| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/if_tun/@/dev/usb/wlan/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/if_tun/@/dev/usb/wlan/if_run.c |
/*-
* Copyright (c) 2008,2010 Damien Bergamini <damien.bergamini@free.fr>
* ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca>
* USB Consulting, Hans Petter Selasky <hselasky@freebsd.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/usb/wlan/if_run.c 236897 2012-06-11 17:23:24Z hselasky $");
/*-
* Ralink Technology RT2700U/RT2800U/RT3000U chipset driver.
* http://www.ralinktech.com/
*/
#include <sys/param.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/linker.h>
#include <sys/firmware.h>
#include <sys/kdb.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/if_ether.h>
#include <netinet/ip.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#include <net80211/ieee80211_radiotap.h>
#include <net80211/ieee80211_ratectl.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include "usbdevs.h"
#define USB_DEBUG_VAR run_debug
#include <dev/usb/usb_debug.h>
#include <dev/usb/wlan/if_runreg.h>
#include <dev/usb/wlan/if_runvar.h>
#define N(_a) ((int)(sizeof((_a)) / sizeof((_a)[0])))
#ifdef USB_DEBUG
#define RUN_DEBUG
#endif
#ifdef RUN_DEBUG
int run_debug = 0;
SYSCTL_NODE(_hw_usb, OID_AUTO, run, CTLFLAG_RW, 0, "USB run");
SYSCTL_INT(_hw_usb_run, OID_AUTO, debug, CTLFLAG_RW, &run_debug, 0,
"run debug level");
#endif
#define IEEE80211_HAS_ADDR4(wh) \
(((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS)
/*
* Because of LOR in run_key_delete(), use atomic instead.
* '& RUN_CMDQ_MASQ' is to loop cmdq[].
*/
#define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ)
static const STRUCT_USB_HOST_ID run_devs[] = {
#define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
RUN_DEV(ABOCOM, RT2770),
RUN_DEV(ABOCOM, RT2870),
RUN_DEV(ABOCOM, RT3070),
RUN_DEV(ABOCOM, RT3071),
RUN_DEV(ABOCOM, RT3072),
RUN_DEV(ABOCOM2, RT2870_1),
RUN_DEV(ACCTON, RT2770),
RUN_DEV(ACCTON, RT2870_1),
RUN_DEV(ACCTON, RT2870_2),
RUN_DEV(ACCTON, RT2870_3),
RUN_DEV(ACCTON, RT2870_4),
RUN_DEV(ACCTON, RT2870_5),
RUN_DEV(ACCTON, RT3070),
RUN_DEV(ACCTON, RT3070_1),
RUN_DEV(ACCTON, RT3070_2),
RUN_DEV(ACCTON, RT3070_3),
RUN_DEV(ACCTON, RT3070_4),
RUN_DEV(ACCTON, RT3070_5),
RUN_DEV(AIRTIES, RT3070),
RUN_DEV(ALLWIN, RT2070),
RUN_DEV(ALLWIN, RT2770),
RUN_DEV(ALLWIN, RT2870),
RUN_DEV(ALLWIN, RT3070),
RUN_DEV(ALLWIN, RT3071),
RUN_DEV(ALLWIN, RT3072),
RUN_DEV(ALLWIN, RT3572),
RUN_DEV(AMIGO, RT2870_1),
RUN_DEV(AMIGO, RT2870_2),
RUN_DEV(AMIT, CGWLUSB2GNR),
RUN_DEV(AMIT, RT2870_1),
RUN_DEV(AMIT2, RT2870),
RUN_DEV(ASUS, RT2870_1),
RUN_DEV(ASUS, RT2870_2),
RUN_DEV(ASUS, RT2870_3),
RUN_DEV(ASUS, RT2870_4),
RUN_DEV(ASUS, RT2870_5),
RUN_DEV(ASUS, USBN13),
RUN_DEV(ASUS, RT3070_1),
RUN_DEV(ASUS2, USBN11),
RUN_DEV(AZUREWAVE, RT2870_1),
RUN_DEV(AZUREWAVE, RT2870_2),
RUN_DEV(AZUREWAVE, RT3070_1),
RUN_DEV(AZUREWAVE, RT3070_2),
RUN_DEV(AZUREWAVE, RT3070_3),
RUN_DEV(BELKIN, F5D8053V3),
RUN_DEV(BELKIN, F5D8055),
RUN_DEV(BELKIN, F5D8055V2),
RUN_DEV(BELKIN, F6D4050V1),
RUN_DEV(BELKIN, RT2870_1),
RUN_DEV(BELKIN, RT2870_2),
RUN_DEV(CISCOLINKSYS, AE1000),
RUN_DEV(CISCOLINKSYS2, RT3070),
RUN_DEV(CISCOLINKSYS3, RT3070),
RUN_DEV(CONCEPTRONIC2, RT2870_1),
RUN_DEV(CONCEPTRONIC2, RT2870_2),
RUN_DEV(CONCEPTRONIC2, RT2870_3),
RUN_DEV(CONCEPTRONIC2, RT2870_4),
RUN_DEV(CONCEPTRONIC2, RT2870_5),
RUN_DEV(CONCEPTRONIC2, RT2870_6),
RUN_DEV(CONCEPTRONIC2, RT2870_7),
RUN_DEV(CONCEPTRONIC2, RT2870_8),
RUN_DEV(CONCEPTRONIC2, RT3070_1),
RUN_DEV(CONCEPTRONIC2, RT3070_2),
RUN_DEV(CONCEPTRONIC2, VIGORN61),
RUN_DEV(COREGA, CGWLUSB300GNM),
RUN_DEV(COREGA, RT2870_1),
RUN_DEV(COREGA, RT2870_2),
RUN_DEV(COREGA, RT2870_3),
RUN_DEV(COREGA, RT3070),
RUN_DEV(CYBERTAN, RT2870),
RUN_DEV(DLINK, RT2870),
RUN_DEV(DLINK, RT3072),
RUN_DEV(DLINK2, DWA130),
RUN_DEV(DLINK2, RT2870_1),
RUN_DEV(DLINK2, RT2870_2),
RUN_DEV(DLINK2, RT3070_1),
RUN_DEV(DLINK2, RT3070_2),
RUN_DEV(DLINK2, RT3070_3),
RUN_DEV(DLINK2, RT3070_4),
RUN_DEV(DLINK2, RT3070_5),
RUN_DEV(DLINK2, RT3072),
RUN_DEV(DLINK2, RT3072_1),
RUN_DEV(EDIMAX, EW7717),
RUN_DEV(EDIMAX, EW7718),
RUN_DEV(EDIMAX, RT2870_1),
RUN_DEV(ENCORE, RT3070_1),
RUN_DEV(ENCORE, RT3070_2),
RUN_DEV(ENCORE, RT3070_3),
RUN_DEV(GIGABYTE, GNWB31N),
RUN_DEV(GIGABYTE, GNWB32L),
RUN_DEV(GIGABYTE, RT2870_1),
RUN_DEV(GIGASET, RT3070_1),
RUN_DEV(GIGASET, RT3070_2),
RUN_DEV(GUILLEMOT, HWNU300),
RUN_DEV(HAWKING, HWUN2),
RUN_DEV(HAWKING, RT2870_1),
RUN_DEV(HAWKING, RT2870_2),
RUN_DEV(HAWKING, RT3070),
RUN_DEV(IODATA, RT3072_1),
RUN_DEV(IODATA, RT3072_2),
RUN_DEV(IODATA, RT3072_3),
RUN_DEV(IODATA, RT3072_4),
RUN_DEV(LINKSYS4, RT3070),
RUN_DEV(LINKSYS4, WUSB100),
RUN_DEV(LINKSYS4, WUSB54GCV3),
RUN_DEV(LINKSYS4, WUSB600N),
RUN_DEV(LINKSYS4, WUSB600NV2),
RUN_DEV(LOGITEC, RT2870_1),
RUN_DEV(LOGITEC, RT2870_2),
RUN_DEV(LOGITEC, RT2870_3),
RUN_DEV(LOGITEC, LANW300NU2),
RUN_DEV(MELCO, RT2870_1),
RUN_DEV(MELCO, RT2870_2),
RUN_DEV(MELCO, WLIUCAG300N),
RUN_DEV(MELCO, WLIUCG300N),
RUN_DEV(MELCO, WLIUCG301N),
RUN_DEV(MELCO, WLIUCGN),
RUN_DEV(MELCO, WLIUCGNM),
RUN_DEV(MOTOROLA4, RT2770),
RUN_DEV(MOTOROLA4, RT3070),
RUN_DEV(MSI, RT3070_1),
RUN_DEV(MSI, RT3070_2),
RUN_DEV(MSI, RT3070_3),
RUN_DEV(MSI, RT3070_4),
RUN_DEV(MSI, RT3070_5),
RUN_DEV(MSI, RT3070_6),
RUN_DEV(MSI, RT3070_7),
RUN_DEV(MSI, RT3070_8),
RUN_DEV(MSI, RT3070_9),
RUN_DEV(MSI, RT3070_10),
RUN_DEV(MSI, RT3070_11),
RUN_DEV(OVISLINK, RT3072),
RUN_DEV(PARA, RT3070),
RUN_DEV(PEGATRON, RT2870),
RUN_DEV(PEGATRON, RT3070),
RUN_DEV(PEGATRON, RT3070_2),
RUN_DEV(PEGATRON, RT3070_3),
RUN_DEV(PHILIPS, RT2870),
RUN_DEV(PLANEX2, GWUS300MINIS),
RUN_DEV(PLANEX2, GWUSMICRON),
RUN_DEV(PLANEX2, RT2870),
RUN_DEV(PLANEX2, RT3070),
RUN_DEV(QCOM, RT2870),
RUN_DEV(QUANTA, RT3070),
RUN_DEV(RALINK, RT2070),
RUN_DEV(RALINK, RT2770),
RUN_DEV(RALINK, RT2870),
RUN_DEV(RALINK, RT3070),
RUN_DEV(RALINK, RT3071),
RUN_DEV(RALINK, RT3072),
RUN_DEV(RALINK, RT3370),
RUN_DEV(RALINK, RT3572),
RUN_DEV(RALINK, RT8070),
RUN_DEV(SAMSUNG, WIS09ABGN),
RUN_DEV(SAMSUNG2, RT2870_1),
RUN_DEV(SENAO, RT2870_1),
RUN_DEV(SENAO, RT2870_2),
RUN_DEV(SENAO, RT2870_3),
RUN_DEV(SENAO, RT2870_4),
RUN_DEV(SENAO, RT3070),
RUN_DEV(SENAO, RT3071),
RUN_DEV(SENAO, RT3072_1),
RUN_DEV(SENAO, RT3072_2),
RUN_DEV(SENAO, RT3072_3),
RUN_DEV(SENAO, RT3072_4),
RUN_DEV(SENAO, RT3072_5),
RUN_DEV(SITECOMEU, RT2770),
RUN_DEV(SITECOMEU, RT2870_1),
RUN_DEV(SITECOMEU, RT2870_2),
RUN_DEV(SITECOMEU, RT2870_3),
RUN_DEV(SITECOMEU, RT2870_4),
RUN_DEV(SITECOMEU, RT3070),
RUN_DEV(SITECOMEU, RT3070_2),
RUN_DEV(SITECOMEU, RT3070_3),
RUN_DEV(SITECOMEU, RT3070_4),
RUN_DEV(SITECOMEU, RT3071),
RUN_DEV(SITECOMEU, RT3072_1),
RUN_DEV(SITECOMEU, RT3072_2),
RUN_DEV(SITECOMEU, RT3072_3),
RUN_DEV(SITECOMEU, RT3072_4),
RUN_DEV(SITECOMEU, RT3072_5),
RUN_DEV(SITECOMEU, RT3072_6),
RUN_DEV(SITECOMEU, WL608),
RUN_DEV(SPARKLAN, RT2870_1),
RUN_DEV(SPARKLAN, RT3070),
RUN_DEV(SWEEX2, LW153),
RUN_DEV(SWEEX2, LW303),
RUN_DEV(SWEEX2, LW313),
RUN_DEV(TOSHIBA, RT3070),
RUN_DEV(UMEDIA, RT2870_1),
RUN_DEV(ZCOM, RT2870_1),
RUN_DEV(ZCOM, RT2870_2),
RUN_DEV(ZINWELL, RT2870_1),
RUN_DEV(ZINWELL, RT2870_2),
RUN_DEV(ZINWELL, RT3070),
RUN_DEV(ZINWELL, RT3072_1),
RUN_DEV(ZINWELL, RT3072_2),
RUN_DEV(ZYXEL, RT2870_1),
RUN_DEV(ZYXEL, RT2870_2),
#undef RUN_DEV
};
static device_probe_t run_match;
static device_attach_t run_attach;
static device_detach_t run_detach;
static usb_callback_t run_bulk_rx_callback;
static usb_callback_t run_bulk_tx_callback0;
static usb_callback_t run_bulk_tx_callback1;
static usb_callback_t run_bulk_tx_callback2;
static usb_callback_t run_bulk_tx_callback3;
static usb_callback_t run_bulk_tx_callback4;
static usb_callback_t run_bulk_tx_callback5;
static void run_bulk_tx_callbackN(struct usb_xfer *xfer,
usb_error_t error, unsigned int index);
static struct ieee80211vap *run_vap_create(struct ieee80211com *,
const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
const uint8_t [IEEE80211_ADDR_LEN],
const uint8_t [IEEE80211_ADDR_LEN]);
static void run_vap_delete(struct ieee80211vap *);
static void run_cmdq_cb(void *, int);
static void run_setup_tx_list(struct run_softc *,
struct run_endpoint_queue *);
static void run_unsetup_tx_list(struct run_softc *,
struct run_endpoint_queue *);
static int run_load_microcode(struct run_softc *);
static int run_reset(struct run_softc *);
static usb_error_t run_do_request(struct run_softc *,
struct usb_device_request *, void *);
static int run_read(struct run_softc *, uint16_t, uint32_t *);
static int run_read_region_1(struct run_softc *, uint16_t, uint8_t *, int);
static int run_write_2(struct run_softc *, uint16_t, uint16_t);
static int run_write(struct run_softc *, uint16_t, uint32_t);
static int run_write_region_1(struct run_softc *, uint16_t,
const uint8_t *, int);
static int run_set_region_4(struct run_softc *, uint16_t, uint32_t, int);
static int run_efuse_read_2(struct run_softc *, uint16_t, uint16_t *);
static int run_eeprom_read_2(struct run_softc *, uint16_t, uint16_t *);
static int run_rt2870_rf_write(struct run_softc *, uint8_t, uint32_t);
static int run_rt3070_rf_read(struct run_softc *, uint8_t, uint8_t *);
static int run_rt3070_rf_write(struct run_softc *, uint8_t, uint8_t);
static int run_bbp_read(struct run_softc *, uint8_t, uint8_t *);
static int run_bbp_write(struct run_softc *, uint8_t, uint8_t);
static int run_mcu_cmd(struct run_softc *, uint8_t, uint16_t);
static const char *run_get_rf(int);
static int run_read_eeprom(struct run_softc *);
static struct ieee80211_node *run_node_alloc(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
static int run_media_change(struct ifnet *);
static int run_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int run_wme_update(struct ieee80211com *);
static void run_wme_update_cb(void *);
static void run_key_update_begin(struct ieee80211vap *);
static void run_key_update_end(struct ieee80211vap *);
static void run_key_set_cb(void *);
static int run_key_set(struct ieee80211vap *, struct ieee80211_key *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
static void run_key_delete_cb(void *);
static int run_key_delete(struct ieee80211vap *, struct ieee80211_key *);
static void run_ratectl_to(void *);
static void run_ratectl_cb(void *, int);
static void run_drain_fifo(void *);
static void run_iter_func(void *, struct ieee80211_node *);
static void run_newassoc_cb(void *);
static void run_newassoc(struct ieee80211_node *, int);
static void run_rx_frame(struct run_softc *, struct mbuf *, uint32_t);
static void run_tx_free(struct run_endpoint_queue *pq,
struct run_tx_data *, int);
static void run_set_tx_desc(struct run_softc *, struct run_tx_data *);
static int run_tx(struct run_softc *, struct mbuf *,
struct ieee80211_node *);
static int run_tx_mgt(struct run_softc *, struct mbuf *,
struct ieee80211_node *);
static int run_sendprot(struct run_softc *, const struct mbuf *,
struct ieee80211_node *, int, int);
static int run_tx_param(struct run_softc *, struct mbuf *,
struct ieee80211_node *,
const struct ieee80211_bpf_params *);
static int run_raw_xmit(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_bpf_params *);
static void run_start(struct ifnet *);
static int run_ioctl(struct ifnet *, u_long, caddr_t);
static void run_set_agc(struct run_softc *, uint8_t);
static void run_select_chan_group(struct run_softc *, int);
static void run_set_rx_antenna(struct run_softc *, int);
static void run_rt2870_set_chan(struct run_softc *, u_int);
static void run_rt3070_set_chan(struct run_softc *, u_int);
static void run_rt3572_set_chan(struct run_softc *, u_int);
static int run_set_chan(struct run_softc *, struct ieee80211_channel *);
static void run_set_channel(struct ieee80211com *);
static void run_scan_start(struct ieee80211com *);
static void run_scan_end(struct ieee80211com *);
static void run_update_beacon(struct ieee80211vap *, int);
static void run_update_beacon_cb(void *);
static void run_updateprot(struct ieee80211com *);
static void run_updateprot_cb(void *);
static void run_usb_timeout_cb(void *);
static void run_reset_livelock(struct run_softc *);
static void run_enable_tsf_sync(struct run_softc *);
static void run_enable_mrr(struct run_softc *);
static void run_set_txpreamble(struct run_softc *);
static void run_set_basicrates(struct run_softc *);
static void run_set_leds(struct run_softc *, uint16_t);
static void run_set_bssid(struct run_softc *, const uint8_t *);
static void run_set_macaddr(struct run_softc *, const uint8_t *);
static void run_updateslot(struct ifnet *);
static void run_updateslot_cb(void *);
static void run_update_mcast(struct ifnet *);
static int8_t run_rssi2dbm(struct run_softc *, uint8_t, uint8_t);
static void run_update_promisc_locked(struct ifnet *);
static void run_update_promisc(struct ifnet *);
static int run_bbp_init(struct run_softc *);
static int run_rt3070_rf_init(struct run_softc *);
static int run_rt3070_filter_calib(struct run_softc *, uint8_t, uint8_t,
uint8_t *);
static void run_rt3070_rf_setup(struct run_softc *);
static int run_txrx_enable(struct run_softc *);
static void run_init(void *);
static void run_init_locked(struct run_softc *);
static void run_stop(void *);
static void run_delay(struct run_softc *, unsigned int);
static const struct {
uint16_t reg;
uint32_t val;
} rt2870_def_mac[] = {
RT2870_DEF_MAC
};
static const struct {
uint8_t reg;
uint8_t val;
} rt2860_def_bbp[] = {
RT2860_DEF_BBP
};
static const struct rfprog {
uint8_t chan;
uint32_t r1, r2, r3, r4;
} rt2860_rf2850[] = {
RT2860_RF2850
};
struct {
uint8_t n, r, k;
} rt3070_freqs[] = {
RT3070_RF3052
};
static const struct {
uint8_t reg;
uint8_t val;
} rt3070_def_rf[] = {
RT3070_DEF_RF
},rt3572_def_rf[] = {
RT3572_DEF_RF
};
static const struct usb_config run_config[RUN_N_XFER] = {
[RUN_BULK_TX_BE] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.ep_index = 0,
.direction = UE_DIR_OUT,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = run_bulk_tx_callback0,
.timeout = 5000, /* ms */
},
[RUN_BULK_TX_BK] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.ep_index = 1,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = run_bulk_tx_callback1,
.timeout = 5000, /* ms */
},
[RUN_BULK_TX_VI] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.ep_index = 2,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = run_bulk_tx_callback2,
.timeout = 5000, /* ms */
},
[RUN_BULK_TX_VO] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.ep_index = 3,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
.callback = run_bulk_tx_callback3,
.timeout = 5000, /* ms */
},
[RUN_BULK_TX_HCCA] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.ep_index = 4,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,},
.callback = run_bulk_tx_callback4,
.timeout = 5000, /* ms */
},
[RUN_BULK_TX_PRIO] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_OUT,
.ep_index = 5,
.bufsize = RUN_MAX_TXSZ,
.flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,},
.callback = run_bulk_tx_callback5,
.timeout = 5000, /* ms */
},
[RUN_BULK_RX] = {
.type = UE_BULK,
.endpoint = UE_ADDR_ANY,
.direction = UE_DIR_IN,
.bufsize = RUN_MAX_RXSZ,
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
.callback = run_bulk_rx_callback,
}
};
static int
run_match(device_t self)
{
struct usb_attach_arg *uaa = device_get_ivars(self);
if (uaa->usb_mode != USB_MODE_HOST)
return (ENXIO);
if (uaa->info.bConfigIndex != 0)
return (ENXIO);
if (uaa->info.bIfaceIndex != RT2860_IFACE_INDEX)
return (ENXIO);
return (usbd_lookup_id_by_uaa(run_devs, sizeof(run_devs), uaa));
}
static int
run_attach(device_t self)
{
struct run_softc *sc = device_get_softc(self);
struct usb_attach_arg *uaa = device_get_ivars(self);
struct ieee80211com *ic;
struct ifnet *ifp;
uint32_t ver;
int i, ntries, error;
uint8_t iface_index, bands;
device_set_usb_desc(self);
sc->sc_udev = uaa->device;
sc->sc_dev = self;
mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev),
MTX_NETWORK_LOCK, MTX_DEF);
iface_index = RT2860_IFACE_INDEX;
error = usbd_transfer_setup(uaa->device, &iface_index,
sc->sc_xfer, run_config, RUN_N_XFER, sc, &sc->sc_mtx);
if (error) {
device_printf(self, "could not allocate USB transfers, "
"err=%s\n", usbd_errstr(error));
goto detach;
}
RUN_LOCK(sc);
/* wait for the chip to settle */
for (ntries = 0; ntries < 100; ntries++) {
if (run_read(sc, RT2860_ASIC_VER_ID, &ver) != 0) {
RUN_UNLOCK(sc);
goto detach;
}
if (ver != 0 && ver != 0xffffffff)
break;
run_delay(sc, 10);
}
if (ntries == 100) {
device_printf(sc->sc_dev,
"timeout waiting for NIC to initialize\n");
RUN_UNLOCK(sc);
goto detach;
}
sc->mac_ver = ver >> 16;
sc->mac_rev = ver & 0xffff;
/* retrieve RF rev. no and various other things from EEPROM */
run_read_eeprom(sc);
device_printf(sc->sc_dev,
"MAC/BBP RT%04X (rev 0x%04X), RF %s (MIMO %dT%dR), address %s\n",
sc->mac_ver, sc->mac_rev, run_get_rf(sc->rf_rev),
sc->ntxchains, sc->nrxchains, ether_sprintf(sc->sc_bssid));
RUN_UNLOCK(sc);
ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
if (ifp == NULL) {
device_printf(sc->sc_dev, "can not if_alloc()\n");
goto detach;
}
ic = ifp->if_l2com;
ifp->if_softc = sc;
if_initname(ifp, "run", device_get_unit(sc->sc_dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = run_init;
ifp->if_ioctl = run_ioctl;
ifp->if_start = run_start;
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
IFQ_SET_READY(&ifp->if_snd);
ic->ic_ifp = ifp;
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */
/* set device capabilities */
ic->ic_caps =
IEEE80211_C_STA | /* station mode supported */
IEEE80211_C_MONITOR | /* monitor mode supported */
IEEE80211_C_IBSS |
IEEE80211_C_HOSTAP |
IEEE80211_C_WDS | /* 4-address traffic works */
IEEE80211_C_MBSS |
IEEE80211_C_SHPREAMBLE | /* short preamble supported */
IEEE80211_C_SHSLOT | /* short slot time supported */
IEEE80211_C_WME | /* WME */
IEEE80211_C_WPA; /* WPA1|WPA2(RSN) */
ic->ic_cryptocaps =
IEEE80211_CRYPTO_WEP |
IEEE80211_CRYPTO_AES_CCM |
IEEE80211_CRYPTO_TKIPMIC |
IEEE80211_CRYPTO_TKIP;
ic->ic_flags |= IEEE80211_F_DATAPAD;
ic->ic_flags_ext |= IEEE80211_FEXT_SWBMISS;
bands = 0;
setbit(&bands, IEEE80211_MODE_11B);
setbit(&bands, IEEE80211_MODE_11G);
ieee80211_init_channels(ic, NULL, &bands);
/*
* Do this by own because h/w supports
* more channels than ieee80211_init_channels()
*/
if (sc->rf_rev == RT2860_RF_2750 ||
sc->rf_rev == RT2860_RF_2850 ||
sc->rf_rev == RT3070_RF_3052) {
/* set supported .11a rates */
for (i = 14; i < N(rt2860_rf2850); i++) {
uint8_t chan = rt2860_rf2850[i].chan;
ic->ic_channels[ic->ic_nchans].ic_freq =
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A);
ic->ic_channels[ic->ic_nchans].ic_ieee = chan;
ic->ic_channels[ic->ic_nchans].ic_flags = IEEE80211_CHAN_A;
ic->ic_channels[ic->ic_nchans].ic_extieee = 0;
ic->ic_nchans++;
}
}
ieee80211_ifattach(ic, sc->sc_bssid);
ic->ic_scan_start = run_scan_start;
ic->ic_scan_end = run_scan_end;
ic->ic_set_channel = run_set_channel;
ic->ic_node_alloc = run_node_alloc;
ic->ic_newassoc = run_newassoc;
ic->ic_updateslot = run_updateslot;
ic->ic_update_mcast = run_update_mcast;
ic->ic_wme.wme_update = run_wme_update;
ic->ic_raw_xmit = run_raw_xmit;
ic->ic_update_promisc = run_update_promisc;
ic->ic_vap_create = run_vap_create;
ic->ic_vap_delete = run_vap_delete;
ieee80211_radiotap_attach(ic,
&sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
RUN_TX_RADIOTAP_PRESENT,
&sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
RUN_RX_RADIOTAP_PRESENT);
TASK_INIT(&sc->cmdq_task, 0, run_cmdq_cb, sc);
TASK_INIT(&sc->ratectl_task, 0, run_ratectl_cb, sc);
callout_init((struct callout *)&sc->ratectl_ch, 1);
if (bootverbose)
ieee80211_announce(ic);
return (0);
detach:
run_detach(self);
return (ENXIO);
}
static int
run_detach(device_t self)
{
struct run_softc *sc = device_get_softc(self);
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic;
int i;
/* stop all USB transfers */
usbd_transfer_unsetup(sc->sc_xfer, RUN_N_XFER);
RUN_LOCK(sc);
sc->ratectl_run = RUN_RATECTL_OFF;
sc->cmdq_run = sc->cmdq_key_set = RUN_CMDQ_ABORT;
/* free TX list, if any */
for (i = 0; i != RUN_EP_QUEUES; i++)
run_unsetup_tx_list(sc, &sc->sc_epq[i]);
RUN_UNLOCK(sc);
if (ifp) {
ic = ifp->if_l2com;
/* drain tasks */
usb_callout_drain(&sc->ratectl_ch);
ieee80211_draintask(ic, &sc->cmdq_task);
ieee80211_draintask(ic, &sc->ratectl_task);
ieee80211_ifdetach(ic);
if_free(ifp);
}
mtx_destroy(&sc->sc_mtx);
return (0);
}
static struct ieee80211vap *
run_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
enum ieee80211_opmode opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ifnet *ifp = ic->ic_ifp;
struct run_softc *sc = ifp->if_softc;
struct run_vap *rvp;
struct ieee80211vap *vap;
int i;
if (sc->rvp_cnt >= RUN_VAP_MAX) {
if_printf(ifp, "number of VAPs maxed out\n");
return (NULL);
}
switch (opmode) {
case IEEE80211_M_STA:
/* enable s/w bmiss handling for sta mode */
flags |= IEEE80211_CLONE_NOBEACONS;
/* fall though */
case IEEE80211_M_IBSS:
case IEEE80211_M_MONITOR:
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
/* other than WDS vaps, only one at a time */
if (!TAILQ_EMPTY(&ic->ic_vaps))
return (NULL);
break;
case IEEE80211_M_WDS:
TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next){
if(vap->iv_opmode != IEEE80211_M_HOSTAP)
continue;
/* WDS vap's always share the local mac address. */
flags &= ~IEEE80211_CLONE_BSSID;
break;
}
if (vap == NULL) {
if_printf(ifp, "wds only supported in ap mode\n");
return (NULL);
}
break;
default:
if_printf(ifp, "unknown opmode %d\n", opmode);
return (NULL);
}
rvp = (struct run_vap *) malloc(sizeof(struct run_vap),
M_80211_VAP, M_NOWAIT | M_ZERO);
if (rvp == NULL)
return (NULL);
vap = &rvp->vap;
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac);
vap->iv_key_update_begin = run_key_update_begin;
vap->iv_key_update_end = run_key_update_end;
vap->iv_update_beacon = run_update_beacon;
vap->iv_max_aid = RT2870_WCID_MAX;
/*
* To delete the right key from h/w, we need wcid.
* Luckily, there is unused space in ieee80211_key{}, wk_pad,
* and matching wcid will be written into there. So, cast
* some spells to remove 'const' from ieee80211_key{}
*/
vap->iv_key_delete = (void *)run_key_delete;
vap->iv_key_set = (void *)run_key_set;
/* override state transition machine */
rvp->newstate = vap->iv_newstate;
vap->iv_newstate = run_newstate;
ieee80211_ratectl_init(vap);
ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */);
/* complete setup */
ieee80211_vap_attach(vap, run_media_change, ieee80211_media_status);
/* make sure id is always unique */
for (i = 0; i < RUN_VAP_MAX; i++) {
if((sc->rvp_bmap & 1 << i) == 0){
sc->rvp_bmap |= 1 << i;
rvp->rvp_id = i;
break;
}
}
if (sc->rvp_cnt++ == 0)
ic->ic_opmode = opmode;
if (opmode == IEEE80211_M_HOSTAP)
sc->cmdq_run = RUN_CMDQ_GO;
DPRINTF("rvp_id=%d bmap=%x rvp_cnt=%d\n",
rvp->rvp_id, sc->rvp_bmap, sc->rvp_cnt);
return (vap);
}
static void
run_vap_delete(struct ieee80211vap *vap)
{
struct run_vap *rvp = RUN_VAP(vap);
struct ifnet *ifp;
struct ieee80211com *ic;
struct run_softc *sc;
uint8_t rvp_id;
if (vap == NULL)
return;
ic = vap->iv_ic;
ifp = ic->ic_ifp;
sc = ifp->if_softc;
RUN_LOCK(sc);
m_freem(rvp->beacon_mbuf);
rvp->beacon_mbuf = NULL;
rvp_id = rvp->rvp_id;
sc->ratectl_run &= ~(1 << rvp_id);
sc->rvp_bmap &= ~(1 << rvp_id);
run_set_region_4(sc, RT2860_SKEY(rvp_id, 0), 0, 128);
run_set_region_4(sc, RT2860_BCN_BASE(rvp_id), 0, 512);
--sc->rvp_cnt;
DPRINTF("vap=%p rvp_id=%d bmap=%x rvp_cnt=%d\n",
vap, rvp_id, sc->rvp_bmap, sc->rvp_cnt);
RUN_UNLOCK(sc);
ieee80211_ratectl_deinit(vap);
ieee80211_vap_detach(vap);
free(rvp, M_80211_VAP);
}
/*
* There are numbers of functions need to be called in context thread.
* Rather than creating taskqueue event for each of those functions,
* here is all-for-one taskqueue callback function. This function
* gurantees deferred functions are executed in the same order they
* were enqueued.
* '& RUN_CMDQ_MASQ' is to loop cmdq[].
*/
static void
run_cmdq_cb(void *arg, int pending)
{
struct run_softc *sc = arg;
uint8_t i;
/* call cmdq[].func locked */
RUN_LOCK(sc);
for (i = sc->cmdq_exec; sc->cmdq[i].func && pending;
i = sc->cmdq_exec, pending--) {
DPRINTFN(6, "cmdq_exec=%d pending=%d\n", i, pending);
if (sc->cmdq_run == RUN_CMDQ_GO) {
/*
* If arg0 is NULL, callback func needs more
* than one arg. So, pass ptr to cmdq struct.
*/
if (sc->cmdq[i].arg0)
sc->cmdq[i].func(sc->cmdq[i].arg0);
else
sc->cmdq[i].func(&sc->cmdq[i]);
}
sc->cmdq[i].arg0 = NULL;
sc->cmdq[i].func = NULL;
sc->cmdq_exec++;
sc->cmdq_exec &= RUN_CMDQ_MASQ;
}
RUN_UNLOCK(sc);
}
static void
run_setup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq)
{
struct run_tx_data *data;
memset(pq, 0, sizeof(*pq));
STAILQ_INIT(&pq->tx_qh);
STAILQ_INIT(&pq->tx_fh);
for (data = &pq->tx_data[0];
data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) {
data->sc = sc;
STAILQ_INSERT_TAIL(&pq->tx_fh, data, next);
}
pq->tx_nfree = RUN_TX_RING_COUNT;
}
static void
run_unsetup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq)
{
struct run_tx_data *data;
/* make sure any subsequent use of the queues will fail */
pq->tx_nfree = 0;
STAILQ_INIT(&pq->tx_fh);
STAILQ_INIT(&pq->tx_qh);
/* free up all node references and mbufs */
for (data = &pq->tx_data[0];
data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) {
if (data->m != NULL) {
m_freem(data->m);
data->m = NULL;
}
if (data->ni != NULL) {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
}
}
static int
run_load_microcode(struct run_softc *sc)
{
usb_device_request_t req;
const struct firmware *fw;
const u_char *base;
uint32_t tmp;
int ntries, error;
const uint64_t *temp;
uint64_t bytes;
RUN_UNLOCK(sc);
fw = firmware_get("runfw");
RUN_LOCK(sc);
if (fw == NULL) {
device_printf(sc->sc_dev,
"failed loadfirmware of file %s\n", "runfw");
return ENOENT;
}
if (fw->datasize != 8192) {
device_printf(sc->sc_dev,
"invalid firmware size (should be 8KB)\n");
error = EINVAL;
goto fail;
}
/*
* RT3071/RT3072 use a different firmware
* run-rt2870 (8KB) contains both,
* first half (4KB) is for rt2870,
* last half is for rt3071.
*/
base = fw->data;
if ((sc->mac_ver) != 0x2860 &&
(sc->mac_ver) != 0x2872 &&
(sc->mac_ver) != 0x3070) {
base += 4096;
}
/* cheap sanity check */
temp = fw->data;
bytes = *temp;
if (bytes != be64toh(0xffffff0210280210)) {
device_printf(sc->sc_dev, "firmware checksum failed\n");
error = EINVAL;
goto fail;
}
run_read(sc, RT2860_ASIC_VER_ID, &tmp);
/* write microcode image */
run_write_region_1(sc, RT2870_FW_BASE, base, 4096);
run_write(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff);
run_write(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff);
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = RT2870_RESET;
USETW(req.wValue, 8);
USETW(req.wIndex, 0);
USETW(req.wLength, 0);
if ((error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL))
!= 0) {
device_printf(sc->sc_dev, "firmware reset failed\n");
goto fail;
}
run_delay(sc, 10);
run_write(sc, RT2860_H2M_MAILBOX, 0);
if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0)) != 0)
goto fail;
/* wait until microcontroller is ready */
for (ntries = 0; ntries < 1000; ntries++) {
if ((error = run_read(sc, RT2860_SYS_CTRL, &tmp)) != 0) {
goto fail;
}
if (tmp & RT2860_MCU_READY)
break;
run_delay(sc, 10);
}
if (ntries == 1000) {
device_printf(sc->sc_dev,
"timeout waiting for MCU to initialize\n");
error = ETIMEDOUT;
goto fail;
}
device_printf(sc->sc_dev, "firmware %s ver. %u.%u loaded\n",
(base == fw->data) ? "RT2870" : "RT3071",
*(base + 4092), *(base + 4093));
fail:
firmware_put(fw, FIRMWARE_UNLOAD);
return (error);
}
int
run_reset(struct run_softc *sc)
{
usb_device_request_t req;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = RT2870_RESET;
USETW(req.wValue, 1);
USETW(req.wIndex, 0);
USETW(req.wLength, 0);
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL));
}
static usb_error_t
run_do_request(struct run_softc *sc,
struct usb_device_request *req, void *data)
{
usb_error_t err;
int ntries = 10;
RUN_LOCK_ASSERT(sc, MA_OWNED);
while (ntries--) {
err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx,
req, data, 0, NULL, 250 /* ms */);
if (err == 0)
break;
DPRINTFN(1, "Control request failed, %s (retrying)\n",
usbd_errstr(err));
run_delay(sc, 10);
}
return (err);
}
static int
run_read(struct run_softc *sc, uint16_t reg, uint32_t *val)
{
uint32_t tmp;
int error;
error = run_read_region_1(sc, reg, (uint8_t *)&tmp, sizeof tmp);
if (error == 0)
*val = le32toh(tmp);
else
*val = 0xffffffff;
return (error);
}
static int
run_read_region_1(struct run_softc *sc, uint16_t reg, uint8_t *buf, int len)
{
usb_device_request_t req;
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = RT2870_READ_REGION_1;
USETW(req.wValue, 0);
USETW(req.wIndex, reg);
USETW(req.wLength, len);
return (run_do_request(sc, &req, buf));
}
static int
run_write_2(struct run_softc *sc, uint16_t reg, uint16_t val)
{
usb_device_request_t req;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = RT2870_WRITE_2;
USETW(req.wValue, val);
USETW(req.wIndex, reg);
USETW(req.wLength, 0);
return (run_do_request(sc, &req, NULL));
}
static int
run_write(struct run_softc *sc, uint16_t reg, uint32_t val)
{
int error;
if ((error = run_write_2(sc, reg, val & 0xffff)) == 0)
error = run_write_2(sc, reg + 2, val >> 16);
return (error);
}
static int
run_write_region_1(struct run_softc *sc, uint16_t reg, const uint8_t *buf,
int len)
{
#if 1
int i, error = 0;
/*
* NB: the WRITE_REGION_1 command is not stable on RT2860.
* We thus issue multiple WRITE_2 commands instead.
*/
KASSERT((len & 1) == 0, ("run_write_region_1: Data too long.\n"));
for (i = 0; i < len && error == 0; i += 2)
error = run_write_2(sc, reg + i, buf[i] | buf[i + 1] << 8);
return (error);
#else
usb_device_request_t req;
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = RT2870_WRITE_REGION_1;
USETW(req.wValue, 0);
USETW(req.wIndex, reg);
USETW(req.wLength, len);
return (run_do_request(sc, &req, buf));
#endif
}
static int
run_set_region_4(struct run_softc *sc, uint16_t reg, uint32_t val, int len)
{
int i, error = 0;
KASSERT((len & 3) == 0, ("run_set_region_4: Invalid data length.\n"));
for (i = 0; i < len && error == 0; i += 4)
error = run_write(sc, reg + i, val);
return (error);
}
/* Read 16-bit from eFUSE ROM (RT3070 only.) */
static int
run_efuse_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val)
{
uint32_t tmp;
uint16_t reg;
int error, ntries;
if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0)
return (error);
addr *= 2;
/*-
* Read one 16-byte block into registers EFUSE_DATA[0-3]:
* DATA0: F E D C
* DATA1: B A 9 8
* DATA2: 7 6 5 4
* DATA3: 3 2 1 0
*/
tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK);
tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK;
run_write(sc, RT3070_EFUSE_CTRL, tmp);
for (ntries = 0; ntries < 100; ntries++) {
if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0)
return (error);
if (!(tmp & RT3070_EFSROM_KICK))
break;
run_delay(sc, 2);
}
if (ntries == 100)
return (ETIMEDOUT);
if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK) {
*val = 0xffff; /* address not found */
return (0);
}
/* determine to which 32-bit register our 16-bit word belongs */
reg = RT3070_EFUSE_DATA3 - (addr & 0xc);
if ((error = run_read(sc, reg, &tmp)) != 0)
return (error);
*val = (addr & 2) ? tmp >> 16 : tmp & 0xffff;
return (0);
}
static int
run_eeprom_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val)
{
usb_device_request_t req;
uint16_t tmp;
int error;
addr *= 2;
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = RT2870_EEPROM_READ;
USETW(req.wValue, 0);
USETW(req.wIndex, addr);
USETW(req.wLength, sizeof tmp);
error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, &tmp);
if (error == 0)
*val = le16toh(tmp);
else
*val = 0xffff;
return (error);
}
static __inline int
run_srom_read(struct run_softc *sc, uint16_t addr, uint16_t *val)
{
/* either eFUSE ROM or EEPROM */
return sc->sc_srom_read(sc, addr, val);
}
static int
run_rt2870_rf_write(struct run_softc *sc, uint8_t reg, uint32_t val)
{
uint32_t tmp;
int error, ntries;
for (ntries = 0; ntries < 10; ntries++) {
if ((error = run_read(sc, RT2860_RF_CSR_CFG0, &tmp)) != 0)
return (error);
if (!(tmp & RT2860_RF_REG_CTRL))
break;
}
if (ntries == 10)
return (ETIMEDOUT);
/* RF registers are 24-bit on the RT2860 */
tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT |
(val & 0x3fffff) << 2 | (reg & 3);
return (run_write(sc, RT2860_RF_CSR_CFG0, tmp));
}
static int
run_rt3070_rf_read(struct run_softc *sc, uint8_t reg, uint8_t *val)
{
uint32_t tmp;
int error, ntries;
for (ntries = 0; ntries < 100; ntries++) {
if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT3070_RF_KICK))
break;
}
if (ntries == 100)
return (ETIMEDOUT);
tmp = RT3070_RF_KICK | reg << 8;
if ((error = run_write(sc, RT3070_RF_CSR_CFG, tmp)) != 0)
return (error);
for (ntries = 0; ntries < 100; ntries++) {
if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT3070_RF_KICK))
break;
}
if (ntries == 100)
return (ETIMEDOUT);
*val = tmp & 0xff;
return (0);
}
static int
run_rt3070_rf_write(struct run_softc *sc, uint8_t reg, uint8_t val)
{
uint32_t tmp;
int error, ntries;
for (ntries = 0; ntries < 10; ntries++) {
if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT3070_RF_KICK))
break;
}
if (ntries == 10)
return (ETIMEDOUT);
tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val;
return (run_write(sc, RT3070_RF_CSR_CFG, tmp));
}
static int
run_bbp_read(struct run_softc *sc, uint8_t reg, uint8_t *val)
{
uint32_t tmp;
int ntries, error;
for (ntries = 0; ntries < 10; ntries++) {
if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT2860_BBP_CSR_KICK))
break;
}
if (ntries == 10)
return (ETIMEDOUT);
tmp = RT2860_BBP_CSR_READ | RT2860_BBP_CSR_KICK | reg << 8;
if ((error = run_write(sc, RT2860_BBP_CSR_CFG, tmp)) != 0)
return (error);
for (ntries = 0; ntries < 10; ntries++) {
if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT2860_BBP_CSR_KICK))
break;
}
if (ntries == 10)
return (ETIMEDOUT);
*val = tmp & 0xff;
return (0);
}
static int
run_bbp_write(struct run_softc *sc, uint8_t reg, uint8_t val)
{
uint32_t tmp;
int ntries, error;
for (ntries = 0; ntries < 10; ntries++) {
if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0)
return (error);
if (!(tmp & RT2860_BBP_CSR_KICK))
break;
}
if (ntries == 10)
return (ETIMEDOUT);
tmp = RT2860_BBP_CSR_KICK | reg << 8 | val;
return (run_write(sc, RT2860_BBP_CSR_CFG, tmp));
}
/*
* Send a command to the 8051 microcontroller unit.
*/
static int
run_mcu_cmd(struct run_softc *sc, uint8_t cmd, uint16_t arg)
{
uint32_t tmp;
int error, ntries;
for (ntries = 0; ntries < 100; ntries++) {
if ((error = run_read(sc, RT2860_H2M_MAILBOX, &tmp)) != 0)
return error;
if (!(tmp & RT2860_H2M_BUSY))
break;
}
if (ntries == 100)
return ETIMEDOUT;
tmp = RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg;
if ((error = run_write(sc, RT2860_H2M_MAILBOX, tmp)) == 0)
error = run_write(sc, RT2860_HOST_CMD, cmd);
return (error);
}
/*
* Add `delta' (signed) to each 4-bit sub-word of a 32-bit word.
* Used to adjust per-rate Tx power registers.
*/
static __inline uint32_t
b4inc(uint32_t b32, int8_t delta)
{
int8_t i, b4;
for (i = 0; i < 8; i++) {
b4 = b32 & 0xf;
b4 += delta;
if (b4 < 0)
b4 = 0;
else if (b4 > 0xf)
b4 = 0xf;
b32 = b32 >> 4 | b4 << 28;
}
return (b32);
}
static const char *
run_get_rf(int rev)
{
switch (rev) {
case RT2860_RF_2820: return "RT2820";
case RT2860_RF_2850: return "RT2850";
case RT2860_RF_2720: return "RT2720";
case RT2860_RF_2750: return "RT2750";
case RT3070_RF_3020: return "RT3020";
case RT3070_RF_2020: return "RT2020";
case RT3070_RF_3021: return "RT3021";
case RT3070_RF_3022: return "RT3022";
case RT3070_RF_3052: return "RT3052";
}
return ("unknown");
}
int
run_read_eeprom(struct run_softc *sc)
{
int8_t delta_2ghz, delta_5ghz;
uint32_t tmp;
uint16_t val;
int ridx, ant, i;
/* check whether the ROM is eFUSE ROM or EEPROM */
sc->sc_srom_read = run_eeprom_read_2;
if (sc->mac_ver >= 0x3070) {
run_read(sc, RT3070_EFUSE_CTRL, &tmp);
DPRINTF("EFUSE_CTRL=0x%08x\n", tmp);
if (tmp & RT3070_SEL_EFUSE)
sc->sc_srom_read = run_efuse_read_2;
}
/* read ROM version */
run_srom_read(sc, RT2860_EEPROM_VERSION, &val);
DPRINTF("EEPROM rev=%d, FAE=%d\n", val & 0xff, val >> 8);
/* read MAC address */
run_srom_read(sc, RT2860_EEPROM_MAC01, &val);
sc->sc_bssid[0] = val & 0xff;
sc->sc_bssid[1] = val >> 8;
run_srom_read(sc, RT2860_EEPROM_MAC23, &val);
sc->sc_bssid[2] = val & 0xff;
sc->sc_bssid[3] = val >> 8;
run_srom_read(sc, RT2860_EEPROM_MAC45, &val);
sc->sc_bssid[4] = val & 0xff;
sc->sc_bssid[5] = val >> 8;
/* read vender BBP settings */
for (i = 0; i < 10; i++) {
run_srom_read(sc, RT2860_EEPROM_BBP_BASE + i, &val);
sc->bbp[i].val = val & 0xff;
sc->bbp[i].reg = val >> 8;
DPRINTF("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val);
}
if (sc->mac_ver >= 0x3071) {
/* read vendor RF settings */
for (i = 0; i < 10; i++) {
run_srom_read(sc, RT3071_EEPROM_RF_BASE + i, &val);
sc->rf[i].val = val & 0xff;
sc->rf[i].reg = val >> 8;
DPRINTF("RF%d=0x%02x\n", sc->rf[i].reg,
sc->rf[i].val);
}
}
/* read RF frequency offset from EEPROM */
run_srom_read(sc, RT2860_EEPROM_FREQ_LEDS, &val);
sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0;
DPRINTF("EEPROM freq offset %d\n", sc->freq & 0xff);
if (val >> 8 != 0xff) {
/* read LEDs operating mode */
sc->leds = val >> 8;
run_srom_read(sc, RT2860_EEPROM_LED1, &sc->led[0]);
run_srom_read(sc, RT2860_EEPROM_LED2, &sc->led[1]);
run_srom_read(sc, RT2860_EEPROM_LED3, &sc->led[2]);
} else {
/* broken EEPROM, use default settings */
sc->leds = 0x01;
sc->led[0] = 0x5555;
sc->led[1] = 0x2221;
sc->led[2] = 0x5627; /* differs from RT2860 */
}
DPRINTF("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n",
sc->leds, sc->led[0], sc->led[1], sc->led[2]);
/* read RF information */
run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val);
if (val == 0xffff) {
DPRINTF("invalid EEPROM antenna info, using default\n");
if (sc->mac_ver == 0x3572) {
/* default to RF3052 2T2R */
sc->rf_rev = RT3070_RF_3052;
sc->ntxchains = 2;
sc->nrxchains = 2;
} else if (sc->mac_ver >= 0x3070) {
/* default to RF3020 1T1R */
sc->rf_rev = RT3070_RF_3020;
sc->ntxchains = 1;
sc->nrxchains = 1;
} else {
/* default to RF2820 1T2R */
sc->rf_rev = RT2860_RF_2820;
sc->ntxchains = 1;
sc->nrxchains = 2;
}
} else {
sc->rf_rev = (val >> 8) & 0xf;
sc->ntxchains = (val >> 4) & 0xf;
sc->nrxchains = val & 0xf;
}
DPRINTF("EEPROM RF rev=0x%02x chains=%dT%dR\n",
sc->rf_rev, sc->ntxchains, sc->nrxchains);
/* check if RF supports automatic Tx access gain control */
run_srom_read(sc, RT2860_EEPROM_CONFIG, &val);
DPRINTF("EEPROM CFG 0x%04x\n", val);
/* check if driver should patch the DAC issue */
if ((val >> 8) != 0xff)
sc->patch_dac = (val >> 15) & 1;
if ((val & 0xff) != 0xff) {
sc->ext_5ghz_lna = (val >> 3) & 1;
sc->ext_2ghz_lna = (val >> 2) & 1;
/* check if RF supports automatic Tx access gain control */
sc->calib_2ghz = sc->calib_5ghz = (val >> 1) & 1;
/* check if we have a hardware radio switch */
sc->rfswitch = val & 1;
}
/* read power settings for 2GHz channels */
for (i = 0; i < 14; i += 2) {
run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2, &val);
sc->txpow1[i + 0] = (int8_t)(val & 0xff);
sc->txpow1[i + 1] = (int8_t)(val >> 8);
run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2, &val);
sc->txpow2[i + 0] = (int8_t)(val & 0xff);
sc->txpow2[i + 1] = (int8_t)(val >> 8);
}
/* fix broken Tx power entries */
for (i = 0; i < 14; i++) {
if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31)
sc->txpow1[i] = 5;
if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31)
sc->txpow2[i] = 5;
DPRINTF("chan %d: power1=%d, power2=%d\n",
rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]);
}
/* read power settings for 5GHz channels */
for (i = 0; i < 40; i += 2) {
run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2, &val);
sc->txpow1[i + 14] = (int8_t)(val & 0xff);
sc->txpow1[i + 15] = (int8_t)(val >> 8);
run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2, &val);
sc->txpow2[i + 14] = (int8_t)(val & 0xff);
sc->txpow2[i + 15] = (int8_t)(val >> 8);
}
/* fix broken Tx power entries */
for (i = 0; i < 40; i++) {
if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15)
sc->txpow1[14 + i] = 5;
if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15)
sc->txpow2[14 + i] = 5;
DPRINTF("chan %d: power1=%d, power2=%d\n",
rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i],
sc->txpow2[14 + i]);
}
/* read Tx power compensation for each Tx rate */
run_srom_read(sc, RT2860_EEPROM_DELTAPWR, &val);
delta_2ghz = delta_5ghz = 0;
if ((val & 0xff) != 0xff && (val & 0x80)) {
delta_2ghz = val & 0xf;
if (!(val & 0x40)) /* negative number */
delta_2ghz = -delta_2ghz;
}
val >>= 8;
if ((val & 0xff) != 0xff && (val & 0x80)) {
delta_5ghz = val & 0xf;
if (!(val & 0x40)) /* negative number */
delta_5ghz = -delta_5ghz;
}
DPRINTF("power compensation=%d (2GHz), %d (5GHz)\n",
delta_2ghz, delta_5ghz);
for (ridx = 0; ridx < 5; ridx++) {
uint32_t reg;
run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2, &val);
reg = val;
run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1, &val);
reg |= (uint32_t)val << 16;
sc->txpow20mhz[ridx] = reg;
sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz);
sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz);
DPRINTF("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, "
"40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx],
sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]);
}
/* read RSSI offsets and LNA gains from EEPROM */
run_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ, &val);
sc->rssi_2ghz[0] = val & 0xff; /* Ant A */
sc->rssi_2ghz[1] = val >> 8; /* Ant B */
run_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ, &val);
if (sc->mac_ver >= 0x3070) {
/*
* On RT3070 chips (limited to 2 Rx chains), this ROM
* field contains the Tx mixer gain for the 2GHz band.
*/
if ((val & 0xff) != 0xff)
sc->txmixgain_2ghz = val & 0x7;
DPRINTF("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz);
} else
sc->rssi_2ghz[2] = val & 0xff; /* Ant C */
sc->lna[2] = val >> 8; /* channel group 2 */
run_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ, &val);
sc->rssi_5ghz[0] = val & 0xff; /* Ant A */
sc->rssi_5ghz[1] = val >> 8; /* Ant B */
run_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ, &val);
if (sc->mac_ver == 0x3572) {
/*
* On RT3572 chips (limited to 2 Rx chains), this ROM
* field contains the Tx mixer gain for the 5GHz band.
*/
if ((val & 0xff) != 0xff)
sc->txmixgain_5ghz = val & 0x7;
DPRINTF("tx mixer gain=%u (5GHz)\n", sc->txmixgain_5ghz);
} else
sc->rssi_5ghz[2] = val & 0xff; /* Ant C */
sc->lna[3] = val >> 8; /* channel group 3 */
run_srom_read(sc, RT2860_EEPROM_LNA, &val);
sc->lna[0] = val & 0xff; /* channel group 0 */
sc->lna[1] = val >> 8; /* channel group 1 */
/* fix broken 5GHz LNA entries */
if (sc->lna[2] == 0 || sc->lna[2] == 0xff) {
DPRINTF("invalid LNA for channel group %d\n", 2);
sc->lna[2] = sc->lna[1];
}
if (sc->lna[3] == 0 || sc->lna[3] == 0xff) {
DPRINTF("invalid LNA for channel group %d\n", 3);
sc->lna[3] = sc->lna[1];
}
/* fix broken RSSI offset entries */
for (ant = 0; ant < 3; ant++) {
if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) {
DPRINTF("invalid RSSI%d offset: %d (2GHz)\n",
ant + 1, sc->rssi_2ghz[ant]);
sc->rssi_2ghz[ant] = 0;
}
if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) {
DPRINTF("invalid RSSI%d offset: %d (5GHz)\n",
ant + 1, sc->rssi_5ghz[ant]);
sc->rssi_5ghz[ant] = 0;
}
}
return (0);
}
static struct ieee80211_node *
run_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
{
return malloc(sizeof (struct run_node), M_DEVBUF, M_NOWAIT | M_ZERO);
}
static int
run_media_change(struct ifnet *ifp)
{
struct ieee80211vap *vap = ifp->if_softc;
struct ieee80211com *ic = vap->iv_ic;
const struct ieee80211_txparam *tp;
struct run_softc *sc = ic->ic_ifp->if_softc;
uint8_t rate, ridx;
int error;
RUN_LOCK(sc);
error = ieee80211_media_change(ifp);
if (error != ENETRESET) {
RUN_UNLOCK(sc);
return (error);
}
tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
struct ieee80211_node *ni;
struct run_node *rn;
rate = ic->ic_sup_rates[ic->ic_curmode].
rs_rates[tp->ucastrate] & IEEE80211_RATE_VAL;
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
ni = ieee80211_ref_node(vap->iv_bss);
rn = (struct run_node *)ni;
rn->fix_ridx = ridx;
DPRINTF("rate=%d, fix_ridx=%d\n", rate, rn->fix_ridx);
ieee80211_free_node(ni);
}
#if 0
if ((ifp->if_flags & IFF_UP) &&
(ifp->if_drv_flags & IFF_DRV_RUNNING)){
run_init_locked(sc);
}
#endif
RUN_UNLOCK(sc);
return (0);
}
static int
run_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
const struct ieee80211_txparam *tp;
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct run_vap *rvp = RUN_VAP(vap);
enum ieee80211_state ostate;
uint32_t sta[3];
uint32_t tmp;
uint8_t ratectl;
uint8_t restart_ratectl = 0;
uint8_t bid = 1 << rvp->rvp_id;
ostate = vap->iv_state;
DPRINTF("%s -> %s\n",
ieee80211_state_name[ostate],
ieee80211_state_name[nstate]);
IEEE80211_UNLOCK(ic);
RUN_LOCK(sc);
ratectl = sc->ratectl_run; /* remember current state */
sc->ratectl_run = RUN_RATECTL_OFF;
usb_callout_stop(&sc->ratectl_ch);
if (ostate == IEEE80211_S_RUN) {
/* turn link LED off */
run_set_leds(sc, RT2860_LED_RADIO);
}
switch (nstate) {
case IEEE80211_S_INIT:
restart_ratectl = 1;
if (ostate != IEEE80211_S_RUN)
break;
ratectl &= ~bid;
sc->runbmap &= ~bid;
/* abort TSF synchronization if there is no vap running */
if (--sc->running == 0) {
run_read(sc, RT2860_BCN_TIME_CFG, &tmp);
run_write(sc, RT2860_BCN_TIME_CFG,
tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
RT2860_TBTT_TIMER_EN));
}
break;
case IEEE80211_S_RUN:
if (!(sc->runbmap & bid)) {
if(sc->running++)
restart_ratectl = 1;
sc->runbmap |= bid;
}
m_freem(rvp->beacon_mbuf);
rvp->beacon_mbuf = NULL;
switch (vap->iv_opmode) {
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
sc->ap_running |= bid;
ic->ic_opmode = vap->iv_opmode;
run_update_beacon_cb(vap);
break;
case IEEE80211_M_IBSS:
sc->adhoc_running |= bid;
if (!sc->ap_running)
ic->ic_opmode = vap->iv_opmode;
run_update_beacon_cb(vap);
break;
case IEEE80211_M_STA:
sc->sta_running |= bid;
if (!sc->ap_running && !sc->adhoc_running)
ic->ic_opmode = vap->iv_opmode;
/* read statistic counters (clear on read) */
run_read_region_1(sc, RT2860_TX_STA_CNT0,
(uint8_t *)sta, sizeof sta);
break;
default:
ic->ic_opmode = vap->iv_opmode;
break;
}
if (vap->iv_opmode != IEEE80211_M_MONITOR) {
struct ieee80211_node *ni;
if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) {
RUN_UNLOCK(sc);
IEEE80211_LOCK(ic);
return (-1);
}
run_updateslot(ic->ic_ifp);
run_enable_mrr(sc);
run_set_txpreamble(sc);
run_set_basicrates(sc);
ni = ieee80211_ref_node(vap->iv_bss);
IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid);
run_set_bssid(sc, ni->ni_bssid);
ieee80211_free_node(ni);
run_enable_tsf_sync(sc);
/* enable automatic rate adaptation */
tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)];
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
ratectl |= bid;
}
/* turn link LED on */
run_set_leds(sc, RT2860_LED_RADIO |
(IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ?
RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ));
break;
default:
DPRINTFN(6, "undefined case\n");
break;
}
/* restart amrr for running VAPs */
if ((sc->ratectl_run = ratectl) && restart_ratectl)
usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc);
RUN_UNLOCK(sc);
IEEE80211_LOCK(ic);
return(rvp->newstate(vap, nstate, arg));
}
/* ARGSUSED */
static void
run_wme_update_cb(void *arg)
{
struct ieee80211com *ic = arg;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211_wme_state *wmesp = &ic->ic_wme;
int aci, error = 0;
RUN_LOCK_ASSERT(sc, MA_OWNED);
/* update MAC TX configuration registers */
for (aci = 0; aci < WME_NUM_AC; aci++) {
error = run_write(sc, RT2860_EDCA_AC_CFG(aci),
wmesp->wme_params[aci].wmep_logcwmax << 16 |
wmesp->wme_params[aci].wmep_logcwmin << 12 |
wmesp->wme_params[aci].wmep_aifsn << 8 |
wmesp->wme_params[aci].wmep_txopLimit);
if (error) goto err;
}
/* update SCH/DMA registers too */
error = run_write(sc, RT2860_WMM_AIFSN_CFG,
wmesp->wme_params[WME_AC_VO].wmep_aifsn << 12 |
wmesp->wme_params[WME_AC_VI].wmep_aifsn << 8 |
wmesp->wme_params[WME_AC_BK].wmep_aifsn << 4 |
wmesp->wme_params[WME_AC_BE].wmep_aifsn);
if (error) goto err;
error = run_write(sc, RT2860_WMM_CWMIN_CFG,
wmesp->wme_params[WME_AC_VO].wmep_logcwmin << 12 |
wmesp->wme_params[WME_AC_VI].wmep_logcwmin << 8 |
wmesp->wme_params[WME_AC_BK].wmep_logcwmin << 4 |
wmesp->wme_params[WME_AC_BE].wmep_logcwmin);
if (error) goto err;
error = run_write(sc, RT2860_WMM_CWMAX_CFG,
wmesp->wme_params[WME_AC_VO].wmep_logcwmax << 12 |
wmesp->wme_params[WME_AC_VI].wmep_logcwmax << 8 |
wmesp->wme_params[WME_AC_BK].wmep_logcwmax << 4 |
wmesp->wme_params[WME_AC_BE].wmep_logcwmax);
if (error) goto err;
error = run_write(sc, RT2860_WMM_TXOP0_CFG,
wmesp->wme_params[WME_AC_BK].wmep_txopLimit << 16 |
wmesp->wme_params[WME_AC_BE].wmep_txopLimit);
if (error) goto err;
error = run_write(sc, RT2860_WMM_TXOP1_CFG,
wmesp->wme_params[WME_AC_VO].wmep_txopLimit << 16 |
wmesp->wme_params[WME_AC_VI].wmep_txopLimit);
err:
if (error)
DPRINTF("WME update failed\n");
return;
}
static int
run_wme_update(struct ieee80211com *ic)
{
struct run_softc *sc = ic->ic_ifp->if_softc;
/* sometime called wothout lock */
if (mtx_owned(&ic->ic_comlock.mtx)) {
uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_wme_update_cb;
sc->cmdq[i].arg0 = ic;
ieee80211_runtask(ic, &sc->cmdq_task);
return (0);
}
RUN_LOCK(sc);
run_wme_update_cb(ic);
RUN_UNLOCK(sc);
/* return whatever, upper layer desn't care anyway */
return (0);
}
static void
run_key_update_begin(struct ieee80211vap *vap)
{
/*
* To avoid out-of-order events, both run_key_set() and
* _delete() are deferred and handled by run_cmdq_cb().
* So, there is nothing we need to do here.
*/
}
static void
run_key_update_end(struct ieee80211vap *vap)
{
/* null */
}
static void
run_key_set_cb(void *arg)
{
struct run_cmdq *cmdq = arg;
struct ieee80211vap *vap = cmdq->arg1;
struct ieee80211_key *k = cmdq->k;
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211_node *ni;
uint32_t attr;
uint16_t base, associd;
uint8_t mode, wcid, iv[8];
RUN_LOCK_ASSERT(sc, MA_OWNED);
if (vap->iv_opmode == IEEE80211_M_HOSTAP)
ni = ieee80211_find_vap_node(&ic->ic_sta, vap, cmdq->mac);
else
ni = vap->iv_bss;
associd = (ni != NULL) ? ni->ni_associd : 0;
/* map net80211 cipher to RT2860 security mode */
switch (k->wk_cipher->ic_cipher) {
case IEEE80211_CIPHER_WEP:
if(k->wk_keylen < 8)
mode = RT2860_MODE_WEP40;
else
mode = RT2860_MODE_WEP104;
break;
case IEEE80211_CIPHER_TKIP:
mode = RT2860_MODE_TKIP;
break;
case IEEE80211_CIPHER_AES_CCM:
mode = RT2860_MODE_AES_CCMP;
break;
default:
DPRINTF("undefined case\n");
return;
}
DPRINTFN(1, "associd=%x, keyix=%d, mode=%x, type=%s, tx=%s, rx=%s\n",
associd, k->wk_keyix, mode,
(k->wk_flags & IEEE80211_KEY_GROUP) ? "group" : "pairwise",
(k->wk_flags & IEEE80211_KEY_XMIT) ? "on" : "off",
(k->wk_flags & IEEE80211_KEY_RECV) ? "on" : "off");
if (k->wk_flags & IEEE80211_KEY_GROUP) {
wcid = 0; /* NB: update WCID0 for group keys */
base = RT2860_SKEY(RUN_VAP(vap)->rvp_id, k->wk_keyix);
} else {
wcid = RUN_AID2WCID(associd);
base = RT2860_PKEY(wcid);
}
if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) {
if(run_write_region_1(sc, base, k->wk_key, 16))
return;
if(run_write_region_1(sc, base + 16, &k->wk_key[16], 8)) /* wk_txmic */
return;
if(run_write_region_1(sc, base + 24, &k->wk_key[24], 8)) /* wk_rxmic */
return;
} else {
/* roundup len to 16-bit: XXX fix write_region_1() instead */
if(run_write_region_1(sc, base, k->wk_key, (k->wk_keylen + 1) & ~1))
return;
}
if (!(k->wk_flags & IEEE80211_KEY_GROUP) ||
(k->wk_flags & (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV))) {
/* set initial packet number in IV+EIV */
if (k->wk_cipher == IEEE80211_CIPHER_WEP) {
memset(iv, 0, sizeof iv);
iv[3] = vap->iv_def_txkey << 6;
} else {
if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) {
iv[0] = k->wk_keytsc >> 8;
iv[1] = (iv[0] | 0x20) & 0x7f;
iv[2] = k->wk_keytsc;
} else /* CCMP */ {
iv[0] = k->wk_keytsc;
iv[1] = k->wk_keytsc >> 8;
iv[2] = 0;
}
iv[3] = k->wk_keyix << 6 | IEEE80211_WEP_EXTIV;
iv[4] = k->wk_keytsc >> 16;
iv[5] = k->wk_keytsc >> 24;
iv[6] = k->wk_keytsc >> 32;
iv[7] = k->wk_keytsc >> 40;
}
if (run_write_region_1(sc, RT2860_IVEIV(wcid), iv, 8))
return;
}
if (k->wk_flags & IEEE80211_KEY_GROUP) {
/* install group key */
if (run_read(sc, RT2860_SKEY_MODE_0_7, &attr))
return;
attr &= ~(0xf << (k->wk_keyix * 4));
attr |= mode << (k->wk_keyix * 4);
if (run_write(sc, RT2860_SKEY_MODE_0_7, attr))
return;
} else {
/* install pairwise key */
if (run_read(sc, RT2860_WCID_ATTR(wcid), &attr))
return;
attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN;
if (run_write(sc, RT2860_WCID_ATTR(wcid), attr))
return;
}
/* TODO create a pass-thru key entry? */
/* need wcid to delete the right key later */
k->wk_pad = wcid;
}
/*
* Don't have to be deferred, but in order to keep order of
* execution, i.e. with run_key_delete(), defer this and let
* run_cmdq_cb() maintain the order.
*
* return 0 on error
*/
static int
run_key_set(struct ieee80211vap *vap, struct ieee80211_key *k,
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
uint32_t i;
i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_key_set_cb;
sc->cmdq[i].arg0 = NULL;
sc->cmdq[i].arg1 = vap;
sc->cmdq[i].k = k;
IEEE80211_ADDR_COPY(sc->cmdq[i].mac, mac);
ieee80211_runtask(ic, &sc->cmdq_task);
/*
* To make sure key will be set when hostapd
* calls iv_key_set() before if_init().
*/
if (vap->iv_opmode == IEEE80211_M_HOSTAP) {
RUN_LOCK(sc);
sc->cmdq_key_set = RUN_CMDQ_GO;
RUN_UNLOCK(sc);
}
return (1);
}
/*
* If wlan is destroyed without being brought down i.e. without
* wlan down or wpa_cli terminate, this function is called after
* vap is gone. Don't refer it.
*/
static void
run_key_delete_cb(void *arg)
{
struct run_cmdq *cmdq = arg;
struct run_softc *sc = cmdq->arg1;
struct ieee80211_key *k = &cmdq->key;
uint32_t attr;
uint8_t wcid;
RUN_LOCK_ASSERT(sc, MA_OWNED);
if (k->wk_flags & IEEE80211_KEY_GROUP) {
/* remove group key */
DPRINTF("removing group key\n");
run_read(sc, RT2860_SKEY_MODE_0_7, &attr);
attr &= ~(0xf << (k->wk_keyix * 4));
run_write(sc, RT2860_SKEY_MODE_0_7, attr);
} else {
/* remove pairwise key */
DPRINTF("removing key for wcid %x\n", k->wk_pad);
/* matching wcid was written to wk_pad in run_key_set() */
wcid = k->wk_pad;
run_read(sc, RT2860_WCID_ATTR(wcid), &attr);
attr &= ~0xf;
run_write(sc, RT2860_WCID_ATTR(wcid), attr);
run_set_region_4(sc, RT2860_WCID_ENTRY(wcid), 0, 8);
}
k->wk_pad = 0;
}
/*
* return 0 on error
*/
static int
run_key_delete(struct ieee80211vap *vap, struct ieee80211_key *k)
{
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211_key *k0;
uint32_t i;
/*
* When called back, key might be gone. So, make a copy
* of some values need to delete keys before deferring.
* But, because of LOR with node lock, cannot use lock here.
* So, use atomic instead.
*/
i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_key_delete_cb;
sc->cmdq[i].arg0 = NULL;
sc->cmdq[i].arg1 = sc;
k0 = &sc->cmdq[i].key;
k0->wk_flags = k->wk_flags;
k0->wk_keyix = k->wk_keyix;
/* matching wcid was written to wk_pad in run_key_set() */
k0->wk_pad = k->wk_pad;
ieee80211_runtask(ic, &sc->cmdq_task);
return (1); /* return fake success */
}
static void
run_ratectl_to(void *arg)
{
struct run_softc *sc = arg;
/* do it in a process context, so it can go sleep */
ieee80211_runtask(sc->sc_ifp->if_l2com, &sc->ratectl_task);
/* next timeout will be rescheduled in the callback task */
}
/* ARGSUSED */
static void
run_ratectl_cb(void *arg, int pending)
{
struct run_softc *sc = arg;
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
if (vap == NULL)
return;
if (sc->rvp_cnt <= 1 && vap->iv_opmode == IEEE80211_M_STA)
run_iter_func(sc, vap->iv_bss);
else {
/*
* run_reset_livelock() doesn't do anything with AMRR,
* but Ralink wants us to call it every 1 sec. So, we
* piggyback here rather than creating another callout.
* Livelock may occur only in HOSTAP or IBSS mode
* (when h/w is sending beacons).
*/
RUN_LOCK(sc);
run_reset_livelock(sc);
/* just in case, there are some stats to drain */
run_drain_fifo(sc);
RUN_UNLOCK(sc);
ieee80211_iterate_nodes(&ic->ic_sta, run_iter_func, sc);
}
if(sc->ratectl_run != RUN_RATECTL_OFF)
usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc);
}
static void
run_drain_fifo(void *arg)
{
struct run_softc *sc = arg;
struct ifnet *ifp = sc->sc_ifp;
uint32_t stat;
uint16_t (*wstat)[3];
uint8_t wcid, mcs, pid;
int8_t retry;
RUN_LOCK_ASSERT(sc, MA_OWNED);
for (;;) {
/* drain Tx status FIFO (maxsize = 16) */
run_read(sc, RT2860_TX_STAT_FIFO, &stat);
DPRINTFN(4, "tx stat 0x%08x\n", stat);
if (!(stat & RT2860_TXQ_VLD))
break;
wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff;
/* if no ACK was requested, no feedback is available */
if (!(stat & RT2860_TXQ_ACKREQ) || wcid > RT2870_WCID_MAX ||
wcid == 0)
continue;
/*
* Even though each stat is Tx-complete-status like format,
* the device can poll stats. Because there is no guarantee
* that the referring node is still around when read the stats.
* So that, if we use ieee80211_ratectl_tx_update(), we will
* have hard time not to refer already freed node.
*
* To eliminate such page faults, we poll stats in softc.
* Then, update the rates later with ieee80211_ratectl_tx_update().
*/
wstat = &(sc->wcid_stats[wcid]);
(*wstat)[RUN_TXCNT]++;
if (stat & RT2860_TXQ_OK)
(*wstat)[RUN_SUCCESS]++;
else
ifp->if_oerrors++;
/*
* Check if there were retries, ie if the Tx success rate is
* different from the requested rate. Note that it works only
* because we do not allow rate fallback from OFDM to CCK.
*/
mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f;
pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf;
if ((retry = pid -1 - mcs) > 0) {
(*wstat)[RUN_TXCNT] += retry;
(*wstat)[RUN_RETRY] += retry;
}
}
DPRINTFN(3, "count=%d\n", sc->fifo_cnt);
sc->fifo_cnt = 0;
}
static void
run_iter_func(void *arg, struct ieee80211_node *ni)
{
struct run_softc *sc = arg;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = ic->ic_ifp;
struct run_node *rn = (void *)ni;
union run_stats sta[2];
uint16_t (*wstat)[3];
int txcnt, success, retrycnt, error;
RUN_LOCK(sc);
if (sc->rvp_cnt <= 1 && (vap->iv_opmode == IEEE80211_M_IBSS ||
vap->iv_opmode == IEEE80211_M_STA)) {
/* read statistic counters (clear on read) and update AMRR state */
error = run_read_region_1(sc, RT2860_TX_STA_CNT0, (uint8_t *)sta,
sizeof sta);
if (error != 0)
goto fail;
/* count failed TX as errors */
ifp->if_oerrors += le16toh(sta[0].error.fail);
retrycnt = le16toh(sta[1].tx.retry);
success = le16toh(sta[1].tx.success);
txcnt = retrycnt + success + le16toh(sta[0].error.fail);
DPRINTFN(3, "retrycnt=%d success=%d failcnt=%d\n",
retrycnt, success, le16toh(sta[0].error.fail));
} else {
wstat = &(sc->wcid_stats[RUN_AID2WCID(ni->ni_associd)]);
if (wstat == &(sc->wcid_stats[0]) ||
wstat > &(sc->wcid_stats[RT2870_WCID_MAX]))
goto fail;
txcnt = (*wstat)[RUN_TXCNT];
success = (*wstat)[RUN_SUCCESS];
retrycnt = (*wstat)[RUN_RETRY];
DPRINTFN(3, "retrycnt=%d txcnt=%d success=%d\n",
retrycnt, txcnt, success);
memset(wstat, 0, sizeof(*wstat));
}
ieee80211_ratectl_tx_update(vap, ni, &txcnt, &success, &retrycnt);
rn->amrr_ridx = ieee80211_ratectl_rate(ni, NULL, 0);
fail:
RUN_UNLOCK(sc);
DPRINTFN(3, "ridx=%d\n", rn->amrr_ridx);
}
static void
run_newassoc_cb(void *arg)
{
struct run_cmdq *cmdq = arg;
struct ieee80211_node *ni = cmdq->arg1;
struct run_softc *sc = ni->ni_vap->iv_ic->ic_ifp->if_softc;
uint8_t wcid = cmdq->wcid;
RUN_LOCK_ASSERT(sc, MA_OWNED);
run_write_region_1(sc, RT2860_WCID_ENTRY(wcid),
ni->ni_macaddr, IEEE80211_ADDR_LEN);
memset(&(sc->wcid_stats[wcid]), 0, sizeof(sc->wcid_stats[wcid]));
}
static void
run_newassoc(struct ieee80211_node *ni, int isnew)
{
struct run_node *rn = (void *)ni;
struct ieee80211_rateset *rs = &ni->ni_rates;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
uint8_t rate;
uint8_t ridx;
uint8_t wcid = RUN_AID2WCID(ni->ni_associd);
int i, j;
if (wcid > RT2870_WCID_MAX) {
device_printf(sc->sc_dev, "wcid=%d out of range\n", wcid);
return;
}
/* only interested in true associations */
if (isnew && ni->ni_associd != 0) {
/*
* This function could is called though timeout function.
* Need to defer.
*/
uint32_t cnt = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", cnt);
sc->cmdq[cnt].func = run_newassoc_cb;
sc->cmdq[cnt].arg0 = NULL;
sc->cmdq[cnt].arg1 = ni;
sc->cmdq[cnt].wcid = wcid;
ieee80211_runtask(ic, &sc->cmdq_task);
}
DPRINTF("new assoc isnew=%d associd=%x addr=%s\n",
isnew, ni->ni_associd, ether_sprintf(ni->ni_macaddr));
for (i = 0; i < rs->rs_nrates; i++) {
rate = rs->rs_rates[i] & IEEE80211_RATE_VAL;
/* convert 802.11 rate to hardware rate index */
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
rn->ridx[i] = ridx;
/* determine rate of control response frames */
for (j = i; j >= 0; j--) {
if ((rs->rs_rates[j] & IEEE80211_RATE_BASIC) &&
rt2860_rates[rn->ridx[i]].phy ==
rt2860_rates[rn->ridx[j]].phy)
break;
}
if (j >= 0) {
rn->ctl_ridx[i] = rn->ridx[j];
} else {
/* no basic rate found, use mandatory one */
rn->ctl_ridx[i] = rt2860_rates[ridx].ctl_ridx;
}
DPRINTF("rate=0x%02x ridx=%d ctl_ridx=%d\n",
rs->rs_rates[i], rn->ridx[i], rn->ctl_ridx[i]);
}
rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate;
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
rn->mgt_ridx = ridx;
DPRINTF("rate=%d, mgmt_ridx=%d\n", rate, rn->mgt_ridx);
usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc);
}
/*
* Return the Rx chain with the highest RSSI for a given frame.
*/
static __inline uint8_t
run_maxrssi_chain(struct run_softc *sc, const struct rt2860_rxwi *rxwi)
{
uint8_t rxchain = 0;
if (sc->nrxchains > 1) {
if (rxwi->rssi[1] > rxwi->rssi[rxchain])
rxchain = 1;
if (sc->nrxchains > 2)
if (rxwi->rssi[2] > rxwi->rssi[rxchain])
rxchain = 2;
}
return (rxchain);
}
static void
run_rx_frame(struct run_softc *sc, struct mbuf *m, uint32_t dmalen)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct ieee80211_frame *wh;
struct ieee80211_node *ni;
struct rt2870_rxd *rxd;
struct rt2860_rxwi *rxwi;
uint32_t flags;
uint16_t len, phy;
uint8_t ant, rssi;
int8_t nf;
rxwi = mtod(m, struct rt2860_rxwi *);
len = le16toh(rxwi->len) & 0xfff;
if (__predict_false(len > dmalen)) {
m_freem(m);
ifp->if_ierrors++;
DPRINTF("bad RXWI length %u > %u\n", len, dmalen);
return;
}
/* Rx descriptor is located at the end */
rxd = (struct rt2870_rxd *)(mtod(m, caddr_t) + dmalen);
flags = le32toh(rxd->flags);
if (__predict_false(flags & (RT2860_RX_CRCERR | RT2860_RX_ICVERR))) {
m_freem(m);
ifp->if_ierrors++;
DPRINTF("%s error.\n", (flags & RT2860_RX_CRCERR)?"CRC":"ICV");
return;
}
m->m_data += sizeof(struct rt2860_rxwi);
m->m_pkthdr.len = m->m_len -= sizeof(struct rt2860_rxwi);
wh = mtod(m, struct ieee80211_frame *);
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
wh->i_fc[1] &= ~IEEE80211_FC1_WEP;
m->m_flags |= M_WEP;
}
if (flags & RT2860_RX_L2PAD) {
DPRINTFN(8, "received RT2860_RX_L2PAD frame\n");
len += 2;
}
ni = ieee80211_find_rxnode(ic,
mtod(m, struct ieee80211_frame_min *));
if (__predict_false(flags & RT2860_RX_MICERR)) {
/* report MIC failures to net80211 for TKIP */
if (ni != NULL)
ieee80211_notify_michael_failure(ni->ni_vap, wh, rxwi->keyidx);
m_freem(m);
ifp->if_ierrors++;
DPRINTF("MIC error. Someone is lying.\n");
return;
}
ant = run_maxrssi_chain(sc, rxwi);
rssi = rxwi->rssi[ant];
nf = run_rssi2dbm(sc, rssi, ant);
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len = len;
if (ni != NULL) {
(void)ieee80211_input(ni, m, rssi, nf);
ieee80211_free_node(ni);
} else {
(void)ieee80211_input_all(ic, m, rssi, nf);
}
if (__predict_false(ieee80211_radiotap_active(ic))) {
struct run_rx_radiotap_header *tap = &sc->sc_rxtap;
tap->wr_flags = 0;
tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
tap->wr_antsignal = rssi;
tap->wr_antenna = ant;
tap->wr_dbm_antsignal = run_rssi2dbm(sc, rssi, ant);
tap->wr_rate = 2; /* in case it can't be found below */
phy = le16toh(rxwi->phy);
switch (phy & RT2860_PHY_MODE) {
case RT2860_PHY_CCK:
switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) {
case 0: tap->wr_rate = 2; break;
case 1: tap->wr_rate = 4; break;
case 2: tap->wr_rate = 11; break;
case 3: tap->wr_rate = 22; break;
}
if (phy & RT2860_PHY_SHPRE)
tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
break;
case RT2860_PHY_OFDM:
switch (phy & RT2860_PHY_MCS) {
case 0: tap->wr_rate = 12; break;
case 1: tap->wr_rate = 18; break;
case 2: tap->wr_rate = 24; break;
case 3: tap->wr_rate = 36; break;
case 4: tap->wr_rate = 48; break;
case 5: tap->wr_rate = 72; break;
case 6: tap->wr_rate = 96; break;
case 7: tap->wr_rate = 108; break;
}
break;
}
}
}
static void
run_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error)
{
struct run_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = sc->sc_ifp;
struct mbuf *m = NULL;
struct mbuf *m0;
uint32_t dmalen;
int xferlen;
usbd_xfer_status(xfer, &xferlen, NULL, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(15, "rx done, actlen=%d\n", xferlen);
if (xferlen < (int)(sizeof(uint32_t) +
sizeof(struct rt2860_rxwi) + sizeof(struct rt2870_rxd))) {
DPRINTF("xfer too short %d\n", xferlen);
goto tr_setup;
}
m = sc->rx_m;
sc->rx_m = NULL;
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
if (sc->rx_m == NULL) {
sc->rx_m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR,
MJUMPAGESIZE /* xfer can be bigger than MCLBYTES */);
}
if (sc->rx_m == NULL) {
DPRINTF("could not allocate mbuf - idle with stall\n");
ifp->if_ierrors++;
usbd_xfer_set_stall(xfer);
usbd_xfer_set_frames(xfer, 0);
} else {
/*
* Directly loading a mbuf cluster into DMA to
* save some data copying. This works because
* there is only one cluster.
*/
usbd_xfer_set_frame_data(xfer, 0,
mtod(sc->rx_m, caddr_t), RUN_MAX_RXSZ);
usbd_xfer_set_frames(xfer, 1);
}
usbd_transfer_submit(xfer);
break;
default: /* Error */
if (error != USB_ERR_CANCELLED) {
/* try to clear stall first */
usbd_xfer_set_stall(xfer);
if (error == USB_ERR_TIMEOUT)
device_printf(sc->sc_dev, "device timeout\n");
ifp->if_ierrors++;
goto tr_setup;
}
if (sc->rx_m != NULL) {
m_freem(sc->rx_m);
sc->rx_m = NULL;
}
break;
}
if (m == NULL)
return;
/* inputting all the frames must be last */
RUN_UNLOCK(sc);
m->m_pkthdr.len = m->m_len = xferlen;
/* HW can aggregate multiple 802.11 frames in a single USB xfer */
for(;;) {
dmalen = le32toh(*mtod(m, uint32_t *)) & 0xffff;
if ((dmalen >= (uint32_t)-8) || (dmalen == 0) ||
((dmalen & 3) != 0)) {
DPRINTF("bad DMA length %u\n", dmalen);
break;
}
if ((dmalen + 8) > (uint32_t)xferlen) {
DPRINTF("bad DMA length %u > %d\n",
dmalen + 8, xferlen);
break;
}
/* If it is the last one or a single frame, we won't copy. */
if ((xferlen -= dmalen + 8) <= 8) {
/* trim 32-bit DMA-len header */
m->m_data += 4;
m->m_pkthdr.len = m->m_len -= 4;
run_rx_frame(sc, m, dmalen);
break;
}
/* copy aggregated frames to another mbuf */
m0 = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (__predict_false(m0 == NULL)) {
DPRINTF("could not allocate mbuf\n");
ifp->if_ierrors++;
break;
}
m_copydata(m, 4 /* skip 32-bit DMA-len header */,
dmalen + sizeof(struct rt2870_rxd), mtod(m0, caddr_t));
m0->m_pkthdr.len = m0->m_len =
dmalen + sizeof(struct rt2870_rxd);
run_rx_frame(sc, m0, dmalen);
/* update data ptr */
m->m_data += dmalen + 8;
m->m_pkthdr.len = m->m_len -= dmalen + 8;
}
RUN_LOCK(sc);
}
static void
run_tx_free(struct run_endpoint_queue *pq,
struct run_tx_data *data, int txerr)
{
if (data->m != NULL) {
if (data->m->m_flags & M_TXCB)
ieee80211_process_callback(data->ni, data->m,
txerr ? ETIMEDOUT : 0);
m_freem(data->m);
data->m = NULL;
if (data->ni == NULL) {
DPRINTF("no node\n");
} else {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
}
STAILQ_INSERT_TAIL(&pq->tx_fh, data, next);
pq->tx_nfree++;
}
static void
run_bulk_tx_callbackN(struct usb_xfer *xfer, usb_error_t error, unsigned int index)
{
struct run_softc *sc = usbd_xfer_softc(xfer);
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct run_tx_data *data;
struct ieee80211vap *vap = NULL;
struct usb_page_cache *pc;
struct run_endpoint_queue *pq = &sc->sc_epq[index];
struct mbuf *m;
usb_frlength_t size;
int actlen;
int sumlen;
usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
switch (USB_GET_STATE(xfer)) {
case USB_ST_TRANSFERRED:
DPRINTFN(11, "transfer complete: %d "
"bytes @ index %d\n", actlen, index);
data = usbd_xfer_get_priv(xfer);
run_tx_free(pq, data, 0);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
usbd_xfer_set_priv(xfer, NULL);
ifp->if_opackets++;
/* FALLTHROUGH */
case USB_ST_SETUP:
tr_setup:
data = STAILQ_FIRST(&pq->tx_qh);
if (data == NULL)
break;
STAILQ_REMOVE_HEAD(&pq->tx_qh, next);
m = data->m;
if ((m->m_pkthdr.len +
sizeof(data->desc) + 3 + 8) > RUN_MAX_TXSZ) {
DPRINTF("data overflow, %u bytes\n",
m->m_pkthdr.len);
ifp->if_oerrors++;
run_tx_free(pq, data, 1);
goto tr_setup;
}
pc = usbd_xfer_get_frame(xfer, 0);
size = sizeof(data->desc);
usbd_copy_in(pc, 0, &data->desc, size);
usbd_m_copy_in(pc, size, m, 0, m->m_pkthdr.len);
size += m->m_pkthdr.len;
/*
* Align end on a 4-byte boundary, pad 8 bytes (CRC +
* 4-byte padding), and be sure to zero those trailing
* bytes:
*/
usbd_frame_zero(pc, size, ((-size) & 3) + 8);
size += ((-size) & 3) + 8;
vap = data->ni->ni_vap;
if (ieee80211_radiotap_active_vap(vap)) {
struct run_tx_radiotap_header *tap = &sc->sc_txtap;
struct rt2860_txwi *txwi =
(struct rt2860_txwi *)(&data->desc + sizeof(struct rt2870_txd));
tap->wt_flags = 0;
tap->wt_rate = rt2860_rates[data->ridx].rate;
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
tap->wt_hwqueue = index;
if (le16toh(txwi->phy) & RT2860_PHY_SHPRE)
tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
ieee80211_radiotap_tx(vap, m);
}
DPRINTFN(11, "sending frame len=%u/%u @ index %d\n",
m->m_pkthdr.len, size, index);
usbd_xfer_set_frame_len(xfer, 0, size);
usbd_xfer_set_priv(xfer, data);
usbd_transfer_submit(xfer);
RUN_UNLOCK(sc);
run_start(ifp);
RUN_LOCK(sc);
break;
default:
DPRINTF("USB transfer error, %s\n",
usbd_errstr(error));
data = usbd_xfer_get_priv(xfer);
ifp->if_oerrors++;
if (data != NULL) {
if(data->ni != NULL)
vap = data->ni->ni_vap;
run_tx_free(pq, data, error);
usbd_xfer_set_priv(xfer, NULL);
}
if (vap == NULL)
vap = TAILQ_FIRST(&ic->ic_vaps);
if (error != USB_ERR_CANCELLED) {
if (error == USB_ERR_TIMEOUT) {
device_printf(sc->sc_dev, "device timeout\n");
uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_usb_timeout_cb;
sc->cmdq[i].arg0 = vap;
ieee80211_runtask(ic, &sc->cmdq_task);
}
/*
* Try to clear stall first, also if other
* errors occur, hence clearing stall
* introduces a 50 ms delay:
*/
usbd_xfer_set_stall(xfer);
goto tr_setup;
}
break;
}
}
static void
run_bulk_tx_callback0(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 0);
}
static void
run_bulk_tx_callback1(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 1);
}
static void
run_bulk_tx_callback2(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 2);
}
static void
run_bulk_tx_callback3(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 3);
}
static void
run_bulk_tx_callback4(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 4);
}
static void
run_bulk_tx_callback5(struct usb_xfer *xfer, usb_error_t error)
{
run_bulk_tx_callbackN(xfer, error, 5);
}
static void
run_set_tx_desc(struct run_softc *sc, struct run_tx_data *data)
{
struct mbuf *m = data->m;
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211vap *vap = data->ni->ni_vap;
struct ieee80211_frame *wh;
struct rt2870_txd *txd;
struct rt2860_txwi *txwi;
uint16_t xferlen;
uint16_t mcs;
uint8_t ridx = data->ridx;
uint8_t pad;
/* get MCS code from rate index */
mcs = rt2860_rates[ridx].mcs;
xferlen = sizeof(*txwi) + m->m_pkthdr.len;
/* roundup to 32-bit alignment */
xferlen = (xferlen + 3) & ~3;
txd = (struct rt2870_txd *)&data->desc;
txd->len = htole16(xferlen);
wh = mtod(m, struct ieee80211_frame *);
/*
* Ether both are true or both are false, the header
* are nicely aligned to 32-bit. So, no L2 padding.
*/
if(IEEE80211_HAS_ADDR4(wh) == IEEE80211_QOS_HAS_SEQ(wh))
pad = 0;
else
pad = 2;
/* setup TX Wireless Information */
txwi = (struct rt2860_txwi *)(txd + 1);
txwi->len = htole16(m->m_pkthdr.len - pad);
if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
txwi->phy = htole16(RT2860_PHY_CCK);
if (ridx != RT2860_RIDX_CCK1 &&
(ic->ic_flags & IEEE80211_F_SHPREAMBLE))
mcs |= RT2860_PHY_SHPRE;
} else
txwi->phy = htole16(RT2860_PHY_OFDM);
txwi->phy |= htole16(mcs);
/* check if RTS/CTS or CTS-to-self protection is required */
if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
(m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold ||
((ic->ic_flags & IEEE80211_F_USEPROT) &&
rt2860_rates[ridx].phy == IEEE80211_T_OFDM)))
txwi->txop |= RT2860_TX_TXOP_HT;
else
txwi->txop |= RT2860_TX_TXOP_BACKOFF;
if (vap->iv_opmode != IEEE80211_M_STA && !IEEE80211_QOS_HAS_SEQ(wh))
txwi->xflags |= RT2860_TX_NSEQ;
}
/* This function must be called locked */
static int
run_tx(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211_frame *wh;
struct ieee80211_channel *chan;
const struct ieee80211_txparam *tp;
struct run_node *rn = (void *)ni;
struct run_tx_data *data;
struct rt2870_txd *txd;
struct rt2860_txwi *txwi;
uint16_t qos;
uint16_t dur;
uint16_t qid;
uint8_t type;
uint8_t tid;
uint8_t ridx;
uint8_t ctl_ridx;
uint8_t qflags;
uint8_t xflags = 0;
int hasqos;
RUN_LOCK_ASSERT(sc, MA_OWNED);
wh = mtod(m, struct ieee80211_frame *);
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
/*
* There are 7 bulk endpoints: 1 for RX
* and 6 for TX (4 EDCAs + HCCA + Prio).
* Update 03-14-2009: some devices like the Planex GW-US300MiniS
* seem to have only 4 TX bulk endpoints (Fukaumi Naoki).
*/
if ((hasqos = IEEE80211_QOS_HAS_SEQ(wh))) {
uint8_t *frm;
if(IEEE80211_HAS_ADDR4(wh))
frm = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos;
else
frm =((struct ieee80211_qosframe *)wh)->i_qos;
qos = le16toh(*(const uint16_t *)frm);
tid = qos & IEEE80211_QOS_TID;
qid = TID_TO_WME_AC(tid);
} else {
qos = 0;
tid = 0;
qid = WME_AC_BE;
}
qflags = (qid < 4) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_HCCA;
DPRINTFN(8, "qos %d\tqid %d\ttid %d\tqflags %x\n",
qos, qid, tid, qflags);
chan = (ni->ni_chan != IEEE80211_CHAN_ANYC)?ni->ni_chan:ic->ic_curchan;
tp = &vap->iv_txparms[ieee80211_chan2mode(chan)];
/* pickup a rate index */
if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
type != IEEE80211_FC0_TYPE_DATA) {
ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
ctl_ridx = rt2860_rates[ridx].ctl_ridx;
} else {
if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE)
ridx = rn->fix_ridx;
else
ridx = rn->amrr_ridx;
ctl_ridx = rt2860_rates[ridx].ctl_ridx;
}
if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
(!hasqos || (qos & IEEE80211_QOS_ACKPOLICY) !=
IEEE80211_QOS_ACKPOLICY_NOACK)) {
xflags |= RT2860_TX_ACK;
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
dur = rt2860_rates[ctl_ridx].sp_ack_dur;
else
dur = rt2860_rates[ctl_ridx].lp_ack_dur;
*(uint16_t *)wh->i_dur = htole16(dur);
}
/* reserve slots for mgmt packets, just in case */
if (sc->sc_epq[qid].tx_nfree < 3) {
DPRINTFN(10, "tx ring %d is full\n", qid);
return (-1);
}
data = STAILQ_FIRST(&sc->sc_epq[qid].tx_fh);
STAILQ_REMOVE_HEAD(&sc->sc_epq[qid].tx_fh, next);
sc->sc_epq[qid].tx_nfree--;
txd = (struct rt2870_txd *)&data->desc;
txd->flags = qflags;
txwi = (struct rt2860_txwi *)(txd + 1);
txwi->xflags = xflags;
txwi->wcid = IEEE80211_IS_MULTICAST(wh->i_addr1) ?
0 : RUN_AID2WCID(ni->ni_associd);
/* clear leftover garbage bits */
txwi->flags = 0;
txwi->txop = 0;
data->m = m;
data->ni = ni;
data->ridx = ridx;
run_set_tx_desc(sc, data);
/*
* The chip keeps track of 2 kind of Tx stats,
* * TX_STAT_FIFO, for per WCID stats, and
* * TX_STA_CNT0 for all-TX-in-one stats.
*
* To use FIFO stats, we need to store MCS into the driver-private
* PacketID field. So that, we can tell whose stats when we read them.
* We add 1 to the MCS because setting the PacketID field to 0 means
* that we don't want feedback in TX_STAT_FIFO.
* And, that's what we want for STA mode, since TX_STA_CNT0 does the job.
*
* FIFO stats doesn't count Tx with WCID 0xff, so we do this in run_tx().
*/
if (sc->rvp_cnt > 1 || vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_MBSS) {
uint16_t pid = (rt2860_rates[ridx].mcs + 1) & 0xf;
txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT);
/*
* Unlike PCI based devices, we don't get any interrupt from
* USB devices, so we simulate FIFO-is-full interrupt here.
* Ralink recomends to drain FIFO stats every 100 ms, but 16 slots
* quickly get fulled. To prevent overflow, increment a counter on
* every FIFO stat request, so we know how many slots are left.
* We do this only in HOSTAP or multiple vap mode since FIFO stats
* are used only in those modes.
* We just drain stats. AMRR gets updated every 1 sec by
* run_ratectl_cb() via callout.
* Call it early. Otherwise overflow.
*/
if (sc->fifo_cnt++ == 10) {
/*
* With multiple vaps or if_bridge, if_start() is called
* with a non-sleepable lock, tcpinp. So, need to defer.
*/
uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTFN(6, "cmdq_store=%d\n", i);
sc->cmdq[i].func = run_drain_fifo;
sc->cmdq[i].arg0 = sc;
ieee80211_runtask(ic, &sc->cmdq_task);
}
}
STAILQ_INSERT_TAIL(&sc->sc_epq[qid].tx_qh, data, next);
usbd_transfer_start(sc->sc_xfer[qid]);
DPRINTFN(8, "sending data frame len=%d rate=%d qid=%d\n", m->m_pkthdr.len +
(int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)),
rt2860_rates[ridx].rate, qid);
return (0);
}
static int
run_tx_mgt(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct run_node *rn = (void *)ni;
struct run_tx_data *data;
struct ieee80211_frame *wh;
struct rt2870_txd *txd;
struct rt2860_txwi *txwi;
uint16_t dur;
uint8_t ridx = rn->mgt_ridx;
uint8_t type;
uint8_t xflags = 0;
uint8_t wflags = 0;
RUN_LOCK_ASSERT(sc, MA_OWNED);
wh = mtod(m, struct ieee80211_frame *);
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
/* tell hardware to add timestamp for probe responses */
if ((wh->i_fc[0] &
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
wflags |= RT2860_TX_TS;
else if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
xflags |= RT2860_TX_ACK;
dur = ieee80211_ack_duration(ic->ic_rt, rt2860_rates[ridx].rate,
ic->ic_flags & IEEE80211_F_SHPREAMBLE);
*(uint16_t *)wh->i_dur = htole16(dur);
}
if (sc->sc_epq[0].tx_nfree == 0) {
/* let caller free mbuf */
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
return (EIO);
}
data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh);
STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next);
sc->sc_epq[0].tx_nfree--;
txd = (struct rt2870_txd *)&data->desc;
txd->flags = RT2860_TX_QSEL_EDCA;
txwi = (struct rt2860_txwi *)(txd + 1);
txwi->wcid = 0xff;
txwi->flags = wflags;
txwi->xflags = xflags;
txwi->txop = 0; /* clear leftover garbage bits */
data->m = m;
data->ni = ni;
data->ridx = ridx;
run_set_tx_desc(sc, data);
DPRINTFN(10, "sending mgt frame len=%d rate=%d\n", m->m_pkthdr.len +
(int)(sizeof (struct rt2870_txd) + sizeof (struct rt2860_rxwi)),
rt2860_rates[ridx].rate);
STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next);
usbd_transfer_start(sc->sc_xfer[0]);
return (0);
}
static int
run_sendprot(struct run_softc *sc,
const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
struct run_tx_data *data;
struct rt2870_txd *txd;
struct rt2860_txwi *txwi;
struct mbuf *mprot;
int ridx;
int protrate;
int ackrate;
int pktlen;
int isshort;
uint16_t dur;
uint8_t type;
uint8_t wflags = 0;
uint8_t xflags = 0;
RUN_LOCK_ASSERT(sc, MA_OWNED);
KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY,
("protection %d", prot));
wh = mtod(m, struct ieee80211_frame *);
pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN;
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
protrate = ieee80211_ctl_rate(ic->ic_rt, rate);
ackrate = ieee80211_ack_rate(ic->ic_rt, rate);
isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0;
dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort)
+ ieee80211_ack_duration(ic->ic_rt, rate, isshort);
wflags = RT2860_TX_FRAG;
/* check that there are free slots before allocating the mbuf */
if (sc->sc_epq[0].tx_nfree == 0) {
/* let caller free mbuf */
sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
return (ENOBUFS);
}
if (prot == IEEE80211_PROT_RTSCTS) {
/* NB: CTS is the same size as an ACK */
dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort);
xflags |= RT2860_TX_ACK;
mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur);
} else {
mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur);
}
if (mprot == NULL) {
sc->sc_ifp->if_oerrors++;
DPRINTF("could not allocate mbuf\n");
return (ENOBUFS);
}
data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh);
STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next);
sc->sc_epq[0].tx_nfree--;
txd = (struct rt2870_txd *)&data->desc;
txd->flags = RT2860_TX_QSEL_EDCA;
txwi = (struct rt2860_txwi *)(txd + 1);
txwi->wcid = 0xff;
txwi->flags = wflags;
txwi->xflags = xflags;
txwi->txop = 0; /* clear leftover garbage bits */
data->m = mprot;
data->ni = ieee80211_ref_node(ni);
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == protrate)
break;
data->ridx = ridx;
run_set_tx_desc(sc, data);
DPRINTFN(1, "sending prot len=%u rate=%u\n",
m->m_pkthdr.len, rate);
STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next);
usbd_transfer_start(sc->sc_xfer[0]);
return (0);
}
static int
run_tx_param(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni,
const struct ieee80211_bpf_params *params)
{
struct ieee80211com *ic = ni->ni_ic;
struct ieee80211_frame *wh;
struct run_tx_data *data;
struct rt2870_txd *txd;
struct rt2860_txwi *txwi;
uint8_t type;
uint8_t ridx;
uint8_t rate;
uint8_t opflags = 0;
uint8_t xflags = 0;
int error;
RUN_LOCK_ASSERT(sc, MA_OWNED);
KASSERT(params != NULL, ("no raw xmit params"));
wh = mtod(m, struct ieee80211_frame *);
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
rate = params->ibp_rate0;
if (!ieee80211_isratevalid(ic->ic_rt, rate)) {
/* let caller free mbuf */
return (EINVAL);
}
if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0)
xflags |= RT2860_TX_ACK;
if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) {
error = run_sendprot(sc, m, ni,
params->ibp_flags & IEEE80211_BPF_RTS ?
IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY,
rate);
if (error) {
/* let caller free mbuf */
return error;
}
opflags |= /*XXX RT2573_TX_LONG_RETRY |*/ RT2860_TX_TXOP_SIFS;
}
if (sc->sc_epq[0].tx_nfree == 0) {
/* let caller free mbuf */
sc->sc_ifp->if_drv_flags |= IFF_DRV_OACTIVE;
DPRINTF("sending raw frame, but tx ring is full\n");
return (EIO);
}
data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh);
STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next);
sc->sc_epq[0].tx_nfree--;
txd = (struct rt2870_txd *)&data->desc;
txd->flags = RT2860_TX_QSEL_EDCA;
txwi = (struct rt2860_txwi *)(txd + 1);
txwi->wcid = 0xff;
txwi->xflags = xflags;
txwi->txop = opflags;
txwi->flags = 0; /* clear leftover garbage bits */
data->m = m;
data->ni = ni;
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
data->ridx = ridx;
run_set_tx_desc(sc, data);
DPRINTFN(10, "sending raw frame len=%u rate=%u\n",
m->m_pkthdr.len, rate);
STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next);
usbd_transfer_start(sc->sc_xfer[0]);
return (0);
}
static int
run_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params)
{
struct ifnet *ifp = ni->ni_ic->ic_ifp;
struct run_softc *sc = ifp->if_softc;
int error = 0;
RUN_LOCK(sc);
/* prevent management frames from being sent if we're not ready */
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
error = ENETDOWN;
goto done;
}
if (params == NULL) {
/* tx mgt packet */
if ((error = run_tx_mgt(sc, m, ni)) != 0) {
ifp->if_oerrors++;
DPRINTF("mgt tx failed\n");
goto done;
}
} else {
/* tx raw packet with param */
if ((error = run_tx_param(sc, m, ni, params)) != 0) {
ifp->if_oerrors++;
DPRINTF("tx with param failed\n");
goto done;
}
}
ifp->if_opackets++;
done:
RUN_UNLOCK(sc);
if (error != 0) {
if(m != NULL)
m_freem(m);
ieee80211_free_node(ni);
}
return (error);
}
static void
run_start(struct ifnet *ifp)
{
struct run_softc *sc = ifp->if_softc;
struct ieee80211_node *ni;
struct mbuf *m;
RUN_LOCK(sc);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
RUN_UNLOCK(sc);
return;
}
for (;;) {
/* send data frames */
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
ni = (struct ieee80211_node *)m->m_pkthdr.rcvif;
if (run_tx(sc, m, ni) != 0) {
IFQ_DRV_PREPEND(&ifp->if_snd, m);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
}
RUN_UNLOCK(sc);
}
static int
run_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct run_softc *sc = ifp->if_softc;
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ifreq *ifr = (struct ifreq *) data;
int startall = 0;
int error = 0;
switch (cmd) {
case SIOCSIFFLAGS:
RUN_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)){
startall = 1;
run_init_locked(sc);
} else
run_update_promisc_locked(ifp);
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
(ic->ic_nrunning == 0 || sc->rvp_cnt <= 1)) {
run_stop(sc);
}
}
RUN_UNLOCK(sc);
if (startall)
ieee80211_start_all(ic);
break;
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
break;
case SIOCGIFADDR:
error = ether_ioctl(ifp, cmd, data);
break;
default:
error = EINVAL;
break;
}
return (error);
}
static void
run_set_agc(struct run_softc *sc, uint8_t agc)
{
uint8_t bbp;
if (sc->mac_ver == 0x3572) {
run_bbp_read(sc, 27, &bbp);
bbp &= ~(0x3 << 5);
run_bbp_write(sc, 27, bbp | 0 << 5); /* select Rx0 */
run_bbp_write(sc, 66, agc);
run_bbp_write(sc, 27, bbp | 1 << 5); /* select Rx1 */
run_bbp_write(sc, 66, agc);
} else
run_bbp_write(sc, 66, agc);
}
static void
run_select_chan_group(struct run_softc *sc, int group)
{
uint32_t tmp;
uint8_t agc;
run_bbp_write(sc, 62, 0x37 - sc->lna[group]);
run_bbp_write(sc, 63, 0x37 - sc->lna[group]);
run_bbp_write(sc, 64, 0x37 - sc->lna[group]);
run_bbp_write(sc, 86, 0x00);
if (group == 0) {
if (sc->ext_2ghz_lna) {
run_bbp_write(sc, 82, 0x62);
run_bbp_write(sc, 75, 0x46);
} else {
run_bbp_write(sc, 82, 0x84);
run_bbp_write(sc, 75, 0x50);
}
} else {
if (sc->mac_ver == 0x3572)
run_bbp_write(sc, 82, 0x94);
else
run_bbp_write(sc, 82, 0xf2);
if (sc->ext_5ghz_lna)
run_bbp_write(sc, 75, 0x46);
else
run_bbp_write(sc, 75, 0x50);
}
run_read(sc, RT2860_TX_BAND_CFG, &tmp);
tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P);
tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P;
run_write(sc, RT2860_TX_BAND_CFG, tmp);
/* enable appropriate Power Amplifiers and Low Noise Amplifiers */
tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN;
if (sc->nrxchains > 1)
tmp |= RT2860_LNA_PE1_EN;
if (group == 0) { /* 2GHz */
tmp |= RT2860_PA_PE_G0_EN;
if (sc->ntxchains > 1)
tmp |= RT2860_PA_PE_G1_EN;
} else { /* 5GHz */
tmp |= RT2860_PA_PE_A0_EN;
if (sc->ntxchains > 1)
tmp |= RT2860_PA_PE_A1_EN;
}
if (sc->mac_ver == 0x3572) {
run_rt3070_rf_write(sc, 8, 0x00);
run_write(sc, RT2860_TX_PIN_CFG, tmp);
run_rt3070_rf_write(sc, 8, 0x80);
} else
run_write(sc, RT2860_TX_PIN_CFG, tmp);
/* set initial AGC value */
if (group == 0) { /* 2GHz band */
if (sc->mac_ver >= 0x3070)
agc = 0x1c + sc->lna[0] * 2;
else
agc = 0x2e + sc->lna[0];
} else { /* 5GHz band */
if (sc->mac_ver == 0x3572)
agc = 0x22 + (sc->lna[group] * 5) / 3;
else
agc = 0x32 + (sc->lna[group] * 5) / 3;
}
run_set_agc(sc, agc);
}
static void
run_rt2870_set_chan(struct run_softc *sc, uint32_t chan)
{
const struct rfprog *rfprog = rt2860_rf2850;
uint32_t r2, r3, r4;
int8_t txpow1, txpow2;
int i;
/* find the settings for this channel (we know it exists) */
for (i = 0; rfprog[i].chan != chan; i++);
r2 = rfprog[i].r2;
if (sc->ntxchains == 1)
r2 |= 1 << 12; /* 1T: disable Tx chain 2 */
if (sc->nrxchains == 1)
r2 |= 1 << 15 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */
else if (sc->nrxchains == 2)
r2 |= 1 << 4; /* 2R: disable Rx chain 3 */
/* use Tx power values from EEPROM */
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
if (chan > 14) {
if (txpow1 >= 0)
txpow1 = txpow1 << 1 | 1;
else
txpow1 = (7 + txpow1) << 1;
if (txpow2 >= 0)
txpow2 = txpow2 << 1 | 1;
else
txpow2 = (7 + txpow2) << 1;
}
r3 = rfprog[i].r3 | txpow1 << 7;
r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4;
run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1);
run_rt2870_rf_write(sc, RT2860_RF2, r2);
run_rt2870_rf_write(sc, RT2860_RF3, r3);
run_rt2870_rf_write(sc, RT2860_RF4, r4);
run_delay(sc, 10);
run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1);
run_rt2870_rf_write(sc, RT2860_RF2, r2);
run_rt2870_rf_write(sc, RT2860_RF3, r3 | 1);
run_rt2870_rf_write(sc, RT2860_RF4, r4);
run_delay(sc, 10);
run_rt2870_rf_write(sc, RT2860_RF1, rfprog[i].r1);
run_rt2870_rf_write(sc, RT2860_RF2, r2);
run_rt2870_rf_write(sc, RT2860_RF3, r3);
run_rt2870_rf_write(sc, RT2860_RF4, r4);
}
static void
run_rt3070_set_chan(struct run_softc *sc, uint32_t chan)
{
int8_t txpow1, txpow2;
uint8_t rf;
int i;
/* RT3070 is 2GHz only */
KASSERT(chan >= 1 && chan <= 14, ("wrong channel selected\n"));
/* find the settings for this channel (we know it exists) */
for (i = 0; rt2860_rf2850[i].chan != chan; i++);
/* use Tx power values from EEPROM */
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n);
run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k);
run_rt3070_rf_read(sc, 6, &rf);
rf = (rf & ~0x03) | rt3070_freqs[i].r;
run_rt3070_rf_write(sc, 6, rf);
/* set Tx0 power */
run_rt3070_rf_read(sc, 12, &rf);
rf = (rf & ~0x1f) | txpow1;
run_rt3070_rf_write(sc, 12, rf);
/* set Tx1 power */
run_rt3070_rf_read(sc, 13, &rf);
rf = (rf & ~0x1f) | txpow2;
run_rt3070_rf_write(sc, 13, rf);
run_rt3070_rf_read(sc, 1, &rf);
rf &= ~0xfc;
if (sc->ntxchains == 1)
rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */
else if (sc->ntxchains == 2)
rf |= 1 << 7; /* 2T: disable Tx chain 3 */
if (sc->nrxchains == 1)
rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */
else if (sc->nrxchains == 2)
rf |= 1 << 6; /* 2R: disable Rx chain 3 */
run_rt3070_rf_write(sc, 1, rf);
/* set RF offset */
run_rt3070_rf_read(sc, 23, &rf);
rf = (rf & ~0x7f) | sc->freq;
run_rt3070_rf_write(sc, 23, rf);
/* program RF filter */
run_rt3070_rf_read(sc, 24, &rf); /* Tx */
rf = (rf & ~0x3f) | sc->rf24_20mhz;
run_rt3070_rf_write(sc, 24, rf);
run_rt3070_rf_read(sc, 31, &rf); /* Rx */
rf = (rf & ~0x3f) | sc->rf24_20mhz;
run_rt3070_rf_write(sc, 31, rf);
/* enable RF tuning */
run_rt3070_rf_read(sc, 7, &rf);
run_rt3070_rf_write(sc, 7, rf | 0x01);
}
static void
run_rt3572_set_chan(struct run_softc *sc, u_int chan)
{
int8_t txpow1, txpow2;
uint32_t tmp;
uint8_t rf;
int i;
/* find the settings for this channel (we know it exists) */
for (i = 0; rt2860_rf2850[i].chan != chan; i++);
/* use Tx power values from EEPROM */
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
if (chan <= 14) {
run_bbp_write(sc, 25, sc->bbp25);
run_bbp_write(sc, 26, sc->bbp26);
} else {
/* enable IQ phase correction */
run_bbp_write(sc, 25, 0x09);
run_bbp_write(sc, 26, 0xff);
}
run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n);
run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k);
run_rt3070_rf_read(sc, 6, &rf);
rf = (rf & ~0x0f) | rt3070_freqs[i].r;
rf |= (chan <= 14) ? 0x08 : 0x04;
run_rt3070_rf_write(sc, 6, rf);
/* set PLL mode */
run_rt3070_rf_read(sc, 5, &rf);
rf &= ~(0x08 | 0x04);
rf |= (chan <= 14) ? 0x04 : 0x08;
run_rt3070_rf_write(sc, 5, rf);
/* set Tx power for chain 0 */
if (chan <= 14)
rf = 0x60 | txpow1;
else
rf = 0xe0 | (txpow1 & 0xc) << 1 | (txpow1 & 0x3);
run_rt3070_rf_write(sc, 12, rf);
/* set Tx power for chain 1 */
if (chan <= 14)
rf = 0x60 | txpow2;
else
rf = 0xe0 | (txpow2 & 0xc) << 1 | (txpow2 & 0x3);
run_rt3070_rf_write(sc, 13, rf);
/* set Tx/Rx streams */
run_rt3070_rf_read(sc, 1, &rf);
rf &= ~0xfc;
if (sc->ntxchains == 1)
rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */
else if (sc->ntxchains == 2)
rf |= 1 << 7; /* 2T: disable Tx chain 3 */
if (sc->nrxchains == 1)
rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */
else if (sc->nrxchains == 2)
rf |= 1 << 6; /* 2R: disable Rx chain 3 */
run_rt3070_rf_write(sc, 1, rf);
/* set RF offset */
run_rt3070_rf_read(sc, 23, &rf);
rf = (rf & ~0x7f) | sc->freq;
run_rt3070_rf_write(sc, 23, rf);
/* program RF filter */
rf = sc->rf24_20mhz;
run_rt3070_rf_write(sc, 24, rf); /* Tx */
run_rt3070_rf_write(sc, 31, rf); /* Rx */
/* enable RF tuning */
run_rt3070_rf_read(sc, 7, &rf);
rf = (chan <= 14) ? 0xd8 : ((rf & ~0xc8) | 0x14);
run_rt3070_rf_write(sc, 7, rf);
/* TSSI */
rf = (chan <= 14) ? 0xc3 : 0xc0;
run_rt3070_rf_write(sc, 9, rf);
/* set loop filter 1 */
run_rt3070_rf_write(sc, 10, 0xf1);
/* set loop filter 2 */
run_rt3070_rf_write(sc, 11, (chan <= 14) ? 0xb9 : 0x00);
/* set tx_mx2_ic */
run_rt3070_rf_write(sc, 15, (chan <= 14) ? 0x53 : 0x43);
/* set tx_mx1_ic */
if (chan <= 14)
rf = 0x48 | sc->txmixgain_2ghz;
else
rf = 0x78 | sc->txmixgain_5ghz;
run_rt3070_rf_write(sc, 16, rf);
/* set tx_lo1 */
run_rt3070_rf_write(sc, 17, 0x23);
/* set tx_lo2 */
if (chan <= 14)
rf = 0x93;
else if (chan <= 64)
rf = 0xb7;
else if (chan <= 128)
rf = 0x74;
else
rf = 0x72;
run_rt3070_rf_write(sc, 19, rf);
/* set rx_lo1 */
if (chan <= 14)
rf = 0xb3;
else if (chan <= 64)
rf = 0xf6;
else if (chan <= 128)
rf = 0xf4;
else
rf = 0xf3;
run_rt3070_rf_write(sc, 20, rf);
/* set pfd_delay */
if (chan <= 14)
rf = 0x15;
else if (chan <= 64)
rf = 0x3d;
else
rf = 0x01;
run_rt3070_rf_write(sc, 25, rf);
/* set rx_lo2 */
run_rt3070_rf_write(sc, 26, (chan <= 14) ? 0x85 : 0x87);
/* set ldo_rf_vc */
run_rt3070_rf_write(sc, 27, (chan <= 14) ? 0x00 : 0x01);
/* set drv_cc */
run_rt3070_rf_write(sc, 29, (chan <= 14) ? 0x9b : 0x9f);
run_read(sc, RT2860_GPIO_CTRL, &tmp);
tmp &= ~0x8080;
if (chan <= 14)
tmp |= 0x80;
run_write(sc, RT2860_GPIO_CTRL, tmp);
/* enable RF tuning */
run_rt3070_rf_read(sc, 7, &rf);
run_rt3070_rf_write(sc, 7, rf | 0x01);
run_delay(sc, 2);
}
static void
run_set_rx_antenna(struct run_softc *sc, int aux)
{
uint32_t tmp;
if (aux) {
run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 0);
run_read(sc, RT2860_GPIO_CTRL, &tmp);
run_write(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08);
} else {
run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 1);
run_read(sc, RT2860_GPIO_CTRL, &tmp);
run_write(sc, RT2860_GPIO_CTRL, tmp & ~0x0808);
}
}
static int
run_set_chan(struct run_softc *sc, struct ieee80211_channel *c)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
uint32_t chan, group;
chan = ieee80211_chan2ieee(ic, c);
if (chan == 0 || chan == IEEE80211_CHAN_ANY)
return (EINVAL);
if (sc->mac_ver == 0x3572)
run_rt3572_set_chan(sc, chan);
else if (sc->mac_ver >= 0x3070)
run_rt3070_set_chan(sc, chan);
else
run_rt2870_set_chan(sc, chan);
/* determine channel group */
if (chan <= 14)
group = 0;
else if (chan <= 64)
group = 1;
else if (chan <= 128)
group = 2;
else
group = 3;
/* XXX necessary only when group has changed! */
run_select_chan_group(sc, group);
run_delay(sc, 10);
return (0);
}
static void
run_set_channel(struct ieee80211com *ic)
{
struct run_softc *sc = ic->ic_ifp->if_softc;
RUN_LOCK(sc);
run_set_chan(sc, ic->ic_curchan);
RUN_UNLOCK(sc);
return;
}
static void
run_scan_start(struct ieee80211com *ic)
{
struct run_softc *sc = ic->ic_ifp->if_softc;
uint32_t tmp;
RUN_LOCK(sc);
/* abort TSF synchronization */
run_read(sc, RT2860_BCN_TIME_CFG, &tmp);
run_write(sc, RT2860_BCN_TIME_CFG,
tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
RT2860_TBTT_TIMER_EN));
run_set_bssid(sc, sc->sc_ifp->if_broadcastaddr);
RUN_UNLOCK(sc);
return;
}
static void
run_scan_end(struct ieee80211com *ic)
{
struct run_softc *sc = ic->ic_ifp->if_softc;
RUN_LOCK(sc);
run_enable_tsf_sync(sc);
/* XXX keep local copy */
run_set_bssid(sc, sc->sc_bssid);
RUN_UNLOCK(sc);
return;
}
/*
* Could be called from ieee80211_node_timeout()
* (non-sleepable thread)
*/
static void
run_update_beacon(struct ieee80211vap *vap, int item)
{
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct run_vap *rvp = RUN_VAP(vap);
int mcast = 0;
uint32_t i;
KASSERT(vap != NULL, ("no beacon"));
switch (item) {
case IEEE80211_BEACON_ERP:
run_updateslot(ic->ic_ifp);
break;
case IEEE80211_BEACON_HTINFO:
run_updateprot(ic);
break;
case IEEE80211_BEACON_TIM:
mcast = 1; /*TODO*/
break;
default:
break;
}
setbit(rvp->bo.bo_flags, item);
ieee80211_beacon_update(vap->iv_bss, &rvp->bo, rvp->beacon_mbuf, mcast);
i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_update_beacon_cb;
sc->cmdq[i].arg0 = vap;
ieee80211_runtask(ic, &sc->cmdq_task);
return;
}
static void
run_update_beacon_cb(void *arg)
{
struct ieee80211vap *vap = arg;
struct run_vap *rvp = RUN_VAP(vap);
struct ieee80211com *ic = vap->iv_ic;
struct run_softc *sc = ic->ic_ifp->if_softc;
struct rt2860_txwi txwi;
struct mbuf *m;
uint8_t ridx;
if (vap->iv_bss->ni_chan == IEEE80211_CHAN_ANYC)
return;
if (ic->ic_bsschan == IEEE80211_CHAN_ANYC)
return;
/*
* No need to call ieee80211_beacon_update(), run_update_beacon()
* is taking care of apropriate calls.
*/
if (rvp->beacon_mbuf == NULL) {
rvp->beacon_mbuf = ieee80211_beacon_alloc(vap->iv_bss,
&rvp->bo);
if (rvp->beacon_mbuf == NULL)
return;
}
m = rvp->beacon_mbuf;
memset(&txwi, 0, sizeof txwi);
txwi.wcid = 0xff;
txwi.len = htole16(m->m_pkthdr.len);
/* send beacons at the lowest available rate */
ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
txwi.phy = htole16(rt2860_rates[ridx].mcs);
if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM)
txwi.phy |= htole16(RT2860_PHY_OFDM);
txwi.txop = RT2860_TX_TXOP_HT;
txwi.flags = RT2860_TX_TS;
txwi.xflags = RT2860_TX_NSEQ;
run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id),
(uint8_t *)&txwi, sizeof txwi);
run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id) + sizeof txwi,
mtod(m, uint8_t *), (m->m_pkthdr.len + 1) & ~1); /* roundup len */
return;
}
static void
run_updateprot(struct ieee80211com *ic)
{
struct run_softc *sc = ic->ic_ifp->if_softc;
uint32_t i;
i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_updateprot_cb;
sc->cmdq[i].arg0 = ic;
ieee80211_runtask(ic, &sc->cmdq_task);
}
static void
run_updateprot_cb(void *arg)
{
struct ieee80211com *ic = arg;
struct run_softc *sc = ic->ic_ifp->if_softc;
uint32_t tmp;
tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL;
/* setup protection frame rate (MCS code) */
tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ?
rt2860_rates[RT2860_RIDX_OFDM6].mcs :
rt2860_rates[RT2860_RIDX_CCK11].mcs;
/* CCK frames don't require protection */
run_write(sc, RT2860_CCK_PROT_CFG, tmp);
if (ic->ic_flags & IEEE80211_F_USEPROT) {
if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
tmp |= RT2860_PROT_CTRL_RTS_CTS;
else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
tmp |= RT2860_PROT_CTRL_CTS;
}
run_write(sc, RT2860_OFDM_PROT_CFG, tmp);
}
static void
run_usb_timeout_cb(void *arg)
{
struct ieee80211vap *vap = arg;
struct run_softc *sc = vap->iv_ic->ic_ifp->if_softc;
RUN_LOCK_ASSERT(sc, MA_OWNED);
if(vap->iv_state == IEEE80211_S_RUN &&
vap->iv_opmode != IEEE80211_M_STA)
run_reset_livelock(sc);
else if (vap->iv_state == IEEE80211_S_SCAN) {
DPRINTF("timeout caused by scan\n");
/* cancel bgscan */
ieee80211_cancel_scan(vap);
} else
DPRINTF("timeout by unknown cause\n");
}
static void
run_reset_livelock(struct run_softc *sc)
{
uint32_t tmp;
RUN_LOCK_ASSERT(sc, MA_OWNED);
/*
* In IBSS or HostAP modes (when the hardware sends beacons), the MAC
* can run into a livelock and start sending CTS-to-self frames like
* crazy if protection is enabled. Reset MAC/BBP for a while
*/
run_read(sc, RT2860_DEBUG, &tmp);
DPRINTFN(3, "debug reg %08x\n", tmp);
if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) {
DPRINTF("CTS-to-self livelock detected\n");
run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST);
run_delay(sc, 1);
run_write(sc, RT2860_MAC_SYS_CTRL,
RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
}
}
static void
run_update_promisc_locked(struct ifnet *ifp)
{
struct run_softc *sc = ifp->if_softc;
uint32_t tmp;
run_read(sc, RT2860_RX_FILTR_CFG, &tmp);
tmp |= RT2860_DROP_UC_NOME;
if (ifp->if_flags & IFF_PROMISC)
tmp &= ~RT2860_DROP_UC_NOME;
run_write(sc, RT2860_RX_FILTR_CFG, tmp);
DPRINTF("%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
"entering" : "leaving");
}
static void
run_update_promisc(struct ifnet *ifp)
{
struct run_softc *sc = ifp->if_softc;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
return;
RUN_LOCK(sc);
run_update_promisc_locked(ifp);
RUN_UNLOCK(sc);
}
static void
run_enable_tsf_sync(struct run_softc *sc)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
uint32_t tmp;
DPRINTF("rvp_id=%d ic_opmode=%d\n", RUN_VAP(vap)->rvp_id, ic->ic_opmode);
run_read(sc, RT2860_BCN_TIME_CFG, &tmp);
tmp &= ~0x1fffff;
tmp |= vap->iv_bss->ni_intval * 16;
tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN;
if (ic->ic_opmode == IEEE80211_M_STA) {
/*
* Local TSF is always updated with remote TSF on beacon
* reception.
*/
tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT;
} else if (ic->ic_opmode == IEEE80211_M_IBSS) {
tmp |= RT2860_BCN_TX_EN;
/*
* Local TSF is updated with remote TSF on beacon reception
* only if the remote TSF is greater than local TSF.
*/
tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT;
} else if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
ic->ic_opmode == IEEE80211_M_MBSS) {
tmp |= RT2860_BCN_TX_EN;
/* SYNC with nobody */
tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT;
} else {
DPRINTF("Enabling TSF failed. undefined opmode\n");
return;
}
run_write(sc, RT2860_BCN_TIME_CFG, tmp);
}
static void
run_enable_mrr(struct run_softc *sc)
{
#define CCK(mcs) (mcs)
#define OFDM(mcs) (1 << 3 | (mcs))
run_write(sc, RT2860_LG_FBK_CFG0,
OFDM(6) << 28 | /* 54->48 */
OFDM(5) << 24 | /* 48->36 */
OFDM(4) << 20 | /* 36->24 */
OFDM(3) << 16 | /* 24->18 */
OFDM(2) << 12 | /* 18->12 */
OFDM(1) << 8 | /* 12-> 9 */
OFDM(0) << 4 | /* 9-> 6 */
OFDM(0)); /* 6-> 6 */
run_write(sc, RT2860_LG_FBK_CFG1,
CCK(2) << 12 | /* 11->5.5 */
CCK(1) << 8 | /* 5.5-> 2 */
CCK(0) << 4 | /* 2-> 1 */
CCK(0)); /* 1-> 1 */
#undef OFDM
#undef CCK
}
static void
run_set_txpreamble(struct run_softc *sc)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
uint32_t tmp;
run_read(sc, RT2860_AUTO_RSP_CFG, &tmp);
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
tmp |= RT2860_CCK_SHORT_EN;
else
tmp &= ~RT2860_CCK_SHORT_EN;
run_write(sc, RT2860_AUTO_RSP_CFG, tmp);
}
static void
run_set_basicrates(struct run_softc *sc)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
/* set basic rates mask */
if (ic->ic_curmode == IEEE80211_MODE_11B)
run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x003);
else if (ic->ic_curmode == IEEE80211_MODE_11A)
run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x150);
else /* 11g */
run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x15f);
}
static void
run_set_leds(struct run_softc *sc, uint16_t which)
{
(void)run_mcu_cmd(sc, RT2860_MCU_CMD_LEDS,
which | (sc->leds & 0x7f));
}
static void
run_set_bssid(struct run_softc *sc, const uint8_t *bssid)
{
run_write(sc, RT2860_MAC_BSSID_DW0,
bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24);
run_write(sc, RT2860_MAC_BSSID_DW1,
bssid[4] | bssid[5] << 8);
}
static void
run_set_macaddr(struct run_softc *sc, const uint8_t *addr)
{
run_write(sc, RT2860_MAC_ADDR_DW0,
addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24);
run_write(sc, RT2860_MAC_ADDR_DW1,
addr[4] | addr[5] << 8 | 0xff << 16);
}
static void
run_updateslot(struct ifnet *ifp)
{
struct run_softc *sc = ifp->if_softc;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t i;
i = RUN_CMDQ_GET(&sc->cmdq_store);
DPRINTF("cmdq_store=%d\n", i);
sc->cmdq[i].func = run_updateslot_cb;
sc->cmdq[i].arg0 = ifp;
ieee80211_runtask(ic, &sc->cmdq_task);
return;
}
/* ARGSUSED */
static void
run_updateslot_cb(void *arg)
{
struct ifnet *ifp = arg;
struct run_softc *sc = ifp->if_softc;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t tmp;
run_read(sc, RT2860_BKOFF_SLOT_CFG, &tmp);
tmp &= ~0xff;
tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
run_write(sc, RT2860_BKOFF_SLOT_CFG, tmp);
}
static void
run_update_mcast(struct ifnet *ifp)
{
/* h/w filter supports getting everything or nothing */
ifp->if_flags |= IFF_ALLMULTI;
}
static int8_t
run_rssi2dbm(struct run_softc *sc, uint8_t rssi, uint8_t rxchain)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211_channel *c = ic->ic_curchan;
int delta;
if (IEEE80211_IS_CHAN_5GHZ(c)) {
uint32_t chan = ieee80211_chan2ieee(ic, c);
delta = sc->rssi_5ghz[rxchain];
/* determine channel group */
if (chan <= 64)
delta -= sc->lna[1];
else if (chan <= 128)
delta -= sc->lna[2];
else
delta -= sc->lna[3];
} else
delta = sc->rssi_2ghz[rxchain] - sc->lna[0];
return (-12 - delta - rssi);
}
static int
run_bbp_init(struct run_softc *sc)
{
int i, error, ntries;
uint8_t bbp0;
/* wait for BBP to wake up */
for (ntries = 0; ntries < 20; ntries++) {
if ((error = run_bbp_read(sc, 0, &bbp0)) != 0)
return error;
if (bbp0 != 0 && bbp0 != 0xff)
break;
}
if (ntries == 20)
return (ETIMEDOUT);
/* initialize BBP registers to default values */
for (i = 0; i < N(rt2860_def_bbp); i++) {
run_bbp_write(sc, rt2860_def_bbp[i].reg,
rt2860_def_bbp[i].val);
}
/* fix BBP84 for RT2860E */
if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101)
run_bbp_write(sc, 84, 0x19);
if (sc->mac_ver >= 0x3070) {
run_bbp_write(sc, 79, 0x13);
run_bbp_write(sc, 80, 0x05);
run_bbp_write(sc, 81, 0x33);
} else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) {
run_bbp_write(sc, 69, 0x16);
run_bbp_write(sc, 73, 0x12);
}
return (0);
}
static int
run_rt3070_rf_init(struct run_softc *sc)
{
uint32_t tmp;
uint8_t rf, target, bbp4;
int i;
run_rt3070_rf_read(sc, 30, &rf);
/* toggle RF R30 bit 7 */
run_rt3070_rf_write(sc, 30, rf | 0x80);
run_delay(sc, 10);
run_rt3070_rf_write(sc, 30, rf & ~0x80);
/* initialize RF registers to default value */
if (sc->mac_ver == 0x3572) {
for (i = 0; i < N(rt3572_def_rf); i++) {
run_rt3070_rf_write(sc, rt3572_def_rf[i].reg,
rt3572_def_rf[i].val);
}
} else {
for (i = 0; i < N(rt3070_def_rf); i++) {
run_rt3070_rf_write(sc, rt3070_def_rf[i].reg,
rt3070_def_rf[i].val);
}
}
if (sc->mac_ver == 0x3070) {
/* change voltage from 1.2V to 1.35V for RT3070 */
run_read(sc, RT3070_LDO_CFG0, &tmp);
tmp = (tmp & ~0x0f000000) | 0x0d000000;
run_write(sc, RT3070_LDO_CFG0, tmp);
} else if (sc->mac_ver == 0x3071) {
run_rt3070_rf_read(sc, 6, &rf);
run_rt3070_rf_write(sc, 6, rf | 0x40);
run_rt3070_rf_write(sc, 31, 0x14);
run_read(sc, RT3070_LDO_CFG0, &tmp);
tmp &= ~0x1f000000;
if (sc->mac_rev < 0x0211)
tmp |= 0x0d000000; /* 1.3V */
else
tmp |= 0x01000000; /* 1.2V */
run_write(sc, RT3070_LDO_CFG0, tmp);
/* patch LNA_PE_G1 */
run_read(sc, RT3070_GPIO_SWITCH, &tmp);
run_write(sc, RT3070_GPIO_SWITCH, tmp & ~0x20);
} else if (sc->mac_ver == 0x3572) {
run_rt3070_rf_read(sc, 6, &rf);
run_rt3070_rf_write(sc, 6, rf | 0x40);
/* increase voltage from 1.2V to 1.35V */
run_read(sc, RT3070_LDO_CFG0, &tmp);
tmp = (tmp & ~0x1f000000) | 0x0d000000;
run_write(sc, RT3070_LDO_CFG0, tmp);
if (sc->mac_rev < 0x0211 || !sc->patch_dac) {
run_delay(sc, 1); /* wait for 1msec */
/* decrease voltage back to 1.2V */
tmp = (tmp & ~0x1f000000) | 0x01000000;
run_write(sc, RT3070_LDO_CFG0, tmp);
}
}
/* select 20MHz bandwidth */
run_rt3070_rf_read(sc, 31, &rf);
run_rt3070_rf_write(sc, 31, rf & ~0x20);
/* calibrate filter for 20MHz bandwidth */
sc->rf24_20mhz = 0x1f; /* default value */
target = (sc->mac_ver < 0x3071) ? 0x16 : 0x13;
run_rt3070_filter_calib(sc, 0x07, target, &sc->rf24_20mhz);
/* select 40MHz bandwidth */
run_bbp_read(sc, 4, &bbp4);
run_bbp_write(sc, 4, (bbp4 & ~0x08) | 0x10);
run_rt3070_rf_read(sc, 31, &rf);
run_rt3070_rf_write(sc, 31, rf | 0x20);
/* calibrate filter for 40MHz bandwidth */
sc->rf24_40mhz = 0x2f; /* default value */
target = (sc->mac_ver < 0x3071) ? 0x19 : 0x15;
run_rt3070_filter_calib(sc, 0x27, target, &sc->rf24_40mhz);
/* go back to 20MHz bandwidth */
run_bbp_read(sc, 4, &bbp4);
run_bbp_write(sc, 4, bbp4 & ~0x18);
if (sc->mac_ver == 0x3572) {
/* save default BBP registers 25 and 26 values */
run_bbp_read(sc, 25, &sc->bbp25);
run_bbp_read(sc, 26, &sc->bbp26);
} else if (sc->mac_rev < 0x0211)
run_rt3070_rf_write(sc, 27, 0x03);
run_read(sc, RT3070_OPT_14, &tmp);
run_write(sc, RT3070_OPT_14, tmp | 1);
if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) {
run_rt3070_rf_read(sc, 17, &rf);
rf &= ~RT3070_TX_LO1;
if ((sc->mac_ver == 0x3070 ||
(sc->mac_ver == 0x3071 && sc->mac_rev >= 0x0211)) &&
!sc->ext_2ghz_lna)
rf |= 0x20; /* fix for long range Rx issue */
if (sc->txmixgain_2ghz >= 1)
rf = (rf & ~0x7) | sc->txmixgain_2ghz;
run_rt3070_rf_write(sc, 17, rf);
}
if (sc->mac_rev == 0x3071) {
run_rt3070_rf_read(sc, 1, &rf);
rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD);
rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD;
run_rt3070_rf_write(sc, 1, rf);
run_rt3070_rf_read(sc, 15, &rf);
run_rt3070_rf_write(sc, 15, rf & ~RT3070_TX_LO2);
run_rt3070_rf_read(sc, 20, &rf);
run_rt3070_rf_write(sc, 20, rf & ~RT3070_RX_LO1);
run_rt3070_rf_read(sc, 21, &rf);
run_rt3070_rf_write(sc, 21, rf & ~RT3070_RX_LO2);
}
if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) {
/* fix Tx to Rx IQ glitch by raising RF voltage */
run_rt3070_rf_read(sc, 27, &rf);
rf &= ~0x77;
if (sc->mac_rev < 0x0211)
rf |= 0x03;
run_rt3070_rf_write(sc, 27, rf);
}
return (0);
}
static int
run_rt3070_filter_calib(struct run_softc *sc, uint8_t init, uint8_t target,
uint8_t *val)
{
uint8_t rf22, rf24;
uint8_t bbp55_pb, bbp55_sb, delta;
int ntries;
/* program filter */
run_rt3070_rf_read(sc, 24, &rf24);
rf24 = (rf24 & 0xc0) | init; /* initial filter value */
run_rt3070_rf_write(sc, 24, rf24);
/* enable baseband loopback mode */
run_rt3070_rf_read(sc, 22, &rf22);
run_rt3070_rf_write(sc, 22, rf22 | 0x01);
/* set power and frequency of passband test tone */
run_bbp_write(sc, 24, 0x00);
for (ntries = 0; ntries < 100; ntries++) {
/* transmit test tone */
run_bbp_write(sc, 25, 0x90);
run_delay(sc, 10);
/* read received power */
run_bbp_read(sc, 55, &bbp55_pb);
if (bbp55_pb != 0)
break;
}
if (ntries == 100)
return ETIMEDOUT;
/* set power and frequency of stopband test tone */
run_bbp_write(sc, 24, 0x06);
for (ntries = 0; ntries < 100; ntries++) {
/* transmit test tone */
run_bbp_write(sc, 25, 0x90);
run_delay(sc, 10);
/* read received power */
run_bbp_read(sc, 55, &bbp55_sb);
delta = bbp55_pb - bbp55_sb;
if (delta > target)
break;
/* reprogram filter */
rf24++;
run_rt3070_rf_write(sc, 24, rf24);
}
if (ntries < 100) {
if (rf24 != init)
rf24--; /* backtrack */
*val = rf24;
run_rt3070_rf_write(sc, 24, rf24);
}
/* restore initial state */
run_bbp_write(sc, 24, 0x00);
/* disable baseband loopback mode */
run_rt3070_rf_read(sc, 22, &rf22);
run_rt3070_rf_write(sc, 22, rf22 & ~0x01);
return (0);
}
static void
run_rt3070_rf_setup(struct run_softc *sc)
{
uint8_t bbp, rf;
int i;
if (sc->mac_ver == 0x3572) {
/* enable DC filter */
if (sc->mac_rev >= 0x0201)
run_bbp_write(sc, 103, 0xc0);
run_bbp_read(sc, 138, &bbp);
if (sc->ntxchains == 1)
bbp |= 0x20; /* turn off DAC1 */
if (sc->nrxchains == 1)
bbp &= ~0x02; /* turn off ADC1 */
run_bbp_write(sc, 138, bbp);
if (sc->mac_rev >= 0x0211) {
/* improve power consumption */
run_bbp_read(sc, 31, &bbp);
run_bbp_write(sc, 31, bbp & ~0x03);
}
run_rt3070_rf_read(sc, 16, &rf);
rf = (rf & ~0x07) | sc->txmixgain_2ghz;
run_rt3070_rf_write(sc, 16, rf);
} else if (sc->mac_ver == 0x3071) {
/* enable DC filter */
if (sc->mac_rev >= 0x0201)
run_bbp_write(sc, 103, 0xc0);
run_bbp_read(sc, 138, &bbp);
if (sc->ntxchains == 1)
bbp |= 0x20; /* turn off DAC1 */
if (sc->nrxchains == 1)
bbp &= ~0x02; /* turn off ADC1 */
run_bbp_write(sc, 138, bbp);
if (sc->mac_rev >= 0x0211) {
/* improve power consumption */
run_bbp_read(sc, 31, &bbp);
run_bbp_write(sc, 31, bbp & ~0x03);
}
run_write(sc, RT2860_TX_SW_CFG1, 0);
if (sc->mac_rev < 0x0211) {
run_write(sc, RT2860_TX_SW_CFG2,
sc->patch_dac ? 0x2c : 0x0f);
} else
run_write(sc, RT2860_TX_SW_CFG2, 0);
} else if (sc->mac_ver == 0x3070) {
if (sc->mac_rev >= 0x0201) {
/* enable DC filter */
run_bbp_write(sc, 103, 0xc0);
/* improve power consumption */
run_bbp_read(sc, 31, &bbp);
run_bbp_write(sc, 31, bbp & ~0x03);
}
if (sc->mac_rev < 0x0211) {
run_write(sc, RT2860_TX_SW_CFG1, 0);
run_write(sc, RT2860_TX_SW_CFG2, 0x2c);
} else
run_write(sc, RT2860_TX_SW_CFG2, 0);
}
/* initialize RF registers from ROM for >=RT3071*/
if (sc->mac_ver >= 0x3071) {
for (i = 0; i < 10; i++) {
if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff)
continue;
run_rt3070_rf_write(sc, sc->rf[i].reg, sc->rf[i].val);
}
}
}
static int
run_txrx_enable(struct run_softc *sc)
{
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
uint32_t tmp;
int error, ntries;
run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN);
for (ntries = 0; ntries < 200; ntries++) {
if ((error = run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp)) != 0)
return error;
if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
break;
run_delay(sc, 50);
}
if (ntries == 200)
return ETIMEDOUT;
run_delay(sc, 50);
tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | RT2860_TX_WB_DDONE;
run_write(sc, RT2860_WPDMA_GLO_CFG, tmp);
/* enable Rx bulk aggregation (set timeout and limit) */
tmp = RT2860_USB_TX_EN | RT2860_USB_RX_EN | RT2860_USB_RX_AGG_EN |
RT2860_USB_RX_AGG_TO(128) | RT2860_USB_RX_AGG_LMT(2);
run_write(sc, RT2860_USB_DMA_CFG, tmp);
/* set Rx filter */
tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR;
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL |
RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK |
RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV |
RT2860_DROP_CFACK | RT2860_DROP_CFEND;
if (ic->ic_opmode == IEEE80211_M_STA)
tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL;
}
run_write(sc, RT2860_RX_FILTR_CFG, tmp);
run_write(sc, RT2860_MAC_SYS_CTRL,
RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
return (0);
}
static void
run_init_locked(struct run_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t tmp;
uint8_t bbp1, bbp3;
int i;
int ridx;
int ntries;
if (ic->ic_nrunning > 1)
return;
run_stop(sc);
if (run_load_microcode(sc) != 0) {
device_printf(sc->sc_dev, "could not load 8051 microcode\n");
goto fail;
}
for (ntries = 0; ntries < 100; ntries++) {
if (run_read(sc, RT2860_ASIC_VER_ID, &tmp) != 0)
goto fail;
if (tmp != 0 && tmp != 0xffffffff)
break;
run_delay(sc, 10);
}
if (ntries == 100)
goto fail;
for (i = 0; i != RUN_EP_QUEUES; i++)
run_setup_tx_list(sc, &sc->sc_epq[i]);
run_set_macaddr(sc, IF_LLADDR(ifp));
for (ntries = 0; ntries < 100; ntries++) {
if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0)
goto fail;
if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
break;
run_delay(sc, 10);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "timeout waiting for DMA engine\n");
goto fail;
}
tmp &= 0xff0;
tmp |= RT2860_TX_WB_DDONE;
run_write(sc, RT2860_WPDMA_GLO_CFG, tmp);
/* turn off PME_OEN to solve high-current issue */
run_read(sc, RT2860_SYS_CTRL, &tmp);
run_write(sc, RT2860_SYS_CTRL, tmp & ~RT2860_PME_OEN);
run_write(sc, RT2860_MAC_SYS_CTRL,
RT2860_BBP_HRST | RT2860_MAC_SRST);
run_write(sc, RT2860_USB_DMA_CFG, 0);
if (run_reset(sc) != 0) {
device_printf(sc->sc_dev, "could not reset chipset\n");
goto fail;
}
run_write(sc, RT2860_MAC_SYS_CTRL, 0);
/* init Tx power for all Tx rates (from EEPROM) */
for (ridx = 0; ridx < 5; ridx++) {
if (sc->txpow20mhz[ridx] == 0xffffffff)
continue;
run_write(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]);
}
for (i = 0; i < N(rt2870_def_mac); i++)
run_write(sc, rt2870_def_mac[i].reg, rt2870_def_mac[i].val);
run_write(sc, RT2860_WMM_AIFSN_CFG, 0x00002273);
run_write(sc, RT2860_WMM_CWMIN_CFG, 0x00002344);
run_write(sc, RT2860_WMM_CWMAX_CFG, 0x000034aa);
if (sc->mac_ver >= 0x3070) {
/* set delay of PA_PE assertion to 1us (unit of 0.25us) */
run_write(sc, RT2860_TX_SW_CFG0,
4 << RT2860_DLY_PAPE_EN_SHIFT);
}
/* wait while MAC is busy */
for (ntries = 0; ntries < 100; ntries++) {
if (run_read(sc, RT2860_MAC_STATUS_REG, &tmp) != 0)
goto fail;
if (!(tmp & (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY)))
break;
run_delay(sc, 10);
}
if (ntries == 100)
goto fail;
/* clear Host to MCU mailbox */
run_write(sc, RT2860_H2M_BBPAGENT, 0);
run_write(sc, RT2860_H2M_MAILBOX, 0);
run_delay(sc, 10);
if (run_bbp_init(sc) != 0) {
device_printf(sc->sc_dev, "could not initialize BBP\n");
goto fail;
}
/* abort TSF synchronization */
run_read(sc, RT2860_BCN_TIME_CFG, &tmp);
tmp &= ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
RT2860_TBTT_TIMER_EN);
run_write(sc, RT2860_BCN_TIME_CFG, tmp);
/* clear RX WCID search table */
run_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512);
/* clear WCID attribute table */
run_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 8 * 32);
/* hostapd sets a key before init. So, don't clear it. */
if (sc->cmdq_key_set != RUN_CMDQ_GO) {
/* clear shared key table */
run_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32);
/* clear shared key mode */
run_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4);
}
run_read(sc, RT2860_US_CYC_CNT, &tmp);
tmp = (tmp & ~0xff) | 0x1e;
run_write(sc, RT2860_US_CYC_CNT, tmp);
if (sc->mac_rev != 0x0101)
run_write(sc, RT2860_TXOP_CTRL_CFG, 0x0000583f);
run_write(sc, RT2860_WMM_TXOP0_CFG, 0);
run_write(sc, RT2860_WMM_TXOP1_CFG, 48 << 16 | 96);
/* write vendor-specific BBP values (from EEPROM) */
for (i = 0; i < 10; i++) {
if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff)
continue;
run_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val);
}
/* select Main antenna for 1T1R devices */
if (sc->rf_rev == RT3070_RF_3020)
run_set_rx_antenna(sc, 0);
/* send LEDs operating mode to microcontroller */
(void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]);
(void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]);
(void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]);
if (sc->mac_ver >= 0x3070)
run_rt3070_rf_init(sc);
/* disable non-existing Rx chains */
run_bbp_read(sc, 3, &bbp3);
bbp3 &= ~(1 << 3 | 1 << 4);
if (sc->nrxchains == 2)
bbp3 |= 1 << 3;
else if (sc->nrxchains == 3)
bbp3 |= 1 << 4;
run_bbp_write(sc, 3, bbp3);
/* disable non-existing Tx chains */
run_bbp_read(sc, 1, &bbp1);
if (sc->ntxchains == 1)
bbp1 &= ~(1 << 3 | 1 << 4);
run_bbp_write(sc, 1, bbp1);
if (sc->mac_ver >= 0x3070)
run_rt3070_rf_setup(sc);
/* select default channel */
run_set_chan(sc, ic->ic_curchan);
/* setup initial protection mode */
run_updateprot_cb(ic);
/* turn radio LED on */
run_set_leds(sc, RT2860_LED_RADIO);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
sc->cmdq_run = RUN_CMDQ_GO;
for (i = 0; i != RUN_N_XFER; i++)
usbd_xfer_set_stall(sc->sc_xfer[i]);
usbd_transfer_start(sc->sc_xfer[RUN_BULK_RX]);
if (run_txrx_enable(sc) != 0)
goto fail;
return;
fail:
run_stop(sc);
}
static void
run_init(void *arg)
{
struct run_softc *sc = arg;
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
RUN_LOCK(sc);
run_init_locked(sc);
RUN_UNLOCK(sc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
ieee80211_start_all(ic);
}
static void
run_stop(void *arg)
{
struct run_softc *sc = (struct run_softc *)arg;
struct ifnet *ifp = sc->sc_ifp;
uint32_t tmp;
int i;
int ntries;
RUN_LOCK_ASSERT(sc, MA_OWNED);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
run_set_leds(sc, 0); /* turn all LEDs off */
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
sc->ratectl_run = RUN_RATECTL_OFF;
sc->cmdq_run = sc->cmdq_key_set;
RUN_UNLOCK(sc);
for(i = 0; i < RUN_N_XFER; i++)
usbd_transfer_drain(sc->sc_xfer[i]);
RUN_LOCK(sc);
if (sc->rx_m != NULL) {
m_free(sc->rx_m);
sc->rx_m = NULL;
}
/* disable Tx/Rx */
run_read(sc, RT2860_MAC_SYS_CTRL, &tmp);
tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
run_write(sc, RT2860_MAC_SYS_CTRL, tmp);
/* wait for pending Tx to complete */
for (ntries = 0; ntries < 100; ntries++) {
if (run_read(sc, RT2860_TXRXQ_PCNT, &tmp) != 0) {
DPRINTF("Cannot read Tx queue count\n");
break;
}
if ((tmp & RT2860_TX2Q_PCNT_MASK) == 0) {
DPRINTF("All Tx cleared\n");
break;
}
run_delay(sc, 10);
}
if (ntries >= 100)
DPRINTF("There are still pending Tx\n");
run_delay(sc, 10);
run_write(sc, RT2860_USB_DMA_CFG, 0);
run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST);
run_write(sc, RT2860_MAC_SYS_CTRL, 0);
for (i = 0; i != RUN_EP_QUEUES; i++)
run_unsetup_tx_list(sc, &sc->sc_epq[i]);
return;
}
static void
run_delay(struct run_softc *sc, unsigned int ms)
{
usb_pause_mtx(mtx_owned(&sc->sc_mtx) ?
&sc->sc_mtx : NULL, USB_MS_TO_TICKS(ms));
}
static device_method_t run_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, run_match),
DEVMETHOD(device_attach, run_attach),
DEVMETHOD(device_detach, run_detach),
{ 0, 0 }
};
static driver_t run_driver = {
.name = "run",
.methods = run_methods,
.size = sizeof(struct run_softc)
};
static devclass_t run_devclass;
DRIVER_MODULE(run, uhub, run_driver, run_devclass, NULL, 0);
MODULE_DEPEND(run, wlan, 1, 1, 1);
MODULE_DEPEND(run, usb, 1, 1, 1);
MODULE_DEPEND(run, firmware, 1, 1, 1);
MODULE_VERSION(run, 1);