| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_1080_it/@/dev/ath/ath_hal/ar5211/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_1080_it/@/dev/ath/ath_hal/ar5211/ar5211reg.h |
/* * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * Copyright (c) 2002-2006 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD: release/9.1.0/sys/dev/ath/ath_hal/ar5211/ar5211reg.h 229733 2012-01-06 21:19:43Z dim $ */ #ifndef _DEV_ATH_AR5211REG_H #define _DEV_ATH_AR5211REG_H /* * Definitions for the Atheros AR5211/5311 chipset. */ /* * Maui2/Spirit specific registers/fields are indicated by AR5311. * Oahu specific registers/fields are indicated by AR5211. */ /* DMA Control and Interrupt Registers */ #define AR_CR 0x0008 /* control register */ #define AR_RXDP 0x000C /* receive queue descriptor pointer */ #define AR_CFG 0x0014 /* configuration and status register */ #define AR_IER 0x0024 /* Interrupt enable register */ #define AR_RTSD0 0x0028 /* RTS Duration Parameters 0 */ #define AR_RTSD1 0x002c /* RTS Duration Parameters 1 */ #define AR_TXCFG 0x0030 /* tx DMA size config register */ #define AR_RXCFG 0x0034 /* rx DMA size config register */ #define AR5211_JUMBO_LAST 0x0038 /* Jumbo descriptor last address */ #define AR_MIBC 0x0040 /* MIB control register */ #define AR_TOPS 0x0044 /* timeout prescale count */ #define AR_RXNPTO 0x0048 /* no frame received timeout */ #define AR_TXNPTO 0x004C /* no frame trasmitted timeout */ #define AR_RFGTO 0x0050 /* receive frame gap timeout */ #define AR_RFCNT 0x0054 /* receive frame count limit */ #define AR_MACMISC 0x0058 /* miscellaneous control/status */ #define AR5311_QDCLKGATE 0x005c /* QCU/DCU clock gating control */ #define AR_ISR 0x0080 /* Primary interrupt status register */ #define AR_ISR_S0 0x0084 /* Secondary interrupt status reg 0 */ #define AR_ISR_S1 0x0088 /* Secondary interrupt status reg 1 */ #define AR_ISR_S2 0x008c /* Secondary interrupt status reg 2 */ #define AR_ISR_S3 0x0090 /* Secondary interrupt status reg 3 */ #define AR_ISR_S4 0x0094 /* Secondary interrupt status reg 4 */ #define AR_IMR 0x00a0 /* Primary interrupt mask register */ #define AR_IMR_S0 0x00a4 /* Secondary interrupt mask reg 0 */ #define AR_IMR_S1 0x00a8 /* Secondary interrupt mask reg 1 */ #define AR_IMR_S2 0x00ac /* Secondary interrupt mask reg 2 */ #define AR_IMR_S3 0x00b0 /* Secondary interrupt mask reg 3 */ #define AR_IMR_S4 0x00b4 /* Secondary interrupt mask reg 4 */ #define AR_ISR_RAC 0x00c0 /* Primary interrupt status reg, */ /* Shadow copies with read-and-clear access */ #define AR_ISR_S0_S 0x00c4 /* Secondary interrupt status reg 0 */ #define AR_ISR_S1_S 0x00c8 /* Secondary interrupt status reg 1 */ #define AR_ISR_S2_S 0x00cc /* Secondary interrupt status reg 2 */ #define AR_ISR_S3_S 0x00d0 /* Secondary interrupt status reg 3 */ #define AR_ISR_S4_S 0x00d4 /* Secondary interrupt status reg 4 */ #define AR_Q0_TXDP 0x0800 /* Transmit Queue descriptor pointer */ #define AR_Q1_TXDP 0x0804 /* Transmit Queue descriptor pointer */ #define AR_Q2_TXDP 0x0808 /* Transmit Queue descriptor pointer */ #define AR_Q3_TXDP 0x080c /* Transmit Queue descriptor pointer */ #define AR_Q4_TXDP 0x0810 /* Transmit Queue descriptor pointer */ #define AR_Q5_TXDP 0x0814 /* Transmit Queue descriptor pointer */ #define AR_Q6_TXDP 0x0818 /* Transmit Queue descriptor pointer */ #define AR_Q7_TXDP 0x081c /* Transmit Queue descriptor pointer */ #define AR_Q8_TXDP 0x0820 /* Transmit Queue descriptor pointer */ #define AR_Q9_TXDP 0x0824 /* Transmit Queue descriptor pointer */ #define AR_QTXDP(i) (AR_Q0_TXDP + ((i)<<2)) #define AR_Q_TXE 0x0840 /* Transmit Queue enable */ #define AR_Q_TXD 0x0880 /* Transmit Queue disable */ #define AR_Q0_CBRCFG 0x08c0 /* CBR configuration */ #define AR_Q1_CBRCFG 0x08c4 /* CBR configuration */ #define AR_Q2_CBRCFG 0x08c8 /* CBR configuration */ #define AR_Q3_CBRCFG 0x08cc /* CBR configuration */ #define AR_Q4_CBRCFG 0x08d0 /* CBR configuration */ #define AR_Q5_CBRCFG 0x08d4 /* CBR configuration */ #define AR_Q6_CBRCFG 0x08d8 /* CBR configuration */ #define AR_Q7_CBRCFG 0x08dc /* CBR configuration */ #define AR_Q8_CBRCFG 0x08e0 /* CBR configuration */ #define AR_Q9_CBRCFG 0x08e4 /* CBR configuration */ #define AR_QCBRCFG(i) (AR_Q0_CBRCFG + ((i)<<2)) #define AR_Q0_RDYTIMECFG 0x0900 /* ReadyTime configuration */ #define AR_Q1_RDYTIMECFG 0x0904 /* ReadyTime configuration */ #define AR_Q2_RDYTIMECFG 0x0908 /* ReadyTime configuration */ #define AR_Q3_RDYTIMECFG 0x090c /* ReadyTime configuration */ #define AR_Q4_RDYTIMECFG 0x0910 /* ReadyTime configuration */ #define AR_Q5_RDYTIMECFG 0x0914 /* ReadyTime configuration */ #define AR_Q6_RDYTIMECFG 0x0918 /* ReadyTime configuration */ #define AR_Q7_RDYTIMECFG 0x091c /* ReadyTime configuration */ #define AR_Q8_RDYTIMECFG 0x0920 /* ReadyTime configuration */ #define AR_Q9_RDYTIMECFG 0x0924 /* ReadyTime configuration */ #define AR_QRDYTIMECFG(i) (AR_Q0_RDYTIMECFG + ((i)<<2)) #define AR_Q_ONESHOTARM_SC 0x0940 /* OneShotArm set control */ #define AR_Q_ONESHOTARM_CC 0x0980 /* OneShotArm clear control */ #define AR_Q0_MISC 0x09c0 /* Miscellaneous QCU settings */ #define AR_Q1_MISC 0x09c4 /* Miscellaneous QCU settings */ #define AR_Q2_MISC 0x09c8 /* Miscellaneous QCU settings */ #define AR_Q3_MISC 0x09cc /* Miscellaneous QCU settings */ #define AR_Q4_MISC 0x09d0 /* Miscellaneous QCU settings */ #define AR_Q5_MISC 0x09d4 /* Miscellaneous QCU settings */ #define AR_Q6_MISC 0x09d8 /* Miscellaneous QCU settings */ #define AR_Q7_MISC 0x09dc /* Miscellaneous QCU settings */ #define AR_Q8_MISC 0x09e0 /* Miscellaneous QCU settings */ #define AR_Q9_MISC 0x09e4 /* Miscellaneous QCU settings */ #define AR_QMISC(i) (AR_Q0_MISC + ((i)<<2)) #define AR_Q0_STS 0x0a00 /* Miscellaneous QCU status */ #define AR_Q1_STS 0x0a04 /* Miscellaneous QCU status */ #define AR_Q2_STS 0x0a08 /* Miscellaneous QCU status */ #define AR_Q3_STS 0x0a0c /* Miscellaneous QCU status */ #define AR_Q4_STS 0x0a10 /* Miscellaneous QCU status */ #define AR_Q5_STS 0x0a14 /* Miscellaneous QCU status */ #define AR_Q6_STS 0x0a18 /* Miscellaneous QCU status */ #define AR_Q7_STS 0x0a1c /* Miscellaneous QCU status */ #define AR_Q8_STS 0x0a20 /* Miscellaneous QCU status */ #define AR_Q9_STS 0x0a24 /* Miscellaneous QCU status */ #define AR_QSTS(i) (AR_Q0_STS + ((i)<<2)) #define AR_Q_RDYTIMESHDN 0x0a40 /* ReadyTimeShutdown status */ #define AR_D0_QCUMASK 0x1000 /* QCU Mask */ #define AR_D1_QCUMASK 0x1004 /* QCU Mask */ #define AR_D2_QCUMASK 0x1008 /* QCU Mask */ #define AR_D3_QCUMASK 0x100c /* QCU Mask */ #define AR_D4_QCUMASK 0x1010 /* QCU Mask */ #define AR_D5_QCUMASK 0x1014 /* QCU Mask */ #define AR_D6_QCUMASK 0x1018 /* QCU Mask */ #define AR_D7_QCUMASK 0x101c /* QCU Mask */ #define AR_D8_QCUMASK 0x1020 /* QCU Mask */ #define AR_D9_QCUMASK 0x1024 /* QCU Mask */ #define AR_DQCUMASK(i) (AR_D0_QCUMASK + ((i)<<2)) #define AR_D0_LCL_IFS 0x1040 /* DCU-specific IFS settings */ #define AR_D1_LCL_IFS 0x1044 /* DCU-specific IFS settings */ #define AR_D2_LCL_IFS 0x1048 /* DCU-specific IFS settings */ #define AR_D3_LCL_IFS 0x104c /* DCU-specific IFS settings */ #define AR_D4_LCL_IFS 0x1050 /* DCU-specific IFS settings */ #define AR_D5_LCL_IFS 0x1054 /* DCU-specific IFS settings */ #define AR_D6_LCL_IFS 0x1058 /* DCU-specific IFS settings */ #define AR_D7_LCL_IFS 0x105c /* DCU-specific IFS settings */ #define AR_D8_LCL_IFS 0x1060 /* DCU-specific IFS settings */ #define AR_D9_LCL_IFS 0x1064 /* DCU-specific IFS settings */ #define AR_DLCL_IFS(i) (AR_D0_LCL_IFS + ((i)<<2)) #define AR_D0_RETRY_LIMIT 0x1080 /* Retry limits */ #define AR_D1_RETRY_LIMIT 0x1084 /* Retry limits */ #define AR_D2_RETRY_LIMIT 0x1088 /* Retry limits */ #define AR_D3_RETRY_LIMIT 0x108c /* Retry limits */ #define AR_D4_RETRY_LIMIT 0x1090 /* Retry limits */ #define AR_D5_RETRY_LIMIT 0x1094 /* Retry limits */ #define AR_D6_RETRY_LIMIT 0x1098 /* Retry limits */ #define AR_D7_RETRY_LIMIT 0x109c /* Retry limits */ #define AR_D8_RETRY_LIMIT 0x10a0 /* Retry limits */ #define AR_D9_RETRY_LIMIT 0x10a4 /* Retry limits */ #define AR_DRETRY_LIMIT(i) (AR_D0_RETRY_LIMIT + ((i)<<2)) #define AR_D0_CHNTIME 0x10c0 /* ChannelTime settings */ #define AR_D1_CHNTIME 0x10c4 /* ChannelTime settings */ #define AR_D2_CHNTIME 0x10c8 /* ChannelTime settings */ #define AR_D3_CHNTIME 0x10cc /* ChannelTime settings */ #define AR_D4_CHNTIME 0x10d0 /* ChannelTime settings */ #define AR_D5_CHNTIME 0x10d4 /* ChannelTime settings */ #define AR_D6_CHNTIME 0x10d8 /* ChannelTime settings */ #define AR_D7_CHNTIME 0x10dc /* ChannelTime settings */ #define AR_D8_CHNTIME 0x10e0 /* ChannelTime settings */ #define AR_D9_CHNTIME 0x10e4 /* ChannelTime settings */ #define AR_DCHNTIME(i) (AR_D0_CHNTIME + ((i)<<2)) #define AR_D0_MISC 0x1100 /* Misc DCU-specific settings */ #define AR_D1_MISC 0x1104 /* Misc DCU-specific settings */ #define AR_D2_MISC 0x1108 /* Misc DCU-specific settings */ #define AR_D3_MISC 0x110c /* Misc DCU-specific settings */ #define AR_D4_MISC 0x1110 /* Misc DCU-specific settings */ #define AR_D5_MISC 0x1114 /* Misc DCU-specific settings */ #define AR_D6_MISC 0x1118 /* Misc DCU-specific settings */ #define AR_D7_MISC 0x111c /* Misc DCU-specific settings */ #define AR_D8_MISC 0x1120 /* Misc DCU-specific settings */ #define AR_D9_MISC 0x1124 /* Misc DCU-specific settings */ #define AR_DMISC(i) (AR_D0_MISC + ((i)<<2)) #define AR_D0_SEQNUM 0x1140 /* Frame seqnum control/status */ #define AR_D1_SEQNUM 0x1144 /* Frame seqnum control/status */ #define AR_D2_SEQNUM 0x1148 /* Frame seqnum control/status */ #define AR_D3_SEQNUM 0x114c /* Frame seqnum control/status */ #define AR_D4_SEQNUM 0x1150 /* Frame seqnum control/status */ #define AR_D5_SEQNUM 0x1154 /* Frame seqnum control/status */ #define AR_D6_SEQNUM 0x1158 /* Frame seqnum control/status */ #define AR_D7_SEQNUM 0x115c /* Frame seqnum control/status */ #define AR_D8_SEQNUM 0x1160 /* Frame seqnum control/status */ #define AR_D9_SEQNUM 0x1164 /* Frame seqnum control/status */ #define AR_DSEQNUM(i) (AR_D0_SEQNUM + ((i<<2))) /* MAC DCU-global IFS settings */ #define AR_D_GBL_IFS_SIFS 0x1030 /* DCU global SIFS settings */ #define AR_D_GBL_IFS_SLOT 0x1070 /* DC global slot interval */ #define AR_D_GBL_IFS_EIFS 0x10b0 /* DCU global EIFS setting */ #define AR_D_GBL_IFS_MISC 0x10f0 /* DCU global misc. IFS settings */ #define AR_D_FPCTL 0x1230 /* DCU frame prefetch settings */ #define AR_D_TXPSE 0x1270 /* DCU transmit pause control/status */ #define AR_D_TXBLK_CMD 0x1038 /* DCU transmit filter cmd (w/only) */ #define AR_D_TXBLK_DATA(i) (AR_D_TXBLK_CMD+(i)) /* DCU transmit filter data */ #define AR_D_TXBLK_CLR 0x143c /* DCU clear tx filter (w/only) */ #define AR_D_TXBLK_SET 0x147c /* DCU set tx filter (w/only) */ #define AR_D_TXPSE 0x1270 /* DCU transmit pause control/status */ #define AR_RC 0x4000 /* Warm reset control register */ #define AR_SCR 0x4004 /* Sleep control register */ #define AR_INTPEND 0x4008 /* Interrupt Pending register */ #define AR_SFR 0x400C /* Sleep force register */ #define AR_PCICFG 0x4010 /* PCI configuration register */ #define AR_GPIOCR 0x4014 /* GPIO control register */ #define AR_GPIODO 0x4018 /* GPIO data output access register */ #define AR_GPIODI 0x401C /* GPIO data input access register */ #define AR_SREV 0x4020 /* Silicon Revision register */ #define AR_EEPROM_ADDR 0x6000 /* EEPROM address register (10 bit) */ #define AR_EEPROM_DATA 0x6004 /* EEPROM data register (16 bit) */ #define AR_EEPROM_CMD 0x6008 /* EEPROM command register */ #define AR_EEPROM_STS 0x600c /* EEPROM status register */ #define AR_EEPROM_CFG 0x6010 /* EEPROM configuration register */ #define AR_STA_ID0 0x8000 /* station ID0 - low 32 bits */ #define AR_STA_ID1 0x8004 /* station ID1 - upper 16 bits */ #define AR_BSS_ID0 0x8008 /* BSSID low 32 bits */ #define AR_BSS_ID1 0x800C /* BSSID upper 16 bits / AID */ #define AR_SLOT_TIME 0x8010 /* Time-out after a collision */ #define AR_TIME_OUT 0x8014 /* ACK & CTS time-out */ #define AR_RSSI_THR 0x8018 /* RSSI warning & missed beacon threshold */ #define AR_USEC 0x801c /* transmit latency register */ #define AR_BEACON 0x8020 /* beacon control value/mode bits */ #define AR_CFP_PERIOD 0x8024 /* CFP Interval (TU/msec) */ #define AR_TIMER0 0x8028 /* Next beacon time (TU/msec) */ #define AR_TIMER1 0x802c /* DMA beacon alert time (1/8 TU) */ #define AR_TIMER2 0x8030 /* Software beacon alert (1/8 TU) */ #define AR_TIMER3 0x8034 /* ATIM window time */ #define AR_CFP_DUR 0x8038 /* maximum CFP duration in TU */ #define AR_RX_FILTER 0x803C /* receive filter register */ #define AR_MCAST_FIL0 0x8040 /* multicast filter lower 32 bits */ #define AR_MCAST_FIL1 0x8044 /* multicast filter upper 32 bits */ #define AR_DIAG_SW 0x8048 /* PCU control register */ #define AR_TSF_L32 0x804c /* local clock lower 32 bits */ #define AR_TSF_U32 0x8050 /* local clock upper 32 bits */ #define AR_TST_ADDAC 0x8054 /* ADDAC test register */ #define AR_DEF_ANTENNA 0x8058 /* default antenna register */ #define AR_LAST_TSTP 0x8080 /* Time stamp of the last beacon rcvd */ #define AR_NAV 0x8084 /* current NAV value */ #define AR_RTS_OK 0x8088 /* RTS exchange success counter */ #define AR_RTS_FAIL 0x808c /* RTS exchange failure counter */ #define AR_ACK_FAIL 0x8090 /* ACK failure counter */ #define AR_FCS_FAIL 0x8094 /* FCS check failure counter */ #define AR_BEACON_CNT 0x8098 /* Valid beacon counter */ #define AR_KEYTABLE_0 0x8800 /* Encryption key table */ #define AR_KEYTABLE(n) (AR_KEYTABLE_0 + ((n)*32)) #define AR_CR_RXE 0x00000004 /* Receive enable */ #define AR_CR_RXD 0x00000020 /* Receive disable */ #define AR_CR_SWI 0x00000040 /* One-shot software interrupt */ #define AR_CR_BITS "\20\3RXE\6RXD\7SWI" #define AR_CFG_SWTD 0x00000001 /* byteswap tx descriptor words */ #define AR_CFG_SWTB 0x00000002 /* byteswap tx data buffer words */ #define AR_CFG_SWRD 0x00000004 /* byteswap rx descriptor words */ #define AR_CFG_SWRB 0x00000008 /* byteswap rx data buffer words */ #define AR_CFG_SWRG 0x00000010 /* byteswap register access data words */ #define AR_CFG_AP_ADHOC_INDICATION 0x00000020 /* AP/adhoc indication (0-AP, 1-Adhoc) */ #define AR_CFG_PHOK 0x00000100 /* PHY OK status */ #define AR_CFG_EEBS 0x00000200 /* EEPROM busy */ #define AR_CFG_CLK_GATE_DIS 0x00000400 /* Clock gating disable (Oahu only) */ #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_M 0x00060000 /* Mask of PCI core master request queue full threshold */ #define AR_CFG_PCI_MASTER_REQ_Q_THRESH_S 17 /* Shift for PCI core master request queue full threshold */ #define AR_CFG_BITS \ "\20\1SWTD\2SWTB\3SWRD\4SWRB\5SWRG\10PHYOK11EEBS" #define AR_IER_ENABLE 0x00000001 /* Global interrupt enable */ #define AR_IER_DISABLE 0x00000000 /* Global interrupt disable */ #define AR_IER_BITS "\20\1ENABLE" #define AR_RTSD0_RTS_DURATION_6_M 0x000000FF #define AR_RTSD0_RTS_DURATION_6_S 0 #define AR_RTSD0_RTS_DURATION_9_M 0x0000FF00 #define AR_RTSD0_RTS_DURATION_9_S 8 #define AR_RTSD0_RTS_DURATION_12_M 0x00FF0000 #define AR_RTSD0_RTS_DURATION_12_S 16 #define AR_RTSD0_RTS_DURATION_18_M 0xFF000000 #define AR_RTSD0_RTS_DURATION_18_S 24 #define AR_RTSD0_RTS_DURATION_24_M 0x000000FF #define AR_RTSD0_RTS_DURATION_24_S 0 #define AR_RTSD0_RTS_DURATION_36_M 0x0000FF00 #define AR_RTSD0_RTS_DURATION_36_S 8 #define AR_RTSD0_RTS_DURATION_48_M 0x00FF0000 #define AR_RTSD0_RTS_DURATION_48_S 16 #define AR_RTSD0_RTS_DURATION_54_M 0xFF000000 #define AR_RTSD0_RTS_DURATION_54_S 24 #define AR_DMASIZE_4B 0x00000000 /* DMA size 4 bytes (TXCFG + RXCFG) */ #define AR_DMASIZE_8B 0x00000001 /* DMA size 8 bytes */ #define AR_DMASIZE_16B 0x00000002 /* DMA size 16 bytes */ #define AR_DMASIZE_32B 0x00000003 /* DMA size 32 bytes */ #define AR_DMASIZE_64B 0x00000004 /* DMA size 64 bytes */ #define AR_DMASIZE_128B 0x00000005 /* DMA size 128 bytes */ #define AR_DMASIZE_256B 0x00000006 /* DMA size 256 bytes */ #define AR_DMASIZE_512B 0x00000007 /* DMA size 512 bytes */ #define AR_TXCFG_FTRIG_M 0x000003F0 /* Mask for Frame trigger level */ #define AR_TXCFG_FTRIG_S 4 /* Shift for Frame trigger level */ #define AR_TXCFG_FTRIG_IMMED 0x00000000 /* bytes in PCU TX FIFO before air */ #define AR_TXCFG_FTRIG_64B 0x00000010 /* default */ #define AR_TXCFG_FTRIG_128B 0x00000020 #define AR_TXCFG_FTRIG_192B 0x00000030 #define AR_TXCFG_FTRIG_256B 0x00000040 /* 5 bits total */ #define AR_TXCFG_BITS "\20" #define AR5311_RXCFG_DEF_RX_ANTENNA 0x00000008 /* Default Receive Antenna */ /* Maui2/Spirit only - reserved on Oahu */ #define AR_RXCFG_ZLFDMA 0x00000010 /* Enable DMA of zero-length frame */ #define AR_RXCFG_EN_JUM 0x00000020 /* Enable jumbo rx descriptors */ #define AR_RXCFG_WR_JUM 0x00000040 /* Wrap jumbo rx descriptors */ #define AR_MIBC_COW 0x00000001 /* counter overflow warning */ #define AR_MIBC_FMC 0x00000002 /* freeze MIB counters */ #define AR_MIBC_CMC 0x00000004 /* clear MIB counters */ #define AR_MIBC_MCS 0x00000008 /* MIB counter strobe, increment all */ #define AR_TOPS_MASK 0x0000FFFF /* Mask for timeout prescale */ #define AR_RXNPTO_MASK 0x000003FF /* Mask for no frame received timeout */ #define AR_TXNPTO_MASK 0x000003FF /* Mask for no frame transmitted timeout */ #define AR_TXNPTO_QCU_MASK 0x03FFFC00 /* Mask indicating the set of QCUs */ /* for which frame completions will cause */ /* a reset of the no frame transmitted timeout */ #define AR_RPGTO_MASK 0x000003FF /* Mask for receive frame gap timeout */ #define AR_RPCNT_MASK 0x0000001F /* Mask for receive frame count limit */ #define AR_MACMISC_DMA_OBS_M 0x000001E0 /* Mask for DMA observation bus mux select */ #define AR_MACMISC_DMA_OBS_S 5 /* Shift for DMA observation bus mux select */ #define AR_MACMISC_MISC_OBS_M 0x00000E00 /* Mask for MISC observation bus mux select */ #define AR_MACMISC_MISC_OBS_S 9 /* Shift for MISC observation bus mux select */ #define AR_MACMISC_MAC_OBS_BUS_LSB_M 0x00007000 /* Mask for MAC observation bus mux select (lsb) */ #define AR_MACMISC_MAC_OBS_BUS_LSB_S 12 /* Shift for MAC observation bus mux select (lsb) */ #define AR_MACMISC_MAC_OBS_BUS_MSB_M 0x00038000 /* Mask for MAC observation bus mux select (msb) */ #define AR_MACMISC_MAC_OBS_BUS_MSB_S 15 /* Shift for MAC observation bus mux select (msb) */ /* Maui2/Spirit only. */ #define AR5311_QDCLKGATE_QCU_M 0x0000FFFF /* Mask for QCU clock disable */ #define AR5311_QDCLKGATE_DCU_M 0x07FF0000 /* Mask for DCU clock disable */ /* Interrupt Status Registers */ #define AR_ISR_RXOK 0x00000001 /* At least one frame received sans errors */ #define AR_ISR_RXDESC 0x00000002 /* Receive interrupt request */ #define AR_ISR_RXERR 0x00000004 /* Receive error interrupt */ #define AR_ISR_RXNOPKT 0x00000008 /* No frame received within timeout clock */ #define AR_ISR_RXEOL 0x00000010 /* Received descriptor empty interrupt */ #define AR_ISR_RXORN 0x00000020 /* Receive FIFO overrun interrupt */ #define AR_ISR_TXOK 0x00000040 /* Transmit okay interrupt */ #define AR_ISR_TXDESC 0x00000080 /* Transmit interrupt request */ #define AR_ISR_TXERR 0x00000100 /* Transmit error interrupt */ #define AR_ISR_TXNOPKT 0x00000200 /* No frame transmitted interrupt */ #define AR_ISR_TXEOL 0x00000400 /* Transmit descriptor empty interrupt */ #define AR_ISR_TXURN 0x00000800 /* Transmit FIFO underrun interrupt */ #define AR_ISR_MIB 0x00001000 /* MIB interrupt - see MIBC */ #define AR_ISR_SWI 0x00002000 /* Software interrupt */ #define AR_ISR_RXPHY 0x00004000 /* PHY receive error interrupt */ #define AR_ISR_RXKCM 0x00008000 /* Key-cache miss interrupt */ #define AR_ISR_SWBA 0x00010000 /* Software beacon alert interrupt */ #define AR_ISR_BRSSI 0x00020000 /* Beacon threshold interrupt */ #define AR_ISR_BMISS 0x00040000 /* Beacon missed interrupt */ #define AR_ISR_HIUERR 0x00080000 /* An unexpected bus error has occurred */ #define AR_ISR_BNR 0x00100000 /* Beacon not ready interrupt */ #define AR_ISR_TIM 0x00800000 /* TIM interrupt */ #define AR_ISR_GPIO 0x01000000 /* GPIO Interrupt */ #define AR_ISR_QCBROVF 0x02000000 /* QCU CBR overflow interrupt */ #define AR_ISR_QCBRURN 0x04000000 /* QCU CBR underrun interrupt */ #define AR_ISR_QTRIG 0x08000000 /* QCU scheduling trigger interrupt */ #define AR_ISR_RESV0 0xF0000000 /* Reserved */ #define AR_ISR_S0_QCU_TXOK_M 0x000003FF /* Mask for TXOK (QCU 0-9) */ #define AR_ISR_S0_QCU_TXDESC_M 0x03FF0000 /* Mask for TXDESC (QCU 0-9) */ #define AR_ISR_S1_QCU_TXERR_M 0x000003FF /* Mask for TXERR (QCU 0-9) */ #define AR_ISR_S1_QCU_TXEOL_M 0x03FF0000 /* Mask for TXEOL (QCU 0-9) */ #define AR_ISR_S2_QCU_TXURN_M 0x000003FF /* Mask for TXURN (QCU 0-9) */ #define AR_ISR_S2_MCABT 0x00010000 /* Master cycle abort interrupt */ #define AR_ISR_S2_SSERR 0x00020000 /* SERR interrupt */ #define AR_ISR_S2_DPERR 0x00040000 /* PCI bus parity error */ #define AR_ISR_S2_RESV0 0xFFF80000 /* Reserved */ #define AR_ISR_S3_QCU_QCBROVF_M 0x000003FF /* Mask for QCBROVF (QCU 0-9) */ #define AR_ISR_S3_QCU_QCBRURN_M 0x03FF0000 /* Mask for QCBRURN (QCU 0-9) */ #define AR_ISR_S4_QCU_QTRIG_M 0x000003FF /* Mask for QTRIG (QCU 0-9) */ #define AR_ISR_S4_RESV0 0xFFFFFC00 /* Reserved */ /* Interrupt Mask Registers */ #define AR_IMR_RXOK 0x00000001 /* At least one frame received sans errors */ #define AR_IMR_RXDESC 0x00000002 /* Receive interrupt request */ #define AR_IMR_RXERR 0x00000004 /* Receive error interrupt */ #define AR_IMR_RXNOPKT 0x00000008 /* No frame received within timeout clock */ #define AR_IMR_RXEOL 0x00000010 /* Received descriptor empty interrupt */ #define AR_IMR_RXORN 0x00000020 /* Receive FIFO overrun interrupt */ #define AR_IMR_TXOK 0x00000040 /* Transmit okay interrupt */ #define AR_IMR_TXDESC 0x00000080 /* Transmit interrupt request */ #define AR_IMR_TXERR 0x00000100 /* Transmit error interrupt */ #define AR_IMR_TXNOPKT 0x00000200 /* No frame transmitted interrupt */ #define AR_IMR_TXEOL 0x00000400 /* Transmit descriptor empty interrupt */ #define AR_IMR_TXURN 0x00000800 /* Transmit FIFO underrun interrupt */ #define AR_IMR_MIB 0x00001000 /* MIB interrupt - see MIBC */ #define AR_IMR_SWI 0x00002000 /* Software interrupt */ #define AR_IMR_RXPHY 0x00004000 /* PHY receive error interrupt */ #define AR_IMR_RXKCM 0x00008000 /* Key-cache miss interrupt */ #define AR_IMR_SWBA 0x00010000 /* Software beacon alert interrupt */ #define AR_IMR_BRSSI 0x00020000 /* Beacon threshold interrupt */ #define AR_IMR_BMISS 0x00040000 /* Beacon missed interrupt */ #define AR_IMR_HIUERR 0x00080000 /* An unexpected bus error has occurred */ #define AR_IMR_BNR 0x00100000 /* BNR interrupt */ #define AR_IMR_TIM 0x00800000 /* TIM interrupt */ #define AR_IMR_GPIO 0x01000000 /* GPIO Interrupt */ #define AR_IMR_QCBROVF 0x02000000 /* QCU CBR overflow interrupt */ #define AR_IMR_QCBRURN 0x04000000 /* QCU CBR underrun interrupt */ #define AR_IMR_QTRIG 0x08000000 /* QCU scheduling trigger interrupt */ #define AR_IMR_RESV0 0xF0000000 /* Reserved */ #define AR_IMR_S0_QCU_TXOK 0x000003FF /* Mask for TXOK (QCU 0-9) */ #define AR_IMR_S0_QCU_TXOK_S 0 #define AR_IMR_S0_QCU_TXDESC 0x03FF0000 /* Mask for TXDESC (QCU 0-9) */ #define AR_IMR_S0_QCU_TXDESC_S 16 /* Shift for TXDESC (QCU 0-9) */ #define AR_IMR_S1_QCU_TXERR 0x000003FF /* Mask for TXERR (QCU 0-9) */ #define AR_IMR_S1_QCU_TXERR_S 0 #define AR_IMR_S1_QCU_TXEOL 0x03FF0000 /* Mask for TXEOL (QCU 0-9) */ #define AR_IMR_S1_QCU_TXEOL_S 16 /* Shift for TXEOL (QCU 0-9) */ #define AR_IMR_S2_QCU_TXURN 0x000003FF /* Mask for TXURN (QCU 0-9) */ #define AR_IMR_S2_QCU_TXURN_S 0 #define AR_IMR_S2_MCABT 0x00010000 /* Master cycle abort interrupt */ #define AR_IMR_S2_SSERR 0x00020000 /* SERR interrupt */ #define AR_IMR_S2_DPERR 0x00040000 /* PCI bus parity error */ #define AR_IMR_S2_RESV0 0xFFF80000 /* Reserved */ #define AR_IMR_S3_QCU_QCBROVF_M 0x000003FF /* Mask for QCBROVF (QCU 0-9) */ #define AR_IMR_S3_QCU_QCBRURN_M 0x03FF0000 /* Mask for QCBRURN (QCU 0-9) */ #define AR_IMR_S3_QCU_QCBRURN_S 16 /* Shift for QCBRURN (QCU 0-9) */ #define AR_IMR_S4_QCU_QTRIG_M 0x000003FF /* Mask for QTRIG (QCU 0-9) */ #define AR_IMR_S4_RESV0 0xFFFFFC00 /* Reserved */ /* Interrupt status registers (read-and-clear access, secondary shadow copies) */ /* QCU registers */ #define AR_NUM_QCU 10 /* Only use QCU 0-9 for forward QCU compatibility */ #define AR_QCU_0 0x0001 #define AR_QCU_1 0x0002 #define AR_QCU_2 0x0004 #define AR_QCU_3 0x0008 #define AR_QCU_4 0x0010 #define AR_QCU_5 0x0020 #define AR_QCU_6 0x0040 #define AR_QCU_7 0x0080 #define AR_QCU_8 0x0100 #define AR_QCU_9 0x0200 #define AR_Q_TXE_M 0x000003FF /* Mask for TXE (QCU 0-9) */ #define AR_Q_TXD_M 0x000003FF /* Mask for TXD (QCU 0-9) */ #define AR_Q_CBRCFG_CBR_INTERVAL 0x00FFFFFF /* Mask for CBR interval (us) */ #define AR_Q_CBRCFG_CBR_INTERVAL_S 0 /* Shift for CBR interval */ #define AR_Q_CBRCFG_CBR_OVF_THRESH 0xFF000000 /* Mask for CBR overflow threshold */ #define AR_Q_CBRCFG_CBR_OVF_THRESH_S 24 /* Shift for " " " */ #define AR_Q_RDYTIMECFG_INT 0x00FFFFFF /* CBR interval (us) */ #define AR_Q_RDYTIMECFG_INT_S 0 /* Shift for ReadyTime Interval (us) */ #define AR_Q_RDYTIMECFG_DURATION_M 0x00FFFFFF /* Mask for CBR interval (us) */ #define AR_Q_RDYTIMECFG_EN 0x01000000 /* ReadyTime enable */ #define AR_Q_RDYTIMECFG_RESV0 0xFE000000 /* Reserved */ #define AR_Q_ONESHOTARM_SC_M 0x0000FFFF /* Mask for MAC_Q_ONESHOTARM_SC (QCU 0-15) */ #define AR_Q_ONESHOTARM_SC_RESV0 0xFFFF0000 /* Reserved */ #define AR_Q_ONESHOTARM_CC_M 0x0000FFFF /* Mask for MAC_Q_ONESHOTARM_CC (QCU 0-15) */ #define AR_Q_ONESHOTARM_CC_RESV0 0xFFFF0000 /* Reserved */ #define AR_Q_MISC_FSP_M 0x0000000F /* Mask for Frame Scheduling Policy */ #define AR_Q_MISC_FSP_ASAP 0 /* ASAP */ #define AR_Q_MISC_FSP_CBR 1 /* CBR */ #define AR_Q_MISC_FSP_DBA_GATED 2 /* DMA Beacon Alert gated */ #define AR_Q_MISC_FSP_TIM_GATED 3 /* TIM gated */ #define AR_Q_MISC_FSP_BEACON_SENT_GATED 4 /* Beacon-sent-gated */ #define AR_Q_MISC_ONE_SHOT_EN 0x00000010 /* OneShot enable */ #define AR_Q_MISC_CBR_INCR_DIS1 0x00000020 /* Disable CBR expired counter incr (empty q) */ #define AR_Q_MISC_CBR_INCR_DIS0 0x00000040 /* Disable CBR expired counter incr (empty beacon q) */ #define AR_Q_MISC_BEACON_USE 0x00000080 /* Beacon use indication */ #define AR_Q_MISC_CBR_EXP_CNTR_LIMIT 0x00000100 /* CBR expired counter limit enable */ #define AR_Q_MISC_RDYTIME_EXP_POLICY 0x00000200 /* Enable TXE cleared on ReadyTime expired or VEOL */ #define AR_Q_MISC_RESET_CBR_EXP_CTR 0x00000400 /* Reset CBR expired counter */ #define AR_Q_MISC_DCU_EARLY_TERM_REQ 0x00000800 /* DCU frame early termination request control */ #define AR_Q_MISC_RESV0 0xFFFFF000 /* Reserved */ #define AR_Q_STS_PEND_FR_CNT_M 0x00000003 /* Mask for Pending Frame Count */ #define AR_Q_STS_RESV0 0x000000FC /* Reserved */ #define AR_Q_STS_CBR_EXP_CNT_M 0x0000FF00 /* Mask for CBR expired counter */ #define AR_Q_STS_RESV1 0xFFFF0000 /* Reserved */ #define AR_Q_RDYTIMESHDN_M 0x000003FF /* Mask for ReadyTimeShutdown status (QCU 0-9) */ /* DCU registers */ #define AR_NUM_DCU 10 /* Only use 10 DCU's for forward QCU/DCU compatibility */ #define AR_DCU_0 0x0001 #define AR_DCU_1 0x0002 #define AR_DCU_2 0x0004 #define AR_DCU_3 0x0008 #define AR_DCU_4 0x0010 #define AR_DCU_5 0x0020 #define AR_DCU_6 0x0040 #define AR_DCU_7 0x0080 #define AR_DCU_8 0x0100 #define AR_DCU_9 0x0200 #define AR_D_QCUMASK_M 0x000003FF /* Mask for QCU Mask (QCU 0-9) */ #define AR_D_QCUMASK_RESV0 0xFFFFFC00 /* Reserved */ #define AR_D_LCL_IFS_CWMIN 0x000003FF /* Mask for CW_MIN */ #define AR_D_LCL_IFS_CWMIN_S 0 /* Shift for CW_MIN */ #define AR_D_LCL_IFS_CWMAX 0x000FFC00 /* Mask for CW_MAX */ #define AR_D_LCL_IFS_CWMAX_S 10 /* Shift for CW_MAX */ #define AR_D_LCL_IFS_AIFS 0x0FF00000 /* Mask for AIFS */ #define AR_D_LCL_IFS_AIFS_S 20 /* Shift for AIFS */ #define AR_D_LCL_IFS_RESV0 0xF0000000 /* Reserved */ #define AR_D_RETRY_LIMIT_FR_SH 0x0000000F /* Mask for frame short retry limit */ #define AR_D_RETRY_LIMIT_FR_SH_S 0 /* Shift for frame short retry limit */ #define AR_D_RETRY_LIMIT_FR_LG 0x000000F0 /* Mask for frame long retry limit */ #define AR_D_RETRY_LIMIT_FR_LG_S 4 /* Shift for frame long retry limit */ #define AR_D_RETRY_LIMIT_STA_SH 0x00003F00 /* Mask for station short retry limit */ #define AR_D_RETRY_LIMIT_STA_SH_S 8 /* Shift for station short retry limit */ #define AR_D_RETRY_LIMIT_STA_LG 0x000FC000 /* Mask for station short retry limit */ #define AR_D_RETRY_LIMIT_STA_LG_S 14 /* Shift for station short retry limit */ #define AR_D_RETRY_LIMIT_RESV0 0xFFF00000 /* Reserved */ #define AR_D_CHNTIME_EN 0x00100000 /* ChannelTime enable */ #define AR_D_CHNTIME_RESV0 0xFFE00000 /* Reserved */ #define AR_D_CHNTIME_DUR 0x000FFFFF /* Mask for ChannelTime duration (us) */ #define AR_D_CHNTIME_DUR_S 0 /* Shift for ChannelTime duration */ #define AR_D_MISC_BKOFF_THRESH_M 0x000007FF /* Mask for Backoff threshold setting */ #define AR_D_MISC_FRAG_BKOFF_EN 0x00000200 /* Backoff during a frag burst */ #define AR_D_MISC_HCF_POLL_EN 0x00000800 /* HFC poll enable */ #define AR_D_MISC_BKOFF_PERSISTENCE 0x00001000 /* Backoff persistence factor setting */ #define AR_D_MISC_FR_PREFETCH_EN 0x00002000 /* Frame prefetch enable */ #define AR_D_MISC_VIR_COL_HANDLING_M 0x0000C000 /* Mask for Virtual collision handling policy */ #define AR_D_MISC_VIR_COL_HANDLING_NORMAL 0 /* Normal */ #define AR_D_MISC_VIR_COL_HANDLING_MODIFIED 1 /* Modified */ #define AR_D_MISC_VIR_COL_HANDLING_IGNORE 2 /* Ignore */ #define AR_D_MISC_BEACON_USE 0x00010000 /* Beacon use indication */ #define AR_D_MISC_ARB_LOCKOUT_CNTRL 0x00060000 /* Mask for DCU arbiter lockout control */ #define AR_D_MISC_ARB_LOCKOUT_CNTRL_S 17 /* Shift for DCU arbiter lockout control */ #define AR_D_MISC_ARB_LOCKOUT_CNTRL_NONE 0 /* No lockout */ #define AR_D_MISC_ARB_LOCKOUT_CNTRL_INTRA_FR 1 /* Intra-frame */ #define AR_D_MISC_ARB_LOCKOUT_CNTRL_GLOBAL 2 /* Global */ #define AR_D_MISC_ARB_LOCKOUT_IGNORE 0x00080000 /* DCU arbiter lockout ignore control */ #define AR_D_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Sequence number increment disable */ #define AR_D_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Post-frame backoff disable */ #define AR_D_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual coll. handling policy */ #define AR_D_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS handling policy */ #define AR5311_D_MISC_SEQ_NUM_CONTROL 0x01000000 /* Sequence Number local or global */ /* Maui2/Spirit only, reserved on Oahu */ #define AR_D_MISC_RESV0 0xFE000000 /* Reserved */ #define AR_D_SEQNUM_M 0x00000FFF /* Mask for value of sequence number */ #define AR_D_SEQNUM_RESV0 0xFFFFF000 /* Reserved */ #define AR_D_GBL_IFS_MISC_LFSR_SLICE_SEL 0x00000007 /* Mask forLFSR slice select */ #define AR_D_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode indication */ #define AR_D_GBL_IFS_MISC_SIFS_DURATION_USEC 0x000003F0 /* Mask for SIFS duration (us) */ #define AR_D_GBL_IFS_MISC_USEC_DURATION 0x000FFC00 /* Mask for microsecond duration */ #define AR_D_GBL_IFS_MISC_DCU_ARBITER_DLY 0x00300000 /* Mask for DCU arbiter delay */ #define AR_D_GBL_IFS_MISC_RESV0 0xFFC00000 /* Reserved */ /* Oahu only */ #define AR_D_TXPSE_CTRL_M 0x000003FF /* Mask of DCUs to pause (DCUs 0-9) */ #define AR_D_TXPSE_RESV0 0x0000FC00 /* Reserved */ #define AR_D_TXPSE_STATUS 0x00010000 /* Transmit pause status */ #define AR_D_TXPSE_RESV1 0xFFFE0000 /* Reserved */ /* DMA & PCI Registers in PCI space (usable during sleep) */ #define AR_RC_MAC 0x00000001 /* MAC reset */ #define AR_RC_BB 0x00000002 /* Baseband reset */ #define AR_RC_RESV0 0x00000004 /* Reserved */ #define AR_RC_RESV1 0x00000008 /* Reserved */ #define AR_RC_PCI 0x00000010 /* PCI-core reset */ #define AR_RC_BITS "\20\1MAC\2BB\3RESV0\4RESV1\5RPCI" #define AR_SCR_SLDUR 0x0000ffff /* sleep duration mask, units of 128us */ #define AR_SCR_SLDUR_S 0 #define AR_SCR_SLE 0x00030000 /* sleep enable mask */ #define AR_SCR_SLE_S 16 /* sleep enable bits shift */ /* * The previous values for the following three defines were: * * AR_SCR_SLE_WAKE 0x00000000 * AR_SCR_SLE_SLP 0x00010000 * AR_SCR_SLE_NORM 0x00020000 * * However, these have been pre-shifted with AR_SCR_SLE_S. The * OS_REG_READ() macro would attempt to shift them again, effectively * shifting out any of the set bits completely. */ #define AR_SCR_SLE_WAKE 0 /* force wake */ #define AR_SCR_SLE_SLP 1 /* force sleep */ #define AR_SCR_SLE_NORM 2 /* sleep logic normal operation */ #define AR_SCR_SLE_UNITS 0x00000008 /* SCR units/TU */ #define AR_SCR_BITS "\20\20SLE_SLP\21SLE" #define AR_INTPEND_TRUE 0x00000001 /* interrupt pending */ #define AR_INTPEND_BITS "\20\1IP" #define AR_SFR_SLEEP 0x00000001 /* force sleep */ #define AR_PCICFG_CLKRUNEN 0x00000004 /* enable PCI CLKRUN function */ #define AR_PCICFG_EEPROM_SIZE_M 0x00000018 /* Mask for EEPROM size */ #define AR_PCICFG_EEPROM_SIZE_S 3 /* Mask for EEPROM size */ #define AR_PCICFG_EEPROM_SIZE_4K 0 /* EEPROM size 4 Kbit */ #define AR_PCICFG_EEPROM_SIZE_8K 1 /* EEPROM size 8 Kbit */ #define AR_PCICFG_EEPROM_SIZE_16K 2 /* EEPROM size 16 Kbit */ #define AR_PCICFG_EEPROM_SIZE_FAILED 3 /* Failure */ #define AR_PCICFG_LEDCTL 0x00000060 /* LED control Status */ #define AR_PCICFG_LEDCTL_NONE 0x00000000 /* STA is not associated or trying */ #define AR_PCICFG_LEDCTL_PEND 0x00000020 /* STA is trying to associate */ #define AR_PCICFG_LEDCTL_ASSOC 0x00000040 /* STA is associated */ #define AR_PCICFG_PCI_BUS_SEL_M 0x00000380 /* Mask for PCI observation bus mux select */ #define AR_PCICFG_DIS_CBE_FIX 0x00000400 /* Disable fix for bad PCI CBE# generation */ #define AR_PCICFG_SL_INTEN 0x00000800 /* enable interrupt line assertion when asleep */ #define AR_PCICFG_RESV0 0x00001000 /* Reserved */ #define AR_PCICFG_SL_INPEN 0x00002000 /* Force asleep when an interrupt is pending */ #define AR_PCICFG_RESV1 0x0000C000 /* Reserved */ #define AR_PCICFG_SPWR_DN 0x00010000 /* mask for sleep/awake indication */ #define AR_PCICFG_LEDMODE 0x000E0000 /* LED mode */ #define AR_PCICFG_LEDMODE_PROP 0x00000000 /* Blink prop to filtered tx/rx */ #define AR_PCICFG_LEDMODE_RPROP 0x00020000 /* Blink prop to unfiltered tx/rx */ #define AR_PCICFG_LEDMODE_SPLIT 0x00040000 /* Blink power for tx/net for rx */ #define AR_PCICFG_LEDMODE_RAND 0x00060000 /* Blink randomly */ #define AR_PCICFG_LEDBLINK 0x00700000 /* LED blink threshold select */ #define AR_PCICFG_LEDBLINK_S 20 #define AR_PCICFG_LEDSLOW 0x00800000 /* LED slowest blink rate mode */ #define AR_PCICFG_RESV2 0xFF000000 /* Reserved */ #define AR_PCICFG_BITS "\20\3CLKRUNEN\13SL_INTEN" #define AR_GPIOCR_CR_SHIFT 2 /* Each CR is 2 bits */ #define AR_GPIOCR_0_CR_N 0x00000000 /* Input only mode for GPIODO[0] */ #define AR_GPIOCR_0_CR_0 0x00000001 /* Output only if GPIODO[0] = 0 */ #define AR_GPIOCR_0_CR_1 0x00000002 /* Output only if GPIODO[0] = 1 */ #define AR_GPIOCR_0_CR_A 0x00000003 /* Always output */ #define AR_GPIOCR_1_CR_N 0x00000000 /* Input only mode for GPIODO[1] */ #define AR_GPIOCR_1_CR_0 0x00000004 /* Output only if GPIODO[1] = 0 */ #define AR_GPIOCR_1_CR_1 0x00000008 /* Output only if GPIODO[1] = 1 */ #define AR_GPIOCR_1_CR_A 0x0000000C /* Always output */ #define AR_GPIOCR_2_CR_N 0x00000000 /* Input only mode for GPIODO[2] */ #define AR_GPIOCR_2_CR_0 0x00000010 /* Output only if GPIODO[2] = 0 */ #define AR_GPIOCR_2_CR_1 0x00000020 /* Output only if GPIODO[2] = 1 */ #define AR_GPIOCR_2_CR_A 0x00000030 /* Always output */ #define AR_GPIOCR_3_CR_N 0x00000000 /* Input only mode for GPIODO[3] */ #define AR_GPIOCR_3_CR_0 0x00000040 /* Output only if GPIODO[3] = 0 */ #define AR_GPIOCR_3_CR_1 0x00000080 /* Output only if GPIODO[3] = 1 */ #define AR_GPIOCR_3_CR_A 0x000000C0 /* Always output */ #define AR_GPIOCR_4_CR_N 0x00000000 /* Input only mode for GPIODO[4] */ #define AR_GPIOCR_4_CR_0 0x00000100 /* Output only if GPIODO[4] = 0 */ #define AR_GPIOCR_4_CR_1 0x00000200 /* Output only if GPIODO[4] = 1 */ #define AR_GPIOCR_4_CR_A 0x00000300 /* Always output */ #define AR_GPIOCR_5_CR_N 0x00000000 /* Input only mode for GPIODO[5] */ #define AR_GPIOCR_5_CR_0 0x00000400 /* Output only if GPIODO[5] = 0 */ #define AR_GPIOCR_5_CR_1 0x00000800 /* Output only if GPIODO[5] = 1 */ #define AR_GPIOCR_5_CR_A 0x00000C00 /* Always output */ #define AR_GPIOCR_INT_SHIFT 12 /* Interrupt select field shifter */ #define AR_GPIOCR_INT_MASK 0x00007000 /* Interrupt select field mask */ #define AR_GPIOCR_INT_SEL0 0x00000000 /* Select Interrupt Pin GPIO_0 */ #define AR_GPIOCR_INT_SEL1 0x00001000 /* Select Interrupt Pin GPIO_1 */ #define AR_GPIOCR_INT_SEL2 0x00002000 /* Select Interrupt Pin GPIO_2 */ #define AR_GPIOCR_INT_SEL3 0x00003000 /* Select Interrupt Pin GPIO_3 */ #define AR_GPIOCR_INT_SEL4 0x00004000 /* Select Interrupt Pin GPIO_4 */ #define AR_GPIOCR_INT_SEL5 0x00005000 /* Select Interrupt Pin GPIO_5 */ #define AR_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO Interrupt */ #define AR_GPIOCR_INT_SELL 0x00000000 /* Generate Interrupt if selected pin is low */ #define AR_GPIOCR_INT_SELH 0x00010000 /* Generate Interrupt if selected pin is high */ #define AR_SREV_ID_M 0x000000FF /* Mask to read SREV info */ #define AR_PCICFG_EEPROM_SIZE_16K 2 /* EEPROM size 16 Kbit */ #define AR_SREV_ID_S 4 /* Major Rev Info */ #define AR_SREV_REVISION_M 0x0000000F /* Chip revision level */ #define AR_SREV_FPGA 1 #define AR_SREV_D2PLUS 2 #define AR_SREV_D2PLUS_MS 3 /* metal spin */ #define AR_SREV_CRETE 4 #define AR_SREV_CRETE_MS 5 /* FCS metal spin */ #define AR_SREV_CRETE_MS23 7 /* 2.3 metal spin (6 skipped) */ #define AR_SREV_CRETE_23 8 /* 2.3 full tape out */ #define AR_SREV_VERSION_M 0x000000F0 /* Chip version indication */ #define AR_SREV_VERSION_CRETE 0 #define AR_SREV_VERSION_MAUI_1 1 #define AR_SREV_VERSION_MAUI_2 2 #define AR_SREV_VERSION_SPIRIT 3 #define AR_SREV_VERSION_OAHU 4 #define AR_SREV_OAHU_ES 0 /* Engineering Sample */ #define AR_SREV_OAHU_PROD 2 /* Production */ #define RAD5_SREV_MAJOR 0x10 /* All current supported ar5211 5 GHz radios are rev 0x10 */ #define RAD5_SREV_PROD 0x15 /* Current production level radios */ #define RAD2_SREV_MAJOR 0x20 /* All current supported ar5211 2 GHz radios are rev 0x10 */ /* EEPROM Registers in the MAC */ #define AR_EEPROM_CMD_READ 0x00000001 #define AR_EEPROM_CMD_WRITE 0x00000002 #define AR_EEPROM_CMD_RESET 0x00000004 #define AR_EEPROM_STS_READ_ERROR 0x00000001 #define AR_EEPROM_STS_READ_COMPLETE 0x00000002 #define AR_EEPROM_STS_WRITE_ERROR 0x00000004 #define AR_EEPROM_STS_WRITE_COMPLETE 0x00000008 #define AR_EEPROM_CFG_SIZE_M 0x00000003 /* Mask for EEPROM size determination override */ #define AR_EEPROM_CFG_SIZE_AUTO 0 #define AR_EEPROM_CFG_SIZE_4KBIT 1 #define AR_EEPROM_CFG_SIZE_8KBIT 2 #define AR_EEPROM_CFG_SIZE_16KBIT 3 #define AR_EEPROM_CFG_DIS_WAIT_WRITE_COMPL 0x00000004 /* Disable wait for write completion */ #define AR_EEPROM_CFG_CLOCK_M 0x00000018 /* Mask for EEPROM clock rate control */ #define AR_EEPROM_CFG_CLOCK_S 3 /* Shift for EEPROM clock rate control */ #define AR_EEPROM_CFG_CLOCK_156KHZ 0 #define AR_EEPROM_CFG_CLOCK_312KHZ 1 #define AR_EEPROM_CFG_CLOCK_625KHZ 2 #define AR_EEPROM_CFG_RESV0 0x000000E0 /* Reserved */ #define AR_EEPROM_CFG_PROT_KEY_M 0x00FFFF00 /* Mask for EEPROM protection key */ #define AR_EEPROM_CFG_PROT_KEY_S 8 /* Shift for EEPROM protection key */ #define AR_EEPROM_CFG_EN_L 0x01000000 /* EPRM_EN_L setting */ /* MAC PCU Registers */ #define AR_STA_ID1_SADH_MASK 0x0000FFFF /* Mask for upper 16 bits of MAC addr */ #define AR_STA_ID1_STA_AP 0x00010000 /* Device is AP */ #define AR_STA_ID1_ADHOC 0x00020000 /* Device is ad-hoc */ #define AR_STA_ID1_PWR_SAV 0x00040000 /* Power save reporting in self-generated frames */ #define AR_STA_ID1_KSRCHDIS 0x00080000 /* Key search disable */ #define AR_STA_ID1_PCF 0x00100000 /* Observe PCF */ #define AR_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ #define AR_STA_ID1_DESC_ANTENNA 0x00400000 /* Update default antenna w/ TX antenna */ #define AR_STA_ID1_RTS_USE_DEF 0x00800000 /* Use default antenna to send RTS */ #define AR_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mb/s rate for ACK & CTS */ #define AR_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK & CTS */ #define AR_STA_ID1_BITS \ "\20\20AP\21ADHOC\22PWR_SAV\23KSRCHDIS\25PCF" #define AR_BSS_ID1_U16_M 0x0000FFFF /* Mask for upper 16 bits of BSSID */ #define AR_BSS_ID1_AID_M 0xFFFF0000 /* Mask for association ID */ #define AR_BSS_ID1_AID_S 16 /* Shift for association ID */ #define AR_SLOT_TIME_MASK 0x000007FF /* Slot time mask */ #define AR_TIME_OUT_ACK 0x00001FFF /* Mask for ACK time-out */ #define AR_TIME_OUT_ACK_S 0 /* Shift for ACK time-out */ #define AR_TIME_OUT_CTS 0x1FFF0000 /* Mask for CTS time-out */ #define AR_TIME_OUT_CTS_S 16 /* Shift for CTS time-out */ #define AR_RSSI_THR_MASK 0x000000FF /* Mask for Beacon RSSI warning threshold */ #define AR_RSSI_THR_BM_THR 0x0000FF00 /* Mask for Missed beacon threshold */ #define AR_RSSI_THR_BM_THR_S 8 /* Shift for Missed beacon threshold */ #define AR_USEC_M 0x0000007F /* Mask for clock cycles in 1 usec */ #define AR_USEC_32_M 0x00003F80 /* Mask for number of 32MHz clock cycles in 1 usec */ #define AR_USEC_32_S 7 /* Shift for number of 32MHz clock cycles in 1 usec */ /* * Tx/Rx latencies are to signal start and are in usecs. * * NOTE: AR5211/AR5311 difference: on Oahu, the TX latency field * has increased from 6 bits to 9 bits. The RX latency field * is unchanged, but is shifted over 3 bits. */ #define AR5311_USEC_TX_LAT_M 0x000FC000 /* Tx latency */ #define AR5311_USEC_TX_LAT_S 14 #define AR5311_USEC_RX_LAT_M 0x03F00000 /* Rx latency */ #define AR5311_USEC_RX_LAT_S 20 #define AR5211_USEC_TX_LAT_M 0x007FC000 /* Tx latency */ #define AR5211_USEC_TX_LAT_S 14 #define AR5211_USEC_RX_LAT_M 0x1F800000 /* Rx latency */ #define AR5211_USEC_RX_LAT_S 23 #define AR_BEACON_PERIOD 0x0000FFFF /* Beacon period in TU/msec */ #define AR_BEACON_PERIOD_S 0 /* Byte offset of PERIOD start*/ #define AR_BEACON_TIM 0x007F0000 /* Byte offset of TIM start */ #define AR_BEACON_TIM_S 16 /* Byte offset of TIM start */ #define AR_BEACON_EN 0x00800000 /* beacon enable */ #define AR_BEACON_RESET_TSF 0x01000000 /* Clears TSF to 0 */ #define AR_BEACON_BITS "\20\27ENABLE\30RESET_TSF" #define AR_RX_FILTER_ALL 0x00000000 /* Disallow all frames */ #define AR_RX_UCAST 0x00000001 /* Allow unicast frames */ #define AR_RX_MCAST 0x00000002 /* Allow multicast frames */ #define AR_RX_BCAST 0x00000004 /* Allow broadcast frames */ #define AR_RX_CONTROL 0x00000008 /* Allow control frames */ #define AR_RX_BEACON 0x00000010 /* Allow beacon frames */ #define AR_RX_PROM 0x00000020 /* Promiscuous mode */ #define AR_RX_PHY_ERR 0x00000040 /* Allow all phy errors */ #define AR_RX_PHY_RADAR 0x00000080 /* Allow radar phy errors */ #define AR_RX_FILTER_BITS \ "\20\1UCAST\2MCAST\3BCAST\4CONTROL\5BEACON\6PROMISC\7PHY_ERR\10PHY_RADAR" #define AR_DIAG_SW_CACHE_ACK 0x00000001 /* disable ACK if no valid key*/ #define AR_DIAG_SW_DIS_ACK 0x00000002 /* disable ACK generation */ #define AR_DIAG_SW_DIS_CTS 0x00000004 /* disable CTS generation */ #define AR_DIAG_SW_DIS_ENCRYPT 0x00000008 /* disable encryption */ #define AR_DIAG_SW_DIS_DECRYPT 0x00000010 /* disable decryption */ #define AR_DIAG_SW_DIS_RX 0x00000020 /* disable receive */ #define AR_DIAG_SW_CORR_FCS 0x00000080 /* corrupt FCS */ #define AR_DIAG_SW_CHAN_INFO 0x00000100 /* dump channel info */ #define AR_DIAG_SW_EN_SCRAMSD 0x00000200 /* enable fixed scrambler seed*/ #define AR5311_DIAG_SW_USE_ECO 0x00000400 /* "super secret" use ECO enable bit */ #define AR_DIAG_SW_SCRAM_SEED_M 0x0001FC00 /* Fixed scrambler seed mask */ #define AR_DIAG_SW_SCRAM_SEED_S 10 /* Fixed scrambler seed shfit */ #define AR_DIAG_SW_FRAME_NV0 0x00020000 /* accept frames of non-zero protocol version */ #define AR_DIAG_SW_OBS_PT_SEL_M 0x000C0000 /* Observation point select */ #define AR_DIAG_SW_OBS_PT_SEL_S 18 /* Observation point select */ #define AR_DIAG_SW_BITS \ "\20\1DIS_CACHE_ACK\2DIS_ACK\3DIS_CTS\4DIS_ENC\5DIS_DEC\6DIS_RX"\ "\11CORR_FCS\12CHAN_INFO\13EN_SCRAM_SEED\14USE_ECO\24FRAME_NV0" #define AR_KEYTABLE_KEY0(n) (AR_KEYTABLE(n) + 0) /* key bit 0-31 */ #define AR_KEYTABLE_KEY1(n) (AR_KEYTABLE(n) + 4) /* key bit 32-47 */ #define AR_KEYTABLE_KEY2(n) (AR_KEYTABLE(n) + 8) /* key bit 48-79 */ #define AR_KEYTABLE_KEY3(n) (AR_KEYTABLE(n) + 12) /* key bit 80-95 */ #define AR_KEYTABLE_KEY4(n) (AR_KEYTABLE(n) + 16) /* key bit 96-127 */ #define AR_KEYTABLE_TYPE(n) (AR_KEYTABLE(n) + 20) /* key type */ #define AR_KEYTABLE_TYPE_40 0x00000000 /* WEP 40 bit key */ #define AR_KEYTABLE_TYPE_104 0x00000001 /* WEP 104 bit key */ #define AR_KEYTABLE_TYPE_128 0x00000003 /* WEP 128 bit key */ #define AR_KEYTABLE_TYPE_AES 0x00000005 /* AES 128 bit key */ #define AR_KEYTABLE_TYPE_CLR 0x00000007 /* no encryption */ #define AR_KEYTABLE_MAC0(n) (AR_KEYTABLE(n) + 24) /* MAC address 1-32 */ #define AR_KEYTABLE_MAC1(n) (AR_KEYTABLE(n) + 28) /* MAC address 33-47 */ #define AR_KEYTABLE_VALID 0x00008000 /* key and MAC address valid */ #endif /* _DEV_ATH_AR5211REG_H */