| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ixgb/@/contrib/dev/acpica/executer/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ixgb/@/contrib/dev/acpica/executer/exoparg1.c |
/******************************************************************************
*
* Module Name: exoparg1 - AML execution - opcodes with 1 argument
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __EXOPARG1_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acparser.h>
#include <contrib/dev/acpica/include/acdispat.h>
#include <contrib/dev/acpica/include/acinterp.h>
#include <contrib/dev/acpica/include/amlcode.h>
#include <contrib/dev/acpica/include/acnamesp.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exoparg1")
/*!
* Naming convention for AML interpreter execution routines.
*
* The routines that begin execution of AML opcodes are named with a common
* convention based upon the number of arguments, the number of target operands,
* and whether or not a value is returned:
*
* AcpiExOpcode_xA_yT_zR
*
* Where:
*
* xA - ARGUMENTS: The number of arguments (input operands) that are
* required for this opcode type (0 through 6 args).
* yT - TARGETS: The number of targets (output operands) that are required
* for this opcode type (0, 1, or 2 targets).
* zR - RETURN VALUE: Indicates whether this opcode type returns a value
* as the function return (0 or 1).
*
* The AcpiExOpcode* functions are called via the Dispatcher component with
* fully resolved operands.
!*/
/*******************************************************************************
*
* FUNCTION: AcpiExOpcode_0A_0T_1R
*
* PARAMETERS: WalkState - Current state (contains AML opcode)
*
* RETURN: Status
*
* DESCRIPTION: Execute operator with no operands, one return value
*
******************************************************************************/
ACPI_STATUS
AcpiExOpcode_0A_0T_1R (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT *ReturnDesc = NULL;
ACPI_FUNCTION_TRACE_STR (ExOpcode_0A_0T_1R,
AcpiPsGetOpcodeName (WalkState->Opcode));
/* Examine the AML opcode */
switch (WalkState->Opcode)
{
case AML_TIMER_OP: /* Timer () */
/* Create a return object of type Integer */
ReturnDesc = AcpiUtCreateIntegerObject (AcpiOsGetTimer ());
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
break;
default: /* Unknown opcode */
ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
WalkState->Opcode));
Status = AE_AML_BAD_OPCODE;
break;
}
Cleanup:
/* Delete return object on error */
if ((ACPI_FAILURE (Status)) || WalkState->ResultObj)
{
AcpiUtRemoveReference (ReturnDesc);
WalkState->ResultObj = NULL;
}
else
{
/* Save the return value */
WalkState->ResultObj = ReturnDesc;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExOpcode_1A_0T_0R
*
* PARAMETERS: WalkState - Current state (contains AML opcode)
*
* RETURN: Status
*
* DESCRIPTION: Execute Type 1 monadic operator with numeric operand on
* object stack
*
******************************************************************************/
ACPI_STATUS
AcpiExOpcode_1A_0T_0R (
ACPI_WALK_STATE *WalkState)
{
ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
ACPI_STATUS Status = AE_OK;
ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_0R,
AcpiPsGetOpcodeName (WalkState->Opcode));
/* Examine the AML opcode */
switch (WalkState->Opcode)
{
case AML_RELEASE_OP: /* Release (MutexObject) */
Status = AcpiExReleaseMutex (Operand[0], WalkState);
break;
case AML_RESET_OP: /* Reset (EventObject) */
Status = AcpiExSystemResetEvent (Operand[0]);
break;
case AML_SIGNAL_OP: /* Signal (EventObject) */
Status = AcpiExSystemSignalEvent (Operand[0]);
break;
case AML_SLEEP_OP: /* Sleep (MsecTime) */
Status = AcpiExSystemDoSleep (Operand[0]->Integer.Value);
break;
case AML_STALL_OP: /* Stall (UsecTime) */
Status = AcpiExSystemDoStall ((UINT32) Operand[0]->Integer.Value);
break;
case AML_UNLOAD_OP: /* Unload (Handle) */
Status = AcpiExUnloadTable (Operand[0]);
break;
default: /* Unknown opcode */
ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
WalkState->Opcode));
Status = AE_AML_BAD_OPCODE;
break;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExOpcode_1A_1T_0R
*
* PARAMETERS: WalkState - Current state (contains AML opcode)
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with one argument, one target, and no
* return value.
*
******************************************************************************/
ACPI_STATUS
AcpiExOpcode_1A_1T_0R (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_0R,
AcpiPsGetOpcodeName (WalkState->Opcode));
/* Examine the AML opcode */
switch (WalkState->Opcode)
{
case AML_LOAD_OP:
Status = AcpiExLoadOp (Operand[0], Operand[1], WalkState);
break;
default: /* Unknown opcode */
ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
WalkState->Opcode));
Status = AE_AML_BAD_OPCODE;
goto Cleanup;
}
Cleanup:
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExOpcode_1A_1T_1R
*
* PARAMETERS: WalkState - Current state (contains AML opcode)
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with one argument, one target, and a
* return value.
*
******************************************************************************/
ACPI_STATUS
AcpiExOpcode_1A_1T_1R (
ACPI_WALK_STATE *WalkState)
{
ACPI_STATUS Status = AE_OK;
ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
ACPI_OPERAND_OBJECT *ReturnDesc = NULL;
ACPI_OPERAND_OBJECT *ReturnDesc2 = NULL;
UINT32 Temp32;
UINT32 i;
UINT64 PowerOfTen;
UINT64 Digit;
ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_1T_1R,
AcpiPsGetOpcodeName (WalkState->Opcode));
/* Examine the AML opcode */
switch (WalkState->Opcode)
{
case AML_BIT_NOT_OP:
case AML_FIND_SET_LEFT_BIT_OP:
case AML_FIND_SET_RIGHT_BIT_OP:
case AML_FROM_BCD_OP:
case AML_TO_BCD_OP:
case AML_COND_REF_OF_OP:
/* Create a return object of type Integer for these opcodes */
ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
switch (WalkState->Opcode)
{
case AML_BIT_NOT_OP: /* Not (Operand, Result) */
ReturnDesc->Integer.Value = ~Operand[0]->Integer.Value;
break;
case AML_FIND_SET_LEFT_BIT_OP: /* FindSetLeftBit (Operand, Result) */
ReturnDesc->Integer.Value = Operand[0]->Integer.Value;
/*
* Acpi specification describes Integer type as a little
* endian unsigned value, so this boundary condition is valid.
*/
for (Temp32 = 0; ReturnDesc->Integer.Value &&
Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32)
{
ReturnDesc->Integer.Value >>= 1;
}
ReturnDesc->Integer.Value = Temp32;
break;
case AML_FIND_SET_RIGHT_BIT_OP: /* FindSetRightBit (Operand, Result) */
ReturnDesc->Integer.Value = Operand[0]->Integer.Value;
/*
* The Acpi specification describes Integer type as a little
* endian unsigned value, so this boundary condition is valid.
*/
for (Temp32 = 0; ReturnDesc->Integer.Value &&
Temp32 < ACPI_INTEGER_BIT_SIZE; ++Temp32)
{
ReturnDesc->Integer.Value <<= 1;
}
/* Since the bit position is one-based, subtract from 33 (65) */
ReturnDesc->Integer.Value =
Temp32 == 0 ? 0 : (ACPI_INTEGER_BIT_SIZE + 1) - Temp32;
break;
case AML_FROM_BCD_OP: /* FromBcd (BCDValue, Result) */
/*
* The 64-bit ACPI integer can hold 16 4-bit BCD characters
* (if table is 32-bit, integer can hold 8 BCD characters)
* Convert each 4-bit BCD value
*/
PowerOfTen = 1;
ReturnDesc->Integer.Value = 0;
Digit = Operand[0]->Integer.Value;
/* Convert each BCD digit (each is one nybble wide) */
for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++)
{
/* Get the least significant 4-bit BCD digit */
Temp32 = ((UINT32) Digit) & 0xF;
/* Check the range of the digit */
if (Temp32 > 9)
{
ACPI_ERROR ((AE_INFO,
"BCD digit too large (not decimal): 0x%X",
Temp32));
Status = AE_AML_NUMERIC_OVERFLOW;
goto Cleanup;
}
/* Sum the digit into the result with the current power of 10 */
ReturnDesc->Integer.Value +=
(((UINT64) Temp32) * PowerOfTen);
/* Shift to next BCD digit */
Digit >>= 4;
/* Next power of 10 */
PowerOfTen *= 10;
}
break;
case AML_TO_BCD_OP: /* ToBcd (Operand, Result) */
ReturnDesc->Integer.Value = 0;
Digit = Operand[0]->Integer.Value;
/* Each BCD digit is one nybble wide */
for (i = 0; (i < AcpiGbl_IntegerNybbleWidth) && (Digit > 0); i++)
{
(void) AcpiUtShortDivide (Digit, 10, &Digit, &Temp32);
/*
* Insert the BCD digit that resides in the
* remainder from above
*/
ReturnDesc->Integer.Value |=
(((UINT64) Temp32) << ACPI_MUL_4 (i));
}
/* Overflow if there is any data left in Digit */
if (Digit > 0)
{
ACPI_ERROR ((AE_INFO,
"Integer too large to convert to BCD: 0x%8.8X%8.8X",
ACPI_FORMAT_UINT64 (Operand[0]->Integer.Value)));
Status = AE_AML_NUMERIC_OVERFLOW;
goto Cleanup;
}
break;
case AML_COND_REF_OF_OP: /* CondRefOf (SourceObject, Result) */
/*
* This op is a little strange because the internal return value is
* different than the return value stored in the result descriptor
* (There are really two return values)
*/
if ((ACPI_NAMESPACE_NODE *) Operand[0] == AcpiGbl_RootNode)
{
/*
* This means that the object does not exist in the namespace,
* return FALSE
*/
ReturnDesc->Integer.Value = 0;
goto Cleanup;
}
/* Get the object reference, store it, and remove our reference */
Status = AcpiExGetObjectReference (Operand[0],
&ReturnDesc2, WalkState);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
Status = AcpiExStore (ReturnDesc2, Operand[1], WalkState);
AcpiUtRemoveReference (ReturnDesc2);
/* The object exists in the namespace, return TRUE */
ReturnDesc->Integer.Value = ACPI_UINT64_MAX;
goto Cleanup;
default:
/* No other opcodes get here */
break;
}
break;
case AML_STORE_OP: /* Store (Source, Target) */
/*
* A store operand is typically a number, string, buffer or lvalue
* Be careful about deleting the source object,
* since the object itself may have been stored.
*/
Status = AcpiExStore (Operand[0], Operand[1], WalkState);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* It is possible that the Store already produced a return object */
if (!WalkState->ResultObj)
{
/*
* Normally, we would remove a reference on the Operand[0]
* parameter; But since it is being used as the internal return
* object (meaning we would normally increment it), the two
* cancel out, and we simply don't do anything.
*/
WalkState->ResultObj = Operand[0];
WalkState->Operands[0] = NULL; /* Prevent deletion */
}
return_ACPI_STATUS (Status);
/*
* ACPI 2.0 Opcodes
*/
case AML_COPY_OP: /* Copy (Source, Target) */
Status = AcpiUtCopyIobjectToIobject (Operand[0], &ReturnDesc,
WalkState);
break;
case AML_TO_DECSTRING_OP: /* ToDecimalString (Data, Result) */
Status = AcpiExConvertToString (Operand[0], &ReturnDesc,
ACPI_EXPLICIT_CONVERT_DECIMAL);
if (ReturnDesc == Operand[0])
{
/* No conversion performed, add ref to handle return value */
AcpiUtAddReference (ReturnDesc);
}
break;
case AML_TO_HEXSTRING_OP: /* ToHexString (Data, Result) */
Status = AcpiExConvertToString (Operand[0], &ReturnDesc,
ACPI_EXPLICIT_CONVERT_HEX);
if (ReturnDesc == Operand[0])
{
/* No conversion performed, add ref to handle return value */
AcpiUtAddReference (ReturnDesc);
}
break;
case AML_TO_BUFFER_OP: /* ToBuffer (Data, Result) */
Status = AcpiExConvertToBuffer (Operand[0], &ReturnDesc);
if (ReturnDesc == Operand[0])
{
/* No conversion performed, add ref to handle return value */
AcpiUtAddReference (ReturnDesc);
}
break;
case AML_TO_INTEGER_OP: /* ToInteger (Data, Result) */
Status = AcpiExConvertToInteger (Operand[0], &ReturnDesc,
ACPI_ANY_BASE);
if (ReturnDesc == Operand[0])
{
/* No conversion performed, add ref to handle return value */
AcpiUtAddReference (ReturnDesc);
}
break;
case AML_SHIFT_LEFT_BIT_OP: /* ShiftLeftBit (Source, BitNum) */
case AML_SHIFT_RIGHT_BIT_OP: /* ShiftRightBit (Source, BitNum) */
/* These are two obsolete opcodes */
ACPI_ERROR ((AE_INFO,
"%s is obsolete and not implemented",
AcpiPsGetOpcodeName (WalkState->Opcode)));
Status = AE_SUPPORT;
goto Cleanup;
default: /* Unknown opcode */
ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
WalkState->Opcode));
Status = AE_AML_BAD_OPCODE;
goto Cleanup;
}
if (ACPI_SUCCESS (Status))
{
/* Store the return value computed above into the target object */
Status = AcpiExStore (ReturnDesc, Operand[1], WalkState);
}
Cleanup:
/* Delete return object on error */
if (ACPI_FAILURE (Status))
{
AcpiUtRemoveReference (ReturnDesc);
}
/* Save return object on success */
else if (!WalkState->ResultObj)
{
WalkState->ResultObj = ReturnDesc;
}
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExOpcode_1A_0T_1R
*
* PARAMETERS: WalkState - Current state (contains AML opcode)
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with one argument, no target, and a return value
*
******************************************************************************/
ACPI_STATUS
AcpiExOpcode_1A_0T_1R (
ACPI_WALK_STATE *WalkState)
{
ACPI_OPERAND_OBJECT **Operand = &WalkState->Operands[0];
ACPI_OPERAND_OBJECT *TempDesc;
ACPI_OPERAND_OBJECT *ReturnDesc = NULL;
ACPI_STATUS Status = AE_OK;
UINT32 Type;
UINT64 Value;
ACPI_FUNCTION_TRACE_STR (ExOpcode_1A_0T_1R,
AcpiPsGetOpcodeName (WalkState->Opcode));
/* Examine the AML opcode */
switch (WalkState->Opcode)
{
case AML_LNOT_OP: /* LNot (Operand) */
ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) 0);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
/*
* Set result to ONES (TRUE) if Value == 0. Note:
* ReturnDesc->Integer.Value is initially == 0 (FALSE) from above.
*/
if (!Operand[0]->Integer.Value)
{
ReturnDesc->Integer.Value = ACPI_UINT64_MAX;
}
break;
case AML_DECREMENT_OP: /* Decrement (Operand) */
case AML_INCREMENT_OP: /* Increment (Operand) */
/*
* Create a new integer. Can't just get the base integer and
* increment it because it may be an Arg or Field.
*/
ReturnDesc = AcpiUtCreateInternalObject (ACPI_TYPE_INTEGER);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
/*
* Since we are expecting a Reference operand, it can be either a
* NS Node or an internal object.
*/
TempDesc = Operand[0];
if (ACPI_GET_DESCRIPTOR_TYPE (TempDesc) == ACPI_DESC_TYPE_OPERAND)
{
/* Internal reference object - prevent deletion */
AcpiUtAddReference (TempDesc);
}
/*
* Convert the Reference operand to an Integer (This removes a
* reference on the Operand[0] object)
*
* NOTE: We use LNOT_OP here in order to force resolution of the
* reference operand to an actual integer.
*/
Status = AcpiExResolveOperands (AML_LNOT_OP, &TempDesc, WalkState);
if (ACPI_FAILURE (Status))
{
ACPI_EXCEPTION ((AE_INFO, Status,
"While resolving operands for [%s]",
AcpiPsGetOpcodeName (WalkState->Opcode)));
goto Cleanup;
}
/*
* TempDesc is now guaranteed to be an Integer object --
* Perform the actual increment or decrement
*/
if (WalkState->Opcode == AML_INCREMENT_OP)
{
ReturnDesc->Integer.Value = TempDesc->Integer.Value +1;
}
else
{
ReturnDesc->Integer.Value = TempDesc->Integer.Value -1;
}
/* Finished with this Integer object */
AcpiUtRemoveReference (TempDesc);
/*
* Store the result back (indirectly) through the original
* Reference object
*/
Status = AcpiExStore (ReturnDesc, Operand[0], WalkState);
break;
case AML_TYPE_OP: /* ObjectType (SourceObject) */
/*
* Note: The operand is not resolved at this point because we want to
* get the associated object, not its value. For example, we don't
* want to resolve a FieldUnit to its value, we want the actual
* FieldUnit object.
*/
/* Get the type of the base object */
Status = AcpiExResolveMultiple (WalkState, Operand[0], &Type, NULL);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/* Allocate a descriptor to hold the type. */
ReturnDesc = AcpiUtCreateIntegerObject ((UINT64) Type);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
break;
case AML_SIZE_OF_OP: /* SizeOf (SourceObject) */
/*
* Note: The operand is not resolved at this point because we want to
* get the associated object, not its value.
*/
/* Get the base object */
Status = AcpiExResolveMultiple (WalkState,
Operand[0], &Type, &TempDesc);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/*
* The type of the base object must be integer, buffer, string, or
* package. All others are not supported.
*
* NOTE: Integer is not specifically supported by the ACPI spec,
* but is supported implicitly via implicit operand conversion.
* rather than bother with conversion, we just use the byte width
* global (4 or 8 bytes).
*/
switch (Type)
{
case ACPI_TYPE_INTEGER:
Value = AcpiGbl_IntegerByteWidth;
break;
case ACPI_TYPE_STRING:
Value = TempDesc->String.Length;
break;
case ACPI_TYPE_BUFFER:
/* Buffer arguments may not be evaluated at this point */
Status = AcpiDsGetBufferArguments (TempDesc);
Value = TempDesc->Buffer.Length;
break;
case ACPI_TYPE_PACKAGE:
/* Package arguments may not be evaluated at this point */
Status = AcpiDsGetPackageArguments (TempDesc);
Value = TempDesc->Package.Count;
break;
default:
ACPI_ERROR ((AE_INFO,
"Operand must be Buffer/Integer/String/Package - found type %s",
AcpiUtGetTypeName (Type)));
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/*
* Now that we have the size of the object, create a result
* object to hold the value
*/
ReturnDesc = AcpiUtCreateIntegerObject (Value);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
break;
case AML_REF_OF_OP: /* RefOf (SourceObject) */
Status = AcpiExGetObjectReference (Operand[0], &ReturnDesc, WalkState);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
break;
case AML_DEREF_OF_OP: /* DerefOf (ObjReference | String) */
/* Check for a method local or argument, or standalone String */
if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED)
{
TempDesc = AcpiNsGetAttachedObject (
(ACPI_NAMESPACE_NODE *) Operand[0]);
if (TempDesc &&
((TempDesc->Common.Type == ACPI_TYPE_STRING) ||
(TempDesc->Common.Type == ACPI_TYPE_LOCAL_REFERENCE)))
{
Operand[0] = TempDesc;
AcpiUtAddReference (TempDesc);
}
else
{
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
}
else
{
switch ((Operand[0])->Common.Type)
{
case ACPI_TYPE_LOCAL_REFERENCE:
/*
* This is a DerefOf (LocalX | ArgX)
*
* Must resolve/dereference the local/arg reference first
*/
switch (Operand[0]->Reference.Class)
{
case ACPI_REFCLASS_LOCAL:
case ACPI_REFCLASS_ARG:
/* Set Operand[0] to the value of the local/arg */
Status = AcpiDsMethodDataGetValue (
Operand[0]->Reference.Class,
Operand[0]->Reference.Value,
WalkState, &TempDesc);
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
/*
* Delete our reference to the input object and
* point to the object just retrieved
*/
AcpiUtRemoveReference (Operand[0]);
Operand[0] = TempDesc;
break;
case ACPI_REFCLASS_REFOF:
/* Get the object to which the reference refers */
TempDesc = Operand[0]->Reference.Object;
AcpiUtRemoveReference (Operand[0]);
Operand[0] = TempDesc;
break;
default:
/* Must be an Index op - handled below */
break;
}
break;
case ACPI_TYPE_STRING:
break;
default:
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
}
if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) != ACPI_DESC_TYPE_NAMED)
{
if ((Operand[0])->Common.Type == ACPI_TYPE_STRING)
{
/*
* This is a DerefOf (String). The string is a reference
* to a named ACPI object.
*
* 1) Find the owning Node
* 2) Dereference the node to an actual object. Could be a
* Field, so we need to resolve the node to a value.
*/
Status = AcpiNsGetNode (WalkState->ScopeInfo->Scope.Node,
Operand[0]->String.Pointer,
ACPI_NS_SEARCH_PARENT,
ACPI_CAST_INDIRECT_PTR (
ACPI_NAMESPACE_NODE, &ReturnDesc));
if (ACPI_FAILURE (Status))
{
goto Cleanup;
}
Status = AcpiExResolveNodeToValue (
ACPI_CAST_INDIRECT_PTR (
ACPI_NAMESPACE_NODE, &ReturnDesc),
WalkState);
goto Cleanup;
}
}
/* Operand[0] may have changed from the code above */
if (ACPI_GET_DESCRIPTOR_TYPE (Operand[0]) == ACPI_DESC_TYPE_NAMED)
{
/*
* This is a DerefOf (ObjectReference)
* Get the actual object from the Node (This is the dereference).
* This case may only happen when a LocalX or ArgX is
* dereferenced above.
*/
ReturnDesc = AcpiNsGetAttachedObject (
(ACPI_NAMESPACE_NODE *) Operand[0]);
AcpiUtAddReference (ReturnDesc);
}
else
{
/*
* This must be a reference object produced by either the
* Index() or RefOf() operator
*/
switch (Operand[0]->Reference.Class)
{
case ACPI_REFCLASS_INDEX:
/*
* The target type for the Index operator must be
* either a Buffer or a Package
*/
switch (Operand[0]->Reference.TargetType)
{
case ACPI_TYPE_BUFFER_FIELD:
TempDesc = Operand[0]->Reference.Object;
/*
* Create a new object that contains one element of the
* buffer -- the element pointed to by the index.
*
* NOTE: index into a buffer is NOT a pointer to a
* sub-buffer of the main buffer, it is only a pointer to a
* single element (byte) of the buffer!
*
* Since we are returning the value of the buffer at the
* indexed location, we don't need to add an additional
* reference to the buffer itself.
*/
ReturnDesc = AcpiUtCreateIntegerObject ((UINT64)
TempDesc->Buffer.Pointer[Operand[0]->Reference.Value]);
if (!ReturnDesc)
{
Status = AE_NO_MEMORY;
goto Cleanup;
}
break;
case ACPI_TYPE_PACKAGE:
/*
* Return the referenced element of the package. We must
* add another reference to the referenced object, however.
*/
ReturnDesc = *(Operand[0]->Reference.Where);
if (ReturnDesc)
{
AcpiUtAddReference (ReturnDesc);
}
break;
default:
ACPI_ERROR ((AE_INFO,
"Unknown Index TargetType 0x%X in reference object %p",
Operand[0]->Reference.TargetType, Operand[0]));
Status = AE_AML_OPERAND_TYPE;
goto Cleanup;
}
break;
case ACPI_REFCLASS_REFOF:
ReturnDesc = Operand[0]->Reference.Object;
if (ACPI_GET_DESCRIPTOR_TYPE (ReturnDesc) ==
ACPI_DESC_TYPE_NAMED)
{
ReturnDesc = AcpiNsGetAttachedObject (
(ACPI_NAMESPACE_NODE *) ReturnDesc);
}
/* Add another reference to the object! */
AcpiUtAddReference (ReturnDesc);
break;
default:
ACPI_ERROR ((AE_INFO,
"Unknown class in reference(%p) - 0x%2.2X",
Operand[0], Operand[0]->Reference.Class));
Status = AE_TYPE;
goto Cleanup;
}
}
break;
default:
ACPI_ERROR ((AE_INFO, "Unknown AML opcode 0x%X",
WalkState->Opcode));
Status = AE_AML_BAD_OPCODE;
goto Cleanup;
}
Cleanup:
/* Delete return object on error */
if (ACPI_FAILURE (Status))
{
AcpiUtRemoveReference (ReturnDesc);
}
/* Save return object on success */
else
{
WalkState->ResultObj = ReturnDesc;
}
return_ACPI_STATUS (Status);
}