Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/mwl/@/dev/wl/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/mwl/@/dev/wl/if_wl.h |
/*- * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain all copyright * notices, this list of conditions and the following disclaimer. * 2. The names of the authors may not be used to endorse or promote products * derived from this software without specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD: release/9.1.0/sys/dev/wl/if_wl.h 139749 2005-01-06 01:43:34Z imp $ */ /* Definitions for WaveLAN driver */ #ifndef _IF_WL_H #define _IF_WL_H #define STATUS_TRIES 15000 #define N_FD 100 #define N_RBD 100 #define N_TBD 72 #define RCVBUFSIZE 540 #define I82586NULL 0xffff #define DSF_RUNNING 1 #define MOD_ENAL 1 #define MOD_PROM 2 typedef struct { rbd_t r; char rbd_pad[2]; char rbuffer[RCVBUFSIZE]; } ru_t; /* Board 64k RAM layout. Offsets from 0x0000 */ #define OFFSET_RU 0x0000 /* 0x64 * fd_t = 0x898 */ #define OFFSET_RBD 0x0900 /* 0x64 * ru_t = 0xd7a0 */ #define OFFSET_CU 0xe0a0 /* 0x100 */ #define OFFSET_TBD 0xe1a0 /* 0x48 * tbd_t = 0x240 */ #define OFFSET_TBUF 0xe3e0 /* 0x1bfe */ #define OFFSET_SCB 0xffde /* 0x1 * scb_t = 0x10 */ #define OFFSET_ISCP 0xffee /* 0x1 * iscp_t = 0x8 */ #define OFFSET_SCP 0xfff6 /* 0x1 * scp_t = 0xa */ /* WaveLAN host interface definitions */ #define HACR(base) (base) /* Host Adapter Command Register */ #define HASR(base) (base) /* Host Adapter Status Register */ #define MMCR(base) (base+0x2) /* Modem Management Ctrl Register */ #define PIOR0(base) (base+0x4) /* Program I/O Address Register 0 */ #define PIOP0(base) (base+0x6) /* Program I/O Port 0 */ #define PIOR1(base) (base+0x8) /* Program I/O Address Register 1 */ #define PIOP1(base) (base+0xa) /* Program I/O Port 1 */ #define PIOR2(base) (base+0xc) /* Program I/O Address Register 2 */ #define PIOP2(base) (base+0xe) /* Program I/O Port 2 */ /* Program I/O Mode Register values */ #define STATIC_PIO 0 /* Mode 1: static mode */ #define AUTOINCR_PIO 1 /* Mode 2: auto increment mode */ #define AUTODECR_PIO 2 /* Mode 3: auto decrement mode */ #define PARAM_ACCESS_PIO 3 /* Mode 4: LAN parameter access mode */ #define PIO_MASK 3 /* register mask */ #define PIOM(cmd,piono) ((u_short)cmd << 10 << (piono * 2)) /* Host Adapter status register definitions */ #define HASR_INTR 0x0001 /* Interrupt request from 82586 */ #define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */ #define HASR_MMC_BUSY 0x0004 /* MMC busy indication */ #define HASR_PARA_BUSY 0x0008 /* LAN parameter storage area busy */ /* Host Adapter command register definitions */ #define HACR_RESET 0x0001 /* Reset board */ #define HACR_CA 0x0002 /* Set Channel Attention for 82586 */ #define HACR_16BITS 0x0004 /* 1==16 bits operation, 0==8 bits */ #define HACR_OUT1 0x0008 /* General purpose output pin */ #define HACR_OUT2 0x0010 /* General purpose output pin */ #define HACR_MASK_82586 0x0020 /* Mask 82586 interrupts, 1==unmask */ #define HACR_MASK_MMC 0x0040 /* Mask MMC interrupts, 1==unmask */ #define HACR_INTR_CLEN 0x0080 /* interrupt status clear enable */ #define HACR_DEFAULT (HACR_OUT1 | HACR_OUT2 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2)) #define HACR_INTRON (HACR_MASK_82586 | HACR_MASK_MMC | HACR_INTR_CLEN) #define CMD(sc) \ { \ outw(HACR(sc->base),sc->hacr); \ /* delay for 50 us, might only be needed sometimes */ \ DELAY(DELAYCONST); \ } /* macro for setting the channel attention bit. No delays here since * it is used in critical sections */ #define SET_CHAN_ATTN(sc) \ { \ outw(HACR(sc->base),sc->hacr | HACR_CA); \ } #define MMC_WRITE(cmd,val) \ while(inw(HASR(sc->base)) & HASR_MMC_BUSY) ; \ outw(MMCR(sc->base), \ (u_short)(((u_short)(val) << 8) | ((cmd) << 1) | 1)) #endif /* _IF_WL_H */