Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_journal/@/x86/cpufreq/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_journal/@/x86/cpufreq/est.c |
/*- * Copyright (c) 2004 Colin Percival * Copyright (c) 2005 Nate Lawson * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted providing that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/x86/cpufreq/est.c 220433 2011-04-07 23:28:28Z jkim $"); #include <sys/param.h> #include <sys/bus.h> #include <sys/cpu.h> #include <sys/kernel.h> #include <sys/malloc.h> #include <sys/module.h> #include <sys/smp.h> #include <sys/systm.h> #include "cpufreq_if.h" #include <machine/clock.h> #include <machine/cputypes.h> #include <machine/md_var.h> #include <machine/specialreg.h> #include <contrib/dev/acpica/include/acpi.h> #include <dev/acpica/acpivar.h> #include "acpi_if.h" /* Status/control registers (from the IA-32 System Programming Guide). */ #define MSR_PERF_STATUS 0x198 #define MSR_PERF_CTL 0x199 /* Register and bit for enabling SpeedStep. */ #define MSR_MISC_ENABLE 0x1a0 #define MSR_SS_ENABLE (1<<16) /* Frequency and MSR control values. */ typedef struct { uint16_t freq; uint16_t volts; uint16_t id16; int power; } freq_info; /* Identifying characteristics of a processor and supported frequencies. */ typedef struct { const u_int vendor_id; uint32_t id32; freq_info *freqtab; } cpu_info; struct est_softc { device_t dev; int acpi_settings; int msr_settings; freq_info *freq_list; }; /* Convert MHz and mV into IDs for passing to the MSR. */ #define ID16(MHz, mV, bus_clk) \ (((MHz / bus_clk) << 8) | ((mV ? mV - 700 : 0) >> 4)) #define ID32(MHz_hi, mV_hi, MHz_lo, mV_lo, bus_clk) \ ((ID16(MHz_lo, mV_lo, bus_clk) << 16) | (ID16(MHz_hi, mV_hi, bus_clk))) /* Format for storing IDs in our table. */ #define FREQ_INFO_PWR(MHz, mV, bus_clk, mW) \ { MHz, mV, ID16(MHz, mV, bus_clk), mW } #define FREQ_INFO(MHz, mV, bus_clk) \ FREQ_INFO_PWR(MHz, mV, bus_clk, CPUFREQ_VAL_UNKNOWN) #define INTEL(tab, zhi, vhi, zlo, vlo, bus_clk) \ { CPU_VENDOR_INTEL, ID32(zhi, vhi, zlo, vlo, bus_clk), tab } #define CENTAUR(tab, zhi, vhi, zlo, vlo, bus_clk) \ { CPU_VENDOR_CENTAUR, ID32(zhi, vhi, zlo, vlo, bus_clk), tab } static int msr_info_enabled = 0; TUNABLE_INT("hw.est.msr_info", &msr_info_enabled); static int strict = -1; TUNABLE_INT("hw.est.strict", &strict); /* Default bus clock value for Centrino processors. */ #define INTEL_BUS_CLK 100 /* XXX Update this if new CPUs have more settings. */ #define EST_MAX_SETTINGS 10 CTASSERT(EST_MAX_SETTINGS <= MAX_SETTINGS); /* Estimate in microseconds of latency for performing a transition. */ #define EST_TRANS_LAT 1000 /* * Frequency (MHz) and voltage (mV) settings. * * Dothan processors have multiple VID#s with different settings for * each VID#. Since we can't uniquely identify this info * without undisclosed methods from Intel, we can't support newer * processors with this table method. If ACPI Px states are supported, * we get info from them. * * Data from the "Intel Pentium M Processor Datasheet", * Order Number 252612-003, Table 5. */ static freq_info PM17_130[] = { /* 130nm 1.70GHz Pentium M */ FREQ_INFO(1700, 1484, INTEL_BUS_CLK), FREQ_INFO(1400, 1308, INTEL_BUS_CLK), FREQ_INFO(1200, 1228, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1004, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM16_130[] = { /* 130nm 1.60GHz Pentium M */ FREQ_INFO(1600, 1484, INTEL_BUS_CLK), FREQ_INFO(1400, 1420, INTEL_BUS_CLK), FREQ_INFO(1200, 1276, INTEL_BUS_CLK), FREQ_INFO(1000, 1164, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM15_130[] = { /* 130nm 1.50GHz Pentium M */ FREQ_INFO(1500, 1484, INTEL_BUS_CLK), FREQ_INFO(1400, 1452, INTEL_BUS_CLK), FREQ_INFO(1200, 1356, INTEL_BUS_CLK), FREQ_INFO(1000, 1228, INTEL_BUS_CLK), FREQ_INFO( 800, 1116, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM14_130[] = { /* 130nm 1.40GHz Pentium M */ FREQ_INFO(1400, 1484, INTEL_BUS_CLK), FREQ_INFO(1200, 1436, INTEL_BUS_CLK), FREQ_INFO(1000, 1308, INTEL_BUS_CLK), FREQ_INFO( 800, 1180, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM13_130[] = { /* 130nm 1.30GHz Pentium M */ FREQ_INFO(1300, 1388, INTEL_BUS_CLK), FREQ_INFO(1200, 1356, INTEL_BUS_CLK), FREQ_INFO(1000, 1292, INTEL_BUS_CLK), FREQ_INFO( 800, 1260, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM13_LV_130[] = { /* 130nm 1.30GHz Low Voltage Pentium M */ FREQ_INFO(1300, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1164, INTEL_BUS_CLK), FREQ_INFO(1100, 1100, INTEL_BUS_CLK), FREQ_INFO(1000, 1020, INTEL_BUS_CLK), FREQ_INFO( 900, 1004, INTEL_BUS_CLK), FREQ_INFO( 800, 988, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM12_LV_130[] = { /* 130 nm 1.20GHz Low Voltage Pentium M */ FREQ_INFO(1200, 1180, INTEL_BUS_CLK), FREQ_INFO(1100, 1164, INTEL_BUS_CLK), FREQ_INFO(1000, 1100, INTEL_BUS_CLK), FREQ_INFO( 900, 1020, INTEL_BUS_CLK), FREQ_INFO( 800, 1004, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM11_LV_130[] = { /* 130 nm 1.10GHz Low Voltage Pentium M */ FREQ_INFO(1100, 1180, INTEL_BUS_CLK), FREQ_INFO(1000, 1164, INTEL_BUS_CLK), FREQ_INFO( 900, 1100, INTEL_BUS_CLK), FREQ_INFO( 800, 1020, INTEL_BUS_CLK), FREQ_INFO( 600, 956, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM11_ULV_130[] = { /* 130 nm 1.10GHz Ultra Low Voltage Pentium M */ FREQ_INFO(1100, 1004, INTEL_BUS_CLK), FREQ_INFO(1000, 988, INTEL_BUS_CLK), FREQ_INFO( 900, 972, INTEL_BUS_CLK), FREQ_INFO( 800, 956, INTEL_BUS_CLK), FREQ_INFO( 600, 844, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM10_ULV_130[] = { /* 130 nm 1.00GHz Ultra Low Voltage Pentium M */ FREQ_INFO(1000, 1004, INTEL_BUS_CLK), FREQ_INFO( 900, 988, INTEL_BUS_CLK), FREQ_INFO( 800, 972, INTEL_BUS_CLK), FREQ_INFO( 600, 844, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; /* * Data from "Intel Pentium M Processor on 90nm Process with * 2-MB L2 Cache Datasheet", Order Number 302189-008, Table 5. */ static freq_info PM_765A_90[] = { /* 90 nm 2.10GHz Pentium M, VID #A */ FREQ_INFO(2100, 1340, INTEL_BUS_CLK), FREQ_INFO(1800, 1276, INTEL_BUS_CLK), FREQ_INFO(1600, 1228, INTEL_BUS_CLK), FREQ_INFO(1400, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1132, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_765B_90[] = { /* 90 nm 2.10GHz Pentium M, VID #B */ FREQ_INFO(2100, 1324, INTEL_BUS_CLK), FREQ_INFO(1800, 1260, INTEL_BUS_CLK), FREQ_INFO(1600, 1212, INTEL_BUS_CLK), FREQ_INFO(1400, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1132, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_765C_90[] = { /* 90 nm 2.10GHz Pentium M, VID #C */ FREQ_INFO(2100, 1308, INTEL_BUS_CLK), FREQ_INFO(1800, 1244, INTEL_BUS_CLK), FREQ_INFO(1600, 1212, INTEL_BUS_CLK), FREQ_INFO(1400, 1164, INTEL_BUS_CLK), FREQ_INFO(1200, 1116, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_765E_90[] = { /* 90 nm 2.10GHz Pentium M, VID #E */ FREQ_INFO(2100, 1356, INTEL_BUS_CLK), FREQ_INFO(1800, 1292, INTEL_BUS_CLK), FREQ_INFO(1600, 1244, INTEL_BUS_CLK), FREQ_INFO(1400, 1196, INTEL_BUS_CLK), FREQ_INFO(1200, 1148, INTEL_BUS_CLK), FREQ_INFO(1000, 1100, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_755A_90[] = { /* 90 nm 2.00GHz Pentium M, VID #A */ FREQ_INFO(2000, 1340, INTEL_BUS_CLK), FREQ_INFO(1800, 1292, INTEL_BUS_CLK), FREQ_INFO(1600, 1244, INTEL_BUS_CLK), FREQ_INFO(1400, 1196, INTEL_BUS_CLK), FREQ_INFO(1200, 1148, INTEL_BUS_CLK), FREQ_INFO(1000, 1100, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_755B_90[] = { /* 90 nm 2.00GHz Pentium M, VID #B */ FREQ_INFO(2000, 1324, INTEL_BUS_CLK), FREQ_INFO(1800, 1276, INTEL_BUS_CLK), FREQ_INFO(1600, 1228, INTEL_BUS_CLK), FREQ_INFO(1400, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1132, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_755C_90[] = { /* 90 nm 2.00GHz Pentium M, VID #C */ FREQ_INFO(2000, 1308, INTEL_BUS_CLK), FREQ_INFO(1800, 1276, INTEL_BUS_CLK), FREQ_INFO(1600, 1228, INTEL_BUS_CLK), FREQ_INFO(1400, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1132, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_755D_90[] = { /* 90 nm 2.00GHz Pentium M, VID #D */ FREQ_INFO(2000, 1276, INTEL_BUS_CLK), FREQ_INFO(1800, 1244, INTEL_BUS_CLK), FREQ_INFO(1600, 1196, INTEL_BUS_CLK), FREQ_INFO(1400, 1164, INTEL_BUS_CLK), FREQ_INFO(1200, 1116, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_745A_90[] = { /* 90 nm 1.80GHz Pentium M, VID #A */ FREQ_INFO(1800, 1340, INTEL_BUS_CLK), FREQ_INFO(1600, 1292, INTEL_BUS_CLK), FREQ_INFO(1400, 1228, INTEL_BUS_CLK), FREQ_INFO(1200, 1164, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_745B_90[] = { /* 90 nm 1.80GHz Pentium M, VID #B */ FREQ_INFO(1800, 1324, INTEL_BUS_CLK), FREQ_INFO(1600, 1276, INTEL_BUS_CLK), FREQ_INFO(1400, 1212, INTEL_BUS_CLK), FREQ_INFO(1200, 1164, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_745C_90[] = { /* 90 nm 1.80GHz Pentium M, VID #C */ FREQ_INFO(1800, 1308, INTEL_BUS_CLK), FREQ_INFO(1600, 1260, INTEL_BUS_CLK), FREQ_INFO(1400, 1212, INTEL_BUS_CLK), FREQ_INFO(1200, 1148, INTEL_BUS_CLK), FREQ_INFO(1000, 1100, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_745D_90[] = { /* 90 nm 1.80GHz Pentium M, VID #D */ FREQ_INFO(1800, 1276, INTEL_BUS_CLK), FREQ_INFO(1600, 1228, INTEL_BUS_CLK), FREQ_INFO(1400, 1180, INTEL_BUS_CLK), FREQ_INFO(1200, 1132, INTEL_BUS_CLK), FREQ_INFO(1000, 1084, INTEL_BUS_CLK), FREQ_INFO( 800, 1036, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_735A_90[] = { /* 90 nm 1.70GHz Pentium M, VID #A */ FREQ_INFO(1700, 1340, INTEL_BUS_CLK), FREQ_INFO(1400, 1244, INTEL_BUS_CLK), FREQ_INFO(1200, 1180, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_735B_90[] = { /* 90 nm 1.70GHz Pentium M, VID #B */ FREQ_INFO(1700, 1324, INTEL_BUS_CLK), FREQ_INFO(1400, 1244, INTEL_BUS_CLK), FREQ_INFO(1200, 1180, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_735C_90[] = { /* 90 nm 1.70GHz Pentium M, VID #C */ FREQ_INFO(1700, 1308, INTEL_BUS_CLK), FREQ_INFO(1400, 1228, INTEL_BUS_CLK), FREQ_INFO(1200, 1164, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_735D_90[] = { /* 90 nm 1.70GHz Pentium M, VID #D */ FREQ_INFO(1700, 1276, INTEL_BUS_CLK), FREQ_INFO(1400, 1212, INTEL_BUS_CLK), FREQ_INFO(1200, 1148, INTEL_BUS_CLK), FREQ_INFO(1000, 1100, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_725A_90[] = { /* 90 nm 1.60GHz Pentium M, VID #A */ FREQ_INFO(1600, 1340, INTEL_BUS_CLK), FREQ_INFO(1400, 1276, INTEL_BUS_CLK), FREQ_INFO(1200, 1212, INTEL_BUS_CLK), FREQ_INFO(1000, 1132, INTEL_BUS_CLK), FREQ_INFO( 800, 1068, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_725B_90[] = { /* 90 nm 1.60GHz Pentium M, VID #B */ FREQ_INFO(1600, 1324, INTEL_BUS_CLK), FREQ_INFO(1400, 1260, INTEL_BUS_CLK), FREQ_INFO(1200, 1196, INTEL_BUS_CLK), FREQ_INFO(1000, 1132, INTEL_BUS_CLK), FREQ_INFO( 800, 1068, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_725C_90[] = { /* 90 nm 1.60GHz Pentium M, VID #C */ FREQ_INFO(1600, 1308, INTEL_BUS_CLK), FREQ_INFO(1400, 1244, INTEL_BUS_CLK), FREQ_INFO(1200, 1180, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_725D_90[] = { /* 90 nm 1.60GHz Pentium M, VID #D */ FREQ_INFO(1600, 1276, INTEL_BUS_CLK), FREQ_INFO(1400, 1228, INTEL_BUS_CLK), FREQ_INFO(1200, 1164, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_715A_90[] = { /* 90 nm 1.50GHz Pentium M, VID #A */ FREQ_INFO(1500, 1340, INTEL_BUS_CLK), FREQ_INFO(1200, 1228, INTEL_BUS_CLK), FREQ_INFO(1000, 1148, INTEL_BUS_CLK), FREQ_INFO( 800, 1068, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_715B_90[] = { /* 90 nm 1.50GHz Pentium M, VID #B */ FREQ_INFO(1500, 1324, INTEL_BUS_CLK), FREQ_INFO(1200, 1212, INTEL_BUS_CLK), FREQ_INFO(1000, 1148, INTEL_BUS_CLK), FREQ_INFO( 800, 1068, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_715C_90[] = { /* 90 nm 1.50GHz Pentium M, VID #C */ FREQ_INFO(1500, 1308, INTEL_BUS_CLK), FREQ_INFO(1200, 1212, INTEL_BUS_CLK), FREQ_INFO(1000, 1132, INTEL_BUS_CLK), FREQ_INFO( 800, 1068, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_715D_90[] = { /* 90 nm 1.50GHz Pentium M, VID #D */ FREQ_INFO(1500, 1276, INTEL_BUS_CLK), FREQ_INFO(1200, 1180, INTEL_BUS_CLK), FREQ_INFO(1000, 1116, INTEL_BUS_CLK), FREQ_INFO( 800, 1052, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_778_90[] = { /* 90 nm 1.60GHz Low Voltage Pentium M */ FREQ_INFO(1600, 1116, INTEL_BUS_CLK), FREQ_INFO(1500, 1116, INTEL_BUS_CLK), FREQ_INFO(1400, 1100, INTEL_BUS_CLK), FREQ_INFO(1300, 1084, INTEL_BUS_CLK), FREQ_INFO(1200, 1068, INTEL_BUS_CLK), FREQ_INFO(1100, 1052, INTEL_BUS_CLK), FREQ_INFO(1000, 1052, INTEL_BUS_CLK), FREQ_INFO( 900, 1036, INTEL_BUS_CLK), FREQ_INFO( 800, 1020, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_758_90[] = { /* 90 nm 1.50GHz Low Voltage Pentium M */ FREQ_INFO(1500, 1116, INTEL_BUS_CLK), FREQ_INFO(1400, 1116, INTEL_BUS_CLK), FREQ_INFO(1300, 1100, INTEL_BUS_CLK), FREQ_INFO(1200, 1084, INTEL_BUS_CLK), FREQ_INFO(1100, 1068, INTEL_BUS_CLK), FREQ_INFO(1000, 1052, INTEL_BUS_CLK), FREQ_INFO( 900, 1036, INTEL_BUS_CLK), FREQ_INFO( 800, 1020, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_738_90[] = { /* 90 nm 1.40GHz Low Voltage Pentium M */ FREQ_INFO(1400, 1116, INTEL_BUS_CLK), FREQ_INFO(1300, 1116, INTEL_BUS_CLK), FREQ_INFO(1200, 1100, INTEL_BUS_CLK), FREQ_INFO(1100, 1068, INTEL_BUS_CLK), FREQ_INFO(1000, 1052, INTEL_BUS_CLK), FREQ_INFO( 900, 1036, INTEL_BUS_CLK), FREQ_INFO( 800, 1020, INTEL_BUS_CLK), FREQ_INFO( 600, 988, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_773G_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #G */ FREQ_INFO(1300, 956, INTEL_BUS_CLK), FREQ_INFO(1200, 940, INTEL_BUS_CLK), FREQ_INFO(1100, 924, INTEL_BUS_CLK), FREQ_INFO(1000, 908, INTEL_BUS_CLK), FREQ_INFO( 900, 876, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_773H_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #H */ FREQ_INFO(1300, 940, INTEL_BUS_CLK), FREQ_INFO(1200, 924, INTEL_BUS_CLK), FREQ_INFO(1100, 908, INTEL_BUS_CLK), FREQ_INFO(1000, 892, INTEL_BUS_CLK), FREQ_INFO( 900, 876, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_773I_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #I */ FREQ_INFO(1300, 924, INTEL_BUS_CLK), FREQ_INFO(1200, 908, INTEL_BUS_CLK), FREQ_INFO(1100, 892, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_773J_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #J */ FREQ_INFO(1300, 908, INTEL_BUS_CLK), FREQ_INFO(1200, 908, INTEL_BUS_CLK), FREQ_INFO(1100, 892, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_773K_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #K */ FREQ_INFO(1300, 892, INTEL_BUS_CLK), FREQ_INFO(1200, 892, INTEL_BUS_CLK), FREQ_INFO(1100, 876, INTEL_BUS_CLK), FREQ_INFO(1000, 860, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_773L_90[] = { /* 90 nm 1.30GHz Ultra Low Voltage Pentium M, VID #L */ FREQ_INFO(1300, 876, INTEL_BUS_CLK), FREQ_INFO(1200, 876, INTEL_BUS_CLK), FREQ_INFO(1100, 860, INTEL_BUS_CLK), FREQ_INFO(1000, 860, INTEL_BUS_CLK), FREQ_INFO( 900, 844, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753G_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #G */ FREQ_INFO(1200, 956, INTEL_BUS_CLK), FREQ_INFO(1100, 940, INTEL_BUS_CLK), FREQ_INFO(1000, 908, INTEL_BUS_CLK), FREQ_INFO( 900, 892, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753H_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #H */ FREQ_INFO(1200, 940, INTEL_BUS_CLK), FREQ_INFO(1100, 924, INTEL_BUS_CLK), FREQ_INFO(1000, 908, INTEL_BUS_CLK), FREQ_INFO( 900, 876, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753I_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #I */ FREQ_INFO(1200, 924, INTEL_BUS_CLK), FREQ_INFO(1100, 908, INTEL_BUS_CLK), FREQ_INFO(1000, 892, INTEL_BUS_CLK), FREQ_INFO( 900, 876, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753J_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #J */ FREQ_INFO(1200, 908, INTEL_BUS_CLK), FREQ_INFO(1100, 892, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753K_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #K */ FREQ_INFO(1200, 892, INTEL_BUS_CLK), FREQ_INFO(1100, 892, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_753L_90[] = { /* 90 nm 1.20GHz Ultra Low Voltage Pentium M, VID #L */ FREQ_INFO(1200, 876, INTEL_BUS_CLK), FREQ_INFO(1100, 876, INTEL_BUS_CLK), FREQ_INFO(1000, 860, INTEL_BUS_CLK), FREQ_INFO( 900, 844, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JG_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #G */ FREQ_INFO(1100, 956, INTEL_BUS_CLK), FREQ_INFO(1000, 940, INTEL_BUS_CLK), FREQ_INFO( 900, 908, INTEL_BUS_CLK), FREQ_INFO( 800, 876, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JH_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #H */ FREQ_INFO(1100, 940, INTEL_BUS_CLK), FREQ_INFO(1000, 924, INTEL_BUS_CLK), FREQ_INFO( 900, 892, INTEL_BUS_CLK), FREQ_INFO( 800, 876, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JI_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #I */ FREQ_INFO(1100, 924, INTEL_BUS_CLK), FREQ_INFO(1000, 908, INTEL_BUS_CLK), FREQ_INFO( 900, 892, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JJ_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #J */ FREQ_INFO(1100, 908, INTEL_BUS_CLK), FREQ_INFO(1000, 892, INTEL_BUS_CLK), FREQ_INFO( 900, 876, INTEL_BUS_CLK), FREQ_INFO( 800, 860, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JK_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #K */ FREQ_INFO(1100, 892, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733JL_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M, VID #L */ FREQ_INFO(1100, 876, INTEL_BUS_CLK), FREQ_INFO(1000, 876, INTEL_BUS_CLK), FREQ_INFO( 900, 860, INTEL_BUS_CLK), FREQ_INFO( 800, 844, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), }; static freq_info PM_733_90[] = { /* 90 nm 1.10GHz Ultra Low Voltage Pentium M */ FREQ_INFO(1100, 940, INTEL_BUS_CLK), FREQ_INFO(1000, 924, INTEL_BUS_CLK), FREQ_INFO( 900, 892, INTEL_BUS_CLK), FREQ_INFO( 800, 876, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; static freq_info PM_723_90[] = { /* 90 nm 1.00GHz Ultra Low Voltage Pentium M */ FREQ_INFO(1000, 940, INTEL_BUS_CLK), FREQ_INFO( 900, 908, INTEL_BUS_CLK), FREQ_INFO( 800, 876, INTEL_BUS_CLK), FREQ_INFO( 600, 812, INTEL_BUS_CLK), FREQ_INFO( 0, 0, 1), }; /* * VIA C7-M 500 MHz FSB, 400 MHz FSB, and ULV variants. * Data from the "VIA C7-M Processor BIOS Writer's Guide (v2.17)" datasheet. */ static freq_info C7M_795[] = { /* 2.00GHz Centaur C7-M 533 Mhz FSB */ FREQ_INFO_PWR(2000, 1148, 133, 20000), FREQ_INFO_PWR(1867, 1132, 133, 18000), FREQ_INFO_PWR(1600, 1100, 133, 15000), FREQ_INFO_PWR(1467, 1052, 133, 13000), FREQ_INFO_PWR(1200, 1004, 133, 10000), FREQ_INFO_PWR( 800, 844, 133, 7000), FREQ_INFO_PWR( 667, 844, 133, 6000), FREQ_INFO_PWR( 533, 844, 133, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_785[] = { /* 1.80GHz Centaur C7-M 533 Mhz FSB */ FREQ_INFO_PWR(1867, 1148, 133, 18000), FREQ_INFO_PWR(1600, 1100, 133, 15000), FREQ_INFO_PWR(1467, 1052, 133, 13000), FREQ_INFO_PWR(1200, 1004, 133, 10000), FREQ_INFO_PWR( 800, 844, 133, 7000), FREQ_INFO_PWR( 667, 844, 133, 6000), FREQ_INFO_PWR( 533, 844, 133, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_765[] = { /* 1.60GHz Centaur C7-M 533 Mhz FSB */ FREQ_INFO_PWR(1600, 1084, 133, 15000), FREQ_INFO_PWR(1467, 1052, 133, 13000), FREQ_INFO_PWR(1200, 1004, 133, 10000), FREQ_INFO_PWR( 800, 844, 133, 7000), FREQ_INFO_PWR( 667, 844, 133, 6000), FREQ_INFO_PWR( 533, 844, 133, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_794[] = { /* 2.00GHz Centaur C7-M 400 Mhz FSB */ FREQ_INFO_PWR(2000, 1148, 100, 20000), FREQ_INFO_PWR(1800, 1132, 100, 18000), FREQ_INFO_PWR(1600, 1100, 100, 15000), FREQ_INFO_PWR(1400, 1052, 100, 13000), FREQ_INFO_PWR(1000, 1004, 100, 10000), FREQ_INFO_PWR( 800, 844, 100, 7000), FREQ_INFO_PWR( 600, 844, 100, 6000), FREQ_INFO_PWR( 400, 844, 100, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_784[] = { /* 1.80GHz Centaur C7-M 400 Mhz FSB */ FREQ_INFO_PWR(1800, 1148, 100, 18000), FREQ_INFO_PWR(1600, 1100, 100, 15000), FREQ_INFO_PWR(1400, 1052, 100, 13000), FREQ_INFO_PWR(1000, 1004, 100, 10000), FREQ_INFO_PWR( 800, 844, 100, 7000), FREQ_INFO_PWR( 600, 844, 100, 6000), FREQ_INFO_PWR( 400, 844, 100, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_764[] = { /* 1.60GHz Centaur C7-M 400 Mhz FSB */ FREQ_INFO_PWR(1600, 1084, 100, 15000), FREQ_INFO_PWR(1400, 1052, 100, 13000), FREQ_INFO_PWR(1000, 1004, 100, 10000), FREQ_INFO_PWR( 800, 844, 100, 7000), FREQ_INFO_PWR( 600, 844, 100, 6000), FREQ_INFO_PWR( 400, 844, 100, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_754[] = { /* 1.50GHz Centaur C7-M 400 Mhz FSB */ FREQ_INFO_PWR(1500, 1004, 100, 12000), FREQ_INFO_PWR(1400, 988, 100, 11000), FREQ_INFO_PWR(1000, 940, 100, 9000), FREQ_INFO_PWR( 800, 844, 100, 7000), FREQ_INFO_PWR( 600, 844, 100, 6000), FREQ_INFO_PWR( 400, 844, 100, 5000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_771[] = { /* 1.20GHz Centaur C7-M 400 Mhz FSB */ FREQ_INFO_PWR(1200, 860, 100, 7000), FREQ_INFO_PWR(1000, 860, 100, 6000), FREQ_INFO_PWR( 800, 844, 100, 5500), FREQ_INFO_PWR( 600, 844, 100, 5000), FREQ_INFO_PWR( 400, 844, 100, 4000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_775_ULV[] = { /* 1.50GHz Centaur C7-M ULV */ FREQ_INFO_PWR(1500, 956, 100, 7500), FREQ_INFO_PWR(1400, 940, 100, 6000), FREQ_INFO_PWR(1000, 860, 100, 5000), FREQ_INFO_PWR( 800, 828, 100, 2800), FREQ_INFO_PWR( 600, 796, 100, 2500), FREQ_INFO_PWR( 400, 796, 100, 2000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_772_ULV[] = { /* 1.20GHz Centaur C7-M ULV */ FREQ_INFO_PWR(1200, 844, 100, 5000), FREQ_INFO_PWR(1000, 844, 100, 4000), FREQ_INFO_PWR( 800, 828, 100, 2800), FREQ_INFO_PWR( 600, 796, 100, 2500), FREQ_INFO_PWR( 400, 796, 100, 2000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_779_ULV[] = { /* 1.00GHz Centaur C7-M ULV */ FREQ_INFO_PWR(1000, 796, 100, 3500), FREQ_INFO_PWR( 800, 796, 100, 2800), FREQ_INFO_PWR( 600, 796, 100, 2500), FREQ_INFO_PWR( 400, 796, 100, 2000), FREQ_INFO(0, 0, 1), }; static freq_info C7M_770_ULV[] = { /* 1.00GHz Centaur C7-M ULV */ FREQ_INFO_PWR(1000, 844, 100, 5000), FREQ_INFO_PWR( 800, 796, 100, 2800), FREQ_INFO_PWR( 600, 796, 100, 2500), FREQ_INFO_PWR( 400, 796, 100, 2000), FREQ_INFO(0, 0, 1), }; static cpu_info ESTprocs[] = { INTEL(PM17_130, 1700, 1484, 600, 956, INTEL_BUS_CLK), INTEL(PM16_130, 1600, 1484, 600, 956, INTEL_BUS_CLK), INTEL(PM15_130, 1500, 1484, 600, 956, INTEL_BUS_CLK), INTEL(PM14_130, 1400, 1484, 600, 956, INTEL_BUS_CLK), INTEL(PM13_130, 1300, 1388, 600, 956, INTEL_BUS_CLK), INTEL(PM13_LV_130, 1300, 1180, 600, 956, INTEL_BUS_CLK), INTEL(PM12_LV_130, 1200, 1180, 600, 956, INTEL_BUS_CLK), INTEL(PM11_LV_130, 1100, 1180, 600, 956, INTEL_BUS_CLK), INTEL(PM11_ULV_130, 1100, 1004, 600, 844, INTEL_BUS_CLK), INTEL(PM10_ULV_130, 1000, 1004, 600, 844, INTEL_BUS_CLK), INTEL(PM_765A_90, 2100, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_765B_90, 2100, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_765C_90, 2100, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_765E_90, 2100, 1356, 600, 988, INTEL_BUS_CLK), INTEL(PM_755A_90, 2000, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_755B_90, 2000, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_755C_90, 2000, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_755D_90, 2000, 1276, 600, 988, INTEL_BUS_CLK), INTEL(PM_745A_90, 1800, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_745B_90, 1800, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_745C_90, 1800, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_745D_90, 1800, 1276, 600, 988, INTEL_BUS_CLK), INTEL(PM_735A_90, 1700, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_735B_90, 1700, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_735C_90, 1700, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_735D_90, 1700, 1276, 600, 988, INTEL_BUS_CLK), INTEL(PM_725A_90, 1600, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_725B_90, 1600, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_725C_90, 1600, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_725D_90, 1600, 1276, 600, 988, INTEL_BUS_CLK), INTEL(PM_715A_90, 1500, 1340, 600, 988, INTEL_BUS_CLK), INTEL(PM_715B_90, 1500, 1324, 600, 988, INTEL_BUS_CLK), INTEL(PM_715C_90, 1500, 1308, 600, 988, INTEL_BUS_CLK), INTEL(PM_715D_90, 1500, 1276, 600, 988, INTEL_BUS_CLK), INTEL(PM_778_90, 1600, 1116, 600, 988, INTEL_BUS_CLK), INTEL(PM_758_90, 1500, 1116, 600, 988, INTEL_BUS_CLK), INTEL(PM_738_90, 1400, 1116, 600, 988, INTEL_BUS_CLK), INTEL(PM_773G_90, 1300, 956, 600, 812, INTEL_BUS_CLK), INTEL(PM_773H_90, 1300, 940, 600, 812, INTEL_BUS_CLK), INTEL(PM_773I_90, 1300, 924, 600, 812, INTEL_BUS_CLK), INTEL(PM_773J_90, 1300, 908, 600, 812, INTEL_BUS_CLK), INTEL(PM_773K_90, 1300, 892, 600, 812, INTEL_BUS_CLK), INTEL(PM_773L_90, 1300, 876, 600, 812, INTEL_BUS_CLK), INTEL(PM_753G_90, 1200, 956, 600, 812, INTEL_BUS_CLK), INTEL(PM_753H_90, 1200, 940, 600, 812, INTEL_BUS_CLK), INTEL(PM_753I_90, 1200, 924, 600, 812, INTEL_BUS_CLK), INTEL(PM_753J_90, 1200, 908, 600, 812, INTEL_BUS_CLK), INTEL(PM_753K_90, 1200, 892, 600, 812, INTEL_BUS_CLK), INTEL(PM_753L_90, 1200, 876, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JG_90, 1100, 956, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JH_90, 1100, 940, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JI_90, 1100, 924, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JJ_90, 1100, 908, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JK_90, 1100, 892, 600, 812, INTEL_BUS_CLK), INTEL(PM_733JL_90, 1100, 876, 600, 812, INTEL_BUS_CLK), INTEL(PM_733_90, 1100, 940, 600, 812, INTEL_BUS_CLK), INTEL(PM_723_90, 1000, 940, 600, 812, INTEL_BUS_CLK), CENTAUR(C7M_795, 2000, 1148, 533, 844, 133), CENTAUR(C7M_794, 2000, 1148, 400, 844, 100), CENTAUR(C7M_785, 1867, 1148, 533, 844, 133), CENTAUR(C7M_784, 1800, 1148, 400, 844, 100), CENTAUR(C7M_765, 1600, 1084, 533, 844, 133), CENTAUR(C7M_764, 1600, 1084, 400, 844, 100), CENTAUR(C7M_754, 1500, 1004, 400, 844, 100), CENTAUR(C7M_775_ULV, 1500, 956, 400, 796, 100), CENTAUR(C7M_771, 1200, 860, 400, 844, 100), CENTAUR(C7M_772_ULV, 1200, 844, 400, 796, 100), CENTAUR(C7M_779_ULV, 1000, 796, 400, 796, 100), CENTAUR(C7M_770_ULV, 1000, 844, 400, 796, 100), { 0, 0, NULL }, }; static void est_identify(driver_t *driver, device_t parent); static int est_features(driver_t *driver, u_int *features); static int est_probe(device_t parent); static int est_attach(device_t parent); static int est_detach(device_t parent); static int est_get_info(device_t dev); static int est_acpi_info(device_t dev, freq_info **freqs); static int est_table_info(device_t dev, uint64_t msr, freq_info **freqs); static int est_msr_info(device_t dev, uint64_t msr, freq_info **freqs); static freq_info *est_get_current(freq_info *freq_list); static int est_settings(device_t dev, struct cf_setting *sets, int *count); static int est_set(device_t dev, const struct cf_setting *set); static int est_get(device_t dev, struct cf_setting *set); static int est_type(device_t dev, int *type); static int est_set_id16(device_t dev, uint16_t id16, int need_check); static void est_get_id16(uint16_t *id16_p); static device_method_t est_methods[] = { /* Device interface */ DEVMETHOD(device_identify, est_identify), DEVMETHOD(device_probe, est_probe), DEVMETHOD(device_attach, est_attach), DEVMETHOD(device_detach, est_detach), /* cpufreq interface */ DEVMETHOD(cpufreq_drv_set, est_set), DEVMETHOD(cpufreq_drv_get, est_get), DEVMETHOD(cpufreq_drv_type, est_type), DEVMETHOD(cpufreq_drv_settings, est_settings), /* ACPI interface */ DEVMETHOD(acpi_get_features, est_features), {0, 0} }; static driver_t est_driver = { "est", est_methods, sizeof(struct est_softc), }; static devclass_t est_devclass; DRIVER_MODULE(est, cpu, est_driver, est_devclass, 0, 0); static int est_features(driver_t *driver, u_int *features) { /* * Notify the ACPI CPU that we support direct access to MSRs. * XXX C1 "I/O then Halt" seems necessary for some broken BIOS. */ *features = ACPI_CAP_PERF_MSRS | ACPI_CAP_C1_IO_HALT; return (0); } static void est_identify(driver_t *driver, device_t parent) { device_t child; /* Make sure we're not being doubly invoked. */ if (device_find_child(parent, "est", -1) != NULL) return; /* Check that CPUID is supported and the vendor is Intel.*/ if (cpu_high == 0 || (cpu_vendor_id != CPU_VENDOR_INTEL && cpu_vendor_id != CPU_VENDOR_CENTAUR)) return; /* * Check if the CPU supports EST. */ if (!(cpu_feature2 & CPUID2_EST)) return; /* * We add a child for each CPU since settings must be performed * on each CPU in the SMP case. */ child = BUS_ADD_CHILD(parent, 10, "est", -1); if (child == NULL) device_printf(parent, "add est child failed\n"); } static int est_probe(device_t dev) { device_t perf_dev; uint64_t msr; int error, type; if (resource_disabled("est", 0)) return (ENXIO); /* * If the ACPI perf driver has attached and is not just offering * info, let it manage things. */ perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1); if (perf_dev && device_is_attached(perf_dev)) { error = CPUFREQ_DRV_TYPE(perf_dev, &type); if (error == 0 && (type & CPUFREQ_FLAG_INFO_ONLY) == 0) return (ENXIO); } /* Attempt to enable SpeedStep if not currently enabled. */ msr = rdmsr(MSR_MISC_ENABLE); if ((msr & MSR_SS_ENABLE) == 0) { wrmsr(MSR_MISC_ENABLE, msr | MSR_SS_ENABLE); if (bootverbose) device_printf(dev, "enabling SpeedStep\n"); /* Check if the enable failed. */ msr = rdmsr(MSR_MISC_ENABLE); if ((msr & MSR_SS_ENABLE) == 0) { device_printf(dev, "failed to enable SpeedStep\n"); return (ENXIO); } } device_set_desc(dev, "Enhanced SpeedStep Frequency Control"); return (0); } static int est_attach(device_t dev) { struct est_softc *sc; sc = device_get_softc(dev); sc->dev = dev; /* On SMP system we can't guarantie independent freq setting. */ if (strict == -1 && mp_ncpus > 1) strict = 0; /* Check CPU for supported settings. */ if (est_get_info(dev)) return (ENXIO); cpufreq_register(dev); return (0); } static int est_detach(device_t dev) { struct est_softc *sc; int error; error = cpufreq_unregister(dev); if (error) return (error); sc = device_get_softc(dev); if (sc->acpi_settings || sc->msr_settings) free(sc->freq_list, M_DEVBUF); return (0); } /* * Probe for supported CPU settings. First, check our static table of * settings. If no match, try using the ones offered by acpi_perf * (i.e., _PSS). We use ACPI second because some systems (IBM R/T40 * series) export both legacy SMM IO-based access and direct MSR access * but the direct access specifies invalid values for _PSS. */ static int est_get_info(device_t dev) { struct est_softc *sc; uint64_t msr; int error; sc = device_get_softc(dev); msr = rdmsr(MSR_PERF_STATUS); error = est_table_info(dev, msr, &sc->freq_list); if (error) error = est_acpi_info(dev, &sc->freq_list); if (error) error = est_msr_info(dev, msr, &sc->freq_list); if (error) { printf( "est: CPU supports Enhanced Speedstep, but is not recognized.\n" "est: cpu_vendor %s, msr %0jx\n", cpu_vendor, msr); return (ENXIO); } return (0); } static int est_acpi_info(device_t dev, freq_info **freqs) { struct est_softc *sc; struct cf_setting *sets; freq_info *table; device_t perf_dev; int count, error, i, j; uint16_t saved_id16; perf_dev = device_find_child(device_get_parent(dev), "acpi_perf", -1); if (perf_dev == NULL || !device_is_attached(perf_dev)) return (ENXIO); /* Fetch settings from acpi_perf. */ sc = device_get_softc(dev); table = NULL; sets = malloc(MAX_SETTINGS * sizeof(*sets), M_TEMP, M_NOWAIT); if (sets == NULL) return (ENOMEM); count = MAX_SETTINGS; error = CPUFREQ_DRV_SETTINGS(perf_dev, sets, &count); if (error) goto out; /* Parse settings into our local table format. */ table = malloc((count + 1) * sizeof(freq_info), M_DEVBUF, M_NOWAIT); if (table == NULL) { error = ENOMEM; goto out; } est_get_id16(&saved_id16); for (i = 0, j = 0; i < count; i++) { /* * Confirm id16 value is correct. */ if (sets[i].freq > 0) { error = est_set_id16(dev, sets[i].spec[0], strict); if (error != 0) { if (bootverbose) device_printf(dev, "Invalid freq %u, " "ignored.\n", sets[i].freq); continue; } table[j].freq = sets[i].freq; table[j].volts = sets[i].volts; table[j].id16 = sets[i].spec[0]; table[j].power = sets[i].power; ++j; } } /* restore saved setting */ est_set_id16(dev, saved_id16, 0); /* Mark end of table with a terminator. */ bzero(&table[j], sizeof(freq_info)); sc->acpi_settings = TRUE; *freqs = table; error = 0; out: if (sets) free(sets, M_TEMP); if (error && table) free(table, M_DEVBUF); return (error); } static int est_table_info(device_t dev, uint64_t msr, freq_info **freqs) { cpu_info *p; uint32_t id; /* Find a table which matches (vendor, id32). */ id = msr >> 32; for (p = ESTprocs; p->id32 != 0; p++) { if (p->vendor_id == cpu_vendor_id && p->id32 == id) break; } if (p->id32 == 0) return (EOPNOTSUPP); /* Make sure the current setpoint is valid. */ if (est_get_current(p->freqtab) == NULL) { device_printf(dev, "current setting not found in table\n"); return (EOPNOTSUPP); } *freqs = p->freqtab; return (0); } static int bus_speed_ok(int bus) { switch (bus) { case 100: case 133: case 333: return (1); default: return (0); } } /* * Flesh out a simple rate table containing the high and low frequencies * based on the current clock speed and the upper 32 bits of the MSR. */ static int est_msr_info(device_t dev, uint64_t msr, freq_info **freqs) { struct est_softc *sc; freq_info *fp; int bus, freq, volts; uint16_t id; if (!msr_info_enabled) return (EOPNOTSUPP); /* Figure out the bus clock. */ freq = atomic_load_acq_64(&tsc_freq) / 1000000; id = msr >> 32; bus = freq / (id >> 8); device_printf(dev, "Guessed bus clock (high) of %d MHz\n", bus); if (!bus_speed_ok(bus)) { /* We may be running on the low frequency. */ id = msr >> 48; bus = freq / (id >> 8); device_printf(dev, "Guessed bus clock (low) of %d MHz\n", bus); if (!bus_speed_ok(bus)) return (EOPNOTSUPP); /* Calculate high frequency. */ id = msr >> 32; freq = ((id >> 8) & 0xff) * bus; } /* Fill out a new freq table containing just the high and low freqs. */ sc = device_get_softc(dev); fp = malloc(sizeof(freq_info) * 3, M_DEVBUF, M_WAITOK | M_ZERO); /* First, the high frequency. */ volts = id & 0xff; if (volts != 0) { volts <<= 4; volts += 700; } fp[0].freq = freq; fp[0].volts = volts; fp[0].id16 = id; fp[0].power = CPUFREQ_VAL_UNKNOWN; device_printf(dev, "Guessed high setting of %d MHz @ %d Mv\n", freq, volts); /* Second, the low frequency. */ id = msr >> 48; freq = ((id >> 8) & 0xff) * bus; volts = id & 0xff; if (volts != 0) { volts <<= 4; volts += 700; } fp[1].freq = freq; fp[1].volts = volts; fp[1].id16 = id; fp[1].power = CPUFREQ_VAL_UNKNOWN; device_printf(dev, "Guessed low setting of %d MHz @ %d Mv\n", freq, volts); /* Table is already terminated due to M_ZERO. */ sc->msr_settings = TRUE; *freqs = fp; return (0); } static void est_get_id16(uint16_t *id16_p) { *id16_p = rdmsr(MSR_PERF_STATUS) & 0xffff; } static int est_set_id16(device_t dev, uint16_t id16, int need_check) { uint64_t msr; uint16_t new_id16; int ret = 0; /* Read the current register, mask out the old, set the new id. */ msr = rdmsr(MSR_PERF_CTL); msr = (msr & ~0xffff) | id16; wrmsr(MSR_PERF_CTL, msr); /* Wait a short while for the new setting. XXX Is this necessary? */ DELAY(EST_TRANS_LAT); if (need_check) { est_get_id16(&new_id16); if (new_id16 != id16) { if (bootverbose) device_printf(dev, "Invalid id16 (set, cur) " "= (%u, %u)\n", id16, new_id16); ret = ENXIO; } } return (ret); } static freq_info * est_get_current(freq_info *freq_list) { freq_info *f; int i; uint16_t id16; /* * Try a few times to get a valid value. Sometimes, if the CPU * is in the middle of an asynchronous transition (i.e., P4TCC), * we get a temporary invalid result. */ for (i = 0; i < 5; i++) { est_get_id16(&id16); for (f = freq_list; f->id16 != 0; f++) { if (f->id16 == id16) return (f); } DELAY(100); } return (NULL); } static int est_settings(device_t dev, struct cf_setting *sets, int *count) { struct est_softc *sc; freq_info *f; int i; sc = device_get_softc(dev); if (*count < EST_MAX_SETTINGS) return (E2BIG); i = 0; for (f = sc->freq_list; f->freq != 0; f++, i++) { sets[i].freq = f->freq; sets[i].volts = f->volts; sets[i].power = f->power; sets[i].lat = EST_TRANS_LAT; sets[i].dev = dev; } *count = i; return (0); } static int est_set(device_t dev, const struct cf_setting *set) { struct est_softc *sc; freq_info *f; /* Find the setting matching the requested one. */ sc = device_get_softc(dev); for (f = sc->freq_list; f->freq != 0; f++) { if (f->freq == set->freq) break; } if (f->freq == 0) return (EINVAL); /* Read the current register, mask out the old, set the new id. */ est_set_id16(dev, f->id16, 0); return (0); } static int est_get(device_t dev, struct cf_setting *set) { struct est_softc *sc; freq_info *f; sc = device_get_softc(dev); f = est_get_current(sc->freq_list); if (f == NULL) return (ENXIO); set->freq = f->freq; set->volts = f->volts; set->power = f->power; set->lat = EST_TRANS_LAT; set->dev = dev; return (0); } static int est_type(device_t dev, int *type) { if (type == NULL) return (EINVAL); *type = CPUFREQ_TYPE_ABSOLUTE; return (0); }