| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/dtrace/sdt/@/dev/advansys/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/dtrace/sdt/@/dev/advansys/adwlib.h |
/*-
* Definitions for low level routines and data structures
* for the Advanced Systems Inc. SCSI controllers chips.
*
* Copyright (c) 1998, 1999, 2000 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/advansys/adwlib.h 141854 2005-02-14 01:10:50Z obrien $
*/
/*-
* Ported from:
* advansys.c - Linux Host Driver for AdvanSys SCSI Adapters
*
* Copyright (c) 1995-1998 Advanced System Products, Inc.
* All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that redistributions of source
* code retain the above copyright notice and this comment without
* modification.
*/
#ifndef _ADWLIB_H_
#define _ADWLIB_H_
#include "opt_adw.h"
#include <dev/advansys/adwmcode.h>
#define ADW_DEF_MAX_HOST_QNG 253
#define ADW_DEF_MIN_HOST_QNG 16
#define ADW_DEF_MAX_DVC_QNG 63
#define ADW_DEF_MIN_DVC_QNG 4
#define ADW_MAX_TID 15
#define ADW_MAX_LUN 7
#define ADW_ALL_TARGETS 0xFFFF
#define ADW_TARGET_GROUP(tid) ((tid) & ~0x3)
#define ADW_TARGET_GROUP_SHIFT(tid) (((tid) & 0x3) * 4)
#define ADW_TARGET_GROUP_MASK(tid) (0xF << ADW_TARGET_GROUP_SHIFT(tid))
/*
* Board Register offsets.
*/
#define ADW_INTR_STATUS_REG 0x0000
#define ADW_INTR_STATUS_INTRA 0x01
#define ADW_INTR_STATUS_INTRB 0x02
#define ADW_INTR_STATUS_INTRC 0x04
#define ADW_INTR_STATUS_INTRALL 0x07
#define ADW_SIGNATURE_WORD 0x0000
#define ADW_CHIP_ID_WORD 0x04C1
#define ADW_SIGNATURE_BYTE 0x0001
#define ADW_CHIP_ID_BYTE 0x25
#define ADW_INTR_ENABLES 0x0002 /*8 bit */
#define ADW_INTR_ENABLE_HOST_INTR 0x01
#define ADW_INTR_ENABLE_SEL_INTR 0x02
#define ADW_INTR_ENABLE_DPR_INTR 0x04
#define ADW_INTR_ENABLE_RTA_INTR 0x08
#define ADW_INTR_ENABLE_RMA_INTR 0x10
#define ADW_INTR_ENABLE_RST_INTR 0x20
#define ADW_INTR_ENABLE_DPE_INTR 0x40
#define ADW_INTR_ENABLE_GLOBAL_INTR 0x80
#define ADW_CTRL_REG 0x0002 /*16 bit*/
#define ADW_CTRL_REG_HOST_INTR 0x0100
#define ADW_CTRL_REG_SEL_INTR 0x0200
#define ADW_CTRL_REG_DPR_INTR 0x0400
#define ADW_CTRL_REG_RTA_INTR 0x0800
#define ADW_CTRL_REG_RMA_INTR 0x1000
#define ADW_CTRL_REG_RES_BIT14 0x2000
#define ADW_CTRL_REG_DPE_INTR 0x4000
#define ADW_CTRL_REG_POWER_DONE 0x8000
#define ADW_CTRL_REG_ANY_INTR 0xFF00
#define ADW_CTRL_REG_CMD_RESET 0x00C6
#define ADW_CTRL_REG_CMD_WR_IO_REG 0x00C5
#define ADW_CTRL_REG_CMD_RD_IO_REG 0x00C4
#define ADW_CTRL_REG_CMD_WR_PCI_CFG 0x00C3
#define ADW_CTRL_REG_CMD_RD_PCI_CFG 0x00C2
#define ADW_RAM_ADDR 0x0004
#define ADW_RAM_DATA 0x0006
#define ADW_RISC_CSR 0x000A
#define ADW_RISC_CSR_STOP 0x0000
#define ADW_RISC_TEST_COND 0x2000
#define ADW_RISC_CSR_RUN 0x4000
#define ADW_RISC_CSR_SINGLE_STEP 0x8000
#define ADW_SCSI_CFG0 0x000C
#define ADW_SCSI_CFG0_TIMER_MODEAB 0xC000 /*
* Watchdog, Second,
* and Selto timer CFG
*/
#define ADW_SCSI_CFG0_PARITY_EN 0x2000
#define ADW_SCSI_CFG0_EVEN_PARITY 0x1000
#define ADW_SCSI_CFG0_WD_LONG 0x0800 /*
* Watchdog Interval,
* 1: 57 min, 0: 13 sec
*/
#define ADW_SCSI_CFG0_QUEUE_128 0x0400 /*
* Queue Size,
* 1: 128 byte,
* 0: 64 byte
*/
#define ADW_SCSI_CFG0_PRIM_MODE 0x0100
#define ADW_SCSI_CFG0_SCAM_EN 0x0080
#define ADW_SCSI_CFG0_SEL_TMO_LONG 0x0040 /*
* Sel/Resel Timeout,
* 1: 400 ms,
* 0: 1.6 ms
*/
#define ADW_SCSI_CFG0_CFRM_ID 0x0020 /* SCAM id sel. */
#define ADW_SCSI_CFG0_OUR_ID_EN 0x0010
#define ADW_SCSI_CFG0_OUR_ID 0x000F
#define ADW_SCSI_CFG1 0x000E
#define ADW_SCSI_CFG1_BIG_ENDIAN 0x8000
#define ADW_SCSI_CFG1_TERM_POL 0x2000
#define ADW_SCSI_CFG1_SLEW_RATE 0x1000
#define ADW_SCSI_CFG1_FILTER_MASK 0x0C00
#define ADW_SCSI_CFG1_FLTR_DISABLE 0x0000
#define ADW_SCSI_CFG1_FLTR_11_TO_20NS 0x0800
#define ADW_SCSI_CFG1_FLTR_21_TO_39NS 0x0C00
#define ADW_SCSI_CFG1_DIS_ACTIVE_NEG 0x0200
#define ADW_SCSI_CFG1_DIFF_MODE 0x0100
#define ADW_SCSI_CFG1_DIFF_SENSE 0x0080
#define ADW_SCSI_CFG1_TERM_CTL_MANUAL 0x0040 /* Global Term Switch */
#define ADW_SCSI_CFG1_TERM_CTL_MASK 0x0030
#define ADW_SCSI_CFG1_TERM_CTL_H 0x0020 /* Enable SCSI-H */
#define ADW_SCSI_CFG1_TERM_CTL_L 0x0010 /* Enable SCSI-L */
#define ADW_SCSI_CFG1_CABLE_DETECT 0x000F
#define ADW_SCSI_CFG1_EXT16_MASK 0x0008 /* Ext16 cable pres */
#define ADW_SCSI_CFG1_EXT8_MASK 0x0004 /* Ext8 cable pres */
#define ADW_SCSI_CFG1_INT8_MASK 0x0002 /* Int8 cable pres */
#define ADW_SCSI_CFG1_INT16_MASK 0x0001 /* Int16 cable pres */
#define ADW_SCSI_CFG1_ILLEGAL_CABLE_CONF_A_MASK \
(ADW_SCSI_CFG1_EXT16_MASK|ADW_SCSI_CFG1_INT8_MASK|ADW_SCSI_CFG1_INT16_MASK)
#define ADW_SCSI_CFG1_ILLEGAL_CABLE_CONF_B_MASK \
(ADW_SCSI_CFG1_EXT8_MASK|ADW_SCSI_CFG1_INT8_MASK|ADW_SCSI_CFG1_INT16_MASK)
/*
* Addendum for ASC-38C0800 Chip
*/
#define ADW2_SCSI_CFG1_DIS_TERM_DRV 0x4000 /*
* The Terminators
* must be disabled
* in order to detect
* cable presence
*/
#define ADW2_SCSI_CFG1_DEV_DETECT 0x1C00
#define ADW2_SCSI_CFG1_DEV_DETECT_HVD 0x1000
#define ADW2_SCSI_CFG1_DEV_DETECT_LVD 0x0800
#define ADW2_SCSI_CFG1_DEV_DETECT_SE 0x0400
#define ADW2_SCSI_CFG1_TERM_CTL_LVD 0x00C0 /* Ultra2 Only */
#define ADW2_SCSI_CFG1_TERM_LVD_HI 0x0080
#define ADW2_SCSI_CFG1_TERM_LVD_LO 0x0040
#define ADW2_SCSI_CFG1_EXTLVD_MASK 0x0008 /* ExtLVD cable pres */
#define ADW2_SCSI_CFG1_INTLVD_MASK 0x0004 /* IntLVD cable pres */
#define ADW_MEM_CFG 0x0010
#define ADW_MEM_CFG_BIOS_EN 0x40
#define ADW_MEM_CFG_FAST_EE_CLK 0x20 /* Diagnostic Bit */
#define ADW_MEM_CFG_RAM_SZ_MASK 0x1C /* RISC RAM Size */
#define ADW_MEM_CFG_RAM_SZ_2KB 0x00
#define ADW_MEM_CFG_RAM_SZ_4KB 0x04
#define ADW_MEM_CFG_RAM_SZ_8KB 0x08
#define ADW_MEM_CFG_RAM_SZ_16KB 0x0C
#define ADW_MEM_CFG_RAM_SZ_32KB 0x10
#define ADW_MEM_CFG_RAM_SZ_64KB 0x14
#define ADW_GPIO_CNTL 0x0011
#define ADW_GPIO_DATA 0x0012
#define ADW_COMMA 0x0014
#define ADW_COMMB 0x0018
#define ADW_EEP_CMD 0x001A
#define ADW_EEP_CMD_READ 0x0080 /* or in address */
#define ADW_EEP_CMD_WRITE 0x0040 /* or in address */
#define ADW_EEP_CMD_WRITE_ABLE 0x0030
#define ADW_EEP_CMD_WRITE_DISABLE 0x0000
#define ADW_EEP_CMD_DONE 0x0200
#define ADW_EEP_CMD_DONE_ERR 0x0001
#define ADW_EEP_DELAY_MS 100
#define ADW_EEP_DATA 0x001C
#define ADW_DMA_CFG0 0x0020
#define ADW_DMA_CFG0_BC_THRESH_ENB 0x80
#define ADW_DMA_CFG0_FIFO_THRESH 0x70
#define ADW_DMA_CFG0_FIFO_THRESH_16B 0x00
#define ADW_DMA_CFG0_FIFO_THRESH_32B 0x20
#define ADW_DMA_CFG0_FIFO_THRESH_48B 0x30
#define ADW_DMA_CFG0_FIFO_THRESH_64B 0x40
#define ADW_DMA_CFG0_FIFO_THRESH_80B 0x50
#define ADW_DMA_CFG0_FIFO_THRESH_96B 0x60
#define ADW_DMA_CFG0_FIFO_THRESH_112B 0x70
#define ADW_DMA_CFG0_START_CTL_MASK 0x0C
#define ADW_DMA_CFG0_START_CTL_TH 0x00 /* Start on thresh */
#define ADW_DMA_CFG0_START_CTL_IDLE 0x04 /* Start when idle */
#define ADW_DMA_CFG0_START_CTL_TH_IDLE 0x08 /* Either */
#define ADW_DMA_CFG0_START_CTL_EM_FU 0x0C /* Start on full/empty */
#define ADW_DMA_CFG0_READ_CMD_MASK 0x03
#define ADW_DMA_CFG0_READ_CMD_MR 0x00
#define ADW_DMA_CFG0_READ_CMD_MRL 0x02
#define ADW_DMA_CFG0_READ_CMD_MRM 0x03
#define ADW_TICKLE 0x0022
#define ADW_TICKLE_NOP 0x00
#define ADW_TICKLE_A 0x01
#define ADW_TICKLE_B 0x02
#define ADW_TICKLE_C 0x03
/* Program Counter */
#define ADW_PC 0x2A
#define ADW_SCSI_CTRL 0x0034
#define ADW_SCSI_CTRL_RSTOUT 0x2000
/*
* ASC-38C0800 RAM BIST Register bit definitions
*/
#define ADW_RAM_BIST 0x0038
#define ADW_RAM_BIST_RAM_TEST_MODE 0x80
#define ADW_RAM_BIST_PRE_TEST_MODE 0x40
#define ADW_RAM_BIST_NORMAL_MODE 0x00
#define ADW_RAM_BIST_RAM_TEST_DONE 0x10
#define ADW_RAM_BIST_RAM_TEST_STATUS 0x0F
#define ADW_RAM_BIST_RAM_TEST_HOST_ERR 0x08
#define ADW_RAM_BIST_RAM_TEST_RAM_ERR 0x04
#define ADW_RAM_BIST_RAM_TEST_RISC_ERR 0x02
#define ADW_RAM_BIST_RAM_TEST_SCSI_ERR 0x01
#define ADW_RAM_BIST_RAM_TEST_SUCCESS 0x00
#define ADW_RAM_BIST_PRE_TEST_VALUE 0x05
#define ADW_RAM_BIST_NORMAL_VALUE 0x00
#define ADW_PLL_TEST 0x0039
#define ADW_SCSI_RESET_HOLD_TIME_US 60
/* LRAM Constants */
#define ADW_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */
#define ADW_3550_IOLEN 0x40 /* I/O Port Range in bytes */
#define ADW_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */
#define ADW_38C0800_IOLEN 0x100 /* I/O Port Range in bytes */
#define ADW_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */
#define ADW_38C1600_IOLEN 0x100 /* I/O Port Range in bytes */
#define ADW_38C1600_MEMLEN 0x1000 /* Memory Range 4KB */
#define ADW_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */
#define ADW_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */
#define PCI_ID_ADVANSYS_3550 0x230010CD00000000ull
#define PCI_ID_ADVANSYS_38C0800_REV1 0x250010CD00000000ull
#define PCI_ID_ADVANSYS_38C1600_REV1 0x270010CD00000000ull
#define PCI_ID_ALL_MASK 0xFFFFFFFFFFFFFFFFull
#define PCI_ID_DEV_VENDOR_MASK 0xFFFFFFFF00000000ull
/* ====================== SCSI Request Structures =========================== */
#define ADW_NO_OF_SG_PER_BLOCK 15
/*
* Although the adapter can deal with S/G lists of indefinite size,
* we limit the list to 30 to conserve space as the kernel can only send
* us buffers of at most 64KB currently.
*/
#define ADW_SG_BLOCKCNT 2
#define ADW_SGSIZE (ADW_NO_OF_SG_PER_BLOCK * ADW_SG_BLOCKCNT)
struct adw_sg_elm {
u_int32_t sg_addr;
u_int32_t sg_count;
};
/* sg block structure used by the microcode */
struct adw_sg_block {
u_int8_t reserved1;
u_int8_t reserved2;
u_int8_t reserved3;
u_int8_t sg_cnt; /* Valid entries in this block */
u_int32_t sg_busaddr_next; /* link to the next sg block */
struct adw_sg_elm sg_list[ADW_NO_OF_SG_PER_BLOCK];
};
/* Structure representing a single allocation block of adw sg blocks */
struct sg_map_node {
bus_dmamap_t sg_dmamap;
bus_addr_t sg_physaddr;
struct adw_sg_block* sg_vaddr;
SLIST_ENTRY(sg_map_node) links;
};
typedef enum {
QHSTA_NO_ERROR = 0x00,
QHSTA_M_SEL_TIMEOUT = 0x11,
QHSTA_M_DATA_OVER_RUN = 0x12,
QHSTA_M_UNEXPECTED_BUS_FREE = 0x13,
QHSTA_M_QUEUE_ABORTED = 0x15,
QHSTA_M_SXFR_SDMA_ERR = 0x16, /* SCSI DMA Error */
QHSTA_M_SXFR_SXFR_PERR = 0x17, /* SCSI Bus Parity Error */
QHSTA_M_RDMA_PERR = 0x18, /* RISC PCI DMA parity error */
QHSTA_M_SXFR_OFF_UFLW = 0x19, /* Offset Underflow */
QHSTA_M_SXFR_OFF_OFLW = 0x20, /* Offset Overflow */
QHSTA_M_SXFR_WD_TMO = 0x21, /* Watchdog Timeout */
QHSTA_M_SXFR_DESELECTED = 0x22, /* Deselected */
QHSTA_M_SXFR_XFR_PH_ERR = 0x24, /* Transfer Phase Error */
QHSTA_M_SXFR_UNKNOWN_ERROR = 0x25, /* SXFR_STATUS Unknown Error */
QHSTA_M_SCSI_BUS_RESET = 0x30, /* Request aborted from SBR */
QHSTA_M_SCSI_BUS_RESET_UNSOL= 0x31, /* Request aborted from unsol. SBR*/
QHSTA_M_BUS_DEVICE_RESET = 0x32, /* Request aborted from BDR */
QHSTA_M_DIRECTION_ERR = 0x35, /* Data Phase mismatch */
QHSTA_M_DIRECTION_ERR_HUNG = 0x36, /* Data Phase mismatch - bus hang */
QHSTA_M_WTM_TIMEOUT = 0x41,
QHSTA_M_BAD_CMPL_STATUS_IN = 0x42,
QHSTA_M_NO_AUTO_REQ_SENSE = 0x43,
QHSTA_M_AUTO_REQ_SENSE_FAIL = 0x44,
QHSTA_M_INVALID_DEVICE = 0x45, /* Bad target ID */
QHSTA_M_FROZEN_TIDQ = 0x46, /* TID Queue frozen. */
QHSTA_M_SGBACKUP_ERROR = 0x47 /* Scatter-Gather backup error */
} host_status_t;
typedef enum {
QD_NO_STATUS = 0x00, /* Request not completed yet. */
QD_NO_ERROR = 0x01,
QD_ABORTED_BY_HOST = 0x02,
QD_WITH_ERROR = 0x04
} done_status_t;
/*
* Microcode request structure
*
* All fields in this structure are used by the microcode so their
* size and ordering cannot be changed.
*/
struct adw_scsi_req_q {
u_int8_t cntl; /* Ucode flags and state. */
u_int8_t target_cmd;
u_int8_t target_id; /* Device target identifier. */
u_int8_t target_lun; /* Device target logical unit number. */
u_int32_t data_addr; /* Data buffer physical address. */
u_int32_t data_cnt; /* Data count. Ucode sets to residual. */
u_int32_t sense_baddr; /* Sense buffer bus address. */
u_int32_t carrier_baddr; /* Carrier bus address. */
u_int8_t mflag; /* microcode flag field. */
u_int8_t sense_len; /* Auto-sense length. Residual on complete. */
u_int8_t cdb_len; /* SCSI CDB length. */
u_int8_t scsi_cntl; /* SCSI command control flags (tags, nego) */
#define ADW_QSC_NO_DISC 0x01
#define ADW_QSC_NO_TAGMSG 0x02
#define ADW_QSC_NO_SYNC 0x04
#define ADW_QSC_NO_WIDE 0x08
#define ADW_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR */
#define ADW_QSC_SIMPLE_Q_TAG 0x00
#define ADW_QSC_HEAD_OF_Q_TAG 0x40
#define ADW_QSC_ORDERED_Q_TAG 0x80
u_int8_t done_status; /* Completion status. */
u_int8_t scsi_status; /* SCSI status byte. */
u_int8_t host_status; /* Ucode host status. */
u_int8_t sg_wk_ix; /* Microcode working SG index. */
u_int8_t cdb[12]; /* SCSI command block. */
u_int32_t sg_real_addr; /* SG list physical address. */
u_int32_t scsi_req_baddr; /* Bus address of this structure. */
u_int32_t sg_wk_data_cnt; /* Saved data count at disconnection. */
/*
* The 'tokens' placed in these two fields are
* used to identify the scsi request and the next
* carrier in the response queue, *not* physical
* addresses. This driver uses byte offsets for
* portability and speed of mapping back to either
* a virtual or physical address.
*/
u_int32_t scsi_req_bo; /* byte offset of this structure */
u_int32_t carrier_bo; /* byte offst of our carrier. */
};
typedef enum {
ACB_FREE = 0x00,
ACB_ACTIVE = 0x01,
ACB_RELEASE_SIMQ = 0x02,
ACB_RECOVERY_ACB = 0x04
} acb_state;
struct acb {
struct adw_scsi_req_q queue;
bus_dmamap_t dmamap;
acb_state state;
union ccb *ccb;
struct adw_sg_block* sg_blocks;
bus_addr_t sg_busaddr;
struct scsi_sense_data sense_data;
SLIST_ENTRY(acb) links;
};
/*
* EEPROM configuration format
*
* Field naming convention:
*
* *_enable indicates the field enables or disables the feature. The
* value is never reset.
*
* *_able indicates both whether a feature should be enabled or disabled
* and whether a device is capable of the feature. At initialization
* this field may be set, but later if a device is found to be incapable
* of the feature, the field is cleared.
*
* Default values are maintained in a_init.c in the structure
* Default_EEPROM_Config.
*/
struct adw_eeprom
{
u_int16_t cfg_lsw; /* 00 power up initialization */
#define ADW_EEPROM_BIG_ENDIAN 0x8000
#define ADW_EEPROM_BIOS_ENABLE 0x4000
#define ADW_EEPROM_TERM_POL 0x2000
#define ADW_EEPROM_CIS_LD 0x1000
/* bit 13 set - Term Polarity Control */
/* bit 14 set - BIOS Enable */
/* bit 15 set - Big Endian Mode */
u_int16_t cfg_msw; /* unused */
u_int16_t disc_enable;
u_int16_t wdtr_able;
union {
/*
* sync enable bits for UW cards,
* actual sync rate for TID 0-3
* on U2W and U160 cards.
*/
u_int16_t sync_enable;
u_int16_t sdtr1;
} sync1;
u_int16_t start_motor;
u_int16_t tagqng_able;
u_int16_t bios_scan;
u_int16_t scam_tolerant;
u_int8_t adapter_scsi_id;
u_int8_t bios_boot_delay;
u_int8_t scsi_reset_delay;
u_int8_t bios_id_lun; /* high nibble is lun */
/* low nibble is scsi id */
u_int8_t termination_se; /* 0 - automatic */
#define ADW_EEPROM_TERM_AUTO 0
#define ADW_EEPROM_TERM_OFF 1
#define ADW_EEPROM_TERM_HIGH_ON 2
#define ADW_EEPROM_TERM_BOTH_ON 3
u_int8_t termination_lvd;
u_int16_t bios_ctrl;
#define ADW_BIOS_INIT_DIS 0x0001 /* Don't act as initiator */
#define ADW_BIOS_EXT_TRANS 0x0002 /* > 1 GB support */
#define ADW_BIOS_MORE_2DISK 0x0004 /* > 1 GB support */
#define ADW_BIOS_NO_REMOVABLE 0x0008 /* don't support removable media */
#define ADW_BIOS_CD_BOOT 0x0010 /* support bootable CD */
#define ADW_BIOS_SCAN_EN 0x0020 /* BIOS SCAN enabled */
#define ADW_BIOS_MULTI_LUN 0x0040 /* probe luns */
#define ADW_BIOS_MESSAGE 0x0080 /* display BIOS message */
#define ADW_BIOS_RESET_BUS 0x0200 /* reset SCSI bus durint init */
#define ADW_BIOS_QUIET 0x0800 /* No verbose initialization */
#define ADW_BIOS_SCSI_PAR_EN 0x1000 /* SCSI parity enabled */
union {
/* 13
* ultra enable bits for UW cards,
* actual sync rate for TID 4-7
* on U2W and U160 cards.
*/
u_int16_t ultra_enable;
u_int16_t sdtr2;
} sync2;
union {
/* 14
* reserved for UW cards,
* actual sync rate for TID 8-11
* on U2W and U160 cards.
*/
u_int16_t reserved;
u_int16_t sdtr3;
} sync3;
u_int8_t max_host_qng; /* 15 maximum host queuing */
u_int8_t max_dvc_qng; /* maximum per device queuing */
u_int16_t dvc_cntl; /* 16 control bit for driver */
union {
/* 17
* reserved for UW cards,
* actual sync rate for TID 12-15
* on U2W and U160 cards.
*/
u_int16_t reserved;
u_int16_t sdtr4;
} sync4;
u_int16_t serial_number[3]; /* 18-20 */
u_int16_t checksum; /* 21 */
u_int8_t oem_name[16]; /* 22 - 29 */
u_int16_t dvc_err_code; /* 30 */
u_int16_t adv_err_code; /* 31 */
u_int16_t adv_err_addr; /* 32 */
u_int16_t saved_dvc_err_code; /* 33 */
u_int16_t saved_adv_err_code; /* 34 */
u_int16_t saved_adv_err_addr; /* 35 */
u_int16_t reserved[20]; /* 36 - 55 */
u_int16_t cisptr_lsw; /* 56 CIS data */
u_int16_t cisptr_msw; /* 57 CIS data */
u_int32_t subid; /* 58-59 SubSystem Vendor/Dev ID */
u_int16_t reserved2[4];
};
/* EEProm Addresses */
#define ADW_EEP_DVC_CFG_BEGIN 0x00
#define ADW_EEP_DVC_CFG_END (offsetof(struct adw_eeprom, checksum)/2)
#define ADW_EEP_DVC_CTL_BEGIN (offsetof(struct adw_eeprom, oem_name)/2)
#define ADW_EEP_MAX_WORD_ADDR (sizeof(struct adw_eeprom)/2)
#define ADW_BUS_RESET_HOLD_DELAY_US 100
typedef enum {
ADW_CHIP_NONE,
ADW_CHIP_ASC3550, /* Ultra-Wide IC */
ADW_CHIP_ASC38C0800, /* Ultra2-Wide/LVD IC */
ADW_CHIP_ASC38C1600 /* Ultra3-Wide/LVD2 IC */
} adw_chip;
typedef enum {
ADW_FENONE = 0x0000,
ADW_ULTRA = 0x0001, /* Supports 20MHz Transfers */
ADW_ULTRA2 = 0x0002, /* Supports 40MHz Transfers */
ADW_DT = 0x0004, /* Supports Double Transistion REQ/ACK*/
ADW_WIDE = 0x0008, /* Wide Channel */
ADW_ASC3550_FE = ADW_ULTRA,
ADW_ASC38C0800_FE = ADW_ULTRA2,
ADW_ASC38C1600_FE = ADW_ULTRA2|ADW_DT
} adw_feature;
typedef enum {
ADW_FNONE = 0x0000,
ADW_EEPROM_FAILED = 0x0001
} adw_flag;
typedef enum {
ADW_STATE_NORMAL = 0x00,
ADW_RESOURCE_SHORTAGE = 0x01
} adw_state;
typedef enum {
ADW_MC_SDTR_ASYNC,
ADW_MC_SDTR_5,
ADW_MC_SDTR_10,
ADW_MC_SDTR_20,
ADW_MC_SDTR_40,
ADW_MC_SDTR_80
} adw_mc_sdtr;
struct adw_syncrate
{
adw_mc_sdtr mc_sdtr;
u_int8_t period;
char *rate;
};
/* We have an input and output queue for our carrier structures */
#define ADW_OUTPUT_QUEUE 0 /* Offset into carriers member */
#define ADW_INPUT_QUEUE 1 /* Offset into carriers member */
#define ADW_NUM_CARRIER_QUEUES 2
struct adw_softc
{
bus_space_tag_t tag;
bus_space_handle_t bsh;
adw_state state;
bus_dma_tag_t buffer_dmat;
struct acb *acbs;
struct adw_carrier *carriers;
struct adw_carrier *free_carriers;
struct adw_carrier *commandq;
struct adw_carrier *responseq;
LIST_HEAD(, ccb_hdr) pending_ccbs;
SLIST_HEAD(, acb) free_acb_list;
bus_dma_tag_t parent_dmat;
bus_dma_tag_t carrier_dmat; /* dmat for our acb carriers*/
bus_dmamap_t carrier_dmamap;
bus_dma_tag_t acb_dmat; /* dmat for our ccb array */
bus_dmamap_t acb_dmamap;
bus_dma_tag_t sg_dmat; /* dmat for our sg maps */
SLIST_HEAD(, sg_map_node) sg_maps;
bus_addr_t acb_busbase;
bus_addr_t carrier_busbase;
adw_chip chip;
adw_feature features;
adw_flag flags;
u_int memsize;
char channel;
struct cam_path *path;
struct cam_sim *sim;
struct resource *regs;
struct resource *irq;
void *ih;
const struct adw_mcode *mcode_data;
const struct adw_eeprom *default_eeprom;
device_t device;
int regs_res_type;
int regs_res_id;
int irq_res_type;
u_int max_acbs;
u_int num_acbs;
u_int initiator_id;
u_int init_level;
u_int unit;
char* name;
cam_status last_reset; /* Last reset type */
u_int16_t bios_ctrl;
u_int16_t user_wdtr;
u_int16_t user_sdtr[4]; /* A nibble per-device */
u_int16_t user_tagenb;
u_int16_t tagenb;
u_int16_t user_discenb;
u_int16_t serial_number[3];
};
extern const struct adw_eeprom adw_asc3550_default_eeprom;
extern const struct adw_eeprom adw_asc38C0800_default_eeprom;
extern const struct adw_syncrate adw_syncrates[];
extern const int adw_num_syncrates;
#define adw_inb(adw, port) \
bus_space_read_1((adw)->tag, (adw)->bsh, port)
#define adw_inw(adw, port) \
bus_space_read_2((adw)->tag, (adw)->bsh, port)
#define adw_inl(adw, port) \
bus_space_read_4((adw)->tag, (adw)->bsh, port)
#define adw_outb(adw, port, value) \
bus_space_write_1((adw)->tag, (adw)->bsh, port, value)
#define adw_outw(adw, port, value) \
bus_space_write_2((adw)->tag, (adw)->bsh, port, value)
#define adw_outl(adw, port, value) \
bus_space_write_4((adw)->tag, (adw)->bsh, port, value)
#define adw_set_multi_2(adw, port, value, count) \
bus_space_set_multi_2((adw)->tag, (adw)->bsh, port, value, count)
static __inline const char* adw_name(struct adw_softc *adw);
static __inline u_int adw_lram_read_8(struct adw_softc *adw, u_int addr);
static __inline u_int adw_lram_read_16(struct adw_softc *adw, u_int addr);
static __inline u_int adw_lram_read_32(struct adw_softc *adw, u_int addr);
static __inline void adw_lram_write_8(struct adw_softc *adw, u_int addr,
u_int value);
static __inline void adw_lram_write_16(struct adw_softc *adw, u_int addr,
u_int value);
static __inline void adw_lram_write_32(struct adw_softc *adw, u_int addr,
u_int value);
static __inline u_int32_t acbvtobo(struct adw_softc *adw,
struct acb *acb);
static __inline u_int32_t acbvtob(struct adw_softc *adw,
struct acb *acb);
static __inline struct acb * acbbotov(struct adw_softc *adw,
u_int32_t busaddr);
static __inline struct acb * acbbtov(struct adw_softc *adw,
u_int32_t busaddr);
static __inline u_int32_t carriervtobo(struct adw_softc *adw,
struct adw_carrier *carrier);
static __inline u_int32_t carriervtob(struct adw_softc *adw,
struct adw_carrier *carrier);
static __inline struct adw_carrier *
carrierbotov(struct adw_softc *adw,
u_int32_t byte_offset);
static __inline struct adw_carrier *
carrierbtov(struct adw_softc *adw,
u_int32_t baddr);
static __inline const char*
adw_name(struct adw_softc *adw)
{
return (adw->name);
}
static __inline u_int
adw_lram_read_8(struct adw_softc *adw, u_int addr)
{
adw_outw(adw, ADW_RAM_ADDR, addr);
return (adw_inb(adw, ADW_RAM_DATA));
}
static __inline u_int
adw_lram_read_16(struct adw_softc *adw, u_int addr)
{
adw_outw(adw, ADW_RAM_ADDR, addr);
return (adw_inw(adw, ADW_RAM_DATA));
}
static __inline u_int
adw_lram_read_32(struct adw_softc *adw, u_int addr)
{
u_int retval;
adw_outw(adw, ADW_RAM_ADDR, addr);
retval = adw_inw(adw, ADW_RAM_DATA);
retval |= (adw_inw(adw, ADW_RAM_DATA) << 16);
return (retval);
}
static __inline void
adw_lram_write_8(struct adw_softc *adw, u_int addr, u_int value)
{
adw_outw(adw, ADW_RAM_ADDR, addr);
adw_outb(adw, ADW_RAM_DATA, value);
}
static __inline void
adw_lram_write_16(struct adw_softc *adw, u_int addr, u_int value)
{
adw_outw(adw, ADW_RAM_ADDR, addr);
adw_outw(adw, ADW_RAM_DATA, value);
}
static __inline void
adw_lram_write_32(struct adw_softc *adw, u_int addr, u_int value)
{
adw_outw(adw, ADW_RAM_ADDR, addr);
adw_outw(adw, ADW_RAM_DATA, value);
adw_outw(adw, ADW_RAM_DATA, value >> 16);
}
static __inline u_int32_t
acbvtobo(struct adw_softc *adw, struct acb *acb)
{
return ((u_int32_t)((caddr_t)acb - (caddr_t)adw->acbs));
}
static __inline u_int32_t
acbvtob(struct adw_softc *adw, struct acb *acb)
{
return (adw->acb_busbase + acbvtobo(adw, acb));
}
static __inline struct acb *
acbbotov(struct adw_softc *adw, u_int32_t byteoffset)
{
return ((struct acb *)((caddr_t)adw->acbs + byteoffset));
}
static __inline struct acb *
acbbtov(struct adw_softc *adw, u_int32_t busaddr)
{
return (acbbotov(adw, busaddr - adw->acb_busbase));
}
/*
* Return the byte offset for a carrier relative to our array of carriers.
*/
static __inline u_int32_t
carriervtobo(struct adw_softc *adw, struct adw_carrier *carrier)
{
return ((u_int32_t)((caddr_t)carrier - (caddr_t)adw->carriers));
}
static __inline u_int32_t
carriervtob(struct adw_softc *adw, struct adw_carrier *carrier)
{
return (adw->carrier_busbase + carriervtobo(adw, carrier));
}
static __inline struct adw_carrier *
carrierbotov(struct adw_softc *adw, u_int32_t byte_offset)
{
return ((struct adw_carrier *)((caddr_t)adw->carriers + byte_offset));
}
static __inline struct adw_carrier *
carrierbtov(struct adw_softc *adw, u_int32_t baddr)
{
return (carrierbotov(adw, baddr - adw->carrier_busbase));
}
/* Intialization */
int adw_find_signature(struct adw_softc *adw);
void adw_reset_chip(struct adw_softc *adw);
int adw_reset_bus(struct adw_softc *adw);
u_int16_t adw_eeprom_read(struct adw_softc *adw, struct adw_eeprom *buf);
void adw_eeprom_write(struct adw_softc *adw, struct adw_eeprom *buf);
int adw_init_chip(struct adw_softc *adw, u_int term_scsicfg1);
void adw_set_user_sdtr(struct adw_softc *adw,
u_int tid, u_int mc_sdtr);
u_int adw_get_user_sdtr(struct adw_softc *adw, u_int tid);
void adw_set_chip_sdtr(struct adw_softc *adw, u_int tid, u_int sdtr);
u_int adw_get_chip_sdtr(struct adw_softc *adw, u_int tid);
u_int adw_find_sdtr(struct adw_softc *adw, u_int period);
u_int adw_find_period(struct adw_softc *adw, u_int mc_sdtr);
u_int adw_hshk_cfg_period_factor(u_int tinfo);
/* Idle Commands */
adw_idle_cmd_status_t adw_idle_cmd_send(struct adw_softc *adw, u_int cmd,
u_int parameter);
/* SCSI Transaction Processing */
static __inline void adw_send_acb(struct adw_softc *adw, struct acb *acb,
u_int32_t acb_baddr);
static __inline void adw_tickle_risc(struct adw_softc *adw, u_int value)
{
/*
* Tickle the RISC to tell it to read its Command Queue Head pointer.
*/
adw_outb(adw, ADW_TICKLE, value);
if (adw->chip == ADW_CHIP_ASC3550) {
/*
* Clear the tickle value. In the ASC-3550 the RISC flag
* command 'clr_tickle_a' does not work unless the host
* value is cleared.
*/
adw_outb(adw, ADW_TICKLE, ADW_TICKLE_NOP);
}
}
static __inline void
adw_send_acb(struct adw_softc *adw, struct acb *acb, u_int32_t acb_baddr)
{
struct adw_carrier *new_cq;
new_cq = adw->free_carriers;
adw->free_carriers = carrierbotov(adw, new_cq->next_ba);
new_cq->next_ba = ADW_CQ_STOPPER;
acb->queue.carrier_baddr = adw->commandq->carr_ba;
acb->queue.carrier_bo = adw->commandq->carr_offset;
adw->commandq->areq_ba = acbvtob(adw, acb);
adw->commandq->next_ba = new_cq->carr_ba;
#if 0
printf("EnQ 0x%x 0x%x 0x%x 0x%x\n",
adw->commandq->carr_offset,
adw->commandq->carr_ba,
adw->commandq->areq_ba,
adw->commandq->next_ba);
#endif
adw->commandq = new_cq;
adw_tickle_risc(adw, ADW_TICKLE_A);
}
#endif /* _ADWLIB_H_ */