| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mvs/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/atm/sscop/@/dev/isci/scil/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mvs/@/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/atm/sscop/@/dev/isci/scil/scic_sds_request.c |
/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: release/9.1.0/sys/dev/isci/scil/scic_sds_request.c 231689 2012-02-14 15:58:49Z jimharris $");
/**
* @file
*
* @brief This file contains the implementation for the operations on an
* SCIC_SDS_IO_REQUEST object.
*/
#include <dev/isci/scil/intel_sat.h>
#include <dev/isci/scil/intel_sata.h>
#include <dev/isci/scil/intel_sas.h>
#include <dev/isci/scil/sci_util.h>
#include <dev/isci/scil/sci_base_request.h>
#include <dev/isci/scil/scic_controller.h>
#include <dev/isci/scil/scic_io_request.h>
#include <dev/isci/scil/scic_remote_device.h>
#include <dev/isci/scil/scic_user_callback.h>
#include <dev/isci/scil/scic_sds_logger.h>
#include <dev/isci/scil/scic_sds_request.h>
#include <dev/isci/scil/scic_sds_pci.h>
#include <dev/isci/scil/scic_sds_stp_request.h>
#include <dev/isci/scil/scic_sds_controller.h>
#include <dev/isci/scil/scic_sds_controller_registers.h>
#include <dev/isci/scil/scic_sds_remote_device.h>
#include <dev/isci/scil/scic_sds_port.h>
#include <dev/isci/scil/scic_task_request.h>
#include <dev/isci/scil/scu_constants.h>
#include <dev/isci/scil/scu_task_context.h>
#include <dev/isci/scil/scic_sds_smp_request.h>
#include <dev/isci/sci_environment.h>
#include <dev/isci/scil/scic_sds_unsolicited_frame_control.h>
#include <dev/isci/scil/sci_types.h>
#include <dev/isci/scil/scu_completion_codes.h>
#include <dev/isci/scil/intel_scsi.h>
#if !defined(DISABLE_ATAPI)
#include <dev/isci/scil/scic_sds_stp_packet_request.h>
#endif
/**
* @struct SCI_SINGLE_LEVEL_LUN
*
* @brief this struct decribes the single level LUN structure
* as per the SAM 4.
*/
typedef struct SCI_SINGLE_LEVEL_LUN
{
U8 bus_id : 6;
U8 address_method : 2;
U8 lun_number;
U8 second_level_lun[2];
U8 third_level_lun[2];
U8 forth_level_lun[2];
} SCI_SINGLE_LEVEL_LUN_T;
//****************************************************************************
//* SCIC SDS IO REQUEST CONSTANTS
//****************************************************************************
/**
* We have no timer requirements for IO requests right now
*/
#define SCIC_SDS_IO_REQUEST_MINIMUM_TIMER_COUNT (0)
#define SCIC_SDS_IO_REQUEST_MAXIMUM_TIMER_COUNT (0)
//****************************************************************************
//* SCIC SDS IO REQUEST MACROS
//****************************************************************************
/**
* This is a helper macro to return the os handle for this request object.
*/
#define scic_sds_request_get_user_request(request) \
((request)->user_request)
/**
* This macro returns the sizeof memory required to store the an SSP IO
* request. This does not include the size of the SGL or SCU Task Context
* memory.The sizeof(U32) are needed for DWORD alignment of the command IU
* and response IU
*/
#define scic_ssp_io_request_get_object_size() \
( \
sizeof(SCI_SSP_COMMAND_IU_T) \
+ sizeof (U32) \
+ sizeof(SCI_SSP_RESPONSE_IU_T) \
+ sizeof (U32) \
)
/**
* This macro returns the address of the ssp command buffer in the io
* request memory
*/
#define scic_sds_ssp_request_get_command_buffer_unaligned(memory) \
((SCI_SSP_COMMAND_IU_T *)( \
((char *)(memory)) + sizeof(SCIC_SDS_REQUEST_T) \
))
/**
* This macro aligns the ssp command buffer in DWORD alignment
*/
#define scic_sds_ssp_request_align_command_buffer(address) \
((SCI_SSP_COMMAND_IU_T *)( \
(((POINTER_UINT)(address)) + (sizeof(U32) - 1)) \
& ~(sizeof(U32)- 1) \
))
/**
* This macro returns the DWORD-aligned ssp command buffer
*/
#define scic_sds_ssp_request_get_command_buffer(memory) \
((SCI_SSP_COMMAND_IU_T *) \
((char *)scic_sds_ssp_request_align_command_buffer( \
(char *) scic_sds_ssp_request_get_command_buffer_unaligned(memory) \
)))
/**
* This macro returns the address of the ssp response buffer in the io
* request memory
*/
#define scic_sds_ssp_request_get_response_buffer_unaligned(memory) \
((SCI_SSP_RESPONSE_IU_T *)( \
((char *)(scic_sds_ssp_request_get_command_buffer(memory))) \
+ sizeof(SCI_SSP_COMMAND_IU_T) \
))
/**
* This macro aligns the ssp response buffer in DWORD-aligned fashion
*/
#define scic_sds_ssp_request_align_response_buffer(memory) \
((SCI_SSP_RESPONSE_IU_T *)( \
(((POINTER_UINT)(memory)) + (sizeof(U32) - 1)) \
& ~(sizeof(U32)- 1) \
))
/**
* This macro returns the DWORD-aligned ssp response buffer
*/
#define scic_sds_ssp_request_get_response_buffer(memory) \
((SCI_SSP_RESPONSE_IU_T *) \
((char *)scic_sds_ssp_request_align_response_buffer ( \
(char *)scic_sds_ssp_request_get_response_buffer_unaligned(memory) \
)))
/**
* This macro returns the address of the task context buffer in the io
* request memory
*/
#define scic_sds_ssp_request_get_task_context_buffer_unaligned(memory) \
((SCU_TASK_CONTEXT_T *)( \
((char *)(scic_sds_ssp_request_get_response_buffer(memory))) \
+ sizeof(SCI_SSP_RESPONSE_IU_T) \
))
/**
* This macro returns the aligned task context buffer
*/
#define scic_sds_ssp_request_get_task_context_buffer(memory) \
((SCU_TASK_CONTEXT_T *)( \
((char *)scic_sds_request_align_task_context_buffer( \
(char *)scic_sds_ssp_request_get_task_context_buffer_unaligned(memory)) \
)))
/**
* This macro returns the address of the sgl elment pairs in the io request
* memory buffer
*/
#define scic_sds_ssp_request_get_sgl_element_buffer(memory) \
((SCU_SGL_ELEMENT_PAIR_T *)( \
((char *)(scic_sds_ssp_request_get_task_context_buffer(memory))) \
+ sizeof(SCU_TASK_CONTEXT_T) \
))
#if !defined(DISABLE_TASK_MANAGEMENT)
/**
* This macro returns the sizeof of memory required to store an SSP Task
* request. This does not include the size of the SCU Task Context memory.
*/
#define scic_ssp_task_request_get_object_size() \
( \
sizeof(SCI_SSP_TASK_IU_T) \
+ sizeof(SCI_SSP_RESPONSE_IU_T) \
)
/**
* This macro returns the address of the ssp command buffer in the task
* request memory. Yes its the same as the above macro except for the
* name.
*/
#define scic_sds_ssp_task_request_get_command_buffer(memory) \
((SCI_SSP_TASK_IU_T *)( \
((char *)(memory)) + sizeof(SCIC_SDS_REQUEST_T) \
))
/**
* This macro returns the address of the ssp response buffer in the task
* request memory.
*/
#define scic_sds_ssp_task_request_get_response_buffer(memory) \
((SCI_SSP_RESPONSE_IU_T *)( \
((char *)(scic_sds_ssp_task_request_get_command_buffer(memory))) \
+ sizeof(SCI_SSP_TASK_IU_T) \
))
/**
* This macro returs the task context buffer for the SSP task request.
*/
#define scic_sds_ssp_task_request_get_task_context_buffer(memory) \
((SCU_TASK_CONTEXT_T *)( \
((char *)(scic_sds_ssp_task_request_get_response_buffer(memory))) \
+ sizeof(SCI_SSP_RESPONSE_IU_T) \
))
#endif // !defined(DISABLE_TASK_MANAGEMENT)
//****************************************************************************
//* SCIC SDS IO REQUEST PRIVATE METHODS
//****************************************************************************
#ifdef SCI_LOGGING
/**
* This method will initialize state transition logging for the task request
* object.
*
* @param[in] this_request This is the request for which to track state
* transitions.
*/
void scic_sds_request_initialize_state_logging(
SCIC_SDS_REQUEST_T *this_request
)
{
sci_base_state_machine_logger_initialize(
&this_request->parent.state_machine_logger,
&this_request->parent.state_machine,
&this_request->parent.parent,
scic_cb_logger_log_states,
this_request->is_task_management_request ?
"SCIC_SDS_IO_REQUEST_T(Task)" : "SCIC_SDS_IO_REQUEST_T(IO)",
"base state machine",
SCIC_LOG_OBJECT_SMP_IO_REQUEST |
SCIC_LOG_OBJECT_STP_IO_REQUEST |
SCIC_LOG_OBJECT_SSP_IO_REQUEST
);
if (this_request->has_started_substate_machine)
{
sci_base_state_machine_logger_initialize(
&this_request->started_substate_machine_logger,
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_cb_logger_log_states,
"SCIC_SDS_IO_REQUEST_T(Task)", "starting substate machine",
SCIC_LOG_OBJECT_SMP_IO_REQUEST |
SCIC_LOG_OBJECT_STP_IO_REQUEST |
SCIC_LOG_OBJECT_SSP_IO_REQUEST
);
}
}
/**
* This method will stop the state transition logging for the task request
* object.
*
* @param[in] this_request The task request object on which to stop state
* transition logging.
*/
void scic_sds_request_deinitialize_state_logging(
SCIC_SDS_REQUEST_T *this_request
)
{
sci_base_state_machine_logger_deinitialize(
&this_request->parent.state_machine_logger,
&this_request->parent.state_machine
);
if (this_request->has_started_substate_machine)
{
sci_base_state_machine_logger_deinitialize(
&this_request->started_substate_machine_logger,
&this_request->started_substate_machine
);
}
}
#endif // SCI_LOGGING
/**
* This method returns the size required to store an SSP IO request object.
*
* @return U32
*/
static
U32 scic_sds_ssp_request_get_object_size(void)
{
return sizeof(SCIC_SDS_REQUEST_T)
+ scic_ssp_io_request_get_object_size()
+ sizeof(SCU_TASK_CONTEXT_T)
+ CACHE_LINE_SIZE
+ sizeof(SCU_SGL_ELEMENT_PAIR_T) * SCU_MAX_SGL_ELEMENT_PAIRS;
}
/**
* @brief This method returns the sgl element pair for the specificed
* sgl_pair index.
*
* @param[in] this_request This parameter specifies the IO request for which
* to retrieve the Scatter-Gather List element pair.
* @param[in] sgl_pair_index This parameter specifies the index into the SGL
* element pair to be retrieved.
*
* @return This method returns a pointer to an SCU_SGL_ELEMENT_PAIR.
*/
SCU_SGL_ELEMENT_PAIR_T *scic_sds_request_get_sgl_element_pair(
SCIC_SDS_REQUEST_T *this_request,
U32 sgl_pair_index
)
{
SCU_TASK_CONTEXT_T *task_context;
task_context = (SCU_TASK_CONTEXT_T *)this_request->task_context_buffer;
if (sgl_pair_index == 0)
{
return &task_context->sgl_pair_ab;
}
else if (sgl_pair_index == 1)
{
return &task_context->sgl_pair_cd;
}
return &this_request->sgl_element_pair_buffer[sgl_pair_index - 2];
}
/**
* @brief This function will build the SGL list for an IO request.
*
* @param[in] this_request This parameter specifies the IO request for which
* to build the Scatter-Gather List.
*
* @return none
*/
void scic_sds_request_build_sgl(
SCIC_SDS_REQUEST_T *this_request
)
{
void *os_sge;
void *os_handle;
SCI_PHYSICAL_ADDRESS physical_address;
U32 sgl_pair_index = 0;
SCU_SGL_ELEMENT_PAIR_T *scu_sgl_list = NULL;
SCU_SGL_ELEMENT_PAIR_T *previous_pair = NULL;
os_handle = scic_sds_request_get_user_request(this_request);
scic_cb_io_request_get_next_sge(os_handle, NULL, &os_sge);
while (os_sge != NULL)
{
scu_sgl_list =
scic_sds_request_get_sgl_element_pair(this_request, sgl_pair_index);
SCU_SGL_COPY(os_handle, scu_sgl_list->A, os_sge);
scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge);
if (os_sge != NULL)
{
SCU_SGL_COPY(os_handle, scu_sgl_list->B, os_sge);
scic_cb_io_request_get_next_sge(os_handle, os_sge, &os_sge);
}
else
{
SCU_SGL_ZERO(scu_sgl_list->B);
}
if (previous_pair != NULL)
{
scic_cb_io_request_get_physical_address(
scic_sds_request_get_controller(this_request),
this_request,
scu_sgl_list,
&physical_address
);
previous_pair->next_pair_upper =
sci_cb_physical_address_upper(physical_address);
previous_pair->next_pair_lower =
sci_cb_physical_address_lower(physical_address);
}
previous_pair = scu_sgl_list;
sgl_pair_index++;
}
if (scu_sgl_list != NULL)
{
scu_sgl_list->next_pair_upper = 0;
scu_sgl_list->next_pair_lower = 0;
}
}
/**
* @brief This method initializes common portions of the io request object.
* This includes construction of the SCI_BASE_REQUEST_T parent.
*
* @param[in] the_controller This parameter specifies the controller for which
* the request is being constructed.
* @param[in] the_target This parameter specifies the remote device for which
* the request is being constructed.
* @param[in] io_tag This parameter specifies the IO tag to be utilized for
* this request. This parameter can be set to
* SCI_CONTROLLER_INVALID_IO_TAG.
* @param[in] user_io_request_object This parameter specifies the user
* request object for which the request is being constructed.
* @param[in] this_request This parameter specifies the request being
* constructed.
*
* @return none
*/
static
void scic_sds_general_request_construct(
SCIC_SDS_CONTROLLER_T * the_controller,
SCIC_SDS_REMOTE_DEVICE_T * the_target,
U16 io_tag,
void * user_io_request_object,
SCIC_SDS_REQUEST_T * this_request
)
{
sci_base_request_construct(
&this_request->parent,
sci_base_object_get_logger(the_controller),
scic_sds_request_state_table
);
this_request->io_tag = io_tag;
this_request->user_request = user_io_request_object;
this_request->owning_controller = the_controller;
this_request->target_device = the_target;
this_request->has_started_substate_machine = FALSE;
this_request->protocol = SCIC_NO_PROTOCOL;
this_request->sat_protocol = 0xFF;
this_request->saved_rx_frame_index = SCU_INVALID_FRAME_INDEX;
this_request->device_sequence = scic_sds_remote_device_get_sequence(the_target);
this_request->sci_status = SCI_SUCCESS;
this_request->scu_status = 0;
this_request->post_context = 0xFFFFFFFF;
this_request->is_task_management_request = FALSE;
if (io_tag == SCI_CONTROLLER_INVALID_IO_TAG)
{
this_request->was_tag_assigned_by_user = FALSE;
this_request->task_context_buffer = NULL;
}
else
{
this_request->was_tag_assigned_by_user = TRUE;
this_request->task_context_buffer =
scic_sds_controller_get_task_context_buffer(
this_request->owning_controller, io_tag);
}
}
/**
* @brief This method build the remainder of the IO request object.
*
* @pre The scic_sds_general_request_construct() must be called before this
* call is valid.
*
* @param[in] this_request This parameter specifies the request object being
* constructed.
*
* @return none
*/
void scic_sds_ssp_io_request_assign_buffers(
SCIC_SDS_REQUEST_T *this_request
)
{
this_request->command_buffer =
scic_sds_ssp_request_get_command_buffer(this_request);
this_request->response_buffer =
scic_sds_ssp_request_get_response_buffer(this_request);
this_request->sgl_element_pair_buffer =
scic_sds_ssp_request_get_sgl_element_buffer(this_request);
this_request->sgl_element_pair_buffer =
scic_sds_request_align_sgl_element_buffer(this_request->sgl_element_pair_buffer);
if (this_request->was_tag_assigned_by_user == FALSE)
{
this_request->task_context_buffer =
scic_sds_ssp_request_get_task_context_buffer(this_request);
}
}
/**
* @brief This method constructs the SSP Command IU data for this io
* request object.
*
* @param[in] this_request This parameter specifies the request object for
* which the SSP command information unit is being built.
*
* @return none
*/
static
void scic_sds_io_request_build_ssp_command_iu(
SCIC_SDS_REQUEST_T *this_request
)
{
SCI_SINGLE_LEVEL_LUN_T lun;
SCI_SSP_COMMAND_IU_T *command_frame;
void *os_handle;
U32 cdb_length;
U32 *cdb_buffer;
command_frame =
(SCI_SSP_COMMAND_IU_T *)this_request->command_buffer;
os_handle = scic_sds_request_get_user_request(this_request);
((U32 *)&lun)[0] = 0;
((U32 *)&lun)[1] = 0;
lun.lun_number = scic_cb_ssp_io_request_get_lun(os_handle) &0xff;
/// @todo Is it ok to leave junk at the end of the cdb buffer?
scic_word_copy_with_swap(
(U32 *)command_frame->lun,
(U32 *)&lun,
sizeof(lun));
((U32 *)command_frame)[2] = 0;
cdb_length = scic_cb_ssp_io_request_get_cdb_length(os_handle);
cdb_buffer = (U32 *)scic_cb_ssp_io_request_get_cdb_address(os_handle);
if (cdb_length > 16)
{
command_frame->additional_cdb_length = cdb_length - 16;
}
/// @todo Is it ok to leave junk at the end of the cdb buffer?
scic_word_copy_with_swap(
(U32 *)(&command_frame->cdb),
(U32 *)(cdb_buffer),
(cdb_length + 3) / sizeof(U32)
);
command_frame->enable_first_burst = 0;
command_frame->task_priority =
scic_cb_ssp_io_request_get_command_priority(os_handle);
command_frame->task_attribute =
scic_cb_ssp_io_request_get_task_attribute(os_handle);
}
#if !defined(DISABLE_TASK_MANAGEMENT)
/**
* @brief This method constructs the SSP Task IU data for this io request
* object.
*
* @param[in] this_request
*
* @return none
*/
static
void scic_sds_task_request_build_ssp_task_iu(
SCIC_SDS_REQUEST_T *this_request
)
{
SCI_SSP_TASK_IU_T *command_frame;
void *os_handle;
command_frame =
(SCI_SSP_TASK_IU_T *)this_request->command_buffer;
os_handle = scic_sds_request_get_user_request(this_request);
command_frame->lun_upper = 0;
command_frame->lun_lower = scic_cb_ssp_task_request_get_lun(os_handle);
((U32 *)command_frame)[2] = 0;
command_frame->task_function =
scic_cb_ssp_task_request_get_function(os_handle);
command_frame->task_tag =
scic_cb_ssp_task_request_get_io_tag_to_manage(os_handle);
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
/**
* @brief This method is will fill in the SCU Task Context for any type of
* SSP request.
*
* @param[in] this_request
* @param[in] task_context
*
* @return none
*/
static
void scu_ssp_reqeust_construct_task_context(
SCIC_SDS_REQUEST_T * this_request,
SCU_TASK_CONTEXT_T * task_context
)
{
SCI_PHYSICAL_ADDRESS physical_address;
SCIC_SDS_CONTROLLER_T *owning_controller;
SCIC_SDS_REMOTE_DEVICE_T *target_device;
SCIC_SDS_PORT_T *target_port;
owning_controller = scic_sds_request_get_controller(this_request);
target_device = scic_sds_request_get_device(this_request);
target_port = scic_sds_request_get_port(this_request);
// Fill in the TC with the its required data
task_context->abort = 0;
task_context->priority = 0;
task_context->initiator_request = 1;
task_context->connection_rate =
scic_remote_device_get_connection_rate(target_device);
task_context->protocol_engine_index =
scic_sds_controller_get_protocol_engine_group(owning_controller);
task_context->logical_port_index =
scic_sds_port_get_index(target_port);
task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
task_context->valid = SCU_TASK_CONTEXT_VALID;
task_context->context_type = SCU_TASK_CONTEXT_TYPE;
task_context->remote_node_index =
scic_sds_remote_device_get_index(this_request->target_device);
task_context->command_code = 0;
task_context->link_layer_control = 0;
task_context->do_not_dma_ssp_good_response = 1;
task_context->strict_ordering = 0;
task_context->control_frame = 0;
task_context->timeout_enable = 0;
task_context->block_guard_enable = 0;
task_context->address_modifier = 0;
//task_context->type.ssp.tag = this_request->io_tag;
task_context->task_phase = 0x01;
if (this_request->was_tag_assigned_by_user)
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
| scic_sds_io_tag_get_index(this_request->io_tag)
);
}
else
{
// Build the task context now since we have already read the data
this_request->post_context = (
SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC
| (
scic_sds_controller_get_protocol_engine_group(owning_controller)
<< SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT
)
| (
scic_sds_port_get_index(target_port)
<< SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT
)
// This is not assigned because we have to wait until we get a TCi
);
}
// Copy the physical address for the command buffer to the SCU Task Context
scic_cb_io_request_get_physical_address(
scic_sds_request_get_controller(this_request),
this_request,
this_request->command_buffer,
&physical_address
);
task_context->command_iu_upper =
sci_cb_physical_address_upper(physical_address);
task_context->command_iu_lower =
sci_cb_physical_address_lower(physical_address);
// Copy the physical address for the response buffer to the SCU Task Context
scic_cb_io_request_get_physical_address(
scic_sds_request_get_controller(this_request),
this_request,
this_request->response_buffer,
&physical_address
);
task_context->response_iu_upper =
sci_cb_physical_address_upper(physical_address);
task_context->response_iu_lower =
sci_cb_physical_address_lower(physical_address);
}
/**
* @brief This method is will fill in the SCU Task Context for a SSP IO
* request.
*
* @param[in] this_request
*
* @return none
*/
static
void scu_ssp_io_request_construct_task_context(
SCIC_SDS_REQUEST_T *this_request,
SCI_IO_REQUEST_DATA_DIRECTION data_direction,
U32 transfer_length_bytes
)
{
SCU_TASK_CONTEXT_T *task_context;
task_context = scic_sds_request_get_task_context(this_request);
scu_ssp_reqeust_construct_task_context(this_request, task_context);
task_context->ssp_command_iu_length = sizeof(SCI_SSP_COMMAND_IU_T) / sizeof(U32);
task_context->type.ssp.frame_type = SCI_SAS_COMMAND_FRAME;
switch (data_direction)
{
case SCI_IO_REQUEST_DATA_IN:
case SCI_IO_REQUEST_NO_DATA:
task_context->task_type = SCU_TASK_TYPE_IOREAD;
break;
case SCI_IO_REQUEST_DATA_OUT:
task_context->task_type = SCU_TASK_TYPE_IOWRITE;
break;
}
task_context->transfer_length_bytes = transfer_length_bytes;
if (task_context->transfer_length_bytes > 0)
{
scic_sds_request_build_sgl(this_request);
}
}
#if !defined(DISABLE_TASK_MANAGEMENT)
/**
* @brief This method will fill in the remainder of the io request object
* for SSP Task requests.
*
* @param[in] this_request
*
* @return none
*/
void scic_sds_ssp_task_request_assign_buffers(
SCIC_SDS_REQUEST_T *this_request
)
{
// Assign all of the buffer pointers
this_request->command_buffer =
scic_sds_ssp_task_request_get_command_buffer(this_request);
this_request->response_buffer =
scic_sds_ssp_task_request_get_response_buffer(this_request);
this_request->sgl_element_pair_buffer = NULL;
if (this_request->was_tag_assigned_by_user == FALSE)
{
this_request->task_context_buffer =
scic_sds_ssp_task_request_get_task_context_buffer(this_request);
this_request->task_context_buffer =
scic_sds_request_align_task_context_buffer(this_request->task_context_buffer);
}
}
/**
* @brief This method will fill in the SCU Task Context for a SSP Task
* request. The following important settings are utilized:
* -# priority == SCU_TASK_PRIORITY_HIGH. This ensures that the
* task request is issued ahead of other task destined for the
* same Remote Node.
* -# task_type == SCU_TASK_TYPE_IOREAD. This simply indicates
* that a normal request type (i.e. non-raw frame) is being
* utilized to perform task management.
* -# control_frame == 1. This ensures that the proper endianess
* is set so that the bytes are transmitted in the right order
* for a task frame.
*
* @param[in] this_request This parameter specifies the task request object
* being constructed.
*
* @return none
*/
static
void scu_ssp_task_request_construct_task_context(
SCIC_SDS_REQUEST_T *this_request
)
{
SCU_TASK_CONTEXT_T *task_context;
task_context = scic_sds_request_get_task_context(this_request);
scu_ssp_reqeust_construct_task_context(this_request, task_context);
task_context->control_frame = 1;
task_context->priority = SCU_TASK_PRIORITY_HIGH;
task_context->task_type = SCU_TASK_TYPE_RAW_FRAME;
task_context->transfer_length_bytes = 0;
task_context->type.ssp.frame_type = SCI_SAS_TASK_FRAME;
task_context->ssp_command_iu_length = sizeof(SCI_SSP_TASK_IU_T) / sizeof(U32);
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
#if !defined(DISABLE_PASS_THROUGH)
/**
* @brief This method constructs the SSP Command IU data for this
* ssp passthrough comand request object.
*
* @param[in] this_request This parameter specifies the request object for
* which the SSP command information unit is being built.
*
* @return SCI_STATUS, returns invalid parameter is cdb > 16
*/
static
SCI_STATUS scic_sds_io_request_build_ssp_command_iu_pass_through(
SCIC_SDS_REQUEST_T *this_request,
SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS_T *ssp_passthru_cb
)
{
SCI_SSP_COMMAND_IU_T *command_frame;
U32 cdb_length = 0, additional_cdb_length = 0;
U8 *cdb_buffer, *additional_cdb_buffer;
U8 *scsi_lun;
SCI_STATUS sci_status = SCI_SUCCESS;
SCI_SINGLE_LEVEL_LUN_T lun;
command_frame =
(SCI_SSP_COMMAND_IU_T *)this_request->command_buffer;
//get the lun
ssp_passthru_cb->scic_cb_ssp_passthru_get_lun (
this_request,
&scsi_lun
);
memset(&lun, 0, sizeof(lun));
lun.lun_number = *scsi_lun;
scic_word_copy_with_swap(
(U32 *)command_frame->lun,
(U32 *)&lun,
sizeof(lun));
((U32 *)command_frame)[2] = 0;
ssp_passthru_cb->scic_cb_ssp_passthru_get_cdb(
this_request,
&cdb_length,
&cdb_buffer,
&additional_cdb_length,
&additional_cdb_buffer
);
command_frame->additional_cdb_length = additional_cdb_length;
// ----------- TODO
///todo: what to do with additional cdb length and buffer as the current command buffer is
// 16 bytes in intel_sas.h
// ??? see the SAS command IU
if (additional_cdb_length > 0)
{
return SCI_FAILURE_INVALID_PARAMETER_VALUE;
}
/// @todo Is it ok to leave junk at the end of the cdb buffer?
scic_word_copy_with_swap(
(U32 *)(&command_frame->cdb),
(U32 *)(cdb_buffer),
(cdb_length + 3) / sizeof(U32)
);
/////-------- End fo TODO
command_frame->enable_first_burst = 0;
command_frame->task_priority = 0; //todo: check with Richard ????
//get the task attribute
command_frame->task_attribute = ssp_passthru_cb->scic_cb_ssp_passthru_get_task_attribute (
this_request
);
return sci_status;
}
#endif // !defined(DISABLE_PASS_THROUGH)
//****************************************************************************
//* SCIC Interface Implementation
//****************************************************************************
#if !defined(DISABLE_TASK_MANAGEMENT)
/**
* This method returns the size required to store an SSP task request object.
*
* @return U32
*/
static
U32 scic_sds_ssp_task_request_get_object_size(void)
{
return sizeof(SCIC_SDS_REQUEST_T)
+ scic_ssp_task_request_get_object_size()
+ sizeof(SCU_TASK_CONTEXT_T)
+ CACHE_LINE_SIZE;
}
U32 scic_task_request_get_object_size(void)
{
U32 ssp_task_request_size;
U32 stp_task_request_size;
ssp_task_request_size = scic_sds_ssp_task_request_get_object_size();
stp_task_request_size = scic_sds_stp_task_request_get_object_size();
return MAX(ssp_task_request_size, stp_task_request_size);
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
// ---------------------------------------------------------------------------
U32 scic_io_request_get_object_size(void)
{
U32 ssp_request_size;
U32 stp_request_size;
U32 smp_request_size;
ssp_request_size = scic_sds_ssp_request_get_object_size();
stp_request_size = scic_sds_stp_request_get_object_size();
smp_request_size = scic_sds_smp_request_get_object_size();
return MAX(ssp_request_size, MAX(stp_request_size, smp_request_size));
}
// ---------------------------------------------------------------------------
SCIC_TRANSPORT_PROTOCOL scic_io_request_get_protocol(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T * )scic_io_request;
return this_request->protocol;
}
// ---------------------------------------------------------------------------
U32 scic_sds_request_get_min_timer_count(void)
{
return SCIC_SDS_IO_REQUEST_MINIMUM_TIMER_COUNT;
}
// ---------------------------------------------------------------------------
U32 scic_sds_request_get_max_timer_count(void)
{
return SCIC_SDS_IO_REQUEST_MAXIMUM_TIMER_COUNT;
}
// ---------------------------------------------------------------------------
SCI_STATUS scic_io_request_construct(
SCI_CONTROLLER_HANDLE_T scic_controller,
SCI_REMOTE_DEVICE_HANDLE_T scic_remote_device,
U16 io_tag,
void * user_io_request_object,
void * scic_io_request_memory,
SCI_IO_REQUEST_HANDLE_T * new_scic_io_request_handle
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_REQUEST_T * this_request;
SMP_DISCOVER_RESPONSE_PROTOCOLS_T device_protocol;
this_request = (SCIC_SDS_REQUEST_T * )scic_io_request_memory;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_controller),
(SCIC_LOG_OBJECT_SSP_IO_REQUEST
|SCIC_LOG_OBJECT_SMP_IO_REQUEST
|SCIC_LOG_OBJECT_STP_IO_REQUEST),
"scic_io_request_construct(0x%x, 0x%x, 0x02x, 0x%x, 0x%x, 0x%x) enter\n",
scic_controller, scic_remote_device,
io_tag, user_io_request_object,
this_request, new_scic_io_request_handle
));
// Build the common part of the request
scic_sds_general_request_construct(
(SCIC_SDS_CONTROLLER_T *)scic_controller,
(SCIC_SDS_REMOTE_DEVICE_T *)scic_remote_device,
io_tag,
user_io_request_object,
this_request
);
if (
scic_sds_remote_device_get_index((SCIC_SDS_REMOTE_DEVICE_T *)scic_remote_device)
== SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
)
{
return SCI_FAILURE_INVALID_REMOTE_DEVICE;
}
scic_remote_device_get_protocols(scic_remote_device, &device_protocol);
if (device_protocol.u.bits.attached_ssp_target)
{
scic_sds_ssp_io_request_assign_buffers(this_request);
}
else if (device_protocol.u.bits.attached_stp_target)
{
scic_sds_stp_request_assign_buffers(this_request);
memset(this_request->command_buffer, 0, sizeof(SATA_FIS_REG_H2D_T));
}
else if (device_protocol.u.bits.attached_smp_target)
{
scic_sds_smp_request_assign_buffers(this_request);
memset(this_request->command_buffer, 0, sizeof(SMP_REQUEST_T));
}
else
{
status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
}
if (status == SCI_SUCCESS)
{
memset(
this_request->task_context_buffer,
0,
SCI_FIELD_OFFSET(SCU_TASK_CONTEXT_T, sgl_pair_ab)
);
*new_scic_io_request_handle = scic_io_request_memory;
}
return status;
}
// ---------------------------------------------------------------------------
#if !defined(DISABLE_TASK_MANAGEMENT)
SCI_STATUS scic_task_request_construct(
SCI_CONTROLLER_HANDLE_T controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
U16 io_tag,
void *user_io_request_object,
void *scic_task_request_memory,
SCI_TASK_REQUEST_HANDLE_T *new_scic_task_request_handle
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)
scic_task_request_memory;
SMP_DISCOVER_RESPONSE_PROTOCOLS_T device_protocol;
SCIC_LOG_TRACE((
sci_base_object_get_logger(controller),
(SCIC_LOG_OBJECT_SSP_IO_REQUEST
|SCIC_LOG_OBJECT_SMP_IO_REQUEST
|SCIC_LOG_OBJECT_STP_IO_REQUEST),
"scic_task_request_construct(0x%x, 0x%x, 0x02x, 0x%x, 0x%x, 0x%x) enter\n",
controller, remote_device,
io_tag, user_io_request_object,
scic_task_request_memory, new_scic_task_request_handle
));
// Build the common part of the request
scic_sds_general_request_construct(
(SCIC_SDS_CONTROLLER_T *)controller,
(SCIC_SDS_REMOTE_DEVICE_T *)remote_device,
io_tag,
user_io_request_object,
this_request
);
scic_remote_device_get_protocols(remote_device, &device_protocol);
if (device_protocol.u.bits.attached_ssp_target)
{
scic_sds_ssp_task_request_assign_buffers(this_request);
this_request->has_started_substate_machine = TRUE;
// Construct the started sub-state machine.
sci_base_state_machine_construct(
&this_request->started_substate_machine,
&this_request->parent.parent,
scic_sds_io_request_started_task_mgmt_substate_table,
SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION
);
}
else if (device_protocol.u.bits.attached_stp_target)
{
scic_sds_stp_request_assign_buffers(this_request);
}
else
{
status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
}
if (status == SCI_SUCCESS)
{
this_request->is_task_management_request = TRUE;
memset(this_request->task_context_buffer, 0x00, sizeof(SCU_TASK_CONTEXT_T));
*new_scic_task_request_handle = scic_task_request_memory;
}
return status;
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
// ---------------------------------------------------------------------------
SCI_STATUS scic_io_request_construct_basic_ssp(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
void *os_handle;
SCIC_SDS_REQUEST_T *this_request;
this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST,
"scic_io_request_construct_basic_ssp(0x%x) enter\n",
this_request
));
this_request->protocol = SCIC_SSP_PROTOCOL;
os_handle = scic_sds_request_get_user_request(this_request);
scu_ssp_io_request_construct_task_context(
this_request,
scic_cb_io_request_get_data_direction(os_handle),
scic_cb_io_request_get_transfer_length(os_handle)
);
scic_sds_io_request_build_ssp_command_iu(this_request);
scic_sds_request_initialize_state_logging(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
return SCI_SUCCESS;
}
// ---------------------------------------------------------------------------
#if !defined(DISABLE_TASK_MANAGEMENT)
SCI_STATUS scic_task_request_construct_ssp(
SCI_TASK_REQUEST_HANDLE_T scic_task_request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)
scic_task_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST,
"scic_task_request_construct_ssp(0x%x) enter\n",
this_request
));
// Construct the SSP Task SCU Task Context
scu_ssp_task_request_construct_task_context(this_request);
// Fill in the SSP Task IU
scic_sds_task_request_build_ssp_task_iu(this_request);
scic_sds_request_initialize_state_logging(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
return SCI_SUCCESS;
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
// ---------------------------------------------------------------------------
SCI_STATUS scic_io_request_construct_advanced_ssp(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_IO_SSP_PARAMETERS_T * io_parameters
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST,
"scic_io_request_construct_advanced_ssp(0x%x, 0x%x) enter\n",
io_parameters, scic_io_request
));
/// @todo Implement after 1.1
return SCI_FAILURE;
}
// ---------------------------------------------------------------------------
#if !defined(DISABLE_PASS_THROUGH)
SCI_STATUS scic_io_request_construct_ssp_pass_through (
void * scic_io_request,
SCIC_SSP_PASSTHRU_REQUEST_CALLBACKS_T *ssp_passthru_cb
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_REQUEST_T * this_request;
this_request = (SCIC_SDS_REQUEST_T * )scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_io_request_construct_ssp_pass_through(0x%x) enter\n",
scic_io_request
));
//build the task context from the pass through buffer
scu_ssp_io_request_construct_task_context(
this_request,
ssp_passthru_cb->common_callbacks.scic_cb_passthru_get_data_direction (this_request),
ssp_passthru_cb->common_callbacks.scic_cb_passthru_get_transfer_length(this_request)
);
//build the ssp command iu from the pass through buffer
status = scic_sds_io_request_build_ssp_command_iu_pass_through (
this_request,
ssp_passthru_cb
);
if (status != SCI_SUCCESS)
{
return status;
}
/* initialize the logging */
scic_sds_request_initialize_state_logging(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
return status;
}
#endif // !defined(DISABLE_PASS_THROUGH)
// ---------------------------------------------------------------------------
#if !defined(DISABLE_TASK_MANAGEMENT)
SCI_STATUS scic_task_request_construct_sata(
SCI_TASK_REQUEST_HANDLE_T scic_task_request
)
{
SCI_STATUS status;
SCIC_SDS_REQUEST_T * this_request;
U8 sat_protocol;
this_request = (SCIC_SDS_REQUEST_T *)scic_task_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_task_request_construct_sata(0x%x) enter\n",
this_request
));
sat_protocol =
scic_cb_request_get_sat_protocol(this_request->user_request);
this_request->sat_protocol = sat_protocol;
switch (sat_protocol)
{
case SAT_PROTOCOL_ATA_HARD_RESET:
case SAT_PROTOCOL_SOFT_RESET:
status = scic_sds_stp_soft_reset_request_construct(this_request);
break;
case SAT_PROTOCOL_PIO_DATA_IN:
status = scic_sds_stp_pio_request_construct(this_request, sat_protocol, FALSE);
break;
default:
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x received un-handled SAT Protocl %d.\n",
this_request, sat_protocol
));
status = SCI_FAILURE;
break;
}
if (status == SCI_SUCCESS)
{
scic_sds_request_initialize_state_logging(this_request);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
}
return status;
}
#endif // !defined(DISABLE_TASK_MANAGEMENT)
// ---------------------------------------------------------------------------
#if !defined(DISABLE_PASS_THROUGH)
SCI_STATUS scic_io_request_construct_sata_pass_through(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
SCIC_STP_PASSTHRU_REQUEST_CALLBACKS_T *passthru_cb
)
{
SCI_STATUS status = SCI_SUCCESS;
SCIC_SDS_REQUEST_T * this_request;
U8 sat_protocol;
U8 * reg_fis;
U32 transfer_length;
SCI_IO_REQUEST_DATA_DIRECTION data_direction;
this_request = (SCIC_SDS_REQUEST_T * )scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"scic_io_request_construct_sata_pass_through(0x%x) enter\n",
scic_io_request
));
passthru_cb->scic_cb_stp_passthru_get_register_fis(this_request, ®_fis);
if (reg_fis == NULL)
{
status = SCI_FAILURE_INVALID_PARAMETER_VALUE;
}
if (status == SCI_SUCCESS)
{
//copy the H2D Reg fis blindly from the request to the SCU command buffer
memcpy ((U8 *)this_request->command_buffer, (U8 *)reg_fis, sizeof(SATA_FIS_REG_H2D_T));
//continue to create the request
sat_protocol = passthru_cb->scic_cb_stp_passthru_get_protocol(this_request);
transfer_length = passthru_cb->common_callbacks.scic_cb_passthru_get_transfer_length(this_request);
data_direction = passthru_cb->common_callbacks.scic_cb_passthru_get_data_direction(this_request);
status = scic_sds_io_request_construct_sata(
this_request,
sat_protocol,
transfer_length,
data_direction,
TRUE,
TRUE
);
this_request->protocol = SCIC_STP_PROTOCOL;
}
return status;
}
#endif // !defined(DISABLE_PASS_THROUGH)
// ---------------------------------------------------------------------------
U16 scic_io_request_get_io_tag(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_REQUEST_T *this_request;
this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
SCIC_LOG_TRACE((
sci_base_object_get_logger(scic_io_request),
SCIC_LOG_OBJECT_SMP_IO_REQUEST,
"scic_io_request_get_io_tag(0x%x) enter\n",
scic_io_request
));
return this_request->io_tag;
}
// ---------------------------------------------------------------------------
U32 scic_request_get_controller_status(
SCI_IO_REQUEST_HANDLE_T io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T*)io_request;
return this_request->scu_status;
}
U32 scic_request_get_sci_status(
SCI_IO_REQUEST_HANDLE_T io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T*)io_request;
return this_request->sci_status;
}
// ---------------------------------------------------------------------------
void * scic_io_request_get_rx_frame(
SCI_IO_REQUEST_HANDLE_T scic_io_request,
U32 offset
)
{
void * frame_buffer = NULL;
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
ASSERT(offset < SCU_UNSOLICITED_FRAME_BUFFER_SIZE);
if (this_request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
{
scic_sds_unsolicited_frame_control_get_buffer(
&(this_request->owning_controller->uf_control),
this_request->saved_rx_frame_index,
&frame_buffer
);
}
return frame_buffer;
}
void * scic_io_request_get_command_iu_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
return this_request->command_buffer;
}
// ---------------------------------------------------------------------------
void * scic_io_request_get_response_iu_address(
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
SCIC_SDS_REQUEST_T * this_request = (SCIC_SDS_REQUEST_T *)scic_io_request;
return this_request->response_buffer;
}
// ---------------------------------------------------------------------------
#define SCU_TASK_CONTEXT_SRAM 0x200000
U32 scic_io_request_get_number_of_bytes_transferred (
SCI_IO_REQUEST_HANDLE_T scic_io_request
)
{
U32 ret_val = 0;
SCIC_SDS_REQUEST_T * scic_sds_request;
scic_sds_request = (SCIC_SDS_REQUEST_T *) scic_io_request;
if ( SMU_AMR_READ (scic_sds_request->owning_controller) == 0)
{
//get the bytes of data from the Address == BAR1 + 20002Ch + (256*TCi) where
// BAR1 is the scu_registers
// 0x20002C = 0x200000 + 0x2c
// = start of task context SRAM + offset of (type.ssp.data_offset)
// TCi is the io_tag of SCIC_SDS_REQUEST
ret_val = scic_sds_pci_read_scu_dword(
scic_sds_request->owning_controller,
(
(U8 *) scic_sds_request->owning_controller->scu_registers +
( SCU_TASK_CONTEXT_SRAM + SCI_FIELD_OFFSET(SCU_TASK_CONTEXT_T, type.ssp.data_offset) ) +
( ( sizeof (SCU_TASK_CONTEXT_T) ) * scic_sds_io_tag_get_index (scic_sds_request->io_tag))
)
);
}
return ret_val;
}
//****************************************************************************
//* SCIC SDS Interface Implementation
//****************************************************************************
/**
* This method invokes the base state start request handler for the
* SCIC_SDS_IO_REQUEST_T object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the
* start operation is to be executed.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_request_start(
SCIC_SDS_REQUEST_T *this_request
)
{
if (
this_request->device_sequence
== scic_sds_remote_device_get_sequence(this_request->target_device)
)
{
return this_request->state_handlers->parent.start_handler(
&this_request->parent
);
}
return SCI_FAILURE;
}
/**
* This method invokes the base state terminate request handber for the
* SCIC_SDS_IO_REQUEST_T object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the
* start operation is to be executed.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_io_request_terminate(
SCIC_SDS_REQUEST_T *this_request
)
{
return this_request->state_handlers->parent.abort_handler(
&this_request->parent);
}
/**
* This method invokes the base state request completion handler for the
* SCIC_SDS_IO_REQUEST_T object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the
* start operation is to be executed.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_io_request_complete(
SCIC_SDS_REQUEST_T *this_request
)
{
return this_request->state_handlers->parent.complete_handler(
&this_request->parent);
}
/**
* This method invokes the core state handler for the SCIC_SDS_IO_REQUEST_T
* object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the
* start operation is to be executed.
* @param[in] event_code The event code returned by the hardware for the task
* reqeust.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_io_request_event_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 event_code
)
{
return this_request->state_handlers->event_handler(this_request, event_code);
}
/**
* This method invokes the core state frame handler for the
* SCIC_SDS_IO_REQUEST_T object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the
* start operation is to be executed.
* @param[in] frame_index The frame index returned by the hardware for the
* reqeust object.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_io_request_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
return this_request->state_handlers->frame_handler(this_request, frame_index);
}
/**
* This method invokes the core state task complete handler for the
* SCIC_SDS_IO_REQUEST_T object.
*
* @param[in] this_request The SCIC_SDS_IO_REQUEST_T object for which the task
* start operation is to be executed.
*
* @return SCI_STATUS
*/
SCI_STATUS scic_sds_task_request_complete(
SCIC_SDS_REQUEST_T *this_request
)
{
return this_request->state_handlers->parent.complete_handler(&this_request->parent);
}
//****************************************************************************
//* SCIC SDS PROTECTED METHODS
//****************************************************************************
/**
* @brief This method copies response data for requests returning response
* data instead of sense data.
*
* @param[in] this_request This parameter specifies the request object for
* which to copy the response data.
*
* @return none
*/
void scic_sds_io_request_copy_response(
SCIC_SDS_REQUEST_T *this_request
)
{
void * response_buffer;
U32 user_response_length;
U32 core_response_length;
SCI_SSP_RESPONSE_IU_T * ssp_response;
ssp_response = (SCI_SSP_RESPONSE_IU_T *)this_request->response_buffer;
response_buffer = scic_cb_ssp_task_request_get_response_data_address(
this_request->user_request
);
user_response_length = scic_cb_ssp_task_request_get_response_data_length(
this_request->user_request
);
core_response_length = sci_ssp_get_response_data_length(
ssp_response->response_data_length
);
user_response_length = MIN(user_response_length, core_response_length);
memcpy(response_buffer, ssp_response->data, user_response_length);
}
//******************************************************************************
//* REQUEST STATE MACHINE
//******************************************************************************
//*****************************************************************************
//* DEFAULT STATE HANDLERS
//*****************************************************************************
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_start() request. The default action is
* to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_start_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger((SCIC_SDS_REQUEST_T *)request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request requested to start while in wrong state %d\n",
sci_base_state_machine_get_state(
&((SCIC_SDS_REQUEST_T *)request)->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_terminate() request. The default action
* is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_abort_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger((SCIC_SDS_REQUEST_T *)request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request requested to abort while in wrong state %d\n",
sci_base_state_machine_get_state(
&((SCIC_SDS_REQUEST_T *)request)->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_complete() request. The default action
* is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_complete_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger((SCIC_SDS_REQUEST_T *)request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request requested to complete while in wrong state %d\n",
sci_base_state_machine_get_state(
&((SCIC_SDS_REQUEST_T *)request)->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_complete() request. The default action
* is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_destruct_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger((SCIC_SDS_REQUEST_T *)request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request requested to destroy while in wrong state %d\n",
sci_base_state_machine_get_state(
&((SCIC_SDS_REQUEST_T *)request)->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_task_request_complete() request. The default
* action is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request given task completion notification %x while in wrong state %d\n",
completion_code,
sci_base_state_machine_get_state(&this_request->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_event_handler() request. The default
* action is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_event_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 event_code
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request given event code notification %x while in wrong state %d\n",
event_code,
sci_base_state_machine_get_state(&this_request->parent.state_machine)
));
return SCI_FAILURE_INVALID_STATE;
}
/**
* This method is the default action to take when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_event_handler() request. The default
* action is to log a warning and return a failure status.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_FAILURE_INVALID_STATE
*/
SCI_STATUS scic_sds_request_default_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
SCIC_LOG_WARNING((
sci_base_object_get_logger(this_request),
(
SCIC_LOG_OBJECT_SSP_IO_REQUEST
| SCIC_LOG_OBJECT_STP_IO_REQUEST
| SCIC_LOG_OBJECT_SMP_IO_REQUEST
),
"SCIC IO Request given unexpected frame %x while in state %d\n",
frame_index,
sci_base_state_machine_get_state(&this_request->parent.state_machine)
));
scic_sds_controller_release_frame(
this_request->owning_controller, frame_index);
return SCI_FAILURE_INVALID_STATE;
}
//*****************************************************************************
//* CONSTRUCTED STATE HANDLERS
//*****************************************************************************
/**
* This method implements the action taken when a constructed
* SCIC_SDS_IO_REQUEST_T object receives a scic_sds_request_start() request.
*
* This method will, if necessary, allocate a TCi for the io request object
* and then will, if necessary, copy the constructed TC data into the actual
* TC buffer. If everything is successful the post context field is updated
* with the TCi so the controller can post the request to the hardware.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
* @retval SCI_FAILURE_INSUFFICIENT_RESOURCES
*/
static
SCI_STATUS scic_sds_request_constructed_state_start_handler(
SCI_BASE_REQUEST_T *request
)
{
SCU_TASK_CONTEXT_T *task_context;
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
if (this_request->io_tag == SCI_CONTROLLER_INVALID_IO_TAG)
{
this_request->io_tag =
scic_controller_allocate_io_tag(this_request->owning_controller);
}
// Record the IO Tag in the request
if (this_request->io_tag != SCI_CONTROLLER_INVALID_IO_TAG)
{
task_context = this_request->task_context_buffer;
task_context->task_index = scic_sds_io_tag_get_index(this_request->io_tag);
switch (task_context->protocol_type)
{
case SCU_TASK_CONTEXT_PROTOCOL_SMP:
case SCU_TASK_CONTEXT_PROTOCOL_SSP:
// SSP/SMP Frame
task_context->type.ssp.tag = this_request->io_tag;
task_context->type.ssp.target_port_transfer_tag = 0xFFFF;
break;
case SCU_TASK_CONTEXT_PROTOCOL_STP:
// STP/SATA Frame
//task_context->type.stp.ncq_tag = this_request->ncq_tag;
break;
case SCU_TASK_CONTEXT_PROTOCOL_NONE:
/// @todo When do we set no protocol type?
break;
default:
// This should never happen since we build the IO requests
break;
}
// Check to see if we need to copy the task context buffer
// or have been building into the task context buffer
if (this_request->was_tag_assigned_by_user == FALSE)
{
scic_sds_controller_copy_task_context(
this_request->owning_controller, this_request
);
}
// Add to the post_context the io tag value
this_request->post_context |= scic_sds_io_tag_get_index(this_request->io_tag);
// Everything is good go ahead and change state
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_STARTED
);
return SCI_SUCCESS;
}
return SCI_FAILURE_INSUFFICIENT_RESOURCES;
}
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_terminate() request.
*
* Since the request has not yet been posted to the hardware the request
* transitions to the completed state.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
static
SCI_STATUS scic_sds_request_constructed_state_abort_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
// This request has been terminated by the user make sure that the correct
// status code is returned
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_TASK_ABORT,
SCI_FAILURE_IO_TERMINATED
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
return SCI_SUCCESS;
}
//*****************************************************************************
//* STARTED STATE HANDLERS
//*****************************************************************************
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_terminate() request.
*
* Since the request has been posted to the hardware the io request state is
* changed to the aborting state.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
SCI_STATUS scic_sds_request_started_state_abort_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
if (this_request->has_started_substate_machine)
{
sci_base_state_machine_stop(&this_request->started_substate_machine);
}
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_ABORTING
);
return SCI_SUCCESS;
}
/**
* @brief This method process TC (task context) completions for normal IO
* request (i.e. Task/Abort Completions of type 0). This method will
* update the SCIC_SDS_IO_REQUEST_T::status field.
*
* @param[in] this_request This parameter specifies the request for which
* a completion occurred.
* @param[in] completion_code This parameter specifies the completion code
* recieved from the SCU.
*
* @return none
*/
SCI_STATUS scic_sds_request_started_state_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
U8 data_present;
SCI_SSP_RESPONSE_IU_T * response_buffer;
/**
* @todo Any SDMA return code of other than 0 is bad
* decode 0x003C0000 to determine SDMA status
*/
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EARLY_RESP):
{
// There are times when the SCU hardware will return an early response
// because the io request specified more data than is returned by the
// target device (mode pages, inquiry data, etc.). We must check the
// response stats to see if this is truly a failed request or a good
// request that just got completed early.
SCI_SSP_RESPONSE_IU_T *response = (SCI_SSP_RESPONSE_IU_T *)
this_request->response_buffer;
scic_word_copy_with_swap(
this_request->response_buffer,
this_request->response_buffer,
sizeof(SCI_SSP_RESPONSE_IU_T) / sizeof(U32)
);
if (response->status == 0)
{
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS_IO_DONE_EARLY
);
}
else
{
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
}
}
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_CHECK_RESPONSE):
scic_word_copy_with_swap(
this_request->response_buffer,
this_request->response_buffer,
sizeof(SCI_SSP_RESPONSE_IU_T) / sizeof(U32)
);
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
break;
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RESP_LEN_ERR):
/// @todo With TASK_DONE_RESP_LEN_ERR is the response frame guaranteed
/// to be received before this completion status is posted?
response_buffer =
(SCI_SSP_RESPONSE_IU_T *)this_request->response_buffer;
data_present =
response_buffer->data_present & SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK;
if ((data_present == 0x01) || (data_present == 0x02))
{
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_IO_RESPONSE_VALID
);
}
else
{
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
}
break;
//only stp device gets suspended.
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_ACK_NAK_TO):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_PERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_DATA_LEN_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LL_ABORT_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_WD_LEN):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_MAX_PLD_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_RESP):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_SDBFIS):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_REG_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDB_ERR):
if (this_request->protocol == SCIC_STP_PROTOCOL)
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x returning REMOTE_DEVICE_RESET_REQUIRED for completion code 0x%x\n",
this_request, completion_code
));
scic_sds_request_set_status(
this_request,
SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT,
SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED
);
}
else
{
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST,
"SCIC IO Request 0x%x returning CONTROLLER_SPECIFIC_IO_ERR for completion code 0x%x\n",
this_request, completion_code
));
scic_sds_request_set_status(
this_request,
SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT,
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
}
break;
//both stp/ssp device gets suspended
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_LF_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_WRONG_DESTINATION):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_1):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_2):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_RESERVED_ABANDON_3):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_BAD_DESTINATION):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_ZONE_VIOLATION):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_STP_RESOURCES_BUSY):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_PROTOCOL_NOT_SUPPORTED):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_OPEN_REJECT_CONNECTION_RATE_NOT_SUPPORTED):
scic_sds_request_set_status(
this_request,
SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT,
SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED
);
break;
//neither ssp nor stp gets suspended.
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_NAK_CMD_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_XR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_XR_IU_LEN_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SDMA_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OFFSET_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_EXCESS_DATA):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_RESP_TO_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_UFI_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_FRM_TYPE_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_SMP_LL_RX_ERR):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_UNEXP_DATA):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_OPEN_FAIL):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_VIIT_ENTRY_NV):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_IIT_ENTRY_NV):
case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_RNCNV_OUTBOUND):
default:
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST | SCIC_LOG_OBJECT_STP_IO_REQUEST,
"SCIC IO Request 0x%x returning CONTROLLER_SPECIFIC_IO_ERR for completion code 0x%x\n",
this_request, completion_code
));
scic_sds_request_set_status(
this_request,
SCU_GET_COMPLETION_TL_STATUS(completion_code) >> SCU_COMPLETION_TL_STATUS_SHIFT,
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
break;
}
/**
* @todo This is probably wrong for ACK/NAK timeout conditions
*/
// In all cases we will treat this as the completion of the IO request.
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
return SCI_SUCCESS;
}
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_frame_handler() request.
*
* This method first determines the frame type received. If this is a
* response frame then the response data is copied to the io request response
* buffer for processing at completion time.
*
* If the frame type is not a response buffer an error is logged.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
* @param[in] frame_index This is the index of the unsolicited frame to be
* processed.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
* @retval SCI_FAILURE_INVALID_PARAMETER_VALUE
*/
static
SCI_STATUS scic_sds_request_started_state_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
SCI_STATUS status;
SCI_SSP_FRAME_HEADER_T *frame_header;
/// @todo If this is a response frame we must record that we received it
status = scic_sds_unsolicited_frame_control_get_header(
&(scic_sds_request_get_controller(this_request)->uf_control),
frame_index,
(void**) &frame_header
);
if (frame_header->frame_type == SCI_SAS_RESPONSE_FRAME)
{
SCI_SSP_RESPONSE_IU_T *response_buffer;
status = scic_sds_unsolicited_frame_control_get_buffer(
&(scic_sds_request_get_controller(this_request)->uf_control),
frame_index,
(void**) &response_buffer
);
scic_word_copy_with_swap(
this_request->response_buffer,
(U32 *)response_buffer,
sizeof(SCI_SSP_RESPONSE_IU_T)
);
response_buffer = (SCI_SSP_RESPONSE_IU_T *)this_request->response_buffer;
if (
(response_buffer->data_present == 0x01)
|| (response_buffer->data_present == 0x02)
)
{
scic_sds_request_set_status(
this_request,
SCU_TASK_DONE_CHECK_RESPONSE,
SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR
);
}
else
{
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_GOOD, SCI_SUCCESS
);
}
}
else
{
// This was not a response frame why did it get forwarded?
SCIC_LOG_ERROR((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_SSP_IO_REQUEST,
"SCIC IO Request 0x%x received unexpected frame %d type 0x%02x\n",
this_request, frame_index, frame_header->frame_type
));
}
// In any case we are done with this frame buffer return it to the
// controller
scic_sds_controller_release_frame(
this_request->owning_controller, frame_index
);
return SCI_SUCCESS;
}
//*****************************************************************************
//* COMPLETED STATE HANDLERS
//*****************************************************************************
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_complete() request.
*
* This method frees up any io request resources that have been allocated and
* transitions the request to its final state.
*
* @todo Consider stopping the state machine instead of transitioning to the
* final state?
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
static
SCI_STATUS scic_sds_request_completed_state_complete_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
if (this_request->was_tag_assigned_by_user != TRUE)
{
scic_controller_free_io_tag(
this_request->owning_controller, this_request->io_tag
);
}
if (this_request->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX)
{
scic_sds_controller_release_frame(
this_request->owning_controller, this_request->saved_rx_frame_index);
}
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_FINAL
);
scic_sds_request_deinitialize_state_logging(this_request);
return SCI_SUCCESS;
}
//*****************************************************************************
//* ABORTING STATE HANDLERS
//*****************************************************************************
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_terminate() request.
*
* This method is the io request aborting state abort handlers. On receipt of
* a multiple terminate requests the io request will transition to the
* completed state. This should not happen in normal operation.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
static
SCI_STATUS scic_sds_request_aborting_state_abort_handler(
SCI_BASE_REQUEST_T *request
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)request;
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
return SCI_SUCCESS;
}
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_task_completion() request.
*
* This method decodes the completion type waiting for the abort task complete
* notification. When the abort task complete is received the io request
* transitions to the completed state.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
static
SCI_STATUS scic_sds_request_aborting_state_tc_completion_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 completion_code
)
{
SCIC_LOG_TRACE((
sci_base_object_get_logger(this_request),
SCIC_LOG_OBJECT_TASK_MANAGEMENT,
"scic_sds_request_aborting_state_tc_completion_handler(0x%x,0x%x) enter\n",
this_request, completion_code
));
switch (SCU_GET_COMPLETION_TL_STATUS(completion_code))
{
case (SCU_TASK_DONE_GOOD << SCU_COMPLETION_TL_STATUS_SHIFT):
case (SCU_TASK_DONE_TASK_ABORT << SCU_COMPLETION_TL_STATUS_SHIFT):
scic_sds_request_set_status(
this_request, SCU_TASK_DONE_TASK_ABORT, SCI_FAILURE_IO_TERMINATED
);
sci_base_state_machine_change_state(
&this_request->parent.state_machine,
SCI_BASE_REQUEST_STATE_COMPLETED
);
break;
default:
// Unless we get some strange error wait for the task abort to complete
// TODO: Should there be a state change for this completion?
break;
}
return SCI_SUCCESS;
}
/**
* This method implements the action to be taken when an SCIC_SDS_IO_REQUEST_T
* object receives a scic_sds_request_frame_handler() request.
*
* This method discards the unsolicited frame since we are waiting for the
* abort task completion.
*
* @param[in] request This is the SCI_BASE_REQUEST_T object that is cast to
* the SCIC_SDS_IO_REQUEST_T object for which the start operation is
* requested.
*
* @return SCI_STATUS
* @retval SCI_SUCCESS
*/
static
SCI_STATUS scic_sds_request_aborting_state_frame_handler(
SCIC_SDS_REQUEST_T * this_request,
U32 frame_index
)
{
// TODO: Is it even possible to get an unsolicited frame in the aborting state?
scic_sds_controller_release_frame(
this_request->owning_controller, frame_index);
return SCI_SUCCESS;
}
// ---------------------------------------------------------------------------
SCIC_SDS_IO_REQUEST_STATE_HANDLER_T
scic_sds_request_state_handler_table[SCI_BASE_REQUEST_MAX_STATES] =
{
// SCI_BASE_REQUEST_STATE_INITIAL
{
{
scic_sds_request_default_start_handler,
scic_sds_request_default_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCI_BASE_REQUEST_STATE_CONSTRUCTED
{
{
scic_sds_request_constructed_state_start_handler,
scic_sds_request_constructed_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCI_BASE_REQUEST_STATE_STARTED
{
{
scic_sds_request_default_start_handler,
scic_sds_request_started_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_started_state_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_started_state_frame_handler
},
// SCI_BASE_REQUEST_STATE_COMPLETED
{
{
scic_sds_request_default_start_handler,
scic_sds_request_default_abort_handler,
scic_sds_request_completed_state_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
},
// SCI_BASE_REQUEST_STATE_ABORTING
{
{
scic_sds_request_default_start_handler,
scic_sds_request_aborting_state_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_aborting_state_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_aborting_state_frame_handler,
},
// SCI_BASE_REQUEST_STATE_FINAL
{
{
scic_sds_request_default_start_handler,
scic_sds_request_default_abort_handler,
scic_sds_request_default_complete_handler,
scic_sds_request_default_destruct_handler
},
scic_sds_request_default_tc_completion_handler,
scic_sds_request_default_event_handler,
scic_sds_request_default_frame_handler
}
};
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_INITIAL state. This state is entered when the
* initial base request is constructed. Entry into the initial state sets all
* handlers for the io request object to their default handlers.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occurring.
*
* @return none
*/
static
void scic_sds_request_initial_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_INITIAL
);
}
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_CONSTRUCTED state.
* The method sets the state handlers for the the constructed state.
*
* @param[in] object The io request object that is to enter the constructed
* state.
*
* @return none
*/
static
void scic_sds_request_constructed_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_CONSTRUCTED
);
}
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_STARTED state. If the io request object type is a
* SCSI Task request we must enter the started substate machine.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occuring. This is cast into a
* SCIC_SDS_IO_REQUEST object.
*
* @return none
*/
static
void scic_sds_request_started_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_STARTED
);
// Most of the request state machines have a started substate machine so
// start its execution on the entry to the started state.
if (this_request->has_started_substate_machine == TRUE)
sci_base_state_machine_start(&this_request->started_substate_machine);
}
/**
* This method implements the actions taken when exiting the
* SCI_BASE_REQUEST_STATE_STARTED state. For task requests the action will be
* to stop the started substate machine.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occuring. This object is cast into a
* SCIC_SDS_IO_REQUEST object.
*
* @return none
*/
static
void scic_sds_request_started_state_exit(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
if (this_request->has_started_substate_machine == TRUE)
sci_base_state_machine_stop(&this_request->started_substate_machine);
}
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_COMPLETED state. This state is entered when the
* SCIC_SDS_IO_REQUEST has completed. The method will decode the request
* completion status and convert it to an SCI_STATUS to return in the
* completion callback function.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occuring. This object is cast into a
* SCIC_SDS_IO_REQUEST object.
*
* @return none
*/
static
void scic_sds_request_completed_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_COMPLETED
);
// Tell the SCI_USER that the IO request is complete
if (this_request->is_task_management_request == FALSE)
{
scic_cb_io_request_complete(
scic_sds_request_get_controller(this_request),
scic_sds_request_get_device(this_request),
this_request,
this_request->sci_status
);
}
else
{
scic_cb_task_request_complete(
scic_sds_request_get_controller(this_request),
scic_sds_request_get_device(this_request),
this_request,
this_request->sci_status
);
}
}
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_ABORTING state.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occuring. This object is cast into a
* SCIC_SDS_IO_REQUEST object.
*
* @return none
*/
static
void scic_sds_request_aborting_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
// Setting the abort bit in the Task Context is required by the silicon.
this_request->task_context_buffer->abort = 1;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_ABORTING
);
}
/**
* This method implements the actions taken when entering the
* SCI_BASE_REQUEST_STATE_FINAL state. The only action required is to put the
* state handlers in place.
*
* @param[in] object This parameter specifies the base object for which the
* state transition is occuring. This is cast into a
* SCIC_SDS_IO_REQUEST object.
*
* @return none
*/
static
void scic_sds_request_final_state_enter(
SCI_BASE_OBJECT_T *object
)
{
SCIC_SDS_REQUEST_T *this_request = (SCIC_SDS_REQUEST_T *)object;
SET_STATE_HANDLER(
this_request,
scic_sds_request_state_handler_table,
SCI_BASE_REQUEST_STATE_FINAL
);
}
// ---------------------------------------------------------------------------
SCI_BASE_STATE_T
scic_sds_request_state_table[SCI_BASE_REQUEST_MAX_STATES] =
{
{
SCI_BASE_REQUEST_STATE_INITIAL,
scic_sds_request_initial_state_enter,
NULL
},
{
SCI_BASE_REQUEST_STATE_CONSTRUCTED,
scic_sds_request_constructed_state_enter,
NULL
},
{
SCI_BASE_REQUEST_STATE_STARTED,
scic_sds_request_started_state_enter,
scic_sds_request_started_state_exit
},
{
SCI_BASE_REQUEST_STATE_COMPLETED,
scic_sds_request_completed_state_enter,
NULL
},
{
SCI_BASE_REQUEST_STATE_ABORTING,
scic_sds_request_aborting_state_enter,
NULL
},
{
SCI_BASE_REQUEST_STATE_FINAL,
scic_sds_request_final_state_enter,
NULL
}
};