Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mvs/@/amd64/compile/hs32/modules/usr/src/sys/modules/sem/@/dev/de/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mvs/@/amd64/compile/hs32/modules/usr/src/sys/modules/sem/@/dev/de/dc21040reg.h |
/* $NetBSD: dc21040reg.h,v 1.15 1998/05/22 18:50:59 matt Exp $ */ /* $FreeBSD: release/9.1.0/sys/dev/de/dc21040reg.h 97748 2002-06-02 20:05:59Z schweikh $ */ /*- * Copyright (c) 1994, 1995, 1996 Matt Thomas <matt@3am-software.com> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Id: dc21040reg.h,v 1.24 1997/05/16 19:47:09 thomas Exp */ #if !defined(_DC21040_H) #define _DC21040_H #if defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN #define TULIP_BITFIELD2(a, b) b, a #define TULIP_BITFIELD3(a, b, c) c, b, a #define TULIP_BITFIELD4(a, b, c, d) d, c, b, a #else #define TULIP_BITFIELD2(a, b) a, b #define TULIP_BITFIELD3(a, b, c) a, b, c #define TULIP_BITFIELD4(a, b, c, d) a, b, c, d #endif typedef struct { u_int32_t d_status; u_int32_t TULIP_BITFIELD3(d_length1 : 11, d_length2 : 11, d_flag : 10); u_int32_t d_addr1; u_int32_t d_addr2; } tulip_desc_t; #define TULIP_DSTS_OWNER 0x80000000 /* Owner (1 = 21040) */ #define TULIP_DSTS_ERRSUM 0x00008000 /* Error Summary */ /* * Transmit Status */ #define TULIP_DSTS_TxBABBLE 0x00004000 /* Transmitter Babbled */ #define TULIP_DSTS_TxCARRLOSS 0x00000800 /* Carrier Loss */ #define TULIP_DSTS_TxNOCARR 0x00000400 /* No Carrier */ #define TULIP_DSTS_TxLATECOLL 0x00000200 /* Late Collision */ #define TULIP_DSTS_TxEXCCOLL 0x00000100 /* Excessive Collisions */ #define TULIP_DSTS_TxNOHRTBT 0x00000080 /* No Heartbeat */ #define TULIP_DSTS_TxCOLLMASK 0x00000078 /* Collision Count (mask) */ #define TULIP_DSTS_V_TxCOLLCNT 0x00000003 /* Collision Count (bit) */ #define TULIP_DSTS_TxLINKFAIL 0x00000004 /* Link Failure */ #define TULIP_DSTS_TxUNDERFLOW 0x00000002 /* Underflow Error */ #define TULIP_DSTS_TxDEFERRED 0x00000001 /* Initially Deferred */ /* * Receive Status */ #define TULIP_DSTS_RxBADLENGTH 0x00004000 /* Length Error */ #define TULIP_DSTS_RxDATATYPE 0x00003000 /* Data Type */ #define TULIP_DSTS_RxRUNT 0x00000800 /* Runt Frame */ #define TULIP_DSTS_RxMULTICAST 0x00000400 /* Multicast Frame */ #define TULIP_DSTS_RxFIRSTDESC 0x00000200 /* First Descriptor */ #define TULIP_DSTS_RxLASTDESC 0x00000100 /* Last Descriptor */ #define TULIP_DSTS_RxTOOLONG 0x00000080 /* Frame Too Long */ #define TULIP_DSTS_RxCOLLSEEN 0x00000040 /* Collision Seen */ #define TULIP_DSTS_RxFRAMETYPE 0x00000020 /* Frame Type */ #define TULIP_DSTS_RxWATCHDOG 0x00000010 /* Receive Watchdog */ #define TULIP_DSTS_RxDRBBLBIT 0x00000004 /* Dribble Bit */ #define TULIP_DSTS_RxBADCRC 0x00000002 /* CRC Error */ #define TULIP_DSTS_RxOVERFLOW 0x00000001 /* Overflow */ #define TULIP_DFLAG_ENDRING 0x0008 /* End of Transmit Ring */ #define TULIP_DFLAG_CHAIN 0x0004 /* Chain using d_addr2 */ #define TULIP_DFLAG_TxWANTINTR 0x0200 /* Signal Interrupt on Completion */ #define TULIP_DFLAG_TxLASTSEG 0x0100 /* Last Segment */ #define TULIP_DFLAG_TxFIRSTSEG 0x0080 /* First Segment */ #define TULIP_DFLAG_TxINVRSFILT 0x0040 /* Inverse Filtering */ #define TULIP_DFLAG_TxSETUPPKT 0x0020 /* Setup Packet */ #define TULIP_DFLAG_TxHASCRC 0x0010 /* Don't Append the CRC */ #define TULIP_DFLAG_TxNOPADDING 0x0002 /* Don't AutoPad */ #define TULIP_DFLAG_TxHASHFILT 0x0001 /* Hash/Perfect Filtering */ /* * The 21040 Registers (IO Space Addresses) */ #define TULIP_REG_BUSMODE 0x00 /* CSR0 -- Bus Mode */ #define TULIP_REG_TXPOLL 0x08 /* CSR1 -- Transmit Poll Demand */ #define TULIP_REG_RXPOLL 0x10 /* CSR2 -- Receive Poll Demand */ #define TULIP_REG_RXLIST 0x18 /* CSR3 -- Receive List Base Addr */ #define TULIP_REG_TXLIST 0x20 /* CSR4 -- Transmit List Base Addr */ #define TULIP_REG_STATUS 0x28 /* CSR5 -- Status */ #define TULIP_REG_CMD 0x30 /* CSR6 -- Command */ #define TULIP_REG_INTR 0x38 /* CSR7 -- Interrupt Control */ #define TULIP_REG_MISSES 0x40 /* CSR8 -- Missed Frame Counter */ #define TULIP_REG_ADDRROM 0x48 /* CSR9 -- ENET ROM Register */ #define TULIP_REG_RSRVD 0x50 /* CSR10 -- Reserved */ #define TULIP_REG_FULL_DUPLEX 0x58 /* CSR11 -- Full Duplex */ #define TULIP_REG_SIA_STATUS 0x60 /* CSR12 -- SIA Status */ #define TULIP_REG_SIA_CONN 0x68 /* CSR13 -- SIA Connectivity */ #define TULIP_REG_SIA_TXRX 0x70 /* CSR14 -- SIA Tx Rx */ #define TULIP_REG_SIA_GEN 0x78 /* CSR15 -- SIA General */ /* * CSR5 -- Status Register * CSR7 -- Interrupt Control */ #define TULIP_STS_ERRORMASK 0x03800000L /* ( R) Error Bits (Valid when SYSERROR is set) */ #define TULIP_STS_ERR_PARITY 0x00000000L /* 000 - Parity Error (Perform Reset) */ #define TULIP_STS_ERR_MASTER 0x00800000L /* 001 - Master Abort */ #define TULIP_STS_ERR_TARGET 0x01000000L /* 010 - Target Abort */ #define TULIP_STS_ERR_SHIFT 23 #define TULIP_STS_TXSTATEMASK 0x00700000L /* ( R) Transmission Process State */ #define TULIP_STS_TXS_RESET 0x00000000L /* 000 - Rset or transmit jabber expired */ #define TULIP_STS_TXS_FETCH 0x00100000L /* 001 - Fetching transmit descriptor */ #define TULIP_STS_TXS_WAITEND 0x00200000L /* 010 - Wait for end of transmission */ #define TULIP_STS_TXS_READING 0x00300000L /* 011 - Read buffer and enqueue data */ #define TULIP_STS_TXS_RSRVD 0x00400000L /* 100 - Reserved */ #define TULIP_STS_TXS_SETUP 0x00500000L /* 101 - Setup Packet */ #define TULIP_STS_TXS_SUSPEND 0x00600000L /* 110 - Transmit FIFO underflow or an unavailable transmit descriptor */ #define TULIP_STS_TXS_CLOSE 0x00700000L /* 111 - Close transmit descriptor */ #define TULIP_STS_RXSTATEMASK 0x000E0000L /* ( R) Receive Process State*/ #define TULIP_STS_RXS_STOPPED 0x00000000L /* 000 - Stopped */ #define TULIP_STS_RXS_FETCH 0x00020000L /* 001 - Running -- Fetch receive descriptor */ #define TULIP_STS_RXS_ENDCHECK 0x00040000L /* 010 - Running -- Check for end of receive packet before prefetch of next descriptor */ #define TULIP_STS_RXS_WAIT 0x00060000L /* 011 - Running -- Wait for receive packet */ #define TULIP_STS_RXS_SUSPEND 0x00080000L /* 100 - Suspended -- As a result of unavailable receive buffers */ #define TULIP_STS_RXS_CLOSE 0x000A0000L /* 101 - Running -- Close receive descriptor */ #define TULIP_STS_RXS_FLUSH 0x000C0000L /* 110 - Running -- Flush the current frame from the receive FIFO as a result of an unavailable receive buffer */ #define TULIP_STS_RXS_DEQUEUE 0x000E0000L /* 111 - Running -- Dequeue the receive frame from the receive FIFO into the receive buffer. */ #define TULIP_STS_NORMALINTR 0x00010000L /* (RW) Normal Interrupt */ #define TULIP_STS_ABNRMLINTR 0x00008000L /* (RW) Abnormal Interrupt */ #define TULIP_STS_SYSERROR 0x00002000L /* (RW) System Error */ #define TULIP_STS_LINKFAIL 0x00001000L /* (RW) Link Failure (21040) */ #define TULIP_STS_FULDPLXSHRT 0x00000800L /* (RW) Full Duplex Short Fram Rcvd (21040) */ #define TULIP_STS_GPTIMEOUT 0x00000800L /* (RW) General Purpose Timeout (21140) */ #define TULIP_STS_AUI 0x00000400L /* (RW) AUI/TP Switch (21040) */ #define TULIP_STS_RXTIMEOUT 0x00000200L /* (RW) Receive Watchbog Timeout */ #define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receive Process Stopped */ #define TULIP_STS_RXNOBUF 0x00000080L /* (RW) Receive Buffer Unavailable */ #define TULIP_STS_RXINTR 0x00000040L /* (RW) Receive Interrupt */ #define TULIP_STS_TXUNDERFLOW 0x00000020L /* (RW) Transmit Underflow */ #define TULIP_STS_LINKPASS 0x00000010L /* (RW) LinkPass (21041) */ #define TULIP_STS_TXBABBLE 0x00000008L /* (RW) Transmit Jabber Timeout */ #define TULIP_STS_TXNOBUF 0x00000004L /* (RW) Transmit Buffer Unavailable */ #define TULIP_STS_TXSTOPPED 0x00000002L /* (RW) Transmit Process Stopped */ #define TULIP_STS_TXINTR 0x00000001L /* (RW) Transmit Interrupt */ /* * CSR6 -- Command (Operation Mode) Register */ #define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */ #define TULIP_CMD_SCRAMBLER 0x01000000L /* (RW) Scrambler Mode (21140) */ #define TULIP_CMD_PCSFUNCTION 0x00800000L /* (RW) PCS Function (21140) */ #define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */ #define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */ #define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */ #define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */ #define TULIP_CMD_ENHCAPTEFFCT 0x00040000L /* (RW) Enhanced Capture Effecty (21041) */ #define TULIP_CMD_CAPTREFFCT 0x00020000L /* (RW) Capture Effect (!802.3) */ #define TULIP_CMD_BACKPRESSURE 0x00010000L /* (RW) Back Pressure (!802.3) (21040) */ #define TULIP_CMD_THRESHOLDCTL 0x0000C000L /* (RW) Threshold Control */ #define TULIP_CMD_THRSHLD72 0x00000000L /* 00 - 72 Bytes */ #define TULIP_CMD_THRSHLD96 0x00004000L /* 01 - 96 Bytes */ #define TULIP_CMD_THRSHLD128 0x00008000L /* 10 - 128 bytes */ #define TULIP_CMD_THRSHLD160 0x0000C000L /* 11 - 160 Bytes */ #define TULIP_CMD_TXRUN 0x00002000L /* (RW) Start/Stop Transmitter */ #define TULIP_CMD_FORCECOLL 0x00001000L /* (RW) Force Collisions */ #define TULIP_CMD_OPERMODE 0x00000C00L /* (RW) Operating Mode */ #define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */ #define TULIP_CMD_FLAKYOSCDIS 0x00000100L /* (RW) Flakey Oscillator Disable */ #define TULIP_CMD_ALLMULTI 0x00000080L /* (RW) Pass All Multicasts */ #define TULIP_CMD_PROMISCUOUS 0x00000040L /* (RW) Promiscuous Mode */ #define TULIP_CMD_BACKOFFCTR 0x00000020L /* (RW) Start/Stop Backoff Counter (!802.3) */ #define TULIP_CMD_INVFILTER 0x00000010L /* (R ) Inverse Filtering */ #define TULIP_CMD_PASSBADPKT 0x00000008L /* (RW) Pass Bad Frames */ #define TULIP_CMD_HASHONLYFLTR 0x00000004L /* (R ) Hash Only Filtering */ #define TULIP_CMD_RXRUN 0x00000002L /* (RW) Start/Stop Receive Filtering */ #define TULIP_CMD_HASHPRFCTFLTR 0x00000001L /* (R ) Hash/Perfect Receive Filtering */ #define TULIP_SIASTS_OTHERRXACTIVITY 0x00000200L #define TULIP_SIASTS_RXACTIVITY 0x00000100L #define TULIP_SIASTS_LINKFAIL 0x00000004L #define TULIP_SIASTS_LINK100FAIL 0x00000002L #define TULIP_SIACONN_RESET 0x00000000L /* * 21040 SIA definitions */ #define TULIP_21040_PROBE_10BASET_TIMEOUT 2500 #define TULIP_21040_PROBE_AUIBNC_TIMEOUT 300 #define TULIP_21040_PROBE_EXTSIA_TIMEOUT 300 #define TULIP_21040_SIACONN_10BASET 0x0000EF01L #define TULIP_21040_SIATXRX_10BASET 0x0000FFFFL #define TULIP_21040_SIAGEN_10BASET 0x00000000L #define TULIP_21040_SIACONN_10BASET_FD 0x0000EF01L #define TULIP_21040_SIATXRX_10BASET_FD 0x0000FFFDL #define TULIP_21040_SIAGEN_10BASET_FD 0x00000000L #define TULIP_21040_SIACONN_AUIBNC 0x0000EF09L #define TULIP_21040_SIATXRX_AUIBNC 0x00000705L #define TULIP_21040_SIAGEN_AUIBNC 0x00000006L #define TULIP_21040_SIACONN_EXTSIA 0x00003041L #define TULIP_21040_SIATXRX_EXTSIA 0x00000000L #define TULIP_21040_SIAGEN_EXTSIA 0x00000006L /* * 21041 SIA definitions */ #define TULIP_21041_PROBE_10BASET_TIMEOUT 2500 #define TULIP_21041_PROBE_AUIBNC_TIMEOUT 300 #define TULIP_21041_SIACONN_10BASET 0x0000EF01L #define TULIP_21041_SIATXRX_10BASET 0x0000FF3FL #define TULIP_21041_SIAGEN_10BASET 0x00000000L #define TULIP_21041P2_SIACONN_10BASET 0x0000EF01L #define TULIP_21041P2_SIATXRX_10BASET 0x0000FFFFL #define TULIP_21041P2_SIAGEN_10BASET 0x00000000L #define TULIP_21041_SIACONN_10BASET_FD 0x0000EF01L #define TULIP_21041_SIATXRX_10BASET_FD 0x0000FF3DL #define TULIP_21041_SIAGEN_10BASET_FD 0x00000000L #define TULIP_21041P2_SIACONN_10BASET_FD 0x0000EF01L #define TULIP_21041P2_SIATXRX_10BASET_FD 0x0000FFFFL #define TULIP_21041P2_SIAGEN_10BASET_FD 0x00000000L #define TULIP_21041_SIACONN_AUI 0x0000EF09L #define TULIP_21041_SIATXRX_AUI 0x0000F73DL #define TULIP_21041_SIAGEN_AUI 0x0000000EL #define TULIP_21041P2_SIACONN_AUI 0x0000EF09L #define TULIP_21041P2_SIATXRX_AUI 0x0000F7FDL #define TULIP_21041P2_SIAGEN_AUI 0x0000000EL #define TULIP_21041_SIACONN_BNC 0x0000EF09L #define TULIP_21041_SIATXRX_BNC 0x0000F73DL #define TULIP_21041_SIAGEN_BNC 0x00000006L #define TULIP_21041P2_SIACONN_BNC 0x0000EF09L #define TULIP_21041P2_SIATXRX_BNC 0x0000F7FDL #define TULIP_21041P2_SIAGEN_BNC 0x00000006L /* * 21142 SIA definitions */ #define TULIP_21142_PROBE_10BASET_TIMEOUT 2500 #define TULIP_21142_PROBE_AUIBNC_TIMEOUT 300 #define TULIP_21142_SIACONN_10BASET 0x00000001L #define TULIP_21142_SIATXRX_10BASET 0x00007F3FL #define TULIP_21142_SIAGEN_10BASET 0x00000008L #define TULIP_21142_SIACONN_10BASET_FD 0x00000001L #define TULIP_21142_SIATXRX_10BASET_FD 0x00007F3DL #define TULIP_21142_SIAGEN_10BASET_FD 0x00000008L #define TULIP_21142_SIACONN_AUI 0x00000009L #define TULIP_21142_SIATXRX_AUI 0x00000705L #define TULIP_21142_SIAGEN_AUI 0x0000000EL #define TULIP_21142_SIACONN_BNC 0x00000009L #define TULIP_21142_SIATXRX_BNC 0x00000705L #define TULIP_21142_SIAGEN_BNC 0x00000006L #define TULIP_WATCHDOG_TXDISABLE 0x00000001L #define TULIP_WATCHDOG_RXDISABLE 0x00000010L #define TULIP_BUSMODE_SWRESET 0x00000001L #define TULIP_BUSMODE_DESCSKIPLEN_MASK 0x0000007CL #define TULIP_BUSMODE_BIGENDIAN 0x00000080L #define TULIP_BUSMODE_BURSTLEN_MASK 0x00003F00L #define TULIP_BUSMODE_BURSTLEN_DEFAULT 0x00000000L #define TULIP_BUSMODE_BURSTLEN_1LW 0x00000100L #define TULIP_BUSMODE_BURSTLEN_2LW 0x00000200L #define TULIP_BUSMODE_BURSTLEN_4LW 0x00000400L #define TULIP_BUSMODE_BURSTLEN_8LW 0x00000800L #define TULIP_BUSMODE_BURSTLEN_16LW 0x00001000L #define TULIP_BUSMODE_BURSTLEN_32LW 0x00002000L #define TULIP_BUSMODE_CACHE_NOALIGN 0x00000000L #define TULIP_BUSMODE_CACHE_ALIGN8 0x00004000L #define TULIP_BUSMODE_CACHE_ALIGN16 0x00008000L #define TULIP_BUSMODE_CACHE_ALIGN32 0x0000C000L #define TULIP_BUSMODE_TXPOLL_NEVER 0x00000000L #define TULIP_BUSMODE_TXPOLL_200000ns 0x00020000L #define TULIP_BUSMODE_TXPOLL_800000ns 0x00040000L #define TULIP_BUSMODE_TXPOLL_1600000ns 0x00060000L #define TULIP_BUSMODE_TXPOLL_12800ns 0x00080000L /* 21041 only */ #define TULIP_BUSMODE_TXPOLL_25600ns 0x000A0000L /* 21041 only */ #define TULIP_BUSMODE_TXPOLL_51200ns 0x000C0000L /* 21041 only */ #define TULIP_BUSMODE_TXPOLL_102400ns 0x000E0000L /* 21041 only */ #define TULIP_BUSMODE_DESC_BIGENDIAN 0x00100000L /* 21041 only */ #define TULIP_BUSMODE_READMULTIPLE 0x00200000L /* */ #define TULIP_REG_CFDA 0x40 #define TULIP_CFDA_SLEEP 0x80000000L #define TULIP_CFDA_SNOOZE 0x40000000L #define TULIP_GP_PINSET 0x00000100L /* * These are the defintitions used for the DEC 21140 * evaluation board. */ #define TULIP_GP_EB_PINS 0x0000001F /* General Purpose Pin directions */ #define TULIP_GP_EB_OK10 0x00000080 /* 10 Mb/sec Signal Detect gep<7> */ #define TULIP_GP_EB_OK100 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */ #define TULIP_GP_EB_INIT 0x0000000B /* No loopback --- point-to-point */ /* * These are the defintitions used for the SMC9332 (21140) board. */ #define TULIP_GP_SMC_9332_PINS 0x0000003F /* General Purpose Pin directions */ #define TULIP_GP_SMC_9332_OK10 0x00000080 /* 10 Mb/sec Signal Detect gep<7> */ #define TULIP_GP_SMC_9332_OK100 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */ #define TULIP_GP_SMC_9332_INIT 0x00000009 /* No loopback --- point-to-point */ /* * There are the definitions used for the DEC DE500 * 10/100 family of boards */ #define TULIP_GP_DE500_PINS 0x0000001FL #define TULIP_GP_DE500_LINK_PASS 0x00000080L #define TULIP_GP_DE500_SYM_LINK 0x00000040L #define TULIP_GP_DE500_SIGNAL_DETECT 0x00000020L #define TULIP_GP_DE500_PHY_RESET 0x00000010L #define TULIP_GP_DE500_HALFDUPLEX 0x00000008L #define TULIP_GP_DE500_PHY_LOOPBACK 0x00000004L #define TULIP_GP_DE500_FORCE_LED 0x00000002L #define TULIP_GP_DE500_FORCE_100 0x00000001L /* * These are the defintitions used for the Cogent EM100 * 21140 board. */ #define TULIP_GP_EM100_PINS 0x0000003F /* General Purpose Pin directions */ #define TULIP_GP_EM100_INIT 0x00000009 /* No loopback --- point-to-point */ #define TULIP_COGENT_EM100TX_ID 0x12 #define TULIP_COGENT_EM100FX_ID 0x15 /* * These are the defintitions used for the Znyx ZX342 * 10/100 board */ #define TULIP_ZNYX_ID_ZX312 0x0602 #define TULIP_ZNYX_ID_ZX312T 0x0622 #define TULIP_ZNYX_ID_ZX314_INTA 0x0701 #define TULIP_ZNYX_ID_ZX314 0x0711 #define TULIP_ZNYX_ID_ZX315_INTA 0x0801 #define TULIP_ZNYX_ID_ZX315 0x0811 #define TULIP_ZNYX_ID_ZX342 0x0901 #define TULIP_ZNYX_ID_ZX342B 0x0921 #define TULIP_ZNYX_ID_ZX342_X3 0x0902 #define TULIP_ZNYX_ID_ZX342_X4 0x0903 #define TULIP_ZNYX_ID_ZX344 0x0A01 #define TULIP_ZNYX_ID_ZX351 0x0B01 #define TULIP_ZNYX_ID_ZX345 0x0C01 #define TULIP_ZNYX_ID_ZX311 0x0D01 #define TULIP_ZNYX_ID_ZX346 0x0E01 #define TULIP_GP_ZX34X_PINS 0x0000001F /* General Purpose Pin directions */ #define TULIP_GP_ZX344_PINS 0x0000000B /* General Purpose Pin directions */ #define TULIP_GP_ZX345_PINS 0x00000003 /* General Purpose Pin directions */ #define TULIP_GP_ZX346_PINS 0x00000043 /* General Purpose Pin directions */ #define TULIP_GP_ZX34X_LNKFAIL 0x00000080 /* 10Mb/s Link Failure */ #define TULIP_GP_ZX34X_SYMDET 0x00000040 /* 100Mb/s Symbol Detect */ #define TULIP_GP_ZX345_PHYACT 0x00000040 /* PHY Activity */ #define TULIP_GP_ZX34X_SIGDET 0x00000020 /* 100Mb/s Signal Detect */ #define TULIP_GP_ZX346_AUTONEG_ENABLED 0x00000020 /* 802.3u autoneg enabled */ #define TULIP_GP_ZX342_COLENA 0x00000008 /* 10t Ext LB */ #define TULIP_GP_ZX344_ROTINT 0x00000008 /* PPB IRQ rotation */ #define TULIP_GP_ZX345_SPEED10 0x00000008 /* 10Mb speed detect */ #define TULIP_GP_ZX346_SPEED100 0x00000008 /* 100Mb speed detect */ #define TULIP_GP_ZX34X_NCOLENA 0x00000004 /* 10t Int LB */ #define TULIP_GP_ZX34X_RXMATCH 0x00000004 /* RX Match */ #define TULIP_GP_ZX346_FULLDUPLEX 0x00000004 /* Full Duplex Sensed */ #define TULIP_GP_ZX34X_LB102 0x00000002 /* 100tx twister LB */ #define TULIP_GP_ZX34X_NLB101 0x00000001 /* PDT/PDR LB */ #define TULIP_GP_ZX34X_INIT 0x00000009 /* * Asante's stuff... */ #define TULIP_GP_ASANTE_PINS 0x000000bf /* GP pin config */ #define TULIP_GP_ASANTE_PHYRESET 0x00000008 /* Reset PHY */ /* * ACCTON EN1207 specialties */ #define TULIP_CSR8_EN1207 0x08 #define TULIP_CSR9_EN1207 0x00 #define TULIP_CSR10_EN1207 0x03 #define TULIP_CSR11_EN1207 0x1F #define TULIP_GP_EN1207_BNC_INIT 0x0000011B #define TULIP_GP_EN1207_UTP_INIT 0x9E00000B #define TULIP_GP_EN1207_100_INIT 0x6D00031B /* * SROM definitions for the 21140 and 21041. */ #define SROMXREG 0x0400 #define SROMSEL 0x0800 #define SROMRD 0x4000 #define SROMWR 0x2000 #define SROMDIN 0x0008 #define SROMDOUT 0x0004 #define SROMDOUTON 0x0004 #define SROMDOUTOFF 0x0004 #define SROMCLKON 0x0002 #define SROMCLKOFF 0x0002 #define SROMCSON 0x0001 #define SROMCSOFF 0x0001 #define SROMCS 0x0001 #define SROMCMD_MODE 4 #define SROMCMD_WR 5 #define SROMCMD_RD 6 #define SROM_BITWIDTH 6 /* * MII Definitions for the 21041 and 21140/21140A/21142 */ #define MII_PREAMBLE (~0) #define MII_TEST 0xAAAAAAAA #define MII_RDCMD 0xF6 /* 1111.0110 */ #define MII_WRCMD 0xF5 /* 1111.0101 */ #define MII_DIN 0x00080000 #define MII_RD 0x00040000 #define MII_WR 0x00000000 #define MII_DOUT 0x00020000 #define MII_CLK 0x00010000 #define MII_CLKON MII_CLK #define MII_CLKOFF MII_CLK #define PHYREG_CONTROL 0 #define PHYREG_STATUS 1 #define PHYREG_IDLOW 2 #define PHYREG_IDHIGH 3 #define PHYREG_AUTONEG_ADVERTISEMENT 4 #define PHYREG_AUTONEG_ABILITIES 5 #define PHYREG_AUTONEG_EXPANSION 6 #define PHYREG_AUTONEG_NEXTPAGE 7 #define PHYSTS_100BASET4 0x8000 #define PHYSTS_100BASETX_FD 0x4000 #define PHYSTS_100BASETX 0x2000 #define PHYSTS_10BASET_FD 0x1000 #define PHYSTS_10BASET 0x0800 #define PHYSTS_AUTONEG_DONE 0x0020 #define PHYSTS_REMOTE_FAULT 0x0010 #define PHYSTS_CAN_AUTONEG 0x0008 #define PHYSTS_LINK_UP 0x0004 #define PHYSTS_JABBER_DETECT 0x0002 #define PHYSTS_EXTENDED_REGS 0x0001 #define PHYCTL_RESET 0x8000 #define PHYCTL_SELECT_100MB 0x2000 #define PHYCTL_AUTONEG_ENABLE 0x1000 #define PHYCTL_ISOLATE 0x0400 #define PHYCTL_AUTONEG_RESTART 0x0200 #define PHYCTL_FULL_DUPLEX 0x0100 /* * Definitions for the DE425. */ #define DE425_CFID 0x08 /* Configuration Id */ #define DE425_CFCS 0x0C /* Configuration Command-Status */ #define DE425_CFRV 0x18 /* Configuration Revision */ #define DE425_CFLT 0x1C /* Configuration Latency Timer */ #define DE425_CBIO 0x28 /* Configuration Base IO Address */ #define DE425_CFDA 0x2C /* Configuration Driver Area */ #define DE425_ENETROM_OFFSET 0xC90 /* Offset in I/O space for ENETROM */ #define DE425_CFG0 0xC88 /* IRQ register */ #define DE425_EISAID 0x10a34250 /* EISA device id */ #define DE425_EISA_IOSIZE 0x100 #define DEC_VENDORID 0x1011 #define CHIPID_21040 0x0002 #define CHIPID_21140 0x0009 #define CHIPID_21041 0x0014 #define CHIPID_21142 0x0019 #define PCI_VENDORID(x) ((x) & 0xFFFF) #define PCI_CHIPID(x) (((x) >> 16) & 0xFFFF) /* * Generic SROM Format * * */ typedef struct { u_int8_t sh_idbuf[18]; u_int8_t sh_version; u_int8_t sh_adapter_count; u_int8_t sh_ieee802_address[6]; } tulip_srom_header_t; typedef struct { u_int8_t sai_device; u_int8_t sai_leaf_offset_lowbyte; u_int8_t sai_leaf_offset_highbyte; } tulip_srom_adapter_info_t; typedef enum { TULIP_SROM_CONNTYPE_10BASET =0x0000, TULIP_SROM_CONNTYPE_BNC =0x0001, TULIP_SROM_CONNTYPE_AUI =0x0002, TULIP_SROM_CONNTYPE_100BASETX =0x0003, TULIP_SROM_CONNTYPE_100BASET4 =0x0006, TULIP_SROM_CONNTYPE_100BASEFX =0x0007, TULIP_SROM_CONNTYPE_MII_10BASET =0x0009, TULIP_SROM_CONNTYPE_MII_100BASETX =0x000D, TULIP_SROM_CONNTYPE_MII_100BASET4 =0x000F, TULIP_SROM_CONNTYPE_MII_100BASEFX =0x0010, TULIP_SROM_CONNTYPE_10BASET_NWAY =0x0100, TULIP_SROM_CONNTYPE_10BASET_FD =0x0204, TULIP_SROM_CONNTYPE_MII_10BASET_FD =0x020A, TULIP_SROM_CONNTYPE_100BASETX_FD =0x020E, TULIP_SROM_CONNTYPE_MII_100BASETX_FD =0x0211, TULIP_SROM_CONNTYPE_10BASET_NOLINKPASS =0x0400, TULIP_SROM_CONNTYPE_AUTOSENSE =0x0800, TULIP_SROM_CONNTYPE_AUTOSENSE_POWERUP =0x8800, TULIP_SROM_CONNTYPE_AUTOSENSE_NWAY =0x9000, TULIP_SROM_CONNTYPE_NOT_USED =0xFFFF } tulip_srom_connection_t; typedef enum { TULIP_SROM_MEDIA_10BASET =0x0000, TULIP_SROM_MEDIA_BNC =0x0001, TULIP_SROM_MEDIA_AUI =0x0002, TULIP_SROM_MEDIA_100BASETX =0x0003, TULIP_SROM_MEDIA_10BASET_FD =0x0004, TULIP_SROM_MEDIA_100BASETX_FD =0x0005, TULIP_SROM_MEDIA_100BASET4 =0x0006, TULIP_SROM_MEDIA_100BASEFX =0x0007, TULIP_SROM_MEDIA_100BASEFX_FD =0x0008 } tulip_srom_media_t; #define TULIP_SROM_21041_EXTENDED 0x40 #define TULIP_SROM_2114X_NOINDICATOR 0x8000 #define TULIP_SROM_2114X_DEFAULT 0x4000 #define TULIP_SROM_2114X_POLARITY 0x0080 #define TULIP_SROM_2114X_CMDBITS(n) (((n) & 0x0071) << 18) #define TULIP_SROM_2114X_BITPOS(b) (1 << (((b) & 0x0E) >> 1)) #endif /* !defined(_DC21040_H) */