| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/iwnfw/iwn6000g2b/@/dev/wi/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/iwnfw/iwn6000g2b/@/dev/wi/if_wireg.h |
/*-
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/wi/if_wireg.h 192468 2009-05-20 20:00:40Z sam $
*/
#define WI_DELAY 5
#define WI_TIMEOUT (500000/WI_DELAY) /* 500 ms */
#define WI_PORT0 (0 << 8)
#define WI_PORT1 (1 << 8)
#define WI_PORT2 (2 << 8)
#define WI_PORT3 (3 << 8)
#define WI_PORT4 (4 << 8)
#define WI_PORT5 (5 << 8)
#define WI_PCI_LMEMRES 0x10 /* PCI Memory (native PCI implementations) */
#define WI_PCI_LOCALRES 0x14 /* The PLX chip's local registers */
#define WI_PCI_MEMRES 0x18 /* The PCCard's attribute memory */
#define WI_PCI_IORES 0x1C /* The PCCard's I/O space */
#define WI_LOCAL_INTCSR 0x4c
#define WI_LOCAL_INTEN 0x40
#define WI_HFA384X_SWSUPPORT0_OFF 0x28
#define WI_PRISM2STA_MAGIC 0x4A2D
#define WI_PCICOR_OFF 0x26
#define WI_PCICOR_RESET 0x0080
/* Default port: 0 (only 0 exists on stations) */
#define WI_DEFAULT_PORT WI_PORT0
/* Default network name: ANY */
/*
* [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner,
* ANY is used in MS driver user interfaces, while "" is used over the
* wire..
*/
#define WI_DEFAULT_NETNAME ""
#define WI_DEFAULT_AP_DENSITY 1
#define WI_DEFAULT_RTS_THRESH 2347
#define WI_DEFAULT_DATALEN 2304
#define WI_DEFAULT_CREATE_IBSS 0
#define WI_DEFAULT_PM_ENABLED 0
#define WI_DEFAULT_MAX_SLEEP 100
#define WI_DEFAULT_ROAMING 1
#define WI_DEFAULT_AUTHTYPE 1
#ifdef __NetBSD__
#define OS_STRING_NAME "NetBSD"
#endif
#ifdef __FreeBSD__
#define OS_STRING_NAME "FreeBSD"
#endif
#ifdef __OpenBSD__
#define OS_STRING_NAME "OpenBSD"
#endif
#define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node"
#define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS"
#define WI_BUS_PCCARD 0 /* pccard device */
#define WI_BUS_PCI_PLX 1 /* PCI card w/ PLX PCI/PCMICA bridge */
#define WI_BUS_PCI_NATIVE 2 /* native PCI device (Prism 2.5) */
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
#define CSR_READ_2(sc, reg) \
bus_space_read_2((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
#define CSR_READ_1(sc, reg) \
bus_space_read_1((sc)->wi_btag, (sc)->wi_bhandle, \
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
#define CSM_WRITE_1(sc, off, val) \
bus_space_write_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off, val)
#define CSM_READ_1(sc, off) \
bus_space_read_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off)
#define CSR_WRITE_STREAM_2(sc, reg, val) \
bus_space_write_stream_2(sc->wi_btag, sc->wi_bhandle, \
(sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), val)
#define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \
bus_space_write_multi_stream_2(sc->wi_btag, sc->wi_bhandle, \
(sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), val, count)
#define CSR_READ_STREAM_2(sc, reg) \
bus_space_read_stream_2(sc->wi_btag, sc->wi_bhandle, \
(sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)))
#define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \
bus_space_read_multi_stream_2(sc->wi_btag, sc->wi_bhandle, \
(sc->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg) * 2 : (reg)), buf, count)
/*
* The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent
* calls 'Hermes.' In typical fashion, getting documentation about this
* controller is about as easy as squeezing blood from a stone. Here
* is more or less what I know:
*
* - The Hermes controller is firmware driven, and the host interacts
* with the Hermes via a firmware interface, which can change.
*
* - The Hermes is described in a document called: "Hermes Firmware
* WaveLAN/IEEE Station Functions," document #010245, which of course
* Lucent will not release without an NDA.
*
* - Lucent has created a library called HCF (Hardware Control Functions)
* though which it wants developers to interact with the card. The HCF
* is needlessly complex, ill conceived and badly documented. Actually,
* the comments in the HCP code itself aren't bad, but the publically
* available manual that comes with it is awful, probably due largely to
* the fact that it has been emasculated in order to hide information
* that Lucent wants to keep proprietary. The purpose of the HCF seems
* to be to insulate the driver programmer from the Hermes itself so that
* Lucent has an excuse not to release programming in for it.
*
* - Lucent only makes available documentation and code for 'HCF Light'
* which is a stripped down version of HCF with certain features not
* implemented, most notably support for 802.11 frames.
*
* - The HCF code which I have seen blows goats. Whoever decided to
* use a 132 column format should be shot.
*
* Rather than actually use the Lucent HCF library, I have stripped all
* the useful information from it and used it to create a driver in the
* usual BSD form. Note: I don't want to hear anybody whining about the
* fact that the Lucent code is GPLed and mine isn't. I did not actually
* put any of Lucent's code in this driver: I only used it as a reference
* to obtain information about the underlying hardware. The Hermes
* programming interface is not GPLed, so bite me.
*/
/*
* Size of Hermes & Prism2 I/O space.
*/
#define WI_IOSIZ 0x40
/*
* Hermes & Prism2 register definitions
*/
/* Hermes command/status registers. */
#define WI_COMMAND 0x00
#define WI_PARAM0 0x02
#define WI_PARAM1 0x04
#define WI_PARAM2 0x06
#define WI_STATUS 0x08
#define WI_RESP0 0x0A
#define WI_RESP1 0x0C
#define WI_RESP2 0x0E
/* Command register values. */
#define WI_CMD_BUSY 0x8000 /* busy bit */
#define WI_CMD_INI 0x0000 /* initialize */
#define WI_CMD_ENABLE 0x0001 /* enable */
#define WI_CMD_DISABLE 0x0002 /* disable */
#define WI_CMD_DIAG 0x0003
#define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */
#define WI_CMD_TX 0x000B /* transmit */
#define WI_CMD_NOTIFY 0x0010
#define WI_CMD_INQUIRE 0x0011
#define WI_CMD_ACCESS 0x0021
#define WI_CMD_ACCESS_WRITE 0x0121
#define WI_CMD_PROGRAM 0x0022
#define WI_CMD_READEE 0x0030 /* symbol only */
#define WI_CMD_READMIF 0x0030 /* prism2 */
#define WI_CMD_WRITEMIF 0x0031 /* prism2 */
#define WI_CMD_DEBUG 0x0038 /* Various test commands */
#define WI_CMD_CODE_MASK 0x003F
/*
* Various cmd test stuff.
*/
#define WI_TEST_MONITOR 0x0B
#define WI_TEST_STOP 0x0F
#define WI_TEST_CFG_BITS 0x15
#define WI_TEST_CFG_BIT_ALC 0x08
/*
* Reclaim qualifier bit, applicable to the
* TX and INQUIRE commands.
*/
#define WI_RECLAIM 0x0100 /* reclaim NIC memory */
/*
* ACCESS command qualifier bits.
*/
#define WI_ACCESS_READ 0x0000
#define WI_ACCESS_WRITE 0x0100
/*
* PROGRAM command qualifier bits.
*/
#define WI_PROGRAM_DISABLE 0x0000
#define WI_PROGRAM_ENABLE_RAM 0x0100
#define WI_PROGRAM_ENABLE_NVRAM 0x0200
#define WI_PROGRAM_NVRAM 0x0300
/* Status register values */
#define WI_STAT_CMD_CODE 0x003F
#define WI_STAT_DIAG_ERR 0x0100
#define WI_STAT_INQ_ERR 0x0500
#define WI_STAT_CMD_RESULT 0x7F00
/* memory handle management registers */
#define WI_INFO_FID 0x10
#define WI_RX_FID 0x20
#define WI_ALLOC_FID 0x22
#define WI_TX_CMP_FID 0x24
/*
* Buffer Access Path (BAP) registers.
* These are I/O channels. I believe you can use each one for
* any desired purpose independently of the other. In general
* though, we use BAP1 for reading and writing LTV records and
* reading received data frames, and BAP0 for writing transmit
* frames. This is a convention though, not a rule.
*/
#define WI_SEL0 0x18
#define WI_SEL1 0x1A
#define WI_OFF0 0x1C
#define WI_OFF1 0x1E
#define WI_DATA0 0x36
#define WI_DATA1 0x38
#define WI_BAP0 WI_DATA0
#define WI_BAP1 WI_DATA1
#define WI_OFF_BUSY 0x8000
#define WI_OFF_ERR 0x4000
#define WI_OFF_DATAOFF 0x0FFF
/* Event registers */
#define WI_EVENT_STAT 0x30 /* Event status */
#define WI_INT_EN 0x32 /* Interrupt enable/disable */
#define WI_EVENT_ACK 0x34 /* Ack event */
/* Events */
#define WI_EV_TICK 0x8000 /* aux timer tick */
#define WI_EV_RES 0x4000 /* controller h/w error (time out) */
#define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */
#define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */
#define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */
#define WI_EV_INFO 0x0080 /* async info frame */
#define WI_EV_CMD 0x0010 /* command completed */
#define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */
#define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */
#define WI_EV_TX 0x0002 /* async xmit completed succesfully */
#define WI_EV_RX 0x0001 /* async rx completed */
/* Host software registers */
#define WI_SW0 0x28
#define WI_SW1 0x2A
#define WI_SW2 0x2C
#define WI_SW3 0x2E /* does not appear in Prism2 */
#define WI_CNTL 0x14
#define WI_CNTL_AUX_ENA 0xC000
#define WI_CNTL_AUX_ENA_STAT 0xC000
#define WI_CNTL_AUX_DIS_STAT 0x0000
#define WI_CNTL_AUX_ENA_CNTL 0x8000
#define WI_CNTL_AUX_DIS_CNTL 0x4000
#define WI_AUX_PAGE 0x3A
#define WI_AUX_OFFSET 0x3C
#define WI_AUX_DATA 0x3E
#define WI_AUX_PGSZ 128
#define WI_AUX_KEY0 0xfe01
#define WI_AUX_KEY1 0xdc23
#define WI_AUX_KEY2 0xba45
#define WI_COR 0x40 /* only for Symbol */
#define WI_COR_RESET 0x0080
#define WI_COR_IOMODE 0x0041
#define WI_HCR 0x42 /* only for Symbol */
#define WI_HCR_4WIRE 0x0010
#define WI_HCR_RUN 0x0007
#define WI_HCR_HOLD 0x000f
#define WI_HCR_EEHOLD 0x00ce
#define WI_COR_OFFSET 0x3e0 /* OK for PCI, default COR for Prism PC Card */
#define WI_COR_VALUE 0x41
/*
* One form of communication with the Hermes is with what Lucent calls
* LTV records, where LTV stands for Length, Type and Value. The length
* and type are 16 bits and are in native byte order. The value is in
* multiples of 16 bits and is in little endian byte order.
*/
struct wi_lt_hdr {
u_int16_t wi_len;
u_int16_t wi_type;
/* value is vary depends on resource id */
};
/*
* Download buffer location and length (0xFD01).
*/
struct wi_dnld_buf {
u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/
u_int16_t wi_buf_off; /* offset of idb */
u_int16_t wi_buf_len; /* len of idb */
};
/*
* Mem sizes (0xFD02).
*/
struct wi_memsz {
u_int16_t wi_mem_ram;
u_int16_t wi_mem_nvram;
};
/*
* NIC Identification (0xFD0B, 0xFD20)
*/
struct wi_ver {
u_int16_t wi_ver[4];
};
/* define card ident */
#define WI_NIC_LUCENT_ID 0x0001
#define WI_NIC_LUCENT_STR "Lucent Technologies, WaveLAN/IEEE"
#define WI_NIC_SONY_ID 0x0002
#define WI_NIC_SONY_STR "Sony WaveLAN/IEEE"
#define WI_NIC_LUCENT_EMB_ID 0x0005
#define WI_NIC_LUCENT_EMB_STR "Lucent Embedded WaveLAN/IEEE"
#define WI_NIC_EVB2_ID 0x8000
#define WI_NIC_EVB2_STR "RF:PRISM2 MAC:HFA3841"
#define WI_NIC_HWB3763_ID 0x8001
#define WI_NIC_HWB3763_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3763 rev.B"
#define WI_NIC_HWB3163_ID 0x8002
#define WI_NIC_HWB3163_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A"
#define WI_NIC_HWB3163B_ID 0x8003
#define WI_NIC_HWB3163B_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B"
#define WI_NIC_EVB3_ID 0x8004
#define WI_NIC_EVB3_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL"
#define WI_NIC_HWB1153_ID 0x8007
#define WI_NIC_HWB1153_STR "RF:PRISM1 MAC:HFA3841 CARD:HWB1153"
#define WI_NIC_P2_SST_ID 0x8008 /* Prism2 with SST flush */
#define WI_NIC_P2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash"
#define WI_NIC_EVB2_SST_ID 0x8009
#define WI_NIC_EVB2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash"
#define WI_NIC_3842_EVA_ID 0x800A /* 3842 Evaluation Board */
#define WI_NIC_3842_EVA_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL"
#define WI_NIC_3842_PCMCIA_AMD_ID 0x800B /* Prism2.5 PCMCIA */
#define WI_NIC_3842_PCMCIA_SST_ID 0x800C
#define WI_NIC_3842_PCMCIA_ATL_ID 0x800D
#define WI_NIC_3842_PCMCIA_ATS_ID 0x800E
#define WI_NIC_3842_PCMCIA_STR "RF:PRISM2.5 MAC:ISL3873"
#define WI_NIC_3842_MINI_AMD_ID 0x8012 /* Prism2.5 Mini-PCI */
#define WI_NIC_3842_MINI_SST_ID 0x8013
#define WI_NIC_3842_MINI_ATL_ID 0x8014
#define WI_NIC_3842_MINI_ATS_ID 0x8015
#define WI_NIC_3842_MINI_STR "RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)"
#define WI_NIC_3842_PCI_AMD_ID 0x8016 /* Prism2.5 PCI-bridge */
#define WI_NIC_3842_PCI_SST_ID 0x8017
#define WI_NIC_3842_PCI_ATL_ID 0x8018
#define WI_NIC_3842_PCI_ATS_ID 0x8019
#define WI_NIC_3842_PCI_STR "RF:PRISM2.5 MAC:ISL3874A(PCI-bridge)"
#define WI_NIC_P3_PCMCIA_AMD_ID 0x801A /* Prism3 PCMCIA */
#define WI_NIC_P3_PCMCIA_SST_ID 0x801B
#define WI_NIC_P3_PCMCIA_ATL_ID 0x801C
#define WI_NIC_P3_PCMCIA_ATS_ID 0x801D
#define WI_NIC_P3_PCMCIA_STR "RF:PRISM3(PCMCIA)"
#define WI_NIC_P3_USB_AMD_ID 0x801E
#define WI_NIC_P3_USB_SST_ID 0x801F
#define WI_NIC_P3_USB_ATL_ID 0x8020
#define WI_NIC_P3_MINI_AMD_ID 0x8021 /* Prism3 Mini-PCI */
#define WI_NIC_P3_MINI_SST_ID 0x8022
#define WI_NIC_P3_MINI_ATL_ID 0x8023
#define WI_NIC_P3_MINI_ATS_ID 0x8024
#define WI_NIC_P3_MINI_STR "RF:PRISM3(Mini-PCI)"
/*
* List of intended regulatory domains (0xFD11).
*/
struct wi_ltv_domains {
u_int16_t wi_len;
u_int16_t wi_type;
u_int16_t wi_num_dom;
u_int8_t wi_domains[10];
};
/*
* CIS struct (0xFD13).
*/
struct wi_cis {
u_int16_t wi_cis[240];
};
/*
* Communications quality (0xFD43).
*/
struct wi_commqual {
u_int16_t wi_coms_qual;
u_int16_t wi_sig_lvl;
u_int16_t wi_noise_lvl;
};
/*
* Actual system scale thresholds (0xFC06, 0xFD46).
*/
struct wi_scalethresh {
u_int16_t wi_energy_detect;
u_int16_t wi_carrier_detect;
u_int16_t wi_defer;
u_int16_t wi_cell_search;
u_int16_t wi_out_of_range;
u_int16_t wi_delta_snr;
};
/*
* PCF info struct (0xFD87).
*/
struct wi_pcf {
u_int16_t wi_medium_occupancy_limit;
u_int16_t wi_cfp_period;
u_int16_t wi_cfp_max_duration;
};
/*
* Connection control characteristics. (0xFC00)
* 0 == IBSS (802.11 compliant mode) (Only PRISM2)
* 1 == Basic Service Set (BSS)
* 2 == Wireless Distribudion System (WDS)
* 3 == Pseudo IBSS
* (Only PRISM2; not 802.11 compliant mode, testing use only)
* 6 == HOST AP (Only PRISM2)
*/
#define WI_PORTTYPE_IBSS 0x0
#define WI_PORTTYPE_BSS 0x1
#define WI_PORTTYPE_WDS 0x2
#define WI_PORTTYPE_ADHOC 0x3
#define WI_PORTTYPE_APSILENT 0x5
#define WI_PORTTYPE_HOSTAP 0x6
/*
* Mac addresses. (0xFC01, 0xFC08)
*/
struct wi_macaddr {
u_int8_t wi_mac_addr[6];
};
/*
* Station set identification (SSID). (0xFC02, 0xFC04)
*/
struct wi_ssid {
u_int16_t wi_len;
u_int8_t wi_ssid[32];
};
/*
* Set our station name. (0xFC0E)
*/
struct wi_nodename {
u_int16_t wi_nodelen;
u_int8_t wi_nodename[32];
};
/*
* Multicast addresses to be put in filter. We're
* allowed up to 16 addresses in the filter. (0xFC80)
*/
struct wi_mcast {
struct ether_addr wi_mcast[16];
};
/*
* Join request. (0xFCE2)
*/
struct wi_joinreq {
struct ether_addr wi_bssid;
u_int16_t wi_chan;
};
/*
* supported rates. (0xFCB4)
*/
#define WI_SUPPRATES_1M 0x0001
#define WI_SUPPRATES_2M 0x0002
#define WI_SUPPRATES_5M 0x0004
#define WI_SUPPRATES_11M 0x0008
#define WI_RATES_BITS "\20\0011M\0022M\0035.5M\00411M"
/*
* Information frame types.
*/
#define WI_INFO_NOTIFY 0xF000 /* Handover address */
#define WI_INFO_COUNTERS 0xF100 /* Statistics counters */
#define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */
#define WI_INFO_HOST_SCAN_RESULTS 0xF104 /* Scan results */
#define WI_INFO_LINK_STAT 0xF200 /* Link status */
#define WI_INFO_LINK_STAT_CONNECTED 1
#define WI_INFO_LINK_STAT_DISCONNECTED 2
#define WI_INFO_LINK_STAT_AP_CHG 3 /* AP Change */
#define WI_INFO_LINK_STAT_AP_OOR 4 /* AP Out Of Range */
#define WI_INFO_LINK_STAT_AP_INR 5 /* AP In Range */
#define WI_INFO_LINK_STAT_ASSOC_FAILED 6
#define WI_INFO_ASSOC_STAT 0xF201 /* Association status */
#define WI_INFO_AUTH_REQUEST 0xF202 /* Authentication Request (AP) */
#define WI_INFO_POWERSAVE_COUNT 0xF203 /* PowerSave User Count (AP) */
struct wi_assoc {
u_int16_t wi_assoc_stat; /* Association Status */
#define ASSOC 1
#define REASSOC 2
#define DISASSOC 3
#define ASSOCFAIL 4
#define AUTHFAIL 5
u_int8_t wi_assoc_sta[6]; /* Station Address */
u_int8_t wi_assoc_osta[6]; /* OLD Station Address */
u_int16_t wi_assoc_reason; /* Reason */
u_int16_t wi_assoc_reserve; /* Reserved */
};
/*
* Scan Results of Prism2 chip
*/
struct wi_scan_header {
u_int16_t wi_reserve; /* future use */
u_int16_t wi_reason; /* The reason this scan was initiated
1: Host initiated
2: Firmware initiated
3: Inquiry request from host */
};
struct wi_scan_data_p2 {
u_int16_t wi_chid; /* BSS Channel ID from Probe Res.(PR)*/
u_int16_t wi_noise; /* Average Noise Level of the PR */
u_int16_t wi_signal; /* Signal Level on the PR */
u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */
u_int16_t wi_interval; /* BSS beacon interval */
u_int16_t wi_capinfo; /* BSS Capability Information
IEEE Std 802.11(1997) ,see 7.3.1.4 */
u_int16_t wi_namelen; /* Length of SSID strings */
u_int8_t wi_name[32]; /* SSID strings */
u_int16_t wi_suprate[5]; /* Supported Rates element from the PR
IEEE Std 802.11(1997) ,see 7.3.2.2 */
u_int16_t wi_rate; /* Data rate of the PR */
#define WI_APRATE_1 0x0A /* 1 Mbps */
#define WI_APRATE_2 0x14 /* 2 Mbps */
#define WI_APRATE_5 0x37 /* 5.5 Mbps */
#define WI_APRATE_11 0x6E /* 11 Mbps */
};
/*
* Scan Results of Lucent chip
*/
struct wi_scan_data {
u_int16_t wi_chid; /* BSS Channel ID from PR */
u_int16_t wi_noise; /* Average Noise Level of the PR */
u_int16_t wi_signal; /* Signal Level on the PR */
u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */
u_int16_t wi_interval; /* BSS beacon interval */
u_int16_t wi_capinfo; /* BSS Capability Information
IEEE Std 802.11(1997) ,see 7.3.1.4 */
u_int16_t wi_namelen; /* Length of SSID strings */
u_int8_t wi_name[32]; /* SSID strings */
};
/*
* transmit/receive frame structure
*/
struct wi_frame {
u_int16_t wi_status; /* 0x00 */
u_int16_t wi_rx_tstamp1; /* 0x02 */
u_int16_t wi_rx_tstamp0; /* 0x04 */
u_int8_t wi_rx_silence; /* 0x06 */
u_int8_t wi_rx_signal; /* 0x07 */
u_int8_t wi_rx_rate; /* 0x08 */
u_int8_t wi_rx_flow; /* 0x09 */
u_int8_t wi_tx_rtry; /* 0x0a */ /* Prism2 AP Only */
u_int8_t wi_tx_rate; /* 0x0b */ /* Prism2 AP Only */
u_int16_t wi_tx_ctl; /* 0x0c */
struct ieee80211_frame_addr4 wi_whdr; /* 0x0e */
u_int16_t wi_dat_len; /* 0x2c */
struct ether_header wi_ehdr; /* 0x2e */
} __attribute__((__packed__));
/* Tx Status Field */
#define WI_TXSTAT_RET_ERR 0x0001
#define WI_TXSTAT_AGED_ERR 0x0002
#define WI_TXSTAT_DISCONNECT 0x0004
#define WI_TXSTAT_FORM_ERR 0x0008
/* Rx Status Field */
#define WI_STAT_BADCRC 0x0001
#define WI_STAT_UNDECRYPTABLE 0x0002
#define WI_STAT_ERRSTAT 0x0003
#define WI_STAT_MAC_PORT 0x0700
#define WI_STAT_PCF 0x1000
#define WI_RXSTAT_MSG_TYPE 0xE000
#define WI_STAT_1042 0x2000 /* RFC1042 encoded */
#define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */
#define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */
#define WI_STAT_MGMT 0x8000 /* 802.11b management frames */
#define WI_ENC_TX_E_II 0x0E
#define WI_ENC_TX_1042 0x00
#define WI_ENC_TX_TUNNEL 0xF8
/* TxControl Field (enhanced) */
#define WI_TXCNTL_TX_OK 0x0002
#define WI_TXCNTL_TX_EX 0x0004
#define WI_TXCNTL_STRUCT_TYPE 0x0018
#define WI_ENC_TX_802_3 0x00
#define WI_ENC_TX_802_11 0x08
#define WI_TXCNTL_ALTRTRY 0x0020
#define WI_TXCNTL_NOCRYPT 0x0080
/*
* HFA3861/3863 (BBP) Control Registers
*/
#define WI_HFA386X_CR_A_D_TEST_MODES2 0x1A
#define WI_HFA386X_CR_MANUAL_TX_POWER 0x3E
#ifdef IEEE80211_RADIOTAP_F_CFP
/*
* Radio capture format for Prism.
*/
#define WI_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DB_ANTNOISE))
struct wi_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
u_int64_t wr_tsf;
u_int8_t wr_flags;
u_int8_t wr_rate;
u_int16_t wr_chan_freq;
u_int16_t wr_chan_flags;
u_int8_t wr_antsignal;
u_int8_t wr_antnoise;
};
#define WI_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
struct wi_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
u_int8_t wt_flags;
u_int8_t wt_rate;
u_int16_t wt_chan_freq;
u_int16_t wt_chan_flags;
};
#endif /* IEEE80211_RADIOTAP_F_CFP */