| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/zlib/@/dev/aic/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mlx/@/amd64/compile/hs32/modules/usr/src/sys/modules/zlib/@/dev/aic/aic6360reg.h |
/*- * Copyright (c) 1994 Charles Hannum. * Copyright (c) 1994 Jarle Greipsland. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Jarle Greipsland * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/dev/aic/aic6360reg.h 139749 2005-01-06 01:43:34Z imp $ */ #define SCSISEQ 0x00 /* SCSI sequence control */ #define SXFRCTL0 0x01 /* SCSI transfer control 0 */ #define SXFRCTL1 0x02 /* SCSI transfer control 1 */ #define SCSISIGI 0x03 /* SCSI signal in */ #define SCSISIGO 0x03 /* SCSI signal out */ #define SCSIRATE 0x04 /* SCSI rate control */ #define SCSIID 0x05 /* SCSI ID */ #define SELID 0x05 /* Selection/Reselection ID */ #define SCSIDAT 0x06 /* SCSI Latched Data */ #define SCSIBUS 0x07 /* SCSI Data Bus*/ #define STCNT0 0x08 /* SCSI transfer count */ #define STCNT1 0x09 #define STCNT2 0x0a #define CLRSINT0 0x0b /* Clear SCSI interrupts 0 */ #define SSTAT0 0x0b /* SCSI interrupt status 0 */ #define CLRSINT1 0x0c /* Clear SCSI interrupts 1 */ #define SSTAT1 0x0c /* SCSI status 1 */ #define SSTAT2 0x0d /* SCSI status 2 */ #define SCSITEST 0x0e /* SCSI test control */ #define SSTAT3 0x0e /* SCSI status 3 */ #define CLRSERR 0x0f /* Clear SCSI errors */ #define SSTAT4 0x0f /* SCSI status 4 */ #define SIMODE0 0x10 /* SCSI interrupt mode 0 */ #define SIMODE1 0x11 /* SCSI interrupt mode 1 */ #define DMACNTRL0 0x12 /* DMA control 0 */ #define DMACNTRL1 0x13 /* DMA control 1 */ #define DMASTAT 0x14 /* DMA status */ #define FIFOSTAT 0x15 /* FIFO status */ #define DMADATA 0x16 /* DMA data */ #define DMADATAL 0x16 /* DMA data low byte */ #define DMADATAH 0x17 /* DMA data high byte */ #define BRSTCNTRL 0x18 /* Burst Control */ #define DMADATALONG 0x18 #define PORTA 0x1a /* Port A */ #define PORTB 0x1b /* Port B */ #define REV 0x1c /* Revision (001 for 6360) */ #define STACK 0x1d /* Stack */ #define TEST 0x1e /* Test register */ #define ID 0x1f /* ID register */ #define IDSTRING_AIC6360 "(C)1991ADAPTECAIC6360 " #define IDSTRING_AIC6370 "(C)1994ADAPTECAIC6370" #define IDSTRING_GM82C700 "(C)1993 GoldStarGM82C700 " /* What all the bits do */ /* SCSISEQ */ #define TEMODEO 0x80 #define ENSELO 0x40 #define ENSELI 0x20 #define ENRESELI 0x10 #define ENAUTOATNO 0x08 #define ENAUTOATNI 0x04 #define ENAUTOATNP 0x02 #define SCSIRSTO 0x01 /* SXFRCTL0 */ #define SCSIEN 0x80 #define DMAEN 0x40 #define CHEN 0x20 #define CLRSTCNT 0x10 #define SPIOEN 0x08 #define CLRCH 0x02 /* SXFRCTL1 */ #define BITBUCKET 0x80 #define SWRAPEN 0x40 #define ENSPCHK 0x20 #define STIMESEL1 0x10 #define STIMESEL0 0x08 #define STIMO_256ms 0x00 #define STIMO_128ms 0x08 #define STIMO_64ms 0x10 #define STIMO_32ms 0x18 #define ENSTIMER 0x04 #define BYTEALIGN 0x02 /* SCSISIGI */ #define CDI 0x80 #define IOI 0x40 #define MSGI 0x20 #define ATNI 0x10 #define SELI 0x08 #define BSYI 0x04 #define REQI 0x02 #define ACKI 0x01 /* Important! The 3 most significant bits of this register, in initiator mode, * represents the "expected" SCSI bus phase and can be used to trigger phase * mismatch and phase change interrupts. But more important: If there is a * phase mismatch the chip will not transfer any data! This is actually a nice * feature as it gives us a bit more control over what is happening when we are * bursting data (in) through the FIFOs and the phase suddenly changes from * DATA IN to STATUS or MESSAGE IN. The transfer will stop and wait for the * proper phase to be set in this register instead of dumping the bits into the * FIFOs. */ /* SCSISIGO */ #define CDO 0x80 #define IOO 0x40 #define MSGO 0x20 #define ATNO 0x10 #define SELO 0x08 #define BSYO 0x04 #define REQO 0x02 #define ACKO 0x01 /* Information transfer phases */ #define PH_DATAOUT (0) #define PH_DATAIN (IOI) #define PH_CMD (CDI) #define PH_STAT (CDI|IOI) #define PH_MSGOUT (MSGI|CDI) #define PH_MSGIN (MSGI|CDI|IOI) #define PH_MASK (MSGI|CDI|IOI) /* SCSIRATE */ #define SXFR2 0x40 #define SXFR1 0x20 #define SXFR0 0x10 #define SOFS3 0x08 #define SOFS2 0x04 #define SOFS1 0x02 #define SOFS0 0x01 /* SCSI ID */ #define OID2 0x40 #define OID1 0x20 #define OID0 0x10 #define OID_S 4 /* shift value */ #define TID2 0x04 #define TID1 0x02 #define TID0 0x01 #define SCSI_ID_MASK 0x7 /* SCSI selection/reselection ID (both target *and* initiator) */ #define SELID7 0x80 #define SELID6 0x40 #define SELID5 0x20 #define SELID4 0x10 #define SELID3 0x08 #define SELID2 0x04 #define SELID1 0x02 #define SELID0 0x01 /* CLRSINT0 Clears what? (interrupt and/or status bit) */ #define SETSDONE 0x80 #define CLRSELDO 0x40 /* I */ #define CLRSELDI 0x20 /* I+ */ #define CLRSELINGO 0x10 /* I */ #define CLRSWRAP 0x08 /* I+S */ #define CLRSDONE 0x04 /* I+S */ #define CLRSPIORDY 0x02 /* I */ #define CLRDMADONE 0x01 /* I */ /* SSTAT0 Howto clear */ #define TARGET 0x80 #define SELDO 0x40 /* Selfclearing */ #define SELDI 0x20 /* Selfclearing when CLRSELDI is set */ #define SELINGO 0x10 /* Selfclearing */ #define SWRAP 0x08 /* CLRSWAP */ #define SDONE 0x04 /* Not used in initiator mode */ #define SPIORDY 0x02 /* Selfclearing (op on SCSIDAT) */ #define DMADONE 0x01 /* Selfclearing (all FIFOs empty & T/C */ /* CLRSINT1 Clears what? */ #define CLRSELTIMO 0x80 /* I+S */ #define CLRATNO 0x40 #define CLRSCSIRSTI 0x20 /* I+S */ #define CLRBUSFREE 0x08 /* I+S */ #define CLRSCSIPERR 0x04 /* I+S */ #define CLRPHASECHG 0x02 /* I+S */ #define CLRREQINIT 0x01 /* I+S */ /* SSTAT1 How to clear? When set?*/ #define SELTO 0x80 /* C select out timeout */ #define ATNTARG 0x40 /* Not used in initiator mode */ #define SCSIRSTI 0x20 /* C RST asserted */ #define PHASEMIS 0x10 /* Selfclearing */ #define BUSFREE 0x08 /* C bus free condition */ #define SCSIPERR 0x04 /* C parity error on inbound data */ #define PHASECHG 0x02 /* C phase in SCSISIGI doesn't match */ #define REQINIT 0x01 /* C or ACK asserting edge of REQ */ /* SSTAT2 */ #define SOFFSET 0x20 #define SEMPTY 0x10 #define SFULL 0x08 #define SFCNT2 0x04 #define SFCNT1 0x02 #define SFCNT0 0x01 /* SCSITEST */ #define SCTESTU 0x08 #define SCTESTD 0x04 #define STCTEST 0x01 /* SSTAT3 */ #define SCSICNT3 0x80 #define SCSICNT2 0x40 #define SCSICNT1 0x20 #define SCSICNT0 0x10 #define OFFCNT3 0x08 #define OFFCNT2 0x04 #define OFFCNT1 0x02 #define OFFCNT0 0x01 /* CLRSERR */ #define CLRSYNCERR 0x04 #define CLRFWERR 0x02 #define CLRFRERR 0x01 /* SSTAT4 */ #define SYNCERR 0x04 #define FWERR 0x02 #define FRERR 0x01 /* SIMODE0 */ #define ENSELDO 0x40 #define ENSELDI 0x20 #define ENSELINGO 0x10 #define ENSWRAP 0x08 #define ENSDONE 0x04 #define ENSPIORDY 0x02 #define ENDMADONE 0x01 /* SIMODE1 */ #define ENSELTIMO 0x80 #define ENATNTARG 0x40 #define ENSCSIRST 0x20 #define ENPHASEMIS 0x10 #define ENBUSFREE 0x08 #define ENSCSIPERR 0x04 #define ENPHASECHG 0x02 #define ENREQINIT 0x01 /* DMACNTRL0 */ #define ENDMA 0x80 #define B8MODE 0x40 #define DMA 0x20 #define DWORDPIO 0x10 #define WRITE 0x08 #define INTEN 0x04 #define RSTFIFO 0x02 #define SWINT 0x01 /* DMACNTRL1 */ #define PWRDWN 0x80 #define ENSTK32 0x40 #define STK4 0x10 #define STK3 0x08 #define STK2 0x04 #define STK1 0x02 #define STK0 0x01 /* DMASTAT */ #define ATDONE 0x80 #define WORDRDY 0x40 #define INTSTAT 0x20 #define DFIFOFULL 0x10 #define DFIFOEMP 0x08 #define DFIFOHF 0x04 #define DWORDRDY 0x02 /* BRSTCNTRL */ #define BON3 0x80 #define BON2 0x40 #define BON1 0x20 #define BON0 0x10 #define BOFF3 0x08 #define BOFF2 0x04 #define BOFF1 0x02 #define BOFF0 0x01 /* TEST */ #define BOFFTMR 0x40 #define BONTMR 0x20 #define STCNTH 0x10 #define STCNTM 0x08 #define STCNTL 0x04 #define SCSIBLK 0x02 #define DMABLK 0x01 /* PORTA */ #define PORTA_ID(a) ((a) & 7) #define PORTA_IRQ(a) ((((a) >> 3) & 3) + 9) #define PORTA_DRQ(a) ((((a) >> 5) & 3) ? (((a) >> 5) & 3) + 4 : 0) #define PORTA_PARITY(a) ((a) & 0x80) /* PORTB */ #define PORTB_EXTTRAN(b)((b) & 1) #define PORTB_DISC(b) ((b) & 4) #define PORTB_SYNC(b) ((b) & 8) #define PORTB_FSYNC(b) ((b) & 0x10) #define PORTB_BOOT(b) ((b) & 0x40) #define PORTB_DMA(b) ((b) & 0x80) /* How to behave on the (E)ISA bus when/if DMAing (on<<4) + off in us */ #define EISA_BRST_TIM ((15<<4) + 1) /* 15us on, 1us off */ #define FIFOSIZE 128