Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bluetooth/socket/@/dev/ath/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/bluetooth/socket/@/dev/ath/ah_osdep.c |
/*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any * redistribution must be conditioned upon including a substantially * similar Disclaimer requirement for further binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGES. * * $FreeBSD: release/9.1.0/sys/dev/ath/ah_osdep.c 224045 2011-07-14 23:30:30Z adrian $ */ #include "opt_ah.h" #include <sys/param.h> #include <sys/systm.h> #include <sys/kernel.h> #include <sys/module.h> #include <sys/sysctl.h> #include <sys/bus.h> #include <sys/malloc.h> #include <sys/proc.h> #include <machine/stdarg.h> #include <net/ethernet.h> /* XXX for ether_sprintf */ #include <dev/ath/ath_hal/ah.h> /* * WiSoC boards overload the bus tag with information about the * board layout. We must extract the bus space tag from that * indirect structure. For everyone else the tag is passed in * directly. * XXX cache indirect ref privately */ #ifdef AH_SUPPORT_AR5312 #define BUSTAG(ah) \ ((bus_space_tag_t) ((struct ar531x_config *)((ah)->ah_st))->tag) #else #define BUSTAG(ah) ((ah)->ah_st) #endif extern void ath_hal_printf(struct ath_hal *, const char*, ...) __printflike(2,3); extern void ath_hal_vprintf(struct ath_hal *, const char*, __va_list) __printflike(2, 0); extern const char* ath_hal_ether_sprintf(const u_int8_t *mac); extern void *ath_hal_malloc(size_t); extern void ath_hal_free(void *); #ifdef AH_ASSERT extern void ath_hal_assert_failed(const char* filename, int lineno, const char* msg); #endif #ifdef AH_DEBUG extern void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...); #endif /* AH_DEBUG */ /* NB: put this here instead of the driver to avoid circular references */ SYSCTL_NODE(_hw, OID_AUTO, ath, CTLFLAG_RD, 0, "Atheros driver parameters"); SYSCTL_NODE(_hw_ath, OID_AUTO, hal, CTLFLAG_RD, 0, "Atheros HAL parameters"); #ifdef AH_DEBUG int ath_hal_debug = 0; SYSCTL_INT(_hw_ath_hal, OID_AUTO, debug, CTLFLAG_RW, &ath_hal_debug, 0, "Atheros HAL debugging printfs"); TUNABLE_INT("hw.ath.hal.debug", &ath_hal_debug); #endif /* AH_DEBUG */ MALLOC_DEFINE(M_ATH_HAL, "ath_hal", "ath hal data"); void* ath_hal_malloc(size_t size) { return malloc(size, M_ATH_HAL, M_NOWAIT | M_ZERO); } void ath_hal_free(void* p) { free(p, M_ATH_HAL); } void ath_hal_vprintf(struct ath_hal *ah, const char* fmt, va_list ap) { vprintf(fmt, ap); } void ath_hal_printf(struct ath_hal *ah, const char* fmt, ...) { va_list ap; va_start(ap, fmt); ath_hal_vprintf(ah, fmt, ap); va_end(ap); } const char* ath_hal_ether_sprintf(const u_int8_t *mac) { return ether_sprintf(mac); } #ifdef AH_DEBUG /* This must match the definition in ath_hal/ah_debug.h */ #define HAL_DEBUG_UNMASKABLE 0xf0000000 void DO_HALDEBUG(struct ath_hal *ah, u_int mask, const char* fmt, ...) { if ((mask == HAL_DEBUG_UNMASKABLE) || (ah->ah_config.ah_debug & mask) || (ath_hal_debug & mask)) { __va_list ap; va_start(ap, fmt); ath_hal_vprintf(ah, fmt, ap); va_end(ap); } } #undef HAL_DEBUG_UNMASKABLE #endif /* AH_DEBUG */ #ifdef AH_DEBUG_ALQ /* * ALQ register tracing support. * * Setting hw.ath.hal.alq=1 enables tracing of all register reads and * writes to the file /tmp/ath_hal.log. The file format is a simple * fixed-size array of records. When done logging set hw.ath.hal.alq=0 * and then decode the file with the arcode program (that is part of the * HAL). If you start+stop tracing the data will be appended to an * existing file. * * NB: doesn't handle multiple devices properly; only one DEVICE record * is emitted and the different devices are not identified. */ #include <sys/alq.h> #include <sys/pcpu.h> #include <dev/ath/ath_hal/ah_decode.h> static struct alq *ath_hal_alq; static int ath_hal_alq_emitdev; /* need to emit DEVICE record */ static u_int ath_hal_alq_lost; /* count of lost records */ static char ath_hal_logfile[MAXPATHLEN] = "/tmp/ath_hal.log"; SYSCTL_STRING(_hw_ath_hal, OID_AUTO, alq_logfile, CTLFLAG_RW, &ath_hal_logfile, sizeof(kernelname), "Name of ALQ logfile"); static u_int ath_hal_alq_qsize = 64*1024; static int ath_hal_setlogging(int enable) { int error; if (enable) { error = alq_open(&ath_hal_alq, ath_hal_logfile, curthread->td_ucred, ALQ_DEFAULT_CMODE, sizeof (struct athregrec), ath_hal_alq_qsize); ath_hal_alq_lost = 0; ath_hal_alq_emitdev = 1; printf("ath_hal: logging to %s enabled\n", ath_hal_logfile); } else { if (ath_hal_alq) alq_close(ath_hal_alq); ath_hal_alq = NULL; printf("ath_hal: logging disabled\n"); error = 0; } return (error); } static int sysctl_hw_ath_hal_log(SYSCTL_HANDLER_ARGS) { int error, enable; enable = (ath_hal_alq != NULL); error = sysctl_handle_int(oidp, &enable, 0, req); if (error || !req->newptr) return (error); else return (ath_hal_setlogging(enable)); } SYSCTL_PROC(_hw_ath_hal, OID_AUTO, alq, CTLTYPE_INT|CTLFLAG_RW, 0, 0, sysctl_hw_ath_hal_log, "I", "Enable HAL register logging"); SYSCTL_INT(_hw_ath_hal, OID_AUTO, alq_size, CTLFLAG_RW, &ath_hal_alq_qsize, 0, "In-memory log size (#records)"); SYSCTL_INT(_hw_ath_hal, OID_AUTO, alq_lost, CTLFLAG_RW, &ath_hal_alq_lost, 0, "Register operations not logged"); static struct ale * ath_hal_alq_get(struct ath_hal *ah) { struct ale *ale; if (ath_hal_alq_emitdev) { ale = alq_get(ath_hal_alq, ALQ_NOWAIT); if (ale) { struct athregrec *r = (struct athregrec *) ale->ae_data; r->op = OP_DEVICE; r->reg = 0; r->val = ah->ah_devid; alq_post(ath_hal_alq, ale); ath_hal_alq_emitdev = 0; } else ath_hal_alq_lost++; } ale = alq_get(ath_hal_alq, ALQ_NOWAIT); if (!ale) ath_hal_alq_lost++; return ale; } void ath_hal_reg_write(struct ath_hal *ah, u_int32_t reg, u_int32_t val) { bus_space_tag_t tag = BUSTAG(ah); bus_space_handle_t h = ah->ah_sh; if (ath_hal_alq) { struct ale *ale = ath_hal_alq_get(ah); if (ale) { struct athregrec *r = (struct athregrec *) ale->ae_data; r->op = OP_WRITE; r->reg = reg; r->val = val; alq_post(ath_hal_alq, ale); } } #if _BYTE_ORDER == _BIG_ENDIAN if (OS_REG_UNSWAPPED(reg)) bus_space_write_4(tag, h, reg, val); else #endif bus_space_write_stream_4(tag, h, reg, val); } u_int32_t ath_hal_reg_read(struct ath_hal *ah, u_int32_t reg) { bus_space_tag_t tag = BUSTAG(ah); bus_space_handle_t h = ah->ah_sh; u_int32_t val; #if _BYTE_ORDER == _BIG_ENDIAN if (OS_REG_UNSWAPPED(reg)) val = bus_space_read_4(tag, h, reg); else #endif val = bus_space_read_stream_4(tag, h, reg); if (ath_hal_alq) { struct ale *ale = ath_hal_alq_get(ah); if (ale) { struct athregrec *r = (struct athregrec *) ale->ae_data; r->op = OP_READ; r->reg = reg; r->val = val; alq_post(ath_hal_alq, ale); } } return val; } void OS_MARK(struct ath_hal *ah, u_int id, u_int32_t v) { if (ath_hal_alq) { struct ale *ale = ath_hal_alq_get(ah); if (ale) { struct athregrec *r = (struct athregrec *) ale->ae_data; r->op = OP_MARK; r->reg = id; r->val = v; alq_post(ath_hal_alq, ale); } } } #elif defined(AH_DEBUG) || defined(AH_REGOPS_FUNC) /* * Memory-mapped device register read/write. These are here * as routines when debugging support is enabled and/or when * explicitly configured to use function calls. The latter is * for architectures that might need to do something before * referencing memory (e.g. remap an i/o window). * * NB: see the comments in ah_osdep.h about byte-swapping register * reads and writes to understand what's going on below. */ void ath_hal_reg_write(struct ath_hal *ah, u_int32_t reg, u_int32_t val) { bus_space_tag_t tag = BUSTAG(ah); bus_space_handle_t h = ah->ah_sh; #if _BYTE_ORDER == _BIG_ENDIAN if (OS_REG_UNSWAPPED(reg)) bus_space_write_4(tag, h, reg, val); else #endif bus_space_write_stream_4(tag, h, reg, val); } u_int32_t ath_hal_reg_read(struct ath_hal *ah, u_int32_t reg) { bus_space_tag_t tag = BUSTAG(ah); bus_space_handle_t h = ah->ah_sh; u_int32_t val; #if _BYTE_ORDER == _BIG_ENDIAN if (OS_REG_UNSWAPPED(reg)) val = bus_space_read_4(tag, h, reg); else #endif val = bus_space_read_stream_4(tag, h, reg); return val; } #endif /* AH_DEBUG || AH_REGOPS_FUNC */ #ifdef AH_ASSERT void ath_hal_assert_failed(const char* filename, int lineno, const char *msg) { printf("Atheros HAL assertion failure: %s: line %u: %s\n", filename, lineno, msg); panic("ath_hal_assert"); } #endif /* AH_ASSERT */