| Current Path : /sys/amd64/compile/hs32/modules/usr/src/sys/modules/patm/@/dev/ath/ath_hal/ar5312/ |
FreeBSD hs32.drive.ne.jp 9.1-RELEASE FreeBSD 9.1-RELEASE #1: Wed Jan 14 12:18:08 JST 2015 root@hs32.drive.ne.jp:/sys/amd64/compile/hs32 amd64 |
| Current File : //sys/amd64/compile/hs32/modules/usr/src/sys/modules/patm/@/dev/ath/ath_hal/ar5312/ar5312_reset.c |
/*
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2002-2008 Atheros Communications, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD: release/9.1.0/sys/dev/ath/ath_hal/ar5312/ar5312_reset.c 187831 2009-01-28 18:00:22Z sam $
*/
#include "opt_ah.h"
#ifdef AH_SUPPORT_AR5312
#include "ah.h"
#include "ah_internal.h"
#include "ah_devid.h"
#include "ar5312/ar5312.h"
#include "ar5312/ar5312reg.h"
#include "ar5312/ar5312phy.h"
#include "ah_eeprom_v3.h"
/* Additional Time delay to wait after activiting the Base band */
#define BASE_ACTIVATE_DELAY 100 /* 100 usec */
#define PLL_SETTLE_DELAY 300 /* 300 usec */
extern int16_t ar5212GetNf(struct ath_hal *, const struct ieee80211_channel *);
extern void ar5212SetRateDurationTable(struct ath_hal *,
const struct ieee80211_channel *);
extern HAL_BOOL ar5212SetTransmitPower(struct ath_hal *ah,
const struct ieee80211_channel *chan, uint16_t *rfXpdGain);
extern void ar5212SetDeltaSlope(struct ath_hal *,
const struct ieee80211_channel *);
extern HAL_BOOL ar5212SetBoardValues(struct ath_hal *,
const struct ieee80211_channel *);
extern void ar5212SetIFSTiming(struct ath_hal *,
const struct ieee80211_channel *);
extern HAL_BOOL ar5212IsSpurChannel(struct ath_hal *,
const struct ieee80211_channel *);
extern HAL_BOOL ar5212ChannelChange(struct ath_hal *,
const struct ieee80211_channel *);
static HAL_BOOL ar5312SetResetReg(struct ath_hal *, uint32_t resetMask);
static int
write_common(struct ath_hal *ah, const HAL_INI_ARRAY *ia,
HAL_BOOL bChannelChange, int writes)
{
#define IS_NO_RESET_TIMER_ADDR(x) \
( (((x) >= AR_BEACON) && ((x) <= AR_CFP_DUR)) || \
(((x) >= AR_SLEEP1) && ((x) <= AR_SLEEP3)))
#define V(r, c) (ia)->data[((r)*(ia)->cols) + (c)]
int i;
/* Write Common Array Parameters */
for (i = 0; i < ia->rows; i++) {
uint32_t reg = V(i, 0);
/* XXX timer/beacon setup registers? */
/* On channel change, don't reset the PCU registers */
if (!(bChannelChange && IS_NO_RESET_TIMER_ADDR(reg))) {
OS_REG_WRITE(ah, reg, V(i, 1));
DMA_YIELD(writes);
}
}
return writes;
#undef IS_NO_RESET_TIMER_ADDR
#undef V
}
/*
* Places the device in and out of reset and then places sane
* values in the registers based on EEPROM config, initialization
* vectors (as determined by the mode), and station configuration
*
* bChannelChange is used to preserve DMA/PCU registers across
* a HW Reset during channel change.
*/
HAL_BOOL
ar5312Reset(struct ath_hal *ah, HAL_OPMODE opmode,
struct ieee80211_channel *chan,
HAL_BOOL bChannelChange, HAL_STATUS *status)
{
#define N(a) (sizeof (a) / sizeof (a[0]))
#define FAIL(_code) do { ecode = _code; goto bad; } while (0)
struct ath_hal_5212 *ahp = AH5212(ah);
HAL_CHANNEL_INTERNAL *ichan;
const HAL_EEPROM *ee;
uint32_t saveFrameSeqCount, saveDefAntenna;
uint32_t macStaId1, synthDelay, txFrm2TxDStart;
uint16_t rfXpdGain[MAX_NUM_PDGAINS_PER_CHANNEL];
int16_t cckOfdmPwrDelta = 0;
u_int modesIndex, freqIndex;
HAL_STATUS ecode;
int i, regWrites = 0;
uint32_t testReg;
uint32_t saveLedState = 0;
HALASSERT(ah->ah_magic == AR5212_MAGIC);
ee = AH_PRIVATE(ah)->ah_eeprom;
OS_MARK(ah, AH_MARK_RESET, bChannelChange);
/*
* Map public channel to private.
*/
ichan = ath_hal_checkchannel(ah, chan);
if (ichan == AH_NULL) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: invalid channel %u/0x%x; no mapping\n",
__func__, chan->ic_freq, chan->ic_flags);
FAIL(HAL_EINVAL);
}
switch (opmode) {
case HAL_M_STA:
case HAL_M_IBSS:
case HAL_M_HOSTAP:
case HAL_M_MONITOR:
break;
default:
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: invalid operating mode %u\n",
__func__, opmode);
FAIL(HAL_EINVAL);
break;
}
HALASSERT(ahp->ah_eeversion >= AR_EEPROM_VER3);
/* Preserve certain DMA hardware registers on a channel change */
if (bChannelChange) {
/*
* On Venice, the TSF is almost preserved across a reset;
* it requires the doubling writes to the RESET_TSF
* bit in the AR_BEACON register; it also has the quirk
* of the TSF going back in time on the station (station
* latches onto the last beacon's tsf during a reset 50%
* of the times); the latter is not a problem for adhoc
* stations since as long as the TSF is behind, it will
* get resynchronized on receiving the next beacon; the
* TSF going backwards in time could be a problem for the
* sleep operation (supported on infrastructure stations
* only) - the best and most general fix for this situation
* is to resynchronize the various sleep/beacon timers on
* the receipt of the next beacon i.e. when the TSF itself
* gets resynchronized to the AP's TSF - power save is
* needed to be temporarily disabled until that time
*
* Need to save the sequence number to restore it after
* the reset!
*/
saveFrameSeqCount = OS_REG_READ(ah, AR_D_SEQNUM);
} else
saveFrameSeqCount = 0; /* NB: silence compiler */
/* If the channel change is across the same mode - perform a fast channel change */
if ((IS_2413(ah) || IS_5413(ah))) {
/*
* Channel change can only be used when:
* -channel change requested - so it's not the initial reset.
* -it's not a change to the current channel - often called when switching modes
* on a channel
* -the modes of the previous and requested channel are the same - some ugly code for XR
*/
if (bChannelChange &&
AH_PRIVATE(ah)->ah_curchan != AH_NULL &&
(chan->ic_freq != AH_PRIVATE(ah)->ah_curchan->ic_freq) &&
((chan->ic_flags & IEEE80211_CHAN_ALLTURBO) ==
(AH_PRIVATE(ah)->ah_curchan->ic_flags & IEEE80211_CHAN_ALLTURBO))) {
if (ar5212ChannelChange(ah, chan))
/* If ChannelChange completed - skip the rest of reset */
return AH_TRUE;
}
}
/*
* Preserve the antenna on a channel change
*/
saveDefAntenna = OS_REG_READ(ah, AR_DEF_ANTENNA);
if (saveDefAntenna == 0) /* XXX magic constants */
saveDefAntenna = 1;
/* Save hardware flag before chip reset clears the register */
macStaId1 = OS_REG_READ(ah, AR_STA_ID1) &
(AR_STA_ID1_BASE_RATE_11B | AR_STA_ID1_USE_DEFANT);
/* Save led state from pci config register */
if (!IS_5315(ah))
saveLedState = OS_REG_READ(ah, AR5312_PCICFG) &
(AR_PCICFG_LEDCTL | AR_PCICFG_LEDMODE | AR_PCICFG_LEDBLINK |
AR_PCICFG_LEDSLOW);
ar5312RestoreClock(ah, opmode); /* move to refclk operation */
/*
* Adjust gain parameters before reset if
* there's an outstanding gain updated.
*/
(void) ar5212GetRfgain(ah);
if (!ar5312ChipReset(ah, chan)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: chip reset failed\n", __func__);
FAIL(HAL_EIO);
}
/* Setup the indices for the next set of register array writes */
if (IEEE80211_IS_CHAN_2GHZ(chan)) {
freqIndex = 2;
modesIndex = IEEE80211_IS_CHAN_108G(chan) ? 5 :
IEEE80211_IS_CHAN_G(chan) ? 4 : 3;
} else {
freqIndex = 1;
modesIndex = IEEE80211_IS_CHAN_ST(chan) ? 2 : 1;
}
OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);
/* Set correct Baseband to analog shift setting to access analog chips. */
OS_REG_WRITE(ah, AR_PHY(0), 0x00000007);
regWrites = ath_hal_ini_write(ah, &ahp->ah_ini_modes, modesIndex, 0);
regWrites = write_common(ah, &ahp->ah_ini_common, bChannelChange,
regWrites);
ahp->ah_rfHal->writeRegs(ah, modesIndex, freqIndex, regWrites);
OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);
if (IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan))
ar5212SetIFSTiming(ah, chan);
/* Overwrite INI values for revised chipsets */
if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_2) {
/* ADC_CTL */
OS_REG_WRITE(ah, AR_PHY_ADC_CTL,
SM(2, AR_PHY_ADC_CTL_OFF_INBUFGAIN) |
SM(2, AR_PHY_ADC_CTL_ON_INBUFGAIN) |
AR_PHY_ADC_CTL_OFF_PWDDAC |
AR_PHY_ADC_CTL_OFF_PWDADC);
/* TX_PWR_ADJ */
if (chan->channel == 2484) {
cckOfdmPwrDelta = SCALE_OC_DELTA(ee->ee_cckOfdmPwrDelta - ee->ee_scaledCh14FilterCckDelta);
} else {
cckOfdmPwrDelta = SCALE_OC_DELTA(ee->ee_cckOfdmPwrDelta);
}
if (IEEE80211_IS_CHAN_G(chan)) {
OS_REG_WRITE(ah, AR_PHY_TXPWRADJ,
SM((ee->ee_cckOfdmPwrDelta*-1), AR_PHY_TXPWRADJ_CCK_GAIN_DELTA) |
SM((cckOfdmPwrDelta*-1), AR_PHY_TXPWRADJ_CCK_PCDAC_INDEX));
} else {
OS_REG_WRITE(ah, AR_PHY_TXPWRADJ, 0);
}
/* Add barker RSSI thresh enable as disabled */
OS_REG_CLR_BIT(ah, AR_PHY_DAG_CTRLCCK,
AR_PHY_DAG_CTRLCCK_EN_RSSI_THR);
OS_REG_RMW_FIELD(ah, AR_PHY_DAG_CTRLCCK,
AR_PHY_DAG_CTRLCCK_RSSI_THR, 2);
/* Set the mute mask to the correct default */
OS_REG_WRITE(ah, AR_SEQ_MASK, 0x0000000F);
}
if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_3) {
/* Clear reg to alllow RX_CLEAR line debug */
OS_REG_WRITE(ah, AR_PHY_BLUETOOTH, 0);
}
if (AH_PRIVATE(ah)->ah_phyRev >= AR_PHY_CHIP_ID_REV_4) {
#ifdef notyet
/* Enable burst prefetch for the data queues */
OS_REG_RMW_FIELD(ah, AR_D_FPCTL, ... );
/* Enable double-buffering */
OS_REG_CLR_BIT(ah, AR_TXCFG, AR_TXCFG_DBL_BUF_DIS);
#endif
}
if (IS_5312_2_X(ah)) {
/* ADC_CTRL */
OS_REG_WRITE(ah, AR_PHY_SIGMA_DELTA,
SM(2, AR_PHY_SIGMA_DELTA_ADC_SEL) |
SM(4, AR_PHY_SIGMA_DELTA_FILT2) |
SM(0x16, AR_PHY_SIGMA_DELTA_FILT1) |
SM(0, AR_PHY_SIGMA_DELTA_ADC_CLIP));
if (IEEE80211_IS_CHAN_2GHZ(chan))
OS_REG_RMW_FIELD(ah, AR_PHY_RXGAIN, AR_PHY_RXGAIN_TXRX_RF_MAX, 0x0F);
/* CCK Short parameter adjustment in 11B mode */
if (IEEE80211_IS_CHAN_B(chan))
OS_REG_RMW_FIELD(ah, AR_PHY_CCK_RXCTRL4, AR_PHY_CCK_RXCTRL4_FREQ_EST_SHORT, 12);
/* Set ADC/DAC select values */
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x04);
/* Increase 11A AGC Settling */
if (IEEE80211_IS_CHAN_A(chan))
OS_REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_AGC, 32);
} else {
/* Set ADC/DAC select values */
OS_REG_WRITE(ah, AR_PHY_SLEEP_SCAL, 0x0e);
}
/* Setup the transmit power values. */
if (!ar5212SetTransmitPower(ah, chan, rfXpdGain)) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: error init'ing transmit power\n", __func__);
FAIL(HAL_EIO);
}
/* Write the analog registers */
if (!ahp->ah_rfHal->setRfRegs(ah, chan, modesIndex, rfXpdGain)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5212SetRfRegs failed\n",
__func__);
FAIL(HAL_EIO);
}
/* Write delta slope for OFDM enabled modes (A, G, Turbo) */
if (IEEE80211_IS_CHAN_OFDM(chan)) {
if (IS_5413(ah) ||
AH_PRIVATE(ah)->ah_eeversion >= AR_EEPROM_VER5_3)
ar5212SetSpurMitigation(ah, chan);
ar5212SetDeltaSlope(ah, chan);
}
/* Setup board specific options for EEPROM version 3 */
if (!ar5212SetBoardValues(ah, chan)) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: error setting board options\n", __func__);
FAIL(HAL_EIO);
}
/* Restore certain DMA hardware registers on a channel change */
if (bChannelChange)
OS_REG_WRITE(ah, AR_D_SEQNUM, saveFrameSeqCount);
OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);
OS_REG_WRITE(ah, AR_STA_ID0, LE_READ_4(ahp->ah_macaddr));
OS_REG_WRITE(ah, AR_STA_ID1, LE_READ_2(ahp->ah_macaddr + 4)
| macStaId1
| AR_STA_ID1_RTS_USE_DEF
| ahp->ah_staId1Defaults
);
ar5212SetOperatingMode(ah, opmode);
/* Set Venice BSSID mask according to current state */
OS_REG_WRITE(ah, AR_BSSMSKL, LE_READ_4(ahp->ah_bssidmask));
OS_REG_WRITE(ah, AR_BSSMSKU, LE_READ_2(ahp->ah_bssidmask + 4));
/* Restore previous led state */
if (!IS_5315(ah))
OS_REG_WRITE(ah, AR5312_PCICFG, OS_REG_READ(ah, AR_PCICFG) | saveLedState);
/* Restore previous antenna */
OS_REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
/* then our BSSID */
OS_REG_WRITE(ah, AR_BSS_ID0, LE_READ_4(ahp->ah_bssid));
OS_REG_WRITE(ah, AR_BSS_ID1, LE_READ_2(ahp->ah_bssid + 4));
/* Restore bmiss rssi & count thresholds */
OS_REG_WRITE(ah, AR_RSSI_THR, ahp->ah_rssiThr);
OS_REG_WRITE(ah, AR_ISR, ~0); /* cleared on write */
if (!ar5212SetChannel(ah, chan))
FAIL(HAL_EIO);
OS_MARK(ah, AH_MARK_RESET_LINE, __LINE__);
ar5212SetCoverageClass(ah, AH_PRIVATE(ah)->ah_coverageClass, 1);
ar5212SetRateDurationTable(ah, chan);
/* Set Tx frame start to tx data start delay */
if (IS_RAD5112_ANY(ah) &&
(IEEE80211_IS_CHAN_HALF(chan) || IEEE80211_IS_CHAN_QUARTER(chan))) {
txFrm2TxDStart =
IEEE80211_IS_CHAN_HALF(chan) ?
TX_FRAME_D_START_HALF_RATE:
TX_FRAME_D_START_QUARTER_RATE;
OS_REG_RMW_FIELD(ah, AR_PHY_TX_CTL,
AR_PHY_TX_FRAME_TO_TX_DATA_START, txFrm2TxDStart);
}
/*
* Setup fast diversity.
* Fast diversity can be enabled or disabled via regadd.txt.
* Default is enabled.
* For reference,
* Disable: reg val
* 0x00009860 0x00009d18 (if 11a / 11g, else no change)
* 0x00009970 0x192bb514
* 0x0000a208 0xd03e4648
*
* Enable: 0x00009860 0x00009d10 (if 11a / 11g, else no change)
* 0x00009970 0x192fb514
* 0x0000a208 0xd03e6788
*/
/* XXX Setup pre PHY ENABLE EAR additions */
/* flush SCAL reg */
if (IS_5312_2_X(ah)) {
(void) OS_REG_READ(ah, AR_PHY_SLEEP_SCAL);
}
/*
* Wait for the frequency synth to settle (synth goes on
* via AR_PHY_ACTIVE_EN). Read the phy active delay register.
* Value is in 100ns increments.
*/
synthDelay = OS_REG_READ(ah, AR_PHY_RX_DELAY) & AR_PHY_RX_DELAY_DELAY;
if (IEEE80211_IS_CHAN_B(chan)) {
synthDelay = (4 * synthDelay) / 22;
} else {
synthDelay /= 10;
}
/* Activate the PHY (includes baseband activate and synthesizer on) */
OS_REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
/*
* There is an issue if the AP starts the calibration before
* the base band timeout completes. This could result in the
* rx_clear false triggering. As a workaround we add delay an
* extra BASE_ACTIVATE_DELAY usecs to ensure this condition
* does not happen.
*/
if (IEEE80211_IS_CHAN_HALF(chan)) {
OS_DELAY((synthDelay << 1) + BASE_ACTIVATE_DELAY);
} else if (IEEE80211_IS_CHAN_QUARTER(chan)) {
OS_DELAY((synthDelay << 2) + BASE_ACTIVATE_DELAY);
} else {
OS_DELAY(synthDelay + BASE_ACTIVATE_DELAY);
}
/*
* The udelay method is not reliable with notebooks.
* Need to check to see if the baseband is ready
*/
testReg = OS_REG_READ(ah, AR_PHY_TESTCTRL);
/* Selects the Tx hold */
OS_REG_WRITE(ah, AR_PHY_TESTCTRL, AR_PHY_TESTCTRL_TXHOLD);
i = 0;
while ((i++ < 20) &&
(OS_REG_READ(ah, 0x9c24) & 0x10)) /* test if baseband not ready */ OS_DELAY(200);
OS_REG_WRITE(ah, AR_PHY_TESTCTRL, testReg);
/* Calibrate the AGC and start a NF calculation */
OS_REG_WRITE(ah, AR_PHY_AGC_CONTROL,
OS_REG_READ(ah, AR_PHY_AGC_CONTROL)
| AR_PHY_AGC_CONTROL_CAL
| AR_PHY_AGC_CONTROL_NF);
if (!IEEE80211_IS_CHAN_B(chan) && ahp->ah_bIQCalibration != IQ_CAL_DONE) {
/* Start IQ calibration w/ 2^(INIT_IQCAL_LOG_COUNT_MAX+1) samples */
OS_REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4,
AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
INIT_IQCAL_LOG_COUNT_MAX);
OS_REG_SET_BIT(ah, AR_PHY_TIMING_CTRL4,
AR_PHY_TIMING_CTRL4_DO_IQCAL);
ahp->ah_bIQCalibration = IQ_CAL_RUNNING;
} else
ahp->ah_bIQCalibration = IQ_CAL_INACTIVE;
/* Setup compression registers */
ar5212SetCompRegs(ah);
/* Set 1:1 QCU to DCU mapping for all queues */
for (i = 0; i < AR_NUM_DCU; i++)
OS_REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
ahp->ah_intrTxqs = 0;
for (i = 0; i < AH_PRIVATE(ah)->ah_caps.halTotalQueues; i++)
ar5212ResetTxQueue(ah, i);
/*
* Setup interrupt handling. Note that ar5212ResetTxQueue
* manipulates the secondary IMR's as queues are enabled
* and disabled. This is done with RMW ops to insure the
* settings we make here are preserved.
*/
ahp->ah_maskReg = AR_IMR_TXOK | AR_IMR_TXERR | AR_IMR_TXURN
| AR_IMR_RXOK | AR_IMR_RXERR | AR_IMR_RXORN
| AR_IMR_HIUERR
;
if (opmode == HAL_M_HOSTAP)
ahp->ah_maskReg |= AR_IMR_MIB;
OS_REG_WRITE(ah, AR_IMR, ahp->ah_maskReg);
/* Enable bus errors that are OR'd to set the HIUERR bit */
OS_REG_WRITE(ah, AR_IMR_S2,
OS_REG_READ(ah, AR_IMR_S2)
| AR_IMR_S2_MCABT | AR_IMR_S2_SSERR | AR_IMR_S2_DPERR);
if (AH_PRIVATE(ah)->ah_rfkillEnabled)
ar5212EnableRfKill(ah);
if (!ath_hal_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0)) {
HALDEBUG(ah, HAL_DEBUG_ANY,
"%s: offset calibration failed to complete in 1ms;"
" noisy environment?\n", __func__);
}
/*
* Set clocks back to 32kHz if they had been using refClk, then
* use an external 32kHz crystal when sleeping, if one exists.
*/
ar5312SetupClock(ah, opmode);
/*
* Writing to AR_BEACON will start timers. Hence it should
* be the last register to be written. Do not reset tsf, do
* not enable beacons at this point, but preserve other values
* like beaconInterval.
*/
OS_REG_WRITE(ah, AR_BEACON,
(OS_REG_READ(ah, AR_BEACON) &~ (AR_BEACON_EN | AR_BEACON_RESET_TSF)));
/* XXX Setup post reset EAR additions */
/* QoS support */
if (AH_PRIVATE(ah)->ah_macVersion > AR_SREV_VERSION_VENICE ||
(AH_PRIVATE(ah)->ah_macVersion == AR_SREV_VERSION_VENICE &&
AH_PRIVATE(ah)->ah_macRev >= AR_SREV_GRIFFIN_LITE)) {
OS_REG_WRITE(ah, AR_QOS_CONTROL, 0x100aa); /* XXX magic */
OS_REG_WRITE(ah, AR_QOS_SELECT, 0x3210); /* XXX magic */
}
/* Turn on NOACK Support for QoS packets */
OS_REG_WRITE(ah, AR_NOACK,
SM(2, AR_NOACK_2BIT_VALUE) |
SM(5, AR_NOACK_BIT_OFFSET) |
SM(0, AR_NOACK_BYTE_OFFSET));
/* Restore user-specified settings */
if (ahp->ah_miscMode != 0)
OS_REG_WRITE(ah, AR_MISC_MODE, ahp->ah_miscMode);
if (ahp->ah_slottime != (u_int) -1)
ar5212SetSlotTime(ah, ahp->ah_slottime);
if (ahp->ah_acktimeout != (u_int) -1)
ar5212SetAckTimeout(ah, ahp->ah_acktimeout);
if (ahp->ah_ctstimeout != (u_int) -1)
ar5212SetCTSTimeout(ah, ahp->ah_ctstimeout);
if (ahp->ah_sifstime != (u_int) -1)
ar5212SetSifsTime(ah, ahp->ah_sifstime);
if (AH_PRIVATE(ah)->ah_diagreg != 0)
OS_REG_WRITE(ah, AR_DIAG_SW, AH_PRIVATE(ah)->ah_diagreg);
AH_PRIVATE(ah)->ah_opmode = opmode; /* record operating mode */
if (bChannelChange && !IEEE80211_IS_CHAN_DFS(chan))
chan->ic_state &= ~IEEE80211_CHANSTATE_CWINT;
HALDEBUG(ah, HAL_DEBUG_RESET, "%s: done\n", __func__);
OS_MARK(ah, AH_MARK_RESET_DONE, 0);
return AH_TRUE;
bad:
OS_MARK(ah, AH_MARK_RESET_DONE, ecode);
if (status != AH_NULL)
*status = ecode;
return AH_FALSE;
#undef FAIL
#undef N
}
/*
* Places the PHY and Radio chips into reset. A full reset
* must be called to leave this state. The PCI/MAC/PCU are
* not placed into reset as we must receive interrupt to
* re-enable the hardware.
*/
HAL_BOOL
ar5312PhyDisable(struct ath_hal *ah)
{
return ar5312SetResetReg(ah, AR_RC_BB);
}
/*
* Places all of hardware into reset
*/
HAL_BOOL
ar5312Disable(struct ath_hal *ah)
{
if (!ar5312SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE))
return AH_FALSE;
/*
* Reset the HW - PCI must be reset after the rest of the
* device has been reset.
*/
return ar5312SetResetReg(ah, AR_RC_MAC | AR_RC_BB);
}
/*
* Places the hardware into reset and then pulls it out of reset
*
* TODO: Only write the PLL if we're changing to or from CCK mode
*
* WARNING: The order of the PLL and mode registers must be correct.
*/
HAL_BOOL
ar5312ChipReset(struct ath_hal *ah, const struct ieee80211_channel *chan)
{
OS_MARK(ah, AH_MARK_CHIPRESET, chan ? chan->ic_freq : 0);
/*
* Reset the HW
*/
if (!ar5312SetResetReg(ah, AR_RC_MAC | AR_RC_BB)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetResetReg failed\n",
__func__);
return AH_FALSE;
}
/* Bring out of sleep mode (AGAIN) */
if (!ar5312SetPowerMode(ah, HAL_PM_AWAKE, AH_TRUE)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetPowerMode failed\n",
__func__);
return AH_FALSE;
}
/* Clear warm reset register */
if (!ar5312SetResetReg(ah, 0)) {
HALDEBUG(ah, HAL_DEBUG_ANY, "%s: ar5312SetResetReg failed\n",
__func__);
return AH_FALSE;
}
/*
* Perform warm reset before the mode/PLL/turbo registers
* are changed in order to deactivate the radio. Mode changes
* with an active radio can result in corrupted shifts to the
* radio device.
*/
/*
* Set CCK and Turbo modes correctly.
*/
if (chan != AH_NULL) { /* NB: can be null during attach */
uint32_t rfMode, phyPLL = 0, curPhyPLL, turbo;
if (IS_RAD5112_ANY(ah)) {
rfMode = AR_PHY_MODE_AR5112;
if (!IS_5315(ah)) {
if (IEEE80211_IS_CHAN_CCK(chan)) {
phyPLL = AR_PHY_PLL_CTL_44_5312;
} else {
if (IEEE80211_IS_CHAN_HALF(chan)) {
phyPLL = AR_PHY_PLL_CTL_40_5312_HALF;
} else if (IEEE80211_IS_CHAN_QUARTER(chan)) {
phyPLL = AR_PHY_PLL_CTL_40_5312_QUARTER;
} else {
phyPLL = AR_PHY_PLL_CTL_40_5312;
}
}
} else {
if (IEEE80211_IS_CHAN_CCK(chan))
phyPLL = AR_PHY_PLL_CTL_44_5112;
else
phyPLL = AR_PHY_PLL_CTL_40_5112;
if (IEEE80211_IS_CHAN_HALF(chan))
phyPLL |= AR_PHY_PLL_CTL_HALF;
else if (IEEE80211_IS_CHAN_QUARTER(chan))
phyPLL |= AR_PHY_PLL_CTL_QUARTER;
}
} else {
rfMode = AR_PHY_MODE_AR5111;
if (IEEE80211_IS_CHAN_CCK(chan))
phyPLL = AR_PHY_PLL_CTL_44;
else
phyPLL = AR_PHY_PLL_CTL_40;
if (IEEE80211_IS_CHAN_HALF(chan))
phyPLL = AR_PHY_PLL_CTL_HALF;
else if (IEEE80211_IS_CHAN_QUARTER(chan))
phyPLL = AR_PHY_PLL_CTL_QUARTER;
}
if (IEEE80211_IS_CHAN_G(chan))
rfMode |= AR_PHY_MODE_DYNAMIC;
else if (IEEE80211_IS_CHAN_OFDM(chan))
rfMode |= AR_PHY_MODE_OFDM;
else
rfMode |= AR_PHY_MODE_CCK;
if (IEEE80211_IS_CHAN_5GHZ(chan))
rfMode |= AR_PHY_MODE_RF5GHZ;
else
rfMode |= AR_PHY_MODE_RF2GHZ;
turbo = IEEE80211_IS_CHAN_TURBO(chan) ?
(AR_PHY_FC_TURBO_MODE | AR_PHY_FC_TURBO_SHORT) : 0;
curPhyPLL = OS_REG_READ(ah, AR_PHY_PLL_CTL);
/*
* PLL, Mode, and Turbo values must be written in the correct
* order to ensure:
* - The PLL cannot be set to 44 unless the CCK or DYNAMIC
* mode bit is set
* - Turbo cannot be set at the same time as CCK or DYNAMIC
*/
if (IEEE80211_IS_CHAN_CCK(chan)) {
OS_REG_WRITE(ah, AR_PHY_TURBO, turbo);
OS_REG_WRITE(ah, AR_PHY_MODE, rfMode);
if (curPhyPLL != phyPLL) {
OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL);
/* Wait for the PLL to settle */
OS_DELAY(PLL_SETTLE_DELAY);
}
} else {
if (curPhyPLL != phyPLL) {
OS_REG_WRITE(ah, AR_PHY_PLL_CTL, phyPLL);
/* Wait for the PLL to settle */
OS_DELAY(PLL_SETTLE_DELAY);
}
OS_REG_WRITE(ah, AR_PHY_TURBO, turbo);
OS_REG_WRITE(ah, AR_PHY_MODE, rfMode);
}
}
return AH_TRUE;
}
/*
* Write the given reset bit mask into the reset register
*/
static HAL_BOOL
ar5312SetResetReg(struct ath_hal *ah, uint32_t resetMask)
{
uint32_t mask = resetMask ? resetMask : ~0;
HAL_BOOL rt;
if ((rt = ar5312MacReset(ah, mask)) == AH_FALSE) {
return rt;
}
if ((resetMask & AR_RC_MAC) == 0) {
if (isBigEndian()) {
/*
* Set CFG, little-endian for register
* and descriptor accesses.
*/
#ifdef AH_NEED_DESC_SWAP
mask = INIT_CONFIG_STATUS | AR_CFG_SWRD;
#else
mask = INIT_CONFIG_STATUS |
AR_CFG_SWTD | AR_CFG_SWRD;
#endif
OS_REG_WRITE(ah, AR_CFG, mask);
} else
OS_REG_WRITE(ah, AR_CFG, INIT_CONFIG_STATUS);
}
return rt;
}
/*
* ar5312MacReset resets (and then un-resets) the specified
* wireless components.
* Note: The RCMask cannot be zero on entering from ar5312SetResetReg.
*/
HAL_BOOL
ar5312MacReset(struct ath_hal *ah, unsigned int RCMask)
{
int wlanNum = AR5312_UNIT(ah);
uint32_t resetBB, resetBits, regMask;
uint32_t reg;
if (RCMask == 0)
return(AH_FALSE);
#if ( AH_SUPPORT_2316 || AH_SUPPORT_2317 )
if (IS_5315(ah)) {
switch(wlanNum) {
case 0:
resetBB = AR5315_RC_BB0_CRES | AR5315_RC_WBB0_RES;
/* Warm and cold reset bits for wbb */
resetBits = AR5315_RC_WMAC0_RES;
break;
case 1:
resetBB = AR5315_RC_BB1_CRES | AR5315_RC_WBB1_RES;
/* Warm and cold reset bits for wbb */
resetBits = AR5315_RC_WMAC1_RES;
break;
default:
return(AH_FALSE);
}
regMask = ~(resetBB | resetBits);
/* read before */
reg = OS_REG_READ(ah,
(AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh) + AR5315_RESET));
if (RCMask == AR_RC_BB) {
/* Put baseband in reset */
reg |= resetBB; /* Cold and warm reset the baseband bits */
} else {
/*
* Reset the MAC and baseband. This is a bit different than
* the PCI version, but holding in reset causes problems.
*/
reg &= regMask;
reg |= (resetBits | resetBB) ;
}
OS_REG_WRITE(ah,
(AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5315_RESET),
reg);
/* read after */
OS_REG_READ(ah,
(AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh) +AR5315_RESET));
OS_DELAY(100);
/* Bring MAC and baseband out of reset */
reg &= regMask;
/* read before */
OS_REG_READ(ah,
(AR5315_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5315_RESET));
OS_REG_WRITE(ah,
(AR5315_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5315_RESET),
reg);
/* read after */
OS_REG_READ(ah,
(AR5315_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5315_RESET));
}
else
#endif
{
switch(wlanNum) {
case 0:
resetBB = AR5312_RC_BB0_CRES | AR5312_RC_WBB0_RES;
/* Warm and cold reset bits for wbb */
resetBits = AR5312_RC_WMAC0_RES;
break;
case 1:
resetBB = AR5312_RC_BB1_CRES | AR5312_RC_WBB1_RES;
/* Warm and cold reset bits for wbb */
resetBits = AR5312_RC_WMAC1_RES;
break;
default:
return(AH_FALSE);
}
regMask = ~(resetBB | resetBits);
/* read before */
reg = OS_REG_READ(ah,
(AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh) + AR5312_RESET));
if (RCMask == AR_RC_BB) {
/* Put baseband in reset */
reg |= resetBB; /* Cold and warm reset the baseband bits */
} else {
/*
* Reset the MAC and baseband. This is a bit different than
* the PCI version, but holding in reset causes problems.
*/
reg &= regMask;
reg |= (resetBits | resetBB) ;
}
OS_REG_WRITE(ah,
(AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5312_RESET),
reg);
/* read after */
OS_REG_READ(ah,
(AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh) +AR5312_RESET));
OS_DELAY(100);
/* Bring MAC and baseband out of reset */
reg &= regMask;
/* read before */
OS_REG_READ(ah,
(AR5312_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5312_RESET));
OS_REG_WRITE(ah,
(AR5312_RSTIMER_BASE - ((uint32_t) ah->ah_sh)+AR5312_RESET),
reg);
/* read after */
OS_REG_READ(ah,
(AR5312_RSTIMER_BASE- ((uint32_t) ah->ah_sh) +AR5312_RESET));
}
return(AH_TRUE);
}
#endif /* AH_SUPPORT_AR5312 */