| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/iwnfw/iwn6000/@/dev/usb/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/iwnfw/iwn6000/@/dev/usb/usb_transfer.c |
/* $FreeBSD: release/9.1.0/sys/dev/usb/usb_transfer.c 236477 2012-06-02 19:10:00Z marius $ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#define USB_DEBUG_VAR usb_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/usb_pf.h>
struct usb_std_packet_size {
struct {
uint16_t min; /* inclusive */
uint16_t max; /* inclusive */
} range;
uint16_t fixed[4];
};
static usb_callback_t usb_request_callback;
static const struct usb_config usb_control_ep_cfg[USB_CTRL_XFER_MAX] = {
/* This transfer is used for generic control endpoint transfers */
[0] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control endpoint */
.direction = UE_DIR_ANY,
.bufsize = USB_EP0_BUFSIZE, /* bytes */
.flags = {.proxy_buffer = 1,},
.callback = &usb_request_callback,
.usb_mode = USB_MODE_DUAL, /* both modes */
},
/* This transfer is used for generic clear stall only */
[1] = {
.type = UE_CONTROL,
.endpoint = 0x00, /* Control pipe */
.direction = UE_DIR_ANY,
.bufsize = sizeof(struct usb_device_request),
.callback = &usb_do_clear_stall_callback,
.timeout = 1000, /* 1 second */
.interval = 50, /* 50ms */
.usb_mode = USB_MODE_HOST,
},
};
/* function prototypes */
static void usbd_update_max_frame_size(struct usb_xfer *);
static void usbd_transfer_unsetup_sub(struct usb_xfer_root *, uint8_t);
static void usbd_control_transfer_init(struct usb_xfer *);
static int usbd_setup_ctrl_transfer(struct usb_xfer *);
static void usb_callback_proc(struct usb_proc_msg *);
static void usbd_callback_ss_done_defer(struct usb_xfer *);
static void usbd_callback_wrapper(struct usb_xfer_queue *);
static void usbd_transfer_start_cb(void *);
static uint8_t usbd_callback_wrapper_sub(struct usb_xfer *);
static void usbd_get_std_packet_size(struct usb_std_packet_size *ptr,
uint8_t type, enum usb_dev_speed speed);
/*------------------------------------------------------------------------*
* usb_request_callback
*------------------------------------------------------------------------*/
static void
usb_request_callback(struct usb_xfer *xfer, usb_error_t error)
{
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE)
usb_handle_request_callback(xfer, error);
else
usbd_do_request_callback(xfer, error);
}
/*------------------------------------------------------------------------*
* usbd_update_max_frame_size
*
* This function updates the maximum frame size, hence high speed USB
* can transfer multiple consecutive packets.
*------------------------------------------------------------------------*/
static void
usbd_update_max_frame_size(struct usb_xfer *xfer)
{
/* compute maximum frame size */
/* this computation should not overflow 16-bit */
/* max = 15 * 1024 */
xfer->max_frame_size = xfer->max_packet_size * xfer->max_packet_count;
}
/*------------------------------------------------------------------------*
* usbd_get_dma_delay
*
* The following function is called when we need to
* synchronize with DMA hardware.
*
* Returns:
* 0: no DMA delay required
* Else: milliseconds of DMA delay
*------------------------------------------------------------------------*/
usb_timeout_t
usbd_get_dma_delay(struct usb_device *udev)
{
struct usb_bus_methods *mtod;
uint32_t temp;
mtod = udev->bus->methods;
temp = 0;
if (mtod->get_dma_delay) {
(mtod->get_dma_delay) (udev, &temp);
/*
* Round up and convert to milliseconds. Note that we use
* 1024 milliseconds per second. to save a division.
*/
temp += 0x3FF;
temp /= 0x400;
}
return (temp);
}
/*------------------------------------------------------------------------*
* usbd_transfer_setup_sub_malloc
*
* This function will allocate one or more DMA'able memory chunks
* according to "size", "align" and "count" arguments. "ppc" is
* pointed to a linear array of USB page caches afterwards.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
#if USB_HAVE_BUSDMA
uint8_t
usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm,
struct usb_page_cache **ppc, usb_size_t size, usb_size_t align,
usb_size_t count)
{
struct usb_page_cache *pc;
struct usb_page *pg;
void *buf;
usb_size_t n_dma_pc;
usb_size_t n_obj;
usb_size_t x;
usb_size_t y;
usb_size_t r;
usb_size_t z;
USB_ASSERT(align > 1, ("Invalid alignment, 0x%08x\n",
align));
USB_ASSERT(size > 0, ("Invalid size = 0\n"));
if (count == 0) {
return (0); /* nothing to allocate */
}
/*
* Make sure that the size is aligned properly.
*/
size = -((-size) & (-align));
/*
* Try multi-allocation chunks to reduce the number of DMA
* allocations, hence DMA allocations are slow.
*/
if (size >= USB_PAGE_SIZE) {
n_dma_pc = count;
n_obj = 1;
} else {
/* compute number of objects per page */
n_obj = (USB_PAGE_SIZE / size);
/*
* Compute number of DMA chunks, rounded up
* to nearest one:
*/
n_dma_pc = ((count + n_obj - 1) / n_obj);
}
if (parm->buf == NULL) {
/* for the future */
parm->dma_page_ptr += n_dma_pc;
parm->dma_page_cache_ptr += n_dma_pc;
parm->dma_page_ptr += count;
parm->xfer_page_cache_ptr += count;
return (0);
}
for (x = 0; x != n_dma_pc; x++) {
/* need to initialize the page cache */
parm->dma_page_cache_ptr[x].tag_parent =
&parm->curr_xfer->xroot->dma_parent_tag;
}
for (x = 0; x != count; x++) {
/* need to initialize the page cache */
parm->xfer_page_cache_ptr[x].tag_parent =
&parm->curr_xfer->xroot->dma_parent_tag;
}
if (ppc) {
*ppc = parm->xfer_page_cache_ptr;
}
r = count; /* set remainder count */
z = n_obj * size; /* set allocation size */
pc = parm->xfer_page_cache_ptr;
pg = parm->dma_page_ptr;
for (x = 0; x != n_dma_pc; x++) {
if (r < n_obj) {
/* compute last remainder */
z = r * size;
n_obj = r;
}
if (usb_pc_alloc_mem(parm->dma_page_cache_ptr,
pg, z, align)) {
return (1); /* failure */
}
/* Set beginning of current buffer */
buf = parm->dma_page_cache_ptr->buffer;
/* Make room for one DMA page cache and one page */
parm->dma_page_cache_ptr++;
pg++;
for (y = 0; (y != n_obj); y++, r--, pc++, pg++) {
/* Load sub-chunk into DMA */
if (usb_pc_dmamap_create(pc, size)) {
return (1); /* failure */
}
pc->buffer = USB_ADD_BYTES(buf, y * size);
pc->page_start = pg;
mtx_lock(pc->tag_parent->mtx);
if (usb_pc_load_mem(pc, size, 1 /* synchronous */ )) {
mtx_unlock(pc->tag_parent->mtx);
return (1); /* failure */
}
mtx_unlock(pc->tag_parent->mtx);
}
}
parm->xfer_page_cache_ptr = pc;
parm->dma_page_ptr = pg;
return (0);
}
#endif
/*------------------------------------------------------------------------*
* usbd_transfer_setup_sub - transfer setup subroutine
*
* This function must be called from the "xfer_setup" callback of the
* USB Host or Device controller driver when setting up an USB
* transfer. This function will setup correct packet sizes, buffer
* sizes, flags and more, that are stored in the "usb_xfer"
* structure.
*------------------------------------------------------------------------*/
void
usbd_transfer_setup_sub(struct usb_setup_params *parm)
{
enum {
REQ_SIZE = 8,
MIN_PKT = 8,
};
struct usb_xfer *xfer = parm->curr_xfer;
const struct usb_config *setup = parm->curr_setup;
struct usb_endpoint_ss_comp_descriptor *ecomp;
struct usb_endpoint_descriptor *edesc;
struct usb_std_packet_size std_size;
usb_frcount_t n_frlengths;
usb_frcount_t n_frbuffers;
usb_frcount_t x;
uint8_t type;
uint8_t zmps;
/*
* Sanity check. The following parameters must be initialized before
* calling this function.
*/
if ((parm->hc_max_packet_size == 0) ||
(parm->hc_max_packet_count == 0) ||
(parm->hc_max_frame_size == 0)) {
parm->err = USB_ERR_INVAL;
goto done;
}
edesc = xfer->endpoint->edesc;
ecomp = xfer->endpoint->ecomp;
type = (edesc->bmAttributes & UE_XFERTYPE);
xfer->flags = setup->flags;
xfer->nframes = setup->frames;
xfer->timeout = setup->timeout;
xfer->callback = setup->callback;
xfer->interval = setup->interval;
xfer->endpointno = edesc->bEndpointAddress;
xfer->max_packet_size = UGETW(edesc->wMaxPacketSize);
xfer->max_packet_count = 1;
/* make a shadow copy: */
xfer->flags_int.usb_mode = parm->udev->flags.usb_mode;
parm->bufsize = setup->bufsize;
switch (parm->speed) {
case USB_SPEED_HIGH:
switch (type) {
case UE_ISOCHRONOUS:
case UE_INTERRUPT:
xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3;
/* check for invalid max packet count */
if (xfer->max_packet_count > 3)
xfer->max_packet_count = 3;
break;
default:
break;
}
xfer->max_packet_size &= 0x7FF;
break;
case USB_SPEED_SUPER:
xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3;
if (ecomp != NULL)
xfer->max_packet_count += ecomp->bMaxBurst;
if ((xfer->max_packet_count == 0) ||
(xfer->max_packet_count > 16))
xfer->max_packet_count = 16;
switch (type) {
case UE_CONTROL:
xfer->max_packet_count = 1;
break;
case UE_ISOCHRONOUS:
if (ecomp != NULL) {
uint8_t mult;
mult = (ecomp->bmAttributes & 3) + 1;
if (mult > 3)
mult = 3;
xfer->max_packet_count *= mult;
}
break;
default:
break;
}
xfer->max_packet_size &= 0x7FF;
break;
default:
break;
}
/* range check "max_packet_count" */
if (xfer->max_packet_count > parm->hc_max_packet_count) {
xfer->max_packet_count = parm->hc_max_packet_count;
}
/* filter "wMaxPacketSize" according to HC capabilities */
if ((xfer->max_packet_size > parm->hc_max_packet_size) ||
(xfer->max_packet_size == 0)) {
xfer->max_packet_size = parm->hc_max_packet_size;
}
/* filter "wMaxPacketSize" according to standard sizes */
usbd_get_std_packet_size(&std_size, type, parm->speed);
if (std_size.range.min || std_size.range.max) {
if (xfer->max_packet_size < std_size.range.min) {
xfer->max_packet_size = std_size.range.min;
}
if (xfer->max_packet_size > std_size.range.max) {
xfer->max_packet_size = std_size.range.max;
}
} else {
if (xfer->max_packet_size >= std_size.fixed[3]) {
xfer->max_packet_size = std_size.fixed[3];
} else if (xfer->max_packet_size >= std_size.fixed[2]) {
xfer->max_packet_size = std_size.fixed[2];
} else if (xfer->max_packet_size >= std_size.fixed[1]) {
xfer->max_packet_size = std_size.fixed[1];
} else {
/* only one possibility left */
xfer->max_packet_size = std_size.fixed[0];
}
}
/* compute "max_frame_size" */
usbd_update_max_frame_size(xfer);
/* check interrupt interval and transfer pre-delay */
if (type == UE_ISOCHRONOUS) {
uint16_t frame_limit;
xfer->interval = 0; /* not used, must be zero */
xfer->flags_int.isochronous_xfr = 1; /* set flag */
if (xfer->timeout == 0) {
/*
* set a default timeout in
* case something goes wrong!
*/
xfer->timeout = 1000 / 4;
}
switch (parm->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
frame_limit = USB_MAX_FS_ISOC_FRAMES_PER_XFER;
xfer->fps_shift = 0;
break;
default:
frame_limit = USB_MAX_HS_ISOC_FRAMES_PER_XFER;
xfer->fps_shift = edesc->bInterval;
if (xfer->fps_shift > 0)
xfer->fps_shift--;
if (xfer->fps_shift > 3)
xfer->fps_shift = 3;
if (xfer->flags.pre_scale_frames != 0)
xfer->nframes <<= (3 - xfer->fps_shift);
break;
}
if (xfer->nframes > frame_limit) {
/*
* this is not going to work
* cross hardware
*/
parm->err = USB_ERR_INVAL;
goto done;
}
if (xfer->nframes == 0) {
/*
* this is not a valid value
*/
parm->err = USB_ERR_ZERO_NFRAMES;
goto done;
}
} else {
/*
* If a value is specified use that else check the
* endpoint descriptor!
*/
if (type == UE_INTERRUPT) {
uint32_t temp;
if (xfer->interval == 0) {
xfer->interval = edesc->bInterval;
switch (parm->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
break;
default:
/* 125us -> 1ms */
if (xfer->interval < 4)
xfer->interval = 1;
else if (xfer->interval > 16)
xfer->interval = (1 << (16 - 4));
else
xfer->interval =
(1 << (xfer->interval - 4));
break;
}
}
if (xfer->interval == 0) {
/*
* One millisecond is the smallest
* interval we support:
*/
xfer->interval = 1;
}
xfer->fps_shift = 0;
temp = 1;
while ((temp != 0) && (temp < xfer->interval)) {
xfer->fps_shift++;
temp *= 2;
}
switch (parm->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
break;
default:
xfer->fps_shift += 3;
break;
}
}
}
/*
* NOTE: we do not allow "max_packet_size" or "max_frame_size"
* to be equal to zero when setting up USB transfers, hence
* this leads to alot of extra code in the USB kernel.
*/
if ((xfer->max_frame_size == 0) ||
(xfer->max_packet_size == 0)) {
zmps = 1;
if ((parm->bufsize <= MIN_PKT) &&
(type != UE_CONTROL) &&
(type != UE_BULK)) {
/* workaround */
xfer->max_packet_size = MIN_PKT;
xfer->max_packet_count = 1;
parm->bufsize = 0; /* automatic setup length */
usbd_update_max_frame_size(xfer);
} else {
parm->err = USB_ERR_ZERO_MAXP;
goto done;
}
} else {
zmps = 0;
}
/*
* check if we should setup a default
* length:
*/
if (parm->bufsize == 0) {
parm->bufsize = xfer->max_frame_size;
if (type == UE_ISOCHRONOUS) {
parm->bufsize *= xfer->nframes;
}
}
/*
* check if we are about to setup a proxy
* type of buffer:
*/
if (xfer->flags.proxy_buffer) {
/* round bufsize up */
parm->bufsize += (xfer->max_frame_size - 1);
if (parm->bufsize < xfer->max_frame_size) {
/* length wrapped around */
parm->err = USB_ERR_INVAL;
goto done;
}
/* subtract remainder */
parm->bufsize -= (parm->bufsize % xfer->max_frame_size);
/* add length of USB device request structure, if any */
if (type == UE_CONTROL) {
parm->bufsize += REQ_SIZE; /* SETUP message */
}
}
xfer->max_data_length = parm->bufsize;
/* Setup "n_frlengths" and "n_frbuffers" */
if (type == UE_ISOCHRONOUS) {
n_frlengths = xfer->nframes;
n_frbuffers = 1;
} else {
if (type == UE_CONTROL) {
xfer->flags_int.control_xfr = 1;
if (xfer->nframes == 0) {
if (parm->bufsize <= REQ_SIZE) {
/*
* there will never be any data
* stage
*/
xfer->nframes = 1;
} else {
xfer->nframes = 2;
}
}
} else {
if (xfer->nframes == 0) {
xfer->nframes = 1;
}
}
n_frlengths = xfer->nframes;
n_frbuffers = xfer->nframes;
}
/*
* check if we have room for the
* USB device request structure:
*/
if (type == UE_CONTROL) {
if (xfer->max_data_length < REQ_SIZE) {
/* length wrapped around or too small bufsize */
parm->err = USB_ERR_INVAL;
goto done;
}
xfer->max_data_length -= REQ_SIZE;
}
/*
* Setup "frlengths" and shadow "frlengths" for keeping the
* initial frame lengths when a USB transfer is complete. This
* information is useful when computing isochronous offsets.
*/
xfer->frlengths = parm->xfer_length_ptr;
parm->xfer_length_ptr += 2 * n_frlengths;
/* setup "frbuffers" */
xfer->frbuffers = parm->xfer_page_cache_ptr;
parm->xfer_page_cache_ptr += n_frbuffers;
/* initialize max frame count */
xfer->max_frame_count = xfer->nframes;
/*
* check if we need to setup
* a local buffer:
*/
if (!xfer->flags.ext_buffer) {
/* align data */
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
if (parm->buf) {
xfer->local_buffer =
USB_ADD_BYTES(parm->buf, parm->size[0]);
usbd_xfer_set_frame_offset(xfer, 0, 0);
if ((type == UE_CONTROL) && (n_frbuffers > 1)) {
usbd_xfer_set_frame_offset(xfer, REQ_SIZE, 1);
}
}
parm->size[0] += parm->bufsize;
/* align data again */
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
}
/*
* Compute maximum buffer size
*/
if (parm->bufsize_max < parm->bufsize) {
parm->bufsize_max = parm->bufsize;
}
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable) {
/*
* Setup "dma_page_ptr".
*
* Proof for formula below:
*
* Assume there are three USB frames having length "a", "b" and
* "c". These USB frames will at maximum need "z"
* "usb_page" structures. "z" is given by:
*
* z = ((a / USB_PAGE_SIZE) + 2) + ((b / USB_PAGE_SIZE) + 2) +
* ((c / USB_PAGE_SIZE) + 2);
*
* Constraining "a", "b" and "c" like this:
*
* (a + b + c) <= parm->bufsize
*
* We know that:
*
* z <= ((parm->bufsize / USB_PAGE_SIZE) + (3*2));
*
* Here is the general formula:
*/
xfer->dma_page_ptr = parm->dma_page_ptr;
parm->dma_page_ptr += (2 * n_frbuffers);
parm->dma_page_ptr += (parm->bufsize / USB_PAGE_SIZE);
}
#endif
if (zmps) {
/* correct maximum data length */
xfer->max_data_length = 0;
}
/* subtract USB frame remainder from "hc_max_frame_size" */
xfer->max_hc_frame_size =
(parm->hc_max_frame_size -
(parm->hc_max_frame_size % xfer->max_frame_size));
if (xfer->max_hc_frame_size == 0) {
parm->err = USB_ERR_INVAL;
goto done;
}
/* initialize frame buffers */
if (parm->buf) {
for (x = 0; x != n_frbuffers; x++) {
xfer->frbuffers[x].tag_parent =
&xfer->xroot->dma_parent_tag;
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable &&
(parm->bufsize_max > 0)) {
if (usb_pc_dmamap_create(
xfer->frbuffers + x,
parm->bufsize_max)) {
parm->err = USB_ERR_NOMEM;
goto done;
}
}
#endif
}
}
done:
if (parm->err) {
/*
* Set some dummy values so that we avoid division by zero:
*/
xfer->max_hc_frame_size = 1;
xfer->max_frame_size = 1;
xfer->max_packet_size = 1;
xfer->max_data_length = 0;
xfer->nframes = 0;
xfer->max_frame_count = 0;
}
}
/*------------------------------------------------------------------------*
* usbd_transfer_setup - setup an array of USB transfers
*
* NOTE: You must always call "usbd_transfer_unsetup" after calling
* "usbd_transfer_setup" if success was returned.
*
* The idea is that the USB device driver should pre-allocate all its
* transfers by one call to this function.
*
* Return values:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usbd_transfer_setup(struct usb_device *udev,
const uint8_t *ifaces, struct usb_xfer **ppxfer,
const struct usb_config *setup_start, uint16_t n_setup,
void *priv_sc, struct mtx *xfer_mtx)
{
struct usb_xfer dummy;
struct usb_setup_params parm;
const struct usb_config *setup_end = setup_start + n_setup;
const struct usb_config *setup;
struct usb_endpoint *ep;
struct usb_xfer_root *info;
struct usb_xfer *xfer;
void *buf = NULL;
uint16_t n;
uint16_t refcount;
parm.err = 0;
refcount = 0;
info = NULL;
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usbd_transfer_setup can sleep!");
/* do some checking first */
if (n_setup == 0) {
DPRINTFN(6, "setup array has zero length!\n");
return (USB_ERR_INVAL);
}
if (ifaces == 0) {
DPRINTFN(6, "ifaces array is NULL!\n");
return (USB_ERR_INVAL);
}
if (xfer_mtx == NULL) {
DPRINTFN(6, "using global lock\n");
xfer_mtx = &Giant;
}
/* sanity checks */
for (setup = setup_start, n = 0;
setup != setup_end; setup++, n++) {
if (setup->bufsize == (usb_frlength_t)-1) {
parm.err = USB_ERR_BAD_BUFSIZE;
DPRINTF("invalid bufsize\n");
}
if (setup->callback == NULL) {
parm.err = USB_ERR_NO_CALLBACK;
DPRINTF("no callback\n");
}
ppxfer[n] = NULL;
}
if (parm.err) {
goto done;
}
memset(&parm, 0, sizeof(parm));
parm.udev = udev;
parm.speed = usbd_get_speed(udev);
parm.hc_max_packet_count = 1;
if (parm.speed >= USB_SPEED_MAX) {
parm.err = USB_ERR_INVAL;
goto done;
}
/* setup all transfers */
while (1) {
if (buf) {
/*
* Initialize the "usb_xfer_root" structure,
* which is common for all our USB transfers.
*/
info = USB_ADD_BYTES(buf, 0);
info->memory_base = buf;
info->memory_size = parm.size[0];
#if USB_HAVE_BUSDMA
info->dma_page_cache_start = USB_ADD_BYTES(buf, parm.size[4]);
info->dma_page_cache_end = USB_ADD_BYTES(buf, parm.size[5]);
#endif
info->xfer_page_cache_start = USB_ADD_BYTES(buf, parm.size[5]);
info->xfer_page_cache_end = USB_ADD_BYTES(buf, parm.size[2]);
cv_init(&info->cv_drain, "WDRAIN");
info->xfer_mtx = xfer_mtx;
#if USB_HAVE_BUSDMA
usb_dma_tag_setup(&info->dma_parent_tag,
parm.dma_tag_p, udev->bus->dma_parent_tag[0].tag,
xfer_mtx, &usb_bdma_done_event, 32, parm.dma_tag_max);
#endif
info->bus = udev->bus;
info->udev = udev;
TAILQ_INIT(&info->done_q.head);
info->done_q.command = &usbd_callback_wrapper;
#if USB_HAVE_BUSDMA
TAILQ_INIT(&info->dma_q.head);
info->dma_q.command = &usb_bdma_work_loop;
#endif
info->done_m[0].hdr.pm_callback = &usb_callback_proc;
info->done_m[0].xroot = info;
info->done_m[1].hdr.pm_callback = &usb_callback_proc;
info->done_m[1].xroot = info;
/*
* In device side mode control endpoint
* requests need to run from a separate
* context, else there is a chance of
* deadlock!
*/
if (setup_start == usb_control_ep_cfg)
info->done_p =
&udev->bus->control_xfer_proc;
else if (xfer_mtx == &Giant)
info->done_p =
&udev->bus->giant_callback_proc;
else
info->done_p =
&udev->bus->non_giant_callback_proc;
}
/* reset sizes */
parm.size[0] = 0;
parm.buf = buf;
parm.size[0] += sizeof(info[0]);
for (setup = setup_start, n = 0;
setup != setup_end; setup++, n++) {
/* skip USB transfers without callbacks: */
if (setup->callback == NULL) {
continue;
}
/* see if there is a matching endpoint */
ep = usbd_get_endpoint(udev,
ifaces[setup->if_index], setup);
if ((ep == NULL) || (ep->methods == NULL)) {
if (setup->flags.no_pipe_ok)
continue;
if ((setup->usb_mode != USB_MODE_DUAL) &&
(setup->usb_mode != udev->flags.usb_mode))
continue;
parm.err = USB_ERR_NO_PIPE;
goto done;
}
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store current setup pointer */
parm.curr_setup = setup;
if (buf) {
/*
* Common initialization of the
* "usb_xfer" structure.
*/
xfer = USB_ADD_BYTES(buf, parm.size[0]);
xfer->address = udev->address;
xfer->priv_sc = priv_sc;
xfer->xroot = info;
usb_callout_init_mtx(&xfer->timeout_handle,
&udev->bus->bus_mtx, 0);
} else {
/*
* Setup a dummy xfer, hence we are
* writing to the "usb_xfer"
* structure pointed to by "xfer"
* before we have allocated any
* memory:
*/
xfer = &dummy;
memset(&dummy, 0, sizeof(dummy));
refcount++;
}
/* set transfer endpoint pointer */
xfer->endpoint = ep;
parm.size[0] += sizeof(xfer[0]);
parm.methods = xfer->endpoint->methods;
parm.curr_xfer = xfer;
/*
* Call the Host or Device controller transfer
* setup routine:
*/
(udev->bus->methods->xfer_setup) (&parm);
/* check for error */
if (parm.err)
goto done;
if (buf) {
/*
* Increment the endpoint refcount. This
* basically prevents setting a new
* configuration and alternate setting
* when USB transfers are in use on
* the given interface. Search the USB
* code for "endpoint->refcount_alloc" if you
* want more information.
*/
USB_BUS_LOCK(info->bus);
if (xfer->endpoint->refcount_alloc >= USB_EP_REF_MAX)
parm.err = USB_ERR_INVAL;
xfer->endpoint->refcount_alloc++;
if (xfer->endpoint->refcount_alloc == 0)
panic("usbd_transfer_setup(): Refcount wrapped to zero\n");
USB_BUS_UNLOCK(info->bus);
/*
* Whenever we set ppxfer[] then we
* also need to increment the
* "setup_refcount":
*/
info->setup_refcount++;
/*
* Transfer is successfully setup and
* can be used:
*/
ppxfer[n] = xfer;
}
/* check for error */
if (parm.err)
goto done;
}
if (buf || parm.err) {
goto done;
}
if (refcount == 0) {
/* no transfers - nothing to do ! */
goto done;
}
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[1] = parm.size[0];
/*
* The number of DMA tags required depends on
* the number of endpoints. The current estimate
* for maximum number of DMA tags per endpoint
* is two.
*/
parm.dma_tag_max += 2 * MIN(n_setup, USB_EP_MAX);
/*
* DMA tags for QH, TD, Data and more.
*/
parm.dma_tag_max += 8;
parm.dma_tag_p += parm.dma_tag_max;
parm.size[0] += ((uint8_t *)parm.dma_tag_p) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[3] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.dma_page_ptr) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* store offset temporarily */
parm.size[4] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.dma_page_cache_ptr) -
((uint8_t *)0);
/* store end offset temporarily */
parm.size[5] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.xfer_page_cache_ptr) -
((uint8_t *)0);
/* store end offset temporarily */
parm.size[2] = parm.size[0];
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
parm.size[6] = parm.size[0];
parm.size[0] += ((uint8_t *)parm.xfer_length_ptr) -
((uint8_t *)0);
/* align data properly */
parm.size[0] += ((-parm.size[0]) & (USB_HOST_ALIGN - 1));
/* allocate zeroed memory */
buf = malloc(parm.size[0], M_USB, M_WAITOK | M_ZERO);
if (buf == NULL) {
parm.err = USB_ERR_NOMEM;
DPRINTFN(0, "cannot allocate memory block for "
"configuration (%d bytes)\n",
parm.size[0]);
goto done;
}
parm.dma_tag_p = USB_ADD_BYTES(buf, parm.size[1]);
parm.dma_page_ptr = USB_ADD_BYTES(buf, parm.size[3]);
parm.dma_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[4]);
parm.xfer_page_cache_ptr = USB_ADD_BYTES(buf, parm.size[5]);
parm.xfer_length_ptr = USB_ADD_BYTES(buf, parm.size[6]);
}
done:
if (buf) {
if (info->setup_refcount == 0) {
/*
* "usbd_transfer_unsetup_sub" will unlock
* the bus mutex before returning !
*/
USB_BUS_LOCK(info->bus);
/* something went wrong */
usbd_transfer_unsetup_sub(info, 0);
}
}
if (parm.err) {
usbd_transfer_unsetup(ppxfer, n_setup);
}
return (parm.err);
}
/*------------------------------------------------------------------------*
* usbd_transfer_unsetup_sub - factored out code
*------------------------------------------------------------------------*/
static void
usbd_transfer_unsetup_sub(struct usb_xfer_root *info, uint8_t needs_delay)
{
#if USB_HAVE_BUSDMA
struct usb_page_cache *pc;
#endif
USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
/* wait for any outstanding DMA operations */
if (needs_delay) {
usb_timeout_t temp;
temp = usbd_get_dma_delay(info->udev);
if (temp != 0) {
usb_pause_mtx(&info->bus->bus_mtx,
USB_MS_TO_TICKS(temp));
}
}
/* make sure that our done messages are not queued anywhere */
usb_proc_mwait(info->done_p, &info->done_m[0], &info->done_m[1]);
USB_BUS_UNLOCK(info->bus);
#if USB_HAVE_BUSDMA
/* free DMA'able memory, if any */
pc = info->dma_page_cache_start;
while (pc != info->dma_page_cache_end) {
usb_pc_free_mem(pc);
pc++;
}
/* free DMA maps in all "xfer->frbuffers" */
pc = info->xfer_page_cache_start;
while (pc != info->xfer_page_cache_end) {
usb_pc_dmamap_destroy(pc);
pc++;
}
/* free all DMA tags */
usb_dma_tag_unsetup(&info->dma_parent_tag);
#endif
cv_destroy(&info->cv_drain);
/*
* free the "memory_base" last, hence the "info" structure is
* contained within the "memory_base"!
*/
free(info->memory_base, M_USB);
}
/*------------------------------------------------------------------------*
* usbd_transfer_unsetup - unsetup/free an array of USB transfers
*
* NOTE: All USB transfers in progress will get called back passing
* the error code "USB_ERR_CANCELLED" before this function
* returns.
*------------------------------------------------------------------------*/
void
usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup)
{
struct usb_xfer *xfer;
struct usb_xfer_root *info;
uint8_t needs_delay = 0;
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usbd_transfer_unsetup can sleep!");
while (n_setup--) {
xfer = pxfer[n_setup];
if (xfer == NULL)
continue;
info = xfer->xroot;
USB_XFER_LOCK(xfer);
USB_BUS_LOCK(info->bus);
/*
* HINT: when you start/stop a transfer, it might be a
* good idea to directly use the "pxfer[]" structure:
*
* usbd_transfer_start(sc->pxfer[0]);
* usbd_transfer_stop(sc->pxfer[0]);
*
* That way, if your code has many parts that will not
* stop running under the same lock, in other words
* "xfer_mtx", the usbd_transfer_start and
* usbd_transfer_stop functions will simply return
* when they detect a NULL pointer argument.
*
* To avoid any races we clear the "pxfer[]" pointer
* while holding the private mutex of the driver:
*/
pxfer[n_setup] = NULL;
USB_BUS_UNLOCK(info->bus);
USB_XFER_UNLOCK(xfer);
usbd_transfer_drain(xfer);
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable)
needs_delay = 1;
#endif
/*
* NOTE: default endpoint does not have an
* interface, even if endpoint->iface_index == 0
*/
USB_BUS_LOCK(info->bus);
xfer->endpoint->refcount_alloc--;
USB_BUS_UNLOCK(info->bus);
usb_callout_drain(&xfer->timeout_handle);
USB_BUS_LOCK(info->bus);
USB_ASSERT(info->setup_refcount != 0, ("Invalid setup "
"reference count\n"));
info->setup_refcount--;
if (info->setup_refcount == 0) {
usbd_transfer_unsetup_sub(info,
needs_delay);
} else {
USB_BUS_UNLOCK(info->bus);
}
}
}
/*------------------------------------------------------------------------*
* usbd_control_transfer_init - factored out code
*
* In USB Device Mode we have to wait for the SETUP packet which
* containst the "struct usb_device_request" structure, before we can
* transfer any data. In USB Host Mode we already have the SETUP
* packet at the moment the USB transfer is started. This leads us to
* having to setup the USB transfer at two different places in
* time. This function just contains factored out control transfer
* initialisation code, so that we don't duplicate the code.
*------------------------------------------------------------------------*/
static void
usbd_control_transfer_init(struct usb_xfer *xfer)
{
struct usb_device_request req;
/* copy out the USB request header */
usbd_copy_out(xfer->frbuffers, 0, &req, sizeof(req));
/* setup remainder */
xfer->flags_int.control_rem = UGETW(req.wLength);
/* copy direction to endpoint variable */
xfer->endpointno &= ~(UE_DIR_IN | UE_DIR_OUT);
xfer->endpointno |=
(req.bmRequestType & UT_READ) ? UE_DIR_IN : UE_DIR_OUT;
}
/*------------------------------------------------------------------------*
* usbd_setup_ctrl_transfer
*
* This function handles initialisation of control transfers. Control
* transfers are special in that regard that they can both transmit
* and receive data.
*
* Return values:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
static int
usbd_setup_ctrl_transfer(struct usb_xfer *xfer)
{
usb_frlength_t len;
/* Check for control endpoint stall */
if (xfer->flags.stall_pipe && xfer->flags_int.control_act) {
/* the control transfer is no longer active */
xfer->flags_int.control_stall = 1;
xfer->flags_int.control_act = 0;
} else {
/* don't stall control transfer by default */
xfer->flags_int.control_stall = 0;
}
/* Check for invalid number of frames */
if (xfer->nframes > 2) {
/*
* If you need to split a control transfer, you
* have to do one part at a time. Only with
* non-control transfers you can do multiple
* parts a time.
*/
DPRINTFN(0, "Too many frames: %u\n",
(unsigned int)xfer->nframes);
goto error;
}
/*
* Check if there is a control
* transfer in progress:
*/
if (xfer->flags_int.control_act) {
if (xfer->flags_int.control_hdr) {
/* clear send header flag */
xfer->flags_int.control_hdr = 0;
/* setup control transfer */
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
usbd_control_transfer_init(xfer);
}
}
/* get data length */
len = xfer->sumlen;
} else {
/* the size of the SETUP structure is hardcoded ! */
if (xfer->frlengths[0] != sizeof(struct usb_device_request)) {
DPRINTFN(0, "Wrong framelength %u != %zu\n",
xfer->frlengths[0], sizeof(struct
usb_device_request));
goto error;
}
/* check USB mode */
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
/* check number of frames */
if (xfer->nframes != 1) {
/*
* We need to receive the setup
* message first so that we know the
* data direction!
*/
DPRINTF("Misconfigured transfer\n");
goto error;
}
/*
* Set a dummy "control_rem" value. This
* variable will be overwritten later by a
* call to "usbd_control_transfer_init()" !
*/
xfer->flags_int.control_rem = 0xFFFF;
} else {
/* setup "endpoint" and "control_rem" */
usbd_control_transfer_init(xfer);
}
/* set transfer-header flag */
xfer->flags_int.control_hdr = 1;
/* get data length */
len = (xfer->sumlen - sizeof(struct usb_device_request));
}
/* check if there is a length mismatch */
if (len > xfer->flags_int.control_rem) {
DPRINTFN(0, "Length (%d) greater than "
"remaining length (%d)\n", len,
xfer->flags_int.control_rem);
goto error;
}
/* check if we are doing a short transfer */
if (xfer->flags.force_short_xfer) {
xfer->flags_int.control_rem = 0;
} else {
if ((len != xfer->max_data_length) &&
(len != xfer->flags_int.control_rem) &&
(xfer->nframes != 1)) {
DPRINTFN(0, "Short control transfer without "
"force_short_xfer set\n");
goto error;
}
xfer->flags_int.control_rem -= len;
}
/* the status part is executed when "control_act" is 0 */
if ((xfer->flags_int.control_rem > 0) ||
(xfer->flags.manual_status)) {
/* don't execute the STATUS stage yet */
xfer->flags_int.control_act = 1;
/* sanity check */
if ((!xfer->flags_int.control_hdr) &&
(xfer->nframes == 1)) {
/*
* This is not a valid operation!
*/
DPRINTFN(0, "Invalid parameter "
"combination\n");
goto error;
}
} else {
/* time to execute the STATUS stage */
xfer->flags_int.control_act = 0;
}
return (0); /* success */
error:
return (1); /* failure */
}
/*------------------------------------------------------------------------*
* usbd_transfer_submit - start USB hardware for the given transfer
*
* This function should only be called from the USB callback.
*------------------------------------------------------------------------*/
void
usbd_transfer_submit(struct usb_xfer *xfer)
{
struct usb_xfer_root *info;
struct usb_bus *bus;
usb_frcount_t x;
info = xfer->xroot;
bus = info->bus;
DPRINTF("xfer=%p, endpoint=%p, nframes=%d, dir=%s\n",
xfer, xfer->endpoint, xfer->nframes, USB_GET_DATA_ISREAD(xfer) ?
"read" : "write");
#ifdef USB_DEBUG
if (USB_DEBUG_VAR > 0) {
USB_BUS_LOCK(bus);
usb_dump_endpoint(xfer->endpoint);
USB_BUS_UNLOCK(bus);
}
#endif
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
USB_BUS_LOCK_ASSERT(bus, MA_NOTOWNED);
/* Only open the USB transfer once! */
if (!xfer->flags_int.open) {
xfer->flags_int.open = 1;
DPRINTF("open\n");
USB_BUS_LOCK(bus);
(xfer->endpoint->methods->open) (xfer);
USB_BUS_UNLOCK(bus);
}
/* set "transferring" flag */
xfer->flags_int.transferring = 1;
#if USB_HAVE_POWERD
/* increment power reference */
usbd_transfer_power_ref(xfer, 1);
#endif
/*
* Check if the transfer is waiting on a queue, most
* frequently the "done_q":
*/
if (xfer->wait_queue) {
USB_BUS_LOCK(bus);
usbd_transfer_dequeue(xfer);
USB_BUS_UNLOCK(bus);
}
/* clear "did_dma_delay" flag */
xfer->flags_int.did_dma_delay = 0;
/* clear "did_close" flag */
xfer->flags_int.did_close = 0;
#if USB_HAVE_BUSDMA
/* clear "bdma_setup" flag */
xfer->flags_int.bdma_setup = 0;
#endif
/* by default we cannot cancel any USB transfer immediately */
xfer->flags_int.can_cancel_immed = 0;
/* clear lengths and frame counts by default */
xfer->sumlen = 0;
xfer->actlen = 0;
xfer->aframes = 0;
/* clear any previous errors */
xfer->error = 0;
/* Check if the device is still alive */
if (info->udev->state < USB_STATE_POWERED) {
USB_BUS_LOCK(bus);
/*
* Must return cancelled error code else
* device drivers can hang.
*/
usbd_transfer_done(xfer, USB_ERR_CANCELLED);
USB_BUS_UNLOCK(bus);
return;
}
/* sanity check */
if (xfer->nframes == 0) {
if (xfer->flags.stall_pipe) {
/*
* Special case - want to stall without transferring
* any data:
*/
DPRINTF("xfer=%p nframes=0: stall "
"or clear stall!\n", xfer);
USB_BUS_LOCK(bus);
xfer->flags_int.can_cancel_immed = 1;
/* start the transfer */
usb_command_wrapper(&xfer->endpoint->endpoint_q, xfer);
USB_BUS_UNLOCK(bus);
return;
}
USB_BUS_LOCK(bus);
usbd_transfer_done(xfer, USB_ERR_INVAL);
USB_BUS_UNLOCK(bus);
return;
}
/* compute some variables */
for (x = 0; x != xfer->nframes; x++) {
/* make a copy of the frlenghts[] */
xfer->frlengths[x + xfer->max_frame_count] = xfer->frlengths[x];
/* compute total transfer length */
xfer->sumlen += xfer->frlengths[x];
if (xfer->sumlen < xfer->frlengths[x]) {
/* length wrapped around */
USB_BUS_LOCK(bus);
usbd_transfer_done(xfer, USB_ERR_INVAL);
USB_BUS_UNLOCK(bus);
return;
}
}
/* clear some internal flags */
xfer->flags_int.short_xfer_ok = 0;
xfer->flags_int.short_frames_ok = 0;
/* check if this is a control transfer */
if (xfer->flags_int.control_xfr) {
if (usbd_setup_ctrl_transfer(xfer)) {
USB_BUS_LOCK(bus);
usbd_transfer_done(xfer, USB_ERR_STALLED);
USB_BUS_UNLOCK(bus);
return;
}
}
/*
* Setup filtered version of some transfer flags,
* in case of data read direction
*/
if (USB_GET_DATA_ISREAD(xfer)) {
if (xfer->flags.short_frames_ok) {
xfer->flags_int.short_xfer_ok = 1;
xfer->flags_int.short_frames_ok = 1;
} else if (xfer->flags.short_xfer_ok) {
xfer->flags_int.short_xfer_ok = 1;
/* check for control transfer */
if (xfer->flags_int.control_xfr) {
/*
* 1) Control transfers do not support
* reception of multiple short USB
* frames in host mode and device side
* mode, with exception of:
*
* 2) Due to sometimes buggy device
* side firmware we need to do a
* STATUS stage in case of short
* control transfers in USB host mode.
* The STATUS stage then becomes the
* "alt_next" to the DATA stage.
*/
xfer->flags_int.short_frames_ok = 1;
}
}
}
/*
* Check if BUS-DMA support is enabled and try to load virtual
* buffers into DMA, if any:
*/
#if USB_HAVE_BUSDMA
if (xfer->flags_int.bdma_enable) {
/* insert the USB transfer last in the BUS-DMA queue */
usb_command_wrapper(&xfer->xroot->dma_q, xfer);
return;
}
#endif
/*
* Enter the USB transfer into the Host Controller or
* Device Controller schedule:
*/
usbd_pipe_enter(xfer);
}
/*------------------------------------------------------------------------*
* usbd_pipe_enter - factored out code
*------------------------------------------------------------------------*/
void
usbd_pipe_enter(struct usb_xfer *xfer)
{
struct usb_endpoint *ep;
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
USB_BUS_LOCK(xfer->xroot->bus);
ep = xfer->endpoint;
DPRINTF("enter\n");
/* the transfer can now be cancelled */
xfer->flags_int.can_cancel_immed = 1;
/* enter the transfer */
(ep->methods->enter) (xfer);
/* check for transfer error */
if (xfer->error) {
/* some error has happened */
usbd_transfer_done(xfer, 0);
USB_BUS_UNLOCK(xfer->xroot->bus);
return;
}
/* start the transfer */
usb_command_wrapper(&ep->endpoint_q, xfer);
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usbd_transfer_start - start an USB transfer
*
* NOTE: Calling this function more than one time will only
* result in a single transfer start, until the USB transfer
* completes.
*------------------------------------------------------------------------*/
void
usbd_transfer_start(struct usb_xfer *xfer)
{
if (xfer == NULL) {
/* transfer is gone */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* mark the USB transfer started */
if (!xfer->flags_int.started) {
/* lock the BUS lock to avoid races updating flags_int */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags_int.started = 1;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/* check if the USB transfer callback is already transferring */
if (xfer->flags_int.transferring) {
return;
}
USB_BUS_LOCK(xfer->xroot->bus);
/* call the USB transfer callback */
usbd_callback_ss_done_defer(xfer);
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usbd_transfer_stop - stop an USB transfer
*
* NOTE: Calling this function more than one time will only
* result in a single transfer stop.
* NOTE: When this function returns it is not safe to free nor
* reuse any DMA buffers. See "usbd_transfer_drain()".
*------------------------------------------------------------------------*/
void
usbd_transfer_stop(struct usb_xfer *xfer)
{
struct usb_endpoint *ep;
if (xfer == NULL) {
/* transfer is gone */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* check if the USB transfer was ever opened */
if (!xfer->flags_int.open) {
if (xfer->flags_int.started) {
/* nothing to do except clearing the "started" flag */
/* lock the BUS lock to avoid races updating flags_int */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags_int.started = 0;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
return;
}
/* try to stop the current USB transfer */
USB_BUS_LOCK(xfer->xroot->bus);
/* override any previous error */
xfer->error = USB_ERR_CANCELLED;
/*
* Clear "open" and "started" when both private and USB lock
* is locked so that we don't get a race updating "flags_int"
*/
xfer->flags_int.open = 0;
xfer->flags_int.started = 0;
/*
* Check if we can cancel the USB transfer immediately.
*/
if (xfer->flags_int.transferring) {
if (xfer->flags_int.can_cancel_immed &&
(!xfer->flags_int.did_close)) {
DPRINTF("close\n");
/*
* The following will lead to an USB_ERR_CANCELLED
* error code being passed to the USB callback.
*/
(xfer->endpoint->methods->close) (xfer);
/* only close once */
xfer->flags_int.did_close = 1;
} else {
/* need to wait for the next done callback */
}
} else {
DPRINTF("close\n");
/* close here and now */
(xfer->endpoint->methods->close) (xfer);
/*
* Any additional DMA delay is done by
* "usbd_transfer_unsetup()".
*/
/*
* Special case. Check if we need to restart a blocked
* endpoint.
*/
ep = xfer->endpoint;
/*
* If the current USB transfer is completing we need
* to start the next one:
*/
if (ep->endpoint_q.curr == xfer) {
usb_command_wrapper(&ep->endpoint_q, NULL);
}
}
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usbd_transfer_pending
*
* This function will check if an USB transfer is pending which is a
* little bit complicated!
* Return values:
* 0: Not pending
* 1: Pending: The USB transfer will receive a callback in the future.
*------------------------------------------------------------------------*/
uint8_t
usbd_transfer_pending(struct usb_xfer *xfer)
{
struct usb_xfer_root *info;
struct usb_xfer_queue *pq;
if (xfer == NULL) {
/* transfer is gone */
return (0);
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
if (xfer->flags_int.transferring) {
/* trivial case */
return (1);
}
USB_BUS_LOCK(xfer->xroot->bus);
if (xfer->wait_queue) {
/* we are waiting on a queue somewhere */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (1);
}
info = xfer->xroot;
pq = &info->done_q;
if (pq->curr == xfer) {
/* we are currently scheduled for callback */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (1);
}
/* we are not pending */
USB_BUS_UNLOCK(xfer->xroot->bus);
return (0);
}
/*------------------------------------------------------------------------*
* usbd_transfer_drain
*
* This function will stop the USB transfer and wait for any
* additional BUS-DMA and HW-DMA operations to complete. Buffers that
* are loaded into DMA can safely be freed or reused after that this
* function has returned.
*------------------------------------------------------------------------*/
void
usbd_transfer_drain(struct usb_xfer *xfer)
{
WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
"usbd_transfer_drain can sleep!");
if (xfer == NULL) {
/* transfer is gone */
return;
}
if (xfer->xroot->xfer_mtx != &Giant) {
USB_XFER_LOCK_ASSERT(xfer, MA_NOTOWNED);
}
USB_XFER_LOCK(xfer);
usbd_transfer_stop(xfer);
while (usbd_transfer_pending(xfer) ||
xfer->flags_int.doing_callback) {
/*
* It is allowed that the callback can drop its
* transfer mutex. In that case checking only
* "usbd_transfer_pending()" is not enough to tell if
* the USB transfer is fully drained. We also need to
* check the internal "doing_callback" flag.
*/
xfer->flags_int.draining = 1;
/*
* Wait until the current outstanding USB
* transfer is complete !
*/
cv_wait(&xfer->xroot->cv_drain, xfer->xroot->xfer_mtx);
}
USB_XFER_UNLOCK(xfer);
}
struct usb_page_cache *
usbd_xfer_get_frame(struct usb_xfer *xfer, usb_frcount_t frindex)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
return (&xfer->frbuffers[frindex]);
}
/*------------------------------------------------------------------------*
* usbd_xfer_get_fps_shift
*
* The following function is only useful for isochronous transfers. It
* returns how many times the frame execution rate has been shifted
* down.
*
* Return value:
* Success: 0..3
* Failure: 0
*------------------------------------------------------------------------*/
uint8_t
usbd_xfer_get_fps_shift(struct usb_xfer *xfer)
{
return (xfer->fps_shift);
}
usb_frlength_t
usbd_xfer_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
return (xfer->frlengths[frindex]);
}
/*------------------------------------------------------------------------*
* usbd_xfer_set_frame_data
*
* This function sets the pointer of the buffer that should
* loaded directly into DMA for the given USB frame. Passing "ptr"
* equal to NULL while the corresponding "frlength" is greater
* than zero gives undefined results!
*------------------------------------------------------------------------*/
void
usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
void *ptr, usb_frlength_t len)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
/* set virtual address to load and length */
xfer->frbuffers[frindex].buffer = ptr;
usbd_xfer_set_frame_len(xfer, frindex, len);
}
void
usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
void **ptr, int *len)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
if (ptr != NULL)
*ptr = xfer->frbuffers[frindex].buffer;
if (len != NULL)
*len = xfer->frlengths[frindex];
}
/*------------------------------------------------------------------------*
* usbd_xfer_old_frame_length
*
* This function returns the framelength of the given frame at the
* time the transfer was submitted. This function can be used to
* compute the starting data pointer of the next isochronous frame
* when an isochronous transfer has completed.
*------------------------------------------------------------------------*/
usb_frlength_t
usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
return (xfer->frlengths[frindex + xfer->max_frame_count]);
}
void
usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen, int *aframes,
int *nframes)
{
if (actlen != NULL)
*actlen = xfer->actlen;
if (sumlen != NULL)
*sumlen = xfer->sumlen;
if (aframes != NULL)
*aframes = xfer->aframes;
if (nframes != NULL)
*nframes = xfer->nframes;
}
/*------------------------------------------------------------------------*
* usbd_xfer_set_frame_offset
*
* This function sets the frame data buffer offset relative to the beginning
* of the USB DMA buffer allocated for this USB transfer.
*------------------------------------------------------------------------*/
void
usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
usb_frcount_t frindex)
{
KASSERT(!xfer->flags.ext_buffer, ("Cannot offset data frame "
"when the USB buffer is external\n"));
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
/* set virtual address to load */
xfer->frbuffers[frindex].buffer =
USB_ADD_BYTES(xfer->local_buffer, offset);
}
void
usbd_xfer_set_interval(struct usb_xfer *xfer, int i)
{
xfer->interval = i;
}
void
usbd_xfer_set_timeout(struct usb_xfer *xfer, int t)
{
xfer->timeout = t;
}
void
usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n)
{
xfer->nframes = n;
}
usb_frcount_t
usbd_xfer_max_frames(struct usb_xfer *xfer)
{
return (xfer->max_frame_count);
}
usb_frlength_t
usbd_xfer_max_len(struct usb_xfer *xfer)
{
return (xfer->max_data_length);
}
usb_frlength_t
usbd_xfer_max_framelen(struct usb_xfer *xfer)
{
return (xfer->max_frame_size);
}
void
usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
usb_frlength_t len)
{
KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
xfer->frlengths[frindex] = len;
}
/*------------------------------------------------------------------------*
* usb_callback_proc - factored out code
*
* This function performs USB callbacks.
*------------------------------------------------------------------------*/
static void
usb_callback_proc(struct usb_proc_msg *_pm)
{
struct usb_done_msg *pm = (void *)_pm;
struct usb_xfer_root *info = pm->xroot;
/* Change locking order */
USB_BUS_UNLOCK(info->bus);
/*
* We exploit the fact that the mutex is the same for all
* callbacks that will be called from this thread:
*/
mtx_lock(info->xfer_mtx);
USB_BUS_LOCK(info->bus);
/* Continue where we lost track */
usb_command_wrapper(&info->done_q,
info->done_q.curr);
mtx_unlock(info->xfer_mtx);
}
/*------------------------------------------------------------------------*
* usbd_callback_ss_done_defer
*
* This function will defer the start, stop and done callback to the
* correct thread.
*------------------------------------------------------------------------*/
static void
usbd_callback_ss_done_defer(struct usb_xfer *xfer)
{
struct usb_xfer_root *info = xfer->xroot;
struct usb_xfer_queue *pq = &info->done_q;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
if (pq->curr != xfer) {
usbd_transfer_enqueue(pq, xfer);
}
if (!pq->recurse_1) {
/*
* We have to postpone the callback due to the fact we
* will have a Lock Order Reversal, LOR, if we try to
* proceed !
*/
if (usb_proc_msignal(info->done_p,
&info->done_m[0], &info->done_m[1])) {
/* ignore */
}
} else {
/* clear second recurse flag */
pq->recurse_2 = 0;
}
return;
}
/*------------------------------------------------------------------------*
* usbd_callback_wrapper
*
* This is a wrapper for USB callbacks. This wrapper does some
* auto-magic things like figuring out if we can call the callback
* directly from the current context or if we need to wakeup the
* interrupt process.
*------------------------------------------------------------------------*/
static void
usbd_callback_wrapper(struct usb_xfer_queue *pq)
{
struct usb_xfer *xfer = pq->curr;
struct usb_xfer_root *info = xfer->xroot;
USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
if (!mtx_owned(info->xfer_mtx) && !SCHEDULER_STOPPED()) {
/*
* Cases that end up here:
*
* 5) HW interrupt done callback or other source.
*/
DPRINTFN(3, "case 5\n");
/*
* We have to postpone the callback due to the fact we
* will have a Lock Order Reversal, LOR, if we try to
* proceed !
*/
if (usb_proc_msignal(info->done_p,
&info->done_m[0], &info->done_m[1])) {
/* ignore */
}
return;
}
/*
* Cases that end up here:
*
* 1) We are starting a transfer
* 2) We are prematurely calling back a transfer
* 3) We are stopping a transfer
* 4) We are doing an ordinary callback
*/
DPRINTFN(3, "case 1-4\n");
/* get next USB transfer in the queue */
info->done_q.curr = NULL;
/* set flag in case of drain */
xfer->flags_int.doing_callback = 1;
USB_BUS_UNLOCK(info->bus);
USB_BUS_LOCK_ASSERT(info->bus, MA_NOTOWNED);
/* set correct USB state for callback */
if (!xfer->flags_int.transferring) {
xfer->usb_state = USB_ST_SETUP;
if (!xfer->flags_int.started) {
/* we got stopped before we even got started */
USB_BUS_LOCK(info->bus);
goto done;
}
} else {
if (usbd_callback_wrapper_sub(xfer)) {
/* the callback has been deferred */
USB_BUS_LOCK(info->bus);
goto done;
}
#if USB_HAVE_POWERD
/* decrement power reference */
usbd_transfer_power_ref(xfer, -1);
#endif
xfer->flags_int.transferring = 0;
if (xfer->error) {
xfer->usb_state = USB_ST_ERROR;
} else {
/* set transferred state */
xfer->usb_state = USB_ST_TRANSFERRED;
#if USB_HAVE_BUSDMA
/* sync DMA memory, if any */
if (xfer->flags_int.bdma_enable &&
(!xfer->flags_int.bdma_no_post_sync)) {
usb_bdma_post_sync(xfer);
}
#endif
}
}
#if USB_HAVE_PF
if (xfer->usb_state != USB_ST_SETUP)
usbpf_xfertap(xfer, USBPF_XFERTAP_DONE);
#endif
/* call processing routine */
(xfer->callback) (xfer, xfer->error);
/* pickup the USB mutex again */
USB_BUS_LOCK(info->bus);
/*
* Check if we got started after that we got cancelled, but
* before we managed to do the callback.
*/
if ((!xfer->flags_int.open) &&
(xfer->flags_int.started) &&
(xfer->usb_state == USB_ST_ERROR)) {
/* clear flag in case of drain */
xfer->flags_int.doing_callback = 0;
/* try to loop, but not recursivly */
usb_command_wrapper(&info->done_q, xfer);
return;
}
done:
/* clear flag in case of drain */
xfer->flags_int.doing_callback = 0;
/*
* Check if we are draining.
*/
if (xfer->flags_int.draining &&
(!xfer->flags_int.transferring)) {
/* "usbd_transfer_drain()" is waiting for end of transfer */
xfer->flags_int.draining = 0;
cv_broadcast(&info->cv_drain);
}
/* do the next callback, if any */
usb_command_wrapper(&info->done_q,
info->done_q.curr);
}
/*------------------------------------------------------------------------*
* usb_dma_delay_done_cb
*
* This function is called when the DMA delay has been exectuded, and
* will make sure that the callback is called to complete the USB
* transfer. This code path is ususally only used when there is an USB
* error like USB_ERR_CANCELLED.
*------------------------------------------------------------------------*/
void
usb_dma_delay_done_cb(struct usb_xfer *xfer)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTFN(3, "Completed %p\n", xfer);
/* queue callback for execution, again */
usbd_transfer_done(xfer, 0);
}
/*------------------------------------------------------------------------*
* usbd_transfer_dequeue
*
* - This function is used to remove an USB transfer from a USB
* transfer queue.
*
* - This function can be called multiple times in a row.
*------------------------------------------------------------------------*/
void
usbd_transfer_dequeue(struct usb_xfer *xfer)
{
struct usb_xfer_queue *pq;
pq = xfer->wait_queue;
if (pq) {
TAILQ_REMOVE(&pq->head, xfer, wait_entry);
xfer->wait_queue = NULL;
}
}
/*------------------------------------------------------------------------*
* usbd_transfer_enqueue
*
* - This function is used to insert an USB transfer into a USB *
* transfer queue.
*
* - This function can be called multiple times in a row.
*------------------------------------------------------------------------*/
void
usbd_transfer_enqueue(struct usb_xfer_queue *pq, struct usb_xfer *xfer)
{
/*
* Insert the USB transfer into the queue, if it is not
* already on a USB transfer queue:
*/
if (xfer->wait_queue == NULL) {
xfer->wait_queue = pq;
TAILQ_INSERT_TAIL(&pq->head, xfer, wait_entry);
}
}
/*------------------------------------------------------------------------*
* usbd_transfer_done
*
* - This function is used to remove an USB transfer from the busdma,
* pipe or interrupt queue.
*
* - This function is used to queue the USB transfer on the done
* queue.
*
* - This function is used to stop any USB transfer timeouts.
*------------------------------------------------------------------------*/
void
usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTF("err=%s\n", usbd_errstr(error));
/*
* If we are not transferring then just return.
* This can happen during transfer cancel.
*/
if (!xfer->flags_int.transferring) {
DPRINTF("not transferring\n");
/* end of control transfer, if any */
xfer->flags_int.control_act = 0;
return;
}
/* only set transfer error if not already set */
if (!xfer->error) {
xfer->error = error;
}
/* stop any callouts */
usb_callout_stop(&xfer->timeout_handle);
/*
* If we are waiting on a queue, just remove the USB transfer
* from the queue, if any. We should have the required locks
* locked to do the remove when this function is called.
*/
usbd_transfer_dequeue(xfer);
#if USB_HAVE_BUSDMA
if (mtx_owned(xfer->xroot->xfer_mtx)) {
struct usb_xfer_queue *pq;
/*
* If the private USB lock is not locked, then we assume
* that the BUS-DMA load stage has been passed:
*/
pq = &xfer->xroot->dma_q;
if (pq->curr == xfer) {
/* start the next BUS-DMA load, if any */
usb_command_wrapper(pq, NULL);
}
}
#endif
/* keep some statistics */
if (xfer->error) {
xfer->xroot->bus->stats_err.uds_requests
[xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++;
} else {
xfer->xroot->bus->stats_ok.uds_requests
[xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++;
}
/* call the USB transfer callback */
usbd_callback_ss_done_defer(xfer);
}
/*------------------------------------------------------------------------*
* usbd_transfer_start_cb
*
* This function is called to start the USB transfer when
* "xfer->interval" is greater than zero, and and the endpoint type is
* BULK or CONTROL.
*------------------------------------------------------------------------*/
static void
usbd_transfer_start_cb(void *arg)
{
struct usb_xfer *xfer = arg;
struct usb_endpoint *ep = xfer->endpoint;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
DPRINTF("start\n");
#if USB_HAVE_PF
usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT);
#endif
/* the transfer can now be cancelled */
xfer->flags_int.can_cancel_immed = 1;
/* start USB transfer, if no error */
if (xfer->error == 0)
(ep->methods->start) (xfer);
/* check for transfer error */
if (xfer->error) {
/* some error has happened */
usbd_transfer_done(xfer, 0);
}
}
/*------------------------------------------------------------------------*
* usbd_xfer_set_stall
*
* This function is used to set the stall flag outside the
* callback. This function is NULL safe.
*------------------------------------------------------------------------*/
void
usbd_xfer_set_stall(struct usb_xfer *xfer)
{
if (xfer == NULL) {
/* tearing down */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* avoid any races by locking the USB mutex */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags.stall_pipe = 1;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
int
usbd_xfer_is_stalled(struct usb_xfer *xfer)
{
return (xfer->endpoint->is_stalled);
}
/*------------------------------------------------------------------------*
* usbd_transfer_clear_stall
*
* This function is used to clear the stall flag outside the
* callback. This function is NULL safe.
*------------------------------------------------------------------------*/
void
usbd_transfer_clear_stall(struct usb_xfer *xfer)
{
if (xfer == NULL) {
/* tearing down */
return;
}
USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
/* avoid any races by locking the USB mutex */
USB_BUS_LOCK(xfer->xroot->bus);
xfer->flags.stall_pipe = 0;
USB_BUS_UNLOCK(xfer->xroot->bus);
}
/*------------------------------------------------------------------------*
* usbd_pipe_start
*
* This function is used to add an USB transfer to the pipe transfer list.
*------------------------------------------------------------------------*/
void
usbd_pipe_start(struct usb_xfer_queue *pq)
{
struct usb_endpoint *ep;
struct usb_xfer *xfer;
uint8_t type;
xfer = pq->curr;
ep = xfer->endpoint;
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/*
* If the endpoint is already stalled we do nothing !
*/
if (ep->is_stalled) {
return;
}
/*
* Check if we are supposed to stall the endpoint:
*/
if (xfer->flags.stall_pipe) {
struct usb_device *udev;
struct usb_xfer_root *info;
/* clear stall command */
xfer->flags.stall_pipe = 0;
/* get pointer to USB device */
info = xfer->xroot;
udev = info->udev;
/*
* Only stall BULK and INTERRUPT endpoints.
*/
type = (ep->edesc->bmAttributes & UE_XFERTYPE);
if ((type == UE_BULK) ||
(type == UE_INTERRUPT)) {
uint8_t did_stall;
did_stall = 1;
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
(udev->bus->methods->set_stall) (
udev, NULL, ep, &did_stall);
} else if (udev->ctrl_xfer[1]) {
info = udev->ctrl_xfer[1]->xroot;
usb_proc_msignal(
&info->bus->non_giant_callback_proc,
&udev->cs_msg[0], &udev->cs_msg[1]);
} else {
/* should not happen */
DPRINTFN(0, "No stall handler\n");
}
/*
* Check if we should stall. Some USB hardware
* handles set- and clear-stall in hardware.
*/
if (did_stall) {
/*
* The transfer will be continued when
* the clear-stall control endpoint
* message is received.
*/
ep->is_stalled = 1;
return;
}
} else if (type == UE_ISOCHRONOUS) {
/*
* Make sure any FIFO overflow or other FIFO
* error conditions go away by resetting the
* endpoint FIFO through the clear stall
* method.
*/
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
(udev->bus->methods->clear_stall) (udev, ep);
}
}
}
/* Set or clear stall complete - special case */
if (xfer->nframes == 0) {
/* we are complete */
xfer->aframes = 0;
usbd_transfer_done(xfer, 0);
return;
}
/*
* Handled cases:
*
* 1) Start the first transfer queued.
*
* 2) Re-start the current USB transfer.
*/
/*
* Check if there should be any
* pre transfer start delay:
*/
if (xfer->interval > 0) {
type = (ep->edesc->bmAttributes & UE_XFERTYPE);
if ((type == UE_BULK) ||
(type == UE_CONTROL)) {
usbd_transfer_timeout_ms(xfer,
&usbd_transfer_start_cb,
xfer->interval);
return;
}
}
DPRINTF("start\n");
#if USB_HAVE_PF
usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT);
#endif
/* the transfer can now be cancelled */
xfer->flags_int.can_cancel_immed = 1;
/* start USB transfer, if no error */
if (xfer->error == 0)
(ep->methods->start) (xfer);
/* check for transfer error */
if (xfer->error) {
/* some error has happened */
usbd_transfer_done(xfer, 0);
}
}
/*------------------------------------------------------------------------*
* usbd_transfer_timeout_ms
*
* This function is used to setup a timeout on the given USB
* transfer. If the timeout has been deferred the callback given by
* "cb" will get called after "ms" milliseconds.
*------------------------------------------------------------------------*/
void
usbd_transfer_timeout_ms(struct usb_xfer *xfer,
void (*cb) (void *arg), usb_timeout_t ms)
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
/* defer delay */
usb_callout_reset(&xfer->timeout_handle,
USB_MS_TO_TICKS(ms), cb, xfer);
}
/*------------------------------------------------------------------------*
* usbd_callback_wrapper_sub
*
* - This function will update variables in an USB transfer after
* that the USB transfer is complete.
*
* - This function is used to start the next USB transfer on the
* ep transfer queue, if any.
*
* NOTE: In some special cases the USB transfer will not be removed from
* the pipe queue, but remain first. To enforce USB transfer removal call
* this function passing the error code "USB_ERR_CANCELLED".
*
* Return values:
* 0: Success.
* Else: The callback has been deferred.
*------------------------------------------------------------------------*/
static uint8_t
usbd_callback_wrapper_sub(struct usb_xfer *xfer)
{
struct usb_endpoint *ep;
struct usb_bus *bus;
usb_frcount_t x;
bus = xfer->xroot->bus;
if ((!xfer->flags_int.open) &&
(!xfer->flags_int.did_close)) {
DPRINTF("close\n");
USB_BUS_LOCK(bus);
(xfer->endpoint->methods->close) (xfer);
USB_BUS_UNLOCK(bus);
/* only close once */
xfer->flags_int.did_close = 1;
return (1); /* wait for new callback */
}
/*
* If we have a non-hardware induced error we
* need to do the DMA delay!
*/
if (xfer->error != 0 && !xfer->flags_int.did_dma_delay &&
(xfer->error == USB_ERR_CANCELLED ||
xfer->error == USB_ERR_TIMEOUT ||
bus->methods->start_dma_delay != NULL)) {
usb_timeout_t temp;
/* only delay once */
xfer->flags_int.did_dma_delay = 1;
/* we can not cancel this delay */
xfer->flags_int.can_cancel_immed = 0;
temp = usbd_get_dma_delay(xfer->xroot->udev);
DPRINTFN(3, "DMA delay, %u ms, "
"on %p\n", temp, xfer);
if (temp != 0) {
USB_BUS_LOCK(bus);
/*
* Some hardware solutions have dedicated
* events when it is safe to free DMA'ed
* memory. For the other hardware platforms we
* use a static delay.
*/
if (bus->methods->start_dma_delay != NULL) {
(bus->methods->start_dma_delay) (xfer);
} else {
usbd_transfer_timeout_ms(xfer,
(void (*)(void *))&usb_dma_delay_done_cb,
temp);
}
USB_BUS_UNLOCK(bus);
return (1); /* wait for new callback */
}
}
/* check actual number of frames */
if (xfer->aframes > xfer->nframes) {
if (xfer->error == 0) {
panic("%s: actual number of frames, %d, is "
"greater than initial number of frames, %d\n",
__FUNCTION__, xfer->aframes, xfer->nframes);
} else {
/* just set some valid value */
xfer->aframes = xfer->nframes;
}
}
/* compute actual length */
xfer->actlen = 0;
for (x = 0; x != xfer->aframes; x++) {
xfer->actlen += xfer->frlengths[x];
}
/*
* Frames that were not transferred get zero actual length in
* case the USB device driver does not check the actual number
* of frames transferred, "xfer->aframes":
*/
for (; x < xfer->nframes; x++) {
usbd_xfer_set_frame_len(xfer, x, 0);
}
/* check actual length */
if (xfer->actlen > xfer->sumlen) {
if (xfer->error == 0) {
panic("%s: actual length, %d, is greater than "
"initial length, %d\n",
__FUNCTION__, xfer->actlen, xfer->sumlen);
} else {
/* just set some valid value */
xfer->actlen = xfer->sumlen;
}
}
DPRINTFN(1, "xfer=%p endpoint=%p sts=%d alen=%d, slen=%d, afrm=%d, nfrm=%d\n",
xfer, xfer->endpoint, xfer->error, xfer->actlen, xfer->sumlen,
xfer->aframes, xfer->nframes);
if (xfer->error) {
/* end of control transfer, if any */
xfer->flags_int.control_act = 0;
/* check if we should block the execution queue */
if ((xfer->error != USB_ERR_CANCELLED) &&
(xfer->flags.pipe_bof)) {
DPRINTFN(2, "xfer=%p: Block On Failure "
"on endpoint=%p\n", xfer, xfer->endpoint);
goto done;
}
} else {
/* check for short transfers */
if (xfer->actlen < xfer->sumlen) {
/* end of control transfer, if any */
xfer->flags_int.control_act = 0;
if (!xfer->flags_int.short_xfer_ok) {
xfer->error = USB_ERR_SHORT_XFER;
if (xfer->flags.pipe_bof) {
DPRINTFN(2, "xfer=%p: Block On Failure on "
"Short Transfer on endpoint %p.\n",
xfer, xfer->endpoint);
goto done;
}
}
} else {
/*
* Check if we are in the middle of a
* control transfer:
*/
if (xfer->flags_int.control_act) {
DPRINTFN(5, "xfer=%p: Control transfer "
"active on endpoint=%p\n", xfer, xfer->endpoint);
goto done;
}
}
}
ep = xfer->endpoint;
/*
* If the current USB transfer is completing we need to start the
* next one:
*/
USB_BUS_LOCK(bus);
if (ep->endpoint_q.curr == xfer) {
usb_command_wrapper(&ep->endpoint_q, NULL);
if (ep->endpoint_q.curr || TAILQ_FIRST(&ep->endpoint_q.head)) {
/* there is another USB transfer waiting */
} else {
/* this is the last USB transfer */
/* clear isochronous sync flag */
xfer->endpoint->is_synced = 0;
}
}
USB_BUS_UNLOCK(bus);
done:
return (0);
}
/*------------------------------------------------------------------------*
* usb_command_wrapper
*
* This function is used to execute commands non-recursivly on an USB
* transfer.
*------------------------------------------------------------------------*/
void
usb_command_wrapper(struct usb_xfer_queue *pq, struct usb_xfer *xfer)
{
if (xfer) {
/*
* If the transfer is not already processing,
* queue it!
*/
if (pq->curr != xfer) {
usbd_transfer_enqueue(pq, xfer);
if (pq->curr != NULL) {
/* something is already processing */
DPRINTFN(6, "busy %p\n", pq->curr);
return;
}
}
} else {
/* Get next element in queue */
pq->curr = NULL;
}
if (!pq->recurse_1) {
do {
/* set both recurse flags */
pq->recurse_1 = 1;
pq->recurse_2 = 1;
if (pq->curr == NULL) {
xfer = TAILQ_FIRST(&pq->head);
if (xfer) {
TAILQ_REMOVE(&pq->head, xfer,
wait_entry);
xfer->wait_queue = NULL;
pq->curr = xfer;
} else {
break;
}
}
DPRINTFN(6, "cb %p (enter)\n", pq->curr);
(pq->command) (pq);
DPRINTFN(6, "cb %p (leave)\n", pq->curr);
} while (!pq->recurse_2);
/* clear first recurse flag */
pq->recurse_1 = 0;
} else {
/* clear second recurse flag */
pq->recurse_2 = 0;
}
}
/*------------------------------------------------------------------------*
* usbd_ctrl_transfer_setup
*
* This function is used to setup the default USB control endpoint
* transfer.
*------------------------------------------------------------------------*/
void
usbd_ctrl_transfer_setup(struct usb_device *udev)
{
struct usb_xfer *xfer;
uint8_t no_resetup;
uint8_t iface_index;
/* check for root HUB */
if (udev->parent_hub == NULL)
return;
repeat:
xfer = udev->ctrl_xfer[0];
if (xfer) {
USB_XFER_LOCK(xfer);
no_resetup =
((xfer->address == udev->address) &&
(udev->ctrl_ep_desc.wMaxPacketSize[0] ==
udev->ddesc.bMaxPacketSize));
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
if (no_resetup) {
/*
* NOTE: checking "xfer->address" and
* starting the USB transfer must be
* atomic!
*/
usbd_transfer_start(xfer);
}
}
USB_XFER_UNLOCK(xfer);
} else {
no_resetup = 0;
}
if (no_resetup) {
/*
* All parameters are exactly the same like before.
* Just return.
*/
return;
}
/*
* Update wMaxPacketSize for the default control endpoint:
*/
udev->ctrl_ep_desc.wMaxPacketSize[0] =
udev->ddesc.bMaxPacketSize;
/*
* Unsetup any existing USB transfer:
*/
usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX);
/*
* Reset clear stall error counter.
*/
udev->clear_stall_errors = 0;
/*
* Try to setup a new USB transfer for the
* default control endpoint:
*/
iface_index = 0;
if (usbd_transfer_setup(udev, &iface_index,
udev->ctrl_xfer, usb_control_ep_cfg, USB_CTRL_XFER_MAX, NULL,
&udev->device_mtx)) {
DPRINTFN(0, "could not setup default "
"USB transfer\n");
} else {
goto repeat;
}
}
/*------------------------------------------------------------------------*
* usbd_clear_data_toggle - factored out code
*
* NOTE: the intention of this function is not to reset the hardware
* data toggle.
*------------------------------------------------------------------------*/
void
usbd_clear_stall_locked(struct usb_device *udev, struct usb_endpoint *ep)
{
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
/* check that we have a valid case */
if (udev->flags.usb_mode == USB_MODE_HOST &&
udev->parent_hub != NULL &&
udev->bus->methods->clear_stall != NULL &&
ep->methods != NULL) {
(udev->bus->methods->clear_stall) (udev, ep);
}
}
/*------------------------------------------------------------------------*
* usbd_clear_data_toggle - factored out code
*
* NOTE: the intention of this function is not to reset the hardware
* data toggle on the USB device side.
*------------------------------------------------------------------------*/
void
usbd_clear_data_toggle(struct usb_device *udev, struct usb_endpoint *ep)
{
DPRINTFN(5, "udev=%p endpoint=%p\n", udev, ep);
USB_BUS_LOCK(udev->bus);
ep->toggle_next = 0;
/* some hardware needs a callback to clear the data toggle */
usbd_clear_stall_locked(udev, ep);
USB_BUS_UNLOCK(udev->bus);
}
/*------------------------------------------------------------------------*
* usbd_clear_stall_callback - factored out clear stall callback
*
* Input parameters:
* xfer1: Clear Stall Control Transfer
* xfer2: Stalled USB Transfer
*
* This function is NULL safe.
*
* Return values:
* 0: In progress
* Else: Finished
*
* Clear stall config example:
*
* static const struct usb_config my_clearstall = {
* .type = UE_CONTROL,
* .endpoint = 0,
* .direction = UE_DIR_ANY,
* .interval = 50, //50 milliseconds
* .bufsize = sizeof(struct usb_device_request),
* .timeout = 1000, //1.000 seconds
* .callback = &my_clear_stall_callback, // **
* .usb_mode = USB_MODE_HOST,
* };
*
* ** "my_clear_stall_callback" calls "usbd_clear_stall_callback"
* passing the correct parameters.
*------------------------------------------------------------------------*/
uint8_t
usbd_clear_stall_callback(struct usb_xfer *xfer1,
struct usb_xfer *xfer2)
{
struct usb_device_request req;
if (xfer2 == NULL) {
/* looks like we are tearing down */
DPRINTF("NULL input parameter\n");
return (0);
}
USB_XFER_LOCK_ASSERT(xfer1, MA_OWNED);
USB_XFER_LOCK_ASSERT(xfer2, MA_OWNED);
switch (USB_GET_STATE(xfer1)) {
case USB_ST_SETUP:
/*
* pre-clear the data toggle to DATA0 ("umass.c" and
* "ata-usb.c" depends on this)
*/
usbd_clear_data_toggle(xfer2->xroot->udev, xfer2->endpoint);
/* setup a clear-stall packet */
req.bmRequestType = UT_WRITE_ENDPOINT;
req.bRequest = UR_CLEAR_FEATURE;
USETW(req.wValue, UF_ENDPOINT_HALT);
req.wIndex[0] = xfer2->endpoint->edesc->bEndpointAddress;
req.wIndex[1] = 0;
USETW(req.wLength, 0);
/*
* "usbd_transfer_setup_sub()" will ensure that
* we have sufficient room in the buffer for
* the request structure!
*/
/* copy in the transfer */
usbd_copy_in(xfer1->frbuffers, 0, &req, sizeof(req));
/* set length */
xfer1->frlengths[0] = sizeof(req);
xfer1->nframes = 1;
usbd_transfer_submit(xfer1);
return (0);
case USB_ST_TRANSFERRED:
break;
default: /* Error */
if (xfer1->error == USB_ERR_CANCELLED) {
return (0);
}
break;
}
return (1); /* Clear Stall Finished */
}
/*------------------------------------------------------------------------*
* usbd_transfer_poll
*
* The following function gets called from the USB keyboard driver and
* UMASS when the system has paniced.
*
* NOTE: It is currently not possible to resume normal operation on
* the USB controller which has been polled, due to clearing of the
* "up_dsleep" and "up_msleep" flags.
*------------------------------------------------------------------------*/
void
usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max)
{
struct usb_xfer *xfer;
struct usb_xfer_root *xroot;
struct usb_device *udev;
struct usb_proc_msg *pm;
uint16_t n;
uint16_t drop_bus;
uint16_t drop_xfer;
for (n = 0; n != max; n++) {
/* Extra checks to avoid panic */
xfer = ppxfer[n];
if (xfer == NULL)
continue; /* no USB transfer */
xroot = xfer->xroot;
if (xroot == NULL)
continue; /* no USB root */
udev = xroot->udev;
if (udev == NULL)
continue; /* no USB device */
if (udev->bus == NULL)
continue; /* no BUS structure */
if (udev->bus->methods == NULL)
continue; /* no BUS methods */
if (udev->bus->methods->xfer_poll == NULL)
continue; /* no poll method */
/* make sure that the BUS mutex is not locked */
drop_bus = 0;
while (mtx_owned(&xroot->udev->bus->bus_mtx) && !SCHEDULER_STOPPED()) {
mtx_unlock(&xroot->udev->bus->bus_mtx);
drop_bus++;
}
/* make sure that the transfer mutex is not locked */
drop_xfer = 0;
while (mtx_owned(xroot->xfer_mtx) && !SCHEDULER_STOPPED()) {
mtx_unlock(xroot->xfer_mtx);
drop_xfer++;
}
/* Make sure cv_signal() and cv_broadcast() is not called */
udev->bus->control_xfer_proc.up_msleep = 0;
udev->bus->explore_proc.up_msleep = 0;
udev->bus->giant_callback_proc.up_msleep = 0;
udev->bus->non_giant_callback_proc.up_msleep = 0;
/* poll USB hardware */
(udev->bus->methods->xfer_poll) (udev->bus);
USB_BUS_LOCK(xroot->bus);
/* check for clear stall */
if (udev->ctrl_xfer[1] != NULL) {
/* poll clear stall start */
pm = &udev->cs_msg[0].hdr;
(pm->pm_callback) (pm);
/* poll clear stall done thread */
pm = &udev->ctrl_xfer[1]->
xroot->done_m[0].hdr;
(pm->pm_callback) (pm);
}
/* poll done thread */
pm = &xroot->done_m[0].hdr;
(pm->pm_callback) (pm);
USB_BUS_UNLOCK(xroot->bus);
/* restore transfer mutex */
while (drop_xfer--)
mtx_lock(xroot->xfer_mtx);
/* restore BUS mutex */
while (drop_bus--)
mtx_lock(&xroot->udev->bus->bus_mtx);
}
}
static void
usbd_get_std_packet_size(struct usb_std_packet_size *ptr,
uint8_t type, enum usb_dev_speed speed)
{
static const uint16_t intr_range_max[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 8,
[USB_SPEED_FULL] = 64,
[USB_SPEED_HIGH] = 1024,
[USB_SPEED_VARIABLE] = 1024,
[USB_SPEED_SUPER] = 1024,
};
static const uint16_t isoc_range_max[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 0, /* invalid */
[USB_SPEED_FULL] = 1023,
[USB_SPEED_HIGH] = 1024,
[USB_SPEED_VARIABLE] = 3584,
[USB_SPEED_SUPER] = 1024,
};
static const uint16_t control_min[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 8,
[USB_SPEED_FULL] = 8,
[USB_SPEED_HIGH] = 64,
[USB_SPEED_VARIABLE] = 512,
[USB_SPEED_SUPER] = 512,
};
static const uint16_t bulk_min[USB_SPEED_MAX] = {
[USB_SPEED_LOW] = 8,
[USB_SPEED_FULL] = 8,
[USB_SPEED_HIGH] = 512,
[USB_SPEED_VARIABLE] = 512,
[USB_SPEED_SUPER] = 1024,
};
uint16_t temp;
memset(ptr, 0, sizeof(*ptr));
switch (type) {
case UE_INTERRUPT:
ptr->range.max = intr_range_max[speed];
break;
case UE_ISOCHRONOUS:
ptr->range.max = isoc_range_max[speed];
break;
default:
if (type == UE_BULK)
temp = bulk_min[speed];
else /* UE_CONTROL */
temp = control_min[speed];
/* default is fixed */
ptr->fixed[0] = temp;
ptr->fixed[1] = temp;
ptr->fixed[2] = temp;
ptr->fixed[3] = temp;
if (speed == USB_SPEED_FULL) {
/* multiple sizes */
ptr->fixed[1] = 16;
ptr->fixed[2] = 32;
ptr->fixed[3] = 64;
}
if ((speed == USB_SPEED_VARIABLE) &&
(type == UE_BULK)) {
/* multiple sizes */
ptr->fixed[2] = 1024;
ptr->fixed[3] = 1536;
}
break;
}
}
void *
usbd_xfer_softc(struct usb_xfer *xfer)
{
return (xfer->priv_sc);
}
void *
usbd_xfer_get_priv(struct usb_xfer *xfer)
{
return (xfer->priv_fifo);
}
void
usbd_xfer_set_priv(struct usb_xfer *xfer, void *ptr)
{
xfer->priv_fifo = ptr;
}
uint8_t
usbd_xfer_state(struct usb_xfer *xfer)
{
return (xfer->usb_state);
}
void
usbd_xfer_set_flag(struct usb_xfer *xfer, int flag)
{
switch (flag) {
case USB_FORCE_SHORT_XFER:
xfer->flags.force_short_xfer = 1;
break;
case USB_SHORT_XFER_OK:
xfer->flags.short_xfer_ok = 1;
break;
case USB_MULTI_SHORT_OK:
xfer->flags.short_frames_ok = 1;
break;
case USB_MANUAL_STATUS:
xfer->flags.manual_status = 1;
break;
}
}
void
usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag)
{
switch (flag) {
case USB_FORCE_SHORT_XFER:
xfer->flags.force_short_xfer = 0;
break;
case USB_SHORT_XFER_OK:
xfer->flags.short_xfer_ok = 0;
break;
case USB_MULTI_SHORT_OK:
xfer->flags.short_frames_ok = 0;
break;
case USB_MANUAL_STATUS:
xfer->flags.manual_status = 0;
break;
}
}
/*
* The following function returns in milliseconds when the isochronous
* transfer was completed by the hardware. The returned value wraps
* around 65536 milliseconds.
*/
uint16_t
usbd_xfer_get_timestamp(struct usb_xfer *xfer)
{
return (xfer->isoc_time_complete);
}