* end of break detected */ #define CD1400_COR5_ONLCR (1<<1) #define CD1400_COR5_OCRNL (1<<0) #define CD1400_CCSR 0x0B /* channel control status */ #define CD1400_RDCR 0x0E /* received data count */ #define CD1400_SCHR1 0x1A /* special character 1 */ #define CD1400_SCHR2 0x1B /* special character 2 */ #define CD1400_SCHR3 0x1C /* special character 3 */ #define CD1400_SCHR4 0x1D /* special character 4 */ #define CD1400_SCRL 0x22 /* special character range, low */ #define CD1400_SCRH 0x23 /* special character range, high */ #define CD1400_LNC 0x24 /* lnext character */ #define CD1400_MCOR1 0x15 /* modem change option 1 */ #define CD1400_MCOR1_DSRzd (1<<7) /* DSR one-to-zero delta */ #define CD1400_MCOR1_CTSzd (1<<6) #define CD1400_MCOR1_RIzd (1<<5) #define CD1400_MCOR1_CDzd (1<<4) #define CD1400_MCOR1_DTRth (15<<0) /* dtrflow threshold */ #define CD1400_MCOR2 0x16 /* modem change option 2 */ #define CD1400_MCOR2_DSRod (1<<7) /* DSR zero-to-one delta */ #define CD1400_MCOR2_CTSod (1<<6) #define CD1400_MCOR2_RIod (1<<5) #define CD1400_MCOR2_CDod (1<<4) #define CD1400_RTPR 0x21 /* receive timeout period */ #define CD1400_MSVR1 0x6C /* modem signal value 1 */ #define CD1400_MSVR1_RTS (1<<0) /* RTS line (r/w) */ #define CD1400_MSVR2 0x6D /* modem signal value 2 */ #define CD1400_MSVR2_DSR (1<<7) /* !DSR line (r) */ #define CD1400_MSVR2_CTS (1<<6) /* !CTS line (r) */ #define CD1400_MSVR2_RI (1<<5) /* !RI line (r) */ #define CD1400_MSVR2_CD (1<<4) /* !CD line (r) */ #define CD1400_MSVR2_DTR (1<<1) /* DTR line (r/w) */ #define CD1400_PSVR 0x6F /* printer signal value */ #define CD1400_RBPR 0x78 /* receive baud rate period */ #define CD1400_RCOR 0x7C /* receive clock option */ #define CD1400_TBPR 0x72 /* transmit baud rate period */ #define CD1400_TCOR 0x76 /* transmit clock option */