config root man

/***********************license start***************
 * Copyright (c) 2003-2010  Cavium Networks (support@cavium.com). All rights
 * reserved.
 *
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.

 *   * Neither the name of Cavium Networks nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.

 * This Software, including technical data, may be subject to U.S. export  control
 * laws, including the U.S. Export Administration Act and its  associated
 * regulations, and may be subject to export or import  regulations in other
 * countries.

 * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
 * AND WITH ALL FAULTS AND CAVIUM  NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR
 * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
 * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
 * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
 * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
 * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
 * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
 * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE  RISK ARISING OUT OF USE OR
 * PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
 ***********************license end**************************************/


/**
 * @file
 *
 * This module provides system/board information obtained by the bootloader.
 *
 * <hr>$Revision: 49448 $<hr>
 *
 */


#ifndef __CVMX_SYSINFO_H__
#define __CVMX_SYSINFO_H__

#ifndef CVMX_BUILD_FOR_LINUX_KERNEL
#include "cvmx-app-init.h"
#endif

#ifdef	__cplusplus
extern "C" {
#endif

#define OCTEON_SERIAL_LEN 20
/**
 * Structure describing application specific information.
 * __cvmx_app_init() populates this from the cvmx boot descriptor.
 * This structure is private to simple executive applications, so no
 * versioning is required.
 *
 * This structure must be provided with some fields set in order to
 * use simple executive functions in other applications (Linux kernel,
 * u-boot, etc.)  The cvmx_sysinfo_minimal_initialize() function is
 * provided to set the required values in these cases.
 *
 */
struct cvmx_sysinfo {
	/* System wide variables */
	uint64_t system_dram_size;  /**< installed DRAM in system, in bytes */
	uint64_t phy_mem_desc_addr;  /**< Address of the memory descriptor block */

	/* Application image specific variables */
	uint64_t stack_top;  /**< stack top address (virtual) */
	uint64_t heap_base;  /**< heap base address (virtual) */
	uint32_t stack_size; /**< stack size in bytes */
	uint32_t heap_size;  /**< heap size in bytes */
	uint32_t core_mask;  /**< coremask defining cores running application */
	uint32_t init_core;  /**< Deprecated, use cvmx_coremask_first_core() to select init core */
	uint64_t exception_base_addr;  /**< exception base address, as set by bootloader */
	uint32_t cpu_clock_hz;     /**< cpu clock speed in hz */
	uint32_t dram_data_rate_hz;  /**< dram data rate in hz (data rate = 2 * clock rate */

	uint16_t board_type;
	uint8_t  board_rev_major;
	uint8_t  board_rev_minor;
	uint8_t  mac_addr_base[6];
	uint8_t  mac_addr_count;
	char     board_serial_number[OCTEON_SERIAL_LEN];
	/*
	 * Several boards support compact flash on the Octeon boot
	 * bus.  The CF memory spaces may be mapped to different
	 * addresses on different boards.  These values will be 0 if
	 * CF is not present.  Note that these addresses are physical
	 * addresses, and it is up to the application to use the
	 * proper addressing mode (XKPHYS, KSEG0, etc.)
	 */
	uint64_t compact_flash_common_base_addr;
	uint64_t compact_flash_attribute_base_addr;
	/*
	 * Base address of the LED display (as on EBT3000 board) This
	 * will be 0 if LED display not present.  Note that this
	 * address is a physical address, and it is up to the
	 * application to use the proper addressing mode (XKPHYS,
	 * KSEG0, etc.)
	 */
	uint64_t led_display_base_addr;
	uint32_t dfa_ref_clock_hz;  /**< DFA reference clock in hz (if applicable)*/
	uint32_t bootloader_config_flags;  /**< configuration flags from bootloader */
	uint8_t  console_uart_num;         /** < Uart number used for console */
};

#ifndef CVMX_BUILD_FOR_LINUX_KERNEL
typedef struct cvmx_sysinfo cvmx_sysinfo_t;
#endif

/**
 * This function returns the system/board information as obtained
 * by the bootloader.
 *
 *
 * @return  Pointer to the boot information structure
 *
 */

extern struct cvmx_sysinfo *cvmx_sysinfo_get(void);

#ifndef CVMX_BUILD_FOR_LINUX_KERNEL
/**
 * This function is used in non-simple executive environments (such as Linux kernel, u-boot, etc.)
 * to configure the minimal fields that are required to use
 * simple executive files directly.
 *
 * Locking (if required) must be handled outside of this
 * function
 *
 * @param phy_mem_desc_addr
 *                   Address of the global physical memory descriptor (bootmem
 *                   descriptor)
 * @param board_type Octeon board type enumeration
 *
 * @param board_rev_major
 *                   Board major revision
 * @param board_rev_minor
 *                   Board minor revision
 * @param cpu_clock_hz
 *                   CPU clock freqency in hertz
 *
 * @return 0: Failure
 *         1: success
 */
extern int cvmx_sysinfo_minimal_initialize(uint64_t phy_mem_desc_addr, uint16_t board_type, uint8_t board_rev_major,
                                    uint8_t board_rev_minor, uint32_t cpu_clock_hz);
#endif

#ifdef CVMX_BUILD_FOR_LINUX_USER
/**
 * Initialize the sysinfo structure when running on
 * Octeon under Linux userspace
 */
extern void cvmx_sysinfo_linux_userspace_initialize(void);
#endif

#ifdef	__cplusplus
}
#endif

#endif /* __CVMX_SYSINFO_H__ */