| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/smb/@/contrib/dev/acpica/compiler/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/i2c/smb/@/contrib/dev/acpica/compiler/aslwalks.c |
/******************************************************************************
*
* Module Name: aslwalks.c - major analytical parse tree walks
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2011, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <contrib/dev/acpica/compiler/aslcompiler.h>
#include "aslcompiler.y.h"
#include <contrib/dev/acpica/include/acparser.h>
#include <contrib/dev/acpica/include/amlcode.h>
#define _COMPONENT ACPI_COMPILER
ACPI_MODULE_NAME ("aslwalks")
/*******************************************************************************
*
* FUNCTION: AnMethodAnalysisWalkBegin
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Descending callback for the analysis walk. Check methods for:
* 1) Initialized local variables
* 2) Valid arguments
* 3) Return types
*
******************************************************************************/
ACPI_STATUS
AnMethodAnalysisWalkBegin (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
ASL_ANALYSIS_WALK_INFO *WalkInfo = (ASL_ANALYSIS_WALK_INFO *) Context;
ASL_METHOD_INFO *MethodInfo = WalkInfo->MethodStack;
ACPI_PARSE_OBJECT *Next;
UINT32 RegisterNumber;
UINT32 i;
char LocalName[] = "Local0";
char ArgName[] = "Arg0";
ACPI_PARSE_OBJECT *ArgNode;
ACPI_PARSE_OBJECT *NextType;
ACPI_PARSE_OBJECT *NextParamType;
UINT8 ActualArgs = 0;
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_METHOD:
TotalMethods++;
/* Create and init method info */
MethodInfo = UtLocalCalloc (sizeof (ASL_METHOD_INFO));
MethodInfo->Next = WalkInfo->MethodStack;
MethodInfo->Op = Op;
WalkInfo->MethodStack = MethodInfo;
/* Get the name node, ignored here */
Next = Op->Asl.Child;
/* Get the NumArguments node */
Next = Next->Asl.Next;
MethodInfo->NumArguments = (UINT8)
(((UINT8) Next->Asl.Value.Integer) & 0x07);
/* Get the SerializeRule and SyncLevel nodes, ignored here */
Next = Next->Asl.Next;
Next = Next->Asl.Next;
ArgNode = Next;
/* Get the ReturnType node */
Next = Next->Asl.Next;
NextType = Next->Asl.Child;
while (NextType)
{
/* Get and map each of the ReturnTypes */
MethodInfo->ValidReturnTypes |= AnMapObjTypeToBtype (NextType);
NextType->Asl.ParseOpcode = PARSEOP_DEFAULT_ARG;
NextType = NextType->Asl.Next;
}
/* Get the ParameterType node */
Next = Next->Asl.Next;
NextType = Next->Asl.Child;
while (NextType)
{
if (NextType->Asl.ParseOpcode == PARSEOP_DEFAULT_ARG)
{
NextParamType = NextType->Asl.Child;
while (NextParamType)
{
MethodInfo->ValidArgTypes[ActualArgs] |= AnMapObjTypeToBtype (NextParamType);
NextParamType->Asl.ParseOpcode = PARSEOP_DEFAULT_ARG;
NextParamType = NextParamType->Asl.Next;
}
}
else
{
MethodInfo->ValidArgTypes[ActualArgs] =
AnMapObjTypeToBtype (NextType);
NextType->Asl.ParseOpcode = PARSEOP_DEFAULT_ARG;
ActualArgs++;
}
NextType = NextType->Asl.Next;
}
if ((MethodInfo->NumArguments) &&
(MethodInfo->NumArguments != ActualArgs))
{
/* error: Param list did not match number of args */
}
/* Allow numarguments == 0 for Function() */
if ((!MethodInfo->NumArguments) && (ActualArgs))
{
MethodInfo->NumArguments = ActualArgs;
ArgNode->Asl.Value.Integer |= ActualArgs;
}
/*
* Actual arguments are initialized at method entry.
* All other ArgX "registers" can be used as locals, so we
* track their initialization.
*/
for (i = 0; i < MethodInfo->NumArguments; i++)
{
MethodInfo->ArgInitialized[i] = TRUE;
}
break;
case PARSEOP_METHODCALL:
if (MethodInfo &&
(Op->Asl.Node == MethodInfo->Op->Asl.Node))
{
AslError (ASL_REMARK, ASL_MSG_RECURSION, Op, Op->Asl.ExternalName);
}
break;
case PARSEOP_LOCAL0:
case PARSEOP_LOCAL1:
case PARSEOP_LOCAL2:
case PARSEOP_LOCAL3:
case PARSEOP_LOCAL4:
case PARSEOP_LOCAL5:
case PARSEOP_LOCAL6:
case PARSEOP_LOCAL7:
if (!MethodInfo)
{
/*
* Local was used outside a control method, or there was an error
* in the method declaration.
*/
AslError (ASL_REMARK, ASL_MSG_LOCAL_OUTSIDE_METHOD, Op, Op->Asl.ExternalName);
return (AE_ERROR);
}
RegisterNumber = (Op->Asl.AmlOpcode & 0x000F);
/*
* If the local is being used as a target, mark the local
* initialized
*/
if (Op->Asl.CompileFlags & NODE_IS_TARGET)
{
MethodInfo->LocalInitialized[RegisterNumber] = TRUE;
}
/*
* Otherwise, this is a reference, check if the local
* has been previously initialized.
*
* The only operator that accepts an uninitialized value is ObjectType()
*/
else if ((!MethodInfo->LocalInitialized[RegisterNumber]) &&
(Op->Asl.Parent->Asl.ParseOpcode != PARSEOP_OBJECTTYPE))
{
LocalName[strlen (LocalName) -1] = (char) (RegisterNumber + 0x30);
AslError (ASL_ERROR, ASL_MSG_LOCAL_INIT, Op, LocalName);
}
break;
case PARSEOP_ARG0:
case PARSEOP_ARG1:
case PARSEOP_ARG2:
case PARSEOP_ARG3:
case PARSEOP_ARG4:
case PARSEOP_ARG5:
case PARSEOP_ARG6:
if (!MethodInfo)
{
/*
* Arg was used outside a control method, or there was an error
* in the method declaration.
*/
AslError (ASL_REMARK, ASL_MSG_LOCAL_OUTSIDE_METHOD, Op, Op->Asl.ExternalName);
return (AE_ERROR);
}
RegisterNumber = (Op->Asl.AmlOpcode & 0x000F) - 8;
ArgName[strlen (ArgName) -1] = (char) (RegisterNumber + 0x30);
/*
* If the Arg is being used as a target, mark the local
* initialized
*/
if (Op->Asl.CompileFlags & NODE_IS_TARGET)
{
MethodInfo->ArgInitialized[RegisterNumber] = TRUE;
}
/*
* Otherwise, this is a reference, check if the Arg
* has been previously initialized.
*
* The only operator that accepts an uninitialized value is ObjectType()
*/
else if ((!MethodInfo->ArgInitialized[RegisterNumber]) &&
(Op->Asl.Parent->Asl.ParseOpcode != PARSEOP_OBJECTTYPE))
{
AslError (ASL_ERROR, ASL_MSG_ARG_INIT, Op, ArgName);
}
/* Flag this arg if it is not a "real" argument to the method */
if (RegisterNumber >= MethodInfo->NumArguments)
{
AslError (ASL_REMARK, ASL_MSG_NOT_PARAMETER, Op, ArgName);
}
break;
case PARSEOP_RETURN:
if (!MethodInfo)
{
/*
* Probably was an error in the method declaration,
* no additional error here
*/
ACPI_WARNING ((AE_INFO, "%p, No parent method", Op));
return (AE_ERROR);
}
/*
* A child indicates a possible return value. A simple Return or
* Return() is marked with NODE_IS_NULL_RETURN by the parser so
* that it is not counted as a "real" return-with-value, although
* the AML code that is actually emitted is Return(0). The AML
* definition of Return has a required parameter, so we are
* forced to convert a null return to Return(0).
*/
if ((Op->Asl.Child) &&
(Op->Asl.Child->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG) &&
(!(Op->Asl.Child->Asl.CompileFlags & NODE_IS_NULL_RETURN)))
{
MethodInfo->NumReturnWithValue++;
}
else
{
MethodInfo->NumReturnNoValue++;
}
break;
case PARSEOP_BREAK:
case PARSEOP_CONTINUE:
Next = Op->Asl.Parent;
while (Next)
{
if (Next->Asl.ParseOpcode == PARSEOP_WHILE)
{
break;
}
Next = Next->Asl.Parent;
}
if (!Next)
{
AslError (ASL_ERROR, ASL_MSG_NO_WHILE, Op, NULL);
}
break;
case PARSEOP_STALL:
/* We can range check if the argument is an integer */
if ((Op->Asl.Child->Asl.ParseOpcode == PARSEOP_INTEGER) &&
(Op->Asl.Child->Asl.Value.Integer > ACPI_UINT8_MAX))
{
AslError (ASL_ERROR, ASL_MSG_INVALID_TIME, Op, NULL);
}
break;
case PARSEOP_DEVICE:
case PARSEOP_EVENT:
case PARSEOP_MUTEX:
case PARSEOP_OPERATIONREGION:
case PARSEOP_POWERRESOURCE:
case PARSEOP_PROCESSOR:
case PARSEOP_THERMALZONE:
/*
* The first operand is a name to be created in the namespace.
* Check against the reserved list.
*/
i = ApCheckForPredefinedName (Op, Op->Asl.NameSeg);
if (i < ACPI_VALID_RESERVED_NAME_MAX)
{
AslError (ASL_ERROR, ASL_MSG_RESERVED_USE, Op, Op->Asl.ExternalName);
}
break;
case PARSEOP_NAME:
/* Typecheck any predefined names statically defined with Name() */
ApCheckForPredefinedObject (Op, Op->Asl.NameSeg);
/* Special typechecking for _HID */
if (!ACPI_STRCMP (METHOD_NAME__HID, Op->Asl.NameSeg))
{
Next = Op->Asl.Child->Asl.Next;
AnCheckId (Next, ASL_TYPE_HID);
}
/* Special typechecking for _CID */
else if (!ACPI_STRCMP (METHOD_NAME__CID, Op->Asl.NameSeg))
{
Next = Op->Asl.Child->Asl.Next;
if ((Next->Asl.ParseOpcode == PARSEOP_PACKAGE) ||
(Next->Asl.ParseOpcode == PARSEOP_VAR_PACKAGE))
{
Next = Next->Asl.Child;
while (Next)
{
AnCheckId (Next, ASL_TYPE_CID);
Next = Next->Asl.Next;
}
}
else
{
AnCheckId (Next, ASL_TYPE_CID);
}
}
break;
default:
break;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AnMethodAnalysisWalkEnd
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback for analysis walk. Complete method
* return analysis.
*
******************************************************************************/
ACPI_STATUS
AnMethodAnalysisWalkEnd (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
ASL_ANALYSIS_WALK_INFO *WalkInfo = (ASL_ANALYSIS_WALK_INFO *) Context;
ASL_METHOD_INFO *MethodInfo = WalkInfo->MethodStack;
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_METHOD:
case PARSEOP_RETURN:
if (!MethodInfo)
{
printf ("No method info for method! [%s]\n", Op->Asl.Namepath);
AslError (ASL_ERROR, ASL_MSG_COMPILER_INTERNAL, Op,
"No method info for this method");
CmCleanupAndExit ();
return (AE_AML_INTERNAL);
}
break;
default:
break;
}
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_METHOD:
WalkInfo->MethodStack = MethodInfo->Next;
/*
* Check if there is no return statement at the end of the
* method AND we can actually get there -- i.e., the execution
* of the method can possibly terminate without a return statement.
*/
if ((!AnLastStatementIsReturn (Op)) &&
(!(Op->Asl.CompileFlags & NODE_HAS_NO_EXIT)))
{
/*
* No return statement, and execution can possibly exit
* via this path. This is equivalent to Return ()
*/
MethodInfo->NumReturnNoValue++;
}
/*
* Check for case where some return statements have a return value
* and some do not. Exit without a return statement is a return with
* no value
*/
if (MethodInfo->NumReturnNoValue &&
MethodInfo->NumReturnWithValue)
{
AslError (ASL_WARNING, ASL_MSG_RETURN_TYPES, Op,
Op->Asl.ExternalName);
}
/*
* If there are any RETURN() statements with no value, or there is a
* control path that allows the method to exit without a return value,
* we mark the method as a method that does not return a value. This
* knowledge can be used to check method invocations that expect a
* returned value.
*/
if (MethodInfo->NumReturnNoValue)
{
if (MethodInfo->NumReturnWithValue)
{
Op->Asl.CompileFlags |= NODE_METHOD_SOME_NO_RETVAL;
}
else
{
Op->Asl.CompileFlags |= NODE_METHOD_NO_RETVAL;
}
}
/*
* Check predefined method names for correct return behavior
* and correct number of arguments. Also, some special checks
* For GPE and _REG methods.
*/
if (ApCheckForPredefinedMethod (Op, MethodInfo))
{
/* Special check for two names like _L01 and _E01 in same scope */
ApCheckForGpeNameConflict (Op);
/*
* Special check for _REG: Must have an operation region definition
* within the same scope!
*/
ApCheckRegMethod (Op);
}
ACPI_FREE (MethodInfo);
break;
case PARSEOP_NAME:
/* Special check for two names like _L01 and _E01 in same scope */
ApCheckForGpeNameConflict (Op);
break;
case PARSEOP_RETURN:
/*
* If the parent is a predefined method name, attempt to typecheck
* the return value. Only static types can be validated.
*/
ApCheckPredefinedReturnValue (Op, MethodInfo);
/*
* The parent block does not "exit" and continue execution -- the
* method is terminated here with the Return() statement.
*/
Op->Asl.Parent->Asl.CompileFlags |= NODE_HAS_NO_EXIT;
/* Used in the "typing" pass later */
Op->Asl.ParentMethod = MethodInfo->Op;
/*
* If there is a peer node after the return statement, then this
* node is unreachable code -- i.e., it won't be executed because of
* the preceeding Return() statement.
*/
if (Op->Asl.Next)
{
AslError (ASL_WARNING, ASL_MSG_UNREACHABLE_CODE, Op->Asl.Next, NULL);
}
break;
case PARSEOP_IF:
if ((Op->Asl.CompileFlags & NODE_HAS_NO_EXIT) &&
(Op->Asl.Next) &&
(Op->Asl.Next->Asl.ParseOpcode == PARSEOP_ELSE))
{
/*
* This IF has a corresponding ELSE. The IF block has no exit,
* (it contains an unconditional Return)
* mark the ELSE block to remember this fact.
*/
Op->Asl.Next->Asl.CompileFlags |= NODE_IF_HAS_NO_EXIT;
}
break;
case PARSEOP_ELSE:
if ((Op->Asl.CompileFlags & NODE_HAS_NO_EXIT) &&
(Op->Asl.CompileFlags & NODE_IF_HAS_NO_EXIT))
{
/*
* This ELSE block has no exit and the corresponding IF block
* has no exit either. Therefore, the parent node has no exit.
*/
Op->Asl.Parent->Asl.CompileFlags |= NODE_HAS_NO_EXIT;
}
break;
default:
if ((Op->Asl.CompileFlags & NODE_HAS_NO_EXIT) &&
(Op->Asl.Parent))
{
/* If this node has no exit, then the parent has no exit either */
Op->Asl.Parent->Asl.CompileFlags |= NODE_HAS_NO_EXIT;
}
break;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AnMethodTypingWalkEnd
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback for typing walk. Complete the method
* return analysis. Check methods for:
* 1) Initialized local variables
* 2) Valid arguments
* 3) Return types
*
******************************************************************************/
ACPI_STATUS
AnMethodTypingWalkEnd (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
UINT32 ThisNodeBtype;
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_METHOD:
Op->Asl.CompileFlags |= NODE_METHOD_TYPED;
break;
case PARSEOP_RETURN:
if ((Op->Asl.Child) &&
(Op->Asl.Child->Asl.ParseOpcode != PARSEOP_DEFAULT_ARG))
{
ThisNodeBtype = AnGetBtype (Op->Asl.Child);
if ((Op->Asl.Child->Asl.ParseOpcode == PARSEOP_METHODCALL) &&
(ThisNodeBtype == (ACPI_UINT32_MAX -1)))
{
/*
* The called method is untyped at this time (typically a
* forward reference).
*
* Check for a recursive method call first.
*/
if (Op->Asl.ParentMethod != Op->Asl.Child->Asl.Node->Op)
{
/* We must type the method here */
TrWalkParseTree (Op->Asl.Child->Asl.Node->Op,
ASL_WALK_VISIT_UPWARD, NULL,
AnMethodTypingWalkEnd, NULL);
ThisNodeBtype = AnGetBtype (Op->Asl.Child);
}
}
/* Returns a value, save the value type */
if (Op->Asl.ParentMethod)
{
Op->Asl.ParentMethod->Asl.AcpiBtype |= ThisNodeBtype;
}
}
break;
default:
break;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AnOperandTypecheckWalkEnd
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback for analysis walk. Complete method
* return analysis.
*
******************************************************************************/
ACPI_STATUS
AnOperandTypecheckWalkEnd (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
const ACPI_OPCODE_INFO *OpInfo;
UINT32 RuntimeArgTypes;
UINT32 RuntimeArgTypes2;
UINT32 RequiredBtypes;
UINT32 ThisNodeBtype;
UINT32 CommonBtypes;
UINT32 OpcodeClass;
ACPI_PARSE_OBJECT *ArgOp;
UINT32 ArgType;
switch (Op->Asl.AmlOpcode)
{
case AML_RAW_DATA_BYTE:
case AML_RAW_DATA_WORD:
case AML_RAW_DATA_DWORD:
case AML_RAW_DATA_QWORD:
case AML_RAW_DATA_BUFFER:
case AML_RAW_DATA_CHAIN:
case AML_PACKAGE_LENGTH:
case AML_UNASSIGNED_OPCODE:
case AML_DEFAULT_ARG_OP:
/* Ignore the internal (compiler-only) AML opcodes */
return (AE_OK);
default:
break;
}
OpInfo = AcpiPsGetOpcodeInfo (Op->Asl.AmlOpcode);
if (!OpInfo)
{
return (AE_OK);
}
ArgOp = Op->Asl.Child;
RuntimeArgTypes = OpInfo->RuntimeArgs;
OpcodeClass = OpInfo->Class;
#ifdef ASL_ERROR_NAMED_OBJECT_IN_WHILE
/*
* Update 11/2008: In practice, we can't perform this check. A simple
* analysis is not sufficient. Also, it can cause errors when compiling
* disassembled code because of the way Switch operators are implemented
* (a While(One) loop with a named temp variable created within.)
*/
/*
* If we are creating a named object, check if we are within a while loop
* by checking if the parent is a WHILE op. This is a simple analysis, but
* probably sufficient for many cases.
*
* Allow Scope(), Buffer(), and Package().
*/
if (((OpcodeClass == AML_CLASS_NAMED_OBJECT) && (Op->Asl.AmlOpcode != AML_SCOPE_OP)) ||
((OpcodeClass == AML_CLASS_CREATE) && (OpInfo->Flags & AML_NSNODE)))
{
if (Op->Asl.Parent->Asl.AmlOpcode == AML_WHILE_OP)
{
AslError (ASL_ERROR, ASL_MSG_NAMED_OBJECT_IN_WHILE, Op, NULL);
}
}
#endif
/*
* Special case for control opcodes IF/RETURN/WHILE since they
* have no runtime arg list (at this time)
*/
switch (Op->Asl.AmlOpcode)
{
case AML_IF_OP:
case AML_WHILE_OP:
case AML_RETURN_OP:
if (ArgOp->Asl.ParseOpcode == PARSEOP_METHODCALL)
{
/* Check for an internal method */
if (AnIsInternalMethod (ArgOp))
{
return (AE_OK);
}
/* The lone arg is a method call, check it */
RequiredBtypes = AnMapArgTypeToBtype (ARGI_INTEGER);
if (Op->Asl.AmlOpcode == AML_RETURN_OP)
{
RequiredBtypes = 0xFFFFFFFF;
}
ThisNodeBtype = AnGetBtype (ArgOp);
if (ThisNodeBtype == ACPI_UINT32_MAX)
{
return (AE_OK);
}
AnCheckMethodReturnValue (Op, OpInfo, ArgOp,
RequiredBtypes, ThisNodeBtype);
}
return (AE_OK);
default:
break;
}
/* Ignore the non-executable opcodes */
if (RuntimeArgTypes == ARGI_INVALID_OPCODE)
{
return (AE_OK);
}
switch (OpcodeClass)
{
case AML_CLASS_EXECUTE:
case AML_CLASS_CREATE:
case AML_CLASS_CONTROL:
case AML_CLASS_RETURN_VALUE:
/* TBD: Change class or fix typechecking for these */
if ((Op->Asl.AmlOpcode == AML_BUFFER_OP) ||
(Op->Asl.AmlOpcode == AML_PACKAGE_OP) ||
(Op->Asl.AmlOpcode == AML_VAR_PACKAGE_OP))
{
break;
}
/* Reverse the runtime argument list */
RuntimeArgTypes2 = 0;
while ((ArgType = GET_CURRENT_ARG_TYPE (RuntimeArgTypes)))
{
RuntimeArgTypes2 <<= ARG_TYPE_WIDTH;
RuntimeArgTypes2 |= ArgType;
INCREMENT_ARG_LIST (RuntimeArgTypes);
}
while ((ArgType = GET_CURRENT_ARG_TYPE (RuntimeArgTypes2)))
{
RequiredBtypes = AnMapArgTypeToBtype (ArgType);
ThisNodeBtype = AnGetBtype (ArgOp);
if (ThisNodeBtype == ACPI_UINT32_MAX)
{
goto NextArgument;
}
/* Examine the arg based on the required type of the arg */
switch (ArgType)
{
case ARGI_TARGETREF:
if (ArgOp->Asl.ParseOpcode == PARSEOP_ZERO)
{
/* ZERO is the placeholder for "don't store result" */
ThisNodeBtype = RequiredBtypes;
break;
}
if (ArgOp->Asl.ParseOpcode == PARSEOP_INTEGER)
{
/*
* This is the case where an original reference to a resource
* descriptor field has been replaced by an (Integer) offset.
* These named fields are supported at compile-time only;
* the names are not passed to the interpreter (via the AML).
*/
if ((ArgOp->Asl.Node->Type == ACPI_TYPE_LOCAL_RESOURCE_FIELD) ||
(ArgOp->Asl.Node->Type == ACPI_TYPE_LOCAL_RESOURCE))
{
AslError (ASL_ERROR, ASL_MSG_RESOURCE_FIELD, ArgOp, NULL);
}
else
{
AslError (ASL_ERROR, ASL_MSG_INVALID_TYPE, ArgOp, NULL);
}
break;
}
if ((ArgOp->Asl.ParseOpcode == PARSEOP_METHODCALL) ||
(ArgOp->Asl.ParseOpcode == PARSEOP_DEREFOF))
{
break;
}
ThisNodeBtype = RequiredBtypes;
break;
case ARGI_REFERENCE: /* References */
case ARGI_INTEGER_REF:
case ARGI_OBJECT_REF:
case ARGI_DEVICE_REF:
switch (ArgOp->Asl.ParseOpcode)
{
case PARSEOP_LOCAL0:
case PARSEOP_LOCAL1:
case PARSEOP_LOCAL2:
case PARSEOP_LOCAL3:
case PARSEOP_LOCAL4:
case PARSEOP_LOCAL5:
case PARSEOP_LOCAL6:
case PARSEOP_LOCAL7:
/* TBD: implement analysis of current value (type) of the local */
/* For now, just treat any local as a typematch */
/*ThisNodeBtype = RequiredBtypes;*/
break;
case PARSEOP_ARG0:
case PARSEOP_ARG1:
case PARSEOP_ARG2:
case PARSEOP_ARG3:
case PARSEOP_ARG4:
case PARSEOP_ARG5:
case PARSEOP_ARG6:
/* Hard to analyze argument types, sow we won't */
/* For now, just treat any arg as a typematch */
/* ThisNodeBtype = RequiredBtypes; */
break;
case PARSEOP_DEBUG:
break;
case PARSEOP_REFOF:
case PARSEOP_INDEX:
default:
break;
}
break;
case ARGI_INTEGER:
default:
break;
}
CommonBtypes = ThisNodeBtype & RequiredBtypes;
if (ArgOp->Asl.ParseOpcode == PARSEOP_METHODCALL)
{
if (AnIsInternalMethod (ArgOp))
{
return (AE_OK);
}
/* Check a method call for a valid return value */
AnCheckMethodReturnValue (Op, OpInfo, ArgOp,
RequiredBtypes, ThisNodeBtype);
}
/*
* Now check if the actual type(s) match at least one
* bit to the required type
*/
else if (!CommonBtypes)
{
/* No match -- this is a type mismatch error */
AnFormatBtype (StringBuffer, ThisNodeBtype);
AnFormatBtype (StringBuffer2, RequiredBtypes);
sprintf (MsgBuffer, "[%s] found, %s operator requires [%s]",
StringBuffer, OpInfo->Name, StringBuffer2);
AslError (ASL_ERROR, ASL_MSG_INVALID_TYPE, ArgOp, MsgBuffer);
}
NextArgument:
ArgOp = ArgOp->Asl.Next;
INCREMENT_ARG_LIST (RuntimeArgTypes2);
}
break;
default:
break;
}
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: AnOtherSemanticAnalysisWalkBegin
*
* PARAMETERS: ASL_WALK_CALLBACK
*
* RETURN: Status
*
* DESCRIPTION: Descending callback for the analysis walk. Checks for
* miscellaneous issues in the code.
*
******************************************************************************/
ACPI_STATUS
AnOtherSemanticAnalysisWalkBegin (
ACPI_PARSE_OBJECT *Op,
UINT32 Level,
void *Context)
{
ACPI_PARSE_OBJECT *ArgNode;
ACPI_PARSE_OBJECT *PrevArgNode = NULL;
const ACPI_OPCODE_INFO *OpInfo;
OpInfo = AcpiPsGetOpcodeInfo (Op->Asl.AmlOpcode);
/*
* Determine if an execution class operator actually does something by
* checking if it has a target and/or the function return value is used.
* (Target is optional, so a standalone statement can actually do nothing.)
*/
if ((OpInfo->Class == AML_CLASS_EXECUTE) &&
(OpInfo->Flags & AML_HAS_RETVAL) &&
(!AnIsResultUsed (Op)))
{
if (OpInfo->Flags & AML_HAS_TARGET)
{
/*
* Find the target node, it is always the last child. If the traget
* is not specified in the ASL, a default node of type Zero was
* created by the parser.
*/
ArgNode = Op->Asl.Child;
while (ArgNode->Asl.Next)
{
PrevArgNode = ArgNode;
ArgNode = ArgNode->Asl.Next;
}
/* Divide() is the only weird case, it has two targets */
if (Op->Asl.AmlOpcode == AML_DIVIDE_OP)
{
if ((ArgNode->Asl.ParseOpcode == PARSEOP_ZERO) &&
(PrevArgNode) &&
(PrevArgNode->Asl.ParseOpcode == PARSEOP_ZERO))
{
AslError (ASL_WARNING, ASL_MSG_RESULT_NOT_USED,
Op, Op->Asl.ExternalName);
}
}
else if (ArgNode->Asl.ParseOpcode == PARSEOP_ZERO)
{
AslError (ASL_WARNING, ASL_MSG_RESULT_NOT_USED,
Op, Op->Asl.ExternalName);
}
}
else
{
/*
* Has no target and the result is not used. Only a couple opcodes
* can have this combination.
*/
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_ACQUIRE:
case PARSEOP_WAIT:
case PARSEOP_LOADTABLE:
break;
default:
AslError (ASL_WARNING, ASL_MSG_RESULT_NOT_USED,
Op, Op->Asl.ExternalName);
break;
}
}
}
/*
* Semantic checks for individual ASL operators
*/
switch (Op->Asl.ParseOpcode)
{
case PARSEOP_ACQUIRE:
case PARSEOP_WAIT:
/*
* Emit a warning if the timeout parameter for these operators is not
* ACPI_WAIT_FOREVER, and the result value from the operator is not
* checked, meaning that a timeout could happen, but the code
* would not know about it.
*/
/* First child is the namepath, 2nd child is timeout */
ArgNode = Op->Asl.Child;
ArgNode = ArgNode->Asl.Next;
/*
* Check for the WAIT_FOREVER case - defined by the ACPI spec to be
* 0xFFFF or greater
*/
if (((ArgNode->Asl.ParseOpcode == PARSEOP_WORDCONST) ||
(ArgNode->Asl.ParseOpcode == PARSEOP_INTEGER)) &&
(ArgNode->Asl.Value.Integer >= (UINT64) ACPI_WAIT_FOREVER))
{
break;
}
/*
* The operation could timeout. If the return value is not used
* (indicates timeout occurred), issue a warning
*/
if (!AnIsResultUsed (Op))
{
AslError (ASL_WARNING, ASL_MSG_TIMEOUT, ArgNode,
Op->Asl.ExternalName);
}
break;
case PARSEOP_CREATEFIELD:
/*
* Check for a zero Length (NumBits) operand. NumBits is the 3rd operand
*/
ArgNode = Op->Asl.Child;
ArgNode = ArgNode->Asl.Next;
ArgNode = ArgNode->Asl.Next;
if ((ArgNode->Asl.ParseOpcode == PARSEOP_ZERO) ||
((ArgNode->Asl.ParseOpcode == PARSEOP_INTEGER) &&
(ArgNode->Asl.Value.Integer == 0)))
{
AslError (ASL_ERROR, ASL_MSG_NON_ZERO, ArgNode, NULL);
}
break;
default:
break;
}
return (AE_OK);
}