| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_virstor/@/dev/usb/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/geom/geom_virstor/@/dev/usb/usb_compat_linux.c |
/* $FreeBSD: release/9.1.0/sys/dev/usb/usb_compat_linux.c 235000 2012-05-04 15:05:30Z hselasky $ */
/*-
* Copyright (c) 2007 Luigi Rizzo - Universita` di Pisa. All rights reserved.
* Copyright (c) 2007 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <dev/usb/usb.h>
#include <dev/usb/usb_ioctl.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#define USB_DEBUG_VAR usb_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_compat_linux.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_hub.h>
#include <dev/usb/usb_request.h>
#include <dev/usb/usb_debug.h>
struct usb_linux_softc {
LIST_ENTRY(usb_linux_softc) sc_attached_list;
device_t sc_fbsd_dev;
struct usb_device *sc_fbsd_udev;
struct usb_interface *sc_ui;
struct usb_driver *sc_udrv;
};
/* prototypes */
static device_probe_t usb_linux_probe;
static device_attach_t usb_linux_attach;
static device_detach_t usb_linux_detach;
static device_suspend_t usb_linux_suspend;
static device_resume_t usb_linux_resume;
static usb_callback_t usb_linux_isoc_callback;
static usb_callback_t usb_linux_non_isoc_callback;
static usb_complete_t usb_linux_wait_complete;
static uint16_t usb_max_isoc_frames(struct usb_device *);
static int usb_start_wait_urb(struct urb *, usb_timeout_t, uint16_t *);
static const struct usb_device_id *usb_linux_lookup_id(
const struct usb_device_id *, struct usb_attach_arg *);
static struct usb_driver *usb_linux_get_usb_driver(struct usb_linux_softc *);
static int usb_linux_create_usb_device(struct usb_device *, device_t);
static void usb_linux_cleanup_interface(struct usb_device *,
struct usb_interface *);
static void usb_linux_complete(struct usb_xfer *);
static int usb_unlink_urb_sub(struct urb *, uint8_t);
/*------------------------------------------------------------------------*
* FreeBSD USB interface
*------------------------------------------------------------------------*/
static LIST_HEAD(, usb_linux_softc) usb_linux_attached_list;
static LIST_HEAD(, usb_driver) usb_linux_driver_list;
static device_method_t usb_linux_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, usb_linux_probe),
DEVMETHOD(device_attach, usb_linux_attach),
DEVMETHOD(device_detach, usb_linux_detach),
DEVMETHOD(device_suspend, usb_linux_suspend),
DEVMETHOD(device_resume, usb_linux_resume),
{0, 0}
};
static driver_t usb_linux_driver = {
.name = "usb_linux",
.methods = usb_linux_methods,
.size = sizeof(struct usb_linux_softc),
};
static devclass_t usb_linux_devclass;
DRIVER_MODULE(usb_linux, uhub, usb_linux_driver, usb_linux_devclass, NULL, 0);
MODULE_VERSION(usb_linux, 1);
/*------------------------------------------------------------------------*
* usb_linux_lookup_id
*
* This functions takes an array of "struct usb_device_id" and tries
* to match the entries with the information in "struct usb_attach_arg".
* If it finds a match the matching entry will be returned.
* Else "NULL" will be returned.
*------------------------------------------------------------------------*/
static const struct usb_device_id *
usb_linux_lookup_id(const struct usb_device_id *id, struct usb_attach_arg *uaa)
{
if (id == NULL) {
goto done;
}
/*
* Keep on matching array entries until we find one with
* "match_flags" equal to zero, which indicates the end of the
* array:
*/
for (; id->match_flags; id++) {
if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
(id->idVendor != uaa->info.idVendor)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
(id->idProduct != uaa->info.idProduct)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
(id->bcdDevice_lo > uaa->info.bcdDevice)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
(id->bcdDevice_hi < uaa->info.bcdDevice)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
(id->bDeviceClass != uaa->info.bDeviceClass)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
(id->bDeviceSubClass != uaa->info.bDeviceSubClass)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
(id->bDeviceProtocol != uaa->info.bDeviceProtocol)) {
continue;
}
if ((uaa->info.bDeviceClass == 0xFF) &&
!(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
(id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
USB_DEVICE_ID_MATCH_INT_SUBCLASS |
USB_DEVICE_ID_MATCH_INT_PROTOCOL))) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
(id->bInterfaceClass != uaa->info.bInterfaceClass)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_SUBCLASS) &&
(id->bInterfaceSubClass != uaa->info.bInterfaceSubClass)) {
continue;
}
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_PROTOCOL) &&
(id->bInterfaceProtocol != uaa->info.bInterfaceProtocol)) {
continue;
}
/* we found a match! */
return (id);
}
done:
return (NULL);
}
/*------------------------------------------------------------------------*
* usb_linux_probe
*
* This function is the FreeBSD probe callback. It is called from the
* FreeBSD USB stack through the "device_probe_and_attach()" function.
*------------------------------------------------------------------------*/
static int
usb_linux_probe(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct usb_driver *udrv;
int err = ENXIO;
if (uaa->usb_mode != USB_MODE_HOST) {
return (ENXIO);
}
mtx_lock(&Giant);
LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
if (usb_linux_lookup_id(udrv->id_table, uaa)) {
err = 0;
break;
}
}
mtx_unlock(&Giant);
return (err);
}
/*------------------------------------------------------------------------*
* usb_linux_get_usb_driver
*
* This function returns the pointer to the "struct usb_driver" where
* the Linux USB device driver "struct usb_device_id" match was found.
* We apply a lock before reading out the pointer to avoid races.
*------------------------------------------------------------------------*/
static struct usb_driver *
usb_linux_get_usb_driver(struct usb_linux_softc *sc)
{
struct usb_driver *udrv;
mtx_lock(&Giant);
udrv = sc->sc_udrv;
mtx_unlock(&Giant);
return (udrv);
}
/*------------------------------------------------------------------------*
* usb_linux_attach
*
* This function is the FreeBSD attach callback. It is called from the
* FreeBSD USB stack through the "device_probe_and_attach()" function.
* This function is called when "usb_linux_probe()" returns zero.
*------------------------------------------------------------------------*/
static int
usb_linux_attach(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct usb_linux_softc *sc = device_get_softc(dev);
struct usb_driver *udrv;
const struct usb_device_id *id = NULL;
mtx_lock(&Giant);
LIST_FOREACH(udrv, &usb_linux_driver_list, linux_driver_list) {
id = usb_linux_lookup_id(udrv->id_table, uaa);
if (id)
break;
}
mtx_unlock(&Giant);
if (id == NULL) {
return (ENXIO);
}
if (usb_linux_create_usb_device(uaa->device, dev) != 0)
return (ENOMEM);
device_set_usb_desc(dev);
sc->sc_fbsd_udev = uaa->device;
sc->sc_fbsd_dev = dev;
sc->sc_udrv = udrv;
sc->sc_ui = usb_ifnum_to_if(uaa->device, uaa->info.bIfaceNum);
if (sc->sc_ui == NULL) {
return (EINVAL);
}
if (udrv->probe) {
if ((udrv->probe) (sc->sc_ui, id)) {
return (ENXIO);
}
}
mtx_lock(&Giant);
LIST_INSERT_HEAD(&usb_linux_attached_list, sc, sc_attached_list);
mtx_unlock(&Giant);
/* success */
return (0);
}
/*------------------------------------------------------------------------*
* usb_linux_detach
*
* This function is the FreeBSD detach callback. It is called from the
* FreeBSD USB stack through the "device_detach()" function.
*------------------------------------------------------------------------*/
static int
usb_linux_detach(device_t dev)
{
struct usb_linux_softc *sc = device_get_softc(dev);
struct usb_driver *udrv = NULL;
mtx_lock(&Giant);
if (sc->sc_attached_list.le_prev) {
LIST_REMOVE(sc, sc_attached_list);
sc->sc_attached_list.le_prev = NULL;
udrv = sc->sc_udrv;
sc->sc_udrv = NULL;
}
mtx_unlock(&Giant);
if (udrv && udrv->disconnect) {
(udrv->disconnect) (sc->sc_ui);
}
/*
* Make sure that we free all FreeBSD USB transfers belonging to
* this Linux "usb_interface", hence they will most likely not be
* needed any more.
*/
usb_linux_cleanup_interface(sc->sc_fbsd_udev, sc->sc_ui);
return (0);
}
/*------------------------------------------------------------------------*
* usb_linux_suspend
*
* This function is the FreeBSD suspend callback. Usually it does nothing.
*------------------------------------------------------------------------*/
static int
usb_linux_suspend(device_t dev)
{
struct usb_linux_softc *sc = device_get_softc(dev);
struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
int err;
if (udrv && udrv->suspend) {
err = (udrv->suspend) (sc->sc_ui, 0);
}
return (0);
}
/*------------------------------------------------------------------------*
* usb_linux_resume
*
* This function is the FreeBSD resume callback. Usually it does nothing.
*------------------------------------------------------------------------*/
static int
usb_linux_resume(device_t dev)
{
struct usb_linux_softc *sc = device_get_softc(dev);
struct usb_driver *udrv = usb_linux_get_usb_driver(sc);
int err;
if (udrv && udrv->resume) {
err = (udrv->resume) (sc->sc_ui);
}
return (0);
}
/*------------------------------------------------------------------------*
* Linux emulation layer
*------------------------------------------------------------------------*/
/*------------------------------------------------------------------------*
* usb_max_isoc_frames
*
* The following function returns the maximum number of isochronous
* frames that we support per URB. It is not part of the Linux USB API.
*------------------------------------------------------------------------*/
static uint16_t
usb_max_isoc_frames(struct usb_device *dev)
{
; /* indent fix */
switch (usbd_get_speed(dev)) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
return (USB_MAX_FULL_SPEED_ISOC_FRAMES);
default:
return (USB_MAX_HIGH_SPEED_ISOC_FRAMES);
}
}
/*------------------------------------------------------------------------*
* usb_submit_urb
*
* This function is used to queue an URB after that it has been
* initialized. If it returns non-zero, it means that the URB was not
* queued.
*------------------------------------------------------------------------*/
int
usb_submit_urb(struct urb *urb, uint16_t mem_flags)
{
struct usb_host_endpoint *uhe;
uint8_t do_unlock;
int err;
if (urb == NULL)
return (-EINVAL);
do_unlock = mtx_owned(&Giant) ? 0 : 1;
if (do_unlock)
mtx_lock(&Giant);
if (urb->endpoint == NULL) {
err = -EINVAL;
goto done;
}
/*
* Check to see if the urb is in the process of being killed
* and stop a urb that is in the process of being killed from
* being re-submitted (e.g. from its completion callback
* function).
*/
if (urb->kill_count != 0) {
err = -EPERM;
goto done;
}
uhe = urb->endpoint;
/*
* Check that we have got a FreeBSD USB transfer that will dequeue
* the URB structure and do the real transfer. If there are no USB
* transfers, then we return an error.
*/
if (uhe->bsd_xfer[0] ||
uhe->bsd_xfer[1]) {
/* we are ready! */
TAILQ_INSERT_TAIL(&uhe->bsd_urb_list, urb, bsd_urb_list);
urb->status = -EINPROGRESS;
usbd_transfer_start(uhe->bsd_xfer[0]);
usbd_transfer_start(uhe->bsd_xfer[1]);
err = 0;
} else {
/* no pipes have been setup yet! */
urb->status = -EINVAL;
err = -EINVAL;
}
done:
if (do_unlock)
mtx_unlock(&Giant);
return (err);
}
/*------------------------------------------------------------------------*
* usb_unlink_urb
*
* This function is used to stop an URB after that it is been
* submitted, but before the "complete" callback has been called. On
*------------------------------------------------------------------------*/
int
usb_unlink_urb(struct urb *urb)
{
return (usb_unlink_urb_sub(urb, 0));
}
static void
usb_unlink_bsd(struct usb_xfer *xfer,
struct urb *urb, uint8_t drain)
{
if (xfer == NULL)
return;
if (!usbd_transfer_pending(xfer))
return;
if (xfer->priv_fifo == (void *)urb) {
if (drain) {
mtx_unlock(&Giant);
usbd_transfer_drain(xfer);
mtx_lock(&Giant);
} else {
usbd_transfer_stop(xfer);
}
usbd_transfer_start(xfer);
}
}
static int
usb_unlink_urb_sub(struct urb *urb, uint8_t drain)
{
struct usb_host_endpoint *uhe;
uint16_t x;
uint8_t do_unlock;
int err;
if (urb == NULL)
return (-EINVAL);
do_unlock = mtx_owned(&Giant) ? 0 : 1;
if (do_unlock)
mtx_lock(&Giant);
if (drain)
urb->kill_count++;
if (urb->endpoint == NULL) {
err = -EINVAL;
goto done;
}
uhe = urb->endpoint;
if (urb->bsd_urb_list.tqe_prev) {
/* not started yet, just remove it from the queue */
TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
urb->bsd_urb_list.tqe_prev = NULL;
urb->status = -ECONNRESET;
urb->actual_length = 0;
for (x = 0; x < urb->number_of_packets; x++) {
urb->iso_frame_desc[x].actual_length = 0;
}
if (urb->complete) {
(urb->complete) (urb);
}
} else {
/*
* If the URB is not on the URB list, then check if one of
* the FreeBSD USB transfer are processing the current URB.
* If so, re-start that transfer, which will lead to the
* termination of that URB:
*/
usb_unlink_bsd(uhe->bsd_xfer[0], urb, drain);
usb_unlink_bsd(uhe->bsd_xfer[1], urb, drain);
}
err = 0;
done:
if (drain)
urb->kill_count--;
if (do_unlock)
mtx_unlock(&Giant);
return (err);
}
/*------------------------------------------------------------------------*
* usb_clear_halt
*
* This function must always be used to clear the stall. Stall is when
* an USB endpoint returns a stall message to the USB host controller.
* Until the stall is cleared, no data can be transferred.
*------------------------------------------------------------------------*/
int
usb_clear_halt(struct usb_device *dev, struct usb_host_endpoint *uhe)
{
struct usb_config cfg[1];
struct usb_endpoint *ep;
uint8_t type;
uint8_t addr;
if (uhe == NULL)
return (-EINVAL);
type = uhe->desc.bmAttributes & UE_XFERTYPE;
addr = uhe->desc.bEndpointAddress;
memset(cfg, 0, sizeof(cfg));
cfg[0].type = type;
cfg[0].endpoint = addr & UE_ADDR;
cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
ep = usbd_get_endpoint(dev, uhe->bsd_iface_index, cfg);
if (ep == NULL)
return (-EINVAL);
usbd_clear_data_toggle(dev, ep);
return (usb_control_msg(dev, &dev->ep0,
UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT,
UF_ENDPOINT_HALT, addr, NULL, 0, 1000));
}
/*------------------------------------------------------------------------*
* usb_start_wait_urb
*
* This is an internal function that is used to perform synchronous
* Linux USB transfers.
*------------------------------------------------------------------------*/
static int
usb_start_wait_urb(struct urb *urb, usb_timeout_t timeout, uint16_t *p_actlen)
{
int err;
uint8_t do_unlock;
/* you must have a timeout! */
if (timeout == 0) {
timeout = 1;
}
urb->complete = &usb_linux_wait_complete;
urb->timeout = timeout;
urb->transfer_flags |= URB_WAIT_WAKEUP;
urb->transfer_flags &= ~URB_IS_SLEEPING;
do_unlock = mtx_owned(&Giant) ? 0 : 1;
if (do_unlock)
mtx_lock(&Giant);
err = usb_submit_urb(urb, 0);
if (err)
goto done;
/*
* the URB might have completed before we get here, so check that by
* using some flags!
*/
while (urb->transfer_flags & URB_WAIT_WAKEUP) {
urb->transfer_flags |= URB_IS_SLEEPING;
cv_wait(&urb->cv_wait, &Giant);
urb->transfer_flags &= ~URB_IS_SLEEPING;
}
err = urb->status;
done:
if (do_unlock)
mtx_unlock(&Giant);
if (p_actlen != NULL) {
if (err)
*p_actlen = 0;
else
*p_actlen = urb->actual_length;
}
return (err);
}
/*------------------------------------------------------------------------*
* usb_control_msg
*
* The following function performs a control transfer sequence one any
* control, bulk or interrupt endpoint, specified by "uhe". A control
* transfer means that you transfer an 8-byte header first followed by
* a data-phase as indicated by the 8-byte header. The "timeout" is
* given in milliseconds.
*
* Return values:
* 0: Success
* < 0: Failure
* > 0: Acutal length
*------------------------------------------------------------------------*/
int
usb_control_msg(struct usb_device *dev, struct usb_host_endpoint *uhe,
uint8_t request, uint8_t requesttype,
uint16_t value, uint16_t index, void *data,
uint16_t size, usb_timeout_t timeout)
{
struct usb_device_request req;
struct urb *urb;
int err;
uint16_t actlen;
uint8_t type;
uint8_t addr;
req.bmRequestType = requesttype;
req.bRequest = request;
USETW(req.wValue, value);
USETW(req.wIndex, index);
USETW(req.wLength, size);
if (uhe == NULL) {
return (-EINVAL);
}
type = (uhe->desc.bmAttributes & UE_XFERTYPE);
addr = (uhe->desc.bEndpointAddress & UE_ADDR);
if (type != UE_CONTROL) {
return (-EINVAL);
}
if (addr == 0) {
/*
* The FreeBSD USB stack supports standard control
* transfers on control endpoint zero:
*/
err = usbd_do_request_flags(dev,
NULL, &req, data, USB_SHORT_XFER_OK,
&actlen, timeout);
if (err) {
err = -EPIPE;
} else {
err = actlen;
}
return (err);
}
if (dev->flags.usb_mode != USB_MODE_HOST) {
/* not supported */
return (-EINVAL);
}
err = usb_setup_endpoint(dev, uhe, 1 /* dummy */ );
/*
* NOTE: we need to allocate real memory here so that we don't
* transfer data to/from the stack!
*
* 0xFFFF is a FreeBSD specific magic value.
*/
urb = usb_alloc_urb(0xFFFF, size);
if (urb == NULL)
return (-ENOMEM);
urb->dev = dev;
urb->endpoint = uhe;
memcpy(urb->setup_packet, &req, sizeof(req));
if (size && (!(req.bmRequestType & UT_READ))) {
/* move the data to a real buffer */
memcpy(USB_ADD_BYTES(urb->setup_packet, sizeof(req)),
data, size);
}
err = usb_start_wait_urb(urb, timeout, &actlen);
if (req.bmRequestType & UT_READ) {
if (actlen) {
bcopy(USB_ADD_BYTES(urb->setup_packet,
sizeof(req)), data, actlen);
}
}
usb_free_urb(urb);
if (err == 0) {
err = actlen;
}
return (err);
}
/*------------------------------------------------------------------------*
* usb_set_interface
*
* The following function will select which alternate setting of an
* USB interface you plan to use. By default alternate setting with
* index zero is selected. Note that "iface_no" is not the interface
* index, but rather the value of "bInterfaceNumber".
*------------------------------------------------------------------------*/
int
usb_set_interface(struct usb_device *dev, uint8_t iface_no, uint8_t alt_index)
{
struct usb_interface *p_ui = usb_ifnum_to_if(dev, iface_no);
int err;
if (p_ui == NULL)
return (-EINVAL);
if (alt_index >= p_ui->num_altsetting)
return (-EINVAL);
usb_linux_cleanup_interface(dev, p_ui);
err = -usbd_set_alt_interface_index(dev,
p_ui->bsd_iface_index, alt_index);
if (err == 0) {
p_ui->cur_altsetting = p_ui->altsetting + alt_index;
}
return (err);
}
/*------------------------------------------------------------------------*
* usb_setup_endpoint
*
* The following function is an extension to the Linux USB API that
* allows you to set a maximum buffer size for a given USB endpoint.
* The maximum buffer size is per URB. If you don't call this function
* to set a maximum buffer size, the endpoint will not be functional.
* Note that for isochronous endpoints the maximum buffer size must be
* a non-zero dummy, hence this function will base the maximum buffer
* size on "wMaxPacketSize".
*------------------------------------------------------------------------*/
int
usb_setup_endpoint(struct usb_device *dev,
struct usb_host_endpoint *uhe, usb_size_t bufsize)
{
struct usb_config cfg[2];
uint8_t type = uhe->desc.bmAttributes & UE_XFERTYPE;
uint8_t addr = uhe->desc.bEndpointAddress;
if (uhe->fbsd_buf_size == bufsize) {
/* optimize */
return (0);
}
usbd_transfer_unsetup(uhe->bsd_xfer, 2);
uhe->fbsd_buf_size = bufsize;
if (bufsize == 0) {
return (0);
}
memset(cfg, 0, sizeof(cfg));
if (type == UE_ISOCHRONOUS) {
/*
* Isochronous transfers are special in that they don't fit
* into the BULK/INTR/CONTROL transfer model.
*/
cfg[0].type = type;
cfg[0].endpoint = addr & UE_ADDR;
cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
cfg[0].callback = &usb_linux_isoc_callback;
cfg[0].bufsize = 0; /* use wMaxPacketSize */
cfg[0].frames = usb_max_isoc_frames(dev);
cfg[0].flags.proxy_buffer = 1;
#if 0
/*
* The Linux USB API allows non back-to-back
* isochronous frames which we do not support. If the
* isochronous frames are not back-to-back we need to
* do a copy, and then we need a buffer for
* that. Enable this at your own risk.
*/
cfg[0].flags.ext_buffer = 1;
#endif
cfg[0].flags.short_xfer_ok = 1;
bcopy(cfg, cfg + 1, sizeof(*cfg));
/* Allocate and setup two generic FreeBSD USB transfers */
if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
uhe->bsd_xfer, cfg, 2, uhe, &Giant)) {
return (-EINVAL);
}
} else {
if (bufsize > (1 << 22)) {
/* limit buffer size */
bufsize = (1 << 22);
}
/* Allocate and setup one generic FreeBSD USB transfer */
cfg[0].type = type;
cfg[0].endpoint = addr & UE_ADDR;
cfg[0].direction = addr & (UE_DIR_OUT | UE_DIR_IN);
cfg[0].callback = &usb_linux_non_isoc_callback;
cfg[0].bufsize = bufsize;
cfg[0].flags.ext_buffer = 1; /* enable zero-copy */
cfg[0].flags.proxy_buffer = 1;
cfg[0].flags.short_xfer_ok = 1;
if (usbd_transfer_setup(dev, &uhe->bsd_iface_index,
uhe->bsd_xfer, cfg, 1, uhe, &Giant)) {
return (-EINVAL);
}
}
return (0);
}
/*------------------------------------------------------------------------*
* usb_linux_create_usb_device
*
* The following function is used to build up a per USB device
* structure tree, that mimics the Linux one. The root structure
* is returned by this function.
*------------------------------------------------------------------------*/
static int
usb_linux_create_usb_device(struct usb_device *udev, device_t dev)
{
struct usb_config_descriptor *cd = usbd_get_config_descriptor(udev);
struct usb_descriptor *desc;
struct usb_interface_descriptor *id;
struct usb_endpoint_descriptor *ed;
struct usb_interface *p_ui = NULL;
struct usb_host_interface *p_uhi = NULL;
struct usb_host_endpoint *p_uhe = NULL;
usb_size_t size;
uint16_t niface_total;
uint16_t nedesc;
uint16_t iface_no_curr;
uint16_t iface_index;
uint8_t pass;
uint8_t iface_no;
/*
* We do two passes. One pass for computing necessary memory size
* and one pass to initialize all the allocated memory structures.
*/
for (pass = 0; pass < 2; pass++) {
iface_no_curr = 0xFFFF;
niface_total = 0;
iface_index = 0;
nedesc = 0;
desc = NULL;
/*
* Iterate over all the USB descriptors. Use the USB config
* descriptor pointer provided by the FreeBSD USB stack.
*/
while ((desc = usb_desc_foreach(cd, desc))) {
/*
* Build up a tree according to the descriptors we
* find:
*/
switch (desc->bDescriptorType) {
case UDESC_DEVICE:
break;
case UDESC_ENDPOINT:
ed = (void *)desc;
if ((ed->bLength < sizeof(*ed)) ||
(iface_index == 0))
break;
if (p_uhe) {
bcopy(ed, &p_uhe->desc, sizeof(p_uhe->desc));
p_uhe->bsd_iface_index = iface_index - 1;
TAILQ_INIT(&p_uhe->bsd_urb_list);
p_uhe++;
}
if (p_uhi) {
(p_uhi - 1)->desc.bNumEndpoints++;
}
nedesc++;
break;
case UDESC_INTERFACE:
id = (void *)desc;
if (id->bLength < sizeof(*id))
break;
if (p_uhi) {
bcopy(id, &p_uhi->desc, sizeof(p_uhi->desc));
p_uhi->desc.bNumEndpoints = 0;
p_uhi->endpoint = p_uhe;
p_uhi->string = "";
p_uhi->bsd_iface_index = iface_index;
p_uhi++;
}
iface_no = id->bInterfaceNumber;
niface_total++;
if (iface_no_curr != iface_no) {
if (p_ui) {
p_ui->altsetting = p_uhi - 1;
p_ui->cur_altsetting = p_uhi - 1;
p_ui->num_altsetting = 1;
p_ui->bsd_iface_index = iface_index;
p_ui->linux_udev = udev;
p_ui++;
}
iface_no_curr = iface_no;
iface_index++;
} else {
if (p_ui) {
(p_ui - 1)->num_altsetting++;
}
}
break;
default:
break;
}
}
if (pass == 0) {
size = (sizeof(*p_uhe) * nedesc) +
(sizeof(*p_ui) * iface_index) +
(sizeof(*p_uhi) * niface_total);
p_uhe = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
p_ui = (void *)(p_uhe + nedesc);
p_uhi = (void *)(p_ui + iface_index);
udev->linux_iface_start = p_ui;
udev->linux_iface_end = p_ui + iface_index;
udev->linux_endpoint_start = p_uhe;
udev->linux_endpoint_end = p_uhe + nedesc;
udev->devnum = device_get_unit(dev);
bcopy(&udev->ddesc, &udev->descriptor,
sizeof(udev->descriptor));
bcopy(udev->ctrl_ep.edesc, &udev->ep0.desc,
sizeof(udev->ep0.desc));
}
}
return (0);
}
/*------------------------------------------------------------------------*
* usb_alloc_urb
*
* This function should always be used when you allocate an URB for
* use with the USB Linux stack. In case of an isochronous transfer
* you must specifiy the maximum number of "iso_packets" which you
* plan to transfer per URB. This function is always blocking, and
* "mem_flags" are not regarded like on Linux.
*------------------------------------------------------------------------*/
struct urb *
usb_alloc_urb(uint16_t iso_packets, uint16_t mem_flags)
{
struct urb *urb;
usb_size_t size;
if (iso_packets == 0xFFFF) {
/*
* FreeBSD specific magic value to ask for control transfer
* memory allocation:
*/
size = sizeof(*urb) + sizeof(struct usb_device_request) + mem_flags;
} else {
size = sizeof(*urb) + (iso_packets * sizeof(urb->iso_frame_desc[0]));
}
urb = malloc(size, M_USBDEV, M_WAITOK | M_ZERO);
if (urb) {
cv_init(&urb->cv_wait, "URBWAIT");
if (iso_packets == 0xFFFF) {
urb->setup_packet = (void *)(urb + 1);
urb->transfer_buffer = (void *)(urb->setup_packet +
sizeof(struct usb_device_request));
} else {
urb->number_of_packets = iso_packets;
}
}
return (urb);
}
/*------------------------------------------------------------------------*
* usb_find_host_endpoint
*
* The following function will return the Linux USB host endpoint
* structure that matches the given endpoint type and endpoint
* value. If no match is found, NULL is returned. This function is not
* part of the Linux USB API and is only used internally.
*------------------------------------------------------------------------*/
struct usb_host_endpoint *
usb_find_host_endpoint(struct usb_device *dev, uint8_t type, uint8_t ep)
{
struct usb_host_endpoint *uhe;
struct usb_host_endpoint *uhe_end;
struct usb_host_interface *uhi;
struct usb_interface *ui;
uint8_t ea;
uint8_t at;
uint8_t mask;
if (dev == NULL) {
return (NULL);
}
if (type == UE_CONTROL) {
mask = UE_ADDR;
} else {
mask = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR);
}
ep &= mask;
/*
* Iterate over all the interfaces searching the selected alternate
* setting only, and all belonging endpoints.
*/
for (ui = dev->linux_iface_start;
ui != dev->linux_iface_end;
ui++) {
uhi = ui->cur_altsetting;
if (uhi) {
uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
for (uhe = uhi->endpoint;
uhe != uhe_end;
uhe++) {
ea = uhe->desc.bEndpointAddress;
at = uhe->desc.bmAttributes;
if (((ea & mask) == ep) &&
((at & UE_XFERTYPE) == type)) {
return (uhe);
}
}
}
}
if ((type == UE_CONTROL) && ((ep & UE_ADDR) == 0)) {
return (&dev->ep0);
}
return (NULL);
}
/*------------------------------------------------------------------------*
* usb_altnum_to_altsetting
*
* The following function returns a pointer to an alternate setting by
* index given a "usb_interface" pointer. If the alternate setting by
* index does not exist, NULL is returned. And alternate setting is a
* variant of an interface, but usually with slightly different
* characteristics.
*------------------------------------------------------------------------*/
struct usb_host_interface *
usb_altnum_to_altsetting(const struct usb_interface *intf, uint8_t alt_index)
{
if (alt_index >= intf->num_altsetting) {
return (NULL);
}
return (intf->altsetting + alt_index);
}
/*------------------------------------------------------------------------*
* usb_ifnum_to_if
*
* The following function searches up an USB interface by
* "bInterfaceNumber". If no match is found, NULL is returned.
*------------------------------------------------------------------------*/
struct usb_interface *
usb_ifnum_to_if(struct usb_device *dev, uint8_t iface_no)
{
struct usb_interface *p_ui;
for (p_ui = dev->linux_iface_start;
p_ui != dev->linux_iface_end;
p_ui++) {
if ((p_ui->num_altsetting > 0) &&
(p_ui->altsetting->desc.bInterfaceNumber == iface_no)) {
return (p_ui);
}
}
return (NULL);
}
/*------------------------------------------------------------------------*
* usb_buffer_alloc
*------------------------------------------------------------------------*/
void *
usb_buffer_alloc(struct usb_device *dev, usb_size_t size, uint16_t mem_flags, uint8_t *dma_addr)
{
return (malloc(size, M_USBDEV, M_WAITOK | M_ZERO));
}
/*------------------------------------------------------------------------*
* usbd_get_intfdata
*------------------------------------------------------------------------*/
void *
usbd_get_intfdata(struct usb_interface *intf)
{
return (intf->bsd_priv_sc);
}
/*------------------------------------------------------------------------*
* usb_linux_register
*
* The following function is used by the "USB_DRIVER_EXPORT()" macro,
* and is used to register a Linux USB driver, so that its
* "usb_device_id" structures gets searched a probe time. This
* function is not part of the Linux USB API, and is for internal use
* only.
*------------------------------------------------------------------------*/
void
usb_linux_register(void *arg)
{
struct usb_driver *drv = arg;
mtx_lock(&Giant);
LIST_INSERT_HEAD(&usb_linux_driver_list, drv, linux_driver_list);
mtx_unlock(&Giant);
usb_needs_explore_all();
}
/*------------------------------------------------------------------------*
* usb_linux_deregister
*
* The following function is used by the "USB_DRIVER_EXPORT()" macro,
* and is used to deregister a Linux USB driver. This function will
* ensure that all driver instances belonging to the Linux USB device
* driver in question, gets detached before the driver is
* unloaded. This function is not part of the Linux USB API, and is
* for internal use only.
*------------------------------------------------------------------------*/
void
usb_linux_deregister(void *arg)
{
struct usb_driver *drv = arg;
struct usb_linux_softc *sc;
repeat:
mtx_lock(&Giant);
LIST_FOREACH(sc, &usb_linux_attached_list, sc_attached_list) {
if (sc->sc_udrv == drv) {
mtx_unlock(&Giant);
device_detach(sc->sc_fbsd_dev);
goto repeat;
}
}
LIST_REMOVE(drv, linux_driver_list);
mtx_unlock(&Giant);
}
/*------------------------------------------------------------------------*
* usb_linux_free_device
*
* The following function is only used by the FreeBSD USB stack, to
* cleanup and free memory after that a Linux USB device was attached.
*------------------------------------------------------------------------*/
void
usb_linux_free_device(struct usb_device *dev)
{
struct usb_host_endpoint *uhe;
struct usb_host_endpoint *uhe_end;
int err;
uhe = dev->linux_endpoint_start;
uhe_end = dev->linux_endpoint_end;
while (uhe != uhe_end) {
err = usb_setup_endpoint(dev, uhe, 0);
uhe++;
}
err = usb_setup_endpoint(dev, &dev->ep0, 0);
free(dev->linux_endpoint_start, M_USBDEV);
}
/*------------------------------------------------------------------------*
* usb_buffer_free
*------------------------------------------------------------------------*/
void
usb_buffer_free(struct usb_device *dev, usb_size_t size,
void *addr, uint8_t dma_addr)
{
free(addr, M_USBDEV);
}
/*------------------------------------------------------------------------*
* usb_free_urb
*------------------------------------------------------------------------*/
void
usb_free_urb(struct urb *urb)
{
if (urb == NULL) {
return;
}
/* make sure that the current URB is not active */
usb_kill_urb(urb);
/* destroy condition variable */
cv_destroy(&urb->cv_wait);
/* just free it */
free(urb, M_USBDEV);
}
/*------------------------------------------------------------------------*
* usb_init_urb
*
* The following function can be used to initialize a custom URB. It
* is not recommended to use this function. Use "usb_alloc_urb()"
* instead.
*------------------------------------------------------------------------*/
void
usb_init_urb(struct urb *urb)
{
if (urb == NULL) {
return;
}
memset(urb, 0, sizeof(*urb));
}
/*------------------------------------------------------------------------*
* usb_kill_urb
*------------------------------------------------------------------------*/
void
usb_kill_urb(struct urb *urb)
{
usb_unlink_urb_sub(urb, 1);
}
/*------------------------------------------------------------------------*
* usb_set_intfdata
*
* The following function sets the per Linux USB interface private
* data pointer. It is used by most Linux USB device drivers.
*------------------------------------------------------------------------*/
void
usb_set_intfdata(struct usb_interface *intf, void *data)
{
intf->bsd_priv_sc = data;
}
/*------------------------------------------------------------------------*
* usb_linux_cleanup_interface
*
* The following function will release all FreeBSD USB transfers
* associated with a Linux USB interface. It is for internal use only.
*------------------------------------------------------------------------*/
static void
usb_linux_cleanup_interface(struct usb_device *dev, struct usb_interface *iface)
{
struct usb_host_interface *uhi;
struct usb_host_interface *uhi_end;
struct usb_host_endpoint *uhe;
struct usb_host_endpoint *uhe_end;
int err;
uhi = iface->altsetting;
uhi_end = iface->altsetting + iface->num_altsetting;
while (uhi != uhi_end) {
uhe = uhi->endpoint;
uhe_end = uhi->endpoint + uhi->desc.bNumEndpoints;
while (uhe != uhe_end) {
err = usb_setup_endpoint(dev, uhe, 0);
uhe++;
}
uhi++;
}
}
/*------------------------------------------------------------------------*
* usb_linux_wait_complete
*
* The following function is used by "usb_start_wait_urb()" to wake it
* up, when an USB transfer has finished.
*------------------------------------------------------------------------*/
static void
usb_linux_wait_complete(struct urb *urb)
{
if (urb->transfer_flags & URB_IS_SLEEPING) {
cv_signal(&urb->cv_wait);
}
urb->transfer_flags &= ~URB_WAIT_WAKEUP;
}
/*------------------------------------------------------------------------*
* usb_linux_complete
*------------------------------------------------------------------------*/
static void
usb_linux_complete(struct usb_xfer *xfer)
{
struct urb *urb;
urb = usbd_xfer_get_priv(xfer);
usbd_xfer_set_priv(xfer, NULL);
if (urb->complete) {
(urb->complete) (urb);
}
}
/*------------------------------------------------------------------------*
* usb_linux_isoc_callback
*
* The following is the FreeBSD isochronous USB callback. Isochronous
* frames are USB packets transferred 1000 or 8000 times per second,
* depending on whether a full- or high- speed USB transfer is
* used.
*------------------------------------------------------------------------*/
static void
usb_linux_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
{
usb_frlength_t max_frame = xfer->max_frame_size;
usb_frlength_t offset;
usb_frcount_t x;
struct urb *urb = usbd_xfer_get_priv(xfer);
struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
struct usb_iso_packet_descriptor *uipd;
DPRINTF("\n");
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
if (urb->bsd_isread) {
/* copy in data with regard to the URB */
offset = 0;
for (x = 0; x < urb->number_of_packets; x++) {
uipd = urb->iso_frame_desc + x;
if (uipd->length > xfer->frlengths[x]) {
if (urb->transfer_flags & URB_SHORT_NOT_OK) {
/* XXX should be EREMOTEIO */
uipd->status = -EPIPE;
} else {
uipd->status = 0;
}
} else {
uipd->status = 0;
}
uipd->actual_length = xfer->frlengths[x];
if (!xfer->flags.ext_buffer) {
usbd_copy_out(xfer->frbuffers, offset,
USB_ADD_BYTES(urb->transfer_buffer,
uipd->offset), uipd->actual_length);
}
offset += max_frame;
}
} else {
for (x = 0; x < urb->number_of_packets; x++) {
uipd = urb->iso_frame_desc + x;
uipd->actual_length = xfer->frlengths[x];
uipd->status = 0;
}
}
urb->actual_length = xfer->actlen;
/* check for short transfer */
if (xfer->actlen < xfer->sumlen) {
/* short transfer */
if (urb->transfer_flags & URB_SHORT_NOT_OK) {
/* XXX should be EREMOTEIO */
urb->status = -EPIPE;
} else {
urb->status = 0;
}
} else {
/* success */
urb->status = 0;
}
/* call callback */
usb_linux_complete(xfer);
case USB_ST_SETUP:
tr_setup:
if (xfer->priv_fifo == NULL) {
/* get next transfer */
urb = TAILQ_FIRST(&uhe->bsd_urb_list);
if (urb == NULL) {
/* nothing to do */
return;
}
TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
urb->bsd_urb_list.tqe_prev = NULL;
x = xfer->max_frame_count;
if (urb->number_of_packets > x) {
/* XXX simply truncate the transfer */
urb->number_of_packets = x;
}
} else {
DPRINTF("Already got a transfer\n");
/* already got a transfer (should not happen) */
urb = usbd_xfer_get_priv(xfer);
}
urb->bsd_isread = (uhe->desc.bEndpointAddress & UE_DIR_IN) ? 1 : 0;
if (xfer->flags.ext_buffer) {
/* set virtual address to load */
usbd_xfer_set_frame_data(xfer, 0, urb->transfer_buffer, 0);
}
if (!(urb->bsd_isread)) {
/* copy out data with regard to the URB */
offset = 0;
for (x = 0; x < urb->number_of_packets; x++) {
uipd = urb->iso_frame_desc + x;
usbd_xfer_set_frame_len(xfer, x, uipd->length);
if (!xfer->flags.ext_buffer) {
usbd_copy_in(xfer->frbuffers, offset,
USB_ADD_BYTES(urb->transfer_buffer,
uipd->offset), uipd->length);
}
offset += uipd->length;
}
} else {
/*
* compute the transfer length into the "offset"
* variable
*/
offset = urb->number_of_packets * max_frame;
/* setup "frlengths" array */
for (x = 0; x < urb->number_of_packets; x++) {
uipd = urb->iso_frame_desc + x;
usbd_xfer_set_frame_len(xfer, x, max_frame);
}
}
usbd_xfer_set_priv(xfer, urb);
xfer->flags.force_short_xfer = 0;
xfer->timeout = urb->timeout;
xfer->nframes = urb->number_of_packets;
usbd_transfer_submit(xfer);
return;
default: /* Error */
if (xfer->error == USB_ERR_CANCELLED) {
urb->status = -ECONNRESET;
} else {
urb->status = -EPIPE; /* stalled */
}
/* Set zero for "actual_length" */
urb->actual_length = 0;
/* Set zero for "actual_length" */
for (x = 0; x < urb->number_of_packets; x++) {
urb->iso_frame_desc[x].actual_length = 0;
urb->iso_frame_desc[x].status = urb->status;
}
/* call callback */
usb_linux_complete(xfer);
if (xfer->error == USB_ERR_CANCELLED) {
/* we need to return in this case */
return;
}
goto tr_setup;
}
}
/*------------------------------------------------------------------------*
* usb_linux_non_isoc_callback
*
* The following is the FreeBSD BULK/INTERRUPT and CONTROL USB
* callback. It dequeues Linux USB stack compatible URB's, transforms
* the URB fields into a FreeBSD USB transfer, and defragments the USB
* transfer as required. When the transfer is complete the "complete"
* callback is called.
*------------------------------------------------------------------------*/
static void
usb_linux_non_isoc_callback(struct usb_xfer *xfer, usb_error_t error)
{
enum {
REQ_SIZE = sizeof(struct usb_device_request)
};
struct urb *urb = usbd_xfer_get_priv(xfer);
struct usb_host_endpoint *uhe = usbd_xfer_softc(xfer);
uint8_t *ptr;
usb_frlength_t max_bulk = usbd_xfer_max_len(xfer);
uint8_t data_frame = xfer->flags_int.control_xfr ? 1 : 0;
DPRINTF("\n");
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
if (xfer->flags_int.control_xfr) {
/* don't transfer the setup packet again: */
usbd_xfer_set_frame_len(xfer, 0, 0);
}
if (urb->bsd_isread && (!xfer->flags.ext_buffer)) {
/* copy in data with regard to the URB */
usbd_copy_out(xfer->frbuffers + data_frame, 0,
urb->bsd_data_ptr, xfer->frlengths[data_frame]);
}
urb->bsd_length_rem -= xfer->frlengths[data_frame];
urb->bsd_data_ptr += xfer->frlengths[data_frame];
urb->actual_length += xfer->frlengths[data_frame];
/* check for short transfer */
if (xfer->actlen < xfer->sumlen) {
urb->bsd_length_rem = 0;
/* short transfer */
if (urb->transfer_flags & URB_SHORT_NOT_OK) {
urb->status = -EPIPE;
} else {
urb->status = 0;
}
} else {
/* check remainder */
if (urb->bsd_length_rem > 0) {
goto setup_bulk;
}
/* success */
urb->status = 0;
}
/* call callback */
usb_linux_complete(xfer);
case USB_ST_SETUP:
tr_setup:
/* get next transfer */
urb = TAILQ_FIRST(&uhe->bsd_urb_list);
if (urb == NULL) {
/* nothing to do */
return;
}
TAILQ_REMOVE(&uhe->bsd_urb_list, urb, bsd_urb_list);
urb->bsd_urb_list.tqe_prev = NULL;
usbd_xfer_set_priv(xfer, urb);
xfer->flags.force_short_xfer = 0;
xfer->timeout = urb->timeout;
if (xfer->flags_int.control_xfr) {
/*
* USB control transfers need special handling.
* First copy in the header, then copy in data!
*/
if (!xfer->flags.ext_buffer) {
usbd_copy_in(xfer->frbuffers, 0,
urb->setup_packet, REQ_SIZE);
usbd_xfer_set_frame_len(xfer, 0, REQ_SIZE);
} else {
/* set virtual address to load */
usbd_xfer_set_frame_data(xfer, 0,
urb->setup_packet, REQ_SIZE);
}
ptr = urb->setup_packet;
/* setup data transfer direction and length */
urb->bsd_isread = (ptr[0] & UT_READ) ? 1 : 0;
urb->bsd_length_rem = ptr[6] | (ptr[7] << 8);
} else {
/* setup data transfer direction */
urb->bsd_length_rem = urb->transfer_buffer_length;
urb->bsd_isread = (uhe->desc.bEndpointAddress &
UE_DIR_IN) ? 1 : 0;
}
urb->bsd_data_ptr = urb->transfer_buffer;
urb->actual_length = 0;
setup_bulk:
if (max_bulk > urb->bsd_length_rem) {
max_bulk = urb->bsd_length_rem;
}
/* check if we need to force a short transfer */
if ((max_bulk == urb->bsd_length_rem) &&
(urb->transfer_flags & URB_ZERO_PACKET) &&
(!xfer->flags_int.control_xfr)) {
xfer->flags.force_short_xfer = 1;
}
/* check if we need to copy in data */
if (xfer->flags.ext_buffer) {
/* set virtual address to load */
usbd_xfer_set_frame_data(xfer, data_frame,
urb->bsd_data_ptr, max_bulk);
} else if (!urb->bsd_isread) {
/* copy out data with regard to the URB */
usbd_copy_in(xfer->frbuffers + data_frame, 0,
urb->bsd_data_ptr, max_bulk);
usbd_xfer_set_frame_len(xfer, data_frame, max_bulk);
}
if (xfer->flags_int.control_xfr) {
if (max_bulk > 0) {
xfer->nframes = 2;
} else {
xfer->nframes = 1;
}
} else {
xfer->nframes = 1;
}
usbd_transfer_submit(xfer);
return;
default:
if (xfer->error == USB_ERR_CANCELLED) {
urb->status = -ECONNRESET;
} else {
urb->status = -EPIPE;
}
/* Set zero for "actual_length" */
urb->actual_length = 0;
/* call callback */
usb_linux_complete(xfer);
if (xfer->error == USB_ERR_CANCELLED) {
/* we need to return in this case */
return;
}
goto tr_setup;
}
}
/*------------------------------------------------------------------------*
* usb_fill_bulk_urb
*------------------------------------------------------------------------*/
void
usb_fill_bulk_urb(struct urb *urb, struct usb_device *udev,
struct usb_host_endpoint *uhe, void *buf,
int length, usb_complete_t callback, void *arg)
{
urb->dev = udev;
urb->endpoint = uhe;
urb->transfer_buffer = buf;
urb->transfer_buffer_length = length;
urb->complete = callback;
urb->context = arg;
}
/*------------------------------------------------------------------------*
* usb_bulk_msg
*
* NOTE: This function can also be used for interrupt endpoints!
*
* Return values:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
int
usb_bulk_msg(struct usb_device *udev, struct usb_host_endpoint *uhe,
void *data, int len, uint16_t *pactlen, usb_timeout_t timeout)
{
struct urb *urb;
int err;
if (uhe == NULL)
return (-EINVAL);
if (len < 0)
return (-EINVAL);
err = usb_setup_endpoint(udev, uhe, 4096 /* bytes */);
if (err)
return (err);
urb = usb_alloc_urb(0, 0);
if (urb == NULL)
return (-ENOMEM);
usb_fill_bulk_urb(urb, udev, uhe, data, len,
usb_linux_wait_complete, NULL);
err = usb_start_wait_urb(urb, timeout, pactlen);
usb_free_urb(urb);
return (err);
}