| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/hpt27xx/@/arm/at91/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/hpt27xx/@/arm/at91/at91rm92reg.h |
/*- * Copyright (c) 2005 Olivier Houchard. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* $FreeBSD: release/9.1.0/sys/arm/at91/at91rm92reg.h 213496 2010-10-06 22:25:21Z cognet $ */ #ifndef AT91RM92REG_H_ #define AT91RM92REG_H_ /* Chip Specific limits */ #define RM9200_PLL_A_MIN_IN_FREQ 1000000 /* 1 MHz */ #define RM9200_PLL_A_MAX_IN_FREQ 32000000 /* 32 MHz */ #define RM9200_PLL_A_MIN_OUT_FREQ 80000000 /* 80 MHz */ #define RM9200_PLL_A_MAX_OUT_FREQ 180000000 /* 180 MHz */ #define RM9200_PLL_A_MUL_SHIFT 16 #define RM9200_PLL_A_MUL_MASK 0x7FF #define RM9200_PLL_A_DIV_SHIFT 0 #define RM9200_PLL_A_DIV_MASK 0xFF /* * PLL B input frequency spec sheet says it must be between 1MHz and 32MHz, * but it works down as low as 100kHz, a frequency necessary for some * output frequencies to work. * * PLL Max output frequency is 240MHz. The errata says 180MHz is the max * for some revisions of this part. Be more permissive and optimistic. */ #define RM9200_PLL_B_MIN_IN_FREQ 100000 /* 100 KHz */ #define RM9200_PLL_B_MAX_IN_FREQ 32000000 /* 32 MHz */ #define RM9200_PLL_B_MIN_OUT_FREQ 30000000 /* 30 MHz */ #define RM9200_PLL_B_MAX_OUT_FREQ 240000000 /* 240 MHz */ #define RM9200_PLL_B_MUL_SHIFT 16 #define RM9200_PLL_B_MUL_MASK 0x7FF #define RM9200_PLL_B_DIV_SHIFT 0 #define RM9200_PLL_B_DIV_MASK 0xFF /* * Memory map, from datasheet : * 0x00000000 - 0x0ffffffff : Internal Memories * 0x10000000 - 0x1ffffffff : Chip Select 0 * 0x20000000 - 0x2ffffffff : Chip Select 1 * 0x30000000 - 0x3ffffffff : Chip Select 2 * 0x40000000 - 0x4ffffffff : Chip Select 3 * 0x50000000 - 0x5ffffffff : Chip Select 4 * 0x60000000 - 0x6ffffffff : Chip Select 5 * 0x70000000 - 0x7ffffffff : Chip Select 6 * 0x80000000 - 0x8ffffffff : Chip Select 7 * 0x90000000 - 0xeffffffff : Undefined (Abort) * 0xf0000000 - 0xfffffffff : Peripherals */ #define AT91RM92_BASE 0xd0000000 /* Usart */ #define AT91RM92_USART_SIZE 0x4000 #define AT91RM92_USART0_BASE 0xffc0000 #define AT91RM92_USART0_PDC 0xffc0100 #define AT91RM92_USART0_SIZE AT91RM92_USART_SIZE #define AT91RM92_USART1_BASE 0xffc4000 #define AT91RM92_USART1_PDC 0xffc4100 #define AT91RM92_USART1_SIZE AT91RM92_USART_SIZE #define AT91RM92_USART2_BASE 0xffc8000 #define AT91RM92_USART2_PDC 0xffc8100 #define AT91RM92_USART2_SIZE AT91RM92_USART_SIZE #define AT91RM92_USART3_BASE 0xffcc000 #define AT91RM92_USART3_PDC 0xffcc100 #define AT91RM92_USART3_SIZE AT91RM92_USART_SIZE /* System Registers */ #define AT91RM92_SYS_BASE 0xffff000 #define AT91RM92_SYS_SIZE 0x1000 #if 0 /* Interrupt Controller */ #define IC_SMR (0) /* Source mode register */ #define IC_SVR (128) /* Source vector register */ #define IC_IVR (256) /* IRQ vector register */ #define IC_FVR (260) /* FIQ vector register */ #define IC_ISR (264) /* Interrupt status register */ #define IC_IPR (268) /* Interrupt pending register */ #define IC_IMR (272) /* Interrupt status register */ #define IC_CISR (276) /* Core interrupt status register */ #define IC_IECR (288) /* Interrupt enable command register */ #define IC_IDCR (292) /* Interrupt disable command register */ #define IC_ICCR (296) /* Interrupt clear command register */ #define IC_ISCR (300) /* Interrupt set command register */ #define IC_EOICR (304) /* End of interrupt command register */ #define IC_SPU (308) /* Spurious vector register */ #define IC_DCR (312) /* Debug control register */ #define IC_FFER (320) /* Fast forcing enable register */ #define IC_FFDR (324) /* Fast forcing disable register */ #define IC_FFSR (328) /* Fast forcing status register */ #define PIOA_PER (0x400) /* PIO Enable Register */ #define PIOA_PDR (0x400 + 4) /* PIO Disable Register */ #define PIOA_PSR (0x400 + 8) /* PIO status register */ #define PIOA_OER (0x400 + 16) /* Output enable register */ #define PIOA_ODR (0x400 + 20) /* Output disable register */ #define PIOA_OSR (0x400 + 24) /* Output status register */ #define PIOA_IFER (0x400 + 32) /* Input filter enable register */ #define PIOA_IFDR (0x400 + 36) /* Input filter disable register */ #define PIOA_IFSR (0x400 + 40) /* Input filter status register */ #define PIOA_SODR (0x400 + 48) /* Set output data register */ #define PIOA_CODR (0x400 + 52) /* Clear output data register */ #define PIOA_ODSR (0x400 + 56) /* Output data status register */ #define PIOA_PDSR (0x400 + 60) /* Pin data status register */ #define PIOA_IER (0x400 + 64) /* Interrupt enable register */ #define PIOA_IDR (0x400 + 68) /* Interrupt disable register */ #define PIOA_IMR (0x400 + 72) /* Interrupt mask register */ #define PIOA_ISR (0x400 + 76) /* Interrupt status register */ #define PIOA_MDER (0x400 + 80) /* Multi driver enable register */ #define PIOA_MDDR (0x400 + 84) /* Multi driver disable register */ #define PIOA_MDSR (0x400 + 88) /* Multi driver status register */ #define PIOA_PPUDR (0x400 + 96) /* Pull-up disable register */ #define PIOA_PPUER (0x400 + 100) /* Pull-up enable register */ #define PIOA_PPUSR (0x400 + 104) /* Pad pull-up status register */ #define PIOA_ASR (0x400 + 112) /* Select A register */ #define PIOA_BSR (0x400 + 116) /* Select B register */ #define PIOA_ABSR (0x400 + 120) /* AB Select status register */ #define PIOA_OWER (0x400 + 160) /* Output Write enable register */ #define PIOA_OWDR (0x400 + 164) /* Output write disable register */ #define PIOA_OWSR (0x400 + 168) /* Output write status register */ #define PIOB_PER (0x400) /* PIO Enable Register */ #define PIOB_PDR (0x600 + 4) /* PIO Disable Register */ #define PIOB_PSR (0x600 + 8) /* PIO status register */ #define PIOB_OER (0x600 + 16) /* Output enable register */ #define PIOB_ODR (0x600 + 20) /* Output disable register */ #define PIOB_OSR (0x600 + 24) /* Output status register */ #define PIOB_IFER (0x600 + 32) /* Input filter enable register */ #define PIOB_IFDR (0x600 + 36) /* Input filter disable register */ #define PIOB_IFSR (0x600 + 40) /* Input filter status register */ #define PIOB_SODR (0x600 + 48) /* Set output data register */ #define PIOB_CODR (0x600 + 52) /* Clear output data register */ #define PIOB_ODSR (0x600 + 56) /* Output data status register */ #define PIOB_PDSR (0x600 + 60) /* Pin data status register */ #define PIOB_IER (0x600 + 64) /* Interrupt enable register */ #define PIOB_IDR (0x600 + 68) /* Interrupt disable register */ #define PIOB_IMR (0x600 + 72) /* Interrupt mask register */ #define PIOB_ISR (0x600 + 76) /* Interrupt status register */ #define PIOB_MDER (0x600 + 80) /* Multi driver enable register */ #define PIOB_MDDR (0x600 + 84) /* Multi driver disable register */ #define PIOB_MDSR (0x600 + 88) /* Multi driver status register */ #define PIOB_PPUDR (0x600 + 96) /* Pull-up disable register */ #define PIOB_PPUER (0x600 + 100) /* Pull-up enable register */ #define PIOB_PPUSR (0x600 + 104) /* Pad pull-up status register */ #define PIOB_ASR (0x600 + 112) /* Select A register */ #define PIOB_BSR (0x600 + 116) /* Select B register */ #define PIOB_ABSR (0x600 + 120) /* AB Select status register */ #define PIOB_OWER (0x600 + 160) /* Output Write enable register */ #define PIOB_OWDR (0x600 + 164) /* Output write disable register */ #define PIOB_OWSR (0x600 + 168) /* Output write status register */ #define PIOC_PER (0x800) /* PIO Enable Register */ #define PIOC_PDR (0x800 + 4) /* PIO Disable Register */ #define PIOC_PSR (0x800 + 8) /* PIO status register */ #define PIOC_OER (0x800 + 16) /* Output enable register */ #define PIOC_ODR (0x800 + 20) /* Output disable register */ #define PIOC_OSR (0x800 + 24) /* Output status register */ #define PIOC_IFER (0x800 + 32) /* Input filter enable register */ #define PIOC_IFDR (0x800 + 36) /* Input filter disable register */ #define PIOC_IFSR (0x800 + 40) /* Input filter status register */ #define PIOC_SODR (0x800 + 48) /* Set output data register */ #define PIOC_CODR (0x800 + 52) /* Clear output data register */ #define PIOC_ODSR (0x800 + 56) /* Output data status register */ #define PIOC_PDSR (0x800 + 60) /* Pin data status register */ #define PIOC_IER (0x800 + 64) /* Interrupt enable register */ #define PIOC_IDR (0x800 + 68) /* Interrupt disable register */ #define PIOC_IMR (0x800 + 72) /* Interrupt mask register */ #define PIOC_ISR (0x800 + 76) /* Interrupt status register */ #define PIOC_MDER (0x800 + 80) /* Multi driver enable register */ #define PIOC_MDDR (0x800 + 84) /* Multi driver disable register */ #define PIOC_MDSR (0x800 + 88) /* Multi driver status register */ #define PIOC_PPUDR (0x800 + 96) /* Pull-up disable register */ #define PIOC_PPUER (0x800 + 100) /* Pull-up enable register */ #define PIOC_PPUSR (0x800 + 104) /* Pad pull-up status register */ #define PIOC_ASR (0x800 + 112) /* Select A register */ #define PIOC_BSR (0x800 + 116) /* Select B register */ #define PIOC_ABSR (0x800 + 120) /* AB Select status register */ #define PIOC_OWER (0x800 + 160) /* Output Write enable register */ #define PIOC_OWDR (0x800 + 164) /* Output write disable register */ #define PIOC_OWSR (0x800 + 168) /* Output write status register */ #define PIOD_PER (0xa00) /* PIO Enable Register */ #define PIOD_PDR (0xa00 + 4) /* PIO Disable Register */ #define PIOD_PSR (0xa00 + 8) /* PIO status register */ #define PIOD_OER (0xa00 + 16) /* Output enable register */ #define PIOD_ODR (0xa00 + 20) /* Output disable register */ #define PIOD_OSR (0xa00 + 24) /* Output status register */ #define PIOD_IFER (0xa00 + 32) /* Input filter enable register */ #define PIOD_IFDR (0xa00 + 36) /* Input filter disable register */ #define PIOD_IFSR (0xa00 + 40) /* Input filter status register */ #define PIOD_SODR (0xa00 + 48) /* Set output data register */ #define PIOD_CODR (0xa00 + 52) /* Clear output data register */ #define PIOD_ODSR (0xa00 + 56) /* Output data status register */ #define PIOD_PDSR (0xa00 + 60) /* Pin data status register */ #define PIOD_IER (0xa00 + 64) /* Interrupt enable register */ #define PIOD_IDR (0xa00 + 68) /* Interrupt disable register */ #define PIOD_IMR (0xa00 + 72) /* Interrupt mask register */ #define PIOD_ISR (0xa00 + 76) /* Interrupt status register */ #define PIOD_MDER (0xa00 + 80) /* Multi driver enable register */ #define PIOD_MDDR (0xa00 + 84) /* Multi driver disable register */ #define PIOD_MDSR (0xa00 + 88) /* Multi driver status register */ #define PIOD_PPUDR (0xa00 + 96) /* Pull-up disable register */ #define PIOD_PPUER (0xa00 + 100) /* Pull-up enable register */ #define PIOD_PPUSR (0xa00 + 104) /* Pad pull-up status register */ #define PIOD_ASR (0xa00 + 112) /* Select A register */ #define PIOD_BSR (0xa00 + 116) /* Select B register */ #define PIOD_ABSR (0xa00 + 120) /* AB Select status register */ #define PIOD_OWER (0xa00 + 160) /* Output Write enable register */ #define PIOD_OWDR (0xa00 + 164) /* Output write disable register */ #define PIOD_OWSR (0xa00 + 168) /* Output write status register */ #endif /* * PIO */ #define AT91RM92_PIO_SIZE 0x200 #define AT91RM92_PIOA_BASE 0xffff400 #define AT91RM92_PIOA_SIZE AT91RM92_PIO_SIZE #define AT91RM92_PIOB_BASE 0xffff600 #define AT91RM92_PIOB_SIZE AT91RM92_PIO_SIZE #define AT91RM92_PIOC_BASE 0xffff800 #define AT91RM92_PIOC_SIZE AT91RM92_PIO_SIZE #define AT91RM92_PIOD_BASE 0xffffa00 #define AT91RM92_PIOD_SIZE AT91RM92_PIO_SIZE /* * PMC */ #define AT91RM92_PMC_BASE 0xffffc00 #define AT91RM92_PMC_SIZE 0x100 /* IRQs : */ /* * 0: AIC * 1: System peripheral (System timer, RTC, DBGU) * 2: PIO Controller A * 3: PIO Controller B * 4: PIO Controller C * 5: PIO Controller D * 6: USART 0 * 7: USART 1 * 8: USART 2 * 9: USART 3 * 10: MMC Interface * 11: USB device port * 12: Two-wirte interface * 13: SPI * 14: SSC * 15: SSC * 16: SSC * 17: Timer Counter 0 * 18: Timer Counter 1 * 19: Timer Counter 2 * 20: Timer Counter 3 * 21: Timer Counter 4 * 22: Timer Counter 6 * 23: USB Host port * 24: Ethernet * 25: AIC * 26: AIC * 27: AIC * 28: AIC * 29: AIC * 30: AIC * 31: AIC */ #define AT91RM92_IRQ_SYSTEM 1 #define AT91RM92_IRQ_PIOA 2 #define AT91RM92_IRQ_PIOB 3 #define AT91RM92_IRQ_PIOC 4 #define AT91RM92_IRQ_PIOD 5 #define AT91RM92_IRQ_USART0 6 #define AT91RM92_IRQ_USART1 7 #define AT91RM92_IRQ_USART2 8 #define AT91RM92_IRQ_USART3 9 #define AT91RM92_IRQ_MCI 10 #define AT91RM92_IRQ_UDP 11 #define AT91RM92_IRQ_TWI 12 #define AT91RM92_IRQ_SPI 13 #define AT91RM92_IRQ_SSC0 14 #define AT91RM92_IRQ_SSC1 15 #define AT91RM92_IRQ_SSC2 16 #define AT91RM92_IRQ_TC0 17,18,19 #define AT91RM92_IRQ_TC0C0 17 #define AT91RM92_IRQ_TC0C1 18 #define AT91RM92_IRQ_TC0C2 19 #define AT91RM92_IRQ_TC1 20,21,22 #define AT91RM92_IRQ_TC1C1 20 #define AT91RM92_IRQ_TC1C2 21 #define AT91RM92_IRQ_TC1C3 22 #define AT91RM92_IRQ_UHP 23 #define AT91RM92_IRQ_EMAC 24 #define AT91RM92_IRQ_AIC_IRQ0 25 #define AT91RM92_IRQ_AIC_IRQ1 26 #define AT91RM92_IRQ_AIC_IRQ2 27 #define AT91RM92_IRQ_AIC_IRQ3 28 #define AT91RM92_IRQ_AIC_IRQ4 29 #define AT91RM92_IRQ_AIC_IRQ5 30 #define AT91RM92_IRQ_AIC_IRQ6 31 /* Alias */ #define AT91RM92_IRQ_DBGU AT91RM92_IRQ_SYSTEM #define AT91RM92_IRQ_PMC AT91RM92_IRQ_SYSTEM #define AT91RM92_IRQ_ST AT91RM92_IRQ_SYSTEM #define AT91RM92_IRQ_RTC AT91RM92_IRQ_SYSTEM #define AT91RM92_IRQ_MC AT91RM92_IRQ_SYSTEM #define AT91RM92_IRQ_OHCI AT91RM92_IRQ_UHP #define AT91RM92_IRQ_AIC -1 #define AT91RM92_IRQ_CF -1 /* Timer */ #define AT91RM92_AIC_BASE 0xffff000 #define AT91RM92_AIC_SIZE 0x200 /* DBGU */ #define AT91RM92_DBGU_BASE 0xffff200 #define AT91RM92_DBGU_SIZE 0x200 #define AT91RM92_RTC_BASE 0xffffe00 #define AT91RM92_RTC_SIZE 0x100 #define AT91RM92_MC_BASE 0xfffff00 #define AT91RM92_MC_SIZE 0x100 #define AT91RM92_ST_BASE 0xffffd00 #define AT91RM92_ST_SIZE 0x100 #define AT91RM92_SPI_BASE 0xffe0000 #define AT91RM92_SPI_SIZE 0x4000 #define AT91RM92_SPI_PDC 0xffe0100 #define AT91RM92_SSC_SIZE 0x4000 #define AT91RM92_SSC0_BASE 0xffd0000 #define AT91RM92_SSC0_PDC 0xffd0100 #define AT91RM92_SSC0_SIZE AT91RM92_SSC_SIZE #define AT91RM92_SSC1_BASE 0xffd4000 #define AT91RM92_SSC1_PDC 0xffd4100 #define AT91RM92_SSC1_SIZE AT91RM92_SSC_SIZE #define AT91RM92_SSC2_BASE 0xffd8000 #define AT91RM92_SSC2_PDC 0xffd8100 #define AT91RM92_SSC2_SIZE AT91RM92_SSC_SIZE #define AT91RM92_EMAC_BASE 0xffbc000 #define AT91RM92_EMAC_SIZE 0x4000 #define AT91RM92_TWI_BASE 0xffb8000 #define AT91RM92_TWI_SIZE 0x4000 #define AT91RM92_MCI_BASE 0xffb4000 #define AT91RM92_MCI_PDC 0xffb4100 #define AT91RM92_MCI_SIZE 0x4000 #define AT91RM92_UDP_BASE 0xffb0000 #define AT91RM92_UDP_SIZE 0x4000 #define AT91RM92_TC_SIZE 0x4000 #define AT91RM92_TC0_BASE 0xffa0000 #define AT91RM92_TC0_SIZE AT91RM92_TC_SIZE #define AT91RM92_TC0C0_BASE 0xffa0000 #define AT91RM92_TC0C1_BASE 0xffa0040 #define AT91RM92_TC0C2_BASE 0xffa0080 #define AT91RM92_TC1_BASE 0xffa4000 #define AT91RM92_TC1_SIZE AT91RM92_TC_SIZE #define AT91RM92_TC1C0_BASE 0xffa4000 #define AT91RM92_TC1C1_BASE 0xffa4040 #define AT91RM92_TC1C2_BASE 0xffa4080 /* XXX Needs to be carfully coordinated with * other * soc's so phyical and vm address * mapping are unique. XXX */ #define AT91RM92_OHCI_BASE 0xdfe00000 #define AT91RM92_OHCI_PA_BASE 0x00300000 #define AT91RM92_OHCI_SIZE 0x00100000 #define AT91RM92_CF_BASE 0xdfd00000 #define AT91RM92_CF_PA_BASE 0x51400000 #define AT91RM92_CF_SIZE 0x00100000 #ifndef AT91C_MASTER_CLOCK #define AT91C_MASTER_CLOCK 60000000 #endif /* SDRAMC */ #define AT91RM92_SDRAMC_BASE 0xfffff90 #define AT91RM92_SDRAMC_MR 0x00 #define AT91RM92_SDRAMC_MR_MODE_NORMAL 0 #define AT91RM92_SDRAMC_MR_MODE_NOP 1 #define AT91RM92_SDRAMC_MR_MODE_PRECHARGE 2 #define AT91RM92_SDRAMC_MR_MODE_LOAD_MODE_REGISTER 3 #define AT91RM92_SDRAMC_MR_MODE_REFRESH 4 #define AT91RM92_SDRAMC_MR_DBW_16 0x10 #define AT91RM92_SDRAMC_TR 0x04 #define AT91RM92_SDRAMC_CR 0x08 #define AT91RM92_SDRAMC_CR_NC_8 0x0 #define AT91RM92_SDRAMC_CR_NC_9 0x1 #define AT91RM92_SDRAMC_CR_NC_10 0x2 #define AT91RM92_SDRAMC_CR_NC_11 0x3 #define AT91RM92_SDRAMC_CR_NC_MASK 0x00000003 #define AT91RM92_SDRAMC_CR_NR_11 0x0 #define AT91RM92_SDRAMC_CR_NR_12 0x4 #define AT91RM92_SDRAMC_CR_NR_13 0x8 #define AT91RM92_SDRAMC_CR_NR_RES 0xc #define AT91RM92_SDRAMC_CR_NR_MASK 0x0000000c #define AT91RM92_SDRAMC_CR_NB_2 0x00 #define AT91RM92_SDRAMC_CR_NB_4 0x10 #define AT91RM92_SDRAMC_CR_NB_MASK 0x00000010 #define AT91RM92_SDRAMC_CR_NCAS_MASK 0x00000060 #define AT91RM92_SDRAMC_CR_TWR_MASK 0x00000780 #define AT91RM92_SDRAMC_CR_TRC_MASK 0x00007800 #define AT91RM92_SDRAMC_CR_TRP_MASK 0x00078000 #define AT91RM92_SDRAMC_CR_TRCD_MASK 0x00780000 #define AT91RM92_SDRAMC_CR_TRAS_MASK 0x07800000 #define AT91RM92_SDRAMC_CR_TXSR_MASK 0x78000000 #define AT91RM92_SDRAMC_SRR 0x0c #define AT91RM92_SDRAMC_LPR 0x10 #define AT91RM92_SDRAMC_IER 0x14 #define AT91RM92_SDRAMC_IDR 0x18 #define AT91RM92_SDRAMC_IMR 0x1c #define AT91RM92_SDRAMC_ISR 0x20 #define AT91RM92_SDRAMC_IER_RES 0x1 #endif /* AT91RM92REG_H_ */