| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/lindev/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/lindev/@/dev/isci/scil/scic_controller.h |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD: release/9.1.0/sys/dev/isci/scil/scic_controller.h 231689 2012-02-14 15:58:49Z jimharris $
*/
#ifndef _SCIC_CONTROLLER_H_
#define _SCIC_CONTROLLER_H_
/**
* @file
*
* @brief This file contains all of the interface methods that can be called
* by an SCIC user on a controller object.
*/
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include <dev/isci/scil/sci_types.h>
#include <dev/isci/scil/sci_status.h>
#include <dev/isci/scil/sci_controller.h>
#include <dev/isci/scil/scic_config_parameters.h>
/**
* @enum
*
* Allowed PORT configuration modes
*
* APC Automatic PORT configuration mode is defined by the OEM configuration
* parameters providing no PHY_MASK parameters for any PORT. i.e. There are
* no phys assigned to any of the ports at start.
*
* MPC Manual PORT configuration mode is defined by the OEM configuration
* parameters providing a PHY_MASK value for any PORT. It is assumed that
* any PORT with no PHY_MASK is an invalid port and not all PHYs must be
* assigned. A PORT_PHY mask that assigns just a single PHY to a port and no
* other PHYs being assigned is sufficient to declare manual PORT configuration.
*/
enum SCIC_PORT_CONFIGURATION_MODE
{
SCIC_PORT_MANUAL_CONFIGURATION_MODE,
SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE
};
/**
* @enum _SCIC_INTERRUPT_TYPE
*
* @brief This enumeration depicts the various types of interrupts that
* are potentially supported by a SCI Core implementation.
*/
typedef enum _SCIC_INTERRUPT_TYPE
{
SCIC_LEGACY_LINE_INTERRUPT_TYPE,
SCIC_MSIX_INTERRUPT_TYPE,
/**
* This enumeration value indicates the use of polling.
*/
SCIC_NO_INTERRUPTS
} SCIC_INTERRUPT_TYPE;
/**
* @typedef SCIC_CONTROLLER_INTERRUPT_HANDLER
*
* @brief This method is called by the SCI user in order to have the SCI
* implementation handle the interrupt. This method performs
* minimal processing to allow for streamlined interrupt time usage.
* @note
* TRUE: returned if there is an interrupt to process and it was
* processed.
* FALSE: returned if no interrupt was processed.
*
*/
typedef BOOL (*SCIC_CONTROLLER_INTERRUPT_HANDLER)(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method is called by the SCI user to process completions
* generated as a result of a previously handled interrupt. This
* method will result in the completion of IO requests and handling
* of other controller generated events. This method should be
* called some time after the interrupt handler.
*
* @note Most, if not all, of the user callback APIs are invoked from within
* this API. As a result, the user should be cognizent of the operating
* level at which they invoke this API.
*
*/
typedef void (*SCIC_CONTROLLER_COMPLETION_HANDLER)(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @struct SCIC_CONTROLLER_HANDLER_METHODS
*
* @brief This structure contains an interrupt handler and completion
* handler function pointers.
*/
typedef struct SCIC_CONTROLLER_HANDLER_METHODS
{
SCIC_CONTROLLER_INTERRUPT_HANDLER interrupt_handler;
SCIC_CONTROLLER_COMPLETION_HANDLER completion_handler;
} SCIC_CONTROLLER_HANDLER_METHODS_T;
/**
* @brief This method will attempt to construct a controller object
* utilizing the supplied parameter information.
*
* @param[in] library This parameter specifies the handle to the library
* object associated with the controller being constructed.
* @param[in] controller This parameter specifies the controller to be
* constructed.
* @param[in] user_object This parameter is a reference to the SCIL users
* controller object and will be used to associate with the core
* controller.
*
* @return Indicate if the controller was successfully constructed or if
* it failed in some way.
* @retval SCI_SUCCESS This value is returned if the controller was
* successfully constructed.
* @retval SCI_WARNING_TIMER_CONFLICT This value is returned if the
* interrupt coalescence timer may cause SAS compliance issues
* for SMP Target mode response processing.
* @retval SCI_FAILURE_UNSUPPORTED_CONTROLLER_TYPE This value is returned if
* the controller does not support the supplied type.
* @retval SCI_FAILURE_UNSUPPORTED_INIT_DATA_VERSION This value is returned
* if the controller does not support the supplied initialization
* data version.
*/
SCI_STATUS scic_controller_construct(
SCI_LIBRARY_HANDLE_T library,
SCI_CONTROLLER_HANDLE_T controller,
void * user_object
);
/**
* @brief This method will enable all controller interrupts.
*
* @param[in] controller This parameter specifies the controller for which
* to enable interrupts.
*
* @return none
*/
void scic_controller_enable_interrupts(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method will disable all controller interrupts.
*
* @param[in] controller This parameter specifies the controller for which
* to disable interrupts.
*
* @return none
*/
void scic_controller_disable_interrupts(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method will return provide function pointers for the
* interrupt handler and completion handler. The interrupt handler
* is expected to be invoked at interrupt time. The completion
* handler is scheduled to run as a result of the interrupt handler.
* The completion handler performs the bulk work for processing
* silicon events.
*
* @param[in] interrupt_type This parameter informs the core which type
* of interrupt/completion methods are being requested. These
* are the types: SCIC_LEGACY_LINE_INTERRUPT_TYPE,
* SCIC_MSIX_INTERRUPT_TYPE, SCIC_NO_INTERRUPTS (POLLING)
* @param[in] message_count This parameter informs the core the
* number of MSI-X messages to be utilized. This parameter must
* be 0 when requesting legacy line based handlers.
* @param[in] handler_methods The caller provides a pointer to a buffer of
* type SCIC_CONTROLLER_HANDLER_METHODS_T. The size depends on
* the combination of the interrupt_type and message_count input
* parameters:
* SCIC_LEGACY_LINE_INTERRUPT_TYPE:
* - size = sizeof(SCIC_CONTROLLER_HANDLER_METHODS_T)
* SCIC_MSIX_INTERRUPT_TYPE:
* - size = message_count*sizeof(SCIC_CONTROLLER_HANDLER_METHODS_T)
* @param[out] handler_methods SCIC fills out the caller's buffer with the
* appropriate interrupt and completion handlers based on the info
* provided in the interrupt_type and message_count input
* parameters. For SCIC_LEGACY_LINE_INTERRUPT_TYPE, the buffer
* receives a single SCIC_CONTROLLER_HANDLER_METHODS_T element
* regardless that the message_count parameter is zero.
* For SCIC_MSIX_INTERRUPT_TYPE, the buffer receives an array of
* elements of type SCIC_CONTROLLER_HANDLER_METHODS_T where the
* array size is equivalent to the message_count parameter. The
* array is zero-relative where entry zero corresponds to
* message-vector zero, entry one corresponds to message-vector one,
* and so forth.
*
* @return Indicate if the handler retrieval operation was successful.
* @retval SCI_SUCCESS This value is returned if retrieval succeeded.
* @retval SCI_FAILURE_UNSUPPORTED_MESSAGE_COUNT This value is returned
* if the user supplied an unsupported number of MSI-X messages.
* For legacy line interrupts the only valid value is 0.
*/
SCI_STATUS scic_controller_get_handler_methods(
SCIC_INTERRUPT_TYPE interrupt_type,
U16 message_count,
SCIC_CONTROLLER_HANDLER_METHODS_T * handler_methods
);
/**
* @brief This method will initialize the controller hardware managed by
* the supplied core controller object. This method will bring the
* physical controller hardware out of reset and enable the core to
* determine the capabilities of the hardware being managed. Thus,
* the core controller can determine it's exact physical (DMA capable)
* memory requirements.
*
* @pre The SCI Core user must have called scic_controller_construct()
* on the supplied controller object previously.
*
* @param[in] controller This parameter specifies the controller to be
* initialized.
*
* @return Indicate if the controller was successfully initialized or if
* it failed in some way.
* @retval SCI_SUCCESS This value is returned if the controller hardware
* was successfully initialized.
*/
SCI_STATUS scic_controller_initialize(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method returns the suggested scic_controller_start()
* timeout amount. The user is free to use any timeout value,
* but this method provides the suggested minimum start timeout
* value. The returned value is based upon empirical information
* determined as a result of interoperability testing.
*
* @param[in] controller the handle to the controller object for which
* to return the suggested start timeout.
*
* @return This method returns the number of milliseconds for the
* suggested start operation timeout.
*/
U32 scic_controller_get_suggested_start_timeout(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method will start the supplied core controller. This method
* will start the staggered spin up operation. The SCI User completion
* callback is called when the following conditions are met:
* -# the return status of this method is SCI_SUCCESS.
* -# after all of the phys have successfully started or been given
* the opportunity to start.
*
* @pre The SCI Core user must have filled in the physical memory
* descriptor structure via the
* sci_controller_get_memory_descriptor_list() method.
* @pre The SCI Core user must have invoked the scic_controller_initialize()
* method prior to invoking this method.
*
* @pre The controller must be in the INITIALIZED or STARTED state.
*
* @param[in] controller the handle to the controller object to start.
* @param[in] timeout This parameter specifies the number of milliseconds
* in which the start operation should complete.
*
* @return Indicate if the controller start method succeeded or failed in
* some way.
* @retval SCI_SUCCESS if the start operation succeeded.
* @retval SCI_WARNING_ALREADY_IN_STATE if the controller is already in
* the STARTED state.
* @retval SCI_FAILURE_INVALID_STATE if the controller is not either in
* the INITIALIZED or STARTED states.
* @retval SCI_FAILURE_INVALID_MEMORY_DESCRIPTOR if there are
* inconsistent or invalid values in the supplied
* SCI_PHYSICAL_MEMORY_DESCRIPTOR array.
*/
SCI_STATUS scic_controller_start(
SCI_CONTROLLER_HANDLE_T controller,
U32 timeout
);
/**
* @brief This method will stop an individual controller object.This method
* will invoke the associated user callback upon completion. The
* completion callback is called when the following conditions are met:
* -# the method return status is SCI_SUCCESS.
* -# the controller has been quiesced.
* This method will ensure that all IO requests are quiesced, phys
* are stopped, and all additional operation by the hardware is halted.
*
* @pre The controller must be in the STARTED or STOPPED state.
*
* @param[in] controller the handle to the controller object to stop.
* @param[in] timeout This parameter specifies the number of milliseconds
* in which the stop operation should complete.
*
* @return Indicate if the controller stop method succeeded or failed in
* some way.
* @retval SCI_SUCCESS if the stop operation successfully began.
* @retval SCI_WARNING_ALREADY_IN_STATE if the controller is already in
* the STOPPED state.
* @retval SCI_FAILURE_INVALID_STATE if the controller is not either in
* the STARTED or STOPPED states.
*/
SCI_STATUS scic_controller_stop(
SCI_CONTROLLER_HANDLE_T controller,
U32 timeout
);
/**
* @brief This method will reset the supplied core controller regardless of
* the state of said controller. This operation is considered
* destructive. In other words, all current operations are wiped
* out. No IO completions for outstanding devices occur. Outstanding
* IO requests are not aborted or completed at the actual remote
* device.
*
* @param[in] controller the handle to the controller object to reset.
*
* @return Indicate if the controller reset method succeeded or failed in
* some way.
* @retval SCI_SUCCESS if the reset operation successfully started.
* @retval SCI_FATAL_ERROR if the controller reset operation is unable to
* complete.
*/
SCI_STATUS scic_controller_reset(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method is called by the SCI user to send/start an IO request.
* If the method invocation is successful, then the IO request has
* been queued to the hardware for processing.
*
* @warning
* - IO tags are a protected resource. It is incumbent upon the
* SCI Core user to ensure that each of the methods that may
* allocate or free available IO tags are handled in a mutually
* exclusive manner. This method is one of said methods requiring
* proper critical code section protection (e.g. semaphore,
* spin-lock, etc.).
* - For SATA, the user is required to manage NCQ tags. As a
* result, it is expected the user will have set the NCQ tag
* field in the host to device register FIS prior to calling
* this method. There is also a requirement for the user
* to call scic_stp_io_set_ncq_tag() prior to invoking the
* scic_controller_start_io() method.
*
* @param[in] controller the handle to the controller object for which
* to start an IO request.
* @param[in] remote_device the handle to the remote device object for which
* to start an IO request.
* @param[in] io_request the handle to the io request object to start.
* @param[in] io_tag This parameter specifies a previously allocated IO tag
* that the user desires to be utilized for this request.
* This parameter is optional. The user is allowed to supply
* SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter.
* @see scic_controller_allocate_tag() for more information
* on allocating a tag.
*
* @return Indicate if the controller successfully started the IO request.
* @retval SCI_IO_SUCCESS if the IO request was successfully started.
*
* @todo Determine the failure situations and return values.
*/
SCI_IO_STATUS scic_controller_start_io(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_IO_REQUEST_HANDLE_T io_request,
U16 io_tag
);
#if !defined(DISABLE_TASK_MANAGEMENT)
/**
* @brief This method is called by the SCIC user to send/start a framework
* task management request.
*
* @warning
* - IO tags are a protected resource. It is incumbent upon the
* SCI Core user to ensure that each of the methods that may
* allocate or free available IO tags are handled in a mutually
* exclusive manner. This method is one of said methods requiring
* proper critical code section protection (e.g. semaphore,
* spin-lock, etc.).
* - The user must synchronize this task with completion queue
* processing. If they are not synchronized then it is possible
* for the io requests that are being managed by the task request
* can complete before starting the task request.
*
* @param[in] controller the handle to the controller object for which
* to start the task management request.
* @param[in] remote_device the handle to the remote device object for which
* to start the task management request.
* @param[in] task_request the handle to the task request object to start.
* @param[in] io_tag This parameter specifies a previously allocated IO tag
* that the user desires to be utilized for this request. Note
* this not the io_tag of the request being managed. It is to
* be utilized for the task request itself.
* This parameter is optional. The user is allowed to supply
* SCI_CONTROLLER_INVALID_IO_TAG as the value for this parameter.
* @see scic_controller_allocate_tag() for more information
* on allocating a tag.
*
* @return Indicate if the controller successfully started the IO request.
* @retval SCI_TASK_SUCCESS if the task request was successfully started.
* @retval SCI_TASK_FAILURE_REQUIRES_SCSI_ABORT This value is returned if
* there is/are task(s) outstanding that require termination or
* completion before this request can succeed.
*/
SCI_TASK_STATUS scic_controller_start_task(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_TASK_REQUEST_HANDLE_T task_request,
U16 io_tag
);
/**
* @brief This method will perform core specific completion operations for
* task management request. After this method is invoked, the user should
* consider the task request as invalid until it is properly reused
* (i.e. re-constructed).
*
* @param[in] controller The handle to the controller object for which
* to complete the task management request.
* @param[in] remote_device The handle to the remote device object for which
* to complete the task management request.
* @param[in] task_request the handle to the task management request object
* to complete.
*
* @return Indicate if the controller successfully completed the task
* management request.
* @retval SCI_SUCCESS if the completion process was successful.
*/
SCI_STATUS scic_controller_complete_task(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_TASK_REQUEST_HANDLE_T task_request
);
#else // !defined(DISABLE_TASK_MANAGEMENT)
#define scic_controller_start_task(controller, dev, task, tag) SCI_TASK_FAILURE
#define scic_controller_complete_task(controller, dev, task) SCI_FAILURE
#endif // !defined(DISABLE_TASK_MANAGEMENT)
/**
* @brief This method is called by the SCI Core user to terminate an ongoing
* (i.e. started) core IO request. This does not abort the IO request
* at the target, but rather removes the IO request from the host
* controller.
*
* @param[in] controller the handle to the controller object for which
* to terminate a request.
* @param[in] remote_device the handle to the remote device object for which
* to terminate a request.
* @param[in] request the handle to the io or task management request
* object to terminate.
*
* @return Indicate if the controller successfully began the terminate process
* for the IO request.
* @retval SCI_SUCCESS if the terminate process was successfully started for
* the request.
*
* @todo Determine the failure situations and return values.
*/
SCI_STATUS scic_controller_terminate_request(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_IO_REQUEST_HANDLE_T request
);
/**
* @brief This method will perform core specific completion operations for
* an IO request. After this method is invoked, the user should
* consider the IO request as invalid until it is properly reused
* (i.e. re-constructed).
*
* @warning
* - IO tags are a protected resource. It is incumbent upon the
* SCI Core user to ensure that each of the methods that may
* allocate or free available IO tags are handled in a mutually
* exclusive manner. This method is one of said methods requiring
* proper critical code section protection (e.g. semaphore,
* spin-lock, etc.).
* - If the IO tag for a request was allocated, by the SCI Core user,
* using the scic_controller_allocate_io_tag() method, then it is
* the responsibility of the caller to invoke the
* scic_controller_free_io_tag() method to free the tag (i.e. this
* method will not free the IO tag).
*
* @param[in] controller The handle to the controller object for which
* to complete the IO request.
* @param[in] remote_device The handle to the remote device object for which
* to complete the IO request.
* @param[in] io_request the handle to the io request object to complete.
*
* @return Indicate if the controller successfully completed the IO request.
* @retval SCI_SUCCESS if the completion process was successful.
*/
SCI_STATUS scic_controller_complete_io(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_IO_REQUEST_HANDLE_T io_request
);
/**
* @brief This method simply provides the user with a unique handle for a
* given SAS/SATA core port index.
*
* @param[in] controller This parameter represents the handle to the
* controller object from which to retrieve a port (SAS or
* SATA) handle.
* @param[in] port_index This parameter specifies the port index in
* the controller for which to retrieve the port handle.
* 0 <= port_index < maximum number of phys.
* @param[out] port_handle This parameter specifies the retrieved port handle
* to be provided to the caller.
*
* @return Indicate if the retrieval of the port handle was successful.
* @retval SCI_SUCCESS This value is returned if the retrieval was successful.
* @retval SCI_FAILURE_INVALID_PORT This value is returned if the supplied
* port id is not in the supported range.
*/
SCI_STATUS scic_controller_get_port_handle(
SCI_CONTROLLER_HANDLE_T controller,
U8 port_index,
SCI_PORT_HANDLE_T * port_handle
);
/**
* @brief This method simply provides the user with a unique handle for a
* given SAS/SATA phy index/identifier.
*
* @param[in] controller This parameter represents the handle to the
* controller object from which to retrieve a phy (SAS or
* SATA) handle.
* @param[in] phy_index This parameter specifies the phy index in
* the controller for which to retrieve the phy handle.
* 0 <= phy_index < maximum number of phys.
* @param[out] phy_handle This parameter specifies the retrieved phy handle
* to be provided to the caller.
*
* @return Indicate if the retrieval of the phy handle was successful.
* @retval SCI_SUCCESS This value is returned if the retrieval was successful.
* @retval SCI_FAILURE_INVALID_PHY This value is returned if the supplied phy
* id is not in the supported range.
*/
SCI_STATUS scic_controller_get_phy_handle(
SCI_CONTROLLER_HANDLE_T controller,
U8 phy_index,
SCI_PHY_HANDLE_T * phy_handle
);
/**
* @brief This method will allocate a tag from the pool of free IO tags.
* Direct allocation of IO tags by the SCI Core user is optional.
* The scic_controller_start_io() method will allocate an IO
* tag if this method is not utilized and the tag is not
* supplied to the IO construct routine. Direct allocation of IO tags
* may provide additional performance improvements in environments
* capable of supporting this usage model. Additionally, direct
* allocation of IO tags also provides additional flexibility to the
* SCI Core user. Specifically, the user may retain IO tags across
* the lives of multiple IO requests.
*
* @warning IO tags are a protected resource. It is incumbent upon the
* SCI Core user to ensure that each of the methods that may
* allocate or free available IO tags are handled in a mutually
* exclusive manner. This method is one of said methods requiring
* proper critical code section protection (e.g. semaphore,
* spin-lock, etc.).
*
* @param[in] controller the handle to the controller object for which to
* allocate the tag.
*
* @return An unsigned integer representing an available IO tag.
* @retval SCI_CONTROLLER_INVALID_IO_TAG This value is returned if there
* are no currently available tags to be allocated.
* @retval All return other values indicate a legitimate tag.
*/
U16 scic_controller_allocate_io_tag(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method will free an IO tag to the pool of free IO tags.
* This method provides the SCI Core user more flexibility with
* regards to IO tags. The user may desire to keep an IO tag after
* an IO request has completed, because they plan on re-using the
* tag for a subsequent IO request. This method is only legal if
* the tag was allocated via scic_controller_allocate_io_tag().
*
* @warning
* - IO tags are a protected resource. It is incumbent upon the
* SCI Core user to ensure that each of the methods that may
* allocate or free available IO tags are handled in a mutually
* exclusive manner. This method is one of said methods requiring
* proper critical code section protection (e.g. semaphore,
* spin-lock, etc.).
* - If the IO tag for a request was allocated, by the SCI Core user,
* using the scic_controller_allocate_io_tag() method, then it is
* the responsibility of the caller to invoke this method to free
* the tag.
*
* @param[in] controller This parameter specifies the handle to the
* controller object for which to free/return the tag.
* @param[in] io_tag This parameter represents the tag to be freed to the
* pool of available tags.
*
* @return This method returns an indication of whether the tag was
* successfully put back (freed) to the pool of available tags.
* @retval SCI_SUCCESS This return value indicates the tag was successfully
* placed into the pool of available IO tags.
* @retval SCI_FAILURE_INVALID_IO_TAG This value is returned if the supplied
* tag is not a valid IO tag value.
*/
SCI_STATUS scic_controller_free_io_tag(
SCI_CONTROLLER_HANDLE_T controller,
U16 io_tag
);
/**
* @brief This method returns the size of the core's scratch RAM.
*
* @return Size of the scratch RAM in dwords.
*/
U32 scic_controller_get_scratch_ram_size(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method allows the user to read a U32 from the core's
* scratch RAM.
*
* @param[in] controller This parameter represents the handle to the
* controller object for which to read scratch RAM.
* @param[in] offset The offset (in dwords) into the scratch RAM.
* @param[out] value The location where the read value should be stored.
*
* @return Indicate if the user specified a valid offset into the
* scratch RAM.
* @retval SCI_SUCCESS The scratch RAM was successfully read.
* @retval SCI_FAILURE_INVALID_PARAMETER_VALUE The user specified an
* invalid offset.
*/
SCI_STATUS scic_controller_read_scratch_ram_dword(
SCI_CONTROLLER_HANDLE_T controller,
U32 offset,
U32 * value
);
/**
* @brief This method allows the user to write a U32 to the core's
* scratch RAM.
*
* @param[in] controller This parameter represents the handle to the
* controller object for which to write scratch RAM.
* @param[in] offset The offset (in dwords) into the scratch RAM.
* @param[out] value The value to be written to scratch RAM.
*
* @return Indicate if the user specified a valid offset into the
* scratch RAM.
* @retval SCI_SUCCESS The scratch RAM was successfully written.
* @retval SCI_FAILURE_INVALID_PARAMETER_VALUE The user specified an
* invalid offset.
*/
SCI_STATUS scic_controller_write_scratch_ram_dword(
SCI_CONTROLLER_HANDLE_T controller,
U32 offset,
U32 value
);
/**
* @brief This method allows the user to configure the SCI core into
* either a performance mode or a memory savings mode.
*
* @param[in] controller This parameter represents the handle to the
* controller object for which to update the operating
* mode.
* @param[in] mode This parameter specifies the new mode for the
* controller.
*
* @return Indicate if the user successfully change the operating mode
* of the controller.
* @retval SCI_SUCCESS The user successfully updated the mode.
*/
SCI_STATUS scic_controller_set_mode(
SCI_CONTROLLER_HANDLE_T controller,
SCI_CONTROLLER_MODE mode
);
#if !defined(DISABLE_INTERRUPTS)
/**
* @brief This method allows the user to configure the interrupt coalescence.
*
* @param[in] controller This parameter represents the handle to the
* controller object for which its interrupt coalesce register
* is overridden.
*
* @param[in] coalesce_number Used to control the number of entries in the
* Completion Queue before an interrupt is generated. If the
* number of entries exceed this number, an interrupt will be
* generated. The valid range of the input is [0, 256].
* A setting of 0 results in coalescing being disabled.
* @param[in] coalesce_timeout Timeout value in microseconds. The valid range
* of the input is [0, 2700000] . A setting of 0 is allowed and
* results in no interrupt coalescing timeout.
*
* @return Indicate if the user successfully set the interrupt coalesce parameters.
* @retval SCI_SUCCESS The user successfully updated the interrutp coalescence.
* @retval SCI_FAILURE_INVALID_PARAMETER_VALUE The user input value is out of range.
*/
SCI_STATUS scic_controller_set_interrupt_coalescence(
SCI_CONTROLLER_HANDLE_T controller,
U32 coalesce_number,
U32 coalesce_timeout
);
/**
* @brief This method retrieves the interrupt coalescing values
*
* @param[in] controller This parameter specifies the controller for
* which its interrupt coalescing number is read.
*
* @param[out] coalesce_number, interrupt coalescing number read from controller.
*
* @param[out] coalesce_timeout, timeout value in microseconds.
*
* @return None
*/
void scic_controller_get_interrupt_coalescence(
SCI_CONTROLLER_HANDLE_T controller,
U32 * coalesce_number,
U32 * coalesce_timeout
);
#else // !defined(DISABLE_INTERRUPTS)
#define scic_controller_set_interrupt_coalescence(controller, num, timeout) \
SCI_FAILURE
#define scic_controller_get_interrupt_coalescence(controller, num, timeout)
#endif // !defined(DISABLE_INTERRUPTS)
/**
* @brief This method suspend the controller, reinitialize RAMs, then resume
* the controller.
*
* @param[in] controller This parameter specifies the controller which is transitioning.
*
* @param[in] restrict_completions This parameter specifies whether the controller should
* ignore completion processing for non-fastpath events. This will cause
* the completions to be thrown away.
*
* @return SCI_STATUS The status of controller transition.
*/
SCI_STATUS scic_controller_transition(
SCI_CONTROLLER_HANDLE_T controller,
BOOL restrict_completions
);
/**
* @brief This method suspends the controller.
*
* @param[in] controller This parameter specifies the controller which is to be suspended.
*
* @return SCI_STATUS The status of controller suspend.
*/
SCI_STATUS scic_controller_suspend(
SCI_CONTROLLER_HANDLE_T controller
);
/**
* @brief This method resumes the controller.
*
* @param[in] controller This parameter specifies the controller which is to be resumed.
*
* @return SCI_STATUS The status of controller resume.
*/
SCI_STATUS scic_controller_resume(
SCI_CONTROLLER_HANDLE_T controller
);
SCI_STATUS scic_controller_get_max_ports(
SCI_CONTROLLER_HANDLE_T controller,
U8 * count
);
SCI_STATUS scic_controller_get_max_phys(
SCI_CONTROLLER_HANDLE_T controller,
U8 * count
);
#ifdef __cplusplus
}
#endif // __cplusplus
#endif // _SCIC_CONTROLLER_H_