| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/filemon/@/dev/mii/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/filemon/@/dev/mii/rgephy.c |
/*-
* Copyright (c) 2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/mii/rgephy.c 233492 2012-03-26 04:27:01Z yongari $");
/*
* Driver for the RealTek 8169S/8110S/8211B/8211C internal 10/100/1000 PHY.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/rgephyreg.h>
#include "miibus_if.h"
#include <machine/bus.h>
#include <pci/if_rlreg.h>
static int rgephy_probe(device_t);
static int rgephy_attach(device_t);
static device_method_t rgephy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, rgephy_probe),
DEVMETHOD(device_attach, rgephy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static devclass_t rgephy_devclass;
static driver_t rgephy_driver = {
"rgephy",
rgephy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(rgephy, miibus, rgephy_driver, rgephy_devclass, 0, 0);
static int rgephy_service(struct mii_softc *, struct mii_data *, int);
static void rgephy_status(struct mii_softc *);
static int rgephy_mii_phy_auto(struct mii_softc *, int);
static void rgephy_reset(struct mii_softc *);
static void rgephy_loop(struct mii_softc *);
static void rgephy_load_dspcode(struct mii_softc *);
static const struct mii_phydesc rgephys[] = {
MII_PHY_DESC(REALTEK, RTL8169S),
MII_PHY_END
};
static const struct mii_phy_funcs rgephy_funcs = {
rgephy_service,
rgephy_status,
rgephy_reset
};
static int
rgephy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, rgephys, BUS_PROBE_DEFAULT));
}
static int
rgephy_attach(device_t dev)
{
struct mii_softc *sc;
struct mii_attach_args *ma;
u_int flags;
sc = device_get_softc(dev);
ma = device_get_ivars(dev);
flags = 0;
if (strcmp(ma->mii_data->mii_ifp->if_dname, "re") == 0)
flags |= MIIF_PHYPRIV0;
mii_phy_dev_attach(dev, flags, &rgephy_funcs, 0);
/* RTL8169S do not report auto-sense; add manually. */
sc->mii_capabilities = (PHY_READ(sc, MII_BMSR) | BMSR_ANEG) &
sc->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
/*
* Allow IFM_FLAG0 to be set indicating that auto-negotiation with
* manual configuration, which is used to work around issues with
* certain setups by default, should not be triggered as it may in
* turn cause harm in some edge cases.
*/
sc->mii_pdata->mii_media.ifm_mask |= IFM_FLAG0;
PHY_RESET(sc);
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
rgephy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int reg, speed, gig, anar;
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
PHY_RESET(sc); /* XXX hardware bug work-around */
anar = PHY_READ(sc, RGEPHY_MII_ANAR);
anar &= ~(RGEPHY_ANAR_PC | RGEPHY_ANAR_ASP |
RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_TX |
RGEPHY_ANAR_10_FD | RGEPHY_ANAR_10);
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
#ifdef foo
/*
* If we're already in auto mode, just return.
*/
if (PHY_READ(sc, RGEPHY_MII_BMCR) & RGEPHY_BMCR_AUTOEN)
return (0);
#endif
(void)rgephy_mii_phy_auto(sc, ife->ifm_media);
break;
case IFM_1000_T:
speed = RGEPHY_S1000;
goto setit;
case IFM_100_TX:
speed = RGEPHY_S100;
anar |= RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_TX;
goto setit;
case IFM_10_T:
speed = RGEPHY_S10;
anar |= RGEPHY_ANAR_10_FD | RGEPHY_ANAR_10;
setit:
if ((ife->ifm_media & IFM_FLOW) != 0 &&
(mii->mii_media.ifm_media & IFM_FLAG0) != 0)
return (EINVAL);
if ((ife->ifm_media & IFM_FDX) != 0) {
speed |= RGEPHY_BMCR_FDX;
gig = RGEPHY_1000CTL_AFD;
anar &= ~(RGEPHY_ANAR_TX | RGEPHY_ANAR_10);
if ((ife->ifm_media & IFM_FLOW) != 0 ||
(sc->mii_flags & MIIF_FORCEPAUSE) != 0)
anar |=
RGEPHY_ANAR_PC | RGEPHY_ANAR_ASP;
} else {
gig = RGEPHY_1000CTL_AHD;
anar &=
~(RGEPHY_ANAR_TX_FD | RGEPHY_ANAR_10_FD);
}
if (IFM_SUBTYPE(ife->ifm_media) == IFM_1000_T) {
gig |= RGEPHY_1000CTL_MSE;
if ((ife->ifm_media & IFM_ETH_MASTER) != 0)
gig |= RGEPHY_1000CTL_MSC;
} else {
gig = 0;
anar &= ~RGEPHY_ANAR_ASP;
}
if ((mii->mii_media.ifm_media & IFM_FLAG0) == 0)
speed |=
RGEPHY_BMCR_AUTOEN | RGEPHY_BMCR_STARTNEG;
rgephy_loop(sc);
PHY_WRITE(sc, RGEPHY_MII_1000CTL, gig);
PHY_WRITE(sc, RGEPHY_MII_ANAR, anar);
PHY_WRITE(sc, RGEPHY_MII_BMCR, speed);
break;
case IFM_NONE:
PHY_WRITE(sc, MII_BMCR, BMCR_ISO | BMCR_PDOWN);
break;
default:
return (EINVAL);
}
break;
case MII_TICK:
/*
* Is the interface even up?
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/*
* Only used for autonegotiation.
*/
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
sc->mii_ticks = 0;
break;
}
/*
* Check to see if we have link. If we do, we don't
* need to restart the autonegotiation process.
*/
if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 &&
sc->mii_mpd_rev >= 2) {
/* RTL8211B(L) */
reg = PHY_READ(sc, RGEPHY_MII_SSR);
if (reg & RGEPHY_SSR_LINK) {
sc->mii_ticks = 0;
break;
}
} else {
reg = PHY_READ(sc, RL_GMEDIASTAT);
if (reg & RL_GMEDIASTAT_LINK) {
sc->mii_ticks = 0;
break;
}
}
/* Announce link loss right after it happens. */
if (sc->mii_ticks++ == 0)
break;
/* Only retry autonegotiation every mii_anegticks seconds. */
if (sc->mii_ticks <= sc->mii_anegticks)
return (0);
sc->mii_ticks = 0;
rgephy_mii_phy_auto(sc, ife->ifm_media);
break;
}
/* Update the media status. */
PHY_STATUS(sc);
/*
* Callback if something changed. Note that we need to poke
* the DSP on the RealTek PHYs if the media changes.
*
*/
if (sc->mii_media_active != mii->mii_media_active ||
sc->mii_media_status != mii->mii_media_status ||
cmd == MII_MEDIACHG) {
rgephy_load_dspcode(sc);
}
mii_phy_update(sc, cmd);
return (0);
}
static void
rgephy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int bmsr, bmcr;
uint16_t ssr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev >= 2) {
ssr = PHY_READ(sc, RGEPHY_MII_SSR);
if (ssr & RGEPHY_SSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
} else {
bmsr = PHY_READ(sc, RL_GMEDIASTAT);
if (bmsr & RL_GMEDIASTAT_LINK)
mii->mii_media_status |= IFM_ACTIVE;
}
bmsr = PHY_READ(sc, RGEPHY_MII_BMSR);
bmcr = PHY_READ(sc, RGEPHY_MII_BMCR);
if (bmcr & RGEPHY_BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & RGEPHY_BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if (bmcr & RGEPHY_BMCR_AUTOEN) {
if ((bmsr & RGEPHY_BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
}
if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev >= 2) {
ssr = PHY_READ(sc, RGEPHY_MII_SSR);
switch (ssr & RGEPHY_SSR_SPD_MASK) {
case RGEPHY_SSR_S1000:
mii->mii_media_active |= IFM_1000_T;
break;
case RGEPHY_SSR_S100:
mii->mii_media_active |= IFM_100_TX;
break;
case RGEPHY_SSR_S10:
mii->mii_media_active |= IFM_10_T;
break;
default:
mii->mii_media_active |= IFM_NONE;
break;
}
if (ssr & RGEPHY_SSR_FDX)
mii->mii_media_active |= IFM_FDX;
else
mii->mii_media_active |= IFM_HDX;
} else {
bmsr = PHY_READ(sc, RL_GMEDIASTAT);
if (bmsr & RL_GMEDIASTAT_1000MBPS)
mii->mii_media_active |= IFM_1000_T;
else if (bmsr & RL_GMEDIASTAT_100MBPS)
mii->mii_media_active |= IFM_100_TX;
else if (bmsr & RL_GMEDIASTAT_10MBPS)
mii->mii_media_active |= IFM_10_T;
else
mii->mii_media_active |= IFM_NONE;
if (bmsr & RL_GMEDIASTAT_FDX)
mii->mii_media_active |= IFM_FDX;
else
mii->mii_media_active |= IFM_HDX;
}
if ((mii->mii_media_active & IFM_FDX) != 0)
mii->mii_media_active |= mii_phy_flowstatus(sc);
if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T) &&
(PHY_READ(sc, RGEPHY_MII_1000STS) & RGEPHY_1000STS_MSR) != 0)
mii->mii_media_active |= IFM_ETH_MASTER;
}
static int
rgephy_mii_phy_auto(struct mii_softc *sc, int media)
{
int anar;
rgephy_loop(sc);
PHY_RESET(sc);
anar = BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA;
if ((media & IFM_FLOW) != 0 || (sc->mii_flags & MIIF_FORCEPAUSE) != 0)
anar |= RGEPHY_ANAR_PC | RGEPHY_ANAR_ASP;
PHY_WRITE(sc, RGEPHY_MII_ANAR, anar);
DELAY(1000);
PHY_WRITE(sc, RGEPHY_MII_1000CTL,
RGEPHY_1000CTL_AHD | RGEPHY_1000CTL_AFD);
DELAY(1000);
PHY_WRITE(sc, RGEPHY_MII_BMCR,
RGEPHY_BMCR_AUTOEN | RGEPHY_BMCR_STARTNEG);
DELAY(100);
return (EJUSTRETURN);
}
static void
rgephy_loop(struct mii_softc *sc)
{
int i;
if (sc->mii_mpd_rev < 2) {
PHY_WRITE(sc, RGEPHY_MII_BMCR, RGEPHY_BMCR_PDOWN);
DELAY(1000);
}
for (i = 0; i < 15000; i++) {
if (!(PHY_READ(sc, RGEPHY_MII_BMSR) & RGEPHY_BMSR_LINK)) {
#if 0
device_printf(sc->mii_dev, "looped %d\n", i);
#endif
break;
}
DELAY(10);
}
}
#define PHY_SETBIT(x, y, z) \
PHY_WRITE(x, y, (PHY_READ(x, y) | (z)))
#define PHY_CLRBIT(x, y, z) \
PHY_WRITE(x, y, (PHY_READ(x, y) & ~(z)))
/*
* Initialize RealTek PHY per the datasheet. The DSP in the PHYs of
* existing revisions of the 8169S/8110S chips need to be tuned in
* order to reliably negotiate a 1000Mbps link. This is only needed
* for rev 0 and rev 1 of the PHY. Later versions work without
* any fixups.
*/
static void
rgephy_load_dspcode(struct mii_softc *sc)
{
int val;
if (sc->mii_mpd_rev >= 2)
return;
PHY_WRITE(sc, 31, 0x0001);
PHY_WRITE(sc, 21, 0x1000);
PHY_WRITE(sc, 24, 0x65C7);
PHY_CLRBIT(sc, 4, 0x0800);
val = PHY_READ(sc, 4) & 0xFFF;
PHY_WRITE(sc, 4, val);
PHY_WRITE(sc, 3, 0x00A1);
PHY_WRITE(sc, 2, 0x0008);
PHY_WRITE(sc, 1, 0x1020);
PHY_WRITE(sc, 0, 0x1000);
PHY_SETBIT(sc, 4, 0x0800);
PHY_CLRBIT(sc, 4, 0x0800);
val = (PHY_READ(sc, 4) & 0xFFF) | 0x7000;
PHY_WRITE(sc, 4, val);
PHY_WRITE(sc, 3, 0xFF41);
PHY_WRITE(sc, 2, 0xDE60);
PHY_WRITE(sc, 1, 0x0140);
PHY_WRITE(sc, 0, 0x0077);
val = (PHY_READ(sc, 4) & 0xFFF) | 0xA000;
PHY_WRITE(sc, 4, val);
PHY_WRITE(sc, 3, 0xDF01);
PHY_WRITE(sc, 2, 0xDF20);
PHY_WRITE(sc, 1, 0xFF95);
PHY_WRITE(sc, 0, 0xFA00);
val = (PHY_READ(sc, 4) & 0xFFF) | 0xB000;
PHY_WRITE(sc, 4, val);
PHY_WRITE(sc, 3, 0xFF41);
PHY_WRITE(sc, 2, 0xDE20);
PHY_WRITE(sc, 1, 0x0140);
PHY_WRITE(sc, 0, 0x00BB);
val = (PHY_READ(sc, 4) & 0xFFF) | 0xF000;
PHY_WRITE(sc, 4, val);
PHY_WRITE(sc, 3, 0xDF01);
PHY_WRITE(sc, 2, 0xDF20);
PHY_WRITE(sc, 1, 0xFF95);
PHY_WRITE(sc, 0, 0xBF00);
PHY_SETBIT(sc, 4, 0x0800);
PHY_CLRBIT(sc, 4, 0x0800);
PHY_WRITE(sc, 31, 0x0000);
DELAY(40);
}
static void
rgephy_reset(struct mii_softc *sc)
{
uint16_t ssr;
if ((sc->mii_flags & MIIF_PHYPRIV0) == 0 && sc->mii_mpd_rev == 3) {
/* RTL8211C(L) */
ssr = PHY_READ(sc, RGEPHY_MII_SSR);
if ((ssr & RGEPHY_SSR_ALDPS) != 0) {
ssr &= ~RGEPHY_SSR_ALDPS;
PHY_WRITE(sc, RGEPHY_MII_SSR, ssr);
}
}
mii_phy_reset(sc);
DELAY(1000);
rgephy_load_dspcode(sc);
}