| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/ixgb/@/contrib/dev/acpica/executer/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/ixgb/@/contrib/dev/acpica/executer/exprep.c |
/******************************************************************************
*
* Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define __EXPREP_C__
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acinterp.h>
#include <contrib/dev/acpica/include/amlcode.h>
#include <contrib/dev/acpica/include/acnamesp.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exprep")
/* Local prototypes */
static UINT32
AcpiExDecodeFieldAccess (
ACPI_OPERAND_OBJECT *ObjDesc,
UINT8 FieldFlags,
UINT32 *ReturnByteAlignment);
#ifdef ACPI_UNDER_DEVELOPMENT
static UINT32
AcpiExGenerateAccess (
UINT32 FieldBitOffset,
UINT32 FieldBitLength,
UINT32 RegionLength);
/*******************************************************************************
*
* FUNCTION: AcpiExGenerateAccess
*
* PARAMETERS: FieldBitOffset - Start of field within parent region/buffer
* FieldBitLength - Length of field in bits
* RegionLength - Length of parent in bytes
*
* RETURN: Field granularity (8, 16, 32 or 64) and
* ByteAlignment (1, 2, 3, or 4)
*
* DESCRIPTION: Generate an optimal access width for fields defined with the
* AnyAcc keyword.
*
* NOTE: Need to have the RegionLength in order to check for boundary
* conditions (end-of-region). However, the RegionLength is a deferred
* operation. Therefore, to complete this implementation, the generation
* of this access width must be deferred until the region length has
* been evaluated.
*
******************************************************************************/
static UINT32
AcpiExGenerateAccess (
UINT32 FieldBitOffset,
UINT32 FieldBitLength,
UINT32 RegionLength)
{
UINT32 FieldByteLength;
UINT32 FieldByteOffset;
UINT32 FieldByteEndOffset;
UINT32 AccessByteWidth;
UINT32 FieldStartOffset;
UINT32 FieldEndOffset;
UINT32 MinimumAccessWidth = 0xFFFFFFFF;
UINT32 MinimumAccesses = 0xFFFFFFFF;
UINT32 Accesses;
ACPI_FUNCTION_TRACE (ExGenerateAccess);
/* Round Field start offset and length to "minimal" byte boundaries */
FieldByteOffset = ACPI_DIV_8 (ACPI_ROUND_DOWN (FieldBitOffset, 8));
FieldByteEndOffset = ACPI_DIV_8 (ACPI_ROUND_UP (FieldBitLength +
FieldBitOffset, 8));
FieldByteLength = FieldByteEndOffset - FieldByteOffset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Bit length %u, Bit offset %u\n",
FieldBitLength, FieldBitOffset));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Byte Length %u, Byte Offset %u, End Offset %u\n",
FieldByteLength, FieldByteOffset, FieldByteEndOffset));
/*
* Iterative search for the maximum access width that is both aligned
* and does not go beyond the end of the region
*
* Start at ByteAcc and work upwards to QwordAcc max. (1,2,4,8 bytes)
*/
for (AccessByteWidth = 1; AccessByteWidth <= 8; AccessByteWidth <<= 1)
{
/*
* 1) Round end offset up to next access boundary and make sure that
* this does not go beyond the end of the parent region.
* 2) When the Access width is greater than the FieldByteLength, we
* are done. (This does not optimize for the perfectly aligned
* case yet).
*/
if (ACPI_ROUND_UP (FieldByteEndOffset, AccessByteWidth) <= RegionLength)
{
FieldStartOffset =
ACPI_ROUND_DOWN (FieldByteOffset, AccessByteWidth) /
AccessByteWidth;
FieldEndOffset =
ACPI_ROUND_UP ((FieldByteLength + FieldByteOffset),
AccessByteWidth) / AccessByteWidth;
Accesses = FieldEndOffset - FieldStartOffset;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"AccessWidth %u end is within region\n", AccessByteWidth));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field Start %u, Field End %u -- requires %u accesses\n",
FieldStartOffset, FieldEndOffset, Accesses));
/* Single access is optimal */
if (Accesses <= 1)
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Entire field can be accessed with one operation of size %u\n",
AccessByteWidth));
return_VALUE (AccessByteWidth);
}
/*
* Fits in the region, but requires more than one read/write.
* try the next wider access on next iteration
*/
if (Accesses < MinimumAccesses)
{
MinimumAccesses = Accesses;
MinimumAccessWidth = AccessByteWidth;
}
}
else
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"AccessWidth %u end is NOT within region\n", AccessByteWidth));
if (AccessByteWidth == 1)
{
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Field goes beyond end-of-region!\n"));
/* Field does not fit in the region at all */
return_VALUE (0);
}
/*
* This width goes beyond the end-of-region, back off to
* previous access
*/
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Backing off to previous optimal access width of %u\n",
MinimumAccessWidth));
return_VALUE (MinimumAccessWidth);
}
}
/*
* Could not read/write field with one operation,
* just use max access width
*/
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Cannot access field in one operation, using width 8\n"));
return_VALUE (8);
}
#endif /* ACPI_UNDER_DEVELOPMENT */
/*******************************************************************************
*
* FUNCTION: AcpiExDecodeFieldAccess
*
* PARAMETERS: ObjDesc - Field object
* FieldFlags - Encoded fieldflags (contains access bits)
* ReturnByteAlignment - Where the byte alignment is returned
*
* RETURN: Field granularity (8, 16, 32 or 64) and
* ByteAlignment (1, 2, 3, or 4)
*
* DESCRIPTION: Decode the AccessType bits of a field definition.
*
******************************************************************************/
static UINT32
AcpiExDecodeFieldAccess (
ACPI_OPERAND_OBJECT *ObjDesc,
UINT8 FieldFlags,
UINT32 *ReturnByteAlignment)
{
UINT32 Access;
UINT32 ByteAlignment;
UINT32 BitLength;
ACPI_FUNCTION_TRACE (ExDecodeFieldAccess);
Access = (FieldFlags & AML_FIELD_ACCESS_TYPE_MASK);
switch (Access)
{
case AML_FIELD_ACCESS_ANY:
#ifdef ACPI_UNDER_DEVELOPMENT
ByteAlignment =
AcpiExGenerateAccess (ObjDesc->CommonField.StartFieldBitOffset,
ObjDesc->CommonField.BitLength,
0xFFFFFFFF /* Temp until we pass RegionLength as parameter */);
BitLength = ByteAlignment * 8;
#endif
ByteAlignment = 1;
BitLength = 8;
break;
case AML_FIELD_ACCESS_BYTE:
case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */
ByteAlignment = 1;
BitLength = 8;
break;
case AML_FIELD_ACCESS_WORD:
ByteAlignment = 2;
BitLength = 16;
break;
case AML_FIELD_ACCESS_DWORD:
ByteAlignment = 4;
BitLength = 32;
break;
case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */
ByteAlignment = 8;
BitLength = 64;
break;
default:
/* Invalid field access type */
ACPI_ERROR ((AE_INFO,
"Unknown field access type 0x%X",
Access));
return_UINT32 (0);
}
if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD)
{
/*
* BufferField access can be on any byte boundary, so the
* ByteAlignment is always 1 byte -- regardless of any ByteAlignment
* implied by the field access type.
*/
ByteAlignment = 1;
}
*ReturnByteAlignment = ByteAlignment;
return_UINT32 (BitLength);
}
/*******************************************************************************
*
* FUNCTION: AcpiExPrepCommonFieldObject
*
* PARAMETERS: ObjDesc - The field object
* FieldFlags - Access, LockRule, and UpdateRule.
* The format of a FieldFlag is described
* in the ACPI specification
* FieldAttribute - Special attributes (not used)
* FieldBitPosition - Field start position
* FieldBitLength - Field length in number of bits
*
* RETURN: Status
*
* DESCRIPTION: Initialize the areas of the field object that are common
* to the various types of fields. Note: This is very "sensitive"
* code because we are solving the general case for field
* alignment.
*
******************************************************************************/
ACPI_STATUS
AcpiExPrepCommonFieldObject (
ACPI_OPERAND_OBJECT *ObjDesc,
UINT8 FieldFlags,
UINT8 FieldAttribute,
UINT32 FieldBitPosition,
UINT32 FieldBitLength)
{
UINT32 AccessBitWidth;
UINT32 ByteAlignment;
UINT32 NearestByteAddress;
ACPI_FUNCTION_TRACE (ExPrepCommonFieldObject);
/*
* Note: the structure being initialized is the
* ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
* area are initialized by this procedure.
*/
ObjDesc->CommonField.FieldFlags = FieldFlags;
ObjDesc->CommonField.Attribute = FieldAttribute;
ObjDesc->CommonField.BitLength = FieldBitLength;
/*
* Decode the access type so we can compute offsets. The access type gives
* two pieces of information - the width of each field access and the
* necessary ByteAlignment (address granularity) of the access.
*
* For AnyAcc, the AccessBitWidth is the largest width that is both
* necessary and possible in an attempt to access the whole field in one
* I/O operation. However, for AnyAcc, the ByteAlignment is always one
* byte.
*
* For all Buffer Fields, the ByteAlignment is always one byte.
*
* For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
* the same (equivalent) as the ByteAlignment.
*/
AccessBitWidth = AcpiExDecodeFieldAccess (ObjDesc, FieldFlags,
&ByteAlignment);
if (!AccessBitWidth)
{
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
/* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
ObjDesc->CommonField.AccessByteWidth = (UINT8)
ACPI_DIV_8 (AccessBitWidth);
/*
* BaseByteOffset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
* unit) of the field. (i.e., the first datum that contains at least the
* first *bit* of the field.)
*
* Note: ByteAlignment is always either equal to the AccessBitWidth or 8
* (Byte access), and it defines the addressing granularity of the parent
* region or buffer.
*/
NearestByteAddress =
ACPI_ROUND_BITS_DOWN_TO_BYTES (FieldBitPosition);
ObjDesc->CommonField.BaseByteOffset = (UINT32)
ACPI_ROUND_DOWN (NearestByteAddress, ByteAlignment);
/*
* StartFieldBitOffset is the offset of the first bit of the field within
* a field datum.
*/
ObjDesc->CommonField.StartFieldBitOffset = (UINT8)
(FieldBitPosition - ACPI_MUL_8 (ObjDesc->CommonField.BaseByteOffset));
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AcpiExPrepFieldValue
*
* PARAMETERS: Info - Contains all field creation info
*
* RETURN: Status
*
* DESCRIPTION: Construct an ACPI_OPERAND_OBJECT of type DefField and
* connect it to the parent Node.
*
******************************************************************************/
ACPI_STATUS
AcpiExPrepFieldValue (
ACPI_CREATE_FIELD_INFO *Info)
{
ACPI_OPERAND_OBJECT *ObjDesc;
ACPI_OPERAND_OBJECT *SecondDesc = NULL;
ACPI_STATUS Status;
UINT32 AccessByteWidth;
UINT32 Type;
ACPI_FUNCTION_TRACE (ExPrepFieldValue);
/* Parameter validation */
if (Info->FieldType != ACPI_TYPE_LOCAL_INDEX_FIELD)
{
if (!Info->RegionNode)
{
ACPI_ERROR ((AE_INFO, "Null RegionNode"));
return_ACPI_STATUS (AE_AML_NO_OPERAND);
}
Type = AcpiNsGetType (Info->RegionNode);
if (Type != ACPI_TYPE_REGION)
{
ACPI_ERROR ((AE_INFO, "Needed Region, found type 0x%X (%s)",
Type, AcpiUtGetTypeName (Type)));
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
}
/* Allocate a new field object */
ObjDesc = AcpiUtCreateInternalObject (Info->FieldType);
if (!ObjDesc)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Initialize areas of the object that are common to all fields */
ObjDesc->CommonField.Node = Info->FieldNode;
Status = AcpiExPrepCommonFieldObject (ObjDesc,
Info->FieldFlags, Info->Attribute,
Info->FieldBitPosition, Info->FieldBitLength);
if (ACPI_FAILURE (Status))
{
AcpiUtDeleteObjectDesc (ObjDesc);
return_ACPI_STATUS (Status);
}
/* Initialize areas of the object that are specific to the field type */
switch (Info->FieldType)
{
case ACPI_TYPE_LOCAL_REGION_FIELD:
ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
/* Allow full data read from EC address space */
if ((ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) &&
(ObjDesc->CommonField.BitLength > 8))
{
AccessByteWidth = ACPI_ROUND_BITS_UP_TO_BYTES (
ObjDesc->CommonField.BitLength);
/* Maximum byte width supported is 255 */
if (AccessByteWidth < 256)
{
ObjDesc->CommonField.AccessByteWidth = (UINT8) AccessByteWidth;
}
}
/* An additional reference for the container */
AcpiUtAddReference (ObjDesc->Field.RegionObj);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
ObjDesc->Field.StartFieldBitOffset, ObjDesc->Field.BaseByteOffset,
ObjDesc->Field.AccessByteWidth, ObjDesc->Field.RegionObj));
break;
case ACPI_TYPE_LOCAL_BANK_FIELD:
ObjDesc->BankField.Value = Info->BankValue;
ObjDesc->BankField.RegionObj =
AcpiNsGetAttachedObject (Info->RegionNode);
ObjDesc->BankField.BankObj =
AcpiNsGetAttachedObject (Info->RegisterNode);
/* An additional reference for the attached objects */
AcpiUtAddReference (ObjDesc->BankField.RegionObj);
AcpiUtAddReference (ObjDesc->BankField.BankObj);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
ObjDesc->BankField.StartFieldBitOffset,
ObjDesc->BankField.BaseByteOffset,
ObjDesc->Field.AccessByteWidth,
ObjDesc->BankField.RegionObj,
ObjDesc->BankField.BankObj));
/*
* Remember location in AML stream of the field unit
* opcode and operands -- since the BankValue
* operands must be evaluated.
*/
SecondDesc = ObjDesc->Common.NextObject;
SecondDesc->Extra.AmlStart = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
Info->DataRegisterNode)->Named.Data;
SecondDesc->Extra.AmlLength = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
Info->DataRegisterNode)->Named.Length;
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* Get the Index and Data registers */
ObjDesc->IndexField.IndexObj =
AcpiNsGetAttachedObject (Info->RegisterNode);
ObjDesc->IndexField.DataObj =
AcpiNsGetAttachedObject (Info->DataRegisterNode);
if (!ObjDesc->IndexField.DataObj || !ObjDesc->IndexField.IndexObj)
{
ACPI_ERROR ((AE_INFO, "Null Index Object during field prep"));
AcpiUtDeleteObjectDesc (ObjDesc);
return_ACPI_STATUS (AE_AML_INTERNAL);
}
/* An additional reference for the attached objects */
AcpiUtAddReference (ObjDesc->IndexField.DataObj);
AcpiUtAddReference (ObjDesc->IndexField.IndexObj);
/*
* April 2006: Changed to match MS behavior
*
* The value written to the Index register is the byte offset of the
* target field in units of the granularity of the IndexField
*
* Previously, the value was calculated as an index in terms of the
* width of the Data register, as below:
*
* ObjDesc->IndexField.Value = (UINT32)
* (Info->FieldBitPosition / ACPI_MUL_8 (
* ObjDesc->Field.AccessByteWidth));
*
* February 2006: Tried value as a byte offset:
* ObjDesc->IndexField.Value = (UINT32)
* ACPI_DIV_8 (Info->FieldBitPosition);
*/
ObjDesc->IndexField.Value = (UINT32) ACPI_ROUND_DOWN (
ACPI_DIV_8 (Info->FieldBitPosition),
ObjDesc->IndexField.AccessByteWidth);
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
ObjDesc->IndexField.StartFieldBitOffset,
ObjDesc->IndexField.BaseByteOffset,
ObjDesc->IndexField.Value,
ObjDesc->Field.AccessByteWidth,
ObjDesc->IndexField.IndexObj,
ObjDesc->IndexField.DataObj));
break;
default:
/* No other types should get here */
break;
}
/*
* Store the constructed descriptor (ObjDesc) into the parent Node,
* preserving the current type of that NamedObj.
*/
Status = AcpiNsAttachObject (Info->FieldNode, ObjDesc,
AcpiNsGetType (Info->FieldNode));
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set NamedObj %p [%4.4s], ObjDesc %p\n",
Info->FieldNode, AcpiUtGetNodeName (Info->FieldNode), ObjDesc));
/* Remove local reference to the object */
AcpiUtRemoveReference (ObjDesc);
return_ACPI_STATUS (Status);
}