Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/pipe/@/dev/fdt/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/netgraph/pipe/@/dev/fdt/fdt_powerpc.c |
/*- * Copyright (c) 2009-2010 The FreeBSD Foundation * All rights reserved. * * This software was developed by Semihalf under sponsorship from * the FreeBSD Foundation. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include <sys/cdefs.h> __FBSDID("$FreeBSD: release/9.1.0/sys/dev/fdt/fdt_powerpc.c 209906 2010-07-11 20:49:36Z raj $"); #include <sys/param.h> #include <sys/systm.h> #include <sys/kernel.h> #include <sys/module.h> #include <sys/bus.h> #include <machine/intr_machdep.h> #include <dev/ofw/ofw_bus.h> #include <dev/ofw/ofw_bus_subr.h> #include <dev/ofw/openfirm.h> #include "ofw_bus_if.h" #include "fdt_common.h" static void fdt_fixup_busfreq(phandle_t root) { phandle_t sb, cpus, child; pcell_t freq; /* * Do a strict check so as to skip non-SOC nodes, which also claim * simple-bus compatibility such as eLBC etc. */ if ((sb = fdt_find_compatible(root, "simple-bus", 1)) == 0) return; /* * This fixup uses /cpus/ bus-frequency prop value to set simple-bus * bus-frequency property. */ if ((cpus = OF_finddevice("/cpus")) == 0) return; if ((child = OF_child(cpus)) == 0) return; if (OF_getprop(child, "bus-frequency", (void *)&freq, sizeof(freq)) <= 0) return; OF_setprop(sb, "bus-frequency", (void *)&freq, sizeof(freq)); } struct fdt_fixup_entry fdt_fixup_table[] = { { "fsl,MPC8572DS", &fdt_fixup_busfreq }, { "MPC8555CDS", &fdt_fixup_busfreq }, { NULL, NULL } }; static int fdt_pic_decode_iic(phandle_t node, pcell_t *intr, int *interrupt, int *trig, int *pol) { if (!fdt_is_compatible(node, "chrp,iic")) return (ENXIO); *interrupt = intr[0]; switch (intr[1]) { case 0: /* Active L level */ *trig = INTR_TRIGGER_LEVEL; *pol = INTR_POLARITY_LOW; break; case 1: /* Active H level */ *trig = INTR_TRIGGER_LEVEL; *pol = INTR_POLARITY_HIGH; break; case 2: /* H to L edge */ *trig = INTR_TRIGGER_EDGE; *pol = INTR_POLARITY_LOW; break; case 3: /* L to H edge */ *trig = INTR_TRIGGER_EDGE; *pol = INTR_POLARITY_HIGH; break; default: *trig = INTR_TRIGGER_CONFORM; *pol = INTR_POLARITY_CONFORM; } return (0); } static int fdt_pic_decode_openpic(phandle_t node, pcell_t *intr, int *interrupt, int *trig, int *pol) { if (!fdt_is_compatible(node, "chrp,open-pic")) return (ENXIO); /* * XXX The interrupt number read out from the MPC85XX device tree is * already offset by 16 to reflect the 'internal' IRQ range shift on * the OpenPIC. */ *interrupt = intr[0]; switch (intr[1]) { case 0: /* L to H edge */ *trig = INTR_TRIGGER_EDGE; *pol = INTR_POLARITY_HIGH; break; case 1: /* Active L level */ *trig = INTR_TRIGGER_LEVEL; *pol = INTR_POLARITY_LOW; break; case 2: /* Active H level */ *trig = INTR_TRIGGER_LEVEL; *pol = INTR_POLARITY_HIGH; break; case 3: /* H to L edge */ *trig = INTR_TRIGGER_EDGE; *pol = INTR_POLARITY_LOW; break; default: *trig = INTR_TRIGGER_CONFORM; *pol = INTR_POLARITY_CONFORM; } return (0); } fdt_pic_decode_t fdt_pic_table[] = { &fdt_pic_decode_iic, &fdt_pic_decode_openpic, NULL };