Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/libalias/modules/irc/@/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_1080/@/dev/hptmv/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/libalias/modules/irc/@/amd64/compile/hs32/modules/usr/src/sys/modules/ispfw/isp_1080/@/dev/hptmv/command.h |
/* * Copyright (c) 2004-2005 HighPoint Technologies, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/dev/hptmv/command.h 190809 2009-04-07 16:38:25Z delphij $ */ #ifndef _COMMAND_H_ #define _COMMAND_H_ /*************************************************************************** * Description: Command ***************************************************************************/ typedef struct _AtaCommand { LBA_T Lba; /* Current Logic Disk command: LBA */ USHORT nSectors; /* sector count. May great than 0x80 */ UCHAR Command; /* IDE_COMMAND_READ, _WRITE, _VERIFY */ UCHAR QueueTag; } AtaComm, *PAtaComm; typedef struct _PassthroughCmd { BYTE bFeaturesReg; /* feature register */ BYTE bSectorCountReg; /* IDE sector count register. */ BYTE bLbaLowReg; /* IDE sector number register. */ BYTE bLbaMidReg; /* IDE low order cylinder value. */ BYTE bLbaHighReg; /* IDE high order cylinder value. */ BYTE bDriveHeadReg; /* IDE drive/head register. */ BYTE bCommandReg; /* Actual IDE command. Checked for validity by driver. */ BYTE nSectors; /* data transfer */ ADDRESS pDataBuffer; /* data buffer */ } PassthroughCmd; /* control commands */ #define CTRL_CMD_REBUILD 1 #define CTRL_CMD_VERIFY 2 #define CTRL_CMD_INIT 3 /* * RAID5 rebuild/verify * Rebuild/verify one stripe line. * The caller needn't supply a buffer for rebuild. * RebuildSectors member will be updated if its previous location is the * begin of this stripe line. */ typedef struct _R5ControlCmd { LBA_T StripeLine; /* _physical_ stripe line on array */ USHORT Offset; /* internal use, don't set */ UCHAR Command; /* CTRL_CMD_XXX */ UCHAR reserve1; } R5ControlCmd, *PR5ControlCmd; /* * RAID1 rebuild/verify * Rebuild/verify specified sectors. * The caller must supply a valid buffer and a physical SG table (or a * pfnBuildSgl routine). * For rebuild/initialize, the buffer size should be nSectors<<9; * For verify, the buffer size should be (nSectors*2)<<9. * RebuildSectors member will be updated if its previous value equals Lba. */ typedef struct _R1ControlCmd { LBA_T Lba; USHORT nSectors; UCHAR Command; /* CTRL_CMD_XXX */ UCHAR reserve1; ADDRESS Buffer; /* buffer logical address */ #ifdef _MACOSX_ ADDRESS PhysicalAddress; #endif } R1ControlCmd, *PR1ControlCmd; typedef struct _Command { PVDevice pVDevice; union{ /* Ide Command */ AtaComm Ide; PassthroughCmd Passthrough; /* Atapi Command */ UCHAR Atapi[12]; /* Control command */ R5ControlCmd R5Control; R1ControlCmd R1Control; } uCmd; USHORT cf_physical_sg: 1; USHORT cf_data_in: 1; USHORT cf_data_out: 1; USHORT cf_atapi: 1; USHORT cf_ide_passthrough: 1; USHORT cf_control: 1; /* return status */ UCHAR Result; /* retry count */ UCHAR RetryCount; /* S/G table address, if already prepared */ FPSCAT_GATH pSgTable; /* called if pSgTable is invalid. */ int (* HPTLIBAPI pfnBuildSgl)(_VBUS_ARG PCommand pCmd, FPSCAT_GATH pSgTable, int logical); /* called when this command is finished */ void (* HPTLIBAPI pfnCompletion)(_VBUS_ARG PCommand pCmd); /* pointer to origional command */ void *pOrgCommand; /* scratch data area */ union { struct { LBA_T StartLBA; UCHAR FirstMember; /* the sequence number of the first member */ UCHAR LastMember; /* the sequence number of the last member */ USHORT LastSectors; /* the number of sectors for the last member */ USHORT FirstSectors; /* the number of sectors for the first member */ USHORT FirstOffset; /* the offset from the StartLBA for the first member */ USHORT AllMemberBlocks;/* the number of sectors for all member */ USHORT WaitInterrupt; /* bit map the members who wait interrupt */ UCHAR InSameLine; /* if the start and end on the same line */ UCHAR pad1; } array; struct { LBA_T StartLBA; USHORT FirstSectors; /* the number of sectors for the first member */ USHORT FirstOffset; /* the offset from the StartLBA for the first member */ USHORT WaitInterrupt; /* bit map the members who wait interrupt */ USHORT r5_gap; /* see raid5.c */ UCHAR ParDiskNo; /* parity for startLba */ UCHAR BadDiskNo; UCHAR FirstMember; UCHAR pad1; } r5; struct { PCommand pCmd1; PCommand pCmd2; } r5split; #ifdef _RAID5N_ struct { ULONG dummy[2]; /* uScratch.wait shall be moved out uScratch. now just fix it thisway */ struct range_lock *range_lock; struct stripe *stripes[5]; UCHAR nstripes; UCHAR finished_stripes; USHORT pad2; /* for direct-read: */ struct { UCHAR cmds; UCHAR finished; UCHAR first; UCHAR parity; LBA_T base; USHORT firstoffset; USHORT firstsectors; } dr; } r5n2; #endif struct { ULONG WordsLeft; FPSCAT_GATH pPIOSg; void (* HPTLIBAPI pfnOrgDone)(_VBUS_ARG PCommand pCmd); #ifdef SUPPORT_HPT584 UCHAR cmd; #endif } disk; struct { PCommand pNext; void (* HPTLIBAPI WaitEntry)(_VBUS_ARG PCommand pCmd); } wait; struct { PVOID prdAddr; ULONG cmd_priv; USHORT responseFlags; UCHAR bIdeStatus; UCHAR errorRegister; } sata_param; } uScratch; } Command; /*************************************************************************** * command return value ***************************************************************************/ #define RETURN_PENDING 0 #define RETURN_SUCCESS 1 #define RETURN_BAD_DEVICE 2 #define RETURN_BAD_PARAMETER 3 #define RETURN_WRITE_NO_DRQ 4 #define RETURN_DEVICE_BUSY 5 #define RETURN_INVALID_REQUEST 6 #define RETURN_SELECTION_TIMEOUT 7 #define RETURN_IDE_ERROR 8 #define RETURN_NEED_LOGICAL_SG 9 #define RETURN_NEED_PHYSICAL_SG 10 #define RETURN_RETRY 11 #define RETURN_DATA_ERROR 12 #define RETURN_BUS_RESET 13 #define RETURN_BAD_TRANSFER_LENGTH 14 typedef void (* HPTLIBAPI DPC_PROC)(_VBUS_ARG void *); typedef struct _dpc_routine { DPC_PROC proc; void *arg; } DPC_ROUTINE; /* * MAX_QUEUE_COMM is defined in platform related compiler.h * to specify the maximum requests allowed (for each VBus) from system. * * Maximum command blocks needed for each VBus: * Each OS command requests 1+MAX_MEMBERS*2 command blocks (RAID1/0 case) * This space is allocated by platform dependent part, either static or * dynamic, continuous or non-continous. * The code only needs _vbus_(pFreeCommands) to be set. * * PendingRoutines[] size: * Each command may invoke CallAfterReturn once. * * IdleRoutines[] size: * Each command may invoke CallWhenIdle once. */ #define MAX_COMMAND_BLOCKS_FOR_EACH_VBUS (MAX_QUEUE_COMM * (1+MAX_MEMBERS*2) + 1) #define MAX_PENDING_ROUTINES (MAX_COMMAND_BLOCKS_FOR_EACH_VBUS+1) #define MAX_IDLE_ROUTINES (MAX_COMMAND_BLOCKS_FOR_EACH_VBUS+1) #define mWaitingForIdle(pVBus) ((pVBus)->IdleRoutinesFirst!=(pVBus)->IdleRoutinesLast) PCommand HPTLIBAPI AllocateCommand(_VBUS_ARG0); void FASTCALL FreeCommand(_VBUS_ARG PCommand pCmd); void FASTCALL CallAfterReturn(_VBUS_ARG DPC_PROC proc, void *arg); void HPTLIBAPI CheckPendingCall(_VBUS_ARG0); void FASTCALL CallWhenIdle(_VBUS_ARG DPC_PROC proc, void *arg); void HPTLIBAPI CheckIdleCall(_VBUS_ARG0); void HPTLIBAPI AddToWaitingList(PCommand *ppList, PCommand pCmd); void HPTLIBAPI DoWaitingList(_VBUS_ARG PCommand *ppList); #endif