Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/filemon/@/mips/mips/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/filemon/@/mips/mips/vm_machdep.c |
/*- * Copyright (c) 1982, 1986 The Regents of the University of California. * Copyright (c) 1989, 1990 William Jolitz * Copyright (c) 1994 John Dyson * All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department, and William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)vm_machdep.c 7.3 (Berkeley) 5/13/91 * Utah $Hdr: vm_machdep.c 1.16.1.1 89/06/23$ * from: src/sys/i386/i386/vm_machdep.c,v 1.132.2.2 2000/08/26 04:19:26 yokota * JNPR: vm_machdep.c,v 1.8.2.2 2007/08/16 15:59:17 girish */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/mips/mips/vm_machdep.c 217944 2011-01-27 14:49:22Z jchandra $"); #include "opt_cputype.h" #include "opt_ddb.h" #include <sys/param.h> #include <sys/systm.h> #include <sys/malloc.h> #include <sys/proc.h> #include <sys/syscall.h> #include <sys/buf.h> #include <sys/vnode.h> #include <sys/vmmeter.h> #include <sys/kernel.h> #include <sys/sysctl.h> #include <sys/unistd.h> #include <machine/asm.h> #include <machine/cache.h> #include <machine/clock.h> #include <machine/cpu.h> #include <machine/md_var.h> #include <machine/pcb.h> #include <vm/vm.h> #include <vm/vm_extern.h> #include <vm/pmap.h> #include <vm/vm_kern.h> #include <vm/vm_map.h> #include <vm/vm_page.h> #include <vm/vm_pageout.h> #include <vm/vm_param.h> #include <vm/uma.h> #include <vm/uma_int.h> #include <sys/user.h> #include <sys/mbuf.h> #include <sys/sf_buf.h> #ifndef NSFBUFS #define NSFBUFS (512 + maxusers * 16) #endif #ifndef __mips_n64 static void sf_buf_init(void *arg); SYSINIT(sock_sf, SI_SUB_MBUF, SI_ORDER_ANY, sf_buf_init, NULL); /* * Expanded sf_freelist head. Really an SLIST_HEAD() in disguise, with the * sf_freelist head with the sf_lock mutex. */ static struct { SLIST_HEAD(, sf_buf) sf_head; struct mtx sf_lock; } sf_freelist; static u_int sf_buf_alloc_want; #endif /* * Finish a fork operation, with process p2 nearly set up. * Copy and update the pcb, set up the stack so that the child * ready to run and return to user mode. */ void cpu_fork(register struct thread *td1,register struct proc *p2, struct thread *td2,int flags) { register struct proc *p1; struct pcb *pcb2; p1 = td1->td_proc; if ((flags & RFPROC) == 0) return; /* It is assumed that the vm_thread_alloc called * cpu_thread_alloc() before cpu_fork is called. */ /* Point the pcb to the top of the stack */ pcb2 = td2->td_pcb; /* Copy p1's pcb, note that in this case * our pcb also includes the td_frame being copied * too. The older mips2 code did an additional copy * of the td_frame, for us that's not needed any * longer (this copy does them both) */ bcopy(td1->td_pcb, pcb2, sizeof(*pcb2)); /* Point mdproc and then copy over td1's contents * md_proc is empty for MIPS */ td2->td_md.md_flags = td1->td_md.md_flags & MDTD_FPUSED; /* * Set up return-value registers as fork() libc stub expects. */ td2->td_frame->v0 = 0; td2->td_frame->v1 = 1; td2->td_frame->a3 = 0; if (td1 == PCPU_GET(fpcurthread)) MipsSaveCurFPState(td1); pcb2->pcb_context[PCB_REG_RA] = (register_t)(intptr_t)fork_trampoline; /* Make sp 64-bit aligned */ pcb2->pcb_context[PCB_REG_SP] = (register_t)(((vm_offset_t)td2->td_pcb & ~(sizeof(__int64_t) - 1)) - CALLFRAME_SIZ); pcb2->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)fork_return; pcb2->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)td2; pcb2->pcb_context[PCB_REG_S2] = (register_t)(intptr_t)td2->td_frame; pcb2->pcb_context[PCB_REG_SR] = mips_rd_status() & (MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_INT_MASK); /* * FREEBSD_DEVELOPERS_FIXME: * Setup any other CPU-Specific registers (Not MIPS Standard) * and/or bits in other standard MIPS registers (if CPU-Specific) * that are needed. */ td2->td_md.md_tls = td1->td_md.md_tls; td2->td_md.md_saved_intr = MIPS_SR_INT_IE; td2->td_md.md_spinlock_count = 1; #ifdef CPU_CNMIPS pcb2->pcb_context[PCB_REG_SR] |= MIPS_SR_COP_2_BIT | MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX; #endif } /* * Intercept the return address from a freshly forked process that has NOT * been scheduled yet. * * This is needed to make kernel threads stay in kernel mode. */ void cpu_set_fork_handler(struct thread *td, void (*func) __P((void *)), void *arg) { /* * Note that the trap frame follows the args, so the function * is really called like this: func(arg, frame); */ td->td_pcb->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)func; td->td_pcb->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)arg; } void cpu_exit(struct thread *td) { } void cpu_thread_exit(struct thread *td) { if (PCPU_GET(fpcurthread) == td) PCPU_GET(fpcurthread) = (struct thread *)0; } void cpu_thread_free(struct thread *td) { } void cpu_thread_clean(struct thread *td) { } void cpu_thread_swapin(struct thread *td) { pt_entry_t *pte; int i; /* * The kstack may be at a different physical address now. * Cache the PTEs for the Kernel stack in the machine dependent * part of the thread struct so cpu_switch() can quickly map in * the pcb struct and kernel stack. */ for (i = 0; i < KSTACK_PAGES; i++) { pte = pmap_pte(kernel_pmap, td->td_kstack + i * PAGE_SIZE); td->td_md.md_upte[i] = *pte & ~TLBLO_SWBITS_MASK; } } void cpu_thread_swapout(struct thread *td) { } void cpu_thread_alloc(struct thread *td) { pt_entry_t *pte; int i; KASSERT((td->td_kstack & (1 << PAGE_SHIFT)) == 0, ("kernel stack must be aligned.")); td->td_pcb = (struct pcb *)(td->td_kstack + td->td_kstack_pages * PAGE_SIZE) - 1; td->td_frame = &td->td_pcb->pcb_regs; for (i = 0; i < KSTACK_PAGES; i++) { pte = pmap_pte(kernel_pmap, td->td_kstack + i * PAGE_SIZE); td->td_md.md_upte[i] = *pte & ~TLBLO_SWBITS_MASK; } } void cpu_set_syscall_retval(struct thread *td, int error) { struct trapframe *locr0 = td->td_frame; unsigned int code; int quad_syscall; code = locr0->v0; quad_syscall = 0; #if defined(__mips_o32) if (code == SYS___syscall) quad_syscall = 1; #endif if (code == SYS_syscall) code = locr0->a0; else if (code == SYS___syscall) { if (quad_syscall) code = _QUAD_LOWWORD ? locr0->a1 : locr0->a0; else code = locr0->a0; } switch (error) { case 0: if (quad_syscall && code != SYS_lseek) { /* * System call invoked through the * SYS___syscall interface but the * return value is really just 32 * bits. */ locr0->v0 = td->td_retval[0]; if (_QUAD_LOWWORD) locr0->v1 = td->td_retval[0]; locr0->a3 = 0; } else { locr0->v0 = td->td_retval[0]; locr0->v1 = td->td_retval[1]; locr0->a3 = 0; } break; case ERESTART: locr0->pc = td->td_pcb->pcb_tpc; break; case EJUSTRETURN: break; /* nothing to do */ default: if (quad_syscall && code != SYS_lseek) { locr0->v0 = error; if (_QUAD_LOWWORD) locr0->v1 = error; locr0->a3 = 1; } else { locr0->v0 = error; locr0->a3 = 1; } } } /* * Initialize machine state (pcb and trap frame) for a new thread about to * upcall. Put enough state in the new thread's PCB to get it to go back * userret(), where we can intercept it again to set the return (upcall) * Address and stack, along with those from upcalls that are from other sources * such as those generated in thread_userret() itself. */ void cpu_set_upcall(struct thread *td, struct thread *td0) { struct pcb *pcb2; /* Point the pcb to the top of the stack. */ pcb2 = td->td_pcb; /* * Copy the upcall pcb. This loads kernel regs. * Those not loaded individually below get their default * values here. * * XXXKSE It might be a good idea to simply skip this as * the values of the other registers may be unimportant. * This would remove any requirement for knowing the KSE * at this time (see the matching comment below for * more analysis) (need a good safe default). * In MIPS, the trapframe is the first element of the PCB * and gets copied when we copy the PCB. No separate copy * is needed. */ bcopy(td0->td_pcb, pcb2, sizeof(*pcb2)); /* * Set registers for trampoline to user mode. */ pcb2->pcb_context[PCB_REG_RA] = (register_t)(intptr_t)fork_trampoline; /* Make sp 64-bit aligned */ pcb2->pcb_context[PCB_REG_SP] = (register_t)(((vm_offset_t)td->td_pcb & ~(sizeof(__int64_t) - 1)) - CALLFRAME_SIZ); pcb2->pcb_context[PCB_REG_S0] = (register_t)(intptr_t)fork_return; pcb2->pcb_context[PCB_REG_S1] = (register_t)(intptr_t)td; pcb2->pcb_context[PCB_REG_S2] = (register_t)(intptr_t)td->td_frame; /* Dont set IE bit in SR. sched lock release will take care of it */ pcb2->pcb_context[PCB_REG_SR] = mips_rd_status() & (MIPS_SR_KX | MIPS_SR_UX | MIPS_SR_INT_MASK); #ifdef CPU_CNMIPS pcb2->pcb_context[PCB_REG_SR] |= MIPS_SR_COP_2_BIT | MIPS_SR_COP_0_BIT | MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX; #endif /* * FREEBSD_DEVELOPERS_FIXME: * Setup any other CPU-Specific registers (Not MIPS Standard) * that are needed. */ /* SMP Setup to release sched_lock in fork_exit(). */ td->td_md.md_spinlock_count = 1; td->td_md.md_saved_intr = MIPS_SR_INT_IE; #if 0 /* Maybe we need to fix this? */ td->td_md.md_saved_sr = ( (MIPS_SR_COP_2_BIT | MIPS_SR_COP_0_BIT) | (MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX | MIPS_SR_SX) | (MIPS_SR_INT_IE | MIPS_HARD_INT_MASK)); #endif } /* * Set that machine state for performing an upcall that has to * be done in thread_userret() so that those upcalls generated * in thread_userret() itself can be done as well. */ void cpu_set_upcall_kse(struct thread *td, void (*entry)(void *), void *arg, stack_t *stack) { struct trapframe *tf; register_t sp; /* * At the point where a function is called, sp must be 8 * byte aligned[for compatibility with 64-bit CPUs] * in ``See MIPS Run'' by D. Sweetman, p. 269 * align stack */ sp = ((register_t)(intptr_t)(stack->ss_sp + stack->ss_size) & ~0x7) - CALLFRAME_SIZ; /* * Set the trap frame to point at the beginning of the uts * function. */ tf = td->td_frame; bzero(tf, sizeof(struct trapframe)); tf->sp = sp; tf->pc = (register_t)(intptr_t)entry; /* * MIPS ABI requires T9 to be the same as PC * in subroutine entry point */ tf->t9 = (register_t)(intptr_t)entry; tf->a0 = (register_t)(intptr_t)arg; /* * Keep interrupt mask */ td->td_frame->sr = MIPS_SR_KSU_USER | MIPS_SR_EXL | MIPS_SR_INT_IE | (mips_rd_status() & MIPS_SR_INT_MASK); #if defined(__mips_n32) td->td_frame->sr |= MIPS_SR_PX; #elif defined(__mips_n64) td->td_frame->sr |= MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX; #endif #ifdef CPU_CNMIPS tf->sr |= MIPS_SR_INT_IE | MIPS_SR_COP_0_BIT | MIPS_SR_PX | MIPS_SR_UX | MIPS_SR_KX; #endif /* tf->sr |= (ALL_INT_MASK & idle_mask) | SR_INT_ENAB; */ /**XXX the above may now be wrong -- mips2 implements this as panic */ /* * FREEBSD_DEVELOPERS_FIXME: * Setup any other CPU-Specific registers (Not MIPS Standard) * that are needed. */ } /* * Convert kernel VA to physical address */ u_long kvtop(void *addr) { vm_offset_t va; va = pmap_kextract((vm_offset_t)addr); if (va == 0) panic("kvtop: zero page frame"); return((intptr_t)va); } /* * Implement the pre-zeroed page mechanism. * This routine is called from the idle loop. */ #define ZIDLE_LO(v) ((v) * 2 / 3) #define ZIDLE_HI(v) ((v) * 4 / 5) /* * Allocate a pool of sf_bufs (sendfile(2) or "super-fast" if you prefer. :-)) */ #ifndef __mips_n64 static void sf_buf_init(void *arg) { struct sf_buf *sf_bufs; vm_offset_t sf_base; int i; nsfbufs = NSFBUFS; TUNABLE_INT_FETCH("kern.ipc.nsfbufs", &nsfbufs); mtx_init(&sf_freelist.sf_lock, "sf_bufs list lock", NULL, MTX_DEF); SLIST_INIT(&sf_freelist.sf_head); sf_base = kmem_alloc_nofault(kernel_map, nsfbufs * PAGE_SIZE); sf_bufs = malloc(nsfbufs * sizeof(struct sf_buf), M_TEMP, M_NOWAIT | M_ZERO); for (i = 0; i < nsfbufs; i++) { sf_bufs[i].kva = sf_base + i * PAGE_SIZE; SLIST_INSERT_HEAD(&sf_freelist.sf_head, &sf_bufs[i], free_list); } sf_buf_alloc_want = 0; } #endif /* * Get an sf_buf from the freelist. Will block if none are available. */ struct sf_buf * sf_buf_alloc(struct vm_page *m, int flags) { #ifndef __mips_n64 struct sf_buf *sf; int error; mtx_lock(&sf_freelist.sf_lock); while ((sf = SLIST_FIRST(&sf_freelist.sf_head)) == NULL) { if (flags & SFB_NOWAIT) break; sf_buf_alloc_want++; mbstat.sf_allocwait++; error = msleep(&sf_freelist, &sf_freelist.sf_lock, (flags & SFB_CATCH) ? PCATCH | PVM : PVM, "sfbufa", 0); sf_buf_alloc_want--; /* * If we got a signal, don't risk going back to sleep. */ if (error) break; } if (sf != NULL) { SLIST_REMOVE_HEAD(&sf_freelist.sf_head, free_list); sf->m = m; nsfbufsused++; nsfbufspeak = imax(nsfbufspeak, nsfbufsused); pmap_qenter(sf->kva, &sf->m, 1); } mtx_unlock(&sf_freelist.sf_lock); return (sf); #else return ((struct sf_buf *)m); #endif } /* * Release resources back to the system. */ void sf_buf_free(struct sf_buf *sf) { #ifndef __mips_n64 pmap_qremove(sf->kva, 1); mtx_lock(&sf_freelist.sf_lock); SLIST_INSERT_HEAD(&sf_freelist.sf_head, sf, free_list); nsfbufsused--; if (sf_buf_alloc_want > 0) wakeup(&sf_freelist); mtx_unlock(&sf_freelist.sf_lock); #endif } /* * Software interrupt handler for queued VM system processing. */ void swi_vm(void *dummy) { if (busdma_swi_pending) busdma_swi(); } int cpu_set_user_tls(struct thread *td, void *tls_base) { td->td_md.md_tls = tls_base; return (0); } #ifdef DDB #include <ddb/ddb.h> #define DB_PRINT_REG(ptr, regname) \ db_printf(" %-12s %p\n", #regname, (void *)(intptr_t)((ptr)->regname)) #define DB_PRINT_REG_ARRAY(ptr, arrname, regname) \ db_printf(" %-12s %p\n", #regname, (void *)(intptr_t)((ptr)->arrname[regname])) static void dump_trapframe(struct trapframe *trapframe) { db_printf("Trapframe at %p\n", trapframe); DB_PRINT_REG(trapframe, zero); DB_PRINT_REG(trapframe, ast); DB_PRINT_REG(trapframe, v0); DB_PRINT_REG(trapframe, v1); DB_PRINT_REG(trapframe, a0); DB_PRINT_REG(trapframe, a1); DB_PRINT_REG(trapframe, a2); DB_PRINT_REG(trapframe, a3); DB_PRINT_REG(trapframe, t0); DB_PRINT_REG(trapframe, t1); DB_PRINT_REG(trapframe, t2); DB_PRINT_REG(trapframe, t3); DB_PRINT_REG(trapframe, t4); DB_PRINT_REG(trapframe, t5); DB_PRINT_REG(trapframe, t6); DB_PRINT_REG(trapframe, t7); DB_PRINT_REG(trapframe, s0); DB_PRINT_REG(trapframe, s1); DB_PRINT_REG(trapframe, s2); DB_PRINT_REG(trapframe, s3); DB_PRINT_REG(trapframe, s4); DB_PRINT_REG(trapframe, s5); DB_PRINT_REG(trapframe, s6); DB_PRINT_REG(trapframe, s7); DB_PRINT_REG(trapframe, t8); DB_PRINT_REG(trapframe, t9); DB_PRINT_REG(trapframe, k0); DB_PRINT_REG(trapframe, k1); DB_PRINT_REG(trapframe, gp); DB_PRINT_REG(trapframe, sp); DB_PRINT_REG(trapframe, s8); DB_PRINT_REG(trapframe, ra); DB_PRINT_REG(trapframe, sr); DB_PRINT_REG(trapframe, mullo); DB_PRINT_REG(trapframe, mulhi); DB_PRINT_REG(trapframe, badvaddr); DB_PRINT_REG(trapframe, cause); DB_PRINT_REG(trapframe, pc); } DB_SHOW_COMMAND(pcb, ddb_dump_pcb) { struct thread *td; struct pcb *pcb; struct trapframe *trapframe; /* Determine which thread to examine. */ if (have_addr) td = db_lookup_thread(addr, TRUE); else td = curthread; pcb = td->td_pcb; db_printf("Thread %d at %p\n", td->td_tid, td); db_printf("PCB at %p\n", pcb); trapframe = &pcb->pcb_regs; dump_trapframe(trapframe); db_printf("PCB Context:\n"); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S0); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S1); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S2); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S3); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S4); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S5); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S6); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S7); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_SP); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_S8); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_RA); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_SR); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_GP); DB_PRINT_REG_ARRAY(pcb, pcb_context, PCB_REG_PC); db_printf("PCB onfault = %p\n", pcb->pcb_onfault); db_printf("md_saved_intr = 0x%0lx\n", (long)td->td_md.md_saved_intr); db_printf("md_spinlock_count = %d\n", td->td_md.md_spinlock_count); if (td->td_frame != trapframe) { db_printf("td->td_frame %p is not the same as pcb_regs %p\n", td->td_frame, trapframe); } } /* * Dump the trapframe beginning at address specified by first argument. */ DB_SHOW_COMMAND(trapframe, ddb_dump_trapframe) { if (!have_addr) return; dump_trapframe((struct trapframe *)addr); } #endif /* DDB */